• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1 /*
2  * linux/arch/arm/mach-sa1100/collie.c
3  *
4  * May be copied or modified under the terms of the GNU General Public
5  * License.  See linux/COPYING for more information.
6  *
7  * This file contains all Collie-specific tweaks.
8  *
9  * This program is free software; you can redistribute it and/or modify
10  * it under the terms of the GNU General Public License version 2 as
11  * published by the Free Software Foundation.
12  *
13  * ChangeLog:
14  *  2006 Pavel Machek <pavel@suse.cz>
15  *  03-06-2004 John Lenz <lenz@cs.wisc.edu>
16  *  06-04-2002 Chris Larson <kergoth@digitalnemesis.net>
17  *  04-16-2001 Lineo Japan,Inc. ...
18  */
19 
20 #include <linux/init.h>
21 #include <linux/kernel.h>
22 #include <linux/tty.h>
23 #include <linux/delay.h>
24 #include <linux/platform_device.h>
25 #include <linux/mtd/mtd.h>
26 #include <linux/mtd/partitions.h>
27 #include <linux/timer.h>
28 
29 #include <mach/hardware.h>
30 #include <asm/mach-types.h>
31 #include <asm/irq.h>
32 #include <asm/setup.h>
33 #include <mach/collie.h>
34 
35 #include <asm/mach/arch.h>
36 #include <asm/mach/flash.h>
37 #include <asm/mach/map.h>
38 #include <asm/mach/serial_sa1100.h>
39 
40 #include <asm/hardware/scoop.h>
41 #include <asm/mach/sharpsl_param.h>
42 #include <asm/hardware/locomo.h>
43 #include <mach/mcp.h>
44 
45 #include "generic.h"
46 
47 static struct resource collie_scoop_resources[] = {
48 	[0] = {
49 		.start		= 0x40800000,
50 		.end		= 0x40800fff,
51 		.flags		= IORESOURCE_MEM,
52 	},
53 };
54 
55 static struct scoop_config collie_scoop_setup = {
56 	.io_dir 	= COLLIE_SCOOP_IO_DIR,
57 	.io_out		= COLLIE_SCOOP_IO_OUT,
58 };
59 
60 struct platform_device colliescoop_device = {
61 	.name		= "sharp-scoop",
62 	.id		= -1,
63 	.dev		= {
64  		.platform_data	= &collie_scoop_setup,
65 	},
66 	.num_resources	= ARRAY_SIZE(collie_scoop_resources),
67 	.resource	= collie_scoop_resources,
68 };
69 
70 static struct scoop_pcmcia_dev collie_pcmcia_scoop[] = {
71 	{
72 	.dev		= &colliescoop_device.dev,
73 	.irq		= COLLIE_IRQ_GPIO_CF_IRQ,
74 	.cd_irq		= COLLIE_IRQ_GPIO_CF_CD,
75 	.cd_irq_str	= "PCMCIA0 CD",
76 	},
77 };
78 
79 static struct scoop_pcmcia_config collie_pcmcia_config = {
80 	.devs		= &collie_pcmcia_scoop[0],
81 	.num_devs	= 1,
82 };
83 
84 static struct mcp_plat_data collie_mcp_data = {
85 	.mccr0		= MCCR0_ADM | MCCR0_ExtClk,
86 	.sclk_rate	= 9216000,
87 };
88 
89 #ifdef CONFIG_SHARP_LOCOMO
90 /*
91  * low-level UART features.
