• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1 /*
2  * INET		An implementation of the TCP/IP protocol suite for the LINUX
3  *		operating system.  INET is implemented using the  BSD Socket
4  *		interface as the means of communication with the user level.
5  *
6  *		Global definitions for the INET interface module.
7  *
8  * Version:	@(#)if.h	1.0.2	04/18/93
9  *
10  * Authors:	Original taken from Berkeley UNIX 4.3, (c) UCB 1982-1988
11  *		Ross Biro
12  *		Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
13  *
14  *		This program is free software; you can redistribute it and/or
15  *		modify it under the terms of the GNU General Public License
16  *		as published by the Free Software Foundation; either version
17  *		2 of the License, or (at your option) any later version.
18  */
19 #ifndef _LINUX_IF_H
20 #define _LINUX_IF_H
21 
22 #include <linux/types.h>		/* for "__kernel_caddr_t" et al	*/
23 #include <linux/socket.h>		/* for "struct sockaddr" et al	*/
24 #include <linux/compiler.h>		/* for "__user" et al           */
25 
26 #define	IFNAMSIZ	16
27 #define	IFALIASZ	256
28 #include <linux/hdlc/ioctl.h>
29 
30 /* Standard interface flags (netdevice->flags). */
31 #define	IFF_UP		0x1		/* interface is up		*/
32 #define	IFF_BROADCAST	0x2		/* broadcast address valid	*/
33 #define	IFF_DEBUG	0x4		/* turn on debugging		*/
34 #define	IFF_LOOPBACK	0x8		/* is a loopback net		*/
35 #define	IFF_POINTOPOINT	0x10		/* interface is has p-p link	*/
36 #define	IFF_NOTRAILERS	0x20		/* avoid use of trailers	*/
37 #define	IFF_RUNNING	0x40		/* interface RFC2863 OPER_UP	*/
38 #define	IFF_NOARP	0x80		/* no ARP protocol		*/
39 #define	IFF_PROMISC	0x100		/* receive all packets		*/
40 #define	IFF_ALLMULTI	0x200		/* receive all multicast packets*/
41 
42 #define IFF_MASTER	0x400		/* master of a load balancer 	*/
43 #define IFF_SLAVE	0x800		/* slave of a load balancer	*/
44 
45 #define IFF_MULTICAST	0x1000		/* Supports multicast		*/
46 
47 #define IFF_PORTSEL	0x2000          /* can set media type		*/
48 #define IFF_AUTOMEDIA	0x4000		/* auto media select active	*/
49 #define IFF_DYNAMIC	0x8000		/* dialup device with changing addresses*/
50 
51 #define IFF_LOWER_UP	0x10000		/* driver signals L1 up		*/
52 #define IFF_DORMANT	0x20000		/* driver signals dormant	*/
53 
54 #define IFF_ECHO	0x40000		/* echo sent packets		*/
55 
56 #define IFF_VOLATILE	(IFF_LOOPBACK|IFF_POINTOPOINT|IFF_BROADCAST|IFF_ECHO|\
57 		IFF_MASTER|IFF_SLAVE|IFF_RUNNING|IFF_LOWER_UP|IFF_DORMANT)
58 
59 /* Private (from user) interface flags (netdevice->priv_flags). */
60 #define IFF_802_1Q_VLAN 0x1             /* 802.1Q VLAN device.          */
61 #define IFF_EBRIDGE	0x2		/* Ethernet bridging device.	*/
