• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1 /*
2  * Copyright (c) 2010 Broadcom Corporation
3  * Copyright (c) 2013 Hauke Mehrtens <hauke@hauke-m.de>
4  *
5  * Permission to use, copy, modify, and/or distribute this software for any
6  * purpose with or without fee is hereby granted, provided that the above
7  * copyright notice and this permission notice appear in all copies.
8  *
9  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
10  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
11  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
12  * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
13  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
14  * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
15  * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
16  */
17 
18 #define __UNDEF_NO_VERSION__
19 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
20 
21 #include <linux/etherdevice.h>
22 #include <linux/sched.h>
23 #include <linux/firmware.h>
24 #include <linux/interrupt.h>
25 #include <linux/module.h>
26 #include <linux/bcma/bcma.h>
27 #include <net/mac80211.h>
28 #include <defs.h>
29 #include "phy/phy_int.h"
30 #include "d11.h"
31 #include "channel.h"
32 #include "scb.h"
33 #include "pub.h"
34 #include "ucode_loader.h"
35 #include "mac80211_if.h"
36 #include "main.h"
37 #include "debug.h"
38 #include "led.h"
39 
40 #define N_TX_QUEUES	4 /* #tx queues on mac80211<->driver interface */
41 #define BRCMS_FLUSH_TIMEOUT	500 /* msec */
42 
43 /* Flags we support */
44 #define MAC_FILTERS (FIF_PROMISC_IN_BSS | \
45 	FIF_ALLMULTI | \
46 	FIF_FCSFAIL | \
47 	FIF_CONTROL | \
48 	FIF_OTHER_BSS | \
49 	FIF_BCN_PRBRESP_PROMISC | \
50 	FIF_PSPOLL)
51 
52 #define CHAN2GHZ(channel, freqency, chflags)  { \
53 	.band = IEEE80211_BAND_2GHZ, \
54 	.center_freq = (freqency), \
55 	.hw_value = (channel), \
56 	.flags = chflags, \
57 	.max_antenna_gain = 0, \
58 	.max_power = 19, \
59 }
60 
61 #define CHAN5GHZ(channel, chflags)  { \
62 	.band = IEEE80211_BAND_5GHZ, \
63 	.center_freq = 5000 + 5*(channel), \
64 	.hw_value = (channel), \
65 	.flags = chflags, \
66 	.max_antenna_gain = 0, \
67 	.max_power = 21, \
68 }
69 
70 #define RATE(rate100m, _flags) { \
71 	.bitrate = (rate100m), \
72 	.flags = (_flags), \
73 	.hw_value = (rate100m / 5), \
74 }
75 
76 struct firmware_hdr {
77 	__le32 offset;
78 	__le32 len;
79 	__le32 idx;
80 };
81 
82 static const char * const brcms_firmwares[MAX_FW_IMAGES] = {
83 	"brcm/bcm43xx",
84 	NULL
85 };
86 
87 static int n_adapters_found;
88 
89 MODULE_AUTHOR("Broadcom Corporation");
90 MODULE_DESCRIPTION("Broadcom 802.11n wireless LAN driver.");
91 MODULE_SUPPORTED_DEVICE("Broadcom 802.11n WLAN cards");
92 MODULE_LICENSE("Dual BSD/GPL");
93 /* This needs to be adjusted when brcms_firmwares changes */
94 MODULE_FIRMWARE("brcm/bcm43xx-0.fw");
95 MODULE_FIRMWARE("brcm/bcm43xx_hdr-0.fw");
96 
97 /* recognized BCMA Core IDs */
98 static struct bcma_device_id brcms_coreid_table[] = {
99 	BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, 17, BCMA_ANY_CLASS),
100 	BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, 23, BCMA_ANY_CLASS),
101 	BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, 24, BCMA_ANY_CLASS),
102 	BCMA_CORETABLE_END
103 };
104 MODULE_DEVICE_TABLE(bcma, brcms_coreid_table);
105 
106 #if defined(CONFIG_BRCMDBG)
107 /*
108  * Module parameter for setting the debug message level. Available
109  * flags are specified by the BRCM_DL_* macros in
110  * drivers/net/wireless/brcm80211/include/defs.h.
111  */
112 module_param_named(debug, brcm_msg_level, uint, S_IRUGO | S_IWUSR);
113 #endif
114 
115 static struct ieee80211_channel brcms_2ghz_chantable[] = {
116 	CHAN2GHZ(1, 2412, IEEE80211_CHAN_NO_HT40MINUS),
117 	CHAN2GHZ(2, 2417, IEEE80211_CHAN_NO_HT40MINUS),
118 	CHAN2GHZ(3, 2422, IEEE80211_CHAN_NO_HT40MINUS),
119 	CHAN2GHZ(4, 2427, IEEE80211_CHAN_NO_HT40MINUS),
120 	CHAN2GHZ(5, 2432, 0),
121 	CHAN2GHZ(6, 2437, 0),
122 	CHAN2GHZ(7, 2442, 0),
123 	CHAN2GHZ(8, 2447, IEEE80211_CHAN_NO_HT40PLUS),
124 	CHAN2GHZ(9, 2452, IEEE80211_CHAN_NO_HT40PLUS),
125 	CHAN2GHZ(10, 2457, IEEE80211_CHAN_NO_HT40PLUS),
126 	CHAN2GHZ(11, 2462, IEEE80211_CHAN_NO_HT40PLUS),
127 	CHAN2GHZ(12, 2467,
128 		 IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_IBSS |
129 		 IEEE80211_CHAN_NO_HT40PLUS),
130 	CHAN2GHZ(13, 2472,
131 		 IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_IBSS |
132 		 IEEE80211_CHAN_NO_HT40PLUS),
133 	CHAN2GHZ(14, 2484,
134 		 IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_IBSS |
135 		 IEEE80211_CHAN_NO_HT40PLUS | IEEE80211_CHAN_NO_HT40MINUS |
136 		 IEEE80211_CHAN_NO_OFDM)
137 };
138 
139 static struct ieee80211_channel brcms_5ghz_nphy_chantable[] = {
140 	/* UNII-1 */
141 	CHAN5GHZ(36, IEEE80211_CHAN_NO_HT40MINUS),
142 	CHAN5GHZ(40, IEEE80211_CHAN_NO_HT40PLUS),
143 	CHAN5GHZ(44, IEEE80211_CHAN_NO_HT40MINUS),
144 	CHAN5GHZ(48, IEEE80211_CHAN_NO_HT40PLUS),
145 	/* UNII-2 */
146 	CHAN5GHZ(52,
147 		 IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
148 		 IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40MINUS),
149 	CHAN5GHZ(56,
150 		 IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
151 		 IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40PLUS),
152 	CHAN5GHZ(60,
153 		 IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
154 		 IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40MINUS),
155 	CHAN5GHZ(64,
156 		 IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
157 		 IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40PLUS),
158 	/* MID */
159 	CHAN5GHZ(100,
160 		 IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
161 		 IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40MINUS),
162 	CHAN5GHZ(104,
163 		 IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
164 		 IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40PLUS),
165 	CHAN5GHZ(108,
166 		 IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
167 		 IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40MINUS),
168 	CHAN5GHZ(112,
169 		 IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
170 		 IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40PLUS),
171 	CHAN5GHZ(116,
172 		 IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
173 		 IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40MINUS),
174 	CHAN5GHZ(120,
175 		 IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
176 		 IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40PLUS),
177 	CHAN5GHZ(124,
178 		 IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
179 		 IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40MINUS),
180 	CHAN5GHZ(128,
181 		 IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
182 		 IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40PLUS),
183 	CHAN5GHZ(132,
184 		 IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
185 		 IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40MINUS),
186 	CHAN5GHZ(136,
187 		 IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
188 		 IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40PLUS),
189 	CHAN5GHZ(140,
190 		 IEEE80211_CHAN_RADAR | IEEE80211_CHAN_NO_IBSS |
191 		 IEEE80211_CHAN_PASSIVE_SCAN | IEEE80211_CHAN_NO_HT40PLUS |
192 		 IEEE80211_CHAN_NO_HT40MINUS),
193 	/* UNII-3 */
194 	CHAN5GHZ(149, IEEE80211_CHAN_NO_HT40MINUS),
195 	CHAN5GHZ(153, IEEE80211_CHAN_NO_HT40PLUS),
196 	CHAN5GHZ(157, IEEE80211_CHAN_NO_HT40MINUS),
197 	CHAN5GHZ(161, IEEE80211_CHAN_NO_HT40PLUS),
198 	CHAN5GHZ(165, IEEE80211_CHAN_NO_HT40PLUS | IEEE80211_CHAN_NO_HT40MINUS)
199 };
200 
201 /*
202  * The rate table is used for both 2.4G and 5G rates. The
203  * latter being a subset as it does not support CCK rates.
