1 /* $Id: isdnif.h,v 1.43.2.2 2004/01/12 23:08:35 keil Exp $ 2 * 3 * Linux ISDN subsystem 4 * Definition of the interface between the subsystem and its low-level drivers. 5 * 6 * Copyright 1994,95,96 by Fritz Elfert (fritz@isdn4linux.de) 7 * Copyright 1995,96 Thinking Objects Software GmbH Wuerzburg 8 * 9 * This software may be used and distributed according to the terms 10 * of the GNU General Public License, incorporated herein by reference. 11 * 12 */ 13 #ifndef __ISDNIF_H__ 14 #define __ISDNIF_H__ 15 16 17 #include <linux/skbuff.h> 18 #include <uapi/linux/isdnif.h> 19 20 /***************************************************************************/ 21 /* Extensions made by Werner Cornelius (werner@ikt.de) */ 22 /* */ 23 /* The proceed command holds a incoming call in a state to leave processes */ 24 /* enough time to check whether ist should be accepted. */ 25 /* The PROT_IO Command extends the interface to make protocol dependent */ 26 /* features available (call diversion, call waiting...). */ 27 /* */ 28 /* The PROT_IO Command is executed with the desired driver id and the arg */ 29 /* parameter coded as follows: */ 30 /* The lower 8 bits of arg contain the desired protocol from ISDN_PTYPE */ 31 /* definitions. The upper 24 bits represent the protocol specific cmd/stat.*/ 32 /* Any additional data is protocol and command specific. */ 33 /* This mechanism also applies to the statcallb callback STAT_PROT. */ 34 /* */ 35 /* This suggested extension permits an easy expansion of protocol specific */ 36 /* handling. Extensions may be added at any time without changing the HL */ 37 /* driver code and not getting conflicts without certifications. */ 38 /* The well known CAPI 2.0 interface handles such extensions in a similar */ 39 /* way. Perhaps a protocol specific module may be added and separately */ 40 /* loaded and linked to the basic isdn module for handling. */ 41 /***************************************************************************/ 42 43 /*****************/ 44 /* DSS1 commands */ 45 /*****************/ 46 #define DSS1_CMD_INVOKE ((0x00 << 8) | ISDN_PTYPE_EURO) /* invoke a supplementary service */ 47 #define DSS1_CMD_INVOKE_ABORT ((0x01 << 8) | ISDN_PTYPE_EURO) /* abort a invoke cmd */ 48 49 /*******************************/ 50 /* DSS1 Status callback values */ 51 /*******************************/ 52 #define DSS1_STAT_INVOKE_RES ((0x80 << 8) | ISDN_PTYPE_EURO) /* Result for invocation */ 53 #define DSS1_STAT_INVOKE_ERR ((0x81 << 8) | ISDN_PTYPE_EURO) /* Error Return for invocation */ 54 #define DSS1_STAT_INVOKE_BRD ((0x82 << 8) | ISDN_PTYPE_EURO) /* Deliver invoke broadcast info */ 55 56 57 /*********************************************************************/ 58 /* structures for DSS1 commands and callback */ 59 /* */ 60 /* An action is invoked by sending a DSS1_CMD_INVOKE. The ll_id, proc*/ 61 /* timeout, datalen and data fields must be set before calling. */ 62 /* */ 63 /* The return value is a positive hl_id value also delivered in the */ 64 /* hl_id field. A value of zero signals no more left hl_id capacitys.