1 /*
2 * This module provides common API for accessing firmware configuration pages
3 *
4 * This code is based on drivers/scsi/mpt2sas/mpt2_base.c
5 * Copyright (C) 2007-2012 LSI Corporation
6 * (mailto:DL-MPTFusionLinux@lsi.com)
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License
10 * as published by the Free Software Foundation; either version 2
11 * of the License, or (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 *
18 * NO WARRANTY
19 * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
20 * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
21 * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
22 * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
23 * solely responsible for determining the appropriateness of using and
24 * distributing the Program and assumes all risks associated with its
25 * exercise of rights under this Agreement, including but not limited to
26 * the risks and costs of program errors, damage to or loss of data,
27 * programs or equipment, and unavailability or interruption of operations.
28
29 * DISCLAIMER OF LIABILITY
30 * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
31 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
32 * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
33 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
34 * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
35 * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
36 * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
37
38 * You should have received a copy of the GNU General Public License
39 * along with this program; if not, write to the Free Software
40 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
41 * USA.
42 */
43
44 #include <linux/module.h>
45 #include <linux/kernel.h>
46 #include <linux/init.h>
47 #include <linux/errno.h>
48 #include <linux/blkdev.h>
49 #include <linux/sched.h>
50 #include <linux/workqueue.h>
51 #include <linux/delay.h>
52 #include <linux/pci.h>
53 #include <linux/slab.h>
54
55 #include "mpt2sas_base.h"
56
57 /* local definitions */
58
59 /* Timeout for config page request (in seconds) */
60 #define MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT 15
61
62 /* Common sgl flags for READING a config page. */
63 #define MPT2_CONFIG_COMMON_SGLFLAGS ((MPI2_SGE_FLAGS_SIMPLE_ELEMENT | \
64 MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER \
65 | MPI2_SGE_FLAGS_END_OF_LIST) << MPI2_SGE_FLAGS_SHIFT)
66
67 /* Common sgl flags for WRITING a config page. */
68 #define MPT2_CONFIG_COMMON_WRITE_SGLFLAGS ((MPI2_SGE_FLAGS_SIMPLE_ELEMENT | \
69 MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER \
70 | MPI2_SGE_FLAGS_END_OF_LIST | MPI2_SGE_FLAGS_HOST_TO_IOC) \
71 << MPI2_SGE_FLAGS_SHIFT)
72
73 /**
74 * struct config_request - obtain dma memory via routine
75 * @sz: size
76 * @page: virt pointer
77 * @page_dma: phys pointer
78 *
79 */
80 struct config_request{
81 u16 sz;
82 void *page;
83 dma_addr_t page_dma;
84 };
85
86 #ifdef CONFIG_SCSI_MPT2SAS_LOGGING
87 /**
88 * _config_display_some_debug - debug routine
89 * @ioc: per adapter object
90 * @smid: system request message index
91 * @calling_function_name: string pass from calling function
92 * @mpi_reply: reply message frame
93 * Context: none.
94 *
95 * Function for displaying debug info helpful when debugging issues
96 * in this module.
97 */
98 static void
_config_display_some_debug(struct MPT2SAS_ADAPTER * ioc,u16 smid,char * calling_function_name,MPI2DefaultReply_t * mpi_reply)99 _config_display_some_debug(struct MPT2SAS_ADAPTER *ioc, u16 smid,
100 char *calling_function_name, MPI2DefaultReply_t *mpi_reply)
101 {
102 Mpi2ConfigRequest_t *mpi_request;
103 char *desc = NULL;
104
105 if (!(ioc->logging_level & MPT_DEBUG_CONFIG))
106 return;
107
108 mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
109 switch (mpi_request->Header.PageType & MPI2_CONFIG_PAGETYPE_MASK) {
110 case MPI2_CONFIG_PAGETYPE_IO_UNIT:
111 desc = "io_unit";
112 break;
113 case MPI2_CONFIG_PAGETYPE_IOC:
114 desc = "ioc";
115 break;
116 case MPI2_CONFIG_PAGETYPE_BIOS:
117 desc = "bios";
118 break;
119 case MPI2_CONFIG_PAGETYPE_RAID_VOLUME:
120 desc = "raid_volume";
121 break;
122 case MPI2_CONFIG_PAGETYPE_MANUFACTURING:
123 desc = "manufaucturing";
124 break;
125 case MPI2_CONFIG_PAGETYPE_RAID_PHYSDISK:
126 desc = "physdisk";
127 break;
128 case MPI2_CONFIG_PAGETYPE_EXTENDED:
129 switch (mpi_request->ExtPageType) {
130 case MPI2_CONFIG_EXTPAGETYPE_SAS_IO_UNIT:
131 desc = "sas_io_unit";
132 break;
133 case MPI2_CONFIG_EXTPAGETYPE_SAS_EXPANDER:
134 desc = "sas_expander";
135 break;
136 case MPI2_CONFIG_EXTPAGETYPE_SAS_DEVICE:
137 desc = "sas_device";
138 break;
139 case MPI2_CONFIG_EXTPAGETYPE_SAS_PHY:
140 desc = "sas_phy";
141 break;
142 case MPI2_CONFIG_EXTPAGETYPE_LOG:
143 desc = "log";
144 break;
145 case MPI2_CONFIG_EXTPAGETYPE_ENCLOSURE:
146 desc = "enclosure";
147 break;
148 case MPI2_CONFIG_EXTPAGETYPE_RAID_CONFIG:
149 desc = "raid_config";
150 break;
151 case MPI2_CONFIG_EXTPAGETYPE_DRIVER_MAPPING:
152 desc = "driver_mapping";
153 break;
154 }
155 break;
156 }
157
158 if (!desc)
159 return;
160
161 printk(MPT2SAS_INFO_FMT "%s: %s(%d), action(%d), form(0x%08x), "
162 "smid(%d)\n", ioc->name, calling_function_name, desc,
163 mpi_request->Header.PageNumber, mpi_request->Action,
164 le32_to_cpu(mpi_request->PageAddress), smid);
165
166 if (!mpi_reply)
167 return;
168
169 if (mpi_reply->IOCStatus || mpi_reply->IOCLogInfo)
170 printk(MPT2SAS_INFO_FMT
171 "\tiocstatus(0x%04x), loginfo(0x%08x)\n",
172 ioc->name, le16_to_cpu(mpi_reply->IOCStatus),
173 le32_to_cpu(mpi_reply->IOCLogInfo));
174 }
175 #endif
176
177 /**
178 * _config_alloc_config_dma_memory - obtain physical memory
179 * @ioc: per adapter object
180 * @mem: struct config_request
181 *
182 * A wrapper for obtaining dma-able memory for config page request.
183 *
184 * Returns 0 for success, non-zero for failure.
185 */
186 static int
_config_alloc_config_dma_memory(struct MPT2SAS_ADAPTER * ioc,struct config_request * mem)187 _config_alloc_config_dma_memory(struct MPT2SAS_ADAPTER *ioc,
188 struct config_request *mem)
189 {
190 int r = 0;
191
192 if (mem->sz > ioc->config_page_sz) {
193 mem->page = dma_alloc_coherent(&ioc->pdev->dev, mem->sz,
194 &mem->page_dma, GFP_KERNEL);
195 if (!mem->page) {
196 printk(MPT2SAS_ERR_FMT "%s: dma_alloc_coherent"
197 " failed asking for (%d) bytes!!\n",
198 ioc->name, __func__, mem->sz);
199 r = -ENOMEM;
200 }
201 } else { /* use tmp buffer if less than 512 bytes */
202 mem->page = ioc->config_page;
203 mem->page_dma = ioc->config_page_dma;
204 }
205 return r;
206 }
207
208 /**
209 * _config_free_config_dma_memory - wrapper to free the memory
210 * @ioc: per adapter object
211 * @mem: struct config_request
212 *
213 * A wrapper to free dma-able memory when using _config_alloc_config_dma_memory.
