• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1 /*
2  * This file function prototypes, data structure
3  * and  definitions for all the host/station commands
4  */
5 
6 #ifndef _LBS_HOST_H_
7 #define _LBS_HOST_H_
8 
9 #include "types.h"
10 #include "defs.h"
11 
12 #define DEFAULT_AD_HOC_CHANNEL                  6
13 
14 #define CMD_OPTION_WAITFORRSP                   0x0002
15 
16 /* Host command IDs */
17 
18 /*
19  * Return command are almost always the same as the host command, but with
20  * bit 15 set high.  There are a few exceptions, though...
21  */
22 #define CMD_RET(cmd)                            (0x8000 | cmd)
23 
24 /* Return command convention exceptions: */
25 #define CMD_RET_802_11_ASSOCIATE                0x8012
26 
27 /* Command codes */
28 #define CMD_GET_HW_SPEC                         0x0003
29 #define CMD_EEPROM_UPDATE                       0x0004
30 #define CMD_802_11_RESET                        0x0005
31 #define CMD_802_11_SCAN                         0x0006
32 #define CMD_802_11_GET_LOG                      0x000b
33 #define CMD_MAC_MULTICAST_ADR                   0x0010
34 #define CMD_802_11_AUTHENTICATE                 0x0011
35 #define CMD_802_11_EEPROM_ACCESS                0x0059
36 #define CMD_802_11_ASSOCIATE                    0x0050
37 #define CMD_802_11_SET_WEP                      0x0013
38 #define CMD_802_11_GET_STAT                     0x0014
39 #define CMD_802_3_GET_STAT                      0x0015
40 #define CMD_802_11_SNMP_MIB                     0x0016
41 #define CMD_MAC_REG_MAP                         0x0017
42 #define CMD_BBP_REG_MAP                         0x0018
43 #define CMD_MAC_REG_ACCESS                      0x0019
44 #define CMD_BBP_REG_ACCESS                      0x001a
45 #define CMD_RF_REG_ACCESS                       0x001b
46 #define CMD_802_11_RADIO_CONTROL                0x001c
47 #define CMD_802_11_RF_CHANNEL                   0x001d
48 #define CMD_802_11_RF_TX_POWER                  0x001e
49 #define CMD_802_11_RSSI                         0x001f
50 #define CMD_802_11_RF_ANTENNA                   0x0020
51 #define CMD_802_11_PS_MODE                      0x0021
52 #define CMD_802_11_DATA_RATE                    0x0022
53 #define CMD_RF_REG_MAP                          0x0023
54 #define CMD_802_11_DEAUTHENTICATE               0x0024
55 #define CMD_802_11_REASSOCIATE                  0x0025
56 #define CMD_MAC_CONTROL                         0x0028
57 #define CMD_802_11_AD_HOC_START                 0x002b
58 #define CMD_802_11_AD_HOC_JOIN                  0x002c
59 #define CMD_802_11_QUERY_TKIP_REPLY_CNTRS       0x002e
60 #define CMD_802_11_ENABLE_RSN                   0x002f
61 #define CMD_802_11_SET_AFC                      0x003c
62 #define CMD_802_11_GET_AFC                      0x003d
63 #define CMD_802_11_DEEP_SLEEP                   0x003e
64 #define CMD_802_11_AD_HOC_STOP                  0x0040
65 #define CMD_802_11_HOST_SLEEP_CFG               0x0043
66 #define CMD_802_11_WAKEUP_CONFIRM               0x0044
67 #define CMD_802_11_HOST_SLEEP_ACTIVATE          0x0045
68 #define CMD_802_11_BEACON_STOP                  0x0049
69 #define CMD_802_11_MAC_ADDRESS                  0x004d
70 #define CMD_802_11_LED_GPIO_CTRL                0x004e
71 #define CMD_802_11_BAND_CONFIG                  0x0058
72 #define CMD_GSPI_BUS_CONFIG                     0x005a
73 #define CMD_802_11D_DOMAIN_INFO                 0x005b
74 #define CMD_802_11_KEY_MATERIAL                 0x005e
75 #define CMD_802_11_SLEEP_PARAMS                 0x0066
76 #define CMD_802_11_INACTIVITY_TIMEOUT           0x0067
77 #define CMD_802_11_SLEEP_PERIOD                 0x0068
78 #define CMD_802_11_TPC_CFG                      0x0072
79 #define CMD_802_11_PA_CFG                       0x0073
80 #define CMD_802_11_FW_WAKE_METHOD               0x0074
81 #define CMD_802_11_SUBSCRIBE_EVENT              0x0075
82 #define CMD_802_11_RATE_ADAPT_RATESET           0x0076
83 #define CMD_802_11_TX_RATE_QUERY                0x007f
84 #define CMD_GET_TSF                             0x0080
85 #define CMD_BT_ACCESS                           0x0087
86 #define CMD_FWT_ACCESS                          0x0095
87 #define CMD_802_11_MONITOR_MODE                 0x0098
88 #define CMD_MESH_ACCESS                         0x009b
89 #define CMD_MESH_CONFIG_OLD                     0x00a3
90 #define CMD_MESH_CONFIG                         0x00ac
91 #define CMD_SET_BOOT2_VER                       0x00a5