92  */
93 struct platform_device collie_locomo_device;
94 
collie_uart_set_mctrl(struct uart_port * port,u_int mctrl)95 static void collie_uart_set_mctrl(struct uart_port *port, u_int mctrl)
96 {
97 	if (mctrl & TIOCM_RTS)
98 		locomo_gpio_write(&collie_locomo_device.dev, LOCOMO_GPIO_RTS, 0);
99 	else
100 		locomo_gpio_write(&collie_locomo_device.dev, LOCOMO_GPIO_RTS, 1);
101 
102 	if (mctrl & TIOCM_DTR)
103 		locomo_gpio_write(&collie_locomo_device.dev, LOCOMO_GPIO_DTR, 0);
104 	else
105 		locomo_gpio_write(&collie_locomo_device.dev, LOCOMO_GPIO_DTR, 1);
106 }
107 
collie_uart_get_mctrl(struct uart_port * port)108 static u_int collie_uart_get_mctrl(struct uart_port *port)
109 {
110 	int ret = TIOCM_CD;
111 	unsigned int r;
112 
113 	r = locomo_gpio_read_output(&collie_locomo_device.dev, LOCOMO_GPIO_CTS & LOCOMO_GPIO_DSR);
114 	if (r == -ENODEV)
115 		return ret;
116 	if (r & LOCOMO_GPIO_CTS)
117 		ret |= TIOCM_CTS;
118 	if (r & LOCOMO_GPIO_DSR)
119 		ret |= TIOCM_DSR;
120 
121 	return ret;
122 }
123 
124 static struct sa1100_port_fns collie_port_fns __initdata = {
125 	.set_mctrl	= collie_uart_set_mctrl,
126 	.get_mctrl	= collie_uart_get_mctrl,
127 };
128 
collie_uart_probe(struct locomo_dev * dev)129 static int collie_uart_probe(struct locomo_dev *dev)
130 {
131 	return 0;
132 }
133 
collie_uart_remove(struct locomo_dev * dev)134 static int collie_uart_remove(struct locomo_dev *dev)
135 {
136 	return 0;
137 }
138 
139 static struct locomo_driver collie_uart_driver = {
140 	.drv = {
141 		.name = "collie_uart",
142 	},
143 	.devid	= LOCOMO_DEVID_UART,
144 	.probe	= collie_uart_probe,
145 	.remove	= collie_uart_remove,
146 };
147 
collie_uart_init(void)148 static int __init collie_uart_init(void) {
149 	return locomo_driver_register(&collie_uart_driver);
150 }
151 device_initcall(collie_uart_init);
152 
153 #endif
154 
155 
156 static struct resource locomo_resources[] = {
157 	[0] = {
158 		.start		= 0x40000000,
159 		.end		= 0x40001fff,
160 		.flags		= IORESOURCE_MEM,
161 	},
162 	[1] = {
163 		.start		= IRQ_GPIO25,
164 		.end		= IRQ_GPIO25,
165 		.flags		= IORESOURCE_IRQ,
166 	},
167 };
168 
169 struct platform_device collie_locomo_device = {
170 	.name		= "locomo",
171 	.id		= 0,
172 	.num_resources	= ARRAY_SIZE(locomo_resources),
173 	.resource	= locomo_resources,
174 };
175 
176 static struct platform_device *devices[] __initdata = {
177 	&collie_locomo_device,
178 	&colliescoop_device,
179 };
180 
181 static struct mtd_partition collie_partitions[] = {
182 	{
183 		.name		= "bootloader",
184 		.offset 	= 0,
185 		.size		= 0x000C0000,
186 		.mask_flags	= MTD_WRITEABLE
187 	}, {
188 		.name		= "kernel",
189 		.offset 	= MTDPART_OFS_APPEND,
190 		.size		= 0x00100000,
191 	}, {
192 		.name		= "rootfs",
193 		.offset 	= MTDPART_OFS_APPEND,
194 		.size		= 0x00e20000,
195 	}
196 };
197 
collie_set_vpp(int vpp)198 static void collie_set_vpp(int vpp)
199 {
200 	write_scoop_reg(&colliescoop_device.dev, SCOOP_GPCR, read_scoop_reg(&colliescoop_device.dev, SCOOP_GPCR) | COLLIE_SCP_VPEN);
201 	if (vpp)
