1 /*
2 * arch/m68k/q40/config.c
3 *
4 * Copyright (C) 1999 Richard Zidlicky
5 *
6 * originally based on:
7 *
8 * linux/bvme/config.c
9 *
10 * This file is subject to the terms and conditions of the GNU General Public
11 * License. See the file README.legal in the main directory of this archive
12 * for more details.
13 */
14
15 #include <linux/types.h>
16 #include <linux/kernel.h>
17 #include <linux/mm.h>
18 #include <linux/tty.h>
19 #include <linux/console.h>
20 #include <linux/linkage.h>
21 #include <linux/init.h>
22 #include <linux/major.h>
23 #include <linux/serial_reg.h>
24 #include <linux/rtc.h>
25 #include <linux/vt_kern.h>
26 #include <linux/bcd.h>
27 #include <linux/platform_device.h>
28
29 #include <asm/io.h>
30 #include <asm/rtc.h>
31 #include <asm/bootinfo.h>
32 #include <asm/pgtable.h>
33 #include <asm/setup.h>
34 #include <asm/irq.h>
35 #include <asm/traps.h>
36 #include <asm/machdep.h>
37 #include <asm/q40_master.h>
38
39 extern void q40_init_IRQ(void);
40 static void q40_get_model(char *model);
41 extern void q40_sched_init(irq_handler_t handler);
42
43 static u32 q40_gettimeoffset(void);
44 static int q40_hwclk(int, struct rtc_time *);
45 static unsigned int q40_get_ss(void);
46 static int q40_set_clock_mmss(unsigned long);
47 static int q40_get_rtc_pll(struct rtc_pll_info *pll);
48 static int q40_set_rtc_pll(struct rtc_pll_info *pll);
49
50 extern void q40_mksound(unsigned int /*freq*/, unsigned int /*ticks*/);
51
52 static void q40_mem_console_write(struct console *co, const char *b,
53 unsigned int count);
54
55 extern int ql_ticks;
56
57 static struct console q40_console_driver = {
58 .name = "debug",
59 .write = q40_mem_console_write,
60 .flags = CON_PRINTBUFFER,
61 .index = -1,
62 };
63
64
65 /* early debugging function:*/
66 extern char *q40_mem_cptr; /*=(char *)0xff020000;*/
67 static int _cpleft;
68
q40_mem_console_write(struct console * co,const char * s,unsigned int count)69 static void q40_mem_console_write(struct console *co, const char *s,
70 unsigned int count)
71 {
72 const char *p = s;
73
74 if (count < _cpleft) {
75 while (count-- > 0) {
76 *q40_mem_cptr = *p++;
77 q40_mem_cptr += 4;
78 _cpleft--;
79 }
80 }
81 }
82
q40_debug_setup(char * arg)83 static int __init q40_debug_setup(char *arg)
84 {
85 /* useful for early debugging stages - writes kernel messages into SRAM */
86 if (MACH_IS_Q40 && !strncmp(arg, "mem", 3)) {
87 /*printk("using NVRAM debug, q40_mem_cptr=%p\n",q40_mem_cptr);*/
88 _cpleft = 2000 - ((long)q40_mem_cptr-0xff020000) / 4;
89 register_console(&q40_console_driver);
90 }
91 return 0;
92 }
93
94 early_param("debug", q40_debug_setup);
95
96 #if 0
97 void printq40(char *str)
98 {
99 int l = strlen(str);
100 char *p = q40_mem_cptr;
101
102 while (l-- > 0 && _cpleft-- > 0) {
