• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1 #include <linux/kernel.h>
2 #include <linux/ide.h>
3 #include <linux/hdreg.h>
4 
generic_ide_suspend(struct device * dev,pm_message_t mesg)5 int generic_ide_suspend(struct device *dev, pm_message_t mesg)
6 {
7 	ide_drive_t *drive = dev->driver_data, *pair = ide_get_pair_dev(drive);
8 	ide_hwif_t *hwif = drive->hwif;
9 	struct request *rq;
10 	struct request_pm_state rqpm;
11 	ide_task_t args;
12 	int ret;
13 
14 	/* call ACPI _GTM only once */
15 	if ((drive->dn & 1) == 0 || pair == NULL)
16 		ide_acpi_get_timing(hwif);
17 
18 	memset(&rqpm, 0, sizeof(rqpm));
19 	memset(&args, 0, sizeof(args));
20 	rq = blk_get_request(drive->queue, READ, __GFP_WAIT);
21 	rq->cmd_type = REQ_TYPE_PM_SUSPEND;
22 	rq->special = &args;
23 	rq->data = &rqpm;
24 	rqpm.pm_step = IDE_PM_START_SUSPEND;
25 	if (mesg.event == PM_EVENT_PRETHAW)
26 		mesg.event = PM_EVENT_FREEZE;
27 	rqpm.pm_state = mesg.event;
28 
29 	ret = blk_execute_rq(drive->queue, NULL, rq, 0);
30 	blk_put_request(rq);
31 
32 	/* call ACPI _PS3 only after both devices are suspended */
33 	if (ret == 0 && ((drive->dn & 1) || pair == NULL))
34 		ide_acpi_set_state(hwif, 0);
35 
36 	return ret;
37 }
38 
generic_ide_resume(struct device * dev)39 int generic_ide_resume(struct device *dev)
40 {
41 	ide_drive_t *drive = dev->driver_data, *pair = ide_get_pair_dev(drive);
42 	ide_hwif_t *hwif = drive->hwif;
43 	struct request *rq;
44 	struct request_pm_state rqpm;
45 	ide_task_t args;
46 	int err;
47 
48 	/* call ACPI _PS0 / _STM only once */
49 	if ((drive->dn & 1) == 0 || pair == NULL) {
50 		ide_acpi_set_state(hwif, 1);
51 		ide_acpi_push_timing(hwif);
52 	}
53 
54 	ide_acpi_exec_tfs(drive);
55 
56 	memset(&rqpm, 0, sizeof(rqpm));
57 	memset(&args, 0, sizeof(args));
58 	rq = blk_get_request(drive->queue, READ, __GFP_WAIT);
59 	rq->cmd_type = REQ_TYPE_PM_RESUME;
60 	rq->cmd_flags |= REQ_PREEMPT;
61 	rq->special = &args;
62 	rq->data = &rqpm;
63 	rqpm.pm_step = IDE_PM_START_RESUME;
64 	rqpm.pm_state = PM_EVENT_ON;
65 
66 	err = blk_execute_rq(drive->queue, NULL, rq, 1);
67 	blk_put_request(rq);
68 
69 	if (err == 0 && dev->driver) {
70 		struct ide_driver *drv = to_ide_driver(dev->driver);
71 
72 		if (drv->resume)
73 			drv->resume(drive);
74 	}
75 
76 	return err;
77 }
78 
ide_complete_power_step(ide_drive_t * drive,struct request * rq)79 void ide_complete_power_step(ide_drive_t *drive, struct request *rq)
80 {
81 	struct request_pm_state *pm = rq->data;
82 
83 #ifdef DEBUG_PM
84 	printk(KERN_INFO "%s: complete_power_step(step: %d)\n",
85 		drive->name, pm->pm_step);
86 #endif
87 	if (drive->media != ide_disk)
88 		return;
89 
90 	switch (pm->pm_step) {
91 	case IDE_PM_FLUSH_CACHE:	/* Suspend step 1 (flush cache) */
92 		if (pm->pm_state == PM_EVENT_FREEZE)
93 			pm->pm_step = IDE_PM_COMPLETED;
94 		else
95 			pm->pm_step = IDE_PM_STANDBY;
96 		break;
97 	case IDE_PM_STANDBY:		/* Suspend step 2 (standby) */
98 		pm->pm_step = IDE_PM_COMPLETED;
99 		break;
100 	case IDE_PM_RESTORE_PIO:	/* Resume step 1 (restore PIO) */
101 		pm->pm_step = IDE_PM_IDLE;
102 		break;
103 	case IDE_PM_IDLE:		/* Resume step 2 (idle)*/
104 		pm->pm_step = IDE_PM_RESTORE_DMA;
105 		break;
106 	}
107 }
108 
ide_start_power_step(ide_drive_t * drive,struct request * rq)109 ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request *rq)
110 {
111 	struct request_pm_state *pm = rq->data;
112 	ide_task_t *args = rq->special;
113 
114 	memset(args, 0, sizeof(*args));
115 
116 	switch (pm->pm_step) {
117 	case IDE_PM_FLUSH_CACHE:	/* Suspend step 1 (flush cache) */
118 		if (drive->media != ide_disk)
119 			break;
120 		/* Not supported? Switch to next step now. */
121 		if (ata_id_flush_enabled(drive->id) == 0 ||
122 		    (drive->dev_flags & IDE_DFLAG_WCACHE) == 0) {
123 			ide_complete_power_step(drive, rq);
124 			return ide_stopped;
125 		}
126 		if (ata_id_flush_ext_enabled(drive->id))
127 			args->tf.command = ATA_CMD_FLUSH_EXT;
128 		else
129 			args->tf.command = ATA_CMD_FLUSH;
130 		goto out_do_tf;
131 	case IDE_PM_STANDBY:		/* Suspend step 2 (standby) */
132 		args->tf.command = ATA_CMD_STANDBYNOW1;
133 		goto out_do_tf;
134 	case IDE_PM_RESTORE_PIO:	/* Resume step 1 (restore PIO) */
135 		ide_set_max_pio(drive);
136 		/*
137 		 * skip IDE_PM_IDLE for ATAPI devices
138 		 */
139 		if (drive->media != ide_disk)
140 			pm->pm_step = IDE_PM_RESTORE_DMA;
141 		else
142 			ide_complete_power_step(drive, rq);
143 		return ide_stopped;
144 	case IDE_PM_IDLE:		/* Resume step 2 (idle) */
145 		args->tf.command = ATA_CMD_IDLEIMMEDIATE;
146 		goto out_do_tf;
147 	case IDE_PM_RESTORE_DMA:	/* Resume step 3 (restore DMA) */
148 		/*
149 		 * Right now, all we do is call ide_set_dma(drive),
150 		 * we could be smarter and check for current xfer_speed
151 		 * in struct drive etc...