204  */
205 static struct ieee80211_rate legacy_ratetable[] = {
206 	RATE(10, 0),
207 	RATE(20, IEEE80211_RATE_SHORT_PREAMBLE),
208 	RATE(55, IEEE80211_RATE_SHORT_PREAMBLE),
209 	RATE(110, IEEE80211_RATE_SHORT_PREAMBLE),
210 	RATE(60, 0),
211 	RATE(90, 0),
212 	RATE(120, 0),
213 	RATE(180, 0),
214 	RATE(240, 0),
215 	RATE(360, 0),
216 	RATE(480, 0),
217 	RATE(540, 0),
218 };
219 
220 static const struct ieee80211_supported_band brcms_band_2GHz_nphy_template = {
221 	.band = IEEE80211_BAND_2GHZ,
222 	.channels = brcms_2ghz_chantable,
223 	.n_channels = ARRAY_SIZE(brcms_2ghz_chantable),
224 	.bitrates = legacy_ratetable,
225 	.n_bitrates = ARRAY_SIZE(legacy_ratetable),
226 	.ht_cap = {
227 		   /* from include/linux/ieee80211.h */
228 		   .cap = IEEE80211_HT_CAP_GRN_FLD |
229 			  IEEE80211_HT_CAP_SGI_20 | IEEE80211_HT_CAP_SGI_40,
230 		   .ht_supported = true,
231 		   .ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K,
232 		   .ampdu_density = AMPDU_DEF_MPDU_DENSITY,
233 		   .mcs = {
234 			   /* placeholders for now */
235 			   .rx_mask = {0xff, 0xff, 0, 0, 0, 0, 0, 0, 0, 0},
236 			   .rx_highest = cpu_to_le16(500),
237 			   .tx_params = IEEE80211_HT_MCS_TX_DEFINED}
238 		   }
239 };
240 
241 static const struct ieee80211_supported_band brcms_band_5GHz_nphy_template = {
242 	.band = IEEE80211_BAND_5GHZ,
243 	.channels = brcms_5ghz_nphy_chantable,
244 	.n_channels = ARRAY_SIZE(brcms_5ghz_nphy_chantable),
245 	.bitrates = legacy_ratetable + BRCMS_LEGACY_5G_RATE_OFFSET,
246 	.n_bitrates = ARRAY_SIZE(legacy_ratetable) -
247 			BRCMS_LEGACY_5G_RATE_OFFSET,
248 	.ht_cap = {
249 		   .cap = IEEE80211_HT_CAP_GRN_FLD | IEEE80211_HT_CAP_SGI_20 |
250 			  IEEE80211_HT_CAP_SGI_40,
251 		   .ht_supported = true,
252 		   .ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K,
253 		   .ampdu_density = AMPDU_DEF_MPDU_DENSITY,
254 		   .mcs = {
255 			   /* placeholders for now */
256 			   .rx_mask = {0xff, 0xff, 0, 0, 0, 0, 0, 0, 0, 0},
257 			   .rx_highest = cpu_to_le16(500),
258 			   .tx_params = IEEE80211_HT_MCS_TX_DEFINED}
259 		   }
260 };
261 
262 /* flags the given rate in rateset as requested */
brcms_set_basic_rate(struct brcm_rateset * rs,u16 rate,bool is_br)263 static void brcms_set_basic_rate(struct brcm_rateset *rs, u16 rate, bool is_br)
264 {
265 	u32 i;
266 
267 	for (i = 0; i < rs->count; i++) {
268 		if (rate != (rs->rates[i] & 0x7f))
269 			continue;
270 
271 		if (is_br)
272 			rs->rates[i] |= BRCMS_RATE_FLAG;
273 		else
274 			rs->rates[i] &= BRCMS_RATE_MASK;
275 		return;
276 	}
277 }
278 
279 /**
280  * This function frees the WL per-device resources.
281  *
282  * This function frees resources owned by the WL device pointed to
283  * by the wl parameter.
284  *
285  * precondition: can both be called locked and unlocked
286  *
287  */
brcms_free(struct brcms_info * wl)288 static void brcms_free(struct brcms_info *wl)
289 {
290 	struct brcms_timer *t, *next;
291 
292 	/* free ucode data */
293 	if (wl->fw.fw_cnt)
294 		brcms_ucode_data_free(&wl->ucode);
295 	if (wl->irq)
296 		free_irq(wl->irq, wl);
297 
298 	/* kill dpc */
299 	tasklet_kill(&wl->tasklet);
300 
301 	if (wl->pub) {
302 		brcms_debugfs_detach(wl->pub);
303 		brcms_c_module_unregister(wl->pub, "linux", wl);
304 	}
305 
306 	/* free common resources */
307 	if (wl->wlc) {
308 		brcms_c_detach(wl->wlc);
309 		wl->wlc = NULL;
310 		wl->pub = NULL;
311 	}
312 
313 	/* virtual interface deletion is deferred so we cannot spinwait */
314 
315 	/* wait for all pending callbacks to complete */
316 	while (atomic_read(&wl->callbacks) > 0)
317 		schedule();
318 
319 	/* free timers */
320 	for (t = wl->timers; t; t = next) {
321 		next = t->next;
322 #ifdef DEBUG
323 		kfree(t->name);
324 #endif
325 		kfree(t);
326 	}
327 }
328 
329 /*
330 * called from both kernel as from this kernel module (error flow on attach)
331 * precondition: perimeter lock is not acquired.
332 */
brcms_remove(struct bcma_device * pdev)333 static void brcms_remove(struct bcma_device *pdev)
334 {
335 	struct ieee80211_hw *hw = bcma_get_drvdata(pdev);
336 	struct brcms_info *wl = hw->priv;
337 
338 	if (wl->wlc) {
339 		brcms_led_unregister(wl);
340 		wiphy_rfkill_set_hw_state(wl->pub->ieee_hw->wiphy, false);
341 		wiphy_rfkill_stop_polling(wl->pub->ieee_hw->wiphy);
342 		ieee80211_unregister_hw(hw);
343 	}
344 
345 	brcms_free(wl);
346 
347 	bcma_set_drvdata(pdev, NULL);
348 	ieee80211_free_hw(hw);
349 }
350 
351 /*
352  * Precondition: Since this function is called in brcms_pci_probe() context,
353  * no locking is required.
354  */
brcms_release_fw(struct brcms_info * wl)355 static void brcms_release_fw(struct brcms_info *wl)
356 {
357 	int i;
358 	for (i = 0; i < MAX_FW_IMAGES; i++) {
359 		release_firmware(wl->fw.fw_bin[i]);
360 		release_firmware(wl->fw.fw_hdr[i]);
361 	}
362 }
363 
364 /*
365  * Precondition: Since this function is called in brcms_pci_probe() context,
366  * no locking is required.
