1 /* 2 * cbe_regs.h 3 * 4 * This file is intended to hold the various register definitions for CBE 5 * on-chip system devices (memory controller, IO controller, etc...) 6 * 7 * (C) Copyright IBM Corporation 2001,2006 8 * 9 * Authors: Maximino Aguilar (maguilar@us.ibm.com) 10 * David J. Erb (djerb@us.ibm.com) 11 * 12 * (c) 2006 Benjamin Herrenschmidt <benh@kernel.crashing.org>, IBM Corp. 13 */ 14 15 #ifndef CBE_REGS_H 16 #define CBE_REGS_H 17 18 #include <asm/cell-pmu.h> 19 20 /* 21 * 22 * Some HID register definitions 23 * 24 */ 25 26 /* CBE specific HID0 bits */ 27 #define HID0_CBE_THERM_WAKEUP 0x0000020000000000ul 28 #define HID0_CBE_SYSERR_WAKEUP 0x0000008000000000ul 29 #define HID0_CBE_THERM_INT_EN 0x0000000400000000ul 30 #define HID0_CBE_SYSERR_INT_EN 0x0000000200000000ul 31 32 #define MAX_CBE 2 33 34 /* 35 * 36 * Pervasive unit register definitions 37 * 38 */ 39 40 union spe_reg { 41 u64 val; 42 u8 spe[8]; 43 }; 44 45 union ppe_spe_reg { 46 u64 val; 47 struct { 48 u32 ppe; 49 u32 spe; 50 }; 51 }; 52 53 54 struct cbe_pmd_regs { 55 /* Debug Bus Control */ 56 u64 pad_0x0000; /* 0x0000 */ 57 58 u64 group_control; /* 0x0008 */ 59 60 u8 pad_0x0010_0x00a8 [0x00a8 - 0x0010]; /* 0x0010 */ 61 62 u64 debug_bus_control; /* 0x00a8 */ 63 64 u8 pad_0x00b0_0x0100 [0x0100 - 0x00b0]; /* 0x00b0 */ 65 66 u64 trace_aux_data; /* 0x0100 */ 67 u64 trace_buffer_0_63; /* 0x0108 */ 68 u64 trace_buffer_64_127; /* 0x0110 */ 69 u64 trace_address; /* 0x0118 */ 70 u64 ext_tr_timer; /* 0x0120 */ 71 72 u8 pad_0x0128_0x0400 [0x0400 - 0x0128]; /* 0x0128 */ 73 74 /* Performance Monitor */ 75 u64 pm_status; /* 0x0400 */ 76 u64 pm_control; /* 0x0408 */ 77 u64 pm_interval; /* 0x0410 */ 78 u64 pm_ctr[4]; /* 0x0418 */ 79 u64 pm_start_stop; /* 0x0438 */ 80 u64 pm07_control[8]; /* 0x0440 */ 81 82 u8 pad_0x0480_0x0800 [0x0800 - 0x0480]; /* 0x0480 */ 83 84 /* Thermal Sensor Registers */ 85 union spe_reg ts_ctsr1; /* 0x0800 */ 86 u64 ts_ctsr2; /* 0x0808 */ 87 union spe_reg ts_mtsr1; /* 0x0810 */ 88 u64 ts_mtsr2; /* 0x0818 */ 89 union spe_reg ts_itr1; /* 0x0820 */ 90 u64 ts_itr2; /* 0x0828 */ 91 u64 ts_gitr; /* 0x0830 */ 92 u64 ts_isr; /* 0x0838 */ 93 u64 ts_imr; /* 0x0840 */ 94 union spe_reg tm_cr1; /* 0x0848 */ 95 u64 tm_cr2; /* 0x0850 */ 96 u64 tm_simr; /* 0x0858 */ 97 union ppe_spe_reg tm_tpr; /* 0x0860 */ 98 union spe_reg tm_str1; /* 0x0868 */ 99 u64 tm_str2; /* 0x0870 */ 100 union ppe_spe_reg tm_tsr; /* 0x0878 */ 101 102 /* Power Management */ 103 u64 pmcr; /* 0x0880 */ 104 #define CBE_PMD_PAUSE_ZERO_CONTROL 0x10000 105 u64 pmsr; /* 0x0888 */ 106 107 /* Time Base Register */ 108 u64 tbr; /* 0x0890 */ 109 110 u8 pad_0x0898_0x0c00 [0x0c00 - 0x0898]; /* 0x0898 */ 111 112 /* Fault Isolation Registers */ 113 u64 checkstop_fir; /* 0x0c00 */ 114 u64 recoverable_fir; /* 0x0c08 */ 115 u64 spec_att_mchk_fir; /* 0x0c10 */ 116 u32 fir_mode_reg; /* 0x0c18 */ 117 u8 pad_0x0c1c_0x0c20 [4]; /* 0x0c1c */ 118 #define CBE_PMD_FIR_MODE_M8 0x00800 119 u64 fir_enable_mask; /* 0x0c20 */ 120 121 u8 pad_0x0c28_0x0ca8 [0x0ca8 - 0x0c28]; /* 0x0c28 */ 122 u64 ras_esc_0; /* 0x0ca8 */ 123 u8 pad_0x0cb0_0x1000 [0x1000 - 0x0cb0]; /* 0x0cb0 */ 124 }; 125 126 extern struct cbe_pmd_regs __iomem *cbe_get_pmd_regs(struct device_node *np); 127 extern struct cbe_pmd_regs __iomem *cbe_get_cpu_pmd_regs(int cpu); 128 129 /* 130 * PMU shadow registers 131 * 132 * Many of the registers in the performance monitoring unit are write-only, 133 * so we need to save a copy of what we write to those registers. 134 * 135 * The actual data counters are read/write. However, writing to the counters 136 * only takes effect if the PMU is enabled. Otherwise the value is stored in 137 * a hardware latch until the next time the PMU is enabled. So we save a copy 138 * of the counter values if we need to read them back while the PMU is 139 * disabled. The counter_value_in_latch field is a bitmap indicating which 140 * counters currently have a value waiting to be written. 141 */ 142 143 struct cbe_pmd_shadow_regs { 144 u32 group_control; 145 u32 debug_bus_control; 146 u32 trace_address; 147 u32 ext_tr_timer; 148 u32 pm_status; 149 u32 pm_control; 150 u32 pm_interval; 151 u32 pm_start_stop; 152 u32 pm07_control[NR_CTRS]; 153 154 u32 pm_ctr[NR_PHYS_CTRS]; 155 u32 counter_value_in_latch; 156 }; 157 158 extern struct cbe_pmd_shadow_regs *cbe_get_pmd_shadow_regs(struct device_node *np); 159 extern struct cbe_pmd_shadow_regs *cbe_get_cpu_pmd_shadow_regs(int cpu); 160 161 /* 162 * 163 * IIC unit register definitions 164 * 165 */ 166 167 struct cbe_iic_pending_bits { 168 u32 data; 169 u8 flags; 170 u8 class; 171 u8 source; 172 u8 prio; 173 }; 174 175 #define CBE_IIC_IRQ_VALID 0x80 176 #define CBE_IIC_IRQ_IPI 0x40 177 178 struct cbe_iic_thread_regs { 179 struct cbe_iic_pending_bits pending; 180 struct cbe_iic_pending_bits pending_destr; 181 u64 generate; 182 u64 prio; 183 }; 184 185 struct cbe_iic_regs { 186 u8 