92 #define CMD_FUNC_INIT                           0x00a9
93 #define CMD_FUNC_SHUTDOWN                       0x00aa
94 #define CMD_802_11_BEACON_CTRL                  0x00b0
95 
96 /* For the IEEE Power Save */
97 #define PS_MODE_ACTION_ENTER_PS                 0x0030
98 #define PS_MODE_ACTION_EXIT_PS                  0x0031
99 #define PS_MODE_ACTION_SLEEP_CONFIRMED          0x0034
100 
101 #define CMD_ENABLE_RSN                          0x0001
102 #define CMD_DISABLE_RSN                         0x0000
103 
104 #define CMD_ACT_GET                             0x0000
105 #define CMD_ACT_SET                             0x0001
106 
107 /* Define action or option for CMD_802_11_SET_WEP */
108 #define CMD_ACT_ADD                             0x0002
109 #define CMD_ACT_REMOVE                          0x0004
110 
111 #define CMD_TYPE_WEP_40_BIT                     0x01
112 #define CMD_TYPE_WEP_104_BIT                    0x02
113 
114 #define CMD_NUM_OF_WEP_KEYS                     4
115 
116 #define CMD_WEP_KEY_INDEX_MASK                  0x3fff
117 
118 /* Define action or option for CMD_802_11_SCAN */
119 #define CMD_BSS_TYPE_BSS                        0x0001
120 #define CMD_BSS_TYPE_IBSS                       0x0002
121 #define CMD_BSS_TYPE_ANY                        0x0003
122 
123 /* Define action or option for CMD_802_11_SCAN */
124 #define CMD_SCAN_TYPE_ACTIVE                    0x0000
125 #define CMD_SCAN_TYPE_PASSIVE                   0x0001
126 
127 #define CMD_SCAN_RADIO_TYPE_BG                  0
128 
129 #define CMD_SCAN_PROBE_DELAY_TIME               0
130 
131 /* Define action or option for CMD_MAC_CONTROL */
132 #define CMD_ACT_MAC_RX_ON                       0x0001
133 #define CMD_ACT_MAC_TX_ON                       0x0002
134 #define CMD_ACT_MAC_LOOPBACK_ON                 0x0004
135 #define CMD_ACT_MAC_WEP_ENABLE                  0x0008
136 #define CMD_ACT_MAC_INT_ENABLE                  0x0010
137 #define CMD_ACT_MAC_MULTICAST_ENABLE            0x0020
138 #define CMD_ACT_MAC_BROADCAST_ENABLE            0x0040
139 #define CMD_ACT_MAC_PROMISCUOUS_ENABLE          0x0080
140 #define CMD_ACT_MAC_ALL_MULTICAST_ENABLE        0x0100
141 #define CMD_ACT_MAC_STRICT_PROTECTION_ENABLE    0x0400
142 
143 /* Event flags for CMD_802_11_SUBSCRIBE_EVENT */
144 #define CMD_SUBSCRIBE_RSSI_LOW                  0x0001
145 #define CMD_SUBSCRIBE_SNR_LOW                   0x0002
146 #define CMD_SUBSCRIBE_FAILCOUNT                 0x0004
147 #define CMD_SUBSCRIBE_BCNMISS                   0x0008
148 #define CMD_SUBSCRIBE_RSSI_HIGH                 0x0010
149 #define CMD_SUBSCRIBE_SNR_HIGH                  0x0020
150 
151 #define RADIO_PREAMBLE_LONG                     0x00
152 #define RADIO_PREAMBLE_SHORT                    0x02
153 #define RADIO_PREAMBLE_AUTO                     0x04
154 
155 /* Define action or option for CMD_802_11_RF_CHANNEL */
156 #define CMD_OPT_802_11_RF_CHANNEL_GET           0x00
157 #define CMD_OPT_802_11_RF_CHANNEL_SET           0x01
158 
159 /* Define action or option for CMD_802_11_DATA_RATE */
160 #define CMD_ACT_SET_TX_AUTO                     0x0000
161 #define CMD_ACT_SET_TX_FIX_RATE                 0x0001
162 #define CMD_ACT_GET_TX_RATE                     0x0002
163 
164 /* Options for CMD_802_11_FW_WAKE_METHOD */
165 #define CMD_WAKE_METHOD_UNCHANGED               0x0000
166 #define CMD_WAKE_METHOD_COMMAND_INT             0x0001
167 #define CMD_WAKE_METHOD_GPIO                    0x0002
168 
169 /* Object IDs for CMD_802_11_SNMP_MIB */
170 #define SNMP_MIB_OID_BSS_TYPE                   0x0000
171 #define SNMP_MIB_OID_OP_RATE_SET                0x0001
172 #define SNMP_MIB_OID_BEACON_PERIOD              0x0002  /* Reserved on v9+ */
173 #define SNMP_MIB_OID_DTIM_PERIOD                0x0003  /* Reserved on v9+ */
174 #define SNMP_MIB_OID_ASSOC_TIMEOUT              0x0004  /* Reserved on v9+ */
175 #define SNMP_MIB_OID_RTS_THRESHOLD              0x0005
176 #define SNMP_MIB_OID_SHORT_RETRY_LIMIT          0x0006
177 #define SNMP_MIB_OID_LONG_RETRY_LIMIT           0x0007
178 #define SNMP_MIB_OID_FRAG_THRESHOLD             0x0008
179 #define SNMP_MIB_OID_11D_ENABLE                 0x0009
180 #define SNMP_MIB_OID_11H_ENABLE                 0x000A
181 
182 /* Define action or option for CMD_BT_ACCESS */
183 enum cmd_bt_access_opts {
184 	/* The bt commands start at 5 instead of 1 because the old dft commands
185 	 * are mapped to 1-4.  These old commands are no longer maintained and
186 	 * should not be called.