*/ 65 /* A negative return value signals errors in LL. So if the return */ 66 /* value is <= 0 no action in LL will be taken -> request ignored */ 67 /* */ 68 /* The timeout field must be filled with a positive value specifying */ 69 /* the amount of time the INVOKED process waits for a reaction from */ 70 /* the network. */ 71 /* If a response (either error or result) is received during this */ 72 /* intervall, a reporting callback is initiated and the process will */ 73 /* be deleted, the hl identifier will be freed. */ 74 /* If no response is received during the specified intervall, a error*/ 75 /* callback is initiated with timeout set to -1 and a datalen set */ 76 /* to 0. */ 77 /* If timeout is set to a value <= 0 during INVOCATION the process is*/ 78 /* immediately deleted after sending the data. No callback occurs ! */ 79 /* */ 80 /* A currently waiting process may be aborted with INVOKE_ABORT. No */ 81 /* callback will occur when a process has been aborted. */ 82 /* */ 83 /* Broadcast invoke frames from the network are reported via the */ 84 /* STAT_INVOKE_BRD callback. The ll_id is set to 0, the other fields */ 85 /* are supplied by the network and not by the HL. */ 86 /*********************************************************************/ 87 88 /*****************/ 89 /* NI1 commands */ 90 /*****************/ 91 #define NI1_CMD_INVOKE ((0x00 << 8) | ISDN_PTYPE_NI1) /* invoke a supplementary service */ 92 #define NI1_CMD_INVOKE_ABORT ((0x01 << 8) | ISDN_PTYPE_NI1) /* abort a invoke cmd */ 93 94 /*******************************/ 95 /* NI1 Status callback values */ 96 /*******************************/ 97 #define NI1_STAT_INVOKE_RES ((0x80 << 8) | ISDN_PTYPE_NI1) /* Result for invocation */ 98 #define NI1_STAT_INVOKE_ERR ((0x81 << 8) | ISDN_PTYPE_NI1) /* Error Return for invocation */ 99 #define NI1_STAT_INVOKE_BRD ((0x82 << 8) | ISDN_PTYPE_NI1) /* Deliver invoke broadcast info */ 100 101 typedef struct 102 { ulong ll_id; /* ID supplied by LL when executing */ 103 /* a command and returned by HL for */ 104 /* INVOKE_RES and INVOKE_ERR */ 105 int hl_id; /* ID supplied by HL when called */ 106 /* for executing a cmd and delivered */ 107 /* for results and errors */ 108 /* must be supplied by LL when aborting*/ 109 int proc; /* invoke procedure used by CMD_INVOKE */ 110 /* returned by callback and broadcast */ 111 int timeout; /* timeout for INVOKE CMD in ms */ 112 /* -1 in stat callback when timed out */ 113 /* error value when error callback */ 114 int datalen; /* length of cmd or stat data */ 115 u_char *data;/* pointer to data delivered or send */ 116 } isdn_cmd_stat; 117 118 /* 119 * Commands from linklevel to lowlevel 120 * 121 */ 122 #define ISDN_CMD_IOCTL 0 /* Perform ioctl */ 123 #define ISDN_CMD_DIAL 1 /* Dial out */ 124 #define ISDN_CMD_ACCEPTD 2 /* Accept an incoming call on D-Chan. */ 125 #define ISDN_CMD_ACCEPTB 3 /* Request B-Channel connect. */ 126 #define ISDN_CMD_HANGUP 4 /* Hangup */ 127 #define ISDN_CMD_CLREAZ 5 /* Clear EAZ(s) of channel */ 128 #define