1 /* 2 Written 1994 by David C. Davies. 3 4 Copyright 1994 David C. Davies. This software may be used and distributed 5 according to the terms of the GNU General Public License, incorporated herein by 6 reference. 7 */ 8 9 /* 10 ** I/O addresses. Note that the 2k buffer option is not supported in 11 ** this driver. 12 */ 13 #define DEPCA_NICSR ioaddr+0x00 /* Network interface CSR */ 14 #define DEPCA_RBI ioaddr+0x02 /* RAM buffer index (2k buffer mode) */ 15 #define DEPCA_DATA ioaddr+0x04 /* LANCE registers' data port */ 16 #define DEPCA_ADDR ioaddr+0x06 /* LANCE registers' address port */ 17 #define DEPCA_HBASE ioaddr+0x08 /* EISA high memory base address reg. */ 18 #define DEPCA_PROM ioaddr+0x0c /* Ethernet address ROM data port */ 19 #define DEPCA_CNFG ioaddr+0x0c /* EISA Configuration port */ 20 #define DEPCA_RBSA ioaddr+0x0e /* RAM buffer starting address (2k buff.) */ 21 22 /* 23 ** These are LANCE registers addressable through DEPCA_ADDR 24 */ 25 #define CSR0 0 26 #define CSR1 1 27 #define CSR2 2 28 #define CSR3 3 29 30 /* 31 ** NETWORK INTERFACE CSR (NI_CSR) bit definitions 32 */ 33 34 #define TO 0x0100 /* Time Out for remote boot */ 35 #define SHE 0x0080 /* SHadow memory Enable */ 36 #define BS 0x0040 /* Bank Select */ 37 #define BUF 0x0020 /* BUFfer size (1->32k, 0->64k) */ 38 #define RBE 0x0010 /* Remote Boot Enable (1->net boot) */ 39 #define AAC 0x0008 /* Address ROM Address Counter (1->enable) */ 40 #define _128KB 0x0008 /* 128kB Network RAM (1->enable) */ 41 #define IM 0x0004 /* Interrupt Mask (1->mask) */ 42 #define IEN 0x0002 /* Interrupt tristate ENable (1->enable) */ 43 #define LED 0x0001 /* LED control */ 44 45 /* 46 ** Control and Status Register 0 (CSR0) bit definitions 47 */ 48 49 #define ERR 0x8000 /* Error summary */ 50 #define BABL 0x4000 /* Babble transmitter timeout error */ 51 #define CERR 0x2000 /* Collision Error */ 52 #define MISS 0x1000 /* Missed packet */ 53 #define MERR 0x0800 /* Memory Error */ 54 #define RINT 0x0400 /* Receiver Interrupt */ 55 #define TINT 0x0200 /* Transmit Interrupt */ 56 #define IDON 0x0100 /* Initialization Done */ 57 #define INTR 0x0080 /* Interrupt Flag */ 58 #define INEA 0x0040 /* Interrupt Enable */ 59 #define RXON 0x0020 /* Receiver on */ 60 #define TXON 0x0010 /* Transmitter on */ 61 #define TDMD 0x0008 /* Transmit Demand */ 62 #define STOP 0x0004 /* Stop */ 63 #define STRT 0x0002 /* Start */ 64 #define INIT 0x0001 /* Initialize */ 65 #define INTM 0xff00 /* Interrupt Mask */ 66 #define INTE 0xfff0 /* Interrupt Enable */ 67 68 /* 69 ** CONTROL AND STATUS REGISTER 3 (CSR3) 70 */ 71 72 #define BSWP 0x0004 /* Byte SWaP */ 73 #define ACON 0x0002 /* ALE control */ 74 #define BCON 0x0001 /* Byte CONtrol */ 75 76 /* 77 ** Initialization Block Mode Register 78 */ 79 80 #define PROM 0x8000 /* Promiscuous Mode */ 81 #define EMBA 0x0080 /* Enable Modified Back-off Algorithm */ 82 #define INTL 0x0040 /* Internal Loopback */ 83 #define DRTY 0x0020 /* Disable Retry */ 84 #define COLL 0x0010 /* Force Collision */ 85 #define DTCR 0x0008 /* Disable Transmit CRC */ 86 #define LOOP 0x0004 /* Loopback */ 87 #define DTX 0x0002 /* Disable the Transmitter */ 88 #define DRX 0x0001 /* Disable the Receiver */ 89 90 /* 91 ** Receive Message Descriptor 1 (RMD1) bit definitions. 