1 /*
2 * OMAP2/3 System Control Module register access
3 *
4 * Copyright (C) 2007, 2012 Texas Instruments, Inc.
5 * Copyright (C) 2007 Nokia Corporation
6 *
7 * Written by Paul Walmsley
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License version 2 as
11 * published by the Free Software Foundation.
12 */
13 #undef DEBUG
14
15 #include <linux/kernel.h>
16 #include <linux/io.h>
17
18 #include "soc.h"
19 #include "iomap.h"
20 #include "common.h"
21 #include "cm-regbits-34xx.h"
22 #include "prm-regbits-34xx.h"
23 #include "prm3xxx.h"
24 #include "cm3xxx.h"
25 #include "sdrc.h"
26 #include "pm.h"
27 #include "control.h"
28
29 /* Used by omap3_ctrl_save_padconf() */
30 #define START_PADCONF_SAVE 0x2
31 #define PADCONF_SAVE_DONE 0x1
32
33 static void __iomem *omap2_ctrl_base;
34 static void __iomem *omap4_ctrl_pad_base;
35
36 #if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
37 struct omap3_scratchpad {
38 u32 boot_config_ptr;
39 u32 public_restore_ptr;
40 u32 secure_ram_restore_ptr;
41 u32 sdrc_module_semaphore;
42 u32 prcm_block_offset;
43 u32 sdrc_block_offset;
44 };
45
46 struct omap3_scratchpad_prcm_block {
47 u32 prm_contents[2];
48 u32 cm_contents[11];
49 u32 prcm_block_size;
50 };
51
52 struct omap3_scratchpad_sdrc_block {
53 u16 sysconfig;
54 u16 cs_cfg;
55 u16 sharing;
56 u16 err_type;
57 u32 dll_a_ctrl;
58 u32 dll_b_ctrl;
59 u32 power;
60 u32 cs_0;
61 u32 mcfg_0;
62 u16 mr_0;
63 u16 emr_1_0;
64 u16 emr_2_0;
65 u16 emr_3_0;
66 u32 actim_ctrla_0;
67 u32 actim_ctrlb_0;
68 u32 rfr_ctrl_0;
69 u32 cs_1;
70 u32 mcfg_1;
71 u16 mr_1;
72 u16 emr_1_1;
73 u16 emr_2_1;
74 u16 emr_3_1;
75 u32 actim_ctrla_1;
76 u32 actim_ctrlb_1;
77 u32 rfr_ctrl_1;
78 u16 dcdl_1_ctrl;
79 u16 dcdl_2_ctrl;
80 u32 flags;
81 u32 block_size;
82 };
83
84 void *omap3_secure_ram_storage;
85
86 /*
87 * This is used to store ARM registers in SDRAM before attempting
88 * an MPU OFF. The save and restore happens from the SRAM sleep code.
89 * The address is stored in scratchpad, so that it can be used
90 * during the restore path.
91 */
92 u32 omap3_arm_context[128];
93
94 struct omap3_control_regs {
95 u32 sysconfig;
96 u32 devconf0;
97 u32 mem_dftrw0;
98 u32 mem_dftrw1;
99 u32 msuspendmux_0;
100 u32 msuspendmux_1;
101 u32 msuspendmux_2;
102 u32 msuspendmux_3;
103 u32 msuspendmux_4;
104 u32 msuspendmux_5;
105 u32 sec_ctrl;
106 u32 devconf1;
107 u32 csirxfe;
108 u32 iva2_bootaddr;
109 u32 iva2_bootmod;
110 u32 debobs_0;
111 u32 debobs_1;
112 u32 debobs_2;
113 u32 debobs_3;
114 u32 debobs_4;
115 u32 debobs_5;
116 u32 debobs_6;
117 u32 debobs_7;
118 u32 debobs_8;
119 u32 prog_io0;
120 u32 prog_io1;
121 u32 dss_dpll_spreading;
122 u32 core_dpll_spreading;
123 u32 per_dpll_spreading;
124 u32 usbhost_dpll_spreading;
125 u32 pbias_lite;
126 u32 temp_sensor;
127 u32 sramldo4;
128 u32 sramldo5;
129 u32 csi;
130 u32 padconf_sys_nirq;
131 };
132
133 static struct omap3_control_regs control_context;
134 #endif /* CONFIG_ARCH_OMAP3 && CONFIG_PM */
135
136 #define OMAP_CTRL_REGADDR(reg) (omap2_ctrl_base + (reg))
137 #define OMAP4_CTRL_PAD_REGADDR(reg) (omap4_ctrl_pad_base + (reg))