202 		write_scoop_reg(&colliescoop_device.dev, SCOOP_GPWR, read_scoop_reg(&colliescoop_device.dev, SCOOP_GPWR) | COLLIE_SCP_VPEN);
203 	else
204 		write_scoop_reg(&colliescoop_device.dev, SCOOP_GPWR, read_scoop_reg(&colliescoop_device.dev, SCOOP_GPWR) & ~COLLIE_SCP_VPEN);
205 }
206 
207 static struct flash_platform_data collie_flash_data = {
208 	.map_name	= "cfi_probe",
209 	.set_vpp	= collie_set_vpp,
210 	.parts		= collie_partitions,
211 	.nr_parts	= ARRAY_SIZE(collie_partitions),
212 };
213 
214 static struct resource collie_flash_resources[] = {
215 	{
216 		.start	= SA1100_CS0_PHYS,
217 		.end	= SA1100_CS0_PHYS + SZ_32M - 1,
218 		.flags	= IORESOURCE_MEM,
219 	}
220 };
221 
collie_init(void)222 static void __init collie_init(void)
223 {
224 	int ret = 0;
225 
226 	/* cpu initialize */
227 	GAFR = GPIO_SSP_TXD | GPIO_SSP_SCLK | GPIO_SSP_SFRM | GPIO_SSP_CLK |
228 		GPIO_MCP_CLK | GPIO_32_768kHz;
229 
230 	GPDR = GPIO_LDD8 | GPIO_LDD9 | GPIO_LDD10 | GPIO_LDD11 | GPIO_LDD12 |
231 		GPIO_LDD13 | GPIO_LDD14 | GPIO_LDD15 | GPIO_SSP_TXD |
232 		GPIO_SSP_SCLK | GPIO_SSP_SFRM | GPIO_SDLC_SCLK |
233 		COLLIE_GPIO_UCB1x00_RESET | COLLIE_GPIO_nMIC_ON |
234 		COLLIE_GPIO_nREMOCON_ON | GPIO_32_768kHz;
235 
236 	PPDR = PPC_LDD0 | PPC_LDD1 | PPC_LDD2 | PPC_LDD3 | PPC_LDD4 | PPC_LDD5 |
237 		PPC_LDD6 | PPC_LDD7 | PPC_L_PCLK | PPC_L_LCLK | PPC_L_FCLK | PPC_L_BIAS |
238 		PPC_TXD1 | PPC_TXD2 | PPC_TXD3 | PPC_TXD4 | PPC_SCLK | PPC_SFRM;
239 
240 	PWER = COLLIE_GPIO_AC_IN | COLLIE_GPIO_CO | COLLIE_GPIO_ON_KEY |
241 		COLLIE_GPIO_WAKEUP | COLLIE_GPIO_nREMOCON_INT | PWER_RTC;
242 
243 	PGSR = COLLIE_GPIO_nREMOCON_ON;
244 
245 	PSDR = PPC_RXD1 | PPC_RXD2 | PPC_RXD3 | PPC_RXD4;
246 
247 	PCFR = PCFR_OPDE;
248 
249 
250 	platform_scoop_config = &collie_pcmcia_config;
251 
252 	ret = platform_add_devices(devices, ARRAY_SIZE(devices));
253 	if (ret) {
254 		printk(KERN_WARNING "collie: Unable to register LoCoMo device\n");
255 	}
256 
257 	sa11x0_set_flash_data(&collie_flash_data, collie_flash_resources,
258 			      ARRAY_SIZE(collie_flash_resources));
259 	sa11x0_set_mcp_data(&collie_mcp_data);
260 
261 	sharpsl_save_param();
262 }
263 
264 static struct map_desc collie_io_desc[] __initdata = {
265 	{	/* 32M main flash (cs0) */
266 		.virtual	= 0xe8000000,
267 		.pfn		= __phys_to_pfn(0x00000000),
268 		.length		= 0x02000000,
269 		.type		= MT_DEVICE
270 	}, {	/* 32M boot flash (cs1) */
271 		.virtual	= 0xea000000,
272 		.pfn		= __phys_to_pfn(0x08000000),
273 		.length		= 0x02000000,
274 		.type		= MT_DEVICE
275 	}
276 };
277 
collie_map_io(void)278 static void __init collie_map_io(void)
279 {
280 	sa1100_map_io();
281 	iotable_init(collie_io_desc, ARRAY_SIZE(collie_io_desc));
282 
283 #ifdef CONFIG_SHARP_LOCOMO
284 	sa1100_register_uart_fns(&collie_port_fns);
285 #endif
286 	sa1100_register_uart(0, 3);
287 	sa1100_register_uart(1, 1);
288 }
289 
290 MACHINE_START(COLLIE, "Sharp-Collie")
291 	.phys_io	= 0x80000000,
292 	.io_pg_offst	= ((0xf8000000) >> 18) & 0xfffc,
293 	.map_io		= collie_map_io,
294 	.init_irq	= sa1100_init_irq,
295 	.timer		= &sa1100_timer,
296 	.init_machine	= collie_init,
297 MACHINE_END
298