ISDN_CMD_SETEAZ 6 /* Set EAZ(s) of channel */ 129 #define ISDN_CMD_GETEAZ 7 /* Get EAZ(s) of channel */ 130 #define ISDN_CMD_SETSIL 8 /* Set Service-Indicator-List of channel */ 131 #define ISDN_CMD_GETSIL 9 /* Get Service-Indicator-List of channel */ 132 #define ISDN_CMD_SETL2 10 /* Set B-Chan. Layer2-Parameter */ 133 #define ISDN_CMD_GETL2 11 /* Get B-Chan. Layer2-Parameter */ 134 #define ISDN_CMD_SETL3 12 /* Set B-Chan. Layer3-Parameter */ 135 #define ISDN_CMD_GETL3 13 /* Get B-Chan. Layer3-Parameter */ 136 // #define ISDN_CMD_LOCK 14 /* Signal usage by upper levels */ 137 // #define ISDN_CMD_UNLOCK 15 /* Release usage-lock */ 138 #define ISDN_CMD_SUSPEND 16 /* Suspend connection */ 139 #define ISDN_CMD_RESUME 17 /* Resume connection */ 140 #define ISDN_CMD_PROCEED 18 /* Proceed with call establishment */ 141 #define ISDN_CMD_ALERT 19 /* Alert after Proceeding */ 142 #define ISDN_CMD_REDIR 20 /* Redir a incoming call */ 143 #define ISDN_CMD_PROT_IO 21 /* Protocol specific commands */ 144 #define CAPI_PUT_MESSAGE 22 /* CAPI message send down or up */ 145 #define ISDN_CMD_FAXCMD 23 /* FAX commands to HL-driver */ 146 #define ISDN_CMD_AUDIO 24 /* DSP, DTMF, ... settings */ 147 148 /* 149 * Status-Values delivered from lowlevel to linklevel via 150 * statcallb(). 151 * 152 */ 153 #define ISDN_STAT_STAVAIL 256 /* Raw status-data available */ 154 #define ISDN_STAT_ICALL 257 /* Incoming call detected */ 155 #define ISDN_STAT_RUN 258 /* Signal protocol-code is running */ 156 #define ISDN_STAT_STOP 259 /* Signal halt of protocol-code */ 157 #define ISDN_STAT_DCONN 260 /* Signal D-Channel connect */ 158 #define ISDN_STAT_BCONN 261 /* Signal B-Channel connect */ 159 #define ISDN_STAT_DHUP 262 /* Signal D-Channel disconnect */ 160 #define ISDN_STAT_BHUP 263 /* Signal B-Channel disconnect */ 161 #define ISDN_STAT_CINF 264 /* Charge-Info */ 162 #define ISDN_STAT_LOAD 265 /* Signal new lowlevel-driver is loaded */ 163 #define ISDN_STAT_UNLOAD 266 /* Signal unload of lowlevel-driver */ 164 #define ISDN_STAT_BSENT 267 /* Signal packet sent */ 165 #define ISDN_STAT_NODCH 268 /* Signal no D-Channel */ 166 #define ISDN_STAT_ADDCH 269 /* Add more Channels */ 167 #define ISDN_STAT_CAUSE 270 /* Cause-Message */ 168 #define ISDN_STAT_ICALLW 271 /* Incoming call without B-chan waiting */ 169 #define ISDN_STAT_REDIR 272 /* Redir result */ 170 #define ISDN_STAT_PROT 273 /* protocol IO specific callback */ 171 #define ISDN_STAT_DISPLAY 274 /* deliver a received display message */ 172 #define ISDN_STAT_L1ERR 275 /* Signal Layer-1 Error */ 173 #define ISDN_STAT_FAXIND 276 /* FAX indications from HL-driver */ 174 #define ISDN_STAT_AUDIO 277 /* DTMF, DSP indications */ 175 #define ISDN_STAT_DISCH 278 /* Disable/Enable channel usage */ 176 177 /* 178 * Audio commands 179 */ 180 #define ISDN_AUDIO_SETDD 0 /* Set DTMF detection */ 181 #define ISDN_AUDIO_DTMF 1 /* Rx/Tx DTMF */ 182 183 /* 184 * Values for errcode field 185 */ 186 #define ISDN_STAT_L1ERR_SEND 1 187 #define ISDN_STAT_L1ERR_RECV 2 188 189 /* 190 * Values for feature-field of interface-struct. 