138
omap2_set_globals_control(void __iomem * ctrl,void __iomem * ctrl_pad)139 void __init omap2_set_globals_control(void __iomem *ctrl,
140 void __iomem *ctrl_pad)
141 {
142 omap2_ctrl_base = ctrl;
143 omap4_ctrl_pad_base = ctrl_pad;
144 }
145
omap_ctrl_base_get(void)146 void __iomem *omap_ctrl_base_get(void)
147 {
148 return omap2_ctrl_base;
149 }
150
omap_ctrl_readb(u16 offset)151 u8 omap_ctrl_readb(u16 offset)
152 {
153 return readb_relaxed(OMAP_CTRL_REGADDR(offset));
154 }
155
omap_ctrl_readw(u16 offset)156 u16 omap_ctrl_readw(u16 offset)
157 {
158 return readw_relaxed(OMAP_CTRL_REGADDR(offset));
159 }
160
omap_ctrl_readl(u16 offset)161 u32 omap_ctrl_readl(u16 offset)
162 {
163 return readl_relaxed(OMAP_CTRL_REGADDR(offset));
164 }
165
omap_ctrl_writeb(u8 val,u16 offset)166 void omap_ctrl_writeb(u8 val, u16 offset)
167 {
168 writeb_relaxed(val, OMAP_CTRL_REGADDR(offset));
169 }
170
omap_ctrl_writew(u16 val,u16 offset)171 void omap_ctrl_writew(u16 val, u16 offset)
172 {
173 writew_relaxed(val, OMAP_CTRL_REGADDR(offset));
174 }
175
omap_ctrl_writel(u32 val,u16 offset)176 void omap_ctrl_writel(u32 val, u16 offset)
177 {
178 writel_relaxed(val, OMAP_CTRL_REGADDR(offset));
179 }
180
181 /*
182 * On OMAP4 control pad are not addressable from control
183 * core base. So the common omap_ctrl_read/write APIs breaks
184 * Hence export separate APIs to manage the omap4 pad control
185 * registers. This APIs will work only for OMAP4
186 */
187
omap4_ctrl_pad_readl(u16 offset)188 u32 omap4_ctrl_pad_readl(u16 offset)
189 {
190 return readl_relaxed(OMAP4_CTRL_PAD_REGADDR(offset));
191 }
192
omap4_ctrl_pad_writel(u32 val,u16 offset)193 void omap4_ctrl_pad_writel(u32 val, u16 offset)
194 {
195 writel_relaxed(val, OMAP4_CTRL_PAD_REGADDR(offset));
196 }
197
198 #ifdef CONFIG_ARCH_OMAP3
199
200 /**
201 * omap3_ctrl_write_boot_mode - set scratchpad boot mode for the next boot
202 * @bootmode: 8-bit value to pass to some boot code
203 *
204 * Set the bootmode in the scratchpad RAM. This is used after the
205 * system restarts. Not sure what actually uses this - it may be the
206 * bootloader, rather than the boot ROM - contrary to the preserved
207 * comment below. No return value.
208 */
omap3_ctrl_write_boot_mode(u8 bootmode)209 void omap3_ctrl_write_boot_mode(u8 bootmode)
210 {
211 u32 l;
212
213 l = ('B' << 24) | ('M' << 16) | bootmode;
214
215 /*
216 * Reserve the first word in scratchpad for communicating
217 * with the boot ROM. A pointer to a data structure
218 * describing the boot process can be stored there,
219 * cf. OMAP34xx TRM, Initialization / Software Booting
220 * Configuration.
221 *
222 * XXX This should use some omap_ctrl_writel()-type function
223 */
224 writel_relaxed(l, OMAP2_L4_IO_ADDRESS(OMAP343X_SCRATCHPAD + 4));
225 }
226
227 #endif
228
229 /**
230 * omap_ctrl_write_dsp_boot_addr - set boot address for a remote processor
231 * @bootaddr: physical address of the boot loader
232 *
233 * Set boot address for the boot loader of a supported processor
234 * when a power ON sequence occurs.
