1 /* arch/arm/mach-s3c2410/include/mach/regs-irq.h 2 * 3 * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk> 4 * http://www.simtec.co.uk/products/SWLINUX/ 5 * 6 * This program is free software; you can redistribute it and/or modify 7 * it under the terms of the GNU General Public License version 2 as 8 * published by the Free Software Foundation. 9 */ 10 11 12 #ifndef ___ASM_ARCH_REGS_IRQ_H 13 #define ___ASM_ARCH_REGS_IRQ_H 14 15 /* interrupt controller */ 16 17 #define S3C2410_IRQREG(x) ((x) + S3C24XX_VA_IRQ) 18 #define S3C2410_EINTREG(x) ((x) + S3C24XX_VA_GPIO) 19 #define S3C24XX_EINTREG(x) ((x) + S3C24XX_VA_GPIO2) 20 21 #define S3C2410_SRCPND S3C2410_IRQREG(0x000) 22 #define S3C2410_INTMOD S3C2410_IRQREG(0x004) 23 #define S3C2410_INTMSK S3C2410_IRQREG(0x008) 24 #define S3C2410_PRIORITY S3C2410_IRQREG(0x00C) 25 #define S3C2410_INTPND S3C2410_IRQREG(0x010) 26 #define S3C2410_INTOFFSET S3C2410_IRQREG(0x014) 27 #define S3C2410_SUBSRCPND S3C2410_IRQREG(0x018) 28 #define S3C2410_INTSUBMSK S3C2410_IRQREG(0x01C) 29 30 /* mask: 0=enable, 1=disable 31 * 1 bit EINT, 4=EINT4, 23=EINT23 32 * EINT0,1,2,3 are not handled here. 33 */ 34 35 #define S3C2410_EINTMASK S3C2410_EINTREG(0x0A4) 36 #define S3C2410_EINTPEND S3C2410_EINTREG(0X0A8) 37 #define S3C2412_EINTMASK S3C2410_EINTREG(0x0B4) 38 #define S3C2412_EINTPEND S3C2410_EINTREG(0X0B8) 39 40 #define S3C24XX_EINTMASK S3C24XX_EINTREG(0x0A4) 41 #define S3C24XX_EINTPEND S3C24XX_EINTREG(0X0A8) 42 43 #endif /* ___ASM_ARCH_REGS_IRQ_H */ 44