214 *
215 * Returns 0 for success, non-zero for failure.
216 */
217 static void
_config_free_config_dma_memory(struct MPT2SAS_ADAPTER * ioc,struct config_request * mem)218 _config_free_config_dma_memory(struct MPT2SAS_ADAPTER *ioc,
219 struct config_request *mem)
220 {
221 if (mem->sz > ioc->config_page_sz)
222 dma_free_coherent(&ioc->pdev->dev, mem->sz, mem->page,
223 mem->page_dma);
224 }
225
226 /**
227 * mpt2sas_config_done - config page completion routine
228 * @ioc: per adapter object
229 * @smid: system request message index
230 * @msix_index: MSIX table index supplied by the OS
231 * @reply: reply message frame(lower 32bit addr)
232 * Context: none.
233 *
234 * The callback handler when using _config_request.
235 *
236 * Return 1 meaning mf should be freed from _base_interrupt
237 * 0 means the mf is freed from this function.
238 */
239 u8
mpt2sas_config_done(struct MPT2SAS_ADAPTER * ioc,u16 smid,u8 msix_index,u32 reply)240 mpt2sas_config_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
241 u32 reply)
242 {
243 MPI2DefaultReply_t *mpi_reply;
244
245 if (ioc->config_cmds.status == MPT2_CMD_NOT_USED)
246 return 1;
247 if (ioc->config_cmds.smid != smid)
248 return 1;
249 ioc->config_cmds.status |= MPT2_CMD_COMPLETE;
250 mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply);
251 if (mpi_reply) {
252 ioc->config_cmds.status |= MPT2_CMD_REPLY_VALID;
253 memcpy(ioc->config_cmds.reply, mpi_reply,
254 mpi_reply->MsgLength*4);
255 }
256 ioc->config_cmds.status &= ~MPT2_CMD_PENDING;
257 #ifdef CONFIG_SCSI_MPT2SAS_LOGGING
258 _config_display_some_debug(ioc, smid, "config_done", mpi_reply);
259 #endif
260 ioc->config_cmds.smid = USHRT_MAX;
261 complete(&ioc->config_cmds.done);
262 return 1;
263 }
264
265 /**
266 * _config_request - main routine for sending config page requests
267 * @ioc: per adapter object
268 * @mpi_request: request message frame
269 * @mpi_reply: reply mf payload returned from firmware
270 * @timeout: timeout in seconds
271 * @config_page: contents of the config page
272 * @config_page_sz: size of config page
273 * Context: sleep
274 *
275 * A generic API for config page requests to firmware.
276 *
277 * The ioc->config_cmds.status flag should be MPT2_CMD_NOT_USED before calling
278 * this API.
279 *
280 * The callback index is set inside `ioc->config_cb_idx.
281 *
282 * Returns 0 for success, non-zero for failure.
283 */
284 static int
_config_request(struct MPT2SAS_ADAPTER * ioc,Mpi2ConfigRequest_t * mpi_request,Mpi2ConfigReply_t * mpi_reply,int timeout,void * config_page,u16 config_page_sz)285 _config_request(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigRequest_t
286 *mpi_request, Mpi2ConfigReply_t *mpi_reply, int timeout,
287 void *config_page, u16 config_page_sz)
288 {
289 u16 smid;
290 u32 ioc_state;
291 unsigned long timeleft;
292 Mpi2ConfigRequest_t *config_request;
293 int r;
294 u8 retry_count, issue_host_reset = 0;
295 u16 wait_state_count;
296 struct config_request mem;
297
298 mutex_lock(&ioc->config_cmds.mutex);
299 if (ioc->config_cmds.status != MPT2_CMD_NOT_USED) {
300 printk(MPT2SAS_ERR_FMT "%s: config_cmd in use\n",
301 ioc->name, __func__);
302 mutex_unlock(&ioc->config_cmds.mutex);
303 return -EAGAIN;
304 }
305
306 retry_count = 0;
307 memset(&mem, 0, sizeof(struct config_request));
308
309 mpi_request->VF_ID = 0; /* TODO */
310 mpi_request->VP_ID = 0;
311
312 if (config_page) {
313 mpi_request->Header.PageVersion = mpi_reply->Header.PageVersion;
314 mpi_request->Header.PageNumber = mpi_reply->Header.PageNumber;
315 mpi_request->Header.PageType = mpi_reply->Header.PageType;
316 mpi_request->Header.PageLength = mpi_reply->Header.PageLength;
317 mpi_request->ExtPageLength = mpi_reply->ExtPageLength;
318 mpi_request->ExtPageType = mpi_reply->ExtPageType;
319 if (mpi_request->Header.PageLength)
320 mem.sz = mpi_request->Header.PageLength * 4;
321 else
322 mem.sz = le16_to_cpu(mpi_reply->ExtPageLength) * 4;
323 r = _config_alloc_config_dma_memory(ioc, &mem);
324 if (r != 0)
325 goto out;
326 if (mpi_request->Action ==
327 MPI2_CONFIG_ACTION_PAGE_WRITE_CURRENT ||
328 mpi_request->Action ==
329 MPI2_CONFIG_ACTION_PAGE_WRITE_NVRAM) {
330 ioc->base_add_sg_single(&mpi_request->PageBufferSGE,
331 MPT2_CONFIG_COMMON_WRITE_SGLFLAGS | mem.sz,
332 mem.page_dma);
333 memcpy(mem.page, config_page, min_t(u16, mem.sz,
334 config_page_sz));
335 } else {
336 memset(config_page, 0, config_page_sz);
337 ioc->base_add_sg_single(&mpi_request->PageBufferSGE,
338 MPT2_CONFIG_COMMON_SGLFLAGS | mem.sz, mem.page_dma);
339 }
340 }
341
342 retry_config:
343 if (retry_count) {
344 if (retry_count > 2) { /* attempt only 2 retries */
345 r = -EFAULT;
346 goto free_mem;
347 }
348 printk(MPT2SAS_INFO_FMT "%s: attempting retry (%d)\n",
349 ioc->name, __func__, retry_count);
350 }
351 wait_state_count = 0;
352 ioc_state = mpt2sas_base_get_iocstate(ioc, 1);
353 while (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
354 if (wait_state_count++ == MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT) {
355 printk(MPT2SAS_ERR_FMT
356 "%s: failed due to ioc not operational\n",
357 ioc->name, __func__);
358 ioc->config_cmds.status = MPT2_CMD_NOT_USED;
359 r = -EFAULT;
360 goto free_mem;
361 }
362 ssleep(1);
363 ioc_state = mpt2sas_base_get_iocstate(ioc, 1);
364 printk(MPT2SAS_INFO_FMT "%s: waiting for "
365 "operational state(count=%d)\n", ioc->name,
366 __func__, wait_state_count);
367 }
368 if (wait_state_count)
369 printk(MPT2SAS_INFO_FMT "%s: ioc is operational\n",
370 ioc->name, __func__);
371
372 smid = mpt2sas_base_get_smid(ioc, ioc->config_cb_idx);
373 if (!smid) {
374 printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
375 ioc->name, __func__);
376 ioc->config_cmds.status = MPT2_CMD_NOT_USED;
377 r = -EAGAIN;
378 goto free_mem;
379 }
380
381 r = 0;
382 memset(mpi_reply, 0, sizeof(Mpi2ConfigReply_t));
383 ioc->config_cmds.status = MPT2_CMD_PENDING;
384 config_request = mpt2sas_base_get_msg_frame(ioc, smid);
385 ioc->config_cmds.smid = smid;
386 memcpy(config_request, mpi_request, sizeof(Mpi2ConfigRequest_t));