191 */ 192 /* Layer 2 */ 193 #define ISDN_FEATURE_L2_X75I (0x0001 << ISDN_PROTO_L2_X75I) 194 #define ISDN_FEATURE_L2_X75UI (0x0001 << ISDN_PROTO_L2_X75UI) 195 #define ISDN_FEATURE_L2_X75BUI (0x0001 << ISDN_PROTO_L2_X75BUI) 196 #define ISDN_FEATURE_L2_HDLC (0x0001 << ISDN_PROTO_L2_HDLC) 197 #define ISDN_FEATURE_L2_TRANS (0x0001 << ISDN_PROTO_L2_TRANS) 198 #define ISDN_FEATURE_L2_X25DTE (0x0001 << ISDN_PROTO_L2_X25DTE) 199 #define ISDN_FEATURE_L2_X25DCE (0x0001 << ISDN_PROTO_L2_X25DCE) 200 #define ISDN_FEATURE_L2_V11096 (0x0001 << ISDN_PROTO_L2_V11096) 201 #define ISDN_FEATURE_L2_V11019 (0x0001 << ISDN_PROTO_L2_V11019) 202 #define ISDN_FEATURE_L2_V11038 (0x0001 << ISDN_PROTO_L2_V11038) 203 #define ISDN_FEATURE_L2_MODEM (0x0001 << ISDN_PROTO_L2_MODEM) 204 #define ISDN_FEATURE_L2_FAX (0x0001 << ISDN_PROTO_L2_FAX) 205 #define ISDN_FEATURE_L2_HDLC_56K (0x0001 << ISDN_PROTO_L2_HDLC_56K) 206 207 #define ISDN_FEATURE_L2_MASK (0x0FFFF) /* Max. 16 protocols */ 208 #define ISDN_FEATURE_L2_SHIFT (0) 209 210 /* Layer 3 */ 211 #define ISDN_FEATURE_L3_TRANS (0x10000 << ISDN_PROTO_L3_TRANS) 212 #define ISDN_FEATURE_L3_TRANSDSP (0x10000 << ISDN_PROTO_L3_TRANSDSP) 213 #define ISDN_FEATURE_L3_FCLASS2 (0x10000 << ISDN_PROTO_L3_FCLASS2) 214 #define ISDN_FEATURE_L3_FCLASS1 (0x10000 << ISDN_PROTO_L3_FCLASS1) 215 216 #define ISDN_FEATURE_L3_MASK (0x0FF0000) /* Max. 8 Protocols */ 217 #define ISDN_FEATURE_L3_SHIFT (16) 218 219 /* Signaling */ 220 #define ISDN_FEATURE_P_UNKNOWN (0x1000000 << ISDN_PTYPE_UNKNOWN) 221 #define ISDN_FEATURE_P_1TR6 (0x1000000 << ISDN_PTYPE_1TR6) 222 #define ISDN_FEATURE_P_EURO (0x1000000 << ISDN_PTYPE_EURO) 223 #define ISDN_FEATURE_P_NI1 (0x1000000 << ISDN_PTYPE_NI1) 224 225 #define ISDN_FEATURE_P_MASK (0x0FF000000) /* Max. 8 Protocols */ 226 #define ISDN_FEATURE_P_SHIFT (24) 227 228 typedef struct setup_parm { 229 unsigned char phone[32]; /* Remote Phone-Number */ 230 unsigned char eazmsn[32]; /* Local EAZ or MSN */ 231 unsigned char si1; /* Service Indicator 1 */ 232 unsigned char si2; /* Service Indicator 2 */ 233 unsigned char plan; /* Numbering plan */ 234 unsigned char screen; /* Screening info */ 235 } setup_parm; 236 237 238 #ifdef CONFIG_ISDN_TTY_FAX 239 /* T.30 Fax G3 */ 240 241 #define FAXIDLEN 21 242 243 typedef struct T30_s { 244 /* session parameters */ 245 __u8 resolution; 246 __u8 rate; 247 __u8 width; 248 __u8 length; 249 __u8 compression; 250 __u8 ecm; 251 __u8 binary; 252 __u8 scantime; 253 __u8 id[FAXIDLEN]; 254 /* additional parameters */ 255 __u8 phase; 256 __u8 direction; 257 __u8 code; 258 __u8 badlin; 259 __u8 badmul; 260 __u8 bor; 261 __u8 fet; 262 __u8 pollid[FAXIDLEN]; 263 __u8 cq; 264 __u8 cr; 265 __u8 ctcrty; 266 __u8 minsp; 267 __u8 phcto; 268 __u8 rel; 269 __u8 nbc; 270 /* remote station parameters */ 271 __u8 r_resolution; 272 __u8 r_rate; 273 __u8 r_width; 274 __u8 r_length; 275 __u8 r_compression; 276 __u8 r_ecm; 277 __u8 r_binary; 278 __u8 r_scantime; 279 __u8 r_id[FAXIDLEN]; 280 __u8 r_code; 281 } __packed T30_s; 282 283 #define ISDN_TTY_FAX_CONN_IN 