Lines Matching refs:on
8 depends on HAS_IOMEM
23 depends on ARM_AMBA && (BROKEN || !ARCH_VERSATILE)
33 bool "Support for console on AMBA serial port"
34 depends on SERIAL_AMBA_PL010=y
50 depends on ARM_AMBA
60 bool "Support for console on AMBA serial port"
61 depends on SERIAL_AMBA_PL011=y
78 depends on ARM64 || ARM
85 with "earlycon=smh" on the kernel command line. The console is
89 tristate "BCM1xxx on-chip DUART serial support"
90 depends on SIBYTE_SB1xxx_SOC=y
97 is implemented. Depending on the SOC configuration there may be
104 bool "Support for console on a BCM1xxx DUART serial port"
105 depends on SERIAL_SB1250_DUART=y
117 bool "AT91 / AT32 on-chip serial port support"
118 depends on ARCH_AT91 || AVR32
122 This enables the driver for the on-chip UARTs of the Atmel
126 bool "Support for console on AT91 / AT32 serial port"
127 depends on SERIAL_ATMEL=y
130 Say Y here if you wish to use an on-chip UART on a Atmel
136 bool "Support DMA transfers on AT91 / AT32 serial port"
137 depends on SERIAL_ATMEL
152 depends on SERIAL_ATMEL=y
169 depends on KGDB_SERIAL_CONSOLE
188 depends on ARCH_KS8695
194 bool "Support for console on KS8695 (Centaur) serial port"
195 depends on SERIAL_KS8695=y
205 depends on ARCH_MESON
208 This enables the driver for the on-chip UARTs of the Amlogic
212 bool "Support for console on meson"
213 depends on SERIAL_MESON=y
223 depends on ARCH_CLPS711X || COMPILE_TEST
227 This enables the driver for the on-chip UARTs of the Cirrus
231 bool "Support for console on CLPS711X serial port"
232 depends on SERIAL_CLPS711X=y
242 depends on PLAT_SAMSUNG || ARCH_EXYNOS
245 Support for the on-chip UARTs on the Samsung S3C24XX series CPUs,
247 provide all of these ports, depending on how the serial port
252 depends on PLAT_SAMSUNG
259 depends on PLAT_SAMSUNG
268 depends on SERIAL_SAMSUNG && DEBUG_LL
276 bool "Support for console on Samsung SoC serial port"
277 depends on SERIAL_SAMSUNG=y
280 Allow selection of the S3C24XX on-board serial ports for use as
292 depends on ARCH_SIRF
295 Support for the on-chip UART on the CSR SiRFprimaII series,
297 provide all of these ports, depending on how the serial port
301 bool "Support for console on SiRF SoC serial port"
302 depends on SERIAL_SIRFSOC=y
314 depends on ARCH_TEGRA && TEGRA20_APB_DMA
317 Support for the on-chip UARTs on the NVIDIA Tegra series SOCs
319 provide all of these ports, depending on how the serial port
325 depends on SPI
332 depends on SPI_MASTER
346 depends on MACH_DECSTATION && 32BIT
354 bool "Support console on DECstation DZ serial driver"
355 depends on SERIAL_DZ=y
364 Note that the firmware uses ttyS3 as the serial console on
371 depends on MACH_DECSTATION
384 bool "Support for console on a DECstation Z85C30 serial port"
385 depends on SERIAL_ZS=y
394 Note that the firmware uses ttyS1 as the serial console on the
395 Maxine and ttyS3 on the others using this driver.
401 depends on FOOTBRIDGE
404 If you have a machine based on a 21285 (Footbridge) StrongARM(R)/
409 bool "Console on DC21285 serial port"
410 depends on SERIAL_21285=y
413 If you have enabled the serial port on the 21285 footbridge you can
425 depends on MV64X60
431 bool "Support for console on Marvell MPSC serial port"