367  */
brcms_request_fw(struct brcms_info * wl,struct bcma_device * pdev)368 static int brcms_request_fw(struct brcms_info *wl, struct bcma_device *pdev)
369 {
370 	int status;
371 	struct device *device = &pdev->dev;
372 	char fw_name[100];
373 	int i;
374 
375 	memset(&wl->fw, 0, sizeof(struct brcms_firmware));
376 	for (i = 0; i < MAX_FW_IMAGES; i++) {
377 		if (brcms_firmwares[i] == NULL)
378 			break;
379 		sprintf(fw_name, "%s-%d.fw", brcms_firmwares[i],
380 			UCODE_LOADER_API_VER);
381 		status = request_firmware(&wl->fw.fw_bin[i], fw_name, device);
382 		if (status) {
383 			wiphy_err(wl->wiphy, "%s: fail to load firmware %s\n",
384 				  KBUILD_MODNAME, fw_name);
385 			return status;
386 		}
387 		sprintf(fw_name, "%s_hdr-%d.fw", brcms_firmwares[i],
388 			UCODE_LOADER_API_VER);
389 		status = request_firmware(&wl->fw.fw_hdr[i], fw_name, device);
390 		if (status) {
391 			wiphy_err(wl->wiphy, "%s: fail to load firmware %s\n",
392 				  KBUILD_MODNAME, fw_name);
393 			return status;
394 		}
395 		wl->fw.hdr_num_entries[i] =
396 		    wl->fw.fw_hdr[i]->size / (sizeof(struct firmware_hdr));
397 	}
398 	wl->fw.fw_cnt = i;
399 	status = brcms_ucode_data_init(wl, &wl->ucode);
400 	brcms_release_fw(wl);
401 	return status;
402 }
403 
brcms_ops_tx(struct ieee80211_hw * hw,struct ieee80211_tx_control * control,struct sk_buff * skb)404 static void brcms_ops_tx(struct ieee80211_hw *hw,
405 			 struct ieee80211_tx_control *control,
406 			 struct sk_buff *skb)
407 {
408 	struct brcms_info *wl = hw->priv;
409 	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
410 
411 	spin_lock_bh(&wl->lock);
412 	if (!wl->pub->up) {
413 		brcms_err(wl->wlc->hw->d11core, "ops->tx called while down\n");
414 		kfree_skb(skb);
415 		goto done;
416 	}
417 	if (brcms_c_sendpkt_mac80211(wl->wlc, skb, hw))
418 		tx_info->rate_driver_data[0] = control->sta;
419  done:
420 	spin_unlock_bh(&wl->lock);
421 }
422 
brcms_ops_start(struct ieee80211_hw * hw)423 static int brcms_ops_start(struct ieee80211_hw *hw)
424 {
425 	struct brcms_info *wl = hw->priv;
426 	bool blocked;
427 	int err;
428 
429 	ieee80211_wake_queues(hw);
430 	spin_lock_bh(&wl->lock);
431 	blocked = brcms_rfkill_set_hw_state(wl);
432 	spin_unlock_bh(&wl->lock);
433 	if (!blocked)
434 		wiphy_rfkill_stop_polling(wl->pub->ieee_hw->wiphy);
435 
436 	if (!wl->ucode.bcm43xx_bomminor) {
437 		err = brcms_request_fw(wl, wl->wlc->hw->d11core);
438 		if (err) {
439 			brcms_remove(wl->wlc->hw->d11core);
440 			return -ENOENT;
441 		}
442 	}
443 
444 	spin_lock_bh(&wl->lock);
445 	/* avoid acknowledging frames before a non-monitor device is added */
446 	wl->mute_tx = true;
447 
448 	if (!wl->pub->up)
449 		if (!blocked)
450 			err = brcms_up(wl);
451 		else
452 			err = -ERFKILL;
453 	else
454 		err = -ENODEV;
455 	spin_unlock_bh(&wl->lock);
456 
457 	if (err != 0)
458 		brcms_err(wl->wlc->hw->d11core, "%s: brcms_up() returned %d\n",
459 			  __func__, err);
460 	return err;
461 }
462 
brcms_ops_stop(struct ieee80211_hw * hw)463 static void brcms_ops_stop(struct ieee80211_hw *hw)
464 {
465 	struct brcms_info *wl = hw->priv;
466 	int status;
467 
468 	ieee80211_stop_queues(hw);
469 
470 	if (wl->wlc == NULL)
471 		return;
472 
473 	spin_lock_bh(&wl->lock);
474 	status = brcms_c_chipmatch(wl->wlc->hw->d11core);
475 	spin_unlock_bh(&wl->lock);
476 	if (!status) {
477 		brcms_err(wl->wlc->hw->d11core,
478 			  "wl: brcms_ops_stop: chipmatch failed\n");
479 		return;
480 	}
481 
482 	/* put driver in down state */
483 	spin_lock_bh(&wl->lock);
484 	brcms_down(wl);
485 	spin_unlock_bh(&wl->lock);
486 }
487 
488 static int
brcms_ops_add_interface(struct ieee80211_hw * hw,struct ieee80211_vif * vif)489 brcms_ops_add_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
490 {
491 	struct brcms_info *wl = hw->priv;
492 
493 	/* Just STA, AP and ADHOC for now */
494 	if (vif->type != NL80211_IFTYPE_STATION &&
495 	    vif->type != NL80211_IFTYPE_AP &&
496 	    vif->type != NL80211_IFTYPE_ADHOC) {
497 		brcms_err(wl->wlc->hw->d11core,
498 			  "%s: Attempt to add type %d, only STA, AP and AdHoc for now\n",
499 			  __func__, vif->type);
500 		return -EOPNOTSUPP;
501 	}
502 
503 	spin_lock_bh(&wl->lock);
504 	wl->mute_tx = false;
505 	brcms_c_mute(wl->wlc, false);
506 	if (vif->type == NL80211_IFTYPE_STATION)
507 		brcms_c_start_station(wl->wlc, vif->addr);
508 	else if (vif->type == NL80211_IFTYPE_AP)
509 		brcms_c_start_ap(wl->wlc, vif->addr, vif->bss_conf.bssid,
510 				 vif->bss_conf.ssid, vif->bss_conf.ssid_len);
511 	else if (vif->type == NL80211_IFTYPE_ADHOC)
512 		brcms_c_start_adhoc(wl->wlc, vif->addr);
513 	spin_unlock_bh(&wl->lock);
514 
515 	return 0;
516 }
517 
518 static void
brcms_ops_remove_interface(struct ieee80211_hw * hw,struct ieee80211_vif * vif)519 brcms_ops_remove_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
520 {
521 }
522 
brcms_ops_config(struct ieee80211_hw * hw,u32 changed)523 static int brcms_ops_config(struct ieee80211_hw *hw, u32 changed)
524 {
525 	struct ieee80211_conf *conf = &hw->conf;
526 	struct brcms_info *wl = hw->priv;
527 	struct bcma_device *core = wl->wlc->hw->d11core;
528 	int err = 0;
529 	int new_int;
530 
531 	spin_lock_bh(&wl->lock);
532 	if (changed & IEEE80211_CONF_CHANGE_LISTEN_INTERVAL) {
533 		brcms_c_set_beacon_listen_interval(wl->wlc,
534 						   conf->listen_interval);
535 	}
536 	if (changed & IEEE80211_CONF_CHANGE_MONITOR)
537 		brcms_dbg_info(core, "%s: change monitor mode: %s\n",
538 			       __func__, conf->flags & IEEE80211_CONF_MONITOR ?
539 			       "true" : "false");
540 	if (changed & IEEE80211_CONF_CHANGE_PS)
541 		brcms_err(core, "%s: change power-save mode: %s (implement)\n",
542 			  __func__, conf->flags & IEEE80211_CONF_PS ?
543 			  "true" : "false");
544 
545 	if (changed & IEEE80211_CONF_CHANGE_POWER) {
546 		err = brcms_c_set_tx_power(wl->wlc, conf->power_level);
547 		if (err < 0) {
548 			brcms_err(core, "%s: Error setting power_level\n",
549 				  __func__);
550 			goto config_out;
551 		}
552 		new_int = brcms_c_get_tx_power(wl->wlc);
553 		if (new_int != conf->power_level)
554 			brcms_err(core,
555 				  "%s: Power level req != actual, %d %d\n",
556 				  __func__, conf->power_level,
557 				  new_int);
558 	}
559 	if (changed & IEEE80211_CONF_CHANGE_CHANNEL) {
560 		if (conf->chandef.width == NL80211_CHAN_WIDTH_20 ||
561 		    conf->chandef.width == NL80211_CHAN_WIDTH_20_NOHT)
562 			err = brcms_c_set_channel(wl->wlc,
563 						  conf->chandef.chan->hw_value);
564 		else
565 			err = -ENOTSUPP;
566 	}
567 	if (changed & IEEE80211_CONF_CHANGE_RETRY_LIMITS)
568 		err = brcms_c_set_rate_limit(wl->wlc,
569 					     conf->short_frame_max_tx_count,
570 					     conf->long_frame_max_tx_count);
571 
572  config_out:
573 	spin_unlock_bh(&wl->lock);
574 	return err;
575 }
576 
577 static void
brcms_ops_bss_info_changed(struct ieee80211_hw * hw,struct ieee80211_vif * vif,struct ieee80211_bss_conf * info,u32 changed)578 brcms_ops_bss_info_changed(struct ieee80211_hw *hw,
579 			struct ieee80211_vif *vif,
580 			struct ieee80211_bss_conf *info, u32 changed)
581 {
582 	struct brcms_info *wl = hw->priv;
583 	struct bcma_device *core = wl->wlc->hw->d11core;
584 
585 	if (changed & BSS_CHANGED_ASSOC) {
586 		/* association status changed (associated/disassociated)
587 		 * also implies a change in the AID.