235 */
omap_ctrl_write_dsp_boot_addr(u32 bootaddr)236 void omap_ctrl_write_dsp_boot_addr(u32 bootaddr)
237 {
238 u32 offset = cpu_is_omap243x() ? OMAP243X_CONTROL_IVA2_BOOTADDR :
239 cpu_is_omap34xx() ? OMAP343X_CONTROL_IVA2_BOOTADDR :
240 cpu_is_omap44xx() ? OMAP4_CTRL_MODULE_CORE_DSP_BOOTADDR :
241 soc_is_omap54xx() ? OMAP4_CTRL_MODULE_CORE_DSP_BOOTADDR :
242 0;
243
244 if (!offset) {
245 pr_err("%s: unsupported omap type\n", __func__);
246 return;
247 }
248
249 omap_ctrl_writel(bootaddr, offset);
250 }
251
252 /**
253 * omap_ctrl_write_dsp_boot_mode - set boot mode for a remote processor
254 * @bootmode: 8-bit value to pass to some boot code
255 *
256 * Sets boot mode for the boot loader of a supported processor
257 * when a power ON sequence occurs.
258 */
omap_ctrl_write_dsp_boot_mode(u8 bootmode)259 void omap_ctrl_write_dsp_boot_mode(u8 bootmode)
260 {
261 u32 offset = cpu_is_omap243x() ? OMAP243X_CONTROL_IVA2_BOOTMOD :
262 cpu_is_omap34xx() ? OMAP343X_CONTROL_IVA2_BOOTMOD :
263 0;
264
265 if (!offset) {
266 pr_err("%s: unsupported omap type\n", __func__);
267 return;
268 }
269
270 omap_ctrl_writel(bootmode, offset);
271 }
272
273 #if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
274 /*
275 * Clears the scratchpad contents in case of cold boot-
276 * called during bootup
277 */
omap3_clear_scratchpad_contents(void)278 void omap3_clear_scratchpad_contents(void)
279 {
280 u32 max_offset = OMAP343X_SCRATCHPAD_ROM_OFFSET;
281 void __iomem *v_addr;
282 u32 offset = 0;
283
284 v_addr = OMAP2_L4_IO_ADDRESS(OMAP343X_SCRATCHPAD_ROM);
285 if (omap3xxx_prm_clear_global_cold_reset()) {
286 for ( ; offset <= max_offset; offset += 0x4)
287 writel_relaxed(0x0, (v_addr + offset));
288 }
289 }
290
291 /* Populate the scratchpad structure with restore structure */
omap3_save_scratchpad_contents(void)292 void omap3_save_scratchpad_contents(void)
293 {
294 void __iomem *scratchpad_address;
295 u32 arm_context_addr;
296 struct omap3_scratchpad scratchpad_contents;
297 struct omap3_scratchpad_prcm_block prcm_block_contents;
298 struct omap3_scratchpad_sdrc_block sdrc_block_contents;
299
300 /*
301 * Populate the Scratchpad contents
302 *
303 * The "get_*restore_pointer" functions are used to provide a
304 * physical restore address where the ROM code jumps while waking
305 * up from MPU OFF/OSWR state.
306 * The restore pointer is stored into the scratchpad.