0 284 #define ISDN_TTY_FAX_CONN_OUT 1 285 286 #define ISDN_TTY_FAX_FCON 0 287 #define ISDN_TTY_FAX_DIS 1 288 #define ISDN_TTY_FAX_FTT 2 289 #define ISDN_TTY_FAX_MCF 3 290 #define ISDN_TTY_FAX_DCS 4 291 #define ISDN_TTY_FAX_TRAIN_OK 5 292 #define ISDN_TTY_FAX_EOP 6 293 #define ISDN_TTY_FAX_EOM 7 294 #define ISDN_TTY_FAX_MPS 8 295 #define ISDN_TTY_FAX_DTC 9 296 #define ISDN_TTY_FAX_RID 10 297 #define ISDN_TTY_FAX_HNG 11 298 #define ISDN_TTY_FAX_DT 12 299 #define ISDN_TTY_FAX_FCON_I 13 300 #define ISDN_TTY_FAX_DR 14 301 #define ISDN_TTY_FAX_ET 15 302 #define ISDN_TTY_FAX_CFR 16 303 #define ISDN_TTY_FAX_PTS 17 304 #define ISDN_TTY_FAX_SENT 18 305 306 #define ISDN_FAX_PHASE_IDLE 0 307 #define ISDN_FAX_PHASE_A 1 308 #define ISDN_FAX_PHASE_B 2 309 #define ISDN_FAX_PHASE_C 3 310 #define ISDN_FAX_PHASE_D 4 311 #define ISDN_FAX_PHASE_E 5 312 313 #endif /* TTY_FAX */ 314 315 #define ISDN_FAX_CLASS1_FAE 0 316 #define ISDN_FAX_CLASS1_FTS 1 317 #define ISDN_FAX_CLASS1_FRS 2 318 #define ISDN_FAX_CLASS1_FTM 3 319 #define ISDN_FAX_CLASS1_FRM 4 320 #define ISDN_FAX_CLASS1_FTH 5 321 #define ISDN_FAX_CLASS1_FRH 6 322 #define ISDN_FAX_CLASS1_CTRL 7 323 324 #define ISDN_FAX_CLASS1_OK 0 325 #define ISDN_FAX_CLASS1_CONNECT 1 326 #define ISDN_FAX_CLASS1_NOCARR 2 327 #define ISDN_FAX_CLASS1_ERROR 3 328 #define ISDN_FAX_CLASS1_FCERROR 4 329 #define ISDN_FAX_CLASS1_QUERY 5 330 331 typedef struct { 332 __u8 cmd; 333 __u8 subcmd; 334 __u8 para[50]; 335 } aux_s; 336 337 #define AT_COMMAND 0 338 #define AT_EQ_VALUE 1 339 #define AT_QUERY 2 340 #define AT_EQ_QUERY 3 341 342 /* CAPI structs */ 343 344 /* this is compatible to the old union size */ 345 #define MAX_CAPI_PARA_LEN 50 346 347 typedef struct { 348 /* Header */ 349 __u16 Length; 350 __u16 ApplId; 351 __u8 Command; 352 __u8 Subcommand; 353 __u16 Messagenumber; 354 355 /* Parameter */ 356 union { 357 __u32 Controller; 358 __u32 PLCI; 359 __u32 NCCI; 360 } adr; 361 __u8 para[MAX_CAPI_PARA_LEN]; 362 } capi_msg; 363 364 /* 365 * Structure for exchanging above infos 366 * 367 */ 368 typedef struct { 369 int driver; /* Lowlevel-Driver-ID */ 370 int command; /* Command or Status (see above) */ 371 ulong arg; /* Additional Data */ 372 union { 373 ulong errcode; /* Type of error with STAT_L1ERR */ 374 int length; /* Amount of bytes sent with STAT_BSENT */ 375 u_char num[50]; /* Additional Data */ 376 setup_parm setup;/* For SETUP msg */ 377 capi_msg cmsg; /* For CAPI like messages */ 378 char display[85];/* display message data */ 379 isdn_cmd_stat isdn_io; /* ISDN IO-parameter/result */ 380 aux_s aux; /* for modem commands/indications */ 381 #ifdef CONFIG_ISDN_TTY_FAX 382 T30_s *fax; /* Pointer to ttys fax struct */ 383 #endif 384 ulong userdata; /* User Data */ 385 } parm; 386 } isdn_ctrl; 387 388 #define dss1_io isdn_io 389 #define ni1_io isdn_io 390 391 /* 392 * The interface-struct itself (initialized at load-time of lowlevel-driver) 393 * 394 * See Documentation/isdn/INTERFACE for a description, how the communication 395 * between the ISDN subsystem and its drivers is done. 396 * 397 */ 398 typedef struct { 399 struct module *owner; 400 401 /* Number of channels supported by this driver 402 */ 403 int channels; 404 405 /* 406 * Maximum Size of transmit/receive-buffer this driver supports. 