387 #ifdef CONFIG_SCSI_MPT2SAS_LOGGING
388 _config_display_some_debug(ioc, smid, "config_request", NULL);
389 #endif
390 init_completion(&ioc->config_cmds.done);
391 mpt2sas_base_put_smid_default(ioc, smid);
392 timeleft = wait_for_completion_timeout(&ioc->config_cmds.done,
393 timeout*HZ);
394 if (!(ioc->config_cmds.status & MPT2_CMD_COMPLETE)) {
395 printk(MPT2SAS_ERR_FMT "%s: timeout\n",
396 ioc->name, __func__);
397 _debug_dump_mf(mpi_request,
398 sizeof(Mpi2ConfigRequest_t)/4);
399 retry_count++;
400 if (ioc->config_cmds.smid == smid)
401 mpt2sas_base_free_smid(ioc, smid);
402 if ((ioc->shost_recovery) || (ioc->config_cmds.status &
403 MPT2_CMD_RESET) || ioc->pci_error_recovery)
404 goto retry_config;
405 issue_host_reset = 1;
406 r = -EFAULT;
407 goto free_mem;
408 }
409
410 if (ioc->config_cmds.status & MPT2_CMD_REPLY_VALID)
411 memcpy(mpi_reply, ioc->config_cmds.reply,
412 sizeof(Mpi2ConfigReply_t));
413 if (retry_count)
414 printk(MPT2SAS_INFO_FMT "%s: retry (%d) completed!!\n",
415 ioc->name, __func__, retry_count);
416 if (config_page && mpi_request->Action ==
417 MPI2_CONFIG_ACTION_PAGE_READ_CURRENT)
418 memcpy(config_page, mem.page, min_t(u16, mem.sz,
419 config_page_sz));
420 free_mem:
421 if (config_page)
422 _config_free_config_dma_memory(ioc, &mem);
423 out:
424 ioc->config_cmds.status = MPT2_CMD_NOT_USED;
425 mutex_unlock(&ioc->config_cmds.mutex);
426
427 if (issue_host_reset)
428 mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP,
429 FORCE_BIG_HAMMER);
430 return r;
431 }
432
433 /**
434 * mpt2sas_config_get_manufacturing_pg0 - obtain manufacturing page 0
435 * @ioc: per adapter object
436 * @mpi_reply: reply mf payload returned from firmware
437 * @config_page: contents of the config page
438 * Context: sleep.
439 *
440 * Returns 0 for success, non-zero for failure.
441 */
442 int
mpt2sas_config_get_manufacturing_pg0(struct MPT2SAS_ADAPTER * ioc,Mpi2ConfigReply_t * mpi_reply,Mpi2ManufacturingPage0_t * config_page)443 mpt2sas_config_get_manufacturing_pg0(struct MPT2SAS_ADAPTER *ioc,
444 Mpi2ConfigReply_t *mpi_reply, Mpi2ManufacturingPage0_t *config_page)
445 {
446 Mpi2ConfigRequest_t mpi_request;
447 int r;
448
449 memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
450 mpi_request.Function = MPI2_FUNCTION_CONFIG;
451 mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
452 mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_MANUFACTURING;
453 mpi_request.Header.PageNumber = 0;
454 mpi_request.Header.PageVersion = MPI2_MANUFACTURING0_PAGEVERSION;
455 mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE);
456 r = _config_request(ioc, &mpi_request, mpi_reply,
457 MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
458 if (r)
459 goto out;
460
461 mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
462 r = _config_request(ioc, &mpi_request, mpi_reply,
463 MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
464 sizeof(*config_page));
465 out:
466 return r;
467 }
468
469 /**
470 * mpt2sas_config_get_manufacturing_pg10 - obtain manufacturing page 10
471 * @ioc: per adapter object
472 * @mpi_reply: reply mf payload returned from firmware
473 * @config_page: contents of the config page
474 * Context: sleep.
475 *
476 * Returns 0 for success, non-zero for failure.
477 */
478 int
mpt2sas_config_get_manufacturing_pg10(struct MPT2SAS_ADAPTER * ioc,Mpi2ConfigReply_t * mpi_reply,Mpi2ManufacturingPage10_t * config_page)479 mpt2sas_config_get_manufacturing_pg10(struct MPT2SAS_ADAPTER *ioc,
480 Mpi2ConfigReply_t *mpi_reply, Mpi2ManufacturingPage10_t *config_page)
481 {
482 Mpi2ConfigRequest_t mpi_request;
483 int r;
484
485 memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
486 mpi_request.Function = MPI2_FUNCTION_CONFIG;
487 mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
488 mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_MANUFACTURING;
489 mpi_request.Header.PageNumber = 10;
490 mpi_request.Header.PageVersion = MPI2_MANUFACTURING0_PAGEVERSION;
491 mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE);
492 r = _config_request(ioc, &mpi_request, mpi_reply,
493 MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
494 if (r)
495 goto out;
496
497 mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
498 r = _config_request(ioc, &mpi_request, mpi_reply,
499 MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
500 sizeof(*config_page));
501 out:
502 return r;
503 }
504
505 /**
506 * mpt2sas_config_get_bios_pg2 - obtain bios page 2
507 * @ioc: per adapter object
508 * @mpi_reply: reply mf payload returned from firmware
509 * @config_page: contents of the config page
510 * Context: sleep.
511 *
512 * Returns 0 for success, non-zero for failure.
513 */
514 int
mpt2sas_config_get_bios_pg2(struct MPT2SAS_ADAPTER * ioc,Mpi2ConfigReply_t * mpi_reply,Mpi2BiosPage2_t * config_page)515 mpt2sas_config_get_bios_pg2(struct MPT2SAS_ADAPTER *ioc,
516 Mpi2ConfigReply_t *mpi_reply, Mpi2BiosPage2_t *config_page)
517 {
518 Mpi2ConfigRequest_t mpi_request;
519 int r;
520
521 memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
522 mpi_request.Function = MPI2_FUNCTION_CONFIG;
523 mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
524 mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_BIOS;
525 mpi_request.Header.PageNumber = 2;
526 mpi_request.Header.PageVersion = MPI2_BIOSPAGE2_PAGEVERSION;
527 mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE);
528 r = _config_request(ioc, &mpi_request, mpi_reply,
529 MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
530 if (r)
531 goto out;
532
533 mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
534 r = _config_request(ioc, &mpi_request, mpi_reply,
535 MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
536 sizeof(*config_page));
537 out:
538 return r;
539 }
540
541 /**
542 * mpt2sas_config_get_bios_pg3 - obtain bios page 3
543 * @ioc: per adapter object
544 * @mpi_reply: reply mf payload returned from firmware
545 * @config_page: contents of the config page
546 * Context: sleep.
547 *
548 * Returns 0 for success, non-zero for failure.
