Lines Matching refs:console
14 the console before standard serial driver is probed. The console is
33 bool "Support for console on AMBA serial port"
38 console (the system console is the device which receives all kernel
41 Even if you say Y here, the currently visible framebuffer console
42 (/dev/tty0) will still be used as the system console by default, but
44 "console=ttyAM0". (Try "man bootparam" or see the documentation of
60 bool "Support for console on AMBA serial port"
66 console (the system console is the device which receives all kernel
69 Even if you say Y here, the currently visible framebuffer console
70 (/dev/tty0) will still be used as the system console by default, but
72 "console=ttyAMA0". (Try "man bootparam" or see the documentation of
77 bool "Early console using ARM semihosting"
83 Support for early debug console using ARM semihosting. This enables
84 the console before standard serial driver is probed. This is enabled
85 with "earlycon=smh" on the kernel command line. The console is
104 bool "Support for console on a BCM1xxx DUART serial port"
110 system console (the system console is the device which receives all
126 bool "Support for console on AT91 / AT32 serial port"
131 AT91 or AT32 processor as the system console (the system
132 console is the device which receives all kernel messages and
163 /dev/, and pass "console=ttyATn" to the kernel.
168 bool "Serial console over KGDB NMI debugger port"
172 as a normal console (assuming that the port is attached to KGDB).
176 This is because this console driver processes the input in NMI
179 Note that since the console interprets input and uses polling
182 use raw console.
194 bool "Support for console on KS8695 (Centaur) serial port"
199 system console (the system console is the device which
212 bool "Support for console on meson"
217 system console (the system console is the device which
231 bool "Support for console on CLPS711X serial port"
235 Even if you say Y here, the currently visible virtual console
236 (/dev/tty0) will still be used as the system console by default, but
238 "console=ttyCL1".
271 generally being used as a console, we use our own output
276 bool "Support for console on Samsung SoC serial port"
281 an virtual console.
283 Even if you say Y here, the currently visible virtual console
284 (/dev/tty0) will still be used as the system console by default, but
286 "console=ttySACx". (Try "man bootparam" or see the documentation of
301 bool "Support for console on SiRF SoC serial port"
305 Even if you say Y here, the currently visible virtual console
306 (/dev/tty0) will still be used as the system console by default, but
308 "console=ttySiRFx". (Try "man bootparam" or see the documentation of
354 bool "Support console on DECstation DZ serial driver"
360 system console (the system console is the device which receives all
364 Note that the firmware uses ttyS3 as the serial console on
384 bool "Support for console on a DECstation Z85C30 serial port"
390 system console (the system console is the device which receives all
394 Note that the firmware uses ttyS1 as the serial console on the
414 make it the console by answering Y to this option.
416 Even if you say Y here, the currently visible virtual console
417 (/dev/tty0) will still be used as the system console by default, but
419 "console=ttyFB". (Try "man bootparam" or see the documentation of
431 bool "Support for console on Marvell MPSC serial port"
435 Say Y here if you want to support a serial console on a Marvell MPSC.
451 CPU you can make it the console by answering Y to this option.
453 Even if you say Y here, the currently visible virtual console
454 (/dev/tty0) will still be used as the system console by default, but
456 "console=ttySA0". (Try "man bootparam" or see the documentation of
476 CPU you can make it the console by answering Y to this option.
478 Even if you say Y here, the currently visible virtual console
479 (/dev/tty0) will still be used as the system console by default, but
481 "console=ttySA0". (Try "man bootparam" or see the documentation of
501 boolean "Medfile HSU serial console support"
606 CPU you can make it the console by answering Y to this option.
608 Even if you say Y here, the currently visible virtual console
609 (/dev/tty0) will still be used as the system console by default, but
611 "console=ttymxc0". (Try "man bootparam" or see the documentation of
625 bool "Support for console on Xilinx uartlite serial port"
630 console (the system console is the device which receives all kernel
652 on your Sparc system as the console, you can do so by answering
668 on your Sparc system as the console, you can do so by answering
681 software console. The following steps need to be completed to use
687 root on this console.)
688 4. Change the kernel command console parameter to: console=ttyB0
691 bool "Support for console on serial MUX"
697 bool "PDC software console support"
701 Saying Y here will enable the software based PDC console to be
702 used as the system console. This is useful for machines in
703 which the hardware based console has not been written yet. The
704 following steps must be competed to use the PDC console:
709 root on this console.)
710 4. Change the kernel command console parameter to: console=ttyB0
725 on your Sparc system as the console, you can do so by answering
732 This driver supports the console device found on SUN4V Sparc
759 bool "Support for console on SuperH SCI(F)"
776 bool "Enable PNX8XX0 serial console"
781 to use serial console, say Y. Otherwise, say N.
794 bool "Enable LPC32XX high speed UART serial console"
799 ports on the LPC32XX as the console, you can do so by answering
839 bool "Coldfire serial console support"
843 Enable a ColdFire internal serial port to be the system console.
885 on your (Power)Mac as the console, you can do so by answering
897 bool "Support for console on CPM SCC/SMC serial port"
902 console (the system console is the device which receives all kernel
905 Even if you say Y here, the currently visible framebuffer console
906 (/dev/tty0) will still be used as the system console by default, but
908 "console=ttyCPM0". (Try "man bootparam" or see the documentation of
913 bool "SGI Altix L1 serial console support"
919 controller serial port as your console (you want this!),
929 for use as console, it must be included in kernel and not as a
938 of the Freescale MPC52xx family as a console.
945 Select the MPC52xx console baud rate.
947 console baudrate
971 bool "use SIO console"
975 Say Y here if you want to support a serial console.
1024 bool "Enable NEC VR4100 series Serial Interface Unit console"
1029 a console on a serial port, say Y. Otherwise, say N.
1070 bool "MSM serial console support"
1093 bool "VIA VT8500 serial console support"
1114 you can make it the console by answering Y to this option.
1144 console.
1146 Even if you say Y here, the currently visible virtual console
1147 (/dev/tty0) will still be used as the system console by default, but
1149 "console=ttyOx". (Try "man bootparam" or see the documentation of
1176 Support for console and UART on Lantiq SoCs.
1201 Support for console on SCCNXP serial ports.
1300 you can make it the console by answering Y to this option.
1314 Support for running a console on the GRLIB APBUART
1323 bool "Altera JTAG UART console support"
1327 Enable a Altera JTAG UART port to be the system console.
1334 Bypass console output and keep going even if there is no
1362 bool "Altera UART console support"
1366 Enable a Altera UART port to be the system console.
1391 bool "Support for console on Intel EG20T PCH UART/OKI SEMICONDUCTOR ML7213 IOH"
1395 Say Y here if you wish to use the PCH UART as the system console
1396 (the system console is the device which receives all kernel messages and
1415 bool "MXS AUART console support"
1419 Enable a MXS AUART port to be the system console.
1430 bool "Cadence UART console support"
1435 Enable a Cadence UART port to be the system console.
1453 Enable a built-in UART port of the AR933X to be the system console.
1472 bool "EFM32 UART/USART console support"
1546 you can make it the console by answering Y to this option.
1561 bool "Support for console on ST ASC"