pad_0x0000_0x0400[0x0400 - 0x0000]; /* 0x0000 */ 187 188 /* IIC interrupt registers */ 189 struct cbe_iic_thread_regs thread[2]; /* 0x0400 */ 190 191 u64 iic_ir; /* 0x0440 */ 192 #define CBE_IIC_IR_PRIO(x) (((x) & 0xf) << 12) 193 #define CBE_IIC_IR_DEST_NODE(x) (((x) & 0xf) << 4) 194 #define CBE_IIC_IR_DEST_UNIT(x) ((x) & 0xf) 195 #define CBE_IIC_IR_IOC_0 0x0 196 #define CBE_IIC_IR_IOC_1S 0xb 197 #define CBE_IIC_IR_PT_0 0xe 198 #define CBE_IIC_IR_PT_1 0xf 199 200 u64 iic_is; /* 0x0448 */ 201 #define CBE_IIC_IS_PMI 0x2 202 203 u8 pad_0x0450_0x0500[0x0500 - 0x0450]; /* 0x0450 */ 204 205 /* IOC FIR */ 206 u64 ioc_fir_reset; /* 0x0500 */ 207 u64 ioc_fir_set; /* 0x0508 */ 208 u64 ioc_checkstop_enable; /* 0x0510 */ 209 u64 ioc_fir_error_mask; /* 0x0518 */ 210 u64 ioc_syserr_enable; /* 0x0520 */ 211 u64 ioc_fir; /* 0x0528 */ 212 213 u8 pad_0x0530_0x1000[0x1000 - 0x0530]; /* 0x0530 */ 214 }; 215 216 extern struct cbe_iic_regs __iomem *cbe_get_iic_regs(struct device_node *np); 217 extern struct cbe_iic_regs __iomem *cbe_get_cpu_iic_regs(int cpu); 218 219 220 struct cbe_mic_tm_regs { 221 u8 pad_0x0000_0x0040[0x0040 - 0x0000]; /* 0x0000 */ 222 223 u64 mic_ctl_cnfg2; /* 0x0040 */ 224 #define CBE_MIC_ENABLE_AUX_TRC 0x8000000000000000LL 225 #define CBE_MIC_DISABLE_PWR_SAV_2 0x0200000000000000LL 226 #define CBE_MIC_DISABLE_AUX_TRC_WRAP 0x0100000000000000LL 227 #define CBE_MIC_ENABLE_AUX_TRC_INT 0x0080000000000000LL 228 229 u64 pad_0x0048; /* 0x0048 */ 230 231 u64 mic_aux_trc_base; /* 0x0050 */ 232 u64 mic_aux_trc_max_addr; /* 0x0058 */ 233 u64 mic_aux_trc_cur_addr; /* 0x0060 */ 234 u64 mic_aux_trc_grf_addr; /* 0x0068 */ 235 u64 mic_aux_trc_grf_data; /* 0x0070 */ 236 237 u64 pad_0x0078; /* 0x0078 */ 238 239 u64 mic_ctl_cnfg_0; /* 0x0080 */ 240 #define CBE_MIC_DISABLE_PWR_SAV_0 0x8000000000000000LL 241 242 u64 pad_0x0088; /* 0x0088 */ 243 244 u64 slow_fast_timer_0; /* 0x0090 */ 245 u64 slow_next_timer_0; /* 0x0098 */ 246 247 u8 pad_0x00a0_0x00f8[0x00f8 - 0x00a0]; /* 0x00a0 */ 248 u64 mic_df_ecc_address_0; /* 0x00f8 */ 249 250 u8 pad_0x0100_0x01b8[0x01b8 - 0x0100]; /* 0x0100 */ 251 u64 mic_df_ecc_address_1; /* 0x01b8 */ 252 253 u64 mic_ctl_cnfg_1; /* 0x01c0 */ 254 #define CBE_MIC_DISABLE_PWR_SAV_1 0x8000000000000000LL 255 256 u64 pad_0x01c8; /* 0x01c8 */ 257 258 u64 slow_fast_timer_1; /* 0x01d0 */ 259 u64 slow_next_timer_1; /* 0x01d8 */ 260 261 u8 pad_0x01e0_0x0208[0x0208 - 0x01e0]; /* 0x01e0 */ 262 u64 mic_exc; /* 0x0208 */ 