588 		 */
589 		brcms_err(core, "%s: %s: %sassociated\n", KBUILD_MODNAME,
590 			  __func__, info->assoc ? "" : "dis");
591 		spin_lock_bh(&wl->lock);
592 		brcms_c_associate_upd(wl->wlc, info->assoc);
593 		spin_unlock_bh(&wl->lock);
594 	}
595 	if (changed & BSS_CHANGED_ERP_SLOT) {
596 		s8 val;
597 
598 		/* slot timing changed */
599 		if (info->use_short_slot)
600 			val = 1;
601 		else
602 			val = 0;
603 		spin_lock_bh(&wl->lock);
604 		brcms_c_set_shortslot_override(wl->wlc, val);
605 		spin_unlock_bh(&wl->lock);
606 	}
607 
608 	if (changed & BSS_CHANGED_HT) {
609 		/* 802.11n parameters changed */
610 		u16 mode = info->ht_operation_mode;
611 
612 		spin_lock_bh(&wl->lock);
613 		brcms_c_protection_upd(wl->wlc, BRCMS_PROT_N_CFG,
614 			mode & IEEE80211_HT_OP_MODE_PROTECTION);
615 		brcms_c_protection_upd(wl->wlc, BRCMS_PROT_N_NONGF,
616 			mode & IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT);
617 		brcms_c_protection_upd(wl->wlc, BRCMS_PROT_N_OBSS,
618 			mode & IEEE80211_HT_OP_MODE_NON_HT_STA_PRSNT);
619 		spin_unlock_bh(&wl->lock);
620 	}
621 	if (changed & BSS_CHANGED_BASIC_RATES) {
622 		struct ieee80211_supported_band *bi;
623 		u32 br_mask, i;
624 		u16 rate;
625 		struct brcm_rateset rs;
626 		int error;
627 
628 		/* retrieve the current rates */
629 		spin_lock_bh(&wl->lock);
630 		brcms_c_get_current_rateset(wl->wlc, &rs);
631 		spin_unlock_bh(&wl->lock);
632 
633 		br_mask = info->basic_rates;
634 		bi = hw->wiphy->bands[brcms_c_get_curband(wl->wlc)];
635 		for (i = 0; i < bi->n_bitrates; i++) {
636 			/* convert to internal rate value */
637 			rate = (bi->bitrates[i].bitrate << 1) / 10;
638 
639 			/* set/clear basic rate flag */
640 			brcms_set_basic_rate(&rs, rate, br_mask & 1);
641 			br_mask >>= 1;
642 		}
643 
644 		/* update the rate set */
645 		spin_lock_bh(&wl->lock);
646 		error = brcms_c_set_rateset(wl->wlc, &rs);
647 		spin_unlock_bh(&wl->lock);
648 		if (error)
649 			brcms_err(core, "changing basic rates failed: %d\n",
650 				  error);
651 	}
652 	if (changed & BSS_CHANGED_BEACON_INT) {
653 		/* Beacon interval changed */
654 		spin_lock_bh(&wl->lock);
655 		brcms_c_set_beacon_period(wl->wlc, info->beacon_int);
656 		spin_unlock_bh(&wl->lock);
657 	}
658 	if (changed & BSS_CHANGED_BSSID) {
659 		/* BSSID changed, for whatever reason (IBSS and managed mode) */
660 		spin_lock_bh(&wl->lock);
661 		brcms_c_set_addrmatch(wl->wlc, RCM_BSSID_OFFSET, info->bssid);
662 		spin_unlock_bh(&wl->lock);
663 	}
664 	if (changed & BSS_CHANGED_SSID) {
665 		/* BSSID changed, for whatever reason (IBSS and managed mode) */
666 		spin_lock_bh(&wl->lock);
667 		brcms_c_set_ssid(wl->wlc, info->ssid, info->ssid_len);
668 		spin_unlock_bh(&wl->lock);
669 	}
670 	if (changed & BSS_CHANGED_BEACON) {
671 		/* Beacon data changed, retrieve new beacon (beaconing modes) */
672 		struct sk_buff *beacon;
673 		u16 tim_offset = 0;
674 
675 		spin_lock_bh(&wl->lock);
676 		beacon = ieee80211_beacon_get_tim(hw, vif, &tim_offset, NULL);
677 		brcms_c_set_new_beacon(wl->wlc, beacon, tim_offset,
678 				       info->dtim_period);
679 		spin_unlock_bh(&wl->lock);
680 	}
681 
682 	if (changed & BSS_CHANGED_AP_PROBE_RESP) {
683 		struct sk_buff *probe_resp;
684 
685 		spin_lock_bh(&wl->lock);
686 		probe_resp = ieee80211_proberesp_get(hw, vif);
687 		brcms_c_set_new_probe_resp(wl->wlc, probe_resp);
688 		spin_unlock_bh(&wl->lock);
689 	}
690 
691 	if (changed & BSS_CHANGED_BEACON_ENABLED) {
692 		/* Beaconing should be enabled/disabled (beaconing modes) */
693 		brcms_err(core, "%s: Beacon enabled: %s\n", __func__,
694 			  info->enable_beacon ? "true" : "false");
695 		if (info->enable_beacon &&
696 		    hw->wiphy->flags & WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD) {
697 			brcms_c_enable_probe_resp(wl->wlc, true);
698 		} else {
699 			brcms_c_enable_probe_resp(wl->wlc, false);
700 		}
701 	}
702 
703 	if (changed & BSS_CHANGED_CQM) {
704 		/* Connection quality monitor config changed */
705 		brcms_err(core, "%s: cqm change: threshold %d, hys %d "
706 			  " (implement)\n", __func__, info->cqm_rssi_thold,
707 			  info->cqm_rssi_hyst);
708 	}
709 
710 	if (changed & BSS_CHANGED_IBSS) {
711 		/* IBSS join status changed */
712 		brcms_err(core, "%s: IBSS joined: %s (implement)\n",
713 			  __func__, info->ibss_joined ? "true" : "false");
714 	}
715 
716 	if (changed & BSS_CHANGED_ARP_FILTER) {
717 		/* Hardware ARP filter address list or state changed */
718 		brcms_err(core, "%s: arp filtering: %d addresses"
719 			  " (implement)\n", __func__, info->arp_addr_cnt);
720 	}
721 
722 	if (changed & BSS_CHANGED_QOS) {
723 		/*
724 		 * QoS for this association was enabled/disabled.
725 		 * Note that it is only ever disabled for station mode.
726 		 */
727 		brcms_err(core, "%s: qos enabled: %s (implement)\n",
728 			  __func__, info->qos ? "true" : "false");
729 	}
730 	return;
731 }
732 
733 static void
brcms_ops_configure_filter(struct ieee80211_hw * hw,unsigned int changed_flags,unsigned int * total_flags,u64 multicast)734 brcms_ops_configure_filter(struct ieee80211_hw *hw,
735 			unsigned int changed_flags,
736 			unsigned int *total_flags, u64 multicast)
737 {
738 	struct brcms_info *wl = hw->priv;
739 	struct bcma_device *core = wl->wlc->hw->d11core;
740 
741 	changed_flags &= MAC_FILTERS;
742 	*total_flags &= MAC_FILTERS;
743 
744 	if (changed_flags & FIF_PROMISC_IN_BSS)
745 		brcms_dbg_info(core, "FIF_PROMISC_IN_BSS\n");
746 	if (changed_flags & FIF_ALLMULTI)
747 		brcms_dbg_info(core, "FIF_ALLMULTI\n");
748 	if (changed_flags & FIF_FCSFAIL)
749 		brcms_dbg_info(core, "FIF_FCSFAIL\n");
750 	if (changed_flags & FIF_CONTROL)
751 		brcms_dbg_info(core, "FIF_CONTROL\n");
752 	if (changed_flags & FIF_OTHER_BSS)
753 		brcms_dbg_info(core, "FIF_OTHER_BSS\n");
754 	if (changed_flags & FIF_PSPOLL)
755 		brcms_dbg_info(core, "FIF_PSPOLL\n");
756 	if (changed_flags & FIF_BCN_PRBRESP_PROMISC)
757 		brcms_dbg_info(core, "FIF_BCN_PRBRESP_PROMISC\n");
758 
759 	spin_lock_bh(&wl->lock);
760 	brcms_c_mac_promisc(wl->wlc, *total_flags);
761 	spin_unlock_bh(&wl->lock);
762 	return;
763 }
764 
brcms_ops_sw_scan_start(struct ieee80211_hw * hw)765 static void brcms_ops_sw_scan_start(struct ieee80211_hw *hw)
766 {
767 	struct brcms_info *wl = hw->priv;
768 	spin_lock_bh(&wl->lock);
769 	brcms_c_scan_start(wl->wlc);
770 	spin_unlock_bh(&wl->lock);
771 	return;
772 }
773 
brcms_ops_sw_scan_complete(struct ieee80211_hw * hw)774 static void brcms_ops_sw_scan_complete(struct ieee80211_hw *hw)
775 {
776 	struct brcms_info *wl = hw->priv;
777 	spin_lock_bh(&wl->lock);
778 	brcms_c_scan_stop(wl->wlc);
779 	spin_unlock_bh(&wl->lock);
780 	return;
781 }
782 
783 static int
brcms_ops_conf_tx(struct ieee80211_hw * hw,struct ieee80211_vif * vif,u16 queue,const struct ieee80211_tx_queue_params * params)784 brcms_ops_conf_tx(struct ieee80211_hw *hw, struct ieee80211_vif *vif, u16 queue,
785 		  const struct ieee80211_tx_queue_params *params)
786 {
787 	struct brcms_info *wl = hw->priv;
788 
789 	spin_lock_bh(&wl->lock);
790 	brcms_c_wme_setparams(wl->wlc, queue, params, true);
791 	spin_unlock_bh(&wl->lock);
792 
793 	return 0;
794 }
795 
796 static int
brcms_ops_sta_add(struct ieee80211_hw * hw,struct ieee80211_vif * vif,struct ieee80211_sta * sta)797 brcms_ops_sta_add(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
798 	       struct ieee80211_sta *sta)
799 {
800 	struct brcms_info *wl = hw->priv;
801 	struct scb *scb = &wl->wlc->pri_scb;
802 
803 	brcms_c_init_scb(scb);
804 
805 	wl->pub->global_ampdu = &(scb->scb_ampdu);
806 	wl->pub->global_ampdu->scb = scb;
807 	wl->pub->global_ampdu->max_pdu = 16;
808 
809 	/*
810 	 * minstrel_ht initiates addBA on our behalf by calling
811 	 * ieee80211_start_tx_ba_session()
812 	 */
813 	return 0;
814 }
815 
816 static int
brcms_ops_ampdu_action(struct ieee80211_hw * hw,struct ieee80211_vif * vif,enum ieee80211_ampdu_mlme_action action,struct ieee80211_sta * sta,u16 tid,u16 * ssn,u8 buf_size)817 brcms_ops_ampdu_action(struct ieee80211_hw *hw,
818 		    struct ieee80211_vif *vif,
819 		    enum ieee80211_ampdu_mlme_action action,
820 		    struct ieee80211_sta *sta, u16 tid, u16 *ssn,
821 		    u8 buf_size)
822 {
823 	struct brcms_info *wl = hw->priv;
824 	struct scb *scb = &wl->wlc->pri_scb;
825 	int status;
826 
827 	if (WARN_ON(scb->magic != SCB_MAGIC))
828 		return -EIDRM;
829 	switch (action) {
830 	case IEEE80211_AMPDU_RX_START:
831 		break;
832 	case IEEE80211_AMPDU_RX_STOP:
833 		break;
834 	case IEEE80211_AMPDU_TX_START:
835 		spin_lock_bh(&wl->lock);
836 		status = brcms_c_aggregatable(wl->wlc, tid);
837 		spin_unlock_bh(&wl->lock);
838 		if (!status) {
839 			brcms_err(wl->wlc->hw->d11core,
840 				  "START: tid %d is not agg\'able\n", tid);
841 			return -EINVAL;
842 		}
843 		ieee80211_start_tx_ba_cb_irqsafe(vif, sta->addr, tid);
844 		break;
845 
846 	case IEEE80211_AMPDU_TX_STOP_CONT:
847 	case IEEE80211_AMPDU_TX_STOP_FLUSH:
848 	case IEEE80211_AMPDU_TX_STOP_FLUSH_CONT:
849 		spin_lock_bh(&wl->lock);
850 		brcms_c_ampdu_flush(wl->wlc, sta, tid);
851 		spin_unlock_bh(&wl->lock);
852 		ieee80211_stop_tx_ba_cb_irqsafe(vif, sta->addr, tid);
853 		break;
854 	case IEEE80211_AMPDU_TX_OPERATIONAL:
855 		/*
856 		 * BA window size from ADDBA response ('buf_size') defines how
857 		 * many outstanding MPDUs are allowed for the BA stream by
858 		 * recipient and traffic class. 'ampdu_factor' gives maximum
859 		 * AMPDU size.
