1 /*
2 * misc setup functions for MPC83xx
3 *
4 * Maintainer: Kumar Gala <galak@kernel.crashing.org>
5 *
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms of the GNU General Public License as published by the
8 * Free Software Foundation; either version 2 of the License, or (at your
9 * option) any later version.
10 */
11
12 #include <linux/stddef.h>
13 #include <linux/kernel.h>
14 #include <linux/of_platform.h>
15 #include <linux/pci.h>
16
17 #include <asm/io.h>
18 #include <asm/hw_irq.h>
19 #include <asm/ipic.h>
20 #include <asm/qe_ic.h>
21 #include <sysdev/fsl_soc.h>
22 #include <sysdev/fsl_pci.h>
23
24 #include "mpc83xx.h"
25
26 static __be32 __iomem *restart_reg_base;
27
mpc83xx_restart_init(void)28 static int __init mpc83xx_restart_init(void)
29 {
30 /* map reset restart_reg_baseister space */
31 restart_reg_base = ioremap(get_immrbase() + 0x900, 0xff);
32
33 return 0;
34 }
35
36 arch_initcall(mpc83xx_restart_init);
37
mpc83xx_restart(char * cmd)38 void mpc83xx_restart(char *cmd)
39 {
40 #define RST_OFFSET 0x00000900
41 #define RST_PROT_REG 0x00000018
42 #define RST_CTRL_REG 0x0000001c
43
44 local_irq_disable();
45
46 if (restart_reg_base) {
47 /* enable software reset "RSTE" */
48 out_be32(restart_reg_base + (RST_PROT_REG >> 2), 0x52535445);
49
50 /* set software hard reset */
51 out_be32(restart_reg_base + (RST_CTRL_REG >> 2), 0x2);
52 } else {
53 printk (KERN_EMERG "Error: Restart registers not mapped, spinning!\n");
54 }
55
56 for (;;) ;
57 }
58
mpc83xx_time_init(void)59 long __init mpc83xx_time_init(void)
60 {
61 #define SPCR_OFFSET 0x00000110
62 #define SPCR_TBEN 0x00400000
63 __be32 __iomem *spcr = ioremap(get_immrbase() + SPCR_OFFSET, 4);
64 __be32 tmp;
65
66 tmp = in_be32(spcr);
67 out_be32(spcr, tmp | SPCR_TBEN);
68
69 iounmap(spcr);
70
71 return 0;
72 }
73
mpc83xx_ipic_init_IRQ(void)74 void __init mpc83xx_ipic_init_IRQ(void)
75 {
76 struct device_node *np;
77
78 /* looking for fsl,pq2pro-pic which is asl compatible with fsl,ipic */
79 np = of_find_compatible_node(NULL, NULL, "fsl,ipic");
80 if (!np)
81 np = of_find_node_by_type(NULL, "ipic");
82 if (!np)
83 return;
84
85 ipic_init(np, 0);
86
87 of_node_put(np);
88
89 /* Initialize the default interrupt mapping priorities,
90 * in case the boot rom changed something on us.
91 */
92 ipic_set_default_priority();
93 }
94
95 #ifdef CONFIG_QUICC_ENGINE
mpc83xx_qe_init_IRQ(void)96 void __init mpc83xx_qe_init_IRQ(void)
97 {
98 struct device_node *np;
99
100 np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
101 if (!np) {
102 np = of_find_node_by_type(NULL, "qeic");
103 if (!np)
104 return;
105 }
106 qe_ic_init(np, 0, qe_ic_cascade_low_ipic, qe_ic_cascade_high_ipic);
107 of_node_put(np);
108 }
109
mpc83xx_ipic_and_qe_init_IRQ(void)110 void __init mpc83xx_ipic_and_qe_init_IRQ(void)
111 {
112 mpc83xx_ipic_init_IRQ();
113 mpc83xx_qe_init_IRQ();
114 }
115 #endif /* CONFIG_QUICC_ENGINE */
116
117 static const struct of_device_id of_bus_ids[] __initconst = {
118 { .type = "soc", },
119 { .compatible = "soc", },
120 { .compatible = "simple-bus" },
121 { .compatible = "gianfar" },
122 { .compatible = "gpio-leds", },
123 { .type = "qe", },
124 { .compatible = "fsl,qe", },
125 {},
126 };
127
mpc83xx_declare_of_platform_devices(void)128 int __init mpc83xx_declare_of_platform_devices(void)
129 {
130 of_platform_bus_probe(NULL, of_bus_ids, NULL);
131 return 0;
132 }
133
134 #ifdef CONFIG_PCI
mpc83xx_setup_pci(void)135 void __init mpc83xx_setup_pci(void)
136 {
137 struct device_node *np;
138
139 for_each_compatible_node(np, "pci", "fsl,mpc8349-pci")
140 mpc83xx_add_bridge(np);
141 for_each_compatible_node(np, "pci", "fsl,mpc8314-pcie")
142 mpc83xx_add_bridge(np);
143 }
144 #endif
145