549 */
550 int
mpt2sas_config_get_bios_pg3(struct MPT2SAS_ADAPTER * ioc,Mpi2ConfigReply_t * mpi_reply,Mpi2BiosPage3_t * config_page)551 mpt2sas_config_get_bios_pg3(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
552 *mpi_reply, Mpi2BiosPage3_t *config_page)
553 {
554 Mpi2ConfigRequest_t mpi_request;
555 int r;
556
557 memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
558 mpi_request.Function = MPI2_FUNCTION_CONFIG;
559 mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
560 mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_BIOS;
561 mpi_request.Header.PageNumber = 3;
562 mpi_request.Header.PageVersion = MPI2_BIOSPAGE3_PAGEVERSION;
563 mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE);
564 r = _config_request(ioc, &mpi_request, mpi_reply,
565 MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
566 if (r)
567 goto out;
568
569 mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
570 r = _config_request(ioc, &mpi_request, mpi_reply,
571 MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
572 sizeof(*config_page));
573 out:
574 return r;
575 }
576
577 /**
578 * mpt2sas_config_get_iounit_pg0 - obtain iounit page 0
579 * @ioc: per adapter object
580 * @mpi_reply: reply mf payload returned from firmware
581 * @config_page: contents of the config page
582 * Context: sleep.
583 *
584 * Returns 0 for success, non-zero for failure.
585 */
586 int
mpt2sas_config_get_iounit_pg0(struct MPT2SAS_ADAPTER * ioc,Mpi2ConfigReply_t * mpi_reply,Mpi2IOUnitPage0_t * config_page)587 mpt2sas_config_get_iounit_pg0(struct MPT2SAS_ADAPTER *ioc,
588 Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage0_t *config_page)
589 {
590 Mpi2ConfigRequest_t mpi_request;
591 int r;
592
593 memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
594 mpi_request.Function = MPI2_FUNCTION_CONFIG;
595 mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
596 mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_IO_UNIT;
597 mpi_request.Header.PageNumber = 0;
598 mpi_request.Header.PageVersion = MPI2_IOUNITPAGE0_PAGEVERSION;
599 mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE);
600 r = _config_request(ioc, &mpi_request, mpi_reply,
601 MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
602 if (r)
603 goto out;
604
605 mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
606 r = _config_request(ioc, &mpi_request, mpi_reply,
607 MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
608 sizeof(*config_page));
609 out:
610 return r;
611 }
612
613 /**
614 * mpt2sas_config_get_iounit_pg1 - obtain iounit page 1
615 * @ioc: per adapter object
616 * @mpi_reply: reply mf payload returned from firmware
617 * @config_page: contents of the config page
618 * Context: sleep.
619 *
620 * Returns 0 for success, non-zero for failure.
621 */
622 int
mpt2sas_config_get_iounit_pg1(struct MPT2SAS_ADAPTER * ioc,Mpi2ConfigReply_t * mpi_reply,Mpi2IOUnitPage1_t * config_page)623 mpt2sas_config_get_iounit_pg1(struct MPT2SAS_ADAPTER *ioc,
624 Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage1_t *config_page)
625 {
626 Mpi2ConfigRequest_t mpi_request;
627 int r;
628
629 memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
630 mpi_request.Function = MPI2_FUNCTION_CONFIG;
631 mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
632 mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_IO_UNIT;
633 mpi_request.Header.PageNumber = 1;
634 mpi_request.Header.PageVersion = MPI2_IOUNITPAGE1_PAGEVERSION;
635 mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE);
636 r = _config_request(ioc, &mpi_request, mpi_reply,
637 MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
638 if (r)
639 goto out;
640
641 mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
642 r = _config_request(ioc, &mpi_request, mpi_reply,
643 MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
644 sizeof(*config_page));
645 out:
646 return r;
647 }
648
649 /**
650 * mpt2sas_config_set_iounit_pg1 - set iounit page 1
651 * @ioc: per adapter object
652 * @mpi_reply: reply mf payload returned from firmware
653 * @config_page: contents of the config page
654 * Context: sleep.
655 *
656 * Returns 0 for success, non-zero for failure.
657 */
658 int
mpt2sas_config_set_iounit_pg1(struct MPT2SAS_ADAPTER * ioc,Mpi2ConfigReply_t * mpi_reply,Mpi2IOUnitPage1_t * config_page)659 mpt2sas_config_set_iounit_pg1(struct MPT2SAS_ADAPTER *ioc,
660 Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage1_t *config_page)
661 {
662 Mpi2ConfigRequest_t mpi_request;
663 int r;
664
665 memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
666 mpi_request.Function = MPI2_FUNCTION_CONFIG;
667 mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
668 mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_IO_UNIT;
669 mpi_request.Header.PageNumber = 1;
670 mpi_request.Header.PageVersion = MPI2_IOUNITPAGE1_PAGEVERSION;
671 mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE);
672 r = _config_request(ioc, &mpi_request, mpi_reply,
673 MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
674 if (r)
675 goto out;
676
677 mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_WRITE_CURRENT;
678 r = _config_request(ioc, &mpi_request, mpi_reply,
679 MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
680 sizeof(*config_page));
681 out:
682 return r;
683 }
684
685 /**
686 * mpt2sas_config_get_iounit_pg3 - obtain iounit page 3
687 * @ioc: per adapter object
688 * @mpi_reply: reply mf payload returned from firmware
689 * @config_page: contents of the config page
690 * @sz: size of buffer passed in config_page
691 * Context: sleep.
692 *
693 * Returns 0 for success, non-zero for failure.
694 */
695 int
mpt2sas_config_get_iounit_pg3(struct MPT2SAS_ADAPTER * ioc,Mpi2ConfigReply_t * mpi_reply,Mpi2IOUnitPage3_t * config_page,u16 sz)696 mpt2sas_config_get_iounit_pg3(struct MPT2SAS_ADAPTER *ioc,
697 Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage3_t *config_page, u16 sz)
698 {
699 Mpi2ConfigRequest_t mpi_request;
700 int r;
701
702 memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
703 mpi_request.Function = MPI2_FUNCTION_CONFIG;
704 mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
705 mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_IO_UNIT;
706 mpi_request.Header.PageNumber = 3;
707 mpi_request.Header.PageVersion = MPI2_IOUNITPAGE3_PAGEVERSION;
708 mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE);
709 r = _config_request(ioc, &mpi_request, mpi_reply,
710 MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
711 if (r)
712 goto out;
713
714 mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
715 r = _config_request(ioc, &mpi_request, mpi_reply,
716 MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, sz);
717 out:
718 return r;
719 }
720
721 /**
722 * mpt2sas_config_get_ioc_pg8 - obtain ioc page 8
723 * @ioc: per adapter object
724 * @mpi_reply: reply mf payload returned from firmware
725 * @config_page: contents of the config page
726 * Context: sleep.
727 *
728 * Returns 0 for success, non-zero for failure.
729 */
730 int
mpt2sas_config_get_ioc_pg8(struct MPT2SAS_ADAPTER * ioc,Mpi2ConfigReply_t * mpi_reply,Mpi2IOCPage8_t * config_page)731 mpt2sas_config_get_ioc_pg8(struct MPT2SAS_ADAPTER *ioc,
732 Mpi2ConfigReply_t *mpi_reply, Mpi2IOCPage8_t *config_page)
733 {
734 Mpi2ConfigRequest_t mpi_request;
735 int r;
736
737 memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
738 mpi_request.Function = MPI2_FUNCTION_CONFIG;
739 mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
740 mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_IOC;
741 mpi_request.Header.PageNumber = 8;
742 mpi_request.Header.PageVersion = MPI2_IOCPAGE8_PAGEVERSION;
743 mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE);
744 r = _config_request(ioc, &mpi_request, mpi_reply,
745 MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
746 if (r)
747 goto out;
748
749 mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
750 r = _config_request(ioc, &mpi_request, mpi_reply,
751 MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
752 sizeof(*config_page));
753 out:
754 return r;
755 }
756
757 /**
758 * mpt2sas_config_get_sas_device_pg0 - obtain sas device page 0
759 * @ioc: per adapter object
760 * @mpi_reply: reply mf payload returned from firmware
761 * @config_page: contents of the config page
762 * @form: GET_NEXT_HANDLE or HANDLE
763 * @handle: device handle
764 * Context: sleep.