62 #define IFF_SLAVE_INACTIVE	0x4	/* bonding slave not the curr. active */
63 #define IFF_MASTER_8023AD	0x8	/* bonding master, 802.3ad. 	*/
64 #define IFF_MASTER_ALB	0x10		/* bonding master, balance-alb.	*/
65 #define IFF_BONDING	0x20		/* bonding master or slave	*/
66 #define IFF_SLAVE_NEEDARP 0x40		/* need ARPs for validation	*/
67 #define IFF_ISATAP	0x80		/* ISATAP interface (RFC4214)	*/
68 #define IFF_MASTER_ARPMON 0x100		/* bonding master, ARP mon in use */
69 
70 #define IF_GET_IFACE	0x0001		/* for querying only */
71 #define IF_GET_PROTO	0x0002
72 
73 /* For definitions see hdlc.h */
74 #define IF_IFACE_V35	0x1000		/* V.35 serial interface	*/
75 #define IF_IFACE_V24	0x1001		/* V.24 serial interface	*/
76 #define IF_IFACE_X21	0x1002		/* X.21 serial interface	*/
77 #define IF_IFACE_T1	0x1003		/* T1 telco serial interface	*/
78 #define IF_IFACE_E1	0x1004		/* E1 telco serial interface	*/
79 #define IF_IFACE_SYNC_SERIAL 0x1005	/* can't be set by software	*/
80 #define IF_IFACE_X21D   0x1006          /* X.21 Dual Clocking (FarSite) */
81 
82 /* For definitions see hdlc.h */
83 #define IF_PROTO_HDLC	0x2000		/* raw HDLC protocol		*/
84 #define IF_PROTO_PPP	0x2001		/* PPP protocol			*/
85 #define IF_PROTO_CISCO	0x2002		/* Cisco HDLC protocol		*/
86 #define IF_PROTO_FR	0x2003		/* Frame Relay protocol		*/
87 #define IF_PROTO_FR_ADD_PVC 0x2004	/*    Create FR PVC		*/
88 #define IF_PROTO_FR_DEL_PVC 0x2005	/*    Delete FR PVC		*/
89 #define IF_PROTO_X25	0x2006		/* X.25				*/
90 #define IF_PROTO_HDLC_ETH 0x2007	/* raw HDLC, Ethernet emulation	*/
91 #define IF_PROTO_FR_ADD_ETH_PVC 0x2008	/*  Create FR Ethernet-bridged PVC */
92 #define IF_PROTO_FR_DEL_ETH_PVC 0x2009	/*  Delete FR Ethernet-bridged PVC */
93 #define IF_PROTO_FR_PVC	0x200A		/* for reading PVC status	*/
94 #define IF_PROTO_FR_ETH_PVC 0x200B
95 #define IF_PROTO_RAW    0x200C          /* RAW Socket                   */
96 
97 /* RFC 2863 operational status */
98 enum {
99 	IF_OPER_UNKNOWN,
100 	IF_OPER_NOTPRESENT,
101 	IF_OPER_DOWN,
102 	IF_OPER_LOWERLAYERDOWN,
103 	IF_OPER_TESTING,
104 	IF_OPER_DORMANT,
105 	IF_OPER_UP,
106 };
107 
108 /* link modes */
109 enum {
110 	IF_LINK_MODE_DEFAULT,
111 	IF_LINK_MODE_DORMANT,	/* limit upward transition to dormant */
112 };
113 
114 /*
115  *	Device mapping structure. I'd just gone off and designed a
116  *	beautiful scheme using only loadable modules with arguments
117  *	for driver options and along come the PCMCIA people 8)
118  *
119  *	Ah well. The get() side of this is good for WDSETUP, and it'll
120  *	be handy for debugging things. The set side is fine for now and
121  *	being very small might be worth keeping for clean configuration.
