1 /* 2 * FILE SA-1100.h 3 * 4 * Version 1.2 5 * Author Copyright (c) Marc A. Viredaz, 1998 6 * DEC Western Research Laboratory, Palo Alto, CA 7 * Date January 1998 (April 1997) 8 * System StrongARM SA-1100 9 * Language C or ARM Assembly 10 * Purpose Definition of constants related to the StrongARM 11 * SA-1100 microprocessor (Advanced RISC Machine (ARM) 12 * architecture version 4). This file is based on the 13 * StrongARM SA-1100 data sheet version 2.2. 14 * 15 */ 16 17 18 /* Be sure that virtual mapping is defined right */ 19 #ifndef __ASM_ARCH_HARDWARE_H 20 #error You must include hardware.h not SA-1100.h 21 #endif 22 23 #include "bitfield.h" 24 25 /* 26 * SA1100 CS line to physical address 27 */ 28 29 #define SA1100_CS0_PHYS 0x00000000 30 #define SA1100_CS1_PHYS 0x08000000 31 #define SA1100_CS2_PHYS 0x10000000 32 #define SA1100_CS3_PHYS 0x18000000 33 #define SA1100_CS4_PHYS 0x40000000 34 #define SA1100_CS5_PHYS 0x48000000 35 36 /* 37 * Personal Computer Memory Card International Association (PCMCIA) sockets 38 */ 39 40 #define PCMCIAPrtSp 0x04000000 /* PCMCIA Partition Space [byte] */ 41 #define PCMCIASp (4*PCMCIAPrtSp) /* PCMCIA Space [byte] */ 42 #define PCMCIAIOSp PCMCIAPrtSp /* PCMCIA I/O Space [byte] */ 43 #define PCMCIAAttrSp PCMCIAPrtSp /* PCMCIA Attribute Space [byte] */ 44 #define PCMCIAMemSp PCMCIAPrtSp /* PCMCIA Memory Space [byte] */ 45 46 #define PCMCIA0Sp PCMCIASp /* PCMCIA 0 Space [byte] */ 47 #define PCMCIA0IOSp PCMCIAIOSp /* PCMCIA 0 I/O Space [byte] */ 48 #define PCMCIA0AttrSp PCMCIAAttrSp /* PCMCIA 0 Attribute Space [byte] */ 49 #define PCMCIA0MemSp PCMCIAMemSp /* PCMCIA 0 Memory Space [byte] */ 50 51 #define PCMCIA1Sp PCMCIASp /* PCMCIA 1 Space [byte] */ 52 #define PCMCIA1IOSp PCMCIAIOSp /* PCMCIA 1 I/O Space [byte] */ 53 #define PCMCIA1AttrSp PCMCIAAttrSp /* PCMCIA 1 Attribute Space [byte] */ 54 #define PCMCIA1MemSp PCMCIAMemSp /* PCMCIA 1 Memory Space [byte] */ 55 56 #define _PCMCIA(Nb) /* PCMCIA [0..1] */ \ 57 (0x20000000 + (Nb)*PCMCIASp) 58 #define _PCMCIAIO(Nb) _PCMCIA (Nb) /* PCMCIA I/O [0..1] */ 59 #define _PCMCIAAttr(Nb) /* PCMCIA Attribute [0..1] */ \ 60 (_PCMCIA (Nb) + 2*PCMCIAPrtSp) 61 #define _PCMCIAMem(Nb) /* PCMCIA Memory [0..1] */ \ 62 (_PCMCIA (Nb) + 3*PCMCIAPrtSp) 63 64 #define _PCMCIA0 _PCMCIA (0) /* PCMCIA 0 */ 65 #define _PCMCIA0IO _PCMCIAIO (0) /* PCMCIA 0 I/O */ 66 #define _PCMCIA0Attr _PCMCIAAttr (0) /* PCMCIA 0 Attribute */ 67 #define _PCMCIA0Mem _PCMCIAMem (0) /* PCMCIA 0 Memory */ 68 69 #define _PCMCIA1 _PCMCIA (1) /* PCMCIA 1 */ 70 #define _PCMCIA1IO _PCMCIAIO (1) /* PCMCIA 1 I/O */ 71 #define _PCMCIA1Attr _PCMCIAAttr (1) /* PCMCIA 1 Attribute */ 72 #define _PCMCIA1Mem _PCMCIAMem (1) /* PCMCIA 1 Memory */ 73 74 75 /* 76 * Universal Serial Bus (USB) Device Controller (UDC) control registers 77 * 78 * Registers 79 * Ser0UDCCR Serial port 0 Universal Serial Bus (USB) Device 80 * Controller (UDC) Control Register (read/write). 81 * Ser0UDCAR Serial port 0 Universal Serial Bus (USB) Device 82 * Controller (UDC) Address Register (read/write). 83 * Ser0UDCOMP Serial port 0 Universal Serial Bus (USB) Device 84 * Controller (UDC) Output Maximum Packet size register 85 * (read/write). 86 * Ser0UDCIMP Serial port 0 Universal Serial Bus (USB) Device 87 * Controller (UDC) Input Maximum Packet size register 88 * (read/write). 89 * Ser0UDCCS0 Serial port 0 Universal Serial Bus (USB) Device 90 * Controller (UDC) Control/Status register end-point 0 91 * (read/write). 92 * Ser0UDCCS1 Serial port 0 Universal Serial Bus (USB) Device 93 * Controller (UDC) Control/Status register end-point 1 94 * (output, read/write). 95 * Ser0UDCCS2 Serial port 0 Universal Serial Bus (USB) Device 96 * Controller (UDC) Control/Status register end-point 2 97 * (input, read/write). 98 * Ser0UDCD0 Serial port 0 Universal Serial Bus (USB) Device 99 * Controller (UDC) Data register end-point 0 100 * (read/write). 101 * Ser0UDCWC Serial port 0 Universal Serial Bus (USB) Device 102 * Controller (UDC) Write Count register end-point 0 103 * (read). 104 * Ser0UDCDR Serial port 0 Universal Serial Bus (USB) Device 105 * Controller (UDC) Data Register (read/write). 106 * Ser0UDCSR Serial port 0 Universal Serial Bus (USB) Device 107 * Controller (UDC) Status Register (read/write). 108 */ 109 110 #define Ser0UDCCR __REG(0x80000000) /* Ser. port 0 UDC Control Reg. */ 111 #define Ser0UDCAR __REG(0x80000004) /* Ser. port 0 UDC Address Reg. */ 112 #define Ser0UDCOMP __REG(0x80000008) /* Ser. port 0 UDC Output Maximum Packet size reg. */ 113 #define Ser0UDCIMP __REG(0x8000000C) /* Ser. port 0 UDC Input Maximum Packet size reg. */ 114 #define Ser0UDCCS0 __REG(0x80000010) /* Ser. port 0 UDC Control/Status reg. end-point 0 */ 115 #define Ser0UDCCS1 __REG(0x80000014) /* Ser. port 0 UDC Control/Status reg. end-point 1 (output) */ 116 #define Ser0UDCCS2 __REG(0x80000018) /* Ser. port 0 UDC Control/Status reg. end-point 2 (input) */ 117 #define Ser0UDCD0 __REG(0x8000001C) /* Ser. port 0 UDC Data reg. end-point 0 */ 118 #define Ser0UDCWC __REG(0x80000020) /* Ser. port 0 UDC Write Count reg. end-point 0 */ 119 #define Ser0UDCDR __REG(0x80000028) /* Ser. port 0 UDC Data Reg. */ 120 #define Ser0UDCSR __REG(0x80000030) /* Ser. port 0 UDC Status Reg. */ 121 122 #define UDCCR_UDD 0x00000001 /* UDC Disable */ 123 #define UDCCR_UDA 0x00000002 /* UDC Active (read) */ 124 #define UDCCR_RESIM 0x00000004 /* Resume Interrupt Mask, per errata */ 125 #define UDCCR_EIM 0x00000008 /* End-point 0 Interrupt Mask */ 126 /* (disable) */ 127 #define UDCCR_RIM 0x00000010 /* Receive Interrupt Mask */ 128 /* (disable) */ 129 #define UDCCR_TIM 0x00000020 /* Transmit Interrupt Mask */ 130 /* (disable) */ 131 #define UDCCR_SRM 0x00000040 /* Suspend/Resume interrupt Mask */ 132 /* (disable) */ 133 #define UDCCR_SUSIM UDCCR_SRM /* Per errata, SRM just masks suspend */ 134 #define UDCCR_REM 0x00000080 /* REset interrupt Mask (disable) */ 135 136 #define UDCAR_ADD Fld (7, 0) /* function ADDress */ 137 138 #define UDCOMP_OUTMAXP Fld (8, 0) /* OUTput MAXimum Packet size - 1 */ 139 /* [byte] */ 140 #define UDCOMP_OutMaxPkt(Size) /* Output Maximum Packet size */ \ 141 /* [1..256 byte] */ \ 142 (((Size) - 1) << FShft (UDCOMP_OUTMAXP)) 143 144 #define UDCIMP_INMAXP Fld (8, 0) /* INput MAXimum Packet size - 1 */ 145 /* [byte] */ 146 #define UDCIMP_InMaxPkt(Size) /* Input Maximum Packet size */ \ 147 /* [1..256 byte] */ \ 148 (((Size) - 1) << FShft (UDCIMP_INMAXP)) 149 150 #define UDCCS0_OPR 0x00000001 /* Output Packet Ready (read) */ 151 #define UDCCS0_IPR 0x00000002 /* Input Packet Ready */ 152 #define UDCCS0_SST 0x00000004 /* Sent STall */ 153 #define UDCCS0_FST 0x00000008 /* Force STall */ 154 #define UDCCS0_DE 0x00000010 /* Data End */ 155 #define UDCCS0_SE 0x00000020 /* Setup End (read) */ 156 #define UDCCS0_SO 0x00000040 /* Serviced Output packet ready */ 157 /* (write) */ 158 #define UDCCS0_SSE 0x00000080 /* Serviced Setup End (write) */ 159 160 #define UDCCS1_RFS 0x00000001 /* Receive FIFO 12-bytes or more */ 161 /* Service request (read) */ 162 #define UDCCS1_RPC 0x00000002 /* Receive Packet Complete */ 163 #define UDCCS1_RPE 0x00000004 /* Receive Packet Error (read) */ 164 #define UDCCS1_SST 0x00000008 /* Sent STall */ 165 #define UDCCS1_FST 0x00000010 /* Force STall */ 166 #define UDCCS1_RNE 0x00000020 /* Receive FIFO Not Empty (read) */ 167 168 #define UDCCS2_TFS 0x00000001 /* Transmit FIFO 8-bytes or less */ 169 /* Service request (read) */ 170 #define UDCCS2_TPC 0x00000002 /* Transmit Packet Complete */ 171 #define UDCCS2_TPE 0x00000004 /* Transmit Packet Error (read) */ 172 #define UDCCS2_TUR 0x00000008 /* Transmit FIFO Under-Run */ 173 #define UDCCS2_SST 0x00000010 /* Sent STall */ 174 #define UDCCS2_FST 0x00000020 /* Force STall */ 175 176 #define UDCD0_DATA Fld (8, 0) /* receive/transmit DATA FIFOs */ 177 178 #define UDCWC_WC Fld (4, 0) /* Write Count */ 179 180 #define UDCDR_DATA Fld (8, 0) /* receive/transmit DATA FIFOs */ 181 182 #define UDCSR_EIR 0x00000001 /* End-point 0 Interrupt Request */ 183 #define UDCSR_RIR 0x00000002 /* Receive Interrupt Request */ 184 #define UDCSR_TIR 0x00000004 /* Transmit Interrupt Request */ 185 #define UDCSR_SUSIR 0x00000008 /* SUSpend Interrupt Request */ 186 #define UDCSR_RESIR 0x00000010 /* RESume Interrupt Request */ 187 #define UDCSR_RSTIR 0x00000020 /* ReSeT Interrupt Request */ 188 189 190 /* 191 * Universal Asynchronous Receiver/Transmitter (UART) control registers 192 * 193 * Registers 194 * Ser1UTCR0 Serial port 1 Universal Asynchronous 195 * Receiver/Transmitter (UART) Control Register 0 196 * (read/write). 197 * Ser1UTCR1 Serial port 1 Universal Asynchronous 198 * Receiver/Transmitter (UART) Control Register 1 199 * (read/write). 200 * Ser1UTCR2 Serial port 1 Universal Asynchronous 201 * Receiver/Transmitter (UART) Control Register 2 202 * (read/write). 203 * Ser1UTCR3 Serial port 1 Universal Asynchronous 204 * Receiver/Transmitter (UART) Control Register 3 205 * (read/write). 206 * Ser1UTDR Serial port 1 Universal Asynchronous 207 * Receiver/Transmitter (UART) Data Register 208 * (read/write). 209 * Ser1UTSR0 Serial port 1 Universal Asynchronous 210 * Receiver/Transmitter (UART) Status Register 0 211 * (read/write). 212 * Ser1UTSR1 Serial port 1 Universal Asynchronous 213 * Receiver/Transmitter (UART) Status Register 1 (read). 214 * 215 * Ser2UTCR0 Serial port 2 Universal Asynchronous 216 * Receiver/Transmitter (UART) Control Register 0 217 * (read/write). 218 * Ser2UTCR1 Serial port 2 Universal Asynchronous 219 * Receiver/Transmitter (UART) Control Register 1 220 * (read/write). 221 * Ser2UTCR2 Serial port 2 Universal Asynchronous 222 * Receiver/Transmitter (UART) Control Register 2 223 * (read/write). 224 * Ser2UTCR3 Serial port 2 Universal Asynchronous 225 * Receiver/Transmitter (UART) Control Register 3 226 * (read/write). 227 * Ser2UTCR4 Serial port 2 Universal Asynchronous 228 * Receiver/Transmitter (UART) Control Register 4 229 * (read/write). 230 * Ser2UTDR Serial port 2 Universal Asynchronous 231 * Receiver/Transmitter (UART) Data Register 232 * (read/write). 233 * Ser2UTSR0 Serial port 2 Universal Asynchronous 234 * Receiver/Transmitter (UART) Status Register 0 235 * (read/write). 236 * Ser2UTSR1 Serial port 2 Universal Asynchronous 237 * Receiver/Transmitter (UART) Status Register 1 (read). 238 * 239 * Ser3UTCR0 Serial port 3 Universal Asynchronous 240 * Receiver/Transmitter (UART) Control Register 0 241 * (read/write). 242 * Ser3UTCR1 Serial port 3 Universal Asynchronous 243 * Receiver/Transmitter (UART) Control Register 1 244 * (read/write). 245 * Ser3UTCR2 Serial port 3 Universal Asynchronous 246 * Receiver/Transmitter (UART) Control Register 2 247 * (read/write). 248 * Ser3UTCR3 Serial port 3 Universal Asynchronous 249 * Receiver/Transmitter (UART) Control Register 3 250 * (read/write). 