765 *
766 * Returns 0 for success, non-zero for failure.
767 */
768 int
mpt2sas_config_get_sas_device_pg0(struct MPT2SAS_ADAPTER * ioc,Mpi2ConfigReply_t * mpi_reply,Mpi2SasDevicePage0_t * config_page,u32 form,u32 handle)769 mpt2sas_config_get_sas_device_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
770 *mpi_reply, Mpi2SasDevicePage0_t *config_page, u32 form, u32 handle)
771 {
772 Mpi2ConfigRequest_t mpi_request;
773 int r;
774
775 memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
776 mpi_request.Function = MPI2_FUNCTION_CONFIG;
777 mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
778 mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
779 mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_DEVICE;
780 mpi_request.Header.PageVersion = MPI2_SASDEVICE0_PAGEVERSION;
781 mpi_request.Header.PageNumber = 0;
782 mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE);
783 r = _config_request(ioc, &mpi_request, mpi_reply,
784 MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
785 if (r)
786 goto out;
787
788 mpi_request.PageAddress = cpu_to_le32(form | handle);
789 mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
790 r = _config_request(ioc, &mpi_request, mpi_reply,
791 MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
792 sizeof(*config_page));
793 out:
794 return r;
795 }
796
797 /**
798 * mpt2sas_config_get_sas_device_pg1 - obtain sas device page 1
799 * @ioc: per adapter object
800 * @mpi_reply: reply mf payload returned from firmware
801 * @config_page: contents of the config page
802 * @form: GET_NEXT_HANDLE or HANDLE
803 * @handle: device handle
804 * Context: sleep.
805 *
806 * Returns 0 for success, non-zero for failure.
807 */
808 int
mpt2sas_config_get_sas_device_pg1(struct MPT2SAS_ADAPTER * ioc,Mpi2ConfigReply_t * mpi_reply,Mpi2SasDevicePage1_t * config_page,u32 form,u32 handle)809 mpt2sas_config_get_sas_device_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
810 *mpi_reply, Mpi2SasDevicePage1_t *config_page, u32 form, u32 handle)
811 {
812 Mpi2ConfigRequest_t mpi_request;
813 int r;
814
815 memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
816 mpi_request.Function = MPI2_FUNCTION_CONFIG;
817 mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
818 mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
819 mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_DEVICE;
820 mpi_request.Header.PageVersion = MPI2_SASDEVICE1_PAGEVERSION;
821 mpi_request.Header.PageNumber = 1;
822 mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE);
823 r = _config_request(ioc, &mpi_request, mpi_reply,
824 MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
825 if (r)
826 goto out;
827
828 mpi_request.PageAddress = cpu_to_le32(form | handle);
829 mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
830 r = _config_request(ioc, &mpi_request, mpi_reply,
831 MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
832 sizeof(*config_page));
833 out:
834 return r;
835 }
836
837 /**
838 * mpt2sas_config_get_number_hba_phys - obtain number of phys on the host
839 * @ioc: per adapter object
840 * @num_phys: pointer returned with the number of phys
841 * Context: sleep.
842 *
843 * Returns 0 for success, non-zero for failure.
844 */
845 int
mpt2sas_config_get_number_hba_phys(struct MPT2SAS_ADAPTER * ioc,u8 * num_phys)846 mpt2sas_config_get_number_hba_phys(struct MPT2SAS_ADAPTER *ioc, u8 *num_phys)
847 {
848 Mpi2ConfigRequest_t mpi_request;
849 int r;
850 u16 ioc_status;
851 Mpi2ConfigReply_t mpi_reply;
852 Mpi2SasIOUnitPage0_t config_page;
853
854 *num_phys = 0;
855 memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
856 mpi_request.Function = MPI2_FUNCTION_CONFIG;
857 mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
858 mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
859 mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_IO_UNIT;
860 mpi_request.Header.PageNumber = 0;
861 mpi_request.Header.PageVersion = MPI2_SASIOUNITPAGE0_PAGEVERSION;
862 mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE);
863 r = _config_request(ioc, &mpi_request, &mpi_reply,
864 MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
865 if (r)
866 goto out;
867
868 mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
869 r = _config_request(ioc, &mpi_request, &mpi_reply,
870 MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, &config_page,
871 sizeof(Mpi2SasIOUnitPage0_t));
872 if (!r) {
873 ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
874 MPI2_IOCSTATUS_MASK;
875 if (ioc_status == MPI2_IOCSTATUS_SUCCESS)
876 *num_phys = config_page.NumPhys;
877 }
878 out:
879 return r;
880 }
881
882 /**
883 * mpt2sas_config_get_sas_iounit_pg0 - obtain sas iounit page 0
884 * @ioc: per adapter object
885 * @mpi_reply: reply mf payload returned from firmware
886 * @config_page: contents of the config page
887 * @sz: size of buffer passed in config_page
888 * Context: sleep.
889 *
890 * Calling function should call config_get_number_hba_phys prior to
891 * this function, so enough memory is allocated for config_page.
892 *
893 * Returns 0 for success, non-zero for failure.
894 */
895 int
mpt2sas_config_get_sas_iounit_pg0(struct MPT2SAS_ADAPTER * ioc,Mpi2ConfigReply_t * mpi_reply,Mpi2SasIOUnitPage0_t * config_page,u16 sz)896 mpt2sas_config_get_sas_iounit_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
897 *mpi_reply, Mpi2SasIOUnitPage0_t *config_page, u16 sz)
898 {
899 Mpi2ConfigRequest_t mpi_request;
900 int r;
901
902 memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
903 mpi_request.Function = MPI2_FUNCTION_CONFIG;
904 mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
905 mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
906 mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_IO_UNIT;
907 mpi_request.Header.PageNumber = 0;
908 mpi_request.Header.PageVersion = MPI2_SASIOUNITPAGE0_PAGEVERSION;
909 mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE);
910 r = _config_request(ioc, &mpi_request, mpi_reply,
911 MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
912 if (r)
913 goto out;
914
915 mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
916 r = _config_request(ioc, &mpi_request, mpi_reply,
917 MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, sz);
918 out:
919 return r;
920 }
921
922 /**
923 * mpt2sas_config_get_sas_iounit_pg1 - obtain sas iounit page 1
924 * @ioc: per adapter object
925 * @mpi_reply: reply mf payload returned from firmware
926 * @config_page: contents of the config page
927 * @sz: size of buffer passed in config_page
928 * Context: sleep.
929 *
930 * Calling function should call config_get_number_hba_phys prior to
931 * this function, so enough memory is allocated for config_page.
932 *
933 * Returns 0 for success, non-zero for failure.
934 */
935 int
mpt2sas_config_get_sas_iounit_pg1(struct MPT2SAS_ADAPTER * ioc,Mpi2ConfigReply_t * mpi_reply,Mpi2SasIOUnitPage1_t * config_page,u16 sz)936 mpt2sas_config_get_sas_iounit_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
937 *mpi_reply, Mpi2SasIOUnitPage1_t *config_page, u16 sz)
938 {
939 Mpi2ConfigRequest_t mpi_request;
940 int r;
941
942 memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
943 mpi_request.Function = MPI2_FUNCTION_CONFIG;
944 mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
945 mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
946 mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_IO_UNIT;
947 mpi_request.Header.PageNumber = 1;
948 mpi_request.Header.PageVersion = MPI2_SASIOUNITPAGE1_PAGEVERSION;
949 mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE);
950 r = _config_request(ioc, &mpi_request, mpi_reply,
951 MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
952 if (r)
953 goto out;
954
955 mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
956 r = _config_request(ioc, &mpi_request, mpi_reply,
957 MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, sz);
958 out:
959 return r;
960 }
961
962 /**
963 * mpt2sas_config_set_sas_iounit_pg1 - send sas iounit page 1
964 * @ioc: per adapter object
965 * @mpi_reply: reply mf payload returned from firmware
966 * @config_page: contents of the config page
967 * @sz: size of buffer passed in config_page
968 * Context: sleep.