307 */
308 scratchpad_contents.boot_config_ptr = 0x0;
309 if (cpu_is_omap3630())
310 scratchpad_contents.public_restore_ptr =
311 virt_to_phys(omap3_restore_3630);
312 else if (omap_rev() != OMAP3430_REV_ES3_0 &&
313 omap_rev() != OMAP3430_REV_ES3_1 &&
314 omap_rev() != OMAP3430_REV_ES3_1_2)
315 scratchpad_contents.public_restore_ptr =
316 virt_to_phys(omap3_restore);
317 else
318 scratchpad_contents.public_restore_ptr =
319 virt_to_phys(omap3_restore_es3);
320
321 if (omap_type() == OMAP2_DEVICE_TYPE_GP)
322 scratchpad_contents.secure_ram_restore_ptr = 0x0;
323 else
324 scratchpad_contents.secure_ram_restore_ptr =
325 (u32) __pa(omap3_secure_ram_storage);
326 scratchpad_contents.sdrc_module_semaphore = 0x0;
327 scratchpad_contents.prcm_block_offset = 0x2C;
328 scratchpad_contents.sdrc_block_offset = 0x64;
329
330 /* Populate the PRCM block contents */
331 omap3_prm_save_scratchpad_contents(prcm_block_contents.prm_contents);
332 omap3_cm_save_scratchpad_contents(prcm_block_contents.cm_contents);
333
334 prcm_block_contents.prcm_block_size = 0x0;
335
336 /* Populate the SDRC block contents */
337 sdrc_block_contents.sysconfig =
338 (sdrc_read_reg(SDRC_SYSCONFIG) & 0xFFFF);
339 sdrc_block_contents.cs_cfg =
340 (sdrc_read_reg(SDRC_CS_CFG) & 0xFFFF);
341 sdrc_block_contents.sharing =
342 (sdrc_read_reg(SDRC_SHARING) & 0xFFFF);
343 sdrc_block_contents.err_type =
344 (sdrc_read_reg(SDRC_ERR_TYPE) & 0xFFFF);
345 sdrc_block_contents.dll_a_ctrl = sdrc_read_reg(SDRC_DLLA_CTRL);
346 sdrc_block_contents.dll_b_ctrl = 0x0;
347 /*
348 * Due to a OMAP3 errata (1.142), on EMU/HS devices SRDC should
349 * be programed to issue automatic self refresh on timeout
350 * of AUTO_CNT = 1 prior to any transition to OFF mode.
351 */
352 if ((omap_type() != OMAP2_DEVICE_TYPE_GP)
353 && (omap_rev() >= OMAP3430_REV_ES3_0))
354 sdrc_block_contents.power = (sdrc_read_reg(SDRC_POWER) &
355 ~(SDRC_POWER_AUTOCOUNT_MASK|
356 SDRC_POWER_CLKCTRL_MASK)) |
357 (1 << SDRC_POWER_AUTOCOUNT_SHIFT) |
358 SDRC_SELF_REFRESH_ON_AUTOCOUNT;
359 else
360 sdrc_block_contents.power = sdrc_read_reg(SDRC_POWER);
361
362 sdrc_block_contents.cs_0 = 0x0;
363 sdrc_block_contents.mcfg_0 = sdrc_read_reg(SDRC_MCFG_0);
364 sdrc_block_contents.mr_0 = (sdrc_read_reg(SDRC_MR_0) & 0xFFFF);
365 sdrc_block_contents.emr_1_0 = 0x0;
366 sdrc_block_contents.emr_2_0 = 0x0;
367 sdrc_block_contents.emr_3_0 = 0x0;
368 sdrc_block_contents.actim_ctrla_0 =
369 sdrc_read_reg(SDRC_ACTIM_CTRL_A_0);
370 sdrc_block_contents.actim_ctrlb_0 =
371 sdrc_read_reg(SDRC_ACTIM_CTRL_B_0);
372 sdrc_block_contents.rfr_ctrl_0 =
373 sdrc_read_reg(SDRC_RFR_CTRL_0);
374 sdrc_block_contents.cs_1 = 0x0;
375 sdrc_block_contents.mcfg_1 = sdrc_read_reg(SDRC_MCFG_1);
376 sdrc_block_contents.mr_1 = sdrc_read_reg(SDRC_MR_1) & 0xFFFF;
377 sdrc_block_contents.emr_1_1 = 0x0;
378 sdrc_block_contents.emr_2_1 = 0x0;
379 sdrc_block_contents.emr_3_1 = 0x0;
380 sdrc_block_contents.actim_ctrla_1 =
381 sdrc_read_reg(SDRC_ACTIM_CTRL_A_1);
382 sdrc_block_contents.actim_ctrlb_1 =
383 sdrc_read_reg(SDRC_ACTIM_CTRL_B_1);
384 sdrc_block_contents.rfr_ctrl_1 =
385 sdrc_read_reg(SDRC_RFR_CTRL_1);
386 sdrc_block_contents.dcdl_1_ctrl = 0x0;
387 sdrc_block_contents.dcdl_2_ctrl = 0x0;
388 sdrc_block_contents.flags = 0x0;
389 sdrc_block_contents.block_size = 0x0;
390
391 arm_context_addr = virt_to_phys(omap3_arm_context);
392
393 /* Copy all the contents to the scratchpad location */
394 scratchpad_address = OMAP2_L4_IO_ADDRESS(OMAP343X_SCRATCHPAD);
395 memcpy_toio(scratchpad_address, &scratchpad_contents,
396 sizeof(scratchpad_contents));
397 /* Scratchpad contents being 32 bits, a divide by 4 done here */
398 memcpy_toio(scratchpad_address +
399 scratchpad_contents.prcm_block_offset,
400 &prcm_block_contents, sizeof(prcm_block_contents));
401 memcpy_toio(scratchpad_address +
402 scratchpad_contents.sdrc_block_offset,
403 &sdrc_block_contents, sizeof(sdrc_block_contents));
404 /*
405 * Copies the address of the location in SDRAM where ARM
406 * registers get saved during a MPU OFF transition.