432 depends on SERIAL_MPSC
435 Say Y here if you want to support a serial console on a Marvell MPSC.
439 depends on ARCH_PXA || ARCH_MMP
442 If you have a machine based on an Intel XScale PXA2xx CPU you
446 bool "Console on PXA serial port"
447 depends on SERIAL_PXA
450 If you have enabled the serial port on the Intel XScale PXA
462 depends on ARCH_SA1100
465 If you have a machine based on a SA1100/SA1110 StrongARM(R) CPU you
471 bool "Console on SA1100 serial port"
472 depends on SERIAL_SA1100
475 If you have enabled the serial port on the SA1100/SA1110 StrongARM
487 depends on SPI_DW_PCI
491 This is the UART protocol driver for the MAX3110 device on
497 depends on PCI
502 depends on SERIAL_MFD_HSU=y
507 depends on BLACKFIN
511 Add support for the built-in UARTs on the Blackfin.
517 bool "Console on Blackfin serial port"
518 depends on SERIAL_BFIN=y
523 depends on SERIAL_BFIN
531 depends on !DMA_UNCACHED_NONE && KGDB_SERIAL_CONSOLE=n
545 depends on SERIAL_BFIN
551 depends on SERIAL_BFIN_UART0
557 depends on SERIAL_BFIN && (!BF531 && !BF532 && !BF533 && !BF561)
563 depends on SERIAL_BFIN_UART1
569 depends on SERIAL_BFIN && (BF54x || BF538 || BF539)
575 depends on SERIAL_BFIN_UART2
581 depends on SERIAL_BFIN && (BF54x)
587 depends on SERIAL_BFIN_UART3
593 depends on ARCH_MXC
597 If you have a machine based on a Motorola IMX CPU you
601 bool "Console on IMX serial port"
602 depends on SERIAL_IMX=y
605 If you have enabled the serial port on the Freescale IMX
616 depends on PPC32 || MICROBLAZE || MFD_TIMBERDALE || ARCH_ZYNQ
625 bool "Support for console on Xilinx uartlite serial port"
626 depends on SERIAL_UARTLITE=y
635 depends on SPARC
642 depends on SPARC
644 This driver supports the Zilog8530 serial ports found on many Sparc
648 bool "Console on Sun Zilog8530 serial port"
649 depends on SERIAL_SUNZILOG=y
652 on your Sparc system as the console, you can do so by answering
657 depends on SPARC && PCI
660 mouse on (PCI) UltraSPARC systems. Say Y or M if you want to be able
664 bool "Console on Sun SU serial port"
665 depends on SERIAL_SUNSU=y
668 on your Sparc system as the console, you can do so by answering
673 depends on GSC
685 2. Edit the /etc/inittab to start a getty listening on /dev/ttyB0
686 3. Add device ttyB0 to /etc/securetty (if you want to log on as
687 root on this console.)
691 bool "Support for console on serial MUX"
692 depends on SERIAL_MUX=y
698 depends on PARISC && !SERIAL_MUX && VT
707 2. Edit the /etc/inittab to start a getty listening on /dev/ttyB0
708 3. Add device ttyB0 to /etc/securetty (if you want to log on as
709 root on this console.)