251 * Ser3UTDR Serial port 3 Universal Asynchronous 252 * Receiver/Transmitter (UART) Data Register 253 * (read/write). 254 * Ser3UTSR0 Serial port 3 Universal Asynchronous 255 * Receiver/Transmitter (UART) Status Register 0 256 * (read/write). 257 * Ser3UTSR1 Serial port 3 Universal Asynchronous 258 * Receiver/Transmitter (UART) Status Register 1 (read). 259 * 260 * Clocks 261 * fxtl, Txtl Frequency, period of the system crystal (3.6864 MHz 262 * or 3.5795 MHz). 263 * fua, Tua Frequency, period of the UART communication. 264 */ 265 266 #define _UTCR0(Nb) __REG(0x80010000 + ((Nb) - 1)*0x00020000) /* UART Control Reg. 0 [1..3] */ 267 #define _UTCR1(Nb) __REG(0x80010004 + ((Nb) - 1)*0x00020000) /* UART Control Reg. 1 [1..3] */ 268 #define _UTCR2(Nb) __REG(0x80010008 + ((Nb) - 1)*0x00020000) /* UART Control Reg. 2 [1..3] */ 269 #define _UTCR3(Nb) __REG(0x8001000C + ((Nb) - 1)*0x00020000) /* UART Control Reg. 3 [1..3] */ 270 #define _UTCR4(Nb) __REG(0x80010010 + ((Nb) - 1)*0x00020000) /* UART Control Reg. 4 [2] */ 271 #define _UTDR(Nb) __REG(0x80010014 + ((Nb) - 1)*0x00020000) /* UART Data Reg. [1..3] */ 272 #define _UTSR0(Nb) __REG(0x8001001C + ((Nb) - 1)*0x00020000) /* UART Status Reg. 0 [1..3] */ 273 #define _UTSR1(Nb) __REG(0x80010020 + ((Nb) - 1)*0x00020000) /* UART Status Reg. 1 [1..3] */ 274 275 #define Ser1UTCR0 _UTCR0 (1) /* Ser. port 1 UART Control Reg. 0 */ 276 #define Ser1UTCR1 _UTCR1 (1) /* Ser. port 1 UART Control Reg. 1 */ 277 #define Ser1UTCR2 _UTCR2 (1) /* Ser. port 1 UART Control Reg. 2 */ 278 #define Ser1UTCR3 _UTCR3 (1) /* Ser. port 1 UART Control Reg. 3 */ 279 #define Ser1UTDR _UTDR (1) /* Ser. port 1 UART Data Reg. */ 280 #define Ser1UTSR0 _UTSR0 (1) /* Ser. port 1 UART Status Reg. 0 */ 281 #define Ser1UTSR1 _UTSR1 (1) /* Ser. port 1 UART Status Reg. 1 */ 282 283 #define Ser2UTCR0 _UTCR0 (2) /* Ser. port 2 UART Control Reg. 0 */ 284 #define Ser2UTCR1 _UTCR1 (2) /* Ser. port 2 UART Control Reg. 1 */ 285 #define Ser2UTCR2 _UTCR2 (2) /* Ser. port 2 UART Control Reg. 2 */ 286 #define Ser2UTCR3 _UTCR3 (2) /* Ser. port 2 UART Control Reg. 3 */ 287 #define Ser2UTCR4 _UTCR4 (2) /* Ser. port 2 UART Control Reg. 4 */ 288 #define Ser2UTDR _UTDR (2) /* Ser. port 2 UART Data Reg. */ 289 #define Ser2UTSR0 _UTSR0 (2) /* Ser. port 2 UART Status Reg. 0 */ 290 #define Ser2UTSR1 _UTSR1 (2) /* Ser. port 2 UART Status Reg. 1 */ 291 292 #define Ser3UTCR0 _UTCR0 (3) /* Ser. port 3 UART Control Reg. 0 */ 293 #define Ser3UTCR1 _UTCR1 (3) /* Ser. port 3 UART Control Reg. 1 */ 294 #define Ser3UTCR2 _UTCR2 (3) /* Ser. port 3 UART Control Reg. 2 */ 295 #define Ser3UTCR3 _UTCR3 (3) /* Ser. port 3 UART Control Reg. 3 */ 296 #define Ser3UTDR _UTDR (3) /* Ser. port 3 UART Data Reg. */ 297 #define Ser3UTSR0 _UTSR0 (3) /* Ser. port 3 UART Status Reg. 0 */ 298 #define Ser3UTSR1 _UTSR1 (3) /* Ser. port 3 UART Status Reg. 1 */ 299 300 /* Those are still used in some places */ 301 #define _Ser1UTCR0 __PREG(Ser1UTCR0) 302 #define _Ser2UTCR0 __PREG(Ser2UTCR0) 303 #define _Ser3UTCR0 __PREG(Ser3UTCR0) 304 305 /* Register offsets */ 306 #define UTCR0 0x00 307 #define UTCR1 0x04 308 #define UTCR2 0x08 309 #define UTCR3 0x0c 310 #define UTDR 0x14 311 #define UTSR0 0x1c 312 #define UTSR1 0x20 313 314 #define UTCR0_PE 0x00000001 /* Parity Enable */ 315 #define UTCR0_OES 0x00000002 /* Odd/Even parity Select */ 316 #define UTCR0_OddPar (UTCR0_OES*0) /* Odd Parity */ 317 #define UTCR0_EvenPar (UTCR0_OES*1) /* Even Parity */ 318 #define UTCR0_SBS 0x00000004 /* Stop Bit Select */ 319 #define UTCR0_1StpBit (UTCR0_SBS*0) /* 1 Stop Bit per frame */ 320 #define UTCR0_2StpBit (UTCR0_SBS*1) /* 2 Stop Bits per frame */ 321 #define UTCR0_DSS 0x00000008 /* Data Size Select */ 322 #define UTCR0_7BitData (UTCR0_DSS*0) /* 7-Bit Data */ 323 #define UTCR0_8BitData (UTCR0_DSS*1) /* 8-Bit Data */ 324 #define UTCR0_SCE 0x00000010 /* Sample Clock Enable */ 325 /* (ser. port 1: GPIO [18], */ 326 /* ser. port 3: GPIO [20]) */ 327 #define UTCR0_RCE 0x00000020 /* Receive Clock Edge select */ 328 #define UTCR0_RcRsEdg (UTCR0_RCE*0) /* Receive clock Rising-Edge */ 329 #define UTCR0_RcFlEdg (UTCR0_RCE*1) /* Receive clock Falling-Edge */ 330 #define UTCR0_TCE 0x00000040 /* Transmit Clock Edge select */ 331 #define UTCR0_TrRsEdg (UTCR0_TCE*0) /* Transmit clock Rising-Edge */ 332 #define UTCR0_TrFlEdg (UTCR0_TCE*1) /* Transmit clock Falling-Edge */ 333 #define UTCR0_Ser2IrDA /* Ser. port 2 IrDA settings */ \ 334 (UTCR0_1StpBit + UTCR0_8BitData) 335 336 #define UTCR1_BRD Fld (4, 0) /* Baud Rate Divisor/16 - 1 [11:8] */ 337 #define UTCR2_BRD Fld (8, 0) /* Baud Rate Divisor/16 - 1 [7:0] */ 338 /* fua = fxtl/(16*(BRD[11:0] + 1)) */ 339 /* Tua = 16*(BRD [11:0] + 1)*Txtl */ 340 #define UTCR1_BdRtDiv(Div) /* Baud Rate Divisor [16..65536] */ \ 341 (((Div) - 16)/16 >> FSize (UTCR2_BRD) << \ 342 FShft (UTCR1_BRD)) 343 #define UTCR2_BdRtDiv(Div) /* Baud Rate Divisor [16..65536] */ \ 344 (((Div) - 16)/16 & FAlnMsk (UTCR2_BRD) << \ 345 FShft (UTCR2_BRD)) 346 /* fua = fxtl/(16*Floor (Div/16)) */ 347 /* Tua = 16*Floor (Div/16)*Txtl */ 348 #define UTCR1_CeilBdRtDiv(Div) /* Ceil. of BdRtDiv [16..65536] */ \ 349 (((Div) - 1)/16 >> FSize (UTCR2_BRD) << \ 350 FShft (UTCR1_BRD)) 351 #define UTCR2_CeilBdRtDiv(Div) /* Ceil. of BdRtDiv [16..65536] */ \ 352 (((Div) - 1)/16 & FAlnMsk (UTCR2_BRD) << \ 353 FShft (UTCR2_BRD)) 354 /* fua = fxtl/(16*Ceil (Div/16)) */ 355 /* Tua = 16*Ceil (Div/16)*Txtl */ 356 357 #define UTCR3_RXE 0x00000001 /* Receive Enable */ 358 #define UTCR3_TXE 0x00000002 /* Transmit Enable */ 359 #define UTCR3_BRK 0x00000004 /* BReaK mode */ 360 #define UTCR3_RIE 0x00000008 /* Receive FIFO 1/3-to-2/3-full or */ 361 /* more Interrupt Enable */ 362 #define UTCR3_TIE 0x00000010 /* Transmit FIFO 1/2-full or less */ 363 /* Interrupt Enable */ 364 #define UTCR3_LBM 0x00000020 /* Look-Back Mode */ 365 #define UTCR3_Ser2IrDA /* Ser. port 2 IrDA settings (RIE, */ \ 366 /* TIE, LBM can be set or cleared) */ \ 367 (UTCR3_RXE + UTCR3_TXE) 368 369 #define UTCR4_HSE 0x00000001 /* Hewlett-Packard Serial InfraRed */ 370 /* (HP-SIR) modulation Enable */ 371 #define UTCR4_NRZ (UTCR4_HSE*0) /* Non-Return to Zero modulation */ 372 #define UTCR4_HPSIR (UTCR4_HSE*1) /* HP-SIR modulation */ 373 #define UTCR4_LPM 0x00000002 /* Low-Power Mode */ 374 #define UTCR4_Z3_16Bit (UTCR4_LPM*0) /* Zero pulse = 3/16 Bit time */ 375 #define UTCR4_Z1_6us (UTCR4_LPM*1) /* Zero pulse = 1.6 us */ 376 377 #define UTDR_DATA Fld (8, 0) /* receive/transmit DATA FIFOs */ 378 #if 0 /* Hidden receive FIFO bits */ 379 #define UTDR_PRE 0x00000100 /* receive PaRity Error (read) */ 380 #define UTDR_FRE 0x00000200 /* receive FRaming Error (read) */ 381 #define UTDR_ROR 0x00000400 /* Receive FIFO Over-Run (read) */ 382 #endif /* 0 */ 383 384 #define UTSR0_TFS 0x00000001 /* Transmit FIFO 1/2-full or less */ 385 /* Service request (read) */ 386 #define UTSR0_RFS 0x00000002 /* Receive FIFO 1/3-to-2/3-full or */ 387 /* more Service request (read) */ 388 #define UTSR0_RID 0x00000004 /* Receiver IDle */ 389 #define UTSR0_RBB 0x00000008 /* Receive Beginning of Break */ 390 #define UTSR0_REB 0x00000010 /* Receive End of Break */ 391 #define UTSR0_EIF 0x00000020 /* Error In FIFO (read) */ 392 393 #define UTSR1_TBY 0x00000001 /* Transmitter BusY (read) */ 394 #define UTSR1_RNE 0x00000002 /* Receive FIFO Not Empty (read) */ 395 #define UTSR1_TNF 0x00000004 /* Transmit FIFO Not Full (read) */ 396 #define UTSR1_PRE 0x00000008 /* receive PaRity Error (read) */ 397 #define UTSR1_FRE 0x00000010 /* receive FRaming Error (read) */ 398 #define UTSR1_ROR 0x00000020 /* Receive FIFO Over-Run (read) */ 399 400 401 /* 402 * Synchronous Data Link Controller (SDLC) control registers 403 * 404 * Registers 405 * Ser1SDCR0 Serial port 1 Synchronous Data Link Controller (SDLC) 406 * Control Register 0 (read/write). 407 * Ser1SDCR1 Serial port 1 Synchronous Data Link Controller (SDLC) 408 * Control Register 1 (read/write). 409 * Ser1SDCR2 Serial port 1 Synchronous Data Link Controller (SDLC) 410 * Control Register 2 (read/write). 411 * Ser1SDCR3 Serial port 1 Synchronous Data Link Controller (SDLC) 412 * Control Register 3 (read/write). 413 * Ser1SDCR4 Serial port 1 Synchronous Data Link Controller (SDLC) 414 * Control Register 4 (read/write). 415 * Ser1SDDR Serial port 1 Synchronous Data Link Controller (SDLC) 416 * Data Register (read/write). 417 * Ser1SDSR0 Serial port 1 Synchronous Data Link Controller (SDLC) 418 * Status Register 0 (read/write). 419 * Ser1SDSR1 Serial port 1 Synchronous Data Link Controller (SDLC) 420 * Status Register 1 (read/write). 421 * 422 * Clocks 423 * fxtl, Txtl Frequency, period of the system crystal (3.6864 MHz 424 * or 3.5795 MHz). 425 * fsd, Tsd Frequency, period of the SDLC communication. 426 */ 427 428 #define Ser1SDCR0 __REG(0x80020060) /* Ser. port 1 SDLC Control Reg. 0 */ 429 #define Ser1SDCR1 __REG(0x80020064) /* Ser. port 1 SDLC Control Reg. 1 */ 430 #define Ser1SDCR2 __REG(0x80020068) /* Ser. port 1 SDLC Control Reg. 2 */ 431 #define Ser1SDCR3 __REG(0x8002006C) /* Ser. port 1 SDLC Control Reg. 3 */ 432 #define Ser1SDCR4 __REG(0x80020070) /* Ser. port 1 SDLC Control Reg. 4 */ 433 #define Ser1SDDR __REG(0x80020078) /* Ser. port 1 SDLC Data Reg. */ 434 #define Ser1SDSR0 __REG(0x80020080) /* Ser. port 1 SDLC Status Reg. 0 */ 435 #define Ser1SDSR1 __REG(0x80020084) /* Ser. port 1 SDLC Status Reg. 1 */ 436 437 #define SDCR0_SUS 0x00000001 /* SDLC/UART Select */ 438 #define SDCR0_SDLC (SDCR0_SUS*0) /* SDLC mode (TXD1 & RXD1) */ 439 #define SDCR0_UART (SDCR0_SUS*1) /* UART mode (TXD1 & RXD1) */ 440 #define SDCR0_SDF 0x00000002 /* Single/Double start Flag select */ 441 #define SDCR0_SglFlg (SDCR0_SDF*0) /* Single start Flag */ 442 #define SDCR0_DblFlg (SDCR0_SDF*1) /* Double start Flag */ 443 #define SDCR0_LBM 0x00000004 /* Look-Back Mode */ 444 #define SDCR0_BMS 0x00000008 /* Bit Modulation Select */ 445 #define SDCR0_FM0 (SDCR0_BMS*0) /* Freq. Modulation zero (0) */ 446 #define SDCR0_NRZ (SDCR0_BMS*1) /* Non-Return to Zero modulation */ 447 #define SDCR0_SCE 0x00000010 /* Sample Clock Enable (GPIO [16]) */ 448 #define SDCR0_SCD 0x00000020 /* Sample Clock Direction select */ 449 /* (GPIO [16]) */ 450 #define SDCR0_SClkIn (SDCR0_SCD*0) /* Sample Clock Input */ 451 #define SDCR0_SClkOut (SDCR0_SCD*1) /* Sample Clock Output */ 452 #define SDCR0_RCE 0x00000040 /* Receive Clock Edge select */ 453 #define SDCR0_RcRsEdg (SDCR0_RCE*0) /* Receive clock Rising-Edge */ 454 #define SDCR0_RcFlEdg (SDCR0_RCE*1) /* Receive clock Falling-Edge */ 455 #define SDCR0_TCE 0x00000080 /* Transmit Clock Edge select */ 456 #define SDCR0_TrRsEdg (SDCR0_TCE*0) /* Transmit clock Rising-Edge */ 457 #define SDCR0_TrFlEdg (SDCR0_TCE*1) /* Transmit