263 #define CBE_MIC_EXC_BLOCK_SCRUB 0x0800000000000000ULL 264 #define CBE_MIC_EXC_FAST_SCRUB 0x0100000000000000ULL 265 266 u64 mic_mnt_cfg; /* 0x0210 */ 267 #define CBE_MIC_MNT_CFG_CHAN_0_POP 0x0002000000000000ULL 268 #define CBE_MIC_MNT_CFG_CHAN_1_POP 0x0004000000000000ULL 269 270 u64 mic_df_config; /* 0x0218 */ 271 #define CBE_MIC_ECC_DISABLE_0 0x4000000000000000ULL 272 #define CBE_MIC_ECC_REP_SINGLE_0 0x2000000000000000ULL 273 #define CBE_MIC_ECC_DISABLE_1 0x0080000000000000ULL 274 #define CBE_MIC_ECC_REP_SINGLE_1 0x0040000000000000ULL 275 276 u8 pad_0x0220_0x0230[0x0230 - 0x0220]; /* 0x0220 */ 277 u64 mic_fir; /* 0x0230 */ 278 #define CBE_MIC_FIR_ECC_SINGLE_0_ERR 0x0200000000000000ULL 279 #define CBE_MIC_FIR_ECC_MULTI_0_ERR 0x0100000000000000ULL 280 #define CBE_MIC_FIR_ECC_SINGLE_1_ERR 0x0080000000000000ULL 281 #define CBE_MIC_FIR_ECC_MULTI_1_ERR 0x0040000000000000ULL 282 #define CBE_MIC_FIR_ECC_ERR_MASK 0xffff000000000000ULL 283 #define CBE_MIC_FIR_ECC_SINGLE_0_CTE 0x0000020000000000ULL 284 #define CBE_MIC_FIR_ECC_MULTI_0_CTE 0x0000010000000000ULL 285 #define CBE_MIC_FIR_ECC_SINGLE_1_CTE 0x0000008000000000ULL 286 #define CBE_MIC_FIR_ECC_MULTI_1_CTE 0x0000004000000000ULL 287 #define CBE_MIC_FIR_ECC_CTE_MASK 0x0000ffff00000000ULL 288 #define CBE_MIC_FIR_ECC_SINGLE_0_RESET 0x0000000002000000ULL 289 #define CBE_MIC_FIR_ECC_MULTI_0_RESET 0x0000000001000000ULL 290 #define CBE_MIC_FIR_ECC_SINGLE_1_RESET 0x0000000000800000ULL 291 #define CBE_MIC_FIR_ECC_MULTI_1_RESET 0x0000000000400000ULL 292 #define CBE_MIC_FIR_ECC_RESET_MASK 0x00000000ffff0000ULL 293 #define CBE_MIC_FIR_ECC_SINGLE_0_SET 0x0000000000000200ULL 294 #define CBE_MIC_FIR_ECC_MULTI_0_SET 0x0000000000000100ULL 295 #define CBE_MIC_FIR_ECC_SINGLE_1_SET 0x0000000000000080ULL 296 #define CBE_MIC_FIR_ECC_MULTI_1_SET 0x0000000000000040ULL 297 #define CBE_MIC_FIR_ECC_SET_MASK 0x000000000000ffffULL 298 u64 mic_fir_debug; /* 0x0238 */ 299 300 u8 pad_0x0240_0x1000[0x1000 - 0x0240]; /* 0x0240 */ 301 }; 302 303 extern struct cbe_mic_tm_regs __iomem *cbe_get_mic_tm_regs(struct device_node *np); 304 extern struct cbe_mic_tm_regs __iomem *cbe_get_cpu_mic_tm_regs(int cpu); 305 306 /* some utility functions to deal with SMT */ 307 extern u32 cbe_get_hw_thread_id(int cpu); 308 extern u32 cbe_cpu_to_node(int cpu); 309 extern u32 cbe_node_to_cpu(int node); 310 311 /* Init this module early */ 312 extern void cbe_regs_init(void); 313 314 315 #endif /* CBE_REGS_H */ 316