714 depends on SPARC && PCI
716 This driver supports the Siemens SAB82532 DUSCC serial ports on newer
721 bool "Console on Sun Siemens SAB82532 serial port"
722 depends on SERIAL_SUNSAB=y
725 on your Sparc system as the console, you can do so by answering
730 depends on SPARC64
732 This driver supports the console device found on SUN4V Sparc
737 depends on SGI_HAS_ZILOG
740 This driver supports the Zilog8530 serial ports found on SGI
744 bool "Console on SGI Zilog8530 serial port"
745 depends on SERIAL_IP22_ZILOG=y
750 depends on SUPERH || ARCH_SHMOBILE || COMPILE_TEST
755 depends on SERIAL_SH_SCI
759 bool "Support for console on SuperH SCI(F)"
760 depends on SERIAL_SH_SCI=y
765 depends on SERIAL_SH_SCI && SH_DMAE
769 depends on SOC_PNX833X
777 depends on SERIAL_PNX8XXX
785 depends on ARCH_LPC32XX && OF
789 Those are UARTs completely different from the Standard UARTs on the
795 depends on SERIAL_HS_LPC32XX=y
799 ports on the LPC32XX as the console, you can do so by answering
813 depends on M68328 || M68EZ328 || M68VZ328
819 bool "Support RTS/CTS on 68328 serial port"
820 depends on SERIAL_68328
824 depends on COLDFIRE
831 depends on SERIAL_MCF
840 depends on SERIAL_MCF
847 depends on (M68K && MAC) || (PPC_OF && PPC_PMAC)
850 This driver supports the Zilog z85C30 serial ports found on
856 depends on SERIAL_PMACZILOG
858 The pmac_zilog driver for the z85C30 chip on many powermacs
868 access the built-in serial ports on powermacs will need to
876 Say N unless you need the z85c30 ports on your (Power)Mac
880 bool "Console on Mac or PowerMac z85c30 serial port"
881 depends on SERIAL_PMACZILOG=y
885 on your (Power)Mac as the console, you can do so by answering
890 depends on CPM2 || 8xx
893 This driver supports the SCC and SMC serial ports on Motorola
897 bool "Support for console on CPM SCC/SMC serial port"
898 depends on SERIAL_CPM=y
914 depends on IA64_GENERIC || IA64_SGI_SN2
924 depends on PPC_MPC52xx || PPC_MPC512x
933 bool "Console on a Freescale MPC52xx/MPC512x family PSC serial port"
934 depends on SERIAL_MPC52xx=y
942 depends on SERIAL_MPC52xx_CONSOLE=y
951 depends on PCI && PPC_PSERIES
964 depends on M32R
972 depends on SERIAL_M32R_SIO=y
981 bool "M32R SIO I/F on a PLD"
982 depends on SERIAL_M32R_SIO=y && (PLAT_OPSPUT || PLAT_USRV || PLAT_M32700UT)
986 on a PLD (Programmable Logic Device).
993 depends on HAS_TXX9_SERIAL
1002 depends on SERIAL_TXX9
1007 depends on SERIAL_TXX9=y
1012 depends on !SERIAL_8250 && SERIAL_TXX9
1016 depends on CPU_VR41XX
1025 depends on SERIAL_VR41XX=y
1029 a console on a serial port, say Y. Otherwise, say N.
1033 depends on PCI
1049 depends on (IA64_GENERIC || IA64_SGI_SN2) && SGI_IOC4
1053 and wish to use the serial ports on this card, say Y.
1058 depends on (IA64_GENERIC || IA64_SGI_SN2) && SGI_IOC3
1065 bool "MSM on-chip serial port support"
1066 depends on ARCH_MSM || ARCH_QCOM
1071 depends on SERIAL_MSM=y
1077 depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
1080 If you have a machine based on MSM family of SoCs, you
1088 bool "VIA VT8500 on-chip serial port support"
1089 depends on ARCH_VT8500
1094 depends on SERIAL_VT8500=y
1099 depends on ARCH_NETX
1102 If you have a machine based on a Hilscher NetX SoC you
1109 bool "Console on NetX serial port"
1110 depends on SERIAL_NETX=y
1113 If you have enabled the serial port on the Hilscher NetX SoC
1117 tristate "Serial port on Open Firmware platform bus"
1118 depends on OF
1119 depends on SERIAL_8250 || SERIAL_OF_PLATFORM_NWPSERIAL
1122 on a platform specific bus, you should enable this option.