clock Falling-Edge */ 458 459 #define SDCR1_AAF 0x00000001 /* Abort After Frame enable */ 460 /* (GPIO [17]) */ 461 #define SDCR1_TXE 0x00000002 /* Transmit Enable */ 462 #define SDCR1_RXE 0x00000004 /* Receive Enable */ 463 #define SDCR1_RIE 0x00000008 /* Receive FIFO 1/3-to-2/3-full or */ 464 /* more Interrupt Enable */ 465 #define SDCR1_TIE 0x00000010 /* Transmit FIFO 1/2-full or less */ 466 /* Interrupt Enable */ 467 #define SDCR1_AME 0x00000020 /* Address Match Enable */ 468 #define SDCR1_TUS 0x00000040 /* Transmit FIFO Under-run Select */ 469 #define SDCR1_EFrmURn (SDCR1_TUS*0) /* End Frame on Under-Run */ 470 #define SDCR1_AbortURn (SDCR1_TUS*1) /* Abort on Under-Run */ 471 #define SDCR1_RAE 0x00000080 /* Receive Abort interrupt Enable */ 472 473 #define SDCR2_AMV Fld (8, 0) /* Address Match Value */ 474 475 #define SDCR3_BRD Fld (4, 0) /* Baud Rate Divisor/16 - 1 [11:8] */ 476 #define SDCR4_BRD Fld (8, 0) /* Baud Rate Divisor/16 - 1 [7:0] */ 477 /* fsd = fxtl/(16*(BRD[11:0] + 1)) */ 478 /* Tsd = 16*(BRD[11:0] + 1)*Txtl */ 479 #define SDCR3_BdRtDiv(Div) /* Baud Rate Divisor [16..65536] */ \ 480 (((Div) - 16)/16 >> FSize (SDCR4_BRD) << \ 481 FShft (SDCR3_BRD)) 482 #define SDCR4_BdRtDiv(Div) /* Baud Rate Divisor [16..65536] */ \ 483 (((Div) - 16)/16 & FAlnMsk (SDCR4_BRD) << \ 484 FShft (SDCR4_BRD)) 485 /* fsd = fxtl/(16*Floor (Div/16)) */ 486 /* Tsd = 16*Floor (Div/16)*Txtl */ 487 #define SDCR3_CeilBdRtDiv(Div) /* Ceil. of BdRtDiv [16..65536] */ \ 488 (((Div) - 1)/16 >> FSize (SDCR4_BRD) << \ 489 FShft (SDCR3_BRD)) 490 #define SDCR4_CeilBdRtDiv(Div) /* Ceil. of BdRtDiv [16..65536] */ \ 491 (((Div) - 1)/16 & FAlnMsk (SDCR4_BRD) << \ 492 FShft (SDCR4_BRD)) 493 /* fsd = fxtl/(16*Ceil (Div/16)) */ 494 /* Tsd = 16*Ceil (Div/16)*Txtl */ 495 496 #define SDDR_DATA Fld (8, 0) /* receive/transmit DATA FIFOs */ 497 #if 0 /* Hidden receive FIFO bits */ 498 #define SDDR_EOF 0x00000100 /* receive End-Of-Frame (read) */ 499 #define SDDR_CRE 0x00000200 /* receive CRC Error (read) */ 500 #define SDDR_ROR 0x00000400 /* Receive FIFO Over-Run (read) */ 501 #endif /* 0 */ 502 503 #define SDSR0_EIF 0x00000001 /* Error In FIFO (read) */ 504 #define SDSR0_TUR 0x00000002 /* Transmit FIFO Under-Run */ 505 #define SDSR0_RAB 0x00000004 /* Receive ABort */ 506 #define SDSR0_TFS 0x00000008 /* Transmit FIFO 1/2-full or less */ 507 /* Service request (read) */ 508 #define SDSR0_RFS 0x00000010 /* Receive FIFO 1/3-to-2/3-full or */ 509 /* more Service request (read) */ 510 511 #define SDSR1_RSY 0x00000001 /* Receiver SYnchronized (read) */ 512 #define SDSR1_TBY 0x00000002 /* Transmitter BusY (read) */ 513 #define SDSR1_RNE 0x00000004 /* Receive FIFO Not Empty (read) */ 514 #define SDSR1_TNF 0x00000008 /* Transmit FIFO Not Full (read) */ 515 #define SDSR1_RTD 0x00000010 /* Receive Transition Detected */ 516 #define SDSR1_EOF 0x00000020 /* receive End-Of-Frame (read) */ 517 #define SDSR1_CRE 0x00000040 /* receive CRC Error (read) */ 518 #define SDSR1_ROR 0x00000080 /* Receive FIFO Over-Run (read) */ 519 520 521 /* 522 * High-Speed Serial to Parallel controller (HSSP) control registers 523 * 524 * Registers 525 * Ser2HSCR0 Serial port 2 High-Speed Serial to Parallel 526 * controller (HSSP) Control Register 0 (read/write). 527 * Ser2HSCR1 Serial port 2 High-Speed Serial to Parallel 528 * controller (HSSP) Control Register 1 (read/write). 529 * Ser2HSDR Serial port 2 High-Speed Serial to Parallel 530 * controller (HSSP) Data Register (read/write). 531 * Ser2HSSR0 Serial port 2 High-Speed Serial to Parallel 532 * controller (HSSP) Status Register 0 (read/write). 533 * Ser2HSSR1 Serial port 2 High-Speed Serial to Parallel 534 * controller (HSSP) Status Register 1 (read). 535 * Ser2HSCR2 Serial port 2 High-Speed Serial to Parallel 536 * controller (HSSP) Control Register 2 (read/write). 537 * [The HSCR2 register is only implemented in 538 * versions 2.0 (rev. = 8) and higher of the StrongARM 539 * SA-1100.] 540 */ 541 542 #define Ser2HSCR0 __REG(0x80040060) /* Ser. port 2 HSSP Control Reg. 0 */ 543 #define Ser2HSCR1 __REG(0x80040064) /* Ser. port 2 HSSP Control Reg. 1 */ 544 #define Ser2HSDR __REG(0x8004006C) /* Ser. port 2 HSSP Data Reg. */ 545 #define Ser2HSSR0 __REG(0x80040074) /* Ser. port 2 HSSP Status Reg. 0 */ 546 #define Ser2HSSR1 __REG(0x80040078) /* Ser. port 2 HSSP Status Reg. 1 */ 547 #define Ser2HSCR2 __REG(0x90060028) /* Ser. port 2 HSSP Control Reg. 2 */ 548 549 #define HSCR0_ITR 0x00000001 /* IrDA Transmission Rate */ 550 #define HSCR0_UART (HSCR0_ITR*0) /* UART mode (115.2 kb/s if IrDA) */ 551 #define HSCR0_HSSP (HSCR0_ITR*1) /* HSSP mode (4 Mb/s) */ 552 #define HSCR0_LBM 0x00000002 /* Look-Back Mode */ 553 #define HSCR0_TUS 0x00000004 /* Transmit FIFO Under-run Select */ 554 #define HSCR0_EFrmURn (HSCR0_TUS*0) /* End Frame on Under-Run */ 555 #define HSCR0_AbortURn (HSCR0_TUS*1) /* Abort on Under-Run */ 556 #define HSCR0_TXE 0x00000008 /* Transmit Enable */ 557 #define HSCR0_RXE 0x00000010 /* Receive Enable */ 558 #define HSCR0_RIE 0x00000020 /* Receive FIFO 2/5-to-3/5-full or */ 559 /* more Interrupt Enable */ 560 #define HSCR0_TIE 0x00000040 /* Transmit FIFO 1/2-full or less */ 561 /* Interrupt Enable */ 562 #define HSCR0_AME 0x00000080 /* Address Match Enable */ 563 564 #define HSCR1_AMV Fld (8, 0) /* Address Match Value */ 565 566 #define HSDR_DATA Fld (8, 0) /* receive/transmit DATA FIFOs */ 567 #if 0 /* Hidden receive FIFO bits */ 568 #define HSDR_EOF 0x00000100 /* receive End-Of-Frame (read) */ 569 #define HSDR_CRE 0x00000200 /* receive CRC Error (read) */ 570 #define HSDR_ROR 0x00000400 /* Receive FIFO Over-Run (read) */ 571 #endif /* 0 */ 572 573 #define HSSR0_EIF 0x00000001 /* Error In FIFO (read) */ 574 #define HSSR0_TUR 0x00000002 /* Transmit FIFO Under-Run */ 575 #define HSSR0_RAB 0x00000004 /* Receive ABort */ 576 #define HSSR0_TFS 0x00000008 /* Transmit FIFO 1/2-full or less */ 577 /* Service request (read) */ 578 #define HSSR0_RFS 0x00000010 /* Receive FIFO 2/5-to-3/5-full or */ 579 /* more Service request (read) */ 580 #define HSSR0_FRE 0x00000020 /* receive FRaming Error */ 581 582 #define HSSR1_RSY 0x00000001 /* Receiver SYnchronized (read) */ 583 #define HSSR1_TBY 0x00000002 /* Transmitter BusY (read) */ 584 #define HSSR1_RNE 0x00000004 /* Receive FIFO Not Empty (read) */ 585 #define HSSR1_TNF 0x00000008 /* Transmit FIFO Not Full (read) */ 586 #define HSSR1_EOF 0x00000010 /* receive End-Of-Frame (read) */ 587 #define HSSR1_CRE 0x00000020 /* receive CRC Error (read) */ 588 #define HSSR1_ROR 0x00000040 /* Receive FIFO Over-Run (read) */ 589 590 #define HSCR2_TXP 0x00040000 /* Transmit data Polarity (TXD_2) */ 591 #define HSCR2_TrDataL (HSCR2_TXP*0) /* Transmit Data active Low */ 592 /* (inverted) */ 593 #define HSCR2_TrDataH (HSCR2_TXP*1) /* Transmit Data active High */ 594 /* (non-inverted) */ 595 #define HSCR2_RXP 0x00080000 /* Receive data Polarity (RXD_2) */ 596 #define HSCR2_RcDataL (HSCR2_RXP*0) /* Receive Data active Low */ 597 /* (inverted) */ 598 #define HSCR2_RcDataH (HSCR2_RXP*1) /* Receive Data active High */ 599 /* (non-inverted) */ 600 601 602 /* 603 * Multi-media Communications Port (MCP) control registers 604 * 605 * Registers 606 * Ser4MCCR0 Serial port 4 Multi-media Communications Port (MCP) 607 * Control Register 0 (read/write). 608 * Ser4MCDR0 Serial port 4 Multi-media Communications Port (MCP) 609 * Data Register 0 (audio, read/write). 610 * Ser4MCDR1 Serial port 4 Multi-media Communications Port (MCP) 611 * Data Register 1 (telecom, read/write). 612 * Ser4MCDR2 Serial port 4 Multi-media Communications Port (MCP) 613 * Data Register 2 (CODEC registers, read/write). 614 * Ser4MCSR Serial port 4 Multi-media Communications Port (MCP) 615 * Status Register (read/write). 616 * Ser4MCCR1 Serial port 4 Multi-media Communications Port (MCP) 617 * Control Register 1 (read/write). 618 * [The MCCR1 register is only implemented in 619 * versions 2.0 (rev. = 8) and higher of the StrongARM 620 * SA-1100.] 621 * 622 * Clocks 623 * fmc, Tmc Frequency, period of the MCP communication (10 MHz, 624 * 12 MHz, or GPIO [21]). 625 * faud, Taud Frequency, period of the audio sampling. 626 * ftcm, Ttcm Frequency, period of the telecom sampling. 627 */ 628 629 #define Ser4MCCR0 __REG(0x80060000) /* Ser. port 4 MCP Control Reg. 0 */ 630 #define Ser4MCDR0 __REG(0x80060008) /* Ser. port 4 MCP Data Reg. 0 (audio) */ 631 #define Ser4MCDR1 __REG(0x8006000C) /* Ser. port 4 MCP Data Reg. 1 (telecom) */ 632 #define Ser4MCDR2 __REG(0x80060010) /* Ser. port 4 MCP Data Reg. 2 (CODEC reg.) */ 633 #define Ser4MCSR __REG(0x80060018) /* Ser. port 4 MCP Status Reg. */ 634 #define Ser4MCCR1 __REG(0x90060030) /* Ser. port 4 MCP Control Reg. 1 */ 635 636 #define MCCR0_ASD Fld (7, 0) /* Audio Sampling rate Divisor/32 */ 637 /* [6..127] */ 638 /* faud = fmc/(32*ASD) */ 639 /* Taud = 32*ASD*Tmc */ 640 #define MCCR0_AudSmpDiv(Div) /* Audio Sampling rate Divisor */ \ 641 /* [192..4064] */ \ 642 ((Div)/32 << FShft (MCCR0_ASD)) 643 /* faud = fmc/(32*Floor (Div/32)) */ 644 /* Taud = 32*Floor (Div/32)*Tmc */ 645 #define MCCR0_CeilAudSmpDiv(Div) /* Ceil. of AudSmpDiv [192..4064] */ \ 646 (((Div) + 31)/32 << FShft (MCCR0_ASD)) 647 /* faud = fmc/(32*Ceil (Div/32)) */ 648 /* Taud = 32*Ceil (Div/32)*Tmc */ 649 #define MCCR0_TSD Fld (7, 8) /* Telecom Sampling rate */ 650 /* Divisor/32 [16..127] */ 651 /* ftcm = fmc/(32*TSD) */ 652 /* Ttcm = 32*TSD*Tmc */ 653 #define MCCR0_TcmSmpDiv(Div) /* Telecom Sampling rate Divisor */ \ 654 /* [512..4064] */ \ 655 ((Div)/32 << FShft (MCCR0_TSD)) 656 /* ftcm = fmc/(32*Floor (Div/32)) */ 657 /* Ttcm = 32*Floor (Div/32)*Tmc */ 658 #define MCCR0_CeilTcmSmpDiv(Div) /* Ceil. of TcmSmpDiv [512..4064] */ \ 659 (((Div) + 31)/32 << FShft (MCCR0_TSD)) 660 /* ftcm = fmc/(32*Ceil (Div/32)) */ 661 /* Ttcm = 32*Ceil (Div/32)*Tmc */ 662 #define MCCR0_MCE 0x00010000 /* MCP Enable */ 663 #define MCCR0_ECS 0x00020000 /* External Clock Select */ 664 #define MCCR0_IntClk (MCCR0_ECS*0) /* Internal Clock (10 or 12 MHz) */ 665 #define MCCR0_ExtClk (MCCR0_ECS*1) /* External Clock (GPIO [21]) */ 666 #define MCCR0_ADM 0x00040000 /* A/D (audio/telecom) data */ 667 /* sampling/storing Mode */ 668 #define MCCR0_VldBit (MCCR0_ADM*0) /* Valid Bit storing mode */ 669 #define MCCR0_SmpCnt (MCCR0_ADM*1) /* Sampling Counter storing mode */ 670 #define MCCR0_TTE 0x00080000 /* Telecom Transmit FIFO 1/2-full */ 671 /* or less interrupt Enable */ 672 #define MCCR0_TRE 0x00100000 /* Telecom Receive FIFO 1/2-full */ 673 /* or more interrupt Enable */ 674 #define MCCR0_ATE 0x00200000 /* Audio Transmit FIFO 1/2-full */ 675 /* or less interrupt Enable */ 676 #define MCCR0_ARE 0x00400000 /* Audio Receive FIFO 1/2-full or */ 677 /* more interrupt Enable */ 678 #define MCCR0_LBM 0x00800000 /* Look-Back