187 	 */
188 	CMD_ACT_BT_ACCESS_ADD = 5,
189 	CMD_ACT_BT_ACCESS_DEL,
190 	CMD_ACT_BT_ACCESS_LIST,
191 	CMD_ACT_BT_ACCESS_RESET,
192 	CMD_ACT_BT_ACCESS_SET_INVERT,
193 	CMD_ACT_BT_ACCESS_GET_INVERT
194 };
195 
196 /* Define action or option for CMD_FWT_ACCESS */
197 enum cmd_fwt_access_opts {
198 	CMD_ACT_FWT_ACCESS_ADD = 1,
199 	CMD_ACT_FWT_ACCESS_DEL,
200 	CMD_ACT_FWT_ACCESS_LOOKUP,
201 	CMD_ACT_FWT_ACCESS_LIST,
202 	CMD_ACT_FWT_ACCESS_LIST_ROUTE,
203 	CMD_ACT_FWT_ACCESS_LIST_NEIGHBOR,
204 	CMD_ACT_FWT_ACCESS_RESET,
205 	CMD_ACT_FWT_ACCESS_CLEANUP,
206 	CMD_ACT_FWT_ACCESS_TIME,
207 };
208 
209 /* Define action or option for CMD_802_11_HOST_SLEEP_CFG */
210 enum cmd_wol_cfg_opts {
211 	CMD_ACT_ACTION_NONE = 0,
212 	CMD_ACT_SET_WOL_RULE,
213 	CMD_ACT_GET_WOL_RULE,
214 	CMD_ACT_RESET_WOL_RULE,
215 };
216 
217 /* Define action or option for CMD_MESH_ACCESS */
218 enum cmd_mesh_access_opts {
219 	CMD_ACT_MESH_GET_TTL = 1,
220 	CMD_ACT_MESH_SET_TTL,
221 	CMD_ACT_MESH_GET_STATS,
222 	CMD_ACT_MESH_GET_ANYCAST,
223 	CMD_ACT_MESH_SET_ANYCAST,
224 	CMD_ACT_MESH_SET_LINK_COSTS,
225 	CMD_ACT_MESH_GET_LINK_COSTS,
226 	CMD_ACT_MESH_SET_BCAST_RATE,
227 	CMD_ACT_MESH_GET_BCAST_RATE,
228 	CMD_ACT_MESH_SET_RREQ_DELAY,
229 	CMD_ACT_MESH_GET_RREQ_DELAY,
230 	CMD_ACT_MESH_SET_ROUTE_EXP,
231 	CMD_ACT_MESH_GET_ROUTE_EXP,
232 	CMD_ACT_MESH_SET_AUTOSTART_ENABLED,
233 	CMD_ACT_MESH_GET_AUTOSTART_ENABLED,
234 	CMD_ACT_MESH_SET_GET_PRB_RSP_LIMIT = 17,
235 };
236 
237 /* Define actions and types for CMD_MESH_CONFIG */
238 enum cmd_mesh_config_actions {
239 	CMD_ACT_MESH_CONFIG_STOP = 0,
240 	CMD_ACT_MESH_CONFIG_START,
241 	CMD_ACT_MESH_CONFIG_SET,
242 	CMD_ACT_MESH_CONFIG_GET,
243 };
244 
245 enum cmd_mesh_config_types {
246 	CMD_TYPE_MESH_SET_BOOTFLAG = 1,
247 	CMD_TYPE_MESH_SET_BOOTTIME,
248 	CMD_TYPE_MESH_SET_DEF_CHANNEL,
249 	CMD_TYPE_MESH_SET_MESH_IE,
250 	CMD_TYPE_MESH_GET_DEFAULTS,
251 	CMD_TYPE_MESH_GET_MESH_IE, /* GET_DEFAULTS is superset of GET_MESHIE */
252 };
253 
254 /* Card Event definition */
255 #define MACREG_INT_CODE_TX_PPA_FREE		0
256 #define MACREG_INT_CODE_TX_DMA_DONE		1
257 #define MACREG_INT_CODE_LINK_LOST_W_SCAN	2
258 #define MACREG_INT_CODE_LINK_LOST_NO_SCAN	3
259 #define MACREG_INT_CODE_LINK_SENSED		4
260 #define MACREG_INT_CODE_CMD_FINISHED		5
261 #define MACREG_INT_CODE_MIB_CHANGED		6
262 #define MACREG_INT_CODE_INIT_DONE		7
263 #define MACREG_INT_CODE_DEAUTHENTICATED		8
264 #define MACREG_INT_CODE_DISASSOCIATED		9
265 #define MACREG_INT_CODE_PS_AWAKE		10
266 #define MACREG_INT_CODE_PS_SLEEP		11
267 #define MACREG_INT_CODE_MIC_ERR_MULTICAST	13
268 #define MACREG_INT_CODE_MIC_ERR_UNICAST		14
269 #define MACREG_INT_CODE_WM_AWAKE		15
270 #define MACREG_INT_CODE_DEEP_SLEEP_AWAKE	16
271 #define MACREG_INT_CODE_ADHOC_BCN_LOST		17
272 #define MACREG_INT_CODE_HOST_AWAKE		18
273 #define MACREG_INT_CODE_STOP_TX			19