1128 depends on ARCH_OMAP2PLUS
1131 If you have a machine based on an Texas Instruments OMAP CPU you
1139 bool "Console on OMAP serial port"
1140 depends on SERIAL_OMAP=y
1155 depends on PPC_OF && PPC_DCR
1164 bool "Console on NWP serial port"
1165 depends on SERIAL_OF_PLATFORM_NWPSERIAL=y
1168 Support for Console on the NWP serial ports.
1172 depends on LANTIQ
1176 Support for console and UART on Lantiq SoCs.
1180 depends on QUICC_ENGINE
1185 This driver supports the QE serial ports on Freescale embedded
1197 bool "Console on SCCNXP serial port"
1198 depends on SERIAL_SCCNXP=y
1201 Support for console on SCCNXP serial ports.
1205 depends on I2C
1215 depends on BLACKFIN
1218 Enable SPORT emulate UART on Blackfin series.
1224 bool "Console on Blackfin sport emulated uart"
1225 depends on SERIAL_BFIN_SPORT=y
1230 depends on SERIAL_BFIN_SPORT && !(BF542 || BF544)
1236 depends on SERIAL_BFIN_SPORT0_UART
1242 depends on SERIAL_BFIN_SPORT
1248 depends on SERIAL_BFIN_SPORT1_UART
1254 depends on SERIAL_BFIN_SPORT && (BF54x || BF538 || BF539)
1260 depends on SERIAL_BFIN_SPORT2_UART
1266 depends on SERIAL_BFIN_SPORT && (BF54x || BF538 || BF539)
1272 depends on SERIAL_BFIN_SPORT3_UART
1279 depends on X86_32 || COMPILE_TEST
1281 Add support for UART controller on timberdale.
1286 depends on BCM63XX
1295 bool "Console on bcm63xx serial port"
1296 depends on SERIAL_BCM63XX=y
1299 If you have enabled the serial port on the bcm63xx CPU
1304 depends on OF && SPARC
1310 bool "Console on GRLIB APBUART serial port"
1311 depends on SERIAL_GRLIB_GAISLER_APBUART=y
1314 Support for running a console on the GRLIB APBUART
1324 depends on SERIAL_ALTERA_JTAGUART=y
1331 depends on SERIAL_ALTERA_JTAGUART_CONSOLE
1345 depends on SERIAL_ALTERA_UART
1354 depends on SERIAL_ALTERA_UART
1363 depends on SERIAL_ALTERA_UART=y
1370 depends on GPIOLIB && SPI
1372 Support for the IFX6x60 modem devices on Intel MID platforms.
1376 depends on PCI && (X86_32 || COMPILE_TEST)
1391 bool "Support for console on Intel EG20T PCH UART/OKI SEMICONDUCTOR ML7213 IOH"
1392 depends on SERIAL_PCH_UART=y
1402 depends on MSM_SMD
1408 depends on ARCH_MXS
1416 depends on SERIAL_MXS_AUART=y
1423 depends on OF
1431 depends on SERIAL_XILINX_PS_UART=y
1439 depends on HAVE_CLK && SOC_AR933X
1449 bool "Console on AR933X serial port"
1450 depends on SERIAL_AR933X=y
1457 depends on SERIAL_AR933X
1465 depends on ARM && (ARCH_EFM32 || COMPILE_TEST)
1468 This driver support the USART and UART ports on
1473 depends on SERIAL_EFM32_UART=y
1477 tristate "TILE-Gx on-chip serial port support"
1478 depends on TILEGX
1482 This device provides access to the on-chip UARTs on the TILE-Gx
1489 Driver for on-chip UART for ARC(Synopsys) for the legacy
1493 bool "Console on ARC UART"
1494 depends on SERIAL_ARC=y
1498 Enable system Console on ARC UART
1502 depends on SERIAL_ARC
1511 depends on PCI
1527 depends on SERIAL_RP2
1535 depends on HAS_DMA
1538 Support for the on-chip lpuart on some Freescale SOCs.
1541 bool "Console on Freescale lpuart serial port"
1542 depends on SERIAL_FSL_LPUART=y
1545 If you have enabled the lpuart serial port on the Freescale SoCs,
1551 depends on ARM || COMPILE_TEST
1553 This driver is for the on-chip Asychronous Serial Controller on
1561 bool "Support for console on ST ASC"
1562 depends on SERIAL_ST_ASC=y
1568 depends on MCB
1571 on a MCB carrier.