Mode */ 679 #define MCCR0_ECP Fld (2, 24) /* External Clock Prescaler - 1 */ 680 #define MCCR0_ExtClkDiv(Div) /* External Clock Divisor [1..4] */ \ 681 (((Div) - 1) << FShft (MCCR0_ECP)) 682 683 #define MCDR0_DATA Fld (12, 4) /* receive/transmit audio DATA */ 684 /* FIFOs */ 685 686 #define MCDR1_DATA Fld (14, 2) /* receive/transmit telecom DATA */ 687 /* FIFOs */ 688 689 /* receive/transmit CODEC reg. */ 690 /* FIFOs: */ 691 #define MCDR2_DATA Fld (16, 0) /* reg. DATA */ 692 #define MCDR2_RW 0x00010000 /* reg. Read/Write (transmit) */ 693 #define MCDR2_Rd (MCDR2_RW*0) /* reg. Read */ 694 #define MCDR2_Wr (MCDR2_RW*1) /* reg. Write */ 695 #define MCDR2_ADD Fld (4, 17) /* reg. ADDress */ 696 697 #define MCSR_ATS 0x00000001 /* Audio Transmit FIFO 1/2-full */ 698 /* or less Service request (read) */ 699 #define MCSR_ARS 0x00000002 /* Audio Receive FIFO 1/2-full or */ 700 /* more Service request (read) */ 701 #define MCSR_TTS 0x00000004 /* Telecom Transmit FIFO 1/2-full */ 702 /* or less Service request (read) */ 703 #define MCSR_TRS 0x00000008 /* Telecom Receive FIFO 1/2-full */ 704 /* or more Service request (read) */ 705 #define MCSR_ATU 0x00000010 /* Audio Transmit FIFO Under-run */ 706 #define MCSR_ARO 0x00000020 /* Audio Receive FIFO Over-run */ 707 #define MCSR_TTU 0x00000040 /* Telecom Transmit FIFO Under-run */ 708 #define MCSR_TRO 0x00000080 /* Telecom Receive FIFO Over-run */ 709 #define MCSR_ANF 0x00000100 /* Audio transmit FIFO Not Full */ 710 /* (read) */ 711 #define MCSR_ANE 0x00000200 /* Audio receive FIFO Not Empty */ 712 /* (read) */ 713 #define MCSR_TNF 0x00000400 /* Telecom transmit FIFO Not Full */ 714 /* (read) */ 715 #define MCSR_TNE 0x00000800 /* Telecom receive FIFO Not Empty */ 716 /* (read) */ 717 #define MCSR_CWC 0x00001000 /* CODEC register Write Completed */ 718 /* (read) */ 719 #define MCSR_CRC 0x00002000 /* CODEC register Read Completed */ 720 /* (read) */ 721 #define MCSR_ACE 0x00004000 /* Audio CODEC Enabled (read) */ 722 #define MCSR_TCE 0x00008000 /* Telecom CODEC Enabled (read) */ 723 724 #define MCCR1_CFS 0x00100000 /* Clock Freq. Select */ 725 #define MCCR1_F12MHz (MCCR1_CFS*0) /* Freq. (fmc) = ~ 12 MHz */ 726 /* (11.981 MHz) */ 727 #define MCCR1_F10MHz (MCCR1_CFS*1) /* Freq. (fmc) = ~ 10 MHz */ 728 /* (9.585 MHz) */ 729 730 731 /* 732 * Synchronous Serial Port (SSP) control registers 733 * 734 * Registers 735 * Ser4SSCR0 Serial port 4 Synchronous Serial Port (SSP) Control 736 * Register 0 (read/write). 737 * Ser4SSCR1 Serial port 4 Synchronous Serial Port (SSP) Control 738 * Register 1 (read/write). 739 * [Bits SPO and SP are only implemented in versions 2.0 740 * (rev. = 8) and higher of the StrongARM SA-1100.] 741 * Ser4SSDR Serial port 4 Synchronous Serial Port (SSP) Data 742 * Register (read/write). 743 * Ser4SSSR Serial port 4 Synchronous Serial Port (SSP) Status 744 * Register (read/write). 745 * 746 * Clocks 747 * fxtl, Txtl Frequency, period of the system crystal (3.6864 MHz 748 * or 3.5795 MHz). 749 * fss, Tss Frequency, period of the SSP communication. 750 */ 751 752 #define Ser4SSCR0 __REG(0x80070060) /* Ser. port 4 SSP Control Reg. 0 */ 753 #define Ser4SSCR1 __REG(0x80070064) /* Ser. port 4 SSP Control Reg. 1 */ 754 #define Ser4SSDR __REG(0x8007006C) /* Ser. port 4 SSP Data Reg. */ 755 #define Ser4SSSR __REG(0x80070074) /* Ser. port 4 SSP Status Reg. */ 756 757 #define SSCR0_DSS Fld (4, 0) /* Data Size - 1 Select [3..15] */ 758 #define SSCR0_DataSize(Size) /* Data Size Select [4..16] */ \ 759 (((Size) - 1) << FShft (SSCR0_DSS)) 760 #define SSCR0_FRF Fld (2, 4) /* FRame Format */ 761 #define SSCR0_Motorola /* Motorola Serial Peripheral */ \ 762 /* Interface (SPI) format */ \ 763 (0 << FShft (SSCR0_FRF)) 764 #define SSCR0_TI /* Texas Instruments Synchronous */ \ 765 /* Serial format */ \ 766 (1 << FShft (SSCR0_FRF)) 767 #define SSCR0_National /* National Microwire format */ \ 768 (2 << FShft (SSCR0_FRF)) 769 #define SSCR0_SSE 0x00000080 /* SSP Enable */ 770 #define SSCR0_SCR Fld (8, 8) /* Serial Clock Rate divisor/2 - 1 */ 771 /* fss = fxtl/(2*(SCR + 1)) */ 772 /* Tss = 2*(SCR + 1)*Txtl */ 773 #define SSCR0_SerClkDiv(Div) /* Serial Clock Divisor [2..512] */ \ 774 (((Div) - 2)/2 << FShft (SSCR0_SCR)) 775 /* fss = fxtl/(2*Floor (Div/2)) */ 776 /* Tss = 2*Floor (Div/2)*Txtl */ 777 #define SSCR0_CeilSerClkDiv(Div) /* Ceil. of SerClkDiv [2..512] */ \ 778 (((Div) - 1)/2 << FShft (SSCR0_SCR)) 779 /* fss = fxtl/(2*Ceil (Div/2)) */ 780 /* Tss = 2*Ceil (Div/2)*Txtl */ 781 782 #define SSCR1_RIE 0x00000001 /* Receive FIFO 1/2-full or more */ 783 /* Interrupt Enable */ 784 #define SSCR1_TIE 0x00000002 /* Transmit FIFO 1/2-full or less */ 785 /* Interrupt Enable */ 786 #define SSCR1_LBM 0x00000004 /* Look-Back Mode */ 787 #define SSCR1_SPO 0x00000008 /* Sample clock (SCLK) POlarity */ 788 #define SSCR1_SClkIactL (SSCR1_SPO*0) /* Sample Clock Inactive Low */ 789 #define SSCR1_SClkIactH (SSCR1_SPO*1) /* Sample Clock Inactive High */ 790 #define SSCR1_SP 0x00000010 /* Sample clock (SCLK) Phase */ 791 #define SSCR1_SClk1P (SSCR1_SP*0) /* Sample Clock active 1 Period */ 792 /* after frame (SFRM, 1st edge) */ 793 #define SSCR1_SClk1_2P (SSCR1_SP*1) /* Sample Clock active 1/2 Period */ 794 /* after frame (SFRM, 1st edge) */ 795 #define SSCR1_ECS 0x00000020 /* External Clock Select */ 796 #define SSCR1_IntClk (SSCR1_ECS*0) /* Internal Clock */ 797 #define SSCR1_ExtClk (SSCR1_ECS*1) /* External Clock (GPIO [19]) */ 798 799 #define SSDR_DATA Fld (16, 0) /* receive/transmit DATA FIFOs */ 800 801 #define SSSR_TNF 0x00000002 /* Transmit FIFO Not Full (read) */ 802 #define SSSR_RNE 0x00000004 /* Receive FIFO Not Empty (read) */ 803 #define SSSR_BSY 0x00000008 /* SSP BuSY (read) */ 804 #define SSSR_TFS 0x00000010 /* Transmit FIFO 1/2-full or less */ 805 /* Service request (read) */ 806 #define SSSR_RFS 0x00000020 /* Receive FIFO 1/2-full or more */ 807 /* Service request (read) */ 808 #define SSSR_ROR 0x00000040 /* Receive FIFO Over-Run */ 809 810 811 /* 812 * Operating System (OS) timer control registers 813 * 814 * Registers 815 * OSMR0 Operating System (OS) timer Match Register 0 816 * (read/write). 817 * OSMR1 Operating System (OS) timer Match Register 1 818 * (read/write). 819 * OSMR2 Operating System (OS) timer Match Register 2 820 * (read/write). 821 * OSMR3 Operating System (OS) timer Match Register 3 822 * (read/write). 823 * OSCR Operating System (OS) timer Counter Register 824 * (read/write). 825 * OSSR Operating System (OS) timer Status Register 826 * (read/write). 827 * OWER Operating System (OS) timer Watch-dog Enable Register 828 * (read/write). 829 * OIER Operating System (OS) timer Interrupt Enable Register 830 * (read/write). 831 */ 832 833 #define OSMR0 io_p2v(0x90000000) /* OS timer Match Reg. 0 */ 834 #define OSMR1 io_p2v(0x90000004) /* OS timer Match Reg. 1 */ 835 #define OSMR2 io_p2v(0x90000008) /* OS timer Match Reg. 2 */ 836 #define OSMR3 io_p2v(0x9000000c) /* OS timer Match Reg. 3 */ 837 #define OSCR io_p2v(0x90000010) /* OS timer Counter Reg. */ 838 #define OSSR io_p2v(0x90000014) /* OS timer Status Reg. */ 839 #define OWER io_p2v(0x90000018) /* OS timer Watch-dog Enable Reg. */ 840 #define OIER io_p2v(0x9000001C) /* OS timer Interrupt Enable Reg. */ 841 842 #define OSSR_M(Nb) /* Match detected [0..3] */ \ 843 (0x00000001 << (Nb)) 844 #define OSSR_M0 OSSR_M (0) /* Match detected 0 */ 845 #define OSSR_M1 OSSR_M (1) /* Match detected 1 */ 846 #define OSSR_M2 OSSR_M (2) /* Match detected 2 */ 847 #define OSSR_M3 OSSR_M (3) /* Match detected 3 */ 848 849 #define OWER_WME 0x00000001 /* Watch-dog Match Enable */ 850 /* (set only) */ 851 852 #define OIER_E(Nb) /* match interrupt Enable [0..3] */ \ 853 (0x00000001 << (Nb)) 854 #define OIER_E0 OIER_E (0) /* match interrupt Enable 0 */ 855 #define OIER_E1 OIER_E (1) /* match interrupt Enable 1 */ 856 #define OIER_E2 OIER_E (2) /* match interrupt Enable 2 */ 857 #define OIER_E3 OIER_E (3) /* match interrupt Enable 3 */ 858 859 860 /* 861 * Real-Time Clock (RTC) control registers 862 * 863 * Registers 864 * RTAR Real-Time Clock (RTC) Alarm Register (read/write). 865 * RCNR Real-Time Clock (RTC) CouNt Register (read/write). 866 * RTTR Real-Time Clock (RTC) Trim Register (read/write). 867 * RTSR Real-Time Clock (RTC) Status Register (read/write). 868 * 869 * Clocks 870 * frtx, Trtx Frequency, period of the real-time clock crystal 871 * (32.768 kHz nominal). 872 * frtc, Trtc Frequency, period of the real-time clock counter 873 * (1 Hz nominal). 874 */ 875 876 #define RTAR __REG(0x90010000) /* RTC Alarm Reg. */ 877 #define RCNR __REG(0x90010004) /* RTC CouNt Reg. */ 878 #define RTTR __REG(0x90010008) /* RTC Trim Reg. */ 879 #define RTSR __REG(0x90010010) /* RTC Status Reg. */ 880 881 #define RTTR_C Fld (16, 0) /* clock divider Count - 1 */ 882 #define RTTR_D Fld (10, 16) /* trim Delete count */ 883 /* frtc = (1023*(C + 1) - D)*frtx/ */ 884 /* (1023*(C + 1)^2) */ 885 /* Trtc = (1023*(C + 1)^2)*Trtx/ */ 886 /* (1023*(C + 1) - D) */ 887 888 #define RTSR_AL 0x00000001 /* ALarm detected */ 889 #define RTSR_HZ 0x00000002 /* 1 Hz clock detected */ 890 #define RTSR_ALE 0x00000004 /* ALarm interrupt Enable */ 891 #define RTSR_HZE 0x00000008 /* 1 Hz clock interrupt Enable */ 892 893 894 /* 895 * Power Manager (PM) control registers 896 * 897 * Registers 898 * PMCR Power Manager (PM) Control Register (read/write). 899 * PSSR Power Manager (PM) Sleep Status Register (read/write). 900 * PSPR Power Manager (PM) Scratch-Pad Register (read/write). 901 * PWER Power Manager (PM) Wake-up Enable Register 902 * (read/write). 903 * PCFR Power Manager (PM) general ConFiguration Register 904 * (read/write). 905 * PPCR Power Manager (PM) Phase-Locked Loop (PLL) 906 * Configuration Register (read/write). 907 * PGSR Power Manager (PM) General-Purpose Input/Output (GPIO) 908 * Sleep state Register (read/write, see GPIO pins). 909 * POSR Power Manager (PM) Oscillator Status Register (read). 910 * 911 * Clocks 912 * fxtl, Txtl Frequency, period of the system crystal (3.6864 MHz 913 * or 3.5795 MHz). 914 * fcpu, Tcpu Frequency, period of the CPU core clock (CCLK). 