1 /*
2 * Copyright (c) 2012 Intel Corporation. All rights reserved.
3 * Copyright (c) 2006 - 2012 QLogic Corporation. All rights reserved.
4 * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
5 *
6 * This software is available to you under a choice of one of two
7 * licenses. You may choose to be licensed under the terms of the GNU
8 * General Public License (GPL) Version 2, available from the file
9 * COPYING in the main directory of this source tree, or the
10 * OpenIB.org BSD license below:
11 *
12 * Redistribution and use in source and binary forms, with or
13 * without modification, are permitted provided that the following
14 * conditions are met:
15 *
16 * - Redistributions of source code must retain the above
17 * copyright notice, this list of conditions and the following
18 * disclaimer.
19 *
20 * - Redistributions in binary form must reproduce the above
21 * copyright notice, this list of conditions and the following
22 * disclaimer in the documentation and/or other materials
23 * provided with the distribution.
24 *
25 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
26 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
27 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
28 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
29 * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
30 * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
31 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
32 * SOFTWARE.
33 */
34
35 #include <linux/delay.h>
36 #include <linux/pci.h>
37 #include <linux/vmalloc.h>
38
39 #include "qib.h"
40
41 /*
42 * Functions specific to the serial EEPROM on cards handled by ib_qib.
43 * The actual serail interface code is in qib_twsi.c. This file is a client
44 */
45
46 /**
47 * qib_eeprom_read - receives bytes from the eeprom via I2C
48 * @dd: the qlogic_ib device
49 * @eeprom_offset: address to read from
50 * @buffer: where to store result
51 * @len: number of bytes to receive
52 */
qib_eeprom_read(struct qib_devdata * dd,u8 eeprom_offset,void * buff,int len)53 int qib_eeprom_read(struct qib_devdata *dd, u8 eeprom_offset,
54 void *buff, int len)
55 {
56 int ret;
57
58 ret = mutex_lock_interruptible(&dd->eep_lock);
59 if (!ret) {
60 ret = qib_twsi_reset(dd);
61 if (ret)
62 qib_dev_err(dd, "EEPROM Reset for read failed\n");
63 else
64 ret = qib_twsi_blk_rd(dd, dd->twsi_eeprom_dev,
65 eeprom_offset, buff, len);
66 mutex_unlock(&dd->eep_lock);
67 }
68
69 return ret;
70 }
71
72 /*
73 * Actually update the eeprom, first doing write enable if
74 * needed, then restoring write enable state.
75 * Must be called with eep_lock held
76 */
eeprom_write_with_enable(struct qib_devdata * dd,u8 offset,const void * buf,int len)77 static int eeprom_write_with_enable(struct qib_devdata *dd, u8 offset,
78 const void *buf, int len)
79 {
80 int ret, pwen;
81
82 pwen = dd->f_eeprom_wen(dd, 1);
83 ret = qib_twsi_reset(dd);
84 if (ret)
85 qib_dev_err(dd, "EEPROM Reset for write failed\n");
86 else
87 ret = qib_twsi_blk_wr(dd, dd->twsi_eeprom_dev,
88 offset, buf, len);
89 dd->f_eeprom_wen(dd, pwen);
90 return ret;
91 }
92
93 /**
94 * qib_eeprom_write - writes data to the eeprom via I2C
95 * @dd: the qlogic_ib device
96 * @eeprom_offset: where to place data
97 * @buffer: data to write
98 * @len: number of bytes to write
99 */
qib_eeprom_write(struct qib_devdata * dd,u8 eeprom_offset,const void * buff,int len)100 int qib_eeprom_write(struct qib_devdata *dd, u8 eeprom_offset,
101 const void *buff, int len)
102 {
103 int ret;
104
105 ret = mutex_lock_interruptible(&dd->eep_lock);
106 if (!ret) {
107 ret = eeprom_write_with_enable(dd, eeprom_offset, buff, len);
108 mutex_unlock(&dd->eep_lock);
109 }
110
111 return ret;
112 }
113
flash_csum(struct qib_flash * ifp,int adjust)114 static u8 flash_csum(struct qib_flash *ifp, int adjust)
115 {
116 u8 *ip = (u8 *) ifp;
117 u8 csum = 0, len;
118
119 /*
120 * Limit length checksummed to max length of actual data.
121 * Checksum of erased eeprom will still be bad, but we avoid
122 * reading past the end of the buffer we were passed.