860 		 */
861 		spin_lock_bh(&wl->lock);
862 		brcms_c_ampdu_tx_operational(wl->wlc, tid, buf_size,
863 			(1 << (IEEE80211_HT_MAX_AMPDU_FACTOR +
864 			 sta->ht_cap.ampdu_factor)) - 1);
865 		spin_unlock_bh(&wl->lock);
866 		/* Power save wakeup */
867 		break;
868 	default:
869 		brcms_err(wl->wlc->hw->d11core,
870 			  "%s: Invalid command, ignoring\n", __func__);
871 	}
872 
873 	return 0;
874 }
875 
brcms_ops_rfkill_poll(struct ieee80211_hw * hw)876 static void brcms_ops_rfkill_poll(struct ieee80211_hw *hw)
877 {
878 	struct brcms_info *wl = hw->priv;
879 	bool blocked;
880 
881 	spin_lock_bh(&wl->lock);
882 	blocked = brcms_c_check_radio_disabled(wl->wlc);
883 	spin_unlock_bh(&wl->lock);
884 
885 	wiphy_rfkill_set_hw_state(wl->pub->ieee_hw->wiphy, blocked);
886 }
887 
brcms_tx_flush_completed(struct brcms_info * wl)888 static bool brcms_tx_flush_completed(struct brcms_info *wl)
889 {
890 	bool result;
891 
892 	spin_lock_bh(&wl->lock);
893 	result = brcms_c_tx_flush_completed(wl->wlc);
894 	spin_unlock_bh(&wl->lock);
895 	return result;
896 }
897 
brcms_ops_flush(struct ieee80211_hw * hw,u32 queues,bool drop)898 static void brcms_ops_flush(struct ieee80211_hw *hw, u32 queues, bool drop)
899 {
900 	struct brcms_info *wl = hw->priv;
901 	int ret;
902 
903 	no_printk("%s: drop = %s\n", __func__, drop ? "true" : "false");
904 
905 	ret = wait_event_timeout(wl->tx_flush_wq,
906 				 brcms_tx_flush_completed(wl),
907 				 msecs_to_jiffies(BRCMS_FLUSH_TIMEOUT));
908 
909 	brcms_dbg_mac80211(wl->wlc->hw->d11core,
910 			   "ret=%d\n", jiffies_to_msecs(ret));
911 }
912 
brcms_ops_get_tsf(struct ieee80211_hw * hw,struct ieee80211_vif * vif)913 static u64 brcms_ops_get_tsf(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
914 {
915 	struct brcms_info *wl = hw->priv;
916 	u64 tsf;
917 
918 	spin_lock_bh(&wl->lock);
919 	tsf = brcms_c_tsf_get(wl->wlc);
920 	spin_unlock_bh(&wl->lock);
921 
922 	return tsf;
923 }
924 
brcms_ops_set_tsf(struct ieee80211_hw * hw,struct ieee80211_vif * vif,u64 tsf)925 static void brcms_ops_set_tsf(struct ieee80211_hw *hw,
926 			   struct ieee80211_vif *vif, u64 tsf)
927 {
928 	struct brcms_info *wl = hw->priv;
929 
930 	spin_lock_bh(&wl->lock);
931 	brcms_c_tsf_set(wl->wlc, tsf);
932 	spin_unlock_bh(&wl->lock);
933 }
934 
935 static const struct ieee80211_ops brcms_ops = {
936 	.tx = brcms_ops_tx,
937 	.start = brcms_ops_start,
938 	.stop = brcms_ops_stop,
939 	.add_interface = brcms_ops_add_interface,
940 	.remove_interface = brcms_ops_remove_interface,
941 	.config = brcms_ops_config,
942 	.bss_info_changed = brcms_ops_bss_info_changed,
943 	.configure_filter = brcms_ops_configure_filter,
944 	.sw_scan_start = brcms_ops_sw_scan_start,
945 	.sw_scan_complete = brcms_ops_sw_scan_complete,
946 	.conf_tx = brcms_ops_conf_tx,
947 	.sta_add = brcms_ops_sta_add,
948 	.ampdu_action = brcms_ops_ampdu_action,
949 	.rfkill_poll = brcms_ops_rfkill_poll,
950 	.flush = brcms_ops_flush,
951 	.get_tsf = brcms_ops_get_tsf,
952 	.set_tsf = brcms_ops_set_tsf,
953 };
954 
brcms_dpc(unsigned long data)955 void brcms_dpc(unsigned long data)
956 {
957 	struct brcms_info *wl;
958 
959 	wl = (struct brcms_info *) data;
960 
961 	spin_lock_bh(&wl->lock);
962 
963 	/* call the common second level interrupt handler */
964 	if (wl->pub->up) {
965 		if (wl->resched) {
966 			unsigned long flags;
967 
968 			spin_lock_irqsave(&wl->isr_lock, flags);
969 			brcms_c_intrsupd(wl->wlc);
970 			spin_unlock_irqrestore(&wl->isr_lock, flags);
971 		}
972 
973 		wl->resched = brcms_c_dpc(wl->wlc, true);
974 	}
975 
976 	/* brcms_c_dpc() may bring the driver down */
977 	if (!wl->pub->up)
978 		goto done;
979 
980 	/* re-schedule dpc */
981 	if (wl->resched)
982 		tasklet_schedule(&wl->tasklet);
983 	else
984 		/* re-enable interrupts */
985 		brcms_intrson(wl);
986 
987  done:
988 	spin_unlock_bh(&wl->lock);
989 	wake_up(&wl->tx_flush_wq);
990 }
991 
brcms_isr(int irq,void * dev_id)992 static irqreturn_t brcms_isr(int irq, void *dev_id)
993 {
994 	struct brcms_info *wl;
995 	irqreturn_t ret = IRQ_NONE;
996 
997 	wl = (struct brcms_info *) dev_id;
998 
999 	spin_lock(&wl->isr_lock);
1000 
1001 	/* call common first level interrupt handler */
1002 	if (brcms_c_isr(wl->wlc)) {
1003 		/* schedule second level handler */
1004 		tasklet_schedule(&wl->tasklet);
1005 		ret = IRQ_HANDLED;
1006 	}
1007 
1008 	spin_unlock(&wl->isr_lock);
1009 
1010 	return ret;
1011 }
1012 
1013 /*
1014  * is called in brcms_pci_probe() context, therefore no locking required.