915 */ 916 917 #define PMCR __REG(0x90020000) /* PM Control Reg. */ 918 #define PSSR __REG(0x90020004) /* PM Sleep Status Reg. */ 919 #define PSPR __REG(0x90020008) /* PM Scratch-Pad Reg. */ 920 #define PWER __REG(0x9002000C) /* PM Wake-up Enable Reg. */ 921 #define PCFR __REG(0x90020010) /* PM general ConFiguration Reg. */ 922 #define PPCR __REG(0x90020014) /* PM PLL Configuration Reg. */ 923 #define PGSR __REG(0x90020018) /* PM GPIO Sleep state Reg. */ 924 #define POSR __REG(0x9002001C) /* PM Oscillator Status Reg. */ 925 926 #define PMCR_SF 0x00000001 /* Sleep Force (set only) */ 927 928 #define PSSR_SS 0x00000001 /* Software Sleep */ 929 #define PSSR_BFS 0x00000002 /* Battery Fault Status */ 930 /* (BATT_FAULT) */ 931 #define PSSR_VFS 0x00000004 /* Vdd Fault Status (VDD_FAULT) */ 932 #define PSSR_DH 0x00000008 /* DRAM control Hold */ 933 #define PSSR_PH 0x00000010 /* Peripheral control Hold */ 934 935 #define PWER_GPIO(Nb) GPIO_GPIO (Nb) /* GPIO [0..27] wake-up enable */ 936 #define PWER_GPIO0 PWER_GPIO (0) /* GPIO [0] wake-up enable */ 937 #define PWER_GPIO1 PWER_GPIO (1) /* GPIO [1] wake-up enable */ 938 #define PWER_GPIO2 PWER_GPIO (2) /* GPIO [2] wake-up enable */ 939 #define PWER_GPIO3 PWER_GPIO (3) /* GPIO [3] wake-up enable */ 940 #define PWER_GPIO4 PWER_GPIO (4) /* GPIO [4] wake-up enable */ 941 #define PWER_GPIO5 PWER_GPIO (5) /* GPIO [5] wake-up enable */ 942 #define PWER_GPIO6 PWER_GPIO (6) /* GPIO [6] wake-up enable */ 943 #define PWER_GPIO7 PWER_GPIO (7) /* GPIO [7] wake-up enable */ 944 #define PWER_GPIO8 PWER_GPIO (8) /* GPIO [8] wake-up enable */ 945 #define PWER_GPIO9 PWER_GPIO (9) /* GPIO [9] wake-up enable */ 946 #define PWER_GPIO10 PWER_GPIO (10) /* GPIO [10] wake-up enable */ 947 #define PWER_GPIO11 PWER_GPIO (11) /* GPIO [11] wake-up enable */ 948 #define PWER_GPIO12 PWER_GPIO (12) /* GPIO [12] wake-up enable */ 949 #define PWER_GPIO13 PWER_GPIO (13) /* GPIO [13] wake-up enable */ 950 #define PWER_GPIO14 PWER_GPIO (14) /* GPIO [14] wake-up enable */ 951 #define PWER_GPIO15 PWER_GPIO (15) /* GPIO [15] wake-up enable */ 952 #define PWER_GPIO16 PWER_GPIO (16) /* GPIO [16] wake-up enable */ 953 #define PWER_GPIO17 PWER_GPIO (17) /* GPIO [17] wake-up enable */ 954 #define PWER_GPIO18 PWER_GPIO (18) /* GPIO [18] wake-up enable */ 955 #define PWER_GPIO19 PWER_GPIO (19) /* GPIO [19] wake-up enable */ 956 #define PWER_GPIO20 PWER_GPIO (20) /* GPIO [20] wake-up enable */ 957 #define PWER_GPIO21 PWER_GPIO (21) /* GPIO [21] wake-up enable */ 958 #define PWER_GPIO22 PWER_GPIO (22) /* GPIO [22] wake-up enable */ 959 #define PWER_GPIO23 PWER_GPIO (23) /* GPIO [23] wake-up enable */ 960 #define PWER_GPIO24 PWER_GPIO (24) /* GPIO [24] wake-up enable */ 961 #define PWER_GPIO25 PWER_GPIO (25) /* GPIO [25] wake-up enable */ 962 #define PWER_GPIO26 PWER_GPIO (26) /* GPIO [26] wake-up enable */ 963 #define PWER_GPIO27 PWER_GPIO (27) /* GPIO [27] wake-up enable */ 964 #define PWER_RTC 0x80000000 /* RTC alarm wake-up enable */ 965 966 #define PCFR_OPDE 0x00000001 /* Oscillator Power-Down Enable */ 967 #define PCFR_ClkRun (PCFR_OPDE*0) /* Clock Running in sleep mode */ 968 #define PCFR_ClkStp (PCFR_OPDE*1) /* Clock Stopped in sleep mode */ 969 #define PCFR_FP 0x00000002 /* Float PCMCIA pins */ 970 #define PCFR_PCMCIANeg (PCFR_FP*0) /* PCMCIA pins Negated (1) */ 971 #define PCFR_PCMCIAFlt (PCFR_FP*1) /* PCMCIA pins Floating */ 972 #define PCFR_FS 0x00000004 /* Float Static memory pins */ 973 #define PCFR_StMemNeg (PCFR_FS*0) /* Static Memory pins Negated (1) */ 974 #define PCFR_StMemFlt (PCFR_FS*1) /* Static Memory pins Floating */ 975 #define PCFR_FO 0x00000008 /* Force RTC oscillator */ 976 /* (32.768 kHz) enable On */ 977 978 #define PPCR_CCF Fld (5, 0) /* CPU core Clock (CCLK) Freq. */ 979 #define PPCR_Fx16 /* Freq. x 16 (fcpu = 16*fxtl) */ \ 980 (0x00 << FShft (PPCR_CCF)) 981 #define PPCR_Fx20 /* Freq. x 20 (fcpu = 20*fxtl) */ \ 982 (0x01 << FShft (PPCR_CCF)) 983 #define PPCR_Fx24 /* Freq. x 24 (fcpu = 24*fxtl) */ \ 984 (0x02 << FShft (PPCR_CCF)) 985 #define PPCR_Fx28 /* Freq. x 28 (fcpu = 28*fxtl) */ \ 986 (0x03 << FShft (PPCR_CCF)) 987 #define PPCR_Fx32 /* Freq. x 32 (fcpu = 32*fxtl) */ \ 988 (0x04 << FShft (PPCR_CCF)) 989 #define PPCR_Fx36 /* Freq. x 36 (fcpu = 36*fxtl) */ \ 990 (0x05 << FShft (PPCR_CCF)) 991 #define PPCR_Fx40 /* Freq. x 40 (fcpu = 40*fxtl) */ \ 992 (0x06 << FShft (PPCR_CCF)) 993 #define PPCR_Fx44 /* Freq. x 44 (fcpu = 44*fxtl) */ \ 994 (0x07 << FShft (PPCR_CCF)) 995 #define PPCR_Fx48 /* Freq. x 48 (fcpu = 48*fxtl) */ \ 996 (0x08 << FShft (PPCR_CCF)) 997 #define PPCR_Fx52 /* Freq. x 52 (fcpu = 52*fxtl) */ \ 998 (0x09 << FShft (PPCR_CCF)) 999 #define PPCR_Fx56 /* Freq. x 56 (fcpu = 56*fxtl) */ \ 1000 (0x0A << FShft (PPCR_CCF)) 1001 #define PPCR_Fx60 /* Freq. x 60 (fcpu = 60*fxtl) */ \ 1002 (0x0B << FShft (PPCR_CCF)) 1003 #define PPCR_Fx64 /* Freq. x 64 (fcpu = 64*fxtl) */ \ 1004 (0x0C << FShft (PPCR_CCF)) 1005 #define PPCR_Fx68 /* Freq. x 68 (fcpu = 68*fxtl) */ \ 1006 (0x0D << FShft (PPCR_CCF)) 1007 #define PPCR_Fx72 /* Freq. x 72 (fcpu = 72*fxtl) */ \ 1008 (0x0E << FShft (PPCR_CCF)) 1009 #define PPCR_Fx76 /* Freq. x 76 (fcpu = 76*fxtl) */ \ 1010 (0x0F << FShft (PPCR_CCF)) 1011 /* 3.6864 MHz crystal (fxtl): */ 1012 #define PPCR_F59_0MHz PPCR_Fx16 /* Freq. (fcpu) = 59.0 MHz */ 1013 #define PPCR_F73_7MHz PPCR_Fx20 /* Freq. (fcpu) = 73.7 MHz */ 1014 #define PPCR_F88_5MHz PPCR_Fx24 /* Freq. (fcpu) = 88.5 MHz */ 1015 #define PPCR_F103_2MHz PPCR_Fx28 /* Freq. (fcpu) = 103.2 MHz */ 1016 #define PPCR_F118_0MHz PPCR_Fx32 /* Freq. (fcpu) = 118.0 MHz */ 1017 #define PPCR_F132_7MHz PPCR_Fx36 /* Freq. (fcpu) = 132.7 MHz */ 1018 #define PPCR_F147_5MHz PPCR_Fx40 /* Freq. (fcpu) = 147.5 MHz */ 1019 #define PPCR_F162_2MHz PPCR_Fx44 /* Freq. (fcpu) = 162.2 MHz */ 1020 #define PPCR_F176_9MHz PPCR_Fx48 /* Freq. (fcpu) = 176.9 MHz */ 1021 #define PPCR_F191_7MHz PPCR_Fx52 /* Freq. (fcpu) = 191.7 MHz */ 1022 #define PPCR_F206_4MHz PPCR_Fx56 /* Freq. (fcpu) = 206.4 MHz */ 1023 #define PPCR_F221_2MHz PPCR_Fx60 /* Freq. (fcpu) = 221.2 MHz */ 1024 #define PPCR_F239_6MHz PPCR_Fx64 /* Freq. (fcpu) = 239.6 MHz */ 1025 #define PPCR_F250_7MHz PPCR_Fx68 /* Freq. (fcpu) = 250.7 MHz */ 1026 #define PPCR_F265_4MHz PPCR_Fx72 /* Freq. (fcpu) = 265.4 MHz */ 1027 #define PPCR_F280_2MHz PPCR_Fx76 /* Freq. (fcpu) = 280.2 MHz */ 1028 /* 3.5795 MHz crystal (fxtl): */ 1029 #define PPCR_F57_3MHz PPCR_Fx16 /* Freq. (fcpu) = 57.3 MHz */ 1030 #define PPCR_F71_6MHz PPCR_Fx20 /* Freq. (fcpu) = 71.6 MHz */ 1031 #define PPCR_F85_9MHz PPCR_Fx24 /* Freq. (fcpu) = 85.9 MHz */ 1032 #define PPCR_F100_2MHz PPCR_Fx28 /* Freq. (fcpu) = 100.2 MHz */ 1033 #define PPCR_F114_5MHz PPCR_Fx32 /* Freq. (fcpu) = 114.5 MHz */ 1034 #define PPCR_F128_9MHz PPCR_Fx36 /* Freq. (fcpu) = 128.9 MHz */ 1035 #define PPCR_F143_2MHz PPCR_Fx40 /* Freq. (fcpu) = 143.2 MHz */ 1036 #define PPCR_F157_5MHz PPCR_Fx44 /* Freq. (fcpu) = 157.5 MHz */ 1037 #define PPCR_F171_8MHz PPCR_Fx48 /* Freq. (fcpu) = 171.8 MHz */ 1038 #define PPCR_F186_1MHz PPCR_Fx52 /* Freq. (fcpu) = 186.1 MHz */ 1039 #define PPCR_F200_5MHz PPCR_Fx56 /* Freq. (fcpu) = 200.5 MHz */ 1040 #define PPCR_F214_8MHz PPCR_Fx60 /* Freq. (fcpu) = 214.8 MHz */ 1041 #define PPCR_F229_1MHz PPCR_Fx64 /* Freq. (fcpu) = 229.1 MHz */ 1042 #define PPCR_F243_4MHz PPCR_Fx68 /* Freq. (fcpu) = 243.4 MHz */ 1043 #define PPCR_F257_7MHz PPCR_Fx72 /* Freq. (fcpu) = 257.7 MHz */ 1044 #define PPCR_F272_0MHz PPCR_Fx76 /* Freq. (fcpu) = 272.0 MHz */ 1045 1046 #define POSR_OOK 0x00000001 /* RTC Oscillator (32.768 kHz) OK */ 1047 1048 1049 /* 1050 * Reset Controller (RC) control registers 1051 * 1052 * Registers 1053 * RSRR Reset Controller (RC) Software Reset Register 1054 * (read/write). 1055 * RCSR Reset Controller (RC) Status Register (read/write). 1056 */ 1057 1058 #define RSRR __REG(0x90030000) /* RC Software Reset Reg. */ 1059 #define RCSR __REG(0x90030004) /* RC Status Reg. */ 1060 1061 #define RSRR_SWR 0x00000001 /* SoftWare Reset (set only) */ 1062 1063 #define RCSR_HWR 0x00000001 /* HardWare Reset */ 1064 #define RCSR_SWR 0x00000002 /* SoftWare Reset */ 1065 #define RCSR_WDR 0x00000004 /* Watch-Dog Reset */ 1066 #define RCSR_SMR 0x00000008 /* Sleep-Mode Reset */ 1067 1068 1069 /* 1070 * Test unit control registers 1071 * 1072 * Registers 1073 * TUCR Test Unit Control Register (read/write). 1074 */ 1075 1076 #define TUCR __REG(0x90030008) /* Test Unit Control Reg. */ 1077 1078 #define TUCR_TIC 0x00000040 /* TIC mode */ 1079 #define TUCR_TTST 0x00000080 /* Trim TeST mode */ 1080 #define TUCR_RCRC 0x00000100 /* Richard's Cyclic Redundancy */ 1081 /* Check */ 1082 #define TUCR_PMD 0x00000200 /* Power Management Disable */ 1083 #define TUCR_MR 0x00000400 /* Memory Request mode */ 1084 #define TUCR_NoMB (TUCR_MR*0) /* No Memory Bus request & grant */ 1085 #define TUCR_MBGPIO (TUCR_MR*1) /* Memory Bus request (MBREQ) & */ 1086 /* grant (MBGNT) on GPIO [22:21] */ 1087 #define TUCR_CTB Fld (3, 20) /* Clock Test Bits */ 1088 #define TUCR_FDC 0x00800000 /* RTC Force Delete Count */ 1089 #define TUCR_FMC 0x01000000 /* Force Michelle's Control mode */ 1090 #define TUCR_TMC 0x02000000 /* RTC Trimmer Multiplexer Control */ 1091 #define TUCR_DPS 0x04000000 /* Disallow Pad Sleep */ 1092 #define TUCR_TSEL Fld (3, 29) /* clock Test SELect on GPIO [27] */ 1093 #define TUCR_32_768kHz /* 32.768 kHz osc. on GPIO [27] */ \ 1094 (0 << FShft (TUCR_TSEL)) 1095 #define TUCR_3_6864MHz /* 3.6864 MHz osc. on GPIO [27] */ \ 1096 (1 << FShft (TUCR_TSEL)) 1097 #define TUCR_VDD /* VDD ring osc./16 on GPIO [27] */ \ 1098 (2 << FShft (TUCR_TSEL)) 1099 #define TUCR_96MHzPLL /* 96 MHz PLL/4 on GPIO [27] */ \ 1100 (3 << FShft (TUCR_TSEL)) 1101 #define TUCR_Clock /* internal (fcpu/2) & 32.768 kHz */ \ 1102 /* Clocks on GPIO [26:27] */ \ 1103 (4 << FShft (TUCR_TSEL)) 1104 #define TUCR_3_6864MHzA /* 3.6864 MHz osc. on GPIO [27] */ \ 1105 /* (Alternative) */ \ 1106 (5 << FShft (TUCR_TSEL)) 1107 #define TUCR_MainPLL /* Main PLL/16 on GPIO [27] */ \ 1108 (6 << FShft (TUCR_TSEL)) 1109 #define TUCR_VDDL /* VDDL ring osc./4 on GPIO [27] */ \ 1110 (7 << FShft (TUCR_TSEL)) 1111 1112 1113 /* 1114 * General-Purpose Input/Output (GPIO) control registers 1115 * 1116 * Registers 1117 * GPLR General-Purpose Input/Output (GPIO) Pin Level 1118 * Register (read). 1119 * GPDR General-Purpose Input/Output (GPIO) Pin Direction 1120 * Register (read/write). 1121 * GPSR General-Purpose Input/Output (GPIO) Pin output Set 1122 * Register (write). 1123 * GPCR General-Purpose Input/Output (GPIO) Pin output Clear 1124 * Register (write). 1125 * GRER General-Purpose Input/Output (GPIO) Rising-Edge 1126 * detect Register (read/write). 1127 * GFER General-Purpose Input/Output (GPIO) Falling-Edge 1128 * detect Register (read/write). 1129 * GEDR General-Purpose Input/Output (GPIO) Edge Detect 1130 * status Register (read/write). 1131 * GAFR General-Purpose Input/Output (GPIO) Alternate 1132 * Function Register (read/write). 1133 * 1134 * Clock 1135 * fcpu, Tcpu Frequency, period of the CPU core clock (CCLK). 