• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1 /*
2  * serial.h: Arch-dep definitions for the Etrax100 serial driver.
3  *
4  * Copyright (C) 1998-2007 Axis Communications AB
5  */
6 
7 #ifndef _ETRAX_SERIAL_H
8 #define _ETRAX_SERIAL_H
9 
10 #include <linux/circ_buf.h>
11 #include <asm/termios.h>
12 #include <asm/dma.h>
13 #include <arch/io_interface_mux.h>
14 
15 /* Software state per channel */
16 
17 #ifdef __KERNEL__
18 /*
19  * This is our internal structure for each serial port's state.
20  *
21  * Many fields are paralleled by the structure used by the serial_struct
22  * structure.
23  *
24  * For definitions of the flags field, see tty.h
25  */
26 
27 #define SERIAL_RECV_DESCRIPTORS 8
28 
29 struct etrax_recv_buffer {
30 	struct etrax_recv_buffer *next;
31 	unsigned short length;
32 	unsigned char error;
33 	unsigned char pad;
34 
35 	unsigned char buffer[0];
36 };
37 
38 struct e100_serial {
39 	struct tty_port port;
40 	int baud;
41 	volatile u8	*ioport;	/* R_SERIALx_CTRL */
42 	u32		irq;	/* bitnr in R_IRQ_MASK2 for dmaX_descr */
43 
44 	/* Output registers */
45 	volatile u8 *oclrintradr;	/* adr to R_DMA_CHx_CLR_INTR */
46 	volatile u32 *ofirstadr;	/* adr to R_DMA_CHx_FIRST */
47 	volatile u8 *ocmdadr;		/* adr to R_DMA_CHx_CMD */
48 	const volatile u8 *ostatusadr;	/* adr to R_DMA_CHx_STATUS */
49 
50 	/* Input registers */
51 	volatile u8 *iclrintradr;	/* adr to R_DMA_CHx_CLR_INTR */
52 	volatile u32 *ifirstadr;	/* adr to R_DMA_CHx_FIRST */
53 	volatile u8 *icmdadr;		/* adr to R_DMA_CHx_CMD */
54 	volatile u32 *idescradr;	/* adr to R_DMA_CHx_DESCR */
55 
56 	u8 rx_ctrl;	/* shadow for R_SERIALx_REC_CTRL */
57 	u8 tx_ctrl;	/* shadow for R_SERIALx_TR_CTRL */
58 	u8 iseteop;	/* bit number for R_SET_EOP for the input dma */
59 	int enabled;	/* Set to 1 if the port is enabled in HW config */
60 
61 	u8 dma_out_enabled;	/* Set to 1 if DMA should be used */
62 	u8 dma_in_enabled;	/* Set to 1 if DMA should be used */
63 
64 	/* end of fields defined in rs_table[] in .c-file */
65 	int		dma_owner;
66 	unsigned int	dma_in_nbr;
67 	unsigned int	dma_out_nbr;
68 	unsigned int	dma_in_irq_nbr;
69 	unsigned int	dma_out_irq_nbr;
70 	unsigned long	dma_in_irq_flags;
71 	unsigned long	dma_out_irq_flags;
72 	char		*dma_in_irq_description;
73 	char		*dma_out_irq_description;
74 
75 	enum cris_io_interface io_if;
76 	char            *io_if_description;
77 
78 	u8		uses_dma_in;  /* Set to 1 if DMA is used */
79 	u8		uses_dma_out; /* Set to 1 if DMA is used */
80 	u8		forced_eop;   /* a fifo eop has been forced */
81 	int			baud_base;     /* For special baudrates */
82 	int			custom_divisor; /* For special baudrates */
83 	struct etrax_dma_descr	tr_descr;
84 	struct etrax_dma_descr	rec_descr[SERIAL_RECV_DESCRIPTORS];
85 	int			cur_rec_descr;
86 
87 	volatile int		tr_running; /* 1 if output is running */
88 
89 	int			x_char;	/* xon/xoff character */
90 	unsigned long		event;
91 	int			line;
92 	int			type;  /* PORT_ETRAX */
93 	struct circ_buf		xmit;
94 	struct etrax_recv_buffer *first_recv_buffer;
95 	struct etrax_recv_buffer *last_recv_buffer;
96 	unsigned int		recv_cnt;
97 	unsigned int		max_recv_cnt;
98 
99 	struct work_struct	work;
100 	struct async_icount	icount;   /* error-statistics etc.*/
101 	struct ktermios		normal_termios;
102 
103 	unsigned long char_time_usec;       /* The time for 1 char, in usecs */
104 	unsigned long flush_time_usec;      /* How often we should flush */
105 	unsigned long last_tx_active_usec;  /* Last tx usec in the jiffies */
106 	unsigned long last_tx_active;       /* Last tx time in jiffies */
107 	unsigned long last_rx_active_usec;  /* Last rx usec in the jiffies */
108 	unsigned long last_rx_active;       /* Last rx time in jiffies */
109 
110 	int break_detected_cnt;
111 	int errorcode;
112 
113 #ifdef CONFIG_ETRAX_RS485
114 	struct serial_rs485	rs485;  /* RS-485 support */
115 #endif
116 };
117 
118 /* this PORT is not in the standard serial.h. it's not actually used for
119  * anything since we only have one type of async serial-port anyway in this
120  * system.
121  */
122 
123 #define PORT_ETRAX 1
124 
125 /*
126  * Events are used to schedule things to happen at timer-interrupt
127  * time, instead of at rs interrupt time.
128  */
129 #define RS_EVENT_WRITE_WAKEUP	0
130 
131 #endif /* __KERNEL__ */
132 
133 #endif /* !_ETRAX_SERIAL_H */
134