1 #ifndef _ASM_X86_VISWS_COBALT_H
2 #define _ASM_X86_VISWS_COBALT_H
3
4 #include <asm/fixmap.h>
5
6 /*
7 * Cobalt SGI Visual Workstation system ASIC
8 */
9
10 #define CO_CPU_NUM_PHYS 0x1e00
11 #define CO_CPU_TAB_PHYS (CO_CPU_NUM_PHYS + 2)
12
13 #define CO_CPU_MAX 4
14
15 #define CO_CPU_PHYS 0xc2000000
16 #define CO_APIC_PHYS 0xc4000000
17
18 /* see set_fixmap() and asm/fixmap.h */
19 #define CO_CPU_VADDR (fix_to_virt(FIX_CO_CPU))
20 #define CO_APIC_VADDR (fix_to_virt(FIX_CO_APIC))
21
22 /* Cobalt CPU registers -- relative to CO_CPU_VADDR, use co_cpu_*() */
23 #define CO_CPU_REV 0x08
24 #define CO_CPU_CTRL 0x10
25 #define CO_CPU_STAT 0x20
26 #define CO_CPU_TIMEVAL 0x30
27
28 /* CO_CPU_CTRL bits */
29 #define CO_CTRL_TIMERUN 0x04 /* 0 == disabled */
30 #define CO_CTRL_TIMEMASK 0x08 /* 0 == unmasked */
31
32 /* CO_CPU_STATUS bits */
33 #define CO_STAT_TIMEINTR 0x02 /* (r) 1 == int pend, (w) 0 == clear */
34
35 /* CO_CPU_TIMEVAL value */
36 #define CO_TIME_HZ 100000000 /* Cobalt core rate */
37
38 /* Cobalt APIC registers -- relative to CO_APIC_VADDR, use co_apic_*() */
39 #define CO_APIC_HI(n) (((n) * 0x10) + 4)
40 #define CO_APIC_LO(n) ((n) * 0x10)
41 #define CO_APIC_ID 0x0ffc
42
43 /* CO_APIC_ID bits */
44 #define CO_APIC_ENABLE 0x00000100
45
46 /* CO_APIC_LO bits */
47 #define CO_APIC_MASK 0x00010000 /* 0 = enabled */
48 #define CO_APIC_LEVEL 0x00008000 /* 0 = edge */
49
50 /*
51 * Where things are physically wired to Cobalt
52 * #defines with no board _<type>_<rev>_ are common to all (thus far)
53 */
54 #define CO_APIC_IDE0 4
55 #define CO_APIC_IDE1 2 /* Only on 320 */
56
57 #define CO_APIC_8259 12 /* serial, floppy, par-l-l */
58
59 /* Lithium PCI Bridge A -- "the one with 82557 Ethernet" */
60 #define CO_APIC_PCIA_BASE0 0 /* and 1 */ /* slot 0, line 0 */
61 #define CO_APIC_PCIA_BASE123 5 /* and 6 */ /* slot 0, line 1 */
62
63 #define CO_APIC_PIIX4_USB 7 /* this one is weird */
64
65 /* Lithium PCI Bridge B -- "the one with PIIX4" */
66 #define CO_APIC_PCIB_BASE0 8 /* and 9-12 *//* slot 0, line 0 */
67 #define CO_APIC_PCIB_BASE123 13 /* 14.15 */ /* slot 0, line 1 */
68
69 #define CO_APIC_VIDOUT0 16
70 #define CO_APIC_VIDOUT1 17
71 #define CO_APIC_VIDIN0 18
72 #define CO_APIC_VIDIN1 19
73
74 #define CO_APIC_LI_AUDIO 22
75
76 #define CO_APIC_AS 24
77 #define CO_APIC_RE 25
78
79 #define CO_APIC_CPU 28 /* Timer and Cache interrupt */
80 #define CO_APIC_NMI 29
81 #define CO_APIC_LAST CO_APIC_NMI
82
83 /*
84 * This is how irqs are assigned on the Visual Workstation.
85 * Legacy devices get irq's 1-15 (system clock is 0 and is CO_APIC_CPU).
86 * All other devices (including PCI) go to Cobalt and are irq's 16 on up.
87 */
88 #define CO_IRQ_APIC0 16 /* irq of apic entry 0 */
89 #define IS_CO_APIC(irq) ((irq) >= CO_IRQ_APIC0)
90 #define CO_IRQ(apic) (CO_IRQ_APIC0 + (apic)) /* apic ent to irq */
91 #define CO_APIC(irq) ((irq) - CO_IRQ_APIC0) /* irq to apic ent */
92 #define CO_IRQ_IDE0 14 /* knowledge of... */
93 #define CO_IRQ_IDE1 15 /* ... ide driver defaults! */
94 #define CO_IRQ_8259 CO_IRQ(CO_APIC_8259)
95
96 #ifdef CONFIG_X86_VISWS_APIC
co_cpu_write(unsigned long reg,unsigned long v)97 static inline void co_cpu_write(unsigned long reg, unsigned long v)
98 {
99 *((volatile unsigned long *)(CO_CPU_VADDR+reg))=v;
100 }
101
co_cpu_read(unsigned long reg)102 static inline unsigned long co_cpu_read(unsigned long reg)
103 {
104 return *((volatile unsigned long *)(CO_CPU_VADDR+reg));
105 }
106
co_apic_write(unsigned long reg,unsigned long v)107 static inline void co_apic_write(unsigned long reg, unsigned long v)
108 {
109 *((volatile unsigned long *)(CO_APIC_VADDR+reg))=v;
110 }
111
co_apic_read(unsigned long reg)112 static inline unsigned long co_apic_read(unsigned long reg)
113 {
114 return *((volatile unsigned long *)(CO_APIC_VADDR+reg));
115 }
116 #endif
117
118 extern char visws_board_type;
119
120 #define VISWS_320 0
121 #define VISWS_540 1
122
123 extern char visws_board_rev;
124
125 #endif /* _ASM_X86_VISWS_COBALT_H */
126