1015  */
ieee_hw_rate_init(struct ieee80211_hw * hw)1016 static int ieee_hw_rate_init(struct ieee80211_hw *hw)
1017 {
1018 	struct brcms_info *wl = hw->priv;
1019 	struct brcms_c_info *wlc = wl->wlc;
1020 	struct ieee80211_supported_band *band;
1021 	int has_5g = 0;
1022 	u16 phy_type;
1023 
1024 	hw->wiphy->bands[IEEE80211_BAND_2GHZ] = NULL;
1025 	hw->wiphy->bands[IEEE80211_BAND_5GHZ] = NULL;
1026 
1027 	phy_type = brcms_c_get_phy_type(wl->wlc, 0);
1028 	if (phy_type == PHY_TYPE_N || phy_type == PHY_TYPE_LCN) {
1029 		band = &wlc->bandstate[BAND_2G_INDEX]->band;
1030 		*band = brcms_band_2GHz_nphy_template;
1031 		if (phy_type == PHY_TYPE_LCN) {
1032 			/* Single stream */
1033 			band->ht_cap.mcs.rx_mask[1] = 0;
1034 			band->ht_cap.mcs.rx_highest = cpu_to_le16(72);
1035 		}
1036 		hw->wiphy->bands[IEEE80211_BAND_2GHZ] = band;
1037 	} else {
1038 		return -EPERM;
1039 	}
1040 
1041 	/* Assume all bands use the same phy.  True for 11n devices. */
1042 	if (wl->pub->_nbands > 1) {
1043 		has_5g++;
1044 		if (phy_type == PHY_TYPE_N || phy_type == PHY_TYPE_LCN) {
1045 			band = &wlc->bandstate[BAND_5G_INDEX]->band;
1046 			*band = brcms_band_5GHz_nphy_template;
1047 			hw->wiphy->bands[IEEE80211_BAND_5GHZ] = band;
1048 		} else {
1049 			return -EPERM;
1050 		}
1051 	}
1052 	return 0;
1053 }
1054 
1055 /*
1056  * is called in brcms_pci_probe() context, therefore no locking required.
1057  */
ieee_hw_init(struct ieee80211_hw * hw)1058 static int ieee_hw_init(struct ieee80211_hw *hw)
1059 {
1060 	hw->flags = IEEE80211_HW_SIGNAL_DBM
1061 	    /* | IEEE80211_HW_CONNECTION_MONITOR  What is this? */
1062 	    | IEEE80211_HW_REPORTS_TX_ACK_STATUS
1063 	    | IEEE80211_HW_AMPDU_AGGREGATION;
1064 
1065 	hw->extra_tx_headroom = brcms_c_get_header_len();
1066 	hw->queues = N_TX_QUEUES;
1067 	hw->max_rates = 2;	/* Primary rate and 1 fallback rate */
1068 
1069 	/* channel change time is dependent on chip and band  */
1070 	hw->channel_change_time = 7 * 1000;
1071 	hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) |
1072 				     BIT(NL80211_IFTYPE_AP) |
1073 				     BIT(NL80211_IFTYPE_ADHOC);
1074 
1075 	/*
1076 	 * deactivate sending probe responses by ucude, because this will
1077 	 * cause problems when WPS is used.
1078 	 *
1079 	 * hw->wiphy->flags |= WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD;
1080 	 */
1081 
1082 	hw->rate_control_algorithm = "minstrel_ht";
1083 
1084 	hw->sta_data_size = 0;
1085 	return ieee_hw_rate_init(hw);
1086 }
1087 
1088 /**
1089  * attach to the WL device.
1090  *
1091  * Attach to the WL device identified by vendor and device parameters.
1092  * regs is a host accessible memory address pointing to WL device registers.
1093  *
1094  * brcms_attach is not defined as static because in the case where no bus
1095  * is defined, wl_attach will never be called, and thus, gcc will issue
1096  * a warning that this function is defined but not used if we declare
1097  * it as static.
1098  *
1099  *
1100  * is called in brcms_bcma_probe() context, therefore no locking required.
1101  */
brcms_attach(struct bcma_device * pdev)1102 static struct brcms_info *brcms_attach(struct bcma_device *pdev)
1103 {
1104 	struct brcms_info *wl = NULL;
1105 	int unit, err;
1106 	struct ieee80211_hw *hw;
1107 	u8 perm[ETH_ALEN];
1108 
1109 	unit = n_adapters_found;
1110 	err = 0;
1111 
1112 	if (unit < 0)
1113 		return NULL;
1114 
1115 	/* allocate private info */
1116 	hw = bcma_get_drvdata(pdev);
1117 	if (hw != NULL)
1118 		wl = hw->priv;
1119 	if (WARN_ON(hw == NULL) || WARN_ON(wl == NULL))
1120 		return NULL;
1121 	wl->wiphy = hw->wiphy;
1122 
1123 	atomic_set(&wl->callbacks, 0);
1124 
1125 	init_waitqueue_head(&wl->tx_flush_wq);
1126 
1127 	/* setup the bottom half handler */
1128 	tasklet_init(&wl->tasklet, brcms_dpc, (unsigned long) wl);
1129 
1130 	spin_lock_init(&wl->lock);
1131 	spin_lock_init(&wl->isr_lock);
1132 
1133 	/* common load-time initialization */
1134 	wl->wlc = brcms_c_attach((void *)wl, pdev, unit, false, &err);
1135 	if (!wl->wlc) {
1136 		wiphy_err(wl->wiphy, "%s: attach() failed with code %d\n",
1137 			  KBUILD_MODNAME, err);
1138 		goto fail;
1139 	}
1140 	wl->pub = brcms_c_pub(wl->wlc);
1141 
1142 	wl->pub->ieee_hw = hw;
1143 
1144 	/* register our interrupt handler */
1145 	if (request_irq(pdev->irq, brcms_isr,
1146 			IRQF_SHARED, KBUILD_MODNAME, wl)) {
1147 		wiphy_err(wl->wiphy, "wl%d: request_irq() failed\n", unit);
1148 		goto fail;
1149 	}
1150 	wl->irq = pdev->irq;
1151 
1152 	/* register module */
1153 	brcms_c_module_register(wl->pub, "linux", wl, NULL);
1154 
1155 	if (ieee_hw_init(hw)) {
1156 		wiphy_err(wl->wiphy, "wl%d: %s: ieee_hw_init failed!\n", unit,
1157 			  __func__);
1158 		goto fail;
1159 	}
1160 
1161 	brcms_c_regd_init(wl->wlc);
1162 
1163 	memcpy(perm, &wl->pub->cur_etheraddr, ETH_ALEN);
1164 	if (WARN_ON(!is_valid_ether_addr(perm)))
1165 		goto fail;
1166 	SET_IEEE80211_PERM_ADDR(hw, perm);
1167 
1168 	err = ieee80211_register_hw(hw);
1169 	if (err)
1170 		wiphy_err(wl->wiphy, "%s: ieee80211_register_hw failed, status"
1171 			  "%d\n", __func__, err);
1172 
1173 	if (wl->pub->srom_ccode[0] &&
1174 	    regulatory_hint(wl->wiphy, wl->pub->srom_ccode))
1175 		wiphy_err(wl->wiphy, "%s: regulatory hint failed\n", __func__);
1176 
1177 	brcms_debugfs_attach(wl->pub);
1178 	brcms_debugfs_create_files(wl->pub);
1179 	n_adapters_found++;
1180 	return wl;
1181 
1182 fail:
1183 	brcms_free(wl);
1184 	return NULL;
1185 }
1186 
1187 
1188 
1189 /**
1190  * determines if a device is a WL device, and if so, attaches it.
1191  *
1192  * This function determines if a device pointed to by pdev is a WL device,
1193  * and if so, performs a brcms_attach() on it.
1194  *
1195  * Perimeter lock is initialized in the course of this function.
1196  */
brcms_bcma_probe(struct bcma_device * pdev)1197 static int brcms_bcma_probe(struct bcma_device *pdev)
1198 {
1199 	struct brcms_info *wl;
1200 	struct ieee80211_hw *hw;
1201 
1202 	dev_info(&pdev->dev, "mfg %x core %x rev %d class %d irq %d\n",
1203 		 pdev->id.manuf, pdev->id.id, pdev->id.rev, pdev->id.class,
1204 		 pdev->irq);
1205 
1206 	if ((pdev->id.manuf != BCMA_MANUF_BCM) ||
1207 	    (pdev->id.id != BCMA_CORE_80211))
1208 		return -ENODEV;
1209 
1210 	hw = ieee80211_alloc_hw(sizeof(struct brcms_info), &brcms_ops);
1211 	if (!hw) {
1212 		pr_err("%s: ieee80211_alloc_hw failed\n", __func__);
1213 		return -ENOMEM;
1214 	}
1215 
1216 	SET_IEEE80211_DEV(hw, &pdev->dev);
1217 
1218 	bcma_set_drvdata(pdev, hw);
1219 
1220 	memset(hw->priv, 0, sizeof(*wl));
1221 
1222 	wl = brcms_attach(pdev);
1223 	if (!wl) {
1224 		pr_err("%s: brcms_attach failed!\n", __func__);
1225 		return -ENODEV;
1226 	}
1227 	brcms_led_register(wl);
1228 
1229 	return 0;
1230 }
1231 
brcms_suspend(struct bcma_device * pdev)1232 static int brcms_suspend(struct bcma_device *pdev)
1233 {
1234 	struct brcms_info *wl;
1235 	struct ieee80211_hw *hw;
1236 
1237 	hw = bcma_get_drvdata(pdev);
1238 	wl = hw->priv;
1239 	if (!wl) {
1240 		pr_err("%s: %s: no driver private struct!\n", KBUILD_MODNAME,
1241 		       __func__);
1242 		return -ENODEV;
1243 	}
1244 
1245 	/* only need to flag hw is down for proper resume */
1246 	spin_lock_bh(&wl->lock);
1247 	wl->pub->hw_up = false;
1248 	spin_unlock_bh(&wl->lock);
1249 
1250 	brcms_dbg_info(wl->wlc->hw->d11core, "brcms_suspend ok\n");
1251 
1252 	return 0;
1253 }
1254 
brcms_resume(struct bcma_device * pdev)1255 static int brcms_resume(struct bcma_device *pdev)
1256 {
1257 	return 0;
1258 }
1259 
1260 static struct bcma_driver brcms_bcma_driver = {
1261 	.name     = KBUILD_MODNAME,
1262 	.probe    = brcms_bcma_probe,
1263 	.suspend  = brcms_suspend,
1264 	.resume   = brcms_resume,
1265 	.remove   = brcms_remove,
1266 	.id_table = brcms_coreid_table,
1267 };
1268 
1269 /**
1270  * This is the main entry point for the brcmsmac driver.