407 */
408 memcpy_toio(scratchpad_address +
409 scratchpad_contents.sdrc_block_offset +
410 sizeof(sdrc_block_contents), &arm_context_addr, 4);
411 }
412
omap3_control_save_context(void)413 void omap3_control_save_context(void)
414 {
415 control_context.sysconfig = omap_ctrl_readl(OMAP2_CONTROL_SYSCONFIG);
416 control_context.devconf0 = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
417 control_context.mem_dftrw0 =
418 omap_ctrl_readl(OMAP343X_CONTROL_MEM_DFTRW0);
419 control_context.mem_dftrw1 =
420 omap_ctrl_readl(OMAP343X_CONTROL_MEM_DFTRW1);
421 control_context.msuspendmux_0 =
422 omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_0);
423 control_context.msuspendmux_1 =
424 omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_1);
425 control_context.msuspendmux_2 =
426 omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_2);
427 control_context.msuspendmux_3 =
428 omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_3);
429 control_context.msuspendmux_4 =
430 omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_4);
431 control_context.msuspendmux_5 =
432 omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_5);
433 control_context.sec_ctrl = omap_ctrl_readl(OMAP2_CONTROL_SEC_CTRL);
434 control_context.devconf1 = omap_ctrl_readl(OMAP343X_CONTROL_DEVCONF1);
435 control_context.csirxfe = omap_ctrl_readl(OMAP343X_CONTROL_CSIRXFE);
436 control_context.iva2_bootaddr =
437 omap_ctrl_readl(OMAP343X_CONTROL_IVA2_BOOTADDR);
438 control_context.iva2_bootmod =
439 omap_ctrl_readl(OMAP343X_CONTROL_IVA2_BOOTMOD);
440 control_context.debobs_0 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(0));
441 control_context.debobs_1 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(1));
442 control_context.debobs_2 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(2));
443 control_context.debobs_3 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(3));
444 control_context.debobs_4 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(4));
445 control_context.debobs_5 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(5));
446 control_context.debobs_6 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(6));
447 control_context.debobs_7 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(7));
448 control_context.debobs_8 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(8));
449 control_context.prog_io0 = omap_ctrl_readl(OMAP343X_CONTROL_PROG_IO0);
450 control_context.prog_io1 = omap_ctrl_readl(OMAP343X_CONTROL_PROG_IO1);
451 control_context.dss_dpll_spreading =
452 omap_ctrl_readl(OMAP343X_CONTROL_DSS_DPLL_SPREADING);
453 control_context.core_dpll_spreading =
454 omap_ctrl_readl(OMAP343X_CONTROL_CORE_DPLL_SPREADING);
455 control_context.per_dpll_spreading =
456 omap_ctrl_readl(OMAP343X_CONTROL_PER_DPLL_SPREADING);
457 control_context.usbhost_dpll_spreading =
458 omap_ctrl_readl(OMAP343X_CONTROL_USBHOST_DPLL_SPREADING);
459 control_context.pbias_lite =
460 omap_ctrl_readl(OMAP343X_CONTROL_PBIAS_LITE);
461 control_context.temp_sensor =
462 omap_ctrl_readl(OMAP343X_CONTROL_TEMP_SENSOR);
463 control_context.sramldo4 = omap_ctrl_readl(OMAP343X_CONTROL_SRAMLDO4);
464 control_context.sramldo5 = omap_ctrl_readl(OMAP343X_CONTROL_SRAMLDO5);
465 control_context.csi = omap_ctrl_readl(OMAP343X_CONTROL_CSI);
466 control_context.padconf_sys_nirq =
467 omap_ctrl_readl(OMAP343X_CONTROL_PADCONF_SYSNIRQ);
468 }
469
omap3_control_restore_context(void)470 void omap3_control_restore_context(void)
471 {