1136 */ 1137 1138 #define GPLR __REG(0x90040000) /* GPIO Pin Level Reg. */ 1139 #define GPDR __REG(0x90040004) /* GPIO Pin Direction Reg. */ 1140 #define GPSR __REG(0x90040008) /* GPIO Pin output Set Reg. */ 1141 #define GPCR __REG(0x9004000C) /* GPIO Pin output Clear Reg. */ 1142 #define GRER __REG(0x90040010) /* GPIO Rising-Edge detect Reg. */ 1143 #define GFER __REG(0x90040014) /* GPIO Falling-Edge detect Reg. */ 1144 #define GEDR __REG(0x90040018) /* GPIO Edge Detect status Reg. */ 1145 #define GAFR __REG(0x9004001C) /* GPIO Alternate Function Reg. */ 1146 1147 #define GPIO_MIN (0) 1148 #define GPIO_MAX (27) 1149 1150 #define GPIO_GPIO(Nb) /* GPIO [0..27] */ \ 1151 (0x00000001 << (Nb)) 1152 #define GPIO_GPIO0 GPIO_GPIO (0) /* GPIO [0] */ 1153 #define GPIO_GPIO1 GPIO_GPIO (1) /* GPIO [1] */ 1154 #define GPIO_GPIO2 GPIO_GPIO (2) /* GPIO [2] */ 1155 #define GPIO_GPIO3 GPIO_GPIO (3) /* GPIO [3] */ 1156 #define GPIO_GPIO4 GPIO_GPIO (4) /* GPIO [4] */ 1157 #define GPIO_GPIO5 GPIO_GPIO (5) /* GPIO [5] */ 1158 #define GPIO_GPIO6 GPIO_GPIO (6) /* GPIO [6] */ 1159 #define GPIO_GPIO7 GPIO_GPIO (7) /* GPIO [7] */ 1160 #define GPIO_GPIO8 GPIO_GPIO (8) /* GPIO [8] */ 1161 #define GPIO_GPIO9 GPIO_GPIO (9) /* GPIO [9] */ 1162 #define GPIO_GPIO10 GPIO_GPIO (10) /* GPIO [10] */ 1163 #define GPIO_GPIO11 GPIO_GPIO (11) /* GPIO [11] */ 1164 #define GPIO_GPIO12 GPIO_GPIO (12) /* GPIO [12] */ 1165 #define GPIO_GPIO13 GPIO_GPIO (13) /* GPIO [13] */ 1166 #define GPIO_GPIO14 GPIO_GPIO (14) /* GPIO [14] */ 1167 #define GPIO_GPIO15 GPIO_GPIO (15) /* GPIO [15] */ 1168 #define GPIO_GPIO16 GPIO_GPIO (16) /* GPIO [16] */ 1169 #define GPIO_GPIO17 GPIO_GPIO (17) /* GPIO [17] */ 1170 #define GPIO_GPIO18 GPIO_GPIO (18) /* GPIO [18] */ 1171 #define GPIO_GPIO19 GPIO_GPIO (19) /* GPIO [19] */ 1172 #define GPIO_GPIO20 GPIO_GPIO (20) /* GPIO [20] */ 1173 #define GPIO_GPIO21 GPIO_GPIO (21) /* GPIO [21] */ 1174 #define GPIO_GPIO22 GPIO_GPIO (22) /* GPIO [22] */ 1175 #define GPIO_GPIO23 GPIO_GPIO (23) /* GPIO [23] */ 1176 #define GPIO_GPIO24 GPIO_GPIO (24) /* GPIO [24] */ 1177 #define GPIO_GPIO25 GPIO_GPIO (25) /* GPIO [25] */ 1178 #define GPIO_GPIO26 GPIO_GPIO (26) /* GPIO [26] */ 1179 #define GPIO_GPIO27 GPIO_GPIO (27) /* GPIO [27] */ 1180 1181 #define GPIO_LDD(Nb) /* LCD Data [8..15] (O) */ \ 1182 GPIO_GPIO ((Nb) - 6) 1183 #define GPIO_LDD8 GPIO_LDD (8) /* LCD Data [8] (O) */ 1184 #define GPIO_LDD9 GPIO_LDD (9) /* LCD Data [9] (O) */ 1185 #define GPIO_LDD10 GPIO_LDD (10) /* LCD Data [10] (O) */ 1186 #define GPIO_LDD11 GPIO_LDD (11) /* LCD Data [11] (O) */ 1187 #define GPIO_LDD12 GPIO_LDD (12) /* LCD Data [12] (O) */ 1188 #define GPIO_LDD13 GPIO_LDD (13) /* LCD Data [13] (O) */ 1189 #define GPIO_LDD14 GPIO_LDD (14) /* LCD Data [14] (O) */ 1190 #define GPIO_LDD15 GPIO_LDD (15) /* LCD Data [15] (O) */ 1191 /* ser. port 4: */ 1192 #define GPIO_SSP_TXD GPIO_GPIO (10) /* SSP Transmit Data (O) */ 1193 #define GPIO_SSP_RXD GPIO_GPIO (11) /* SSP Receive Data (I) */ 1194 #define GPIO_SSP_SCLK GPIO_GPIO (12) /* SSP Sample CLocK (O) */ 1195 #define GPIO_SSP_SFRM GPIO_GPIO (13) /* SSP Sample FRaMe (O) */ 1196 /* ser. port 1: */ 1197 #define GPIO_UART_TXD GPIO_GPIO (14) /* UART Transmit Data (O) */ 1198 #define GPIO_UART_RXD GPIO_GPIO (15) /* UART Receive Data (I) */ 1199 #define GPIO_SDLC_SCLK GPIO_GPIO (16) /* SDLC Sample CLocK (I/O) */ 1200 #define GPIO_SDLC_AAF GPIO_GPIO (17) /* SDLC Abort After Frame (O) */ 1201 #define GPIO_UART_SCLK1 GPIO_GPIO (18) /* UART Sample CLocK 1 (I) */ 1202 /* ser. port 4: */ 1203 #define GPIO_SSP_CLK GPIO_GPIO (19) /* SSP external CLocK (I) */ 1204 /* ser. port 3: */ 1205 #define GPIO_UART_SCLK3 GPIO_GPIO (20) /* UART Sample CLocK 3 (I) */ 1206 /* ser. port 4: */ 1207 #define GPIO_MCP_CLK GPIO_GPIO (21) /* MCP CLocK (I) */ 1208 /* test controller: */ 1209 #define GPIO_TIC_ACK GPIO_GPIO (21) /* TIC ACKnowledge (O) */ 1210 #define GPIO_MBGNT GPIO_GPIO (21) /* Memory Bus GraNT (O) */ 1211 #define GPIO_TREQA GPIO_GPIO (22) /* TIC REQuest A (I) */ 1212 #define GPIO_MBREQ GPIO_GPIO (22) /* Memory Bus REQuest (I) */ 1213 #define GPIO_TREQB GPIO_GPIO (23) /* TIC REQuest B (I) */ 1214 #define GPIO_1Hz GPIO_GPIO (25) /* 1 Hz clock (O) */ 1215 #define GPIO_RCLK GPIO_GPIO (26) /* internal (R) CLocK (O, fcpu/2) */ 1216 #define GPIO_32_768kHz GPIO_GPIO (27) /* 32.768 kHz clock (O, RTC) */ 1217 1218 #define GPDR_In 0 /* Input */ 1219 #define GPDR_Out 1 /* Output */ 1220 1221 1222 /* 1223 * Interrupt Controller (IC) control registers 1224 * 1225 * Registers 1226 * ICIP Interrupt Controller (IC) Interrupt ReQuest (IRQ) 1227 * Pending register (read). 1228 * ICMR Interrupt Controller (IC) Mask Register (read/write). 1229 * ICLR Interrupt Controller (IC) Level Register (read/write). 1230 * ICCR Interrupt Controller (IC) Control Register 1231 * (read/write). 1232 * [The ICCR register is only implemented in versions 2.0 1233 * (rev. = 8) and higher of the StrongARM SA-1100.] 1234 * ICFP Interrupt Controller (IC) Fast Interrupt reQuest 1235 * (FIQ) Pending register (read). 1236 * ICPR Interrupt Controller (IC) Pending Register (read). 1237 * [The ICPR register is active low (inverted) in 1238 * versions 1.0 (rev. = 1) and 1.1 (rev. = 2) of the 1239 * StrongARM SA-1100, it is active high (non-inverted) in 1240 * versions 2.0 (rev. = 8) and higher.] 1241 */ 1242 1243 #define ICIP __REG(0x90050000) /* IC IRQ Pending reg. */ 1244 #define ICMR __REG(0x90050004) /* IC Mask Reg. */ 1245 #define ICLR __REG(0x90050008) /* IC Level Reg. */ 1246 #define ICCR __REG(0x9005000C) /* IC Control Reg. */ 1247 #define ICFP __REG(0x90050010) /* IC FIQ Pending reg. */ 1248 #define ICPR __REG(0x90050020) /* IC Pending Reg. */ 1249 1250 #define IC_GPIO(Nb) /* GPIO [0..10] */ \ 1251 (0x00000001 << (Nb)) 1252 #define IC_GPIO0 IC_GPIO (0) /* GPIO [0] */ 1253 #define IC_GPIO1 IC_GPIO (1) /* GPIO [1] */ 1254 #define IC_GPIO2 IC_GPIO (2) /* GPIO [2] */ 1255 #define IC_GPIO3 IC_GPIO (3) /* GPIO [3] */ 1256 #define IC_GPIO4 IC_GPIO (4) /* GPIO [4] */ 1257 #define IC_GPIO5 IC_GPIO (5) /* GPIO [5] */ 1258 #define IC_GPIO6 IC_GPIO (6) /* GPIO [6] */ 1259 #define IC_GPIO7 IC_GPIO (7) /* GPIO [7] */ 1260 #define IC_GPIO8 IC_GPIO (8) /* GPIO [8] */ 1261 #define IC_GPIO9 IC_GPIO (9) /* GPIO [9] */ 1262 #define IC_GPIO10 IC_GPIO (10) /* GPIO [10] */ 1263 #define IC_GPIO11_27 0x00000800 /* GPIO [11:27] (ORed) */ 1264 #define IC_LCD 0x00001000 /* LCD controller */ 1265 #define IC_Ser0UDC 0x00002000 /* Ser. port 0 UDC */ 1266 #define IC_Ser1SDLC 0x00004000 /* Ser. port 1 SDLC */ 1267 #define IC_Ser1UART 0x00008000 /* Ser. port 1 UART */ 1268 #define IC_Ser2ICP 0x00010000 /* Ser. port 2 ICP */ 1269 #define IC_Ser3UART 0x00020000 /* Ser. port 3 UART */ 1270 #define IC_Ser4MCP 0x00040000 /* Ser. port 4 MCP */ 1271 #define IC_Ser4SSP 0x00080000 /* Ser. port 4 SSP */ 1272 #define IC_DMA(Nb) /* DMA controller channel [0..5] */ \ 1273 (0x00100000 << (Nb)) 1274 #define IC_DMA0 IC_DMA (0) /* DMA controller channel 0 */ 1275 #define IC_DMA1 IC_DMA (1) /* DMA controller channel 1 */ 1276 #define IC_DMA2 IC_DMA (2) /* DMA controller channel 2 */ 1277 #define IC_DMA3 IC_DMA (3) /* DMA controller channel 3 */ 1278 #define IC_DMA4 IC_DMA (4) /* DMA controller channel 4 */ 1279 #define IC_DMA5 IC_DMA (5) /* DMA controller channel 5 */ 1280 #define IC_OST(Nb) /* OS Timer match [0..3] */ \ 1281 (0x04000000 << (Nb)) 1282 #define IC_OST0 IC_OST (0) /* OS Timer match 0 */ 1283 #define IC_OST1 IC_OST (1) /* OS Timer match 1 */ 1284 #define IC_OST2 IC_OST (2) /* OS Timer match 2 */ 1285 #define IC_OST3 IC_OST (3) /* OS Timer match 3 */ 1286 #define IC_RTC1Hz 0x40000000 /* RTC 1 Hz clock */ 1287 #define IC_RTCAlrm 0x80000000 /* RTC Alarm */ 1288 1289 #define ICLR_IRQ 0 /* Interrupt ReQuest */ 1290 #define ICLR_FIQ 1 /* Fast Interrupt reQuest */ 1291 1292 #define ICCR_DIM 0x00000001 /* Disable Idle-mode interrupt */ 1293 /* Mask */ 1294 #define ICCR_IdleAllInt (ICCR_DIM*0) /* Idle-mode All Interrupt enable */ 1295 /* (ICMR ignored) */ 1296 #define ICCR_IdleMskInt (ICCR_DIM*1) /* Idle-mode non-Masked Interrupt */ 1297 /* enable (ICMR used) */ 1298 1299 1300 /* 1301 * Peripheral Pin Controller (PPC) control registers 1302 * 1303 * Registers 1304 * PPDR Peripheral Pin Controller (PPC) Pin Direction 1305 * Register (read/write). 1306 * PPSR Peripheral Pin Controller (PPC) Pin State Register 1307 * (read/write). 1308 * PPAR Peripheral Pin Controller (PPC) Pin Assignment 1309 * Register (read/write). 1310 * PSDR Peripheral Pin Controller (PPC) Sleep-mode pin 1311 * Direction Register (read/write). 1312 * PPFR Peripheral Pin Controller (PPC) Pin Flag Register 1313 * (read). 1314 */ 1315 1316 #define PPDR __REG(0x90060000) /* PPC Pin Direction Reg. */ 1317 #define PPSR __REG(0x90060004) /* PPC Pin State Reg. */ 1318 #define PPAR __REG(0x90060008) /* PPC Pin Assignment Reg. */ 1319 #define PSDR __REG(0x9006000C) /* PPC Sleep-mode pin Direction Reg. */ 1320 #define PPFR __REG(0x90060010) /* PPC Pin Flag Reg. */ 1321 1322 #define PPC_LDD(Nb) /* LCD Data [0..7] */ \ 1323 (0x00000001 << (Nb)) 1324 #define PPC_LDD0 PPC_LDD (0) /* LCD Data [0] */ 1325 #define PPC_LDD1 PPC_LDD (1) /* LCD Data [1] */ 1326 #define PPC_LDD2 PPC_LDD (2) /* LCD Data [2] */ 1327 #define PPC_LDD3 PPC_LDD (3) /* LCD Data [3] */ 1328 #define PPC_LDD4 PPC_LDD (4) /* LCD Data [4] */ 1329 #define PPC_LDD5 PPC_LDD (5) /* LCD Data [5] */ 1330 #define PPC_LDD6 PPC_LDD (6) /* LCD Data [6] */ 1331 #define PPC_LDD7 PPC_LDD (7) /* LCD Data [7] */ 1332 #define PPC_L_PCLK 0x00000100 /* LCD Pixel CLocK */ 1333 #define PPC_L_LCLK 0x00000200 /* LCD Line CLocK */ 1334 #define PPC_L_FCLK 0x00000400 /* LCD Frame CLocK */ 1335 #define PPC_L_BIAS 0x00000800 /* LCD AC BIAS */ 1336 /* ser. port 1: */ 1337 #define PPC_TXD1 0x00001000 /* SDLC/UART Transmit Data 1 */ 1338 #define PPC_RXD1 0x00002000 /* SDLC/UART Receive Data 1 */ 1339 /* ser. port 2: */ 1340 #define PPC_TXD2 0x00004000 /* IPC Transmit Data 2 */ 1341 #define PPC_RXD2 0x00008000 /* IPC Receive Data 2 */ 1342 /* ser. port 3: */ 1343 #define PPC_TXD3 0x00010000 /* UART Transmit Data 3 */ 1344 #define PPC_RXD3 0x00020000 /* UART Receive Data 3 */ 1345 /* ser. port 4: */ 1346 #define PPC_TXD4 0x00040000 /* MCP/SSP Transmit Data 4 */ 1347 #define PPC_RXD4 0x00080000 /* MCP/SSP Receive Data 4 */ 1348 #define PPC_SCLK 0x00100000 /* MCP/SSP Sample CLocK */ 1349 #define PPC_SFRM 0x00200000 /* MCP/SSP Sample FRaMe */ 1350 1351 #define PPDR_In 0 /* Input */ 1352 #define PPDR_Out 1 /* Output */ 1353 1354 /* ser. port 1: */ 1355 #define PPAR_UPR 0x00001000 /* UART Pin Reassignment */ 1356 #define PPAR_UARTTR (PPAR_UPR*0) /* UART on TXD_1 & RXD_1 */ 1357 #define PPAR_UARTGPIO (PPAR_UPR*1) /* UART on GPIO [14:15] */ 1358 /* ser. port 4: */ 1359 #define PPAR_SPR 0x00040000 /* SSP Pin Reassignment */ 1360 #define PPAR_SSPTRSS (PPAR_SPR*0) /* SSP on TXD_C, RXD_C, SCLK_C, */ 1361 /* & SFRM_C */ 1362 #define PPAR_SSPGPIO (PPAR_SPR*1) /* SSP on GPIO [10:13] */ 1363 1364 #define PSDR_OutL 0 /* Output Low in sleep mode */ 1365 #define PSDR_Flt 1 /* Floating (input) in sleep mode */ 1366 1367 #define PPFR_LCD 0x00000001 /* LCD controller */ 1368 #define PPFR_SP1TX 0x00001000 /* Ser. Port 1 SDLC/UART Transmit */ 1369 #define PPFR_SP1RX 0x00002000 /* Ser. Port 1 SDLC/UART Receive */ 1370 #define PPFR_SP2TX 0x00004000 /* Ser. Port 2 ICP Transmit */ 1371 #define PPFR_SP2RX 0x00008000 /* Ser. Port 2 ICP Receive */ 1372 #define PPFR_SP3TX 0x00010000 /* Ser. Port 3 UART Transmit */ 1373 #define PPFR_SP3RX 0x00020000 /* Ser. Port 3 UART Receive */ 1374 #define PPFR_SP4 0x00040000 /* Ser. Port 4 MCP/SSP */ 1375 #define PPFR_PerEn 0 /* Peripheral Enabled */ 1376 #define PPFR_PPCEn 1 /* PPC Enabled */ 1377 1378 1379 /* 1380 * Dynamic Random-Access Memory (DRAM) control registers 1381 * 1382 * Registers 1383 * MDCNFG Memory system: Dynamic Random-Access Memory (DRAM) 1384 * CoNFiGuration register (read/write). 