274 #define MACREG_INT_CODE_START_TX		20
275 #define MACREG_INT_CODE_CHANNEL_SWITCH		21
276 #define MACREG_INT_CODE_MEASUREMENT_RDY		22
277 #define MACREG_INT_CODE_WMM_CHANGE		23
278 #define MACREG_INT_CODE_BG_SCAN_REPORT		24
279 #define MACREG_INT_CODE_RSSI_LOW		25
280 #define MACREG_INT_CODE_SNR_LOW			26
281 #define MACREG_INT_CODE_MAX_FAIL		27
282 #define MACREG_INT_CODE_RSSI_HIGH		28
283 #define MACREG_INT_CODE_SNR_HIGH		29
284 #define MACREG_INT_CODE_MESH_AUTO_STARTED	35
285 #define MACREG_INT_CODE_FIRMWARE_READY		48
286 
287 
288 /* 802.11-related definitions */
289 
290 /* TxPD descriptor */
291 struct txpd {
292 	/* union to cope up with later FW revisions */
293 	union {
294 		/* Current Tx packet status */
295 		__le32 tx_status;
296 		struct {
297 			/* BSS type: client, AP, etc. */
298 			u8 bss_type;
299 			/* BSS number */
300 			u8 bss_num;
301 			/* Reserved */
302 			__le16 reserved;
303 		} bss;
304 	} u;
305 	/* Tx control */
306 	__le32 tx_control;
307 	__le32 tx_packet_location;
308 	/* Tx packet length */
309 	__le16 tx_packet_length;
310 	/* First 2 byte of destination MAC address */
311 	u8 tx_dest_addr_high[2];
312 	/* Last 4 byte of destination MAC address */
313 	u8 tx_dest_addr_low[4];
314 	/* Pkt Priority */
315 	u8 priority;
316 	/* Pkt Trasnit Power control */
317 	u8 powermgmt;
318 	/* Amount of time the packet has been queued (units = 2ms) */
319 	u8 pktdelay_2ms;
320 	/* reserved */
321 	u8 reserved1;
322 } __packed;
323 
324 /* RxPD Descriptor */
325 struct rxpd {
326 	/* union to cope up with later FW revisions */
327 	union {
328 		/* Current Rx packet status */
329 		__le16 status;
330 		struct {
331 			/* BSS type: client, AP, etc. */
332 			u8 bss_type;
333 			/* BSS number */
334 			u8 bss_num;
335 		} __packed bss;
336 	} __packed u;
337 
338 	/* SNR */
339 	u8 snr;
340 
341 	/* Tx control */
342 	u8 rx_control;
343 
344 	/* Pkt length */
345 	__le16 pkt_len;
346 
347 	/* Noise Floor */
348 	u8 nf;
349 
350 	/* Rx Packet Rate */
351 	u8 rx_rate;
352 
353 	/* Pkt addr */
354 	__le32 pkt_ptr;
355 
356 	/* Next Rx RxPD addr */
357 	__le32 next_rxpd_ptr;
358 
359 	/* Pkt Priority */
360 	u8 priority;
361 	u8 reserved[3];
362 } __packed;
363 
364 struct cmd_header {
365 	__le16 command;
366 	__le16 size;
367 	__le16 seqnum;
368 	__le16 result;
369 } __packed;
370 
371 /* Generic structure to hold all key types. */
372 struct enc_key {
373 	u16 len;
374 	u16 flags;  /* KEY_INFO_* from defs.h */
375 	u16 type; /* KEY_TYPE_* from defs.h */
376 	u8 key[32];
377 };
378 
379 /* lbs_offset_value */
380 struct lbs_offset_value {
381 	u32 offset;
382 	u32 value;
383 } __packed;
384 
385 #define MAX_11D_TRIPLETS	83
386 
387 struct mrvl_ie_domain_param_set {
388 	struct mrvl_ie_header header;
389 
390 	u8 country_code[IEEE80211_COUNTRY_STRING_LEN];
391 	struct ieee80211_country_ie_triplet triplet[MAX_11D_TRIPLETS];