969 *
970 * Calling function should call config_get_number_hba_phys prior to
971 * this function, so enough memory is allocated for config_page.
972 *
973 * Returns 0 for success, non-zero for failure.
974 */
975 int
mpt2sas_config_set_sas_iounit_pg1(struct MPT2SAS_ADAPTER * ioc,Mpi2ConfigReply_t * mpi_reply,Mpi2SasIOUnitPage1_t * config_page,u16 sz)976 mpt2sas_config_set_sas_iounit_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
977 *mpi_reply, Mpi2SasIOUnitPage1_t *config_page, u16 sz)
978 {
979 Mpi2ConfigRequest_t mpi_request;
980 int r;
981
982 memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
983 mpi_request.Function = MPI2_FUNCTION_CONFIG;
984 mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
985 mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
986 mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_IO_UNIT;
987 mpi_request.Header.PageNumber = 1;
988 mpi_request.Header.PageVersion = MPI2_SASIOUNITPAGE1_PAGEVERSION;
989 mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE);
990 r = _config_request(ioc, &mpi_request, mpi_reply,
991 MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
992 if (r)
993 goto out;
994
995 mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_WRITE_CURRENT;
996 _config_request(ioc, &mpi_request, mpi_reply,
997 MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, sz);
998 mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_WRITE_NVRAM;
999 r = _config_request(ioc, &mpi_request, mpi_reply,
1000 MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, sz);
1001 out:
1002 return r;
1003 }
1004
1005 /**
1006 * mpt2sas_config_get_expander_pg0 - obtain expander page 0
1007 * @ioc: per adapter object
1008 * @mpi_reply: reply mf payload returned from firmware
1009 * @config_page: contents of the config page
1010 * @form: GET_NEXT_HANDLE or HANDLE
1011 * @handle: expander handle
1012 * Context: sleep.
1013 *
1014 * Returns 0 for success, non-zero for failure.
1015 */
1016 int
mpt2sas_config_get_expander_pg0(struct MPT2SAS_ADAPTER * ioc,Mpi2ConfigReply_t * mpi_reply,Mpi2ExpanderPage0_t * config_page,u32 form,u32 handle)1017 mpt2sas_config_get_expander_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
1018 *mpi_reply, Mpi2ExpanderPage0_t *config_page, u32 form, u32 handle)
1019 {
1020 Mpi2ConfigRequest_t mpi_request;
1021 int r;
1022
1023 memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
1024 mpi_request.Function = MPI2_FUNCTION_CONFIG;
1025 mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
1026 mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
1027 mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_EXPANDER;
1028 mpi_request.Header.PageNumber = 0;
1029 mpi_request.Header.PageVersion = MPI2_SASEXPANDER0_PAGEVERSION;
1030 mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE);
1031 r = _config_request(ioc, &mpi_request, mpi_reply,
1032 MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
1033 if (r)
1034 goto out;
1035
1036 mpi_request.PageAddress = cpu_to_le32(form | handle);
1037 mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
1038 r = _config_request(ioc, &mpi_request, mpi_reply,
1039 MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
1040 sizeof(*config_page));
1041 out:
1042 return r;
1043 }
1044
1045 /**
1046 * mpt2sas_config_get_expander_pg1 - obtain expander page 1
1047 * @ioc: per adapter object
1048 * @mpi_reply: reply mf payload returned from firmware
1049 * @config_page: contents of the config page
1050 * @phy_number: phy number
1051 * @handle: expander handle
1052 * Context: sleep.
1053 *
1054 * Returns 0 for success, non-zero for failure.
1055 */
1056 int
mpt2sas_config_get_expander_pg1(struct MPT2SAS_ADAPTER * ioc,Mpi2ConfigReply_t * mpi_reply,Mpi2ExpanderPage1_t * config_page,u32 phy_number,u16 handle)1057 mpt2sas_config_get_expander_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
1058 *mpi_reply, Mpi2ExpanderPage1_t *config_page, u32 phy_number,
1059 u16 handle)
1060 {
1061 Mpi2ConfigRequest_t mpi_request;
1062 int r;
1063
1064 memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
1065 mpi_request.Function = MPI2_FUNCTION_CONFIG;
1066 mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
1067 mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
1068 mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_EXPANDER;
1069 mpi_request.Header.PageNumber = 1;
1070 mpi_request.Header.PageVersion = MPI2_SASEXPANDER1_PAGEVERSION;
1071 mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE);
1072 r = _config_request(ioc, &mpi_request, mpi_reply,
1073 MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
1074 if (r)
1075 goto out;
1076
1077 mpi_request.PageAddress =
1078 cpu_to_le32(MPI2_SAS_EXPAND_PGAD_FORM_HNDL_PHY_NUM |
1079 (phy_number << MPI2_SAS_EXPAND_PGAD_PHYNUM_SHIFT) | handle);
1080 mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
1081 r = _config_request(ioc, &mpi_request, mpi_reply,
1082 MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
1083 sizeof(*config_page));
1084 out:
1085 return r;
1086 }
1087
1088 /**
1089 * mpt2sas_config_get_enclosure_pg0 - obtain enclosure page 0
1090 * @ioc: per adapter object
1091 * @mpi_reply: reply mf payload returned from firmware
1092 * @config_page: contents of the config page
1093 * @form: GET_NEXT_HANDLE or HANDLE
1094 * @handle: expander handle
1095 * Context: sleep.
1096 *
1097 * Returns 0 for success, non-zero for failure.
1098 */
1099 int
mpt2sas_config_get_enclosure_pg0(struct MPT2SAS_ADAPTER * ioc,Mpi2ConfigReply_t * mpi_reply,Mpi2SasEnclosurePage0_t * config_page,u32 form,u32 handle)1100 mpt2sas_config_get_enclosure_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
1101 *mpi_reply, Mpi2SasEnclosurePage0_t *config_page, u32 form, u32 handle)
1102 {
1103 Mpi2ConfigRequest_t mpi_request;
1104 int r;
1105
1106 memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
1107 mpi_request.Function = MPI2_FUNCTION_CONFIG;
1108 mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
1109 mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
1110 mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_ENCLOSURE;
1111 mpi_request.Header.PageNumber = 0;
1112 mpi_request.Header.PageVersion = MPI2_SASENCLOSURE0_PAGEVERSION;
1113 mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE);
1114 r = _config_request(ioc, &mpi_request, mpi_reply,
1115 MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
1116 if (r)
1117 goto out;
1118
1119 mpi_request.PageAddress = cpu_to_le32(form | handle);
1120 mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
1121 r = _config_request(ioc, &mpi_request, mpi_reply,
1122 MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
1123 sizeof(*config_page));
1124 out:
1125 return r;
1126 }
1127
1128 /**
1129 * mpt2sas_config_get_phy_pg0 - obtain phy page 0
1130 * @ioc: per adapter object
1131 * @mpi_reply: reply mf payload returned from firmware
1132 * @config_page: contents of the config page
1133 * @phy_number: phy number
1134 * Context: sleep.
1135 *
1136 * Returns 0 for success, non-zero for failure.