1385 * MDCAS0 Memory system: Dynamic Random-Access Memory (DRAM) 1386 * Column Address Strobe (CAS) shift register 0 1387 * (read/write). 1388 * MDCAS1 Memory system: Dynamic Random-Access Memory (DRAM) 1389 * Column Address Strobe (CAS) shift register 1 1390 * (read/write). 1391 * MDCAS2 Memory system: Dynamic Random-Access Memory (DRAM) 1392 * Column Address Strobe (CAS) shift register 2 1393 * (read/write). 1394 * 1395 * Clocks 1396 * fcpu, Tcpu Frequency, period of the CPU core clock (CCLK). 1397 * fmem, Tmem Frequency, period of the memory clock (fmem = fcpu/2). 1398 * fcas, Tcas Frequency, period of the DRAM CAS shift registers. 1399 */ 1400 1401 #define MDCNFG __REG(0xA0000000) /* DRAM CoNFiGuration reg. */ 1402 #define MDCAS0 __REG(0xA0000004) /* DRAM CAS shift reg. 0 */ 1403 #define MDCAS1 __REG(0xA0000008) /* DRAM CAS shift reg. 1 */ 1404 #define MDCAS2 __REG(0xA000000c) /* DRAM CAS shift reg. 2 */ 1405 1406 /* SA1100 MDCNFG values */ 1407 #define MDCNFG_DE(Nb) /* DRAM Enable bank [0..3] */ \ 1408 (0x00000001 << (Nb)) 1409 #define MDCNFG_DE0 MDCNFG_DE (0) /* DRAM Enable bank 0 */ 1410 #define MDCNFG_DE1 MDCNFG_DE (1) /* DRAM Enable bank 1 */ 1411 #define MDCNFG_DE2 MDCNFG_DE (2) /* DRAM Enable bank 2 */ 1412 #define MDCNFG_DE3 MDCNFG_DE (3) /* DRAM Enable bank 3 */ 1413 #define MDCNFG_DRAC Fld (2, 4) /* DRAM Row Address Count - 9 */ 1414 #define MDCNFG_RowAdd(Add) /* Row Address count [9..12] */ \ 1415 (((Add) - 9) << FShft (MDCNFG_DRAC)) 1416 #define MDCNFG_CDB2 0x00000040 /* shift reg. Clock Divide By 2 */ 1417 /* (fcas = fcpu/2) */ 1418 #define MDCNFG_TRP Fld (4, 7) /* Time RAS Pre-charge - 1 [Tmem] */ 1419 #define MDCNFG_PrChrg(Tcpu) /* Pre-Charge time [2..32 Tcpu] */ \ 1420 (((Tcpu) - 2)/2 << FShft (MDCNFG_TRP)) 1421 #define MDCNFG_CeilPrChrg(Tcpu) /* Ceil. of PrChrg [2..32 Tcpu] */ \ 1422 (((Tcpu) - 1)/2 << FShft (MDCNFG_TRP)) 1423 #define MDCNFG_TRASR Fld (4, 11) /* Time RAS Refresh - 1 [Tmem] */ 1424 #define MDCNFG_Ref(Tcpu) /* Refresh time [2..32 Tcpu] */ \ 1425 (((Tcpu) - 2)/2 << FShft (MDCNFG_TRASR)) 1426 #define MDCNFG_CeilRef(Tcpu) /* Ceil. of Ref [2..32 Tcpu] */ \ 1427 (((Tcpu) - 1)/2 << FShft (MDCNFG_TRASR)) 1428 #define MDCNFG_TDL Fld (2, 15) /* Time Data Latch [Tcpu] */ 1429 #define MDCNFG_DataLtch(Tcpu) /* Data Latch delay [0..3 Tcpu] */ \ 1430 ((Tcpu) << FShft (MDCNFG_TDL)) 1431 #define MDCNFG_DRI Fld (15, 17) /* min. DRAM Refresh Interval/4 */ 1432 /* [Tmem] */ 1433 #define MDCNFG_RefInt(Tcpu) /* min. Refresh Interval */ \ 1434 /* [0..262136 Tcpu] */ \ 1435 ((Tcpu)/8 << FShft (MDCNFG_DRI)) 1436 1437 /* SA1110 MDCNFG values */ 1438 #define MDCNFG_SA1110_DE0 0x00000001 /* DRAM Enable bank 0 */ 1439 #define MDCNFG_SA1110_DE1 0x00000002 /* DRAM Enable bank 1 */ 1440 #define MDCNFG_SA1110_DTIM0 0x00000004 /* DRAM timing type 0/1 */ 1441 #define MDCNFG_SA1110_DWID0 0x00000008 /* DRAM bus width 0/1 */ 1442 #define MDCNFG_SA1110_DRAC0 Fld(3, 4) /* DRAM row addr bit count */ 1443 /* bank 0/1 */ 1444 #define MDCNFG_SA1110_CDB20 0x00000080 /* Mem Clock divide by 2 0/1 */ 1445 #define MDCNFG_SA1110_TRP0 Fld(3, 8) /* RAS precharge 0/1 */ 1446 #define MDCNFG_SA1110_TDL0 Fld(2, 12) /* Data input latch after CAS*/ 1447 /* deassertion 0/1 */ 1448 #define MDCNFG_SA1110_TWR0 Fld(2, 14) /* SDRAM write recovery 0/1 */ 1449 #define MDCNFG_SA1110_DE2 0x00010000 /* DRAM Enable bank 0 */ 1450 #define MDCNFG_SA1110_DE3 0x00020000 /* DRAM Enable bank 1 */ 1451 #define MDCNFG_SA1110_DTIM2 0x00040000 /* DRAM timing type 0/1 */ 1452 #define MDCNFG_SA1110_DWID2 0x00080000 /* DRAM bus width 0/1 */ 1453 #define MDCNFG_SA1110_DRAC2 Fld(3, 20) /* DRAM row addr bit count */ 1454 /* bank 0/1 */ 1455 #define MDCNFG_SA1110_CDB22 0x00800000 /* Mem Clock divide by 2 0/1 */ 1456 #define MDCNFG_SA1110_TRP2 Fld(3, 24) /* RAS precharge 0/1 */ 1457 #define MDCNFG_SA1110_TDL2 Fld(2, 28) /* Data input latch after CAS*/ 1458 /* deassertion 0/1 */ 1459 #define MDCNFG_SA1110_TWR2 Fld(2, 30) /* SDRAM write recovery 0/1 */ 1460 1461 1462 /* 1463 * Static memory control registers 1464 * 1465 * Registers 1466 * MSC0 Memory system: Static memory Control register 0 1467 * (read/write). 1468 * MSC1 Memory system: Static memory Control register 1 1469 * (read/write). 1470 * 1471 * Clocks 1472 * fcpu, Tcpu Frequency, period of the CPU core clock (CCLK). 1473 * fmem, Tmem Frequency, period of the memory clock (fmem = fcpu/2). 1474 */ 1475 1476 #define MSC0 __REG(0xa0000010) /* Static memory Control reg. 0 */ 1477 #define MSC1 __REG(0xa0000014) /* Static memory Control reg. 1 */ 1478 #define MSC2 __REG(0xa000002c) /* Static memory Control reg. 2, not contiguous */ 1479 1480 #define MSC_Bnk(Nb) /* static memory Bank [0..3] */ \ 1481 Fld (16, ((Nb) Modulo 2)*16) 1482 #define MSC0_Bnk0 MSC_Bnk (0) /* static memory Bank 0 */ 1483 #define MSC0_Bnk1 MSC_Bnk (1) /* static memory Bank 1 */ 1484 #define MSC1_Bnk2 MSC_Bnk (2) /* static memory Bank 2 */ 1485 #define MSC1_Bnk3 MSC_Bnk (3) /* static memory Bank 3 */ 1486 1487 #define MSC_RT Fld (2, 0) /* ROM/static memory Type */ 1488 #define MSC_NonBrst /* Non-Burst static memory */ \ 1489 (0 << FShft (MSC_RT)) 1490 #define MSC_SRAM /* 32-bit byte-writable SRAM */ \ 1491 (1 << FShft (MSC_RT)) 1492 #define MSC_Brst4 /* Burst-of-4 static memory */ \ 1493 (2 << FShft (MSC_RT)) 1494 #define MSC_Brst8 /* Burst-of-8 static memory */ \ 1495 (3 << FShft (MSC_RT)) 1496 #define MSC_RBW 0x0004 /* ROM/static memory Bus Width */ 1497 #define MSC_32BitStMem (MSC_RBW*0) /* 32-Bit Static Memory */ 1498 #define MSC_16BitStMem (MSC_RBW*1) /* 16-Bit Static Memory */ 1499 #define MSC_RDF Fld (5, 3) /* ROM/static memory read Delay */ 1500 /* First access - 1(.5) [Tmem] */ 1501 #define MSC_1stRdAcc(Tcpu) /* 1st Read Access time (burst */ \ 1502 /* static memory) [3..65 Tcpu] */ \ 1503 ((((Tcpu) - 3)/2) << FShft (MSC_RDF)) 1504 #define MSC_Ceil1stRdAcc(Tcpu) /* Ceil. of 1stRdAcc [3..65 Tcpu] */ \ 1505 ((((Tcpu) - 2)/2) << FShft (MSC_RDF)) 1506 #define MSC_RdAcc(Tcpu) /* Read Access time (non-burst */ \ 1507 /* static memory) [2..64 Tcpu] */ \ 1508 ((((Tcpu) - 2)/2) << FShft (MSC_RDF)) 1509 #define MSC_CeilRdAcc(Tcpu) /* Ceil. of RdAcc [2..64 Tcpu] */ \ 1510 ((((Tcpu) - 1)/2) << FShft (MSC_RDF)) 1511 #define MSC_RDN Fld (5, 8) /* ROM/static memory read Delay */ 1512 /* Next access - 1 [Tmem] */ 1513 #define MSC_NxtRdAcc(Tcpu) /* Next Read Access time (burst */ \ 1514 /* static memory) [2..64 Tcpu] */ \ 1515 ((((Tcpu) - 2)/2) << FShft (MSC_RDN)) 1516 #define MSC_CeilNxtRdAcc(Tcpu) /* Ceil. of NxtRdAcc [2..64 Tcpu] */ \ 1517 ((((Tcpu) - 1)/2) << FShft (MSC_RDN)) 1518 #define MSC_WrAcc(Tcpu) /* Write Access time (non-burst */ \ 1519 /* static memory) [2..64 Tcpu] */ \ 1520 ((((Tcpu) - 2)/2) << FShft (MSC_RDN)) 1521 #define MSC_CeilWrAcc(Tcpu) /* Ceil. of WrAcc [2..64 Tcpu] */ \ 1522 ((((Tcpu) - 1)/2) << FShft (MSC_RDN)) 1523 #define MSC_RRR Fld (3, 13) /* ROM/static memory RecoveRy */ 1524 /* time/2 [Tmem] */ 1525 #define MSC_Rec(Tcpu) /* Recovery time [0..28 Tcpu] */ \ 1526 (((Tcpu)/4) << FShft (MSC_RRR)) 1527 #define MSC_CeilRec(Tcpu) /* Ceil. of Rec [0..28 Tcpu] */ \ 1528 ((((Tcpu) + 3)/4) << FShft (MSC_RRR)) 1529 1530 1531 /* 1532 * Personal Computer Memory Card International Association (PCMCIA) control 1533 * register 1534 * 1535 * Register 1536 * MECR Memory system: Expansion memory bus (PCMCIA) 1537 * Configuration Register (read/write). 1538 * 1539 * Clocks 1540 * fcpu, Tcpu Frequency, period of the CPU core clock (CCLK). 1541 * fmem, Tmem Frequency, period of the memory clock (fmem = fcpu/2). 1542 * fbclk, Tbclk Frequency, period of the PCMCIA clock (BCLK). 1543 */ 1544 1545 /* Memory system: */ 1546 #define MECR __REG(0xA0000018) /* Expansion memory bus (PCMCIA) Configuration Reg. */ 1547 1548 #define MECR_PCMCIA(Nb) /* PCMCIA [0..1] */ \ 1549 Fld (15, (Nb)*16) 1550 #define MECR_PCMCIA0 MECR_PCMCIA (0) /* PCMCIA 0 */ 1551 #define MECR_PCMCIA1 MECR_PCMCIA (1) /* PCMCIA 1 */ 1552 1553 #define MECR_BSIO Fld (5, 0) /* BCLK Select I/O - 1 [Tmem] */ 1554 #define MECR_IOClk(Tcpu) /* I/O Clock [2..64 Tcpu] */ \ 1555 ((((Tcpu) - 2)/2) << FShft (MECR_BSIO)) 1556 #define MECR_CeilIOClk(Tcpu) /* Ceil. of IOClk [2..64 Tcpu] */ \ 1557 ((((Tcpu) - 1)/2) << FShft (MECR_BSIO)) 1558 #define MECR_BSA Fld (5, 5) /* BCLK Select Attribute - 1 */ 1559 /* [Tmem] */ 1560 #define MECR_AttrClk(Tcpu) /* Attribute Clock [2..64 Tcpu] */ \ 1561 ((((Tcpu) - 2)/2) << FShft (MECR_BSA)) 1562 #define MECR_CeilAttrClk(Tcpu) /* Ceil. of AttrClk [2..64 Tcpu] */ \ 1563 ((((Tcpu) - 1)/2) << FShft (MECR_BSA)) 1564 #define MECR_BSM Fld (5, 10) /* BCLK Select Memory - 1 [Tmem] */ 1565 #define MECR_MemClk(Tcpu) /* Memory Clock [2..64 Tcpu] */ \ 1566 ((((Tcpu) - 2)/2) << FShft (MECR_BSM)) 1567 #define MECR_CeilMemClk(Tcpu) /* Ceil. of MemClk [2..64 Tcpu] */ \ 1568 ((((Tcpu) - 1)/2) << FShft (MECR_BSM)) 1569 1570 /* 1571 * On SA1110 only 1572 */ 1573 1574 #define MDREFR __REG(0xA000001C) 1575 1576 #define MDREFR_TRASR Fld (4, 0) 1577 #define MDREFR_DRI Fld (12, 4) 1578 #define MDREFR_E0PIN (1 << 16) 1579 #define MDREFR_K0RUN (1 << 17) 1580 #define MDREFR_K0DB2 (1 << 18) 1581 #define MDREFR_E1PIN (1 << 20) 1582 #define MDREFR_K1RUN (1 << 21) 1583 #define MDREFR_K1DB2 (1 << 22) 1584 #define MDREFR_K2RUN (1 << 25) 1585 #define MDREFR_K2DB2 (1 << 26) 1586 #define MDREFR_EAPD (1 << 28) 1587 #define MDREFR_KAPD (1 << 29) 1588 #define MDREFR_SLFRSH (1 << 31) 1589 1590 1591 /* 1592 * Direct Memory Access (DMA) control registers 1593 */ 1594 #define DMA_SIZE (6 * 0x20) 1595 #define DMA_PHYS 0xb0000000 1596 1597 1598 /* 1599 * Liquid Crystal Display (LCD) control registers 1600 * 1601 * Registers 1602 * LCCR0 Liquid Crystal Display (LCD) Control Register 0 1603 * (read/write). 1604 * [Bits LDM, BAM, and ERM are only implemented in 1605 * versions 2.0 (rev. = 8) and higher of the StrongARM 1606 * SA-1100.] 1607 * LCSR Liquid Crystal Display (LCD) Status Register 1608 * (read/write). 