392 } __packed;
393 
394 struct cmd_ds_802_11d_domain_info {
395 	struct cmd_header hdr;
396 
397 	__le16 action;
398 	struct mrvl_ie_domain_param_set domain;
399 } __packed;
400 
401 /*
402  * Define data structure for CMD_GET_HW_SPEC
403  * This structure defines the response for the GET_HW_SPEC command
404  */
405 struct cmd_ds_get_hw_spec {
406 	struct cmd_header hdr;
407 
408 	/* HW Interface version number */
409 	__le16 hwifversion;
410 	/* HW version number */
411 	__le16 version;
412 	/* Max number of TxPD FW can handle */
413 	__le16 nr_txpd;
414 	/* Max no of Multicast address */
415 	__le16 nr_mcast_adr;
416 	/* MAC address */
417 	u8 permanentaddr[6];
418 
419 	/* region Code */
420 	__le16 regioncode;
421 
422 	/* Number of antenna used */
423 	__le16 nr_antenna;
424 
425 	/* FW release number, example 0x01030304 = 2.3.4p1 */
426 	__le32 fwrelease;
427 
428 	/* Base Address of TxPD queue */
429 	__le32 wcb_base;
430 	/* Read Pointer of RxPd queue */
431 	__le32 rxpd_rdptr;
432 
433 	/* Write Pointer of RxPd queue */
434 	__le32 rxpd_wrptr;
435 
436 	/*FW/HW capability */
437 	__le32 fwcapinfo;
438 } __packed;
439 
440 struct cmd_ds_802_11_subscribe_event {
441 	struct cmd_header hdr;
442 
443 	__le16 action;
444 	__le16 events;
445 
446 	/* A TLV to the CMD_802_11_SUBSCRIBE_EVENT command can contain a
447 	 * number of TLVs. From the v5.1 manual, those TLVs would add up to
448 	 * 40 bytes. However, future firmware might add additional TLVs, so I
449 	 * bump this up a bit.
450 	 */
451 	uint8_t tlv[128];
452 } __packed;
453 
454 /*
455  * This scan handle Country Information IE(802.11d compliant)
456  * Define data structure for CMD_802_11_SCAN
457  */
458 struct cmd_ds_802_11_scan {
459 	struct cmd_header hdr;
460 
461 	uint8_t bsstype;
462 	uint8_t bssid[ETH_ALEN];
463 	uint8_t tlvbuffer[0];
464 } __packed;
465 
466 struct cmd_ds_802_11_scan_rsp {
467 	struct cmd_header hdr;
468 
469 	__le16 bssdescriptsize;
470 	uint8_t nr_sets;
471 	uint8_t bssdesc_and_tlvbuffer[0];
472 } __packed;
473 
474 struct cmd_ds_802_11_get_log {
475 	struct cmd_header hdr;
476 
477 	__le32 mcasttxframe;
478 	__le32 failed;
479 	__le32 retry;
480 	__le32 multiretry;
481 	__le32 framedup;
482 	__le32 rtssuccess;
483 	__le32 rtsfailure;
484 	__le32 ackfailure;
485 	__le32 rxfrag;
486 	__le32 mcastrxframe;
487 	__le32 fcserror;
488 	__le32 txframe;
489 	__le32 wepundecryptable;
490 } __packed;
491 
492 struct cmd_ds_mac_control {
493 	struct cmd_header hdr;
494 	__le16 action;
495 	u16 reserved;
496 } __packed;
497 
498 struct cmd_ds_mac_multicast_adr {
499 	struct cmd_header hdr;
500 	__le16 action;
501 	__le16 nr_of_adrs;
502 	u8 maclist[ETH_ALEN * MRVDRV_MAX_MULTICAST_LIST_SIZE];
503 } __packed;
504 
505 struct cmd_ds_802_11_authenticate {
506 	struct cmd_header hdr;
507 
508 	u8 bssid[ETH_ALEN];