92 */ 93 94 #define R_OWN 0x80000000 /* Owner bit 0 = host, 1 = lance */ 95 #define R_ERR 0x4000 /* Error Summary */ 96 #define R_FRAM 0x2000 /* Framing Error */ 97 #define R_OFLO 0x1000 /* Overflow Error */ 98 #define R_CRC 0x0800 /* CRC Error */ 99 #define R_BUFF 0x0400 /* Buffer Error */ 100 #define R_STP 0x0200 /* Start of Packet */ 101 #define R_ENP 0x0100 /* End of Packet */ 102 103 /* 104 ** Transmit Message Descriptor 1 (TMD1) bit definitions. 105 */ 106 107 #define T_OWN 0x80000000 /* Owner bit 0 = host, 1 = lance */ 108 #define T_ERR 0x4000 /* Error Summary */ 109 #define T_ADD_FCS 0x2000 /* More the 1 retry needed to Xmit */ 110 #define T_MORE 0x1000 /* >1 retry to transmit packet */ 111 #define T_ONE 0x0800 /* 1 try needed to transmit the packet */ 112 #define T_DEF 0x0400 /* Deferred */ 113 #define T_STP 0x02000000 /* Start of Packet */ 114 #define T_ENP 0x01000000 /* End of Packet */ 115 #define T_FLAGS 0xff000000 /* TX Flags Field */ 116 117 /* 118 ** Transmit Message Descriptor 3 (TMD3) bit definitions. 119 */ 120 121 #define TMD3_BUFF 0x8000 /* BUFFer error */ 122 #define TMD3_UFLO 0x4000 /* UnderFLOw error */ 123 #define TMD3_RES 0x2000 /* REServed */ 124 #define TMD3_LCOL 0x1000 /* Late COLlision */ 125 #define TMD3_LCAR 0x0800 /* Loss of CARrier */ 126 #define TMD3_RTRY 0x0400 /* ReTRY error */ 127 128 /* 129 ** EISA configuration Register (CNFG) bit definitions 130 */ 131 132 #define TIMEOUT 0x0100 /* 0:2.5 mins, 1: 30 secs */ 133 #define REMOTE 0x0080 /* Remote Boot Enable -> 1 */ 134 #define IRQ11 0x0040 /* Enable -> 1 */ 135 #define IRQ10 0x0020 /* Enable -> 1 */ 136 #define IRQ9 0x0010 /* Enable -> 1 */ 137 #define IRQ5 0x0008 /* Enable -> 1 */ 138 #define BUFF 0x0004 /* 0: 64kB or 128kB, 1: 32kB */ 139 #define PADR16 0x0002 /* RAM on 64kB boundary */ 140 #define PADR17 0x0001 /* RAM on 128kB boundary */ 141 142 /* 143 ** Miscellaneous 144 */ 145 #define HASH_TABLE_LEN 64 /* Bits */ 146 #define HASH_BITS 0x003f /* 6 LS bits */ 147 148 #define MASK_INTERRUPTS 1 149 #define UNMASK_INTERRUPTS 0 150 151 #define EISA_EN 0x0001 /* Enable EISA bus buffers */ 152 #define EISA_ID iobase+0x0080 /* ID long word for EISA card */ 153 #define EISA_CTRL iobase+0x0084 /* Control word for EISA card */ 154 155 /* 156 ** Include the IOCTL stuff 157 */ 158 #include <linux/sockios.h> 159 160 #define DEPCAIOCTL SIOCDEVPRIVATE 161 162 struct depca_ioctl { 163 unsigned short cmd; /* Command to run */ 164 unsigned short len; /* Length of the data buffer */ 165 unsigned char __user *data; /* Pointer to the data buffer */ 166 }; 167 168 /* 169 ** Recognised commands for the driver 170 */ 171 #define DEPCA_GET_HWADDR 0x01 /* Get the hardware address */ 172 #define DEPCA_SET_HWADDR 0x02 /* Get the hardware address */ 173 #define DEPCA_SET_PROM 0x03 /* Set Promiscuous Mode */ 174 #define DEPCA_CLR_PROM 0x04 /* Clear Promiscuous Mode */ 175 #define DEPCA_SAY_BOO 0x05 /* Say "Boo!" to the kernel log file */ 176 #define DEPCA_GET_MCA 0x06 /* Get a multicast address */ 177 #define DEPCA_SET_MCA 0x07 /* Set a multicast address */ 178 #define DEPCA_CLR_MCA 0x08 /* Clear a multicast address */ 179 #define DEPCA_MCA_EN 0x09 /* Enable a multicast address group */ 180 #define DEPCA_GET_STATS 0x0a /* Get the driver statistics */ 181 #define DEPCA_CLR_STATS 0x0b /* Zero out the driver statistics */ 182 #define DEPCA_GET_REG 0x0c /* Get the Register contents */ 183 #define DEPCA_SET_REG 0x0d /* Set the Register contents */ 184 #define DEPCA_DUMP 0x0f /* Dump the DEPCA Status */ 185 186