152 		 */
153 		if (drive->hwif->dma_ops == NULL)
154 			break;
155 		/*
156 		 * TODO: respect IDE_DFLAG_USING_DMA
157 		 */
158 		ide_set_dma(drive);
159 		break;
160 	}
161 
162 	pm->pm_step = IDE_PM_COMPLETED;
163 	return ide_stopped;
164 
165 out_do_tf:
166 	args->tf_flags	 = IDE_TFLAG_TF | IDE_TFLAG_DEVICE;
167 	args->data_phase = TASKFILE_NO_DATA;
168 	return do_rw_taskfile(drive, args);
169 }
170 
171 /**
172  *	ide_complete_pm_request - end the current Power Management request
173  *	@drive: target drive
174  *	@rq: request
175  *
176  *	This function cleans up the current PM request and stops the queue
177  *	if necessary.
178  */
ide_complete_pm_request(ide_drive_t * drive,struct request * rq)179 void ide_complete_pm_request(ide_drive_t *drive, struct request *rq)
180 {
181 	struct request_queue *q = drive->queue;
182 	unsigned long flags;
183 
184 #ifdef DEBUG_PM
185 	printk("%s: completing PM request, %s\n", drive->name,
186 	       blk_pm_suspend_request(rq) ? "suspend" : "resume");
187 #endif
188 	spin_lock_irqsave(q->queue_lock, flags);
189 	if (blk_pm_suspend_request(rq))
190 		blk_stop_queue(q);
191 	else
192 		drive->dev_flags &= ~IDE_DFLAG_BLOCKED;
193 	spin_unlock_irqrestore(q->queue_lock, flags);
194 
195 	drive->hwif->rq = NULL;
196 
197 	if (blk_end_request(rq, 0, 0))
198 		BUG();
199 }
200 
ide_check_pm_state(ide_drive_t * drive,struct request * rq)201 void ide_check_pm_state(ide_drive_t *drive, struct request *rq)
202 {
203 	struct request_pm_state *pm = rq->data;
204 
205 	if (blk_pm_suspend_request(rq) &&
206 	    pm->pm_step == IDE_PM_START_SUSPEND)
207 		/* Mark drive blocked when starting the suspend sequence. */
208 		drive->dev_flags |= IDE_DFLAG_BLOCKED;
209 	else if (blk_pm_resume_request(rq) &&
210 		 pm->pm_step == IDE_PM_START_RESUME) {
211 		/*
212 		 * The first thing we do on wakeup is to wait for BSY bit to
213 		 * go away (with a looong timeout) as a drive on this hwif may
214 		 * just be POSTing itself.
215 		 * We do that before even selecting as the "other" device on
216 		 * the bus may be broken enough to walk on our toes at this
217 		 * point.
218 		 */
219 		ide_hwif_t *hwif = drive->hwif;
220 		struct request_queue *q = drive->queue;
221 		unsigned long flags;
222 		int rc;
223 #ifdef DEBUG_PM
224 		printk("%s: Wakeup request inited, waiting for !BSY...\n", drive->name);
225 #endif
226 		rc = ide_wait_not_busy(hwif, 35000);
227 		if (rc)
228 			printk(KERN_WARNING "%s: bus not ready on wakeup\n", drive->name);
229 		SELECT_DRIVE(drive);
230 		hwif->tp_ops->set_irq(hwif, 1);
231 		rc = ide_wait_not_busy(hwif, 100000);
232 		if (rc)
233 			printk(KERN_WARNING "%s: drive not ready on wakeup\n", drive->name);
234 
235 		spin_lock_irqsave(q->queue_lock, flags);
236 		blk_start_queue(q);
237 		spin_unlock_irqrestore(q->queue_lock, flags);
238 	}
239 }
240