122  */
123 
124 struct ifmap
125 {
126 	unsigned long mem_start;
127 	unsigned long mem_end;
128 	unsigned short base_addr;
129 	unsigned char irq;
130 	unsigned char dma;
131 	unsigned char port;
132 	/* 3 bytes spare */
133 };
134 
135 struct if_settings
136 {
137 	unsigned int type;	/* Type of physical device or protocol */
138 	unsigned int size;	/* Size of the data allocated by the caller */
139 	union {
140 		/* {atm/eth/dsl}_settings anyone ? */
141 		raw_hdlc_proto		__user *raw_hdlc;
142 		cisco_proto		__user *cisco;
143 		fr_proto		__user *fr;
144 		fr_proto_pvc		__user *fr_pvc;
145 		fr_proto_pvc_info	__user *fr_pvc_info;
146 
147 		/* interface settings */
148 		sync_serial_settings	__user *sync;
149 		te1_settings		__user *te1;
150 	} ifs_ifsu;
151 };
152 
153 /*
154  * Interface request structure used for socket
155  * ioctl's.  All interface ioctl's must have parameter
156  * definitions which begin with ifr_name.  The
157  * remainder may be interface specific.
158  */
159 
160 struct ifreq
161 {
162 #define IFHWADDRLEN	6
163 	union
164 	{
165 		char	ifrn_name[IFNAMSIZ];		/* if name, e.g. "en0" */
166 	} ifr_ifrn;
167 
168 	union {
169 		struct	sockaddr ifru_addr;
170 		struct	sockaddr ifru_dstaddr;
171 		struct	sockaddr ifru_broadaddr;
172 		struct	sockaddr ifru_netmask;
173 		struct  sockaddr ifru_hwaddr;
174 		short	ifru_flags;
175 		int	ifru_ivalue;
176 		int	ifru_mtu;
177 		struct  ifmap ifru_map;
178 		char	ifru_slave[IFNAMSIZ];	/* Just fits the size */
179 		char	ifru_newname[IFNAMSIZ];
180 		void __user *	ifru_data;
181 		struct	if_settings ifru_settings;
182 	} ifr_ifru;
183 };
184 
185 #define ifr_name	ifr_ifrn.ifrn_name	/* interface name 	*/
186 #define ifr_hwaddr	ifr_ifru.ifru_hwaddr	/* MAC address 		*/
187 #define	ifr_addr	ifr_ifru.ifru_addr	/* address		*/
188 #define	ifr_dstaddr	ifr_ifru.ifru_dstaddr	/* other end of p-p lnk	*/
189 #define	ifr_broadaddr	ifr_ifru.ifru_broadaddr	/* broadcast address	*/
190 #define	ifr_netmask	ifr_ifru.ifru_netmask	/* interface net mask	*/
191 #define	ifr_flags	ifr_ifru.ifru_flags	/* flags		*/
192 #define	ifr_metric	ifr_ifru.ifru_ivalue	/* metric		*/
193 #define	ifr_mtu		ifr_ifru.ifru_mtu	/* mtu			*/
194 #define ifr_map		ifr_ifru.ifru_map	/* device map		*/
195 #define ifr_slave	ifr_ifru.ifru_slave	/* slave device		*/
196 #define	ifr_data	ifr_ifru.ifru_data	/* for use by interface	*/
197 #define ifr_ifindex	ifr_ifru.ifru_ivalue	/* interface index	*/
198 #define ifr_bandwidth	ifr_ifru.ifru_ivalue    /* link bandwidth	*/
199 #define ifr_qlen	ifr_ifru.ifru_ivalue	/* Queue length 	*/
200 #define ifr_newname	ifr_ifru.ifru_newname	/* New name		*/
201 #define ifr_settings	ifr_ifru.ifru_settings	/* Device/proto settings*/
202 
203 /*
204  * Structure used in SIOCGIFCONF request.
205  * Used to retrieve interface configuration
206  * for machine (useful for programs which
207  * must know all networks accessible).
208  */
209 
210 struct ifconf
211 {
212 	int	ifc_len;			/* size of buffer	*/
213 	union
214 	{
215 		char __user *ifcu_buf;
216 		struct ifreq __user *ifcu_req;
217 	} ifc_ifcu;
218 };
219 #define	ifc_buf	ifc_ifcu.ifcu_buf		/* buffer address	*/
220 #define	ifc_req	ifc_ifcu.ifcu_req		/* array of structures	*/
221 
222 #endif /* _LINUX_IF_H */
223