Lines Matching refs:and
7 The VSC, GSC and HSC busses were used from the earliest 700-series
8 workstations up to and including the C360/J2240 workstations. They
10 are not found in B1000, C3000, J5000, A500, L1000, N4000 and upwards.
17 The HP-PB bus was used in the Nova class and K-class servers.
26 U2/Uturn chip in "Virtual Mode" and use the I/O MMU.
36 and floppy. Note that you must still enable all the individual
44 older systems, including B/C/D/R class and 715/64, 715/80 and
46 used), a HIL interface chip and is also known to be used as the
55 incomplete and lacks support for card-to-host DMA.
69 All recent HP machines have PCI slots, and you should say Y here
72 Beware that some GSC cards have a Dino onboard and PCI inside them,
82 machines from the B132 to the C360, the J2240 and the A180. Some
84 the card, and you also need to say Y here if you have such a card.
93 present on B, C, J, L and N-class machines with 4-digit model
94 numbers and the A400/A500.
124 Say Y here to support the SuperIO chip found in Bxxxx, C3xxx and
125 J5xxx+ machines. This enables IDE, Floppy, Parallel Port, and
129 bool "Chassis LCD and LED support"
137 This has nothing to do with LED State support for A and E class.
147 class, and support for the GSP Virtual Front Panel (LED State and
148 message logging) as found on high end servers such as A, L and
151 such as "INI", "RUN" and "FLT", and might thus clobber messages
153 This driver updates the state panel (LED and/or LCD) upon system