1609 * [Bit LDD can be only read in versions 1.0 (rev. = 1) 1610 * and 1.1 (rev. = 2) of the StrongARM SA-1100, it can be 1611 * read and written (cleared) in versions 2.0 (rev. = 8) 1612 * and higher.] 1613 * DBAR1 Liquid Crystal Display (LCD) Direct Memory Access 1614 * (DMA) Base Address Register channel 1 (read/write). 1615 * DCAR1 Liquid Crystal Display (LCD) Direct Memory Access 1616 * (DMA) Current Address Register channel 1 (read). 1617 * DBAR2 Liquid Crystal Display (LCD) Direct Memory Access 1618 * (DMA) Base Address Register channel 2 (read/write). 1619 * DCAR2 Liquid Crystal Display (LCD) Direct Memory Access 1620 * (DMA) Current Address Register channel 2 (read). 1621 * LCCR1 Liquid Crystal Display (LCD) Control Register 1 1622 * (read/write). 1623 * [The LCCR1 register can be only written in 1624 * versions 1.0 (rev. = 1) and 1.1 (rev. = 2) of the 1625 * StrongARM SA-1100, it can be written and read in 1626 * versions 2.0 (rev. = 8) and higher.] 1627 * LCCR2 Liquid Crystal Display (LCD) Control Register 2 1628 * (read/write). 1629 * [The LCCR1 register can be only written in 1630 * versions 1.0 (rev. = 1) and 1.1 (rev. = 2) of the 1631 * StrongARM SA-1100, it can be written and read in 1632 * versions 2.0 (rev. = 8) and higher.] 1633 * LCCR3 Liquid Crystal Display (LCD) Control Register 3 1634 * (read/write). 1635 * [The LCCR1 register can be only written in 1636 * versions 1.0 (rev. = 1) and 1.1 (rev. = 2) of the 1637 * StrongARM SA-1100, it can be written and read in 1638 * versions 2.0 (rev. = 8) and higher. Bit PCP is only 1639 * implemented in versions 2.0 (rev. = 8) and higher of 1640 * the StrongARM SA-1100.] 1641 * 1642 * Clocks 1643 * fcpu, Tcpu Frequency, period of the CPU core clock (CCLK). 1644 * fmem, Tmem Frequency, period of the memory clock (fmem = fcpu/2). 1645 * fpix, Tpix Frequency, period of the pixel clock. 1646 * fln, Tln Frequency, period of the line clock. 1647 * fac, Tac Frequency, period of the AC bias clock. 1648 */ 1649 1650 #define LCD_PEntrySp 2 /* LCD Palette Entry Space [byte] */ 1651 #define LCD_4BitPSp /* LCD 4-Bit pixel Palette Space */ \ 1652 /* [byte] */ \ 1653 (16*LCD_PEntrySp) 1654 #define LCD_8BitPSp /* LCD 8-Bit pixel Palette Space */ \ 1655 /* [byte] */ \ 1656 (256*LCD_PEntrySp) 1657 #define LCD_12_16BitPSp /* LCD 12/16-Bit pixel */ \ 1658 /* dummy-Palette Space [byte] */ \ 1659 (16*LCD_PEntrySp) 1660 1661 #define LCD_PGrey Fld (4, 0) /* LCD Palette entry Grey value */ 1662 #define LCD_PBlue Fld (4, 0) /* LCD Palette entry Blue value */ 1663 #define LCD_PGreen Fld (4, 4) /* LCD Palette entry Green value */ 1664 #define LCD_PRed Fld (4, 8) /* LCD Palette entry Red value */ 1665 #define LCD_PBS Fld (2, 12) /* LCD Pixel Bit Size */ 1666 #define LCD_4Bit /* LCD 4-Bit pixel mode */ \ 1667 (0 << FShft (LCD_PBS)) 1668 #define LCD_8Bit /* LCD 8-Bit pixel mode */ \ 1669 (1 << FShft (LCD_PBS)) 1670 #define LCD_12_16Bit /* LCD 12/16-Bit pixel mode */ \ 1671 (2 << FShft (LCD_PBS)) 1672 1673 #define LCD_Int0_0 0x0 /* LCD Intensity = 0.0% = 0 */ 1674 #define LCD_Int11_1 0x1 /* LCD Intensity = 11.1% = 1/9 */ 1675 #define LCD_Int20_0 0x2 /* LCD Intensity = 20.0% = 1/5 */ 1676 #define LCD_Int26_7 0x3 /* LCD Intensity = 26.7% = 4/15 */ 1677 #define LCD_Int33_3 0x4 /* LCD Intensity = 33.3% = 3/9 */ 1678 #define LCD_Int40_0 0x5 /* LCD Intensity = 40.0% = 2/5 */ 1679 #define LCD_Int44_4 0x6 /* LCD Intensity = 44.4% = 4/9 */ 1680 #define LCD_Int50_0 0x7 /* LCD Intensity = 50.0% = 1/2 */ 1681 #define LCD_Int55_6 0x8 /* LCD Intensity = 55.6% = 5/9 */ 1682 #define LCD_Int60_0 0x9 /* LCD Intensity = 60.0% = 3/5 */ 1683 #define LCD_Int66_7 0xA /* LCD Intensity = 66.7% = 6/9 */ 1684 #define LCD_Int73_3 0xB /* LCD Intensity = 73.3% = 11/15 */ 1685 #define LCD_Int80_0 0xC /* LCD Intensity = 80.0% = 4/5 */ 1686 #define LCD_Int88_9 0xD /* LCD Intensity = 88.9% = 8/9 */ 1687 #define LCD_Int100_0 0xE /* LCD Intensity = 100.0% = 1 */ 1688 #define LCD_Int100_0A 0xF /* LCD Intensity = 100.0% = 1 */ 1689 /* (Alternative) */ 1690 1691 #define LCCR0_LEN 0x00000001 /* LCD ENable */ 1692 #define LCCR0_CMS 0x00000002 /* Color/Monochrome display Select */ 1693 #define LCCR0_Color (LCCR0_CMS*0) /* Color display */ 1694 #define LCCR0_Mono (LCCR0_CMS*1) /* Monochrome display */ 1695 #define LCCR0_SDS 0x00000004 /* Single/Dual panel display */ 1696 /* Select */ 1697 #define LCCR0_Sngl (LCCR0_SDS*0) /* Single panel display */ 1698 #define LCCR0_Dual (LCCR0_SDS*1) /* Dual panel display */ 1699 #define LCCR0_LDM 0x00000008 /* LCD Disable done (LDD) */ 1700 /* interrupt Mask (disable) */ 1701 #define LCCR0_BAM 0x00000010 /* Base Address update (BAU) */ 1702 /* interrupt Mask (disable) */ 1703 #define LCCR0_ERM 0x00000020 /* LCD ERror (BER, IOL, IUL, IOU, */ 1704 /* IUU, OOL, OUL, OOU, and OUU) */ 1705 /* interrupt Mask (disable) */ 1706 #define LCCR0_PAS 0x00000080 /* Passive/Active display Select */ 1707 #define LCCR0_Pas (LCCR0_PAS*0) /* Passive display (STN) */ 1708 #define LCCR0_Act (LCCR0_PAS*1) /* Active display (TFT) */ 1709 #define LCCR0_BLE 0x00000100 /* Big/Little Endian select */ 1710 #define LCCR0_LtlEnd (LCCR0_BLE*0) /* Little Endian frame buffer */ 1711 #define LCCR0_BigEnd (LCCR0_BLE*1) /* Big Endian frame buffer */ 1712 #define LCCR0_DPD 0x00000200 /* Double Pixel Data (monochrome */ 1713 /* display mode) */ 1714 #define LCCR0_4PixMono (LCCR0_DPD*0) /* 4-Pixel/clock Monochrome */ 1715 /* display */ 1716 #define LCCR0_8PixMono (LCCR0_DPD*1) /* 8-Pixel/clock Monochrome */ 1717 /* display */ 1718 #define LCCR0_PDD Fld (8, 12) /* Palette DMA request Delay */ 1719 /* [Tmem] */ 1720 #define LCCR0_DMADel(Tcpu) /* palette DMA request Delay */ \ 1721 /* [0..510 Tcpu] */ \ 1722 ((Tcpu)/2 << FShft (LCCR0_PDD)) 1723 1724 #define LCSR_LDD 0x00000001 /* LCD Disable Done */ 1725 #define LCSR_BAU 0x00000002 /* Base Address Update (read) */ 1726 #define LCSR_BER 0x00000004 /* Bus ERror */ 1727 #define LCSR_ABC 0x00000008 /* AC Bias clock Count */ 1728 #define LCSR_IOL 0x00000010 /* Input FIFO Over-run Lower */ 1729 /* panel */ 1730 #define LCSR_IUL 0x00000020 /* Input FIFO Under-run Lower */ 1731 /* panel */ 1732 #define LCSR_IOU 0x00000040 /* Input FIFO Over-run Upper */ 1733 /* panel */ 1734 #define LCSR_IUU 0x00000080 /* Input FIFO Under-run Upper */ 1735 /* panel */ 1736 #define LCSR_OOL 0x00000100 /* Output FIFO Over-run Lower */ 1737 /* panel */ 1738 #define LCSR_OUL 0x00000200 /* Output FIFO Under-run Lower */ 1739 /* panel */ 1740 #define LCSR_OOU 0x00000400 /* Output FIFO Over-run Upper */ 1741 /* panel */ 1742 #define LCSR_OUU 0x00000800 /* Output FIFO Under-run Upper */ 1743 /* panel */ 1744 1745 #define LCCR1_PPL Fld (6, 4) /* Pixels Per Line/16 - 1 */ 1746 #define LCCR1_DisWdth(Pixel) /* Display Width [16..1024 pix.] */ \ 1747 (((Pixel) - 16)/16 << FShft (LCCR1_PPL)) 1748 #define LCCR1_HSW Fld (6, 10) /* Horizontal Synchronization */ 1749 /* pulse Width - 1 [Tpix] (L_LCLK) */ 1750 #define LCCR1_HorSnchWdth(Tpix) /* Horizontal Synchronization */ \ 1751 /* pulse Width [1..64 Tpix] */ \ 1752 (((Tpix) - 1) << FShft (LCCR1_HSW)) 1753 #define LCCR1_ELW Fld (8, 16) /* End-of-Line pixel clock Wait */ 1754 /* count - 1 [Tpix] */ 1755 #define LCCR1_EndLnDel(Tpix) /* End-of-Line Delay */ \ 1756 /* [1..256 Tpix] */ \ 1757 (((Tpix) - 1) << FShft (LCCR1_ELW)) 1758 #define LCCR1_BLW Fld (8, 24) /* Beginning-of-Line pixel clock */ 1759 /* Wait count - 1 [Tpix] */ 1760 #define LCCR1_BegLnDel(Tpix) /* Beginning-of-Line Delay */ \ 1761 /* [1..256 Tpix] */ \ 1762 (((Tpix) - 1) << FShft (LCCR1_BLW)) 1763 1764 #define LCCR2_LPP Fld (10, 0) /* Line Per Panel - 1 */ 1765 #define LCCR2_DisHght(Line) /* Display Height [1..1024 lines] */ \ 1766 (((Line) - 1) << FShft (LCCR2_LPP)) 1767 #define LCCR2_VSW Fld (6, 10) /* Vertical Synchronization pulse */ 1768 /* Width - 1 [Tln] (L_FCLK) */ 1769 #define LCCR2_VrtSnchWdth(Tln) /* Vertical Synchronization pulse */ \ 1770 /* Width [1..64 Tln] */ \ 1771 (((Tln) - 1) << FShft (LCCR2_VSW)) 1772 #define LCCR2_EFW Fld (8, 16) /* End-of-Frame line clock Wait */ 1773 /* count [Tln] */ 1774 #define LCCR2_EndFrmDel(Tln) /* End-of-Frame Delay */ \ 1775 /* [0..255 Tln] */ \ 1776 ((Tln) << FShft (LCCR2_EFW)) 1777 #define LCCR2_BFW Fld (8, 24) /* Beginning-of-Frame line clock */ 1778 /* Wait count [Tln] */ 1779 #define LCCR2_BegFrmDel(Tln) /* Beginning-of-Frame Delay */ \ 1780 /* [0..255 Tln] */ \ 1781 ((Tln) << FShft (LCCR2_BFW)) 1782 1783 #define LCCR3_PCD Fld (8, 0) /* Pixel Clock Divisor/2 - 2 */ 1784 /* [1..255] (L_PCLK) */ 1785 /* fpix = fcpu/(2*(PCD + 2)) */ 1786 /* Tpix = 2*(PCD + 2)*Tcpu */ 1787 #define LCCR3_PixClkDiv(Div) /* Pixel Clock Divisor [6..514] */ \ 1788 (((Div) - 4)/2 << FShft (LCCR3_PCD)) 1789 /* fpix = fcpu/(2*Floor (Div/2)) */ 1790 /* Tpix = 2*Floor (Div/2)*Tcpu */ 1791 #define LCCR3_CeilPixClkDiv(Div) /* Ceil. of PixClkDiv [6..514] */ \ 1792 (((Div) - 3)/2 << FShft (LCCR3_PCD)) 1793 /* fpix = fcpu/(2*Ceil (Div/2)) */ 1794 /* Tpix = 2*Ceil (Div/2)*Tcpu */ 1795 #define LCCR3_ACB Fld (8, 8) /* AC Bias clock half period - 1 */ 1796 /* [Tln] (L_BIAS) */ 1797 #define LCCR3_ACBsDiv(Div) /* AC Bias clock Divisor [2..512] */ \ 1798 (((Div) - 2)/2 << FShft (LCCR3_ACB)) 1799 /* fac = fln/(2*Floor (Div/2)) */ 1800 /* Tac = 2*Floor (Div/2)*Tln */ 1801 #define LCCR3_CeilACBsDiv(Div) /* Ceil. of ACBsDiv [2..512] */ \ 1802 (((Div) - 1)/2 << FShft (LCCR3_ACB)) 1803 /* fac = fln/(2*Ceil (Div/2)) */ 1804 /* Tac = 2*Ceil (Div/2)*Tln */ 1805 #define LCCR3_API Fld (4, 16) /* AC bias Pin transitions per */ 1806 /* Interrupt */ 1807 #define LCCR3_ACBsCntOff /* AC Bias clock transition Count */ \ 1808 /* Off */ \ 1809 (0 << FShft (LCCR3_API)) 1810 #define LCCR3_ACBsCnt(Trans) /* AC Bias clock transition Count */ \ 1811 /* [1..15] */ \ 1812 ((Trans) << FShft (LCCR3_API)) 1813 #define LCCR3_VSP 0x00100000 /* Vertical Synchronization pulse */ 1814 /* Polarity (L_FCLK) */ 1815 #define LCCR3_VrtSnchH (LCCR3_VSP*0) /* Vertical Synchronization pulse */ 1816 /* active High */ 1817 #define LCCR3_VrtSnchL (LCCR3_VSP*1) /* Vertical Synchronization pulse */ 1818 /* active Low */ 1819 #define LCCR3_HSP 0x00200000 /* Horizontal Synchronization */ 1820 /* pulse Polarity (L_LCLK) */ 1821 #define LCCR3_HorSnchH (LCCR3_HSP*0) /* Horizontal Synchronization */ 1822 /* pulse active High */ 1823 #define LCCR3_HorSnchL (LCCR3_HSP*1) /* Horizontal Synchronization */ 1824 /* pulse active Low */ 1825 #define LCCR3_PCP 0x00400000 /* Pixel Clock Polarity (L_PCLK) */ 1826 #define LCCR3_PixRsEdg (LCCR3_PCP*0) /* Pixel clock Rising-Edge */ 1827 #define LCCR3_PixFlEdg (LCCR3_PCP*1) /* Pixel clock Falling-Edge */ 1828 #define LCCR3_OEP 0x00800000 /* Output Enable Polarity (L_BIAS, */ 1829 /* active display mode) */ 1830 #define LCCR3_OutEnH (LCCR3_OEP*0) /* Output Enable active High */ 1831 #define LCCR3_OutEnL (LCCR3_OEP*1) /* Output Enable active Low */ 1832