1271  *
1272  * This function is scheduled upon module initialization and
1273  * does the driver registration, which result in brcms_bcma_probe()
1274  * call resulting in the driver bringup.
1275  */
brcms_driver_init(struct work_struct * work)1276 static void brcms_driver_init(struct work_struct *work)
1277 {
1278 	int error;
1279 
1280 	error = bcma_driver_register(&brcms_bcma_driver);
1281 	if (error)
1282 		pr_err("%s: register returned %d\n", __func__, error);
1283 }
1284 
1285 static DECLARE_WORK(brcms_driver_work, brcms_driver_init);
1286 
brcms_module_init(void)1287 static int __init brcms_module_init(void)
1288 {
1289 	brcms_debugfs_init();
1290 	if (!schedule_work(&brcms_driver_work))
1291 		return -EBUSY;
1292 
1293 	return 0;
1294 }
1295 
1296 /**
1297  * This function unloads the brcmsmac driver from the system.
1298  *
1299  * This function unconditionally unloads the brcmsmac driver module from the
1300  * system.
1301  *
1302  */
brcms_module_exit(void)1303 static void __exit brcms_module_exit(void)
1304 {
1305 	cancel_work_sync(&brcms_driver_work);
1306 	bcma_driver_unregister(&brcms_bcma_driver);
1307 	brcms_debugfs_exit();
1308 }
1309 
1310 module_init(brcms_module_init);
1311 module_exit(brcms_module_exit);
1312 
1313 /*
1314  * precondition: perimeter lock has been acquired
1315  */
brcms_txflowcontrol(struct brcms_info * wl,struct brcms_if * wlif,bool state,int prio)1316 void brcms_txflowcontrol(struct brcms_info *wl, struct brcms_if *wlif,
1317 			 bool state, int prio)
1318 {
1319 	brcms_err(wl->wlc->hw->d11core, "Shouldn't be here %s\n", __func__);
1320 }
1321 
1322 /*
1323  * precondition: perimeter lock has been acquired
1324  */
brcms_init(struct brcms_info * wl)1325 void brcms_init(struct brcms_info *wl)
1326 {
1327 	brcms_dbg_info(wl->wlc->hw->d11core, "Initializing wl%d\n",
1328 		       wl->pub->unit);
1329 	brcms_reset(wl);
1330 	brcms_c_init(wl->wlc, wl->mute_tx);
1331 }
1332 
1333 /*
1334  * precondition: perimeter lock has been acquired
1335  */
brcms_reset(struct brcms_info * wl)1336 uint brcms_reset(struct brcms_info *wl)
1337 {
1338 	brcms_dbg_info(wl->wlc->hw->d11core, "Resetting wl%d\n", wl->pub->unit);
1339 	brcms_c_reset(wl->wlc);
1340 
1341 	/* dpc will not be rescheduled */
1342 	wl->resched = false;
1343 
1344 	/* inform publicly that interface is down */
1345 	wl->pub->up = false;
1346 
1347 	return 0;
1348 }
1349 
brcms_fatal_error(struct brcms_info * wl)1350 void brcms_fatal_error(struct brcms_info *wl)
1351 {
1352 	brcms_err(wl->wlc->hw->d11core, "wl%d: fatal error, reinitializing\n",
1353 		  wl->wlc->pub->unit);
1354 	brcms_reset(wl);
1355 	ieee80211_restart_hw(wl->pub->ieee_hw);
1356 }
1357 
1358 /*
1359  * These are interrupt on/off entry points. Disable interrupts
1360  * during interrupt state transition.
1361  */
brcms_intrson(struct brcms_info * wl)1362 void brcms_intrson(struct brcms_info *wl)
1363 {
1364 	unsigned long flags;
1365 
1366 	spin_lock_irqsave(&wl->isr_lock, flags);
1367 	brcms_c_intrson(wl->wlc);
1368 	spin_unlock_irqrestore(&wl->isr_lock, flags);
1369 }
1370 
brcms_intrsoff(struct brcms_info * wl)1371 u32 brcms_intrsoff(struct brcms_info *wl)
1372 {
1373 	unsigned long flags;
1374 	u32 status;
1375 
1376 	spin_lock_irqsave(&wl->isr_lock, flags);
1377 	status = brcms_c_intrsoff(wl->wlc);
1378 	spin_unlock_irqrestore(&wl->isr_lock, flags);
1379 	return status;
1380 }
1381 
brcms_intrsrestore(struct brcms_info * wl,u32 macintmask)1382 void brcms_intrsrestore(struct brcms_info *wl, u32 macintmask)
1383 {
1384 	unsigned long flags;
1385 
1386 	spin_lock_irqsave(&wl->isr_lock, flags);
1387 	brcms_c_intrsrestore(wl->wlc, macintmask);
1388 	spin_unlock_irqrestore(&wl->isr_lock, flags);
1389 }
1390 
1391 /*
1392  * precondition: perimeter lock has been acquired
1393  */
brcms_up(struct brcms_info * wl)1394 int brcms_up(struct brcms_info *wl)
1395 {
1396 	int error = 0;
1397 
1398 	if (wl->pub->up)
1399 		return 0;
1400 
1401 	error = brcms_c_up(wl->wlc);
1402 
1403 	return error;
1404 }
1405 
1406 /*
1407  * precondition: perimeter lock has been acquired
1408  */
brcms_down(struct brcms_info * wl)1409 void brcms_down(struct brcms_info *wl)
1410 {
1411 	uint callbacks, ret_val = 0;
1412 
1413 	/* call common down function */
1414 	ret_val = brcms_c_down(wl->wlc);
1415 	callbacks = atomic_read(&wl->callbacks) - ret_val;
1416 
1417 	/* wait for down callbacks to complete */
1418 	spin_unlock_bh(&wl->lock);
1419 
1420 	/* For HIGH_only driver, it's important to actually schedule other work,
1421 	 * not just spin wait since everything runs at schedule level
1422 	 */
1423 	SPINWAIT((atomic_read(&wl->callbacks) > callbacks), 100 * 1000);
1424 
1425 	spin_lock_bh(&wl->lock);
1426 }
1427 
1428 /*
1429 * precondition: perimeter lock is not acquired
1430  */
_brcms_timer(struct work_struct * work)1431 static void _brcms_timer(struct work_struct *work)
1432 {
1433 	struct brcms_timer *t = container_of(work, struct brcms_timer,
1434 					     dly_wrk.work);
1435 
1436 	spin_lock_bh(&t->wl->lock);
1437 
1438 	if (t->set) {
1439 		if (t->periodic) {
1440 			atomic_inc(&t->wl->callbacks);
1441 			ieee80211_queue_delayed_work(t->wl->pub->ieee_hw,
1442 						     &t->dly_wrk,
1443 						     msecs_to_jiffies(t->ms));
1444 		} else {
1445 			t->set = false;
1446 		}
1447 
1448 		t->fn(t->arg);
1449 	}
1450 
1451 	atomic_dec(&t->wl->callbacks);
1452 
1453 	spin_unlock_bh(&t->wl->lock);
1454 }
1455 
1456 /*
1457  * Adds a timer to the list. Caller supplies a timer function.
1458  * Is called from wlc.