1137 */
1138 int
mpt2sas_config_get_phy_pg0(struct MPT2SAS_ADAPTER * ioc,Mpi2ConfigReply_t * mpi_reply,Mpi2SasPhyPage0_t * config_page,u32 phy_number)1139 mpt2sas_config_get_phy_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
1140 *mpi_reply, Mpi2SasPhyPage0_t *config_page, u32 phy_number)
1141 {
1142 Mpi2ConfigRequest_t mpi_request;
1143 int r;
1144
1145 memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
1146 mpi_request.Function = MPI2_FUNCTION_CONFIG;
1147 mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
1148 mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
1149 mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_PHY;
1150 mpi_request.Header.PageNumber = 0;
1151 mpi_request.Header.PageVersion = MPI2_SASPHY0_PAGEVERSION;
1152 mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE);
1153 r = _config_request(ioc, &mpi_request, mpi_reply,
1154 MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
1155 if (r)
1156 goto out;
1157
1158 mpi_request.PageAddress =
1159 cpu_to_le32(MPI2_SAS_PHY_PGAD_FORM_PHY_NUMBER | phy_number);
1160 mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
1161 r = _config_request(ioc, &mpi_request, mpi_reply,
1162 MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
1163 sizeof(*config_page));
1164 out:
1165 return r;
1166 }
1167
1168 /**
1169 * mpt2sas_config_get_phy_pg1 - obtain phy page 1
1170 * @ioc: per adapter object
1171 * @mpi_reply: reply mf payload returned from firmware
1172 * @config_page: contents of the config page
1173 * @phy_number: phy number
1174 * Context: sleep.
1175 *
1176 * Returns 0 for success, non-zero for failure.
1177 */
1178 int
mpt2sas_config_get_phy_pg1(struct MPT2SAS_ADAPTER * ioc,Mpi2ConfigReply_t * mpi_reply,Mpi2SasPhyPage1_t * config_page,u32 phy_number)1179 mpt2sas_config_get_phy_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
1180 *mpi_reply, Mpi2SasPhyPage1_t *config_page, u32 phy_number)
1181 {
1182 Mpi2ConfigRequest_t mpi_request;
1183 int r;
1184
1185 memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
1186 mpi_request.Function = MPI2_FUNCTION_CONFIG;
1187 mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
1188 mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
1189 mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_PHY;
1190 mpi_request.Header.PageNumber = 1;
1191 mpi_request.Header.PageVersion = MPI2_SASPHY1_PAGEVERSION;
1192 mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE);
1193 r = _config_request(ioc, &mpi_request, mpi_reply,
1194 MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
1195 if (r)
1196 goto out;
1197
1198 mpi_request.PageAddress =
1199 cpu_to_le32(MPI2_SAS_PHY_PGAD_FORM_PHY_NUMBER | phy_number);
1200 mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
1201 r = _config_request(ioc, &mpi_request, mpi_reply,
1202 MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
1203 sizeof(*config_page));
1204 out:
1205 return r;
1206 }
1207
1208 /**
1209 * mpt2sas_config_get_raid_volume_pg1 - obtain raid volume page 1
1210 * @ioc: per adapter object
1211 * @mpi_reply: reply mf payload returned from firmware
1212 * @config_page: contents of the config page
1213 * @form: GET_NEXT_HANDLE or HANDLE
1214 * @handle: volume handle
1215 * Context: sleep.
1216 *
1217 * Returns 0 for success, non-zero for failure.
1218 */
1219 int
mpt2sas_config_get_raid_volume_pg1(struct MPT2SAS_ADAPTER * ioc,Mpi2ConfigReply_t * mpi_reply,Mpi2RaidVolPage1_t * config_page,u32 form,u32 handle)1220 mpt2sas_config_get_raid_volume_pg1(struct MPT2SAS_ADAPTER *ioc,
1221 Mpi2ConfigReply_t *mpi_reply, Mpi2RaidVolPage1_t *config_page, u32 form,
1222 u32 handle)
1223 {
1224 Mpi2ConfigRequest_t mpi_request;
1225 int r;
1226
1227 memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
1228 mpi_request.Function = MPI2_FUNCTION_CONFIG;
1229 mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
1230 mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_RAID_VOLUME;
1231 mpi_request.Header.PageNumber = 1;
1232 mpi_request.Header.PageVersion = MPI2_RAIDVOLPAGE1_PAGEVERSION;
1233 mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE);
1234 r = _config_request(ioc, &mpi_request, mpi_reply,
1235 MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
1236 if (r)
1237 goto out;
1238
1239 mpi_request.PageAddress = cpu_to_le32(form | handle);
1240 mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
1241 r = _config_request(ioc, &mpi_request, mpi_reply,
1242 MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
1243 sizeof(*config_page));
1244 out:
1245 return r;
1246 }
1247
1248 /**
1249 * mpt2sas_config_get_number_pds - obtain number of phys disk assigned to volume
1250 * @ioc: per adapter object
1251 * @handle: volume handle
1252 * @num_pds: returns pds count
1253 * Context: sleep.
1254 *
1255 * Returns 0 for success, non-zero for failure.
1256 */
1257 int
mpt2sas_config_get_number_pds(struct MPT2SAS_ADAPTER * ioc,u16 handle,u8 * num_pds)1258 mpt2sas_config_get_number_pds(struct MPT2SAS_ADAPTER *ioc, u16 handle,
1259 u8 *num_pds)
1260 {
1261 Mpi2ConfigRequest_t mpi_request;
1262 Mpi2RaidVolPage0_t config_page;
1263 Mpi2ConfigReply_t mpi_reply;
1264 int r;
1265 u16 ioc_status;
1266
1267 memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
1268 *num_pds = 0;
1269 mpi_request.Function = MPI2_FUNCTION_CONFIG;
1270 mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
1271 mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_RAID_VOLUME;
1272 mpi_request.Header.PageNumber = 0;
1273 mpi_request.Header.PageVersion = MPI2_RAIDVOLPAGE0_PAGEVERSION;
1274 mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE);
1275 r = _config_request(ioc, &mpi_request, &mpi_reply,
1276 MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
1277 if (r)
1278 goto out;
1279
1280 mpi_request.PageAddress =
1281 cpu_to_le32(MPI2_RAID_VOLUME_PGAD_FORM_HANDLE | handle);
1282 mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
1283 r = _config_request(ioc, &mpi_request, &mpi_reply,
1284 MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, &config_page,
1285 sizeof(Mpi2RaidVolPage0_t));
1286 if (!r) {
1287 ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
1288 MPI2_IOCSTATUS_MASK;
1289 if (ioc_status == MPI2_IOCSTATUS_SUCCESS)
1290 *num_pds = config_page.NumPhysDisks;
1291 }
1292
1293 out:
1294 return r;
1295 }
1296
1297 /**
1298 * mpt2sas_config_get_raid_volume_pg0 - obtain raid volume page 0
1299 * @ioc: per adapter object
1300 * @mpi_reply: reply mf payload returned from firmware
1301 * @config_page: contents of the config page
1302 * @form: GET_NEXT_HANDLE or HANDLE
1303 * @handle: volume handle
1304 * @sz: size of buffer passed in config_page
1305 * Context: sleep.
1306 *
1307 * Returns 0 for success, non-zero for failure.
