Lines Matching refs:serial
14 the console before standard serial driver is probed. The console is
17 source "drivers/tty/serial/8250/Kconfig"
19 comment "Non-8250 serial port support"
22 tristate "ARM AMBA PL010 serial port support"
33 bool "Support for console on AMBA serial port"
49 tristate "ARM AMBA PL011 serial port support"
60 bool "Support for console on AMBA serial port"
84 the console before standard serial driver is probed. This is enabled
89 tristate "BCM1xxx on-chip DUART serial support"
94 Support for the asynchronous serial interface (DUART) included in
104 bool "Support for console on a BCM1xxx DUART serial port"
109 If you say Y here, it will be possible to use a serial port as the
117 bool "AT91 / AT32 on-chip serial port support"
126 bool "Support for console on AT91 / AT32 serial port"
136 bool "Support DMA transfers on AT91 / AT32 serial port"
141 and from the Atmel AT91 / AT32 serial port. In order to
159 The ttySn nodes are legally reserved for the 8250 serial driver
160 but are often misused by other serial drivers.
187 bool "Micrel KS8695 (Centaur) serial port support"
194 bool "Support for console on KS8695 (Centaur) serial port"
204 tristate "Meson serial port support"
222 tristate "CLPS711X serial port support"
231 bool "Support for console on CLPS711X serial port"
241 tristate "Samsung SoC serial support"
247 provide all of these ports, depending on how the serial port
264 serial driver
267 bool "Samsung SoC serial debug"
270 Add support for debugging the serial driver. Since this is
276 bool "Support for console on Samsung SoC serial port"
280 Allow selection of the S3C24XX on-board serial ports for use as
297 provide all of these ports, depending on how the serial port
301 bool "Support for console on SiRF SoC serial port"
313 tristate "NVIDIA Tegra20/30 SoC serial controller"
319 provide all of these ports, depending on how the serial port
345 bool "DECstation DZ serial driver"
350 DZ11-family serial controllers for DECstations and VAXstations,
354 bool "Support console on DECstation DZ serial driver"
359 If you say Y here, it will be possible to use a serial port as the
364 Note that the firmware uses ttyS3 as the serial console on
370 tristate "DECstation Z85C30 serial support"
375 Support for the Zilog 85C350 serial communications controller used
376 for serial ports in newer DECstation systems. These include the
384 bool "Support for console on a DECstation Z85C30 serial port"
389 If you say Y here, it will be possible to use a serial port as the
394 Note that the firmware uses ttyS1 as the serial console on the
400 tristate "DC21285 serial port support"
405 PCI bridge you can enable its onboard serial port by enabling this
409 bool "Console on DC21285 serial port"
413 If you have enabled the serial port on the 21285 footbridge you can
424 bool "Marvell MPSC serial port support"
428 Say Y here if you want to use the Marvell MPSC serial controller.
431 bool "Support for console on Marvell MPSC serial port"
435 Say Y here if you want to support a serial console on a Marvell MPSC.
438 bool "PXA serial port support"
443 can enable its onboard serial ports by enabling this option.
446 bool "Console on PXA serial port"
450 If you have enabled the serial port on the Intel XScale PXA
461 bool "SA1100 serial port support"
466 can enable its onboard serial port by enabling this option.
471 bool "Console on SA1100 serial port"
475 If you have enabled the serial port on the SA1100/SA1110 StrongARM
501 boolean "Medfile HSU serial console support"
506 tristate "Blackfin serial port support"
517 bool "Console on Blackfin serial port"
526 This driver supports the built-in serial ports of the Blackfin family
592 tristate "IMX serial port support"
598 can enable its onboard serial port by enabling this option.
601 bool "Console on IMX serial port"
605 If you have enabled the serial port on the Freescale IMX
615 tristate "Xilinx uartlite serial port support"
619 Say Y here if you want to use the Xilinx uartlite serial controller.
625 bool "Support for console on Xilinx uartlite serial port"
641 tristate "Sun Zilog8530 serial support"
644 This driver supports the Zilog8530 serial ports found on many Sparc
645 systems. Say Y or M if you want to be able to these serial ports.
648 bool "Console on Sun Zilog8530 serial port"
651 If you would like to be able to use the Zilog8530 serial port
656 tristate "Sun SU serial support"
659 This driver supports the 8250 serial ports that run the keyboard and
661 to these serial ports.
664 bool "Console on Sun SU serial port"
667 If you would like to be able to use the SU serial port
677 Saying Y here will enable the hardware MUX serial driver for
691 bool "Support for console on serial MUX"
713 tristate "Sun Siemens SAB82532 serial support"
716 This driver supports the Siemens SAB82532 DUSCC serial ports on newer
718 serial ports.
721 bool "Console on Sun Siemens SAB82532 serial port"
724 If you would like to be able to use the SAB82532 serial port
736 tristate "SGI Zilog8530 serial support"
740 This driver supports the Zilog8530 serial ports found on SGI
741 systems. Say Y or M if you want to be able to these serial ports.