472 omap_ctrl_writel(control_context.sysconfig, OMAP2_CONTROL_SYSCONFIG);
473 omap_ctrl_writel(control_context.devconf0, OMAP2_CONTROL_DEVCONF0);
474 omap_ctrl_writel(control_context.mem_dftrw0,
475 OMAP343X_CONTROL_MEM_DFTRW0);
476 omap_ctrl_writel(control_context.mem_dftrw1,
477 OMAP343X_CONTROL_MEM_DFTRW1);
478 omap_ctrl_writel(control_context.msuspendmux_0,
479 OMAP2_CONTROL_MSUSPENDMUX_0);
480 omap_ctrl_writel(control_context.msuspendmux_1,
481 OMAP2_CONTROL_MSUSPENDMUX_1);
482 omap_ctrl_writel(control_context.msuspendmux_2,
483 OMAP2_CONTROL_MSUSPENDMUX_2);
484 omap_ctrl_writel(control_context.msuspendmux_3,
485 OMAP2_CONTROL_MSUSPENDMUX_3);
486 omap_ctrl_writel(control_context.msuspendmux_4,
487 OMAP2_CONTROL_MSUSPENDMUX_4);
488 omap_ctrl_writel(control_context.msuspendmux_5,
489 OMAP2_CONTROL_MSUSPENDMUX_5);
490 omap_ctrl_writel(control_context.sec_ctrl, OMAP2_CONTROL_SEC_CTRL);
491 omap_ctrl_writel(control_context.devconf1, OMAP343X_CONTROL_DEVCONF1);
492 omap_ctrl_writel(control_context.csirxfe, OMAP343X_CONTROL_CSIRXFE);
493 omap_ctrl_writel(control_context.iva2_bootaddr,
494 OMAP343X_CONTROL_IVA2_BOOTADDR);
495 omap_ctrl_writel(control_context.iva2_bootmod,
496 OMAP343X_CONTROL_IVA2_BOOTMOD);
497 omap_ctrl_writel(control_context.debobs_0, OMAP343X_CONTROL_DEBOBS(0));
498 omap_ctrl_writel(control_context.debobs_1, OMAP343X_CONTROL_DEBOBS(1));
499 omap_ctrl_writel(control_context.debobs_2, OMAP343X_CONTROL_DEBOBS(2));
500 omap_ctrl_writel(control_context.debobs_3, OMAP343X_CONTROL_DEBOBS(3));
501 omap_ctrl_writel(control_context.debobs_4, OMAP343X_CONTROL_DEBOBS(4));
502 omap_ctrl_writel(control_context.debobs_5, OMAP343X_CONTROL_DEBOBS(5));
503 omap_ctrl_writel(control_context.debobs_6, OMAP343X_CONTROL_DEBOBS(6));
504 omap_ctrl_writel(control_context.debobs_7, OMAP343X_CONTROL_DEBOBS(7));
505 omap_ctrl_writel(control_context.debobs_8, OMAP343X_CONTROL_DEBOBS(8));
506 omap_ctrl_writel(control_context.prog_io0, OMAP343X_CONTROL_PROG_IO0);
507 omap_ctrl_writel(control_context.prog_io1, OMAP343X_CONTROL_PROG_IO1);
508 omap_ctrl_writel(control_context.dss_dpll_spreading,
509 OMAP343X_CONTROL_DSS_DPLL_SPREADING);
510 omap_ctrl_writel(control_context.core_dpll_spreading,
511 OMAP343X_CONTROL_CORE_DPLL_SPREADING);
512 omap_ctrl_writel(control_context.per_dpll_spreading,
513 OMAP343X_CONTROL_PER_DPLL_SPREADING);
514 omap_ctrl_writel(control_context.usbhost_dpll_spreading,
515 OMAP343X_CONTROL_USBHOST_DPLL_SPREADING);
516 omap_ctrl_writel(control_context.pbias_lite,
517 OMAP343X_CONTROL_PBIAS_LITE);
518 omap_ctrl_writel(control_context.temp_sensor,
519 OMAP343X_CONTROL_TEMP_SENSOR);
520 omap_ctrl_writel(control_context.sramldo4, OMAP343X_CONTROL_SRAMLDO4);
521 omap_ctrl_writel(control_context.sramldo5, OMAP343X_CONTROL_SRAMLDO5);
522 omap_ctrl_writel(control_context.csi, OMAP343X_CONTROL_CSI);
523 omap_ctrl_writel(control_context.padconf_sys_nirq,
524 OMAP343X_CONTROL_PADCONF_SYSNIRQ);
525 }
526
omap3630_ctrl_disable_rta(void)527 void omap3630_ctrl_disable_rta(void)
528 {
529 if (!cpu_is_omap3630())
530 return;
531 omap_ctrl_writel(OMAP36XX_RTA_DISABLE, OMAP36XX_CONTROL_MEM_RTA_CTRL);
532 }
533
534 /**
535 * omap3_ctrl_save_padconf - save padconf registers to scratchpad RAM
536 *
537 * Tell the SCM to start saving the padconf registers, then wait for
538 * the process to complete. Returns 0 unconditionally, although it
539 * should also eventually be able to return -ETIMEDOUT, if the save
540 * does not complete.