103 *p = *str++;
104 p += 4;
105 }
106 q40_mem_cptr = p;
107 }
108 #endif
109
110 static int halted;
111
112 #ifdef CONFIG_HEARTBEAT
q40_heartbeat(int on)113 static void q40_heartbeat(int on)
114 {
115 if (halted)
116 return;
117
118 if (on)
119 Q40_LED_ON();
120 else
121 Q40_LED_OFF();
122 }
123 #endif
124
q40_reset(void)125 static void q40_reset(void)
126 {
127 halted = 1;
128 printk("\n\n*******************************************\n"
129 "Called q40_reset : press the RESET button!!\n"
130 "*******************************************\n");
131 Q40_LED_ON();
132 while (1)
133 ;
134 }
135
q40_halt(void)136 static void q40_halt(void)
137 {
138 halted = 1;
139 printk("\n\n*******************\n"
140 " Called q40_halt\n"
141 "*******************\n");
142 Q40_LED_ON();
143 while (1)
144 ;
145 }
146
q40_get_model(char * model)147 static void q40_get_model(char *model)
148 {
149 sprintf(model, "Q40");
150 }
151
152 static unsigned int serports[] =
153 {
154 0x3f8,0x2f8,0x3e8,0x2e8,0
155 };
156
q40_disable_irqs(void)157 static void q40_disable_irqs(void)
158 {
159 unsigned i, j;
160
161 j = 0;
162 while ((i = serports[j++]))
163 outb(0, i + UART_IER);
164 master_outb(0, EXT_ENABLE_REG);
165 master_outb(0, KEY_IRQ_ENABLE_REG);
166 }
167
config_q40(void)168 void __init config_q40(void)
169 {
170 mach_sched_init = q40_sched_init;
171
172 mach_init_IRQ = q40_init_IRQ;
173 arch_gettimeoffset = q40_gettimeoffset;
174 mach_hwclk = q40_hwclk;
175 mach_get_ss = q40_get_ss;
176 mach_get_rtc_pll = q40_get_rtc_pll;
177 mach_set_rtc_pll = q40_set_rtc_pll;
178 mach_set_clock_mmss = q40_set_clock_mmss;
179
180 mach_reset = q40_reset;
181 mach_get_model = q40_get_model;
182
183 #if defined(CONFIG_INPUT_M68K_BEEP) || defined(CONFIG_INPUT_M68K_BEEP_MODULE)
184 mach_beep = q40_mksound;
185 #endif
186 #ifdef CONFIG_HEARTBEAT
187 mach_heartbeat = q40_heartbeat;
188 #endif
189 mach_halt = q40_halt;
190
191 /* disable a few things that SMSQ might have left enabled */
192 q40_disable_irqs();
193
194 /* no DMA at all, but ide-scsi requires it.. make sure
195 * all physical RAM fits into the boundary - otherwise
196 * allocator may play costly and useless tricks */
197 mach_max_dma_address = 1024*1024*1024;
198 }
199
200
q40_parse_bootinfo(const struct bi_record * rec)201 int q40_parse_bootinfo(const struct bi_record *rec)
202 {
203 return 1;
204 }
205
206
q40_gettimeoffset(void)207 static u32 q40_gettimeoffset(void)
208 {
209 return 5000 * (ql_ticks != 0) * 1000;
210 }
211
212
213 /*
214 * Looks like op is non-zero for setting the clock, and zero for
215 * reading the clock.
216 *
217 * struct hwclk_time {
218 * unsigned sec; 0..59
219 * unsigned min; 0..59
220 * unsigned hour; 0..23
221 * unsigned day; 1..31
222 * unsigned mon; 0..11
223 * unsigned year; 00...