509 	u8 authtype;
510 	u8 reserved[10];
511 } __packed;
512 
513 struct cmd_ds_802_11_deauthenticate {
514 	struct cmd_header hdr;
515 
516 	u8 macaddr[ETH_ALEN];
517 	__le16 reasoncode;
518 } __packed;
519 
520 struct cmd_ds_802_11_associate {
521 	struct cmd_header hdr;
522 
523 	u8 bssid[6];
524 	__le16 capability;
525 	__le16 listeninterval;
526 	__le16 bcnperiod;
527 	u8 dtimperiod;
528 	u8 iebuf[512];    /* Enough for required and most optional IEs */
529 } __packed;
530 
531 struct cmd_ds_802_11_associate_response {
532 	struct cmd_header hdr;
533 
534 	__le16 capability;
535 	__le16 statuscode;
536 	__le16 aid;
537 	u8 iebuf[512];
538 } __packed;
539 
540 struct cmd_ds_802_11_set_wep {
541 	struct cmd_header hdr;
542 
543 	/* ACT_ADD, ACT_REMOVE or ACT_ENABLE */
544 	__le16 action;
545 
546 	/* key Index selected for Tx */
547 	__le16 keyindex;
548 
549 	/* 40, 128bit or TXWEP */
550 	uint8_t keytype[4];
551 	uint8_t keymaterial[4][16];
552 } __packed;
553 
554 struct cmd_ds_802_11_snmp_mib {
555 	struct cmd_header hdr;
556 
557 	__le16 action;
558 	__le16 oid;
559 	__le16 bufsize;
560 	u8 value[128];
561 } __packed;
562 
563 struct cmd_ds_reg_access {
564 	struct cmd_header hdr;
565 
566 	__le16 action;
567 	__le16 offset;
568 	union {
569 		u8 bbp_rf;  /* for BBP and RF registers */
570 		__le32 mac; /* for MAC registers */
571 	} value;
572 } __packed;
573 
574 struct cmd_ds_802_11_radio_control {
575 	struct cmd_header hdr;
576 
577 	__le16 action;
578 	__le16 control;
579 } __packed;
580 
581 struct cmd_ds_802_11_beacon_control {
582 	struct cmd_header hdr;
583 
584 	__le16 action;
585 	__le16 beacon_enable;
586 	__le16 beacon_period;
587 } __packed;
588 
589 struct cmd_ds_802_11_sleep_params {
590 	struct cmd_header hdr;
591 
592 	/* ACT_GET/ACT_SET */
593 	__le16 action;
594 
595 	/* Sleep clock error in ppm */
596 	__le16 error;
597 
598 	/* Wakeup offset in usec */
599 	__le16 offset;
600 
601 	/* Clock stabilization time in usec */
602 	__le16 stabletime;
603 
604 	/* control periodic calibration */
605 	uint8_t calcontrol;
606 
607 	/* control the use of external sleep clock */
608 	uint8_t externalsleepclk;
609 
610 	/* reserved field, should be set to zero */
611 	__le16 reserved;
612 } __packed;
613 
614 struct cmd_ds_802_11_rf_channel {
615 	struct cmd_header hdr;
616 
617 	__le16 action;
618 	__le16 channel;
619 	__le16 rftype;      /* unused */
620 	__le16 reserved;    /* unused */
621 	u8 channellist[32]; /* unused */
622 } __packed;
623 
624 struct cmd_ds_802_11_rssi {
625 	struct cmd_header hdr;
626 
627 	/*
628 	 * request:  number of beacons (N) to average the SNR and NF over
629 	 * response: SNR of most recent beacon
630 	 */
631 	__le16 n_or_snr;
632 
633 	/*
634 	 * The following fields are only set in the response.
635 	 * In the request these are reserved and should be set to 0.
