Lines Matching refs:or
25 Linux can run in the host, or in the peripheral. In both cases
28 or are integrated with the CPU in a microcontroller. The more
30 or "UHCI", and are usually integrated into southbridges on PC
57 either create new failure modes or remove the one you're
68 files may help when you're troubleshooting or bringing up a
70 here. If in doubt, or to conserve kernel memory, say "N".
79 troubleshooting or bringing up a driver on a new board.
80 Enable these files by choosing "Y" here. If in doubt, or
89 configured, perhaps to operate circuitry or to recharge
91 such as an AC adapter or batteries.
140 Say "y" to link the driver statically, or "m" to build a
152 Say "y" to link the driver statically, or "m" to build a
171 Say "y" to link the driver statically, or "m" to build a
185 Say "y" to link the driver statically, or "m" to build a
207 Say "y" to link the driver statically, or "m" to build a
212 tristate "PXA 25x or IXP 4xx"
222 Say "y" to link the driver statically, or "m" to build a
243 Say "y" to link the driver statically, or "m" to build a
253 It has nine or more configurable endpoints, and endpoint zero.
255 Say "y" to link the driver statically, or "m" to build a
268 Say "y" to link the driver statically, or "m" to build a
290 Say "y" to link the driver statically, or "m" to build a
324 USB2.0 OTG controller, which can be configured as high speed or
352 Say "y" to link the driver statically, or "m" to build a
366 it provides 4 IN and 4 OUT endpoints (bulk or interrupt type).
368 if it's not being used to implement peripheral or OTG roles.
370 Say "y" to link the driver statically, or "m" to build a
382 controllers having QE or CPM2, given minor tweaks.
395 Say "y" to link the driver statically, or "m" to build a
420 Say "y" to link the driver statically, or "m" to build a
431 The device controller has three configurable (bulk or interrupt)
434 Say "y" to link the driver statically, or "m" to build a
451 This driver dose not support interrupt transfer or isochronous
471 can be high, full, or low speed; and they have access to endpoints
472 like those from NET2280, PXA2xx, or SA1100 hardware.
476 driver without its hardware or drivers being involved.
482 Say "y" to link the driver statically, or "m" to build a
524 A gadget driver implements one or more USB functions using
527 Gadget drivers are hardware-neutral, or "platform independent",
528 except that they sometimes must understand quirks or limitations
530 a controller doesn't support alternate configurations or provide
532 not be able work with that controller, or might need to implement
543 sources bulk data; or it loops back a configurable number of
560 Say "y" to link the driver statically, or "m" to build a
591 Say "y" to link the driver statically, or "m" to build a
635 Say "y" to link the driver statically, or "m" to build a
685 Say "y" to link the driver statically, or "m" to build a
697 Say "y" to link the driver statically, or "m" to build a
709 implemented in kernel space (for instance Ethernet, serial or
712 If you say "y" or "m" here you will be able what kind of
715 Say "y" to link the driver statically, or "m" to build
744 As its storage repository it can use a regular file or a block
746 specified as a module parameter or sysfs option.
751 Say "y" to link the driver statically, or "m" to build
760 BBB or BOT (Bulk Only Transport) and UAS (USB Attached SCSI). BOT is
776 to interoperate with MS-Windows hosts or with the Linux-USB
783 Say "y" to link the driver statically, or "m" to build a
802 Say "y" to link the driver statically, or "m" to build a
812 receive or send printer data. It can use ioctl calls to
813 the device file to get or set printer status.
815 Say "y" to link the driver statically, or "m" to build a
858 Say "y" to link the driver statically, or "m" to build a
872 a kernel for N900, say Y or M here. If unsure, say N.
884 Say "y" to link the driver statically, or "m" to build a
896 and/or CDC Ethernet), mass storage and ACM serial link
906 Say "y" to link the driver statically, or "m" to build a
944 Say "y" to link the driver statically, or "m" to build a
956 Say "y" to link the driver statically, or "m" to build a
980 # or video class gadget drivers), or specific hardware, here.
991 Say "y" to link the driver statically, or "m" to build a