224 * int wday; 0..6, 0 is Sunday, -1 means unknown/don't set
225 * };
226 */
227
q40_hwclk(int op,struct rtc_time * t)228 static int q40_hwclk(int op, struct rtc_time *t)
229 {
230 if (op) {
231 /* Write.... */
232 Q40_RTC_CTRL |= Q40_RTC_WRITE;
233
234 Q40_RTC_SECS = bin2bcd(t->tm_sec);
235 Q40_RTC_MINS = bin2bcd(t->tm_min);
236 Q40_RTC_HOUR = bin2bcd(t->tm_hour);
237 Q40_RTC_DATE = bin2bcd(t->tm_mday);
238 Q40_RTC_MNTH = bin2bcd(t->tm_mon + 1);
239 Q40_RTC_YEAR = bin2bcd(t->tm_year%100);
240 if (t->tm_wday >= 0)
241 Q40_RTC_DOW = bin2bcd(t->tm_wday+1);
242
243 Q40_RTC_CTRL &= ~(Q40_RTC_WRITE);
244 } else {
245 /* Read.... */
246 Q40_RTC_CTRL |= Q40_RTC_READ;
247
248 t->tm_year = bcd2bin (Q40_RTC_YEAR);
249 t->tm_mon = bcd2bin (Q40_RTC_MNTH)-1;
250 t->tm_mday = bcd2bin (Q40_RTC_DATE);
251 t->tm_hour = bcd2bin (Q40_RTC_HOUR);
252 t->tm_min = bcd2bin (Q40_RTC_MINS);
253 t->tm_sec = bcd2bin (Q40_RTC_SECS);
254
255 Q40_RTC_CTRL &= ~(Q40_RTC_READ);
256
257 if (t->tm_year < 70)
258 t->tm_year += 100;
259 t->tm_wday = bcd2bin(Q40_RTC_DOW)-1;
260 }
261
262 return 0;
263 }
264
q40_get_ss(void)265 static unsigned int q40_get_ss(void)
266 {
267 return bcd2bin(Q40_RTC_SECS);
268 }
269
270 /*
271 * Set the minutes and seconds from seconds value 'nowtime'. Fail if
272 * clock is out by > 30 minutes. Logic lifted from atari code.
273 */
274
q40_set_clock_mmss(unsigned long nowtime)275 static int q40_set_clock_mmss(unsigned long nowtime)
276 {
277 int retval = 0;
278 short real_seconds = nowtime % 60, real_minutes = (nowtime / 60) % 60;
279
280 int rtc_minutes;
281
282 rtc_minutes = bcd2bin(Q40_RTC_MINS);
283
284 if ((rtc_minutes < real_minutes ?
285 real_minutes - rtc_minutes :
286 rtc_minutes - real_minutes) < 30) {
287 Q40_RTC_CTRL |= Q40_RTC_WRITE;
288 Q40_RTC_MINS = bin2bcd(real_minutes);
289 Q40_RTC_SECS = bin2bcd(real_seconds);
290 Q40_RTC_CTRL &= ~(Q40_RTC_WRITE);
291 } else
292 retval = -1;
293
294 return retval;
295 }
296
297
298 /* get and set PLL calibration of RTC clock */
299 #define Q40_RTC_PLL_MASK ((1<<5)-1)
300 #define Q40_RTC_PLL_SIGN (1<<5)
301
q40_get_rtc_pll(struct rtc_pll_info * pll)302 static int q40_get_rtc_pll(struct rtc_pll_info *pll)
303 {
304 int tmp = Q40_RTC_CTRL;
305
306 pll->pll_value = tmp & Q40_RTC_PLL_MASK;
307 if (tmp & Q40_RTC_PLL_SIGN)
308 pll->pll_value = -pll->pll_value;
309 pll->pll_max = 31;
310 pll->pll_min = -31;
311 pll->pll_posmult = 512;
312 pll->pll_negmult = 256;
313 pll->pll_clock = 125829120;
314
315 return 0;
316 }
317
q40_set_rtc_pll(struct rtc_pll_info * pll)318 static int q40_set_rtc_pll(struct rtc_pll_info *pll)
319 {
320 if (!pll->pll_ctrl) {
321 /* the docs are a bit unclear so I am doublesetting */
322 /* RTC_WRITE here ... */
323 int tmp = (pll->pll_value & 31) | (pll->pll_value<0 ? 32 : 0) |
324 Q40_RTC_WRITE;
325 Q40_RTC_CTRL |= Q40_RTC_WRITE;
326 Q40_RTC_CTRL = tmp;
327 Q40_RTC_CTRL &= ~(Q40_RTC_WRITE);
328 return 0;
329 } else
330 return -EINVAL;
331 }
332
q40_add_kbd_device(void)333 static __init int q40_add_kbd_device(void)
334 {
335 struct platform_device *pdev;
336
337 if (!MACH_IS_Q40)
338 return -ENODEV;
339
340 pdev = platform_device_register_simple("q40kbd", -1, NULL, 0);
341 return PTR_RET(pdev);
342 }
343 arch_initcall(q40_add_kbd_device);
344