636 	 */
637 	__le16 nf;       /* most recent beacon noise floor */
638 	__le16 avg_snr;  /* average SNR weighted by N from request */
639 	__le16 avg_nf;   /* average noise floor weighted by N from request */
640 } __packed;
641 
642 struct cmd_ds_802_11_mac_address {
643 	struct cmd_header hdr;
644 
645 	__le16 action;
646 	u8 macadd[ETH_ALEN];
647 } __packed;
648 
649 struct cmd_ds_802_11_rf_tx_power {
650 	struct cmd_header hdr;
651 
652 	__le16 action;
653 	__le16 curlevel;
654 	s8 maxlevel;
655 	s8 minlevel;
656 } __packed;
657 
658 /* MONITOR_MODE only exists in OLPC v5 firmware */
659 struct cmd_ds_802_11_monitor_mode {
660 	struct cmd_header hdr;
661 
662 	__le16 action;
663 	__le16 mode;
664 } __packed;
665 
666 struct cmd_ds_set_boot2_ver {
667 	struct cmd_header hdr;
668 
669 	__le16 action;
670 	__le16 version;
671 } __packed;
672 
673 struct cmd_ds_802_11_fw_wake_method {
674 	struct cmd_header hdr;
675 
676 	__le16 action;
677 	__le16 method;
678 } __packed;
679 
680 struct cmd_ds_802_11_ps_mode {
681 	struct cmd_header hdr;
682 
683 	__le16 action;
684 
685 	/*
686 	 * Interval for keepalive in PS mode:
687 	 * 0x0000 = don't change
688 	 * 0x001E = firmware default
689 	 * 0xFFFF = disable
690 	 */
691 	__le16 nullpktinterval;
692 
693 	/*
694 	 * Number of DTIM intervals to wake up for:
695 	 * 0 = don't change
696 	 * 1 = firmware default
697 	 * 5 = max
698 	 */
699 	__le16 multipledtim;
700 
701 	__le16 reserved;
702 	__le16 locallisteninterval;
703 
704 	/*
705 	 * AdHoc awake period (FW v9+ only):
706 	 * 0 = don't change
707 	 * 1 = always awake (IEEE standard behavior)
708 	 * 2 - 31 = sleep for (n - 1) periods and awake for 1 period
709 	 * 32 - 254 = invalid
710 	 * 255 = sleep at each ATIM
711 	 */
712 	__le16 adhoc_awake_period;
713 } __packed;
714 
715 struct cmd_confirm_sleep {
716 	struct cmd_header hdr;
717 
718 	__le16 action;
719 	__le16 nullpktinterval;
720 	__le16 multipledtim;
721 	__le16 reserved;
722 	__le16 locallisteninterval;
723 } __packed;
724 
725 struct cmd_ds_802_11_data_rate {
726 	struct cmd_header hdr;
727 
728 	__le16 action;
729 	__le16 reserved;
730 	u8 rates[MAX_RATES];
731 } __packed;
732 
733 struct cmd_ds_802_11_rate_adapt_rateset {
734 	struct cmd_header hdr;
735 	__le16 action;
736 	__le16 enablehwauto;
737 	__le16 bitmap;
738 } __packed;
739 
740 struct cmd_ds_802_11_ad_hoc_start {
741 	struct cmd_header hdr;
742 
743 	u8 ssid[IEEE80211_MAX_SSID_LEN];
744 	u8 bsstype;
745 	__le16 beaconperiod;
746 	u8 dtimperiod;   /* Reserved on v9 and later */
747 	struct ieee_ie_ibss_param_set ibss;
748 	u8 reserved1[4];
749 	struct ieee_ie_ds_param_set ds;
750 	u8 reserved2[4];
751 	__le16 probedelay;  /* Reserved on v9 and later */
752 	__le16 capability;
753 	u8 rates[MAX_RATES];
754 	u8 tlv_memory_size_pad[100];
755 } __packed;
756 
757 struct cmd_ds_802_11_ad_hoc_result {
758 	struct cmd_header hdr;
759 
760 	u8 pad[3];
761 	u8 bssid[ETH_ALEN];
762 } __packed;
763 
764 struct adhoc_bssdesc {
765 	u8 bssid[ETH_ALEN];
766 	u8 ssid[IEEE80211_MAX_SSID_LEN];
767 	u8 type;
768 	__le16 beaconperiod;
769 	u8 dtimperiod;
770 	__le64 timestamp;
771 	__le64 localtime;
772 	struct ieee_ie_ds_param_set ds;
773 	u8 reserved1[4];
774 	struct ieee_ie_ibss_param_set ibss;
775 	u8 reserved2[4];
776 	__le16 capability;
777 	u8 rates[MAX_RATES];
778 
779 	/*
780 	 * DO NOT ADD ANY FIELDS TO THIS STRUCTURE. It is used below in the
781 	 * Adhoc join command and will cause a binary layout mismatch with
782 	 * the firmware
783 	 */
784 } __packed;
785 
786 struct cmd_ds_802_11_ad_hoc_join {
787 	struct cmd_header hdr;
788 
789 	struct adhoc_bssdesc bss;
790 	__le16 failtimeout;   /* Reserved on v9 and later */
791 	__le16 probedelay;    /* Reserved on v9 and later */