744 bool "Console on SGI Zilog8530 serial port"
749 tristate "SuperH SCI(F) serial port support"
754 int "Maximum number of SCI(F) serial ports"
773 to use serial ports, say Y. Otherwise, say N.
776 bool "Enable PNX8XX0 serial console"
781 to use serial console, say Y. Otherwise, say N.
784 tristate "LPC32XX high speed serial port support"
788 Support for the LPC32XX high speed serial ports (up to 900kbps).
794 bool "Enable LPC32XX high speed UART serial console"
798 If you would like to be able to use one of the high speed serial
812 bool "68328 serial support"
815 This driver supports the built-in serial port of the Motorola 68328
819 bool "Support RTS/CTS on 68328 serial port"
823 bool "Coldfire serial support"
827 This serial driver supports the Freescale Coldfire serial ports.
830 int "Default baudrate for Coldfire serial ports"
835 ColdFire serial ports. The usual default varies from board to board,
839 bool "Coldfire serial console support"
843 Enable a ColdFire internal serial port to be the system console.
850 This driver supports the Zilog z85C30 serial ports found on
852 Say Y or M if you want to be able to these serial ports.
860 8250 serial port driver also uses these numbers, which means
868 access the built-in serial ports on powermacs will need to
880 bool "Console on Mac or PowerMac z85c30 serial port"
884 If you would like to be able to use the z85c30 serial port
889 tristate "CPM SCC/SMC serial port support"
893 This driver supports the SCC and SMC serial ports on Motorola
897 bool "Support for console on CPM SCC/SMC serial port"
913 bool "SGI Altix L1 serial console support"
919 controller serial port as your console (you want this!),
923 tristate "Freescale MPC52xx/MPC512x family PSC serial support"
927 This driver supports MPC52xx and MPC512x PSC serial ports. If you would
933 bool "Console on a Freescale MPC52xx/MPC512x family PSC serial port"
937 Select this options if you'd like to use one of the PSC serial port
941 int "Freescale MPC52xx/MPC512x family PSC serial port baud"
955 This driver is for a family of multiport serial adapters
968 Say Y here if you want to use the M32R serial controller.
975 Say Y here if you want to support a serial console.
985 Say Y here if you want to use the M32R serial controller
1011 bool "TX39XX/49XX SIO act as standard serial"
1029 a console on a serial port, say Y. Otherwise, say N.
1037 of cards which provide multiple serial ports. You would need
1048 tristate "SGI IOC4 controller serial support"
1053 and wish to use the serial ports on this card, say Y.
1057 tristate "SGI Altix IOC3 serial support"
1061 If you have an SGI Altix with an IOC3 serial card,
1065 bool "MSM on-chip serial port support"
1070 bool "MSM serial console support"
1081 can enable its onboard high speed serial port by enabling
1088 bool "VIA VT8500 on-chip serial port support"
1093 bool "VIA VT8500 serial console support"
1098 tristate "NetX serial port support"
1103 can enable its onboard serial port by enabling this option.
1106 module will be called netx-serial.
1109 bool "Console on NetX serial port"
1113 If you have enabled the serial port on the Hilscher NetX SoC
1121 If you have a PowerPC based system that has serial ports
1127 tristate "OMAP serial port support"
1132 can enable its onboard serial ports by enabling this option.
1135 with the omap-serial driver. DMA support can be enabled from platform
1139 bool "Console on OMAP serial port"
1143 Select this option if you would like to use omap serial port as
1154 tristate "NWP serial port driver"
1160 This driver supports the cell network processor nwp serial
1164 bool "Console on NWP serial port"
1168 Support for Console on the NWP serial ports.
1171 bool "Lantiq serial driver"
1179 tristate "Freescale QUICC Engine serial port support"
1185 This driver supports the QE serial ports on Freescale embedded
1189 tristate "SCCNXP serial port support"
1197 bool "Console on SCCNXP serial port"
1201 Support for console on SCCNXP serial ports.
1204 tristate "SC16IS7xx serial support"
1209 This selects support for SC16IS7xx serial ports.
1284 tristate "bcm63xx serial port support"
1289 serial port by enabling this options.
1295 bool "Console on bcm63xx serial port"
1299 If you have enabled the serial port on the bcm63xx CPU
1303 tristate "GRLIB APBUART serial support"
1307 Add support for the GRLIB APBUART serial port.
1310 bool "Console on GRLIB APBUART serial port"
1438 tristate "AR933X serial port support"
1449 bool "Console on AR933X serial port"
1456 int "Maximum number of AR933X serial ports"
1460 Set this to the number of serial ports you want the driver
1477 tristate "TILE-Gx on-chip serial port support"
1506 Set this to the number of serial ports you want the driver
1515 RocketPort INFINITY families of PCI/PCIe multiport serial adapters.
1534 tristate "Freescale lpuart serial port support"
1541 bool "Console on Freescale lpuart serial port"
1545 If you have enabled the lpuart serial port on the Freescale SoCs,
1549 tristate "ST ASC serial port support"