407 */ 408 int maxbufsize; 409 410 /* Feature-Flags for this driver. 411 * See defines ISDN_FEATURE_... for Values 412 */ 413 unsigned long features; 414 415 /* 416 * Needed for calculating 417 * dev->hard_header_len = linklayer header + hl_hdrlen; 418 * Drivers, not supporting sk_buff's should set this to 0. 419 */ 420 unsigned short hl_hdrlen; 421 422 /* 423 * Receive-Callback using sk_buff's 424 * Parameters: 425 * int Driver-ID 426 * int local channel-number (0 ...) 427 * struct sk_buff *skb received Data 428 */ 429 void (*rcvcallb_skb)(int, int, struct sk_buff *); 430 431 /* Status-Callback 432 * Parameters: 433 * isdn_ctrl* 434 * driver = Driver ID. 435 * command = One of above ISDN_STAT_... constants. 436 * arg = depending on status-type. 437 * num = depending on status-type. 438 */ 439 int (*statcallb)(isdn_ctrl*); 440 441 /* Send command 442 * Parameters: 443 * isdn_ctrl* 444 * driver = Driver ID. 445 * command = One of above ISDN_CMD_... constants. 446 * arg = depending on command. 447 * num = depending on command. 448 */ 449 int (*command)(isdn_ctrl*); 450 451 /* 452 * Send data using sk_buff's 453 * Parameters: 454 * int driverId 455 * int local channel-number (0...) 456 * int Flag: Need ACK for this packet. 457 * struct sk_buff *skb Data to send 458 */ 459 int (*writebuf_skb) (int, int, int, struct sk_buff *); 460 461 /* Send raw D-Channel-Commands 462 * Parameters: 463 * u_char pointer data 464 * int length of data 465 * int driverId 466 * int local channel-number (0 ...) 467 */ 468 int (*writecmd)(const u_char __user *, int, int, int); 469 470 /* Read raw Status replies 471 * u_char pointer data (volatile) 472 * int length of buffer 473 * int driverId 474 * int local channel-number (0 ...) 475 */ 476 int (*readstat)(u_char __user *, int, int, int); 477 478 char id[20]; 479 } isdn_if; 480 481 /* 482 * Function which must be called by lowlevel-driver at loadtime with 483 * the following fields of above struct set: 484 * 485 * channels Number of channels that will be supported. 486 * hl_hdrlen Space to preserve in sk_buff's when sending. Drivers, not 487 * supporting sk_buff's should set this to 0. 488 * command Address of Command-Handler. 489 * features Bitwise coded Features of this driver. (use ISDN_FEATURE_...) 490 * writebuf_skb Address of Skbuff-Send-Handler. 491 * writecmd " " D-Channel " which accepts raw D-Ch-Commands. 492 * readstat " " D-Channel " which delivers raw Status-Data. 493 * 494 * The linklevel-driver fills the following fields: 495 * 496 * channels Driver-ID assigned to this driver. (Must be used on all 497 * subsequent callbacks. 498 * rcvcallb_skb Address of handler for received Skbuff's. 499 * statcallb " " " for status-changes. 500 * 501 */ 502 extern int register_isdn(isdn_if*); 503 #include <asm/uaccess.h> 504 505 #endif /* __ISDNIF_H__ */ 506