792 } __packed;
793 
794 struct cmd_ds_802_11_ad_hoc_stop {
795 	struct cmd_header hdr;
796 } __packed;
797 
798 struct cmd_ds_802_11_enable_rsn {
799 	struct cmd_header hdr;
800 
801 	__le16 action;
802 	__le16 enable;
803 } __packed;
804 
805 struct MrvlIEtype_keyParamSet {
806 	/* type ID */
807 	__le16 type;
808 
809 	/* length of Payload */
810 	__le16 length;
811 
812 	/* type of key: WEP=0, TKIP=1, AES=2 */
813 	__le16 keytypeid;
814 
815 	/* key control Info specific to a keytypeid */
816 	__le16 keyinfo;
817 
818 	/* length of key */
819 	__le16 keylen;
820 
821 	/* key material of size keylen */
822 	u8 key[32];
823 } __packed;
824 
825 #define MAX_WOL_RULES 		16
826 
827 struct host_wol_rule {
828 	uint8_t rule_no;
829 	uint8_t rule_ops;
830 	__le16 sig_offset;
831 	__le16 sig_length;
832 	__le16 reserve;
833 	__be32 sig_mask;
834 	__be32 signature;
835 } __packed;
836 
837 struct wol_config {
838 	uint8_t action;
839 	uint8_t pattern;
840 	uint8_t no_rules_in_cmd;
841 	uint8_t result;
842 	struct host_wol_rule rule[MAX_WOL_RULES];
843 } __packed;
844 
845 struct cmd_ds_host_sleep {
846 	struct cmd_header hdr;
847 	__le32 criteria;
848 	uint8_t gpio;
849 	uint16_t gap;
850 	struct wol_config wol_conf;
851 } __packed;
852 
853 
854 
855 struct cmd_ds_802_11_key_material {
856 	struct cmd_header hdr;
857 
858 	__le16 action;
859 	struct MrvlIEtype_keyParamSet keyParamSet[2];
860 } __packed;
861 
862 struct cmd_ds_802_11_eeprom_access {
863 	struct cmd_header hdr;
864 	__le16 action;
865 	__le16 offset;
866 	__le16 len;
867 	/* firmware says it returns a maximum of 20 bytes */
868 #define LBS_EEPROM_READ_LEN 20
869 	u8 value[LBS_EEPROM_READ_LEN];
870 } __packed;
871 
872 struct cmd_ds_802_11_tpc_cfg {
873 	struct cmd_header hdr;
874 
875 	__le16 action;
876 	uint8_t enable;
877 	int8_t P0;
878 	int8_t P1;
879 	int8_t P2;
880 	uint8_t usesnr;
881 } __packed;
882 
883 
884 struct cmd_ds_802_11_pa_cfg {
885 	struct cmd_header hdr;
886 
887 	__le16 action;
888 	uint8_t enable;
889 	int8_t P0;
890 	int8_t P1;
891 	int8_t P2;
892 } __packed;
893 
894 
895 struct cmd_ds_802_11_led_ctrl {
896 	struct cmd_header hdr;
897 
898 	__le16 action;
899 	__le16 numled;
900 	u8 data[256];
901 } __packed;
902 
903 /* Automatic Frequency Control */
904 struct cmd_ds_802_11_afc {
905 	struct cmd_header hdr;
906 
907 	__le16 afc_auto;
908 	union {
909 		struct {
910 			__le16 threshold;
911 			__le16 period;
912 		};
913 		struct {
914 			__le16 timing_offset; /* signed */
915 			__le16 carrier_offset; /* signed */
916 		};
917 	};
918 } __packed;
919 
920 struct cmd_tx_rate_query {
921 	__le16 txrate;
922 } __packed;
923 
924 struct cmd_ds_get_tsf {
925 	__le64 tsfvalue;
926 } __packed;
927 
928 struct cmd_ds_bt_access {
929 	struct cmd_header hdr;
930 
931 	__le16 action;
932 	__le32 id;
933 	u8 addr1[ETH_ALEN];
934 	u8 addr2[ETH_ALEN];
935 } __packed;
936 
937 struct cmd_ds_fwt_access {
938 	struct cmd_header hdr;
939 
940 	__le16 action;
941 	__le32 id;
942 	u8 valid;
943 	u8 da[ETH_ALEN];
944 	u8 dir;
945 	u8 ra[ETH_ALEN];
946 	__le32 ssn;
947 	__le32 dsn;
948 	__le32 metric;
949 	u8 rate;
950 	u8 hopcount;
951 	u8 ttl;
952 	__le32 expiration;
953 	u8 sleepmode;
954 	__le32 snr;
955 	__le32 references;
956 	u8 prec[ETH_ALEN];
957 } __packed;
958 
959 struct cmd_ds_mesh_config {
960 	struct cmd_header hdr;
961 
962 	__le16 action;
963 	__le16 channel;
964 	__le16 type;
965 	__le16 length;
966 	u8 data[128];	/* last position reserved */
967 } __packed;
968 
969 struct cmd_ds_mesh_access {
970 	struct cmd_header hdr;
971 
972 	__le16 action;
973 	__le32 data[32];	/* last position reserved */
974 } __packed;
975 
976 /* Number of stats counters returned by the firmware */
977 #define MESH_STATS_NUM 8
978 #endif
979