1459  *
1460  * precondition: perimeter lock has been acquired
1461  */
brcms_init_timer(struct brcms_info * wl,void (* fn)(void * arg),void * arg,const char * name)1462 struct brcms_timer *brcms_init_timer(struct brcms_info *wl,
1463 				     void (*fn) (void *arg),
1464 				     void *arg, const char *name)
1465 {
1466 	struct brcms_timer *t;
1467 
1468 	t = kzalloc(sizeof(struct brcms_timer), GFP_ATOMIC);
1469 	if (!t)
1470 		return NULL;
1471 
1472 	INIT_DELAYED_WORK(&t->dly_wrk, _brcms_timer);
1473 	t->wl = wl;
1474 	t->fn = fn;
1475 	t->arg = arg;
1476 	t->next = wl->timers;
1477 	wl->timers = t;
1478 
1479 #ifdef DEBUG
1480 	t->name = kmalloc(strlen(name) + 1, GFP_ATOMIC);
1481 	if (t->name)
1482 		strcpy(t->name, name);
1483 #endif
1484 
1485 	return t;
1486 }
1487 
1488 /*
1489  * adds only the kernel timer since it's going to be more accurate
1490  * as well as it's easier to make it periodic
1491  *
1492  * precondition: perimeter lock has been acquired
1493  */
brcms_add_timer(struct brcms_timer * t,uint ms,int periodic)1494 void brcms_add_timer(struct brcms_timer *t, uint ms, int periodic)
1495 {
1496 	struct ieee80211_hw *hw = t->wl->pub->ieee_hw;
1497 
1498 #ifdef DEBUG
1499 	if (t->set)
1500 		brcms_dbg_info(t->wl->wlc->hw->d11core,
1501 			       "%s: Already set. Name: %s, per %d\n",
1502 			       __func__, t->name, periodic);
1503 #endif
1504 	t->ms = ms;
1505 	t->periodic = (bool) periodic;
1506 	if (!t->set) {
1507 		t->set = true;
1508 		atomic_inc(&t->wl->callbacks);
1509 	}
1510 
1511 	ieee80211_queue_delayed_work(hw, &t->dly_wrk, msecs_to_jiffies(ms));
1512 }
1513 
1514 /*
1515  * return true if timer successfully deleted, false if still pending
1516  *
1517  * precondition: perimeter lock has been acquired
1518  */
brcms_del_timer(struct brcms_timer * t)1519 bool brcms_del_timer(struct brcms_timer *t)
1520 {
1521 	if (t->set) {
1522 		t->set = false;
1523 		if (!cancel_delayed_work(&t->dly_wrk))
1524 			return false;
1525 
1526 		atomic_dec(&t->wl->callbacks);
1527 	}
1528 
1529 	return true;
1530 }
1531 
1532 /*
1533  * precondition: perimeter lock has been acquired
1534  */
brcms_free_timer(struct brcms_timer * t)1535 void brcms_free_timer(struct brcms_timer *t)
1536 {
1537 	struct brcms_info *wl = t->wl;
1538 	struct brcms_timer *tmp;
1539 
1540 	/* delete the timer in case it is active */
1541 	brcms_del_timer(t);
1542 
1543 	if (wl->timers == t) {
1544 		wl->timers = wl->timers->next;
1545 #ifdef DEBUG
1546 		kfree(t->name);
1547 #endif
1548 		kfree(t);
1549 		return;
1550 
1551 	}
1552 
1553 	tmp = wl->timers;
1554 	while (tmp) {
1555 		if (tmp->next == t) {
1556 			tmp->next = t->next;
1557 #ifdef DEBUG
1558 			kfree(t->name);
1559 #endif
1560 			kfree(t);
1561 			return;
1562 		}
1563 		tmp = tmp->next;
1564 	}
1565 
1566 }
1567 
1568 /*
1569  * precondition: perimeter lock has been acquired
1570  */
brcms_ucode_init_buf(struct brcms_info * wl,void ** pbuf,u32 idx)1571 int brcms_ucode_init_buf(struct brcms_info *wl, void **pbuf, u32 idx)
1572 {
1573 	int i, entry;
1574 	const u8 *pdata;
1575 	struct firmware_hdr *hdr;
1576 	for (i = 0; i < wl->fw.fw_cnt; i++) {
1577 		hdr = (struct firmware_hdr *)wl->fw.fw_hdr[i]->data;
1578 		for (entry = 0; entry < wl->fw.hdr_num_entries[i];
1579 		     entry++, hdr++) {
1580 			u32 len = le32_to_cpu(hdr->len);
1581 			if (le32_to_cpu(hdr->idx) == idx) {
1582 				pdata = wl->fw.fw_bin[i]->data +
1583 					le32_to_cpu(hdr->offset);
1584 				*pbuf = kmemdup(pdata, len, GFP_ATOMIC);
1585 				if (*pbuf == NULL)
1586 					goto fail;
1587 
1588 				return 0;
1589 			}
1590 		}
1591 	}
1592 	brcms_err(wl->wlc->hw->d11core,
1593 		  "ERROR: ucode buf tag:%d can not be found!\n", idx);
1594 	*pbuf = NULL;
1595 fail:
1596 	return -ENODATA;
1597 }
1598 
1599 /*
1600  * Precondition: Since this function is called in brcms_bcma_probe() context,
1601  * no locking is required.
1602  */
brcms_ucode_init_uint(struct brcms_info * wl,size_t * n_bytes,u32 idx)1603 int brcms_ucode_init_uint(struct brcms_info *wl, size_t *n_bytes, u32 idx)
1604 {
1605 	int i, entry;
1606 	const u8 *pdata;
1607 	struct firmware_hdr *hdr;
1608 	for (i = 0; i < wl->fw.fw_cnt; i++) {
1609 		hdr = (struct firmware_hdr *)wl->fw.fw_hdr[i]->data;
1610 		for (entry = 0; entry < wl->fw.hdr_num_entries[i];
1611 		     entry++, hdr++) {
1612 			if (le32_to_cpu(hdr->idx) == idx) {
1613 				pdata = wl->fw.fw_bin[i]->data +
1614 					le32_to_cpu(hdr->offset);
1615 				if (le32_to_cpu(hdr->len) != 4) {
1616 					brcms_err(wl->wlc->hw->d11core,
1617 						  "ERROR: fw hdr len\n");
1618 					return -ENOMSG;
1619 				}
1620 				*n_bytes = le32_to_cpu(*((__le32 *) pdata));
1621 				return 0;
1622 			}
1623 		}
1624 	}
1625 	brcms_err(wl->wlc->hw->d11core,
1626 		  "ERROR: ucode tag:%d can not be found!\n", idx);
1627 	return -ENOMSG;
1628 }
1629 
1630 /*
1631  * precondition: can both be called locked and unlocked
1632  */
brcms_ucode_free_buf(void * p)1633 void brcms_ucode_free_buf(void *p)
1634 {
1635 	kfree(p);
1636 }
1637 
1638 /*
1639  * checks validity of all firmware images loaded from user space
1640  *
1641  * Precondition: Since this function is called in brcms_bcma_probe() context,
1642  * no locking is required.
1643  */
brcms_check_firmwares(struct brcms_info * wl)1644 int brcms_check_firmwares(struct brcms_info *wl)
1645 {
1646 	int i;
1647 	int entry;
1648 	int rc = 0;
1649 	const struct firmware *fw;
1650 	const struct firmware *fw_hdr;
1651 	struct firmware_hdr *ucode_hdr;
1652 	for (i = 0; i < MAX_FW_IMAGES && rc == 0; i++) {
1653 		fw =  wl->fw.fw_bin[i];
1654 		fw_hdr = wl->fw.fw_hdr[i];
1655 		if (fw == NULL && fw_hdr == NULL) {
1656 			break;
1657 		} else if (fw == NULL || fw_hdr == NULL) {
1658 			wiphy_err(wl->wiphy, "%s: invalid bin/hdr fw\n",
1659 				  __func__);
1660 			rc = -EBADF;
1661 		} else if (fw_hdr->size % sizeof(struct firmware_hdr)) {
1662 			wiphy_err(wl->wiphy, "%s: non integral fw hdr file "
1663 				"size %zu/%zu\n", __func__, fw_hdr->size,
1664 				sizeof(struct firmware_hdr));
1665 			rc = -EBADF;
1666 		} else if (fw->size < MIN_FW_SIZE || fw->size > MAX_FW_SIZE) {
1667 			wiphy_err(wl->wiphy, "%s: out of bounds fw file size %zu\n",
1668 				  __func__, fw->size);
1669 			rc = -EBADF;
1670 		} else {
1671 			/* check if ucode section overruns firmware image */
1672 			ucode_hdr = (struct firmware_hdr *)fw_hdr->data;
1673 			for (entry = 0; entry < wl->fw.hdr_num_entries[i] &&
1674 			     !rc; entry++, ucode_hdr++) {
1675 				if (le32_to_cpu(ucode_hdr->offset) +
1676 				    le32_to_cpu(ucode_hdr->len) >
1677 				    fw->size) {
1678 					wiphy_err(wl->wiphy,
1679 						  "%s: conflicting bin/hdr\n",
1680 						  __func__);
1681 					rc = -EBADF;
1682 				}
1683 			}
1684 		}
1685 	}
1686 	if (rc == 0 && wl->fw.fw_cnt != i) {
1687 		wiphy_err(wl->wiphy, "%s: invalid fw_cnt=%d\n", __func__,
1688 			wl->fw.fw_cnt);
1689 		rc = -EBADF;
1690 	}
1691 	return rc;
1692 }
1693 
1694 /*
1695  * precondition: perimeter lock has been acquired
1696  */
brcms_rfkill_set_hw_state(struct brcms_info * wl)1697 bool brcms_rfkill_set_hw_state(struct brcms_info *wl)
1698 {
1699 	bool blocked = brcms_c_check_radio_disabled(wl->wlc);
1700 
1701 	spin_unlock_bh(&wl->lock);
1702 	wiphy_rfkill_set_hw_state(wl->pub->ieee_hw->wiphy, blocked);
1703 	if (blocked)
1704 		wiphy_rfkill_start_polling(wl->pub->ieee_hw->wiphy);
1705 	spin_lock_bh(&wl->lock);
1706 	return blocked;
1707 }
1708