1308 */
1309 int
mpt2sas_config_get_raid_volume_pg0(struct MPT2SAS_ADAPTER * ioc,Mpi2ConfigReply_t * mpi_reply,Mpi2RaidVolPage0_t * config_page,u32 form,u32 handle,u16 sz)1310 mpt2sas_config_get_raid_volume_pg0(struct MPT2SAS_ADAPTER *ioc,
1311 Mpi2ConfigReply_t *mpi_reply, Mpi2RaidVolPage0_t *config_page, u32 form,
1312 u32 handle, u16 sz)
1313 {
1314 Mpi2ConfigRequest_t mpi_request;
1315 int r;
1316
1317 memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
1318 mpi_request.Function = MPI2_FUNCTION_CONFIG;
1319 mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
1320 mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_RAID_VOLUME;
1321 mpi_request.Header.PageNumber = 0;
1322 mpi_request.Header.PageVersion = MPI2_RAIDVOLPAGE0_PAGEVERSION;
1323 mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE);
1324 r = _config_request(ioc, &mpi_request, mpi_reply,
1325 MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
1326 if (r)
1327 goto out;
1328
1329 mpi_request.PageAddress = cpu_to_le32(form | handle);
1330 mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
1331 r = _config_request(ioc, &mpi_request, mpi_reply,
1332 MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, sz);
1333 out:
1334 return r;
1335 }
1336
1337 /**
1338 * mpt2sas_config_get_phys_disk_pg0 - obtain phys disk page 0
1339 * @ioc: per adapter object
1340 * @mpi_reply: reply mf payload returned from firmware
1341 * @config_page: contents of the config page
1342 * @form: GET_NEXT_PHYSDISKNUM, PHYSDISKNUM, DEVHANDLE
1343 * @form_specific: specific to the form
1344 * Context: sleep.
1345 *
1346 * Returns 0 for success, non-zero for failure.
1347 */
1348 int
mpt2sas_config_get_phys_disk_pg0(struct MPT2SAS_ADAPTER * ioc,Mpi2ConfigReply_t * mpi_reply,Mpi2RaidPhysDiskPage0_t * config_page,u32 form,u32 form_specific)1349 mpt2sas_config_get_phys_disk_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
1350 *mpi_reply, Mpi2RaidPhysDiskPage0_t *config_page, u32 form,
1351 u32 form_specific)
1352 {
1353 Mpi2ConfigRequest_t mpi_request;
1354 int r;
1355
1356 memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
1357 mpi_request.Function = MPI2_FUNCTION_CONFIG;
1358 mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
1359 mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_RAID_PHYSDISK;
1360 mpi_request.Header.PageNumber = 0;
1361 mpi_request.Header.PageVersion = MPI2_RAIDPHYSDISKPAGE0_PAGEVERSION;
1362 mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE);
1363 r = _config_request(ioc, &mpi_request, mpi_reply,
1364 MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
1365 if (r)
1366 goto out;
1367
1368 mpi_request.PageAddress = cpu_to_le32(form | form_specific);
1369 mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
1370 r = _config_request(ioc, &mpi_request, mpi_reply,
1371 MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
1372 sizeof(*config_page));
1373 out:
1374 return r;
1375 }
1376
1377 /**
1378 * mpt2sas_config_get_volume_handle - returns volume handle for give hidden raid components
1379 * @ioc: per adapter object
1380 * @pd_handle: phys disk handle
1381 * @volume_handle: volume handle
1382 * Context: sleep.
1383 *
1384 * Returns 0 for success, non-zero for failure.
1385 */
1386 int
mpt2sas_config_get_volume_handle(struct MPT2SAS_ADAPTER * ioc,u16 pd_handle,u16 * volume_handle)1387 mpt2sas_config_get_volume_handle(struct MPT2SAS_ADAPTER *ioc, u16 pd_handle,
1388 u16 *volume_handle)
1389 {
1390 Mpi2RaidConfigurationPage0_t *config_page = NULL;
1391 Mpi2ConfigRequest_t mpi_request;
1392 Mpi2ConfigReply_t mpi_reply;
1393 int r, i, config_page_sz;
1394 u16 ioc_status;
1395 int config_num;
1396 u16 element_type;
1397 u16 phys_disk_dev_handle;
1398
1399 *volume_handle = 0;
1400 memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
1401 mpi_request.Function = MPI2_FUNCTION_CONFIG;
1402 mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
1403 mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
1404 mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_RAID_CONFIG;
1405 mpi_request.Header.PageVersion = MPI2_RAIDCONFIG0_PAGEVERSION;
1406 mpi_request.Header.PageNumber = 0;
1407 mpt2sas_base_build_zero_len_sge(ioc, &mpi_request.PageBufferSGE);
1408 r = _config_request(ioc, &mpi_request, &mpi_reply,
1409 MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
1410 if (r)
1411 goto out;
1412
1413 mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
1414 config_page_sz = (le16_to_cpu(mpi_reply.ExtPageLength) * 4);
1415 config_page = kmalloc(config_page_sz, GFP_KERNEL);
1416 if (!config_page) {
1417 r = -1;
1418 goto out;
1419 }
1420 config_num = 0xff;
1421 while (1) {
1422 mpi_request.PageAddress = cpu_to_le32(config_num +
1423 MPI2_RAID_PGAD_FORM_GET_NEXT_CONFIGNUM);
1424 r = _config_request(ioc, &mpi_request, &mpi_reply,
1425 MPT2_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
1426 config_page_sz);
1427 if (r)
1428 goto out;
1429 r = -1;
1430 ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
1431 MPI2_IOCSTATUS_MASK;
1432 if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
1433 goto out;
1434 for (i = 0; i < config_page->NumElements; i++) {
1435 element_type = le16_to_cpu(config_page->
1436 ConfigElement[i].ElementFlags) &
1437 MPI2_RAIDCONFIG0_EFLAGS_MASK_ELEMENT_TYPE;
1438 if (element_type ==
1439 MPI2_RAIDCONFIG0_EFLAGS_VOL_PHYS_DISK_ELEMENT ||
1440 element_type ==
1441 MPI2_RAIDCONFIG0_EFLAGS_OCE_ELEMENT) {
1442 phys_disk_dev_handle =
1443 le16_to_cpu(config_page->ConfigElement[i].
1444 PhysDiskDevHandle);
1445 if (phys_disk_dev_handle == pd_handle) {
1446 *volume_handle =
1447 le16_to_cpu(config_page->
1448 ConfigElement[i].VolDevHandle);
1449 r = 0;
1450 goto out;
1451 }
1452 } else if (element_type ==
1453 MPI2_RAIDCONFIG0_EFLAGS_HOT_SPARE_ELEMENT) {
1454 *volume_handle = 0;
1455 r = 0;
1456 goto out;
1457 }
1458 }
1459 config_num = config_page->ConfigNum;
1460 }
1461 out:
1462 kfree(config_page);
1463 return r;
1464 }
1465
1466 /**
1467 * mpt2sas_config_get_volume_wwid - returns wwid given the volume handle
1468 * @ioc: per adapter object
1469 * @volume_handle: volume handle
1470 * @wwid: volume wwid
1471 * Context: sleep.
1472 *
1473 * Returns 0 for success, non-zero for failure.
1474 */
1475 int
mpt2sas_config_get_volume_wwid(struct MPT2SAS_ADAPTER * ioc,u16 volume_handle,u64 * wwid)1476 mpt2sas_config_get_volume_wwid(struct MPT2SAS_ADAPTER *ioc, u16 volume_handle,
1477 u64 *wwid)
1478 {
1479 Mpi2ConfigReply_t mpi_reply;
1480 Mpi2RaidVolPage1_t raid_vol_pg1;
1481
1482 *wwid = 0;
1483 if (!(mpt2sas_config_get_raid_volume_pg1(ioc, &mpi_reply,
1484 &raid_vol_pg1, MPI2_RAID_VOLUME_PGAD_FORM_HANDLE,
1485 volume_handle))) {
1486 *wwid = le64_to_cpu(raid_vol_pg1.WWID);
1487 return 0;
1488 } else
1489 return -1;
1490 }
1491