541 *
542 * XXX This function is missing a timeout. What should it be?
543 */
omap3_ctrl_save_padconf(void)544 int omap3_ctrl_save_padconf(void)
545 {
546 u32 cpo;
547
548 /* Save the padconf registers */
549 cpo = omap_ctrl_readl(OMAP343X_CONTROL_PADCONF_OFF);
550 cpo |= START_PADCONF_SAVE;
551 omap_ctrl_writel(cpo, OMAP343X_CONTROL_PADCONF_OFF);
552
553 /* wait for the save to complete */
554 while (!(omap_ctrl_readl(OMAP343X_CONTROL_GENERAL_PURPOSE_STATUS)
555 & PADCONF_SAVE_DONE))
556 udelay(1);
557
558 return 0;
559 }
560
561 /**
562 * omap3_ctrl_set_iva_bootmode_idle - sets the IVA2 bootmode to idle
563 *
564 * Sets the bootmode for IVA2 to idle. This is needed by the PM code to
565 * force disable IVA2 so that it does not prevent any low-power states.
566 */
omap3_ctrl_set_iva_bootmode_idle(void)567 static void __init omap3_ctrl_set_iva_bootmode_idle(void)
568 {
569 omap_ctrl_writel(OMAP3_IVA2_BOOTMOD_IDLE,
570 OMAP343X_CONTROL_IVA2_BOOTMOD);
571 }
572
573 /**
574 * omap3_ctrl_setup_d2d_padconf - setup stacked modem pads for idle
575 *
576 * Sets up the pads controlling the stacked modem in such way that the
577 * device can enter idle.
578 */
omap3_ctrl_setup_d2d_padconf(void)579 static void __init omap3_ctrl_setup_d2d_padconf(void)
580 {
581 u16 mask, padconf;
582
583 /*
584 * In a stand alone OMAP3430 where there is not a stacked
585 * modem for the D2D Idle Ack and D2D MStandby must be pulled
586 * high. S CONTROL_PADCONF_SAD2D_IDLEACK and
587 * CONTROL_PADCONF_SAD2D_MSTDBY to have a pull up.
588 */
589 mask = (1 << 4) | (1 << 3); /* pull-up, enabled */
590 padconf = omap_ctrl_readw(OMAP3_PADCONF_SAD2D_MSTANDBY);
591 padconf |= mask;
592 omap_ctrl_writew(padconf, OMAP3_PADCONF_SAD2D_MSTANDBY);
593
594 padconf = omap_ctrl_readw(OMAP3_PADCONF_SAD2D_IDLEACK);
595 padconf |= mask;
596 omap_ctrl_writew(padconf, OMAP3_PADCONF_SAD2D_IDLEACK);
597 }
598
599 /**
600 * omap3_ctrl_init - does static initializations for control module
601 *
602 * Initializes system control module. This sets up the sysconfig autoidle,
603 * and sets up modem and iva2 so that they can be idled properly.
604 */
omap3_ctrl_init(void)605 void __init omap3_ctrl_init(void)
606 {
607 omap_ctrl_writel(OMAP3430_AUTOIDLE_MASK, OMAP2_CONTROL_SYSCONFIG);
608
609 omap3_ctrl_set_iva_bootmode_idle();
610
611 omap3_ctrl_setup_d2d_padconf();
612 }
613 #endif /* CONFIG_ARCH_OMAP3 && CONFIG_PM */
614