123 */
124 len = ifp->if_length;
125 if (len > sizeof(struct qib_flash))
126 len = sizeof(struct qib_flash);
127 while (len--)
128 csum += *ip++;
129 csum -= ifp->if_csum;
130 csum = ~csum;
131 if (adjust)
132 ifp->if_csum = csum;
133
134 return csum;
135 }
136
137 /**
138 * qib_get_eeprom_info- get the GUID et al. from the TSWI EEPROM device
139 * @dd: the qlogic_ib device
140 *
141 * We have the capability to use the nguid field, and get
142 * the guid from the first chip's flash, to use for all of them.
143 */
qib_get_eeprom_info(struct qib_devdata * dd)144 void qib_get_eeprom_info(struct qib_devdata *dd)
145 {
146 void *buf;
147 struct qib_flash *ifp;
148 __be64 guid;
149 int len, eep_stat;
150 u8 csum, *bguid;
151 int t = dd->unit;
152 struct qib_devdata *dd0 = qib_lookup(0);
153
154 if (t && dd0->nguid > 1 && t <= dd0->nguid) {
155 u8 oguid;
156 dd->base_guid = dd0->base_guid;
157 bguid = (u8 *) &dd->base_guid;
158
159 oguid = bguid[7];
160 bguid[7] += t;
161 if (oguid > bguid[7]) {
162 if (bguid[6] == 0xff) {
163 if (bguid[5] == 0xff) {
164 qib_dev_err(dd,
165 "Can't set %s GUID from base, wraps to OUI!\n",
166 qib_get_unit_name(t));
167 dd->base_guid = 0;
168 goto bail;
169 }
170 bguid[5]++;
171 }
172 bguid[6]++;
173 }
174 dd->nguid = 1;
175 goto bail;
176 }
177
178 /*
179 * Read full flash, not just currently used part, since it may have
180 * been written with a newer definition.
181 * */
182 len = sizeof(struct qib_flash);
183 buf = vmalloc(len);
184 if (!buf) {
185 qib_dev_err(dd,
186 "Couldn't allocate memory to read %u bytes from eeprom for GUID\n",
187 len);
188 goto bail;
189 }
190
191 /*
192 * Use "public" eeprom read function, which does locking and
193 * figures out device. This will migrate to chip-specific.
194 */
195 eep_stat = qib_eeprom_read(dd, 0, buf, len);
196
197 if (eep_stat) {
198 qib_dev_err(dd, "Failed reading GUID from eeprom\n");
199 goto done;
200 }
201 ifp = (struct qib_flash *)buf;
202
203 csum = flash_csum(ifp, 0);
204 if (csum != ifp->if_csum) {
205 qib_devinfo(dd->pcidev,
206 "Bad I2C flash checksum: 0x%x, not 0x%x\n",
207 csum, ifp->if_csum);
208 goto done;
209 }
210 if (*(__be64 *) ifp->if_guid == cpu_to_be64(0) ||
211 *(__be64 *) ifp->if_guid == ~cpu_to_be64(0)) {
212 qib_dev_err(dd,
213 "Invalid GUID %llx from flash; ignoring\n",
214 *(unsigned long long *) ifp->if_guid);
215 /* don't allow GUID if all 0 or all 1's */
216 goto done;
217 }
218
219 /* complain, but allow it */
220 if (*(u64 *) ifp->if_guid == 0x100007511000000ULL)
221 qib_devinfo(dd->pcidev,
222 "Warning, GUID %llx is default, probably not correct!\n",
223 *(unsigned long long *) ifp->if_guid);
224
225 bguid = ifp->if_guid;
226 if (!bguid[0] && !bguid[1] && !bguid[2]) {
227 /*
228 * Original incorrect GUID format in flash; fix in
229 * core copy, by shifting up 2 octets; don't need to
230 * change top octet, since both it and shifted are 0.
231 */
232 bguid[1] = bguid[3];
233 bguid[2] = bguid[4];
234 bguid[3] = 0;
235 bguid[4] = 0;
236 guid = *(__be64 *) ifp->if_guid;
237 } else
238 guid = *(__be64 *) ifp->if_guid;
239 dd->base_guid = guid;
240 dd->nguid = ifp->if_numguid;
241 /*
242 * Things are slightly complicated by the desire to transparently
243 * support both the Pathscale 10-digit serial number and the QLogic
244 * 13-character version.
245 */
246 if ((ifp->if_fversion > 1) && ifp->if_sprefix[0] &&
247 ((u8 *) ifp->if_sprefix)[0] != 0xFF) {
248 char *snp = dd->serial;
249
250 /*
251 * This board has a Serial-prefix, which is stored
252 * elsewhere for backward-compatibility.
253 */
254 memcpy(snp, ifp->if_sprefix, sizeof ifp->if_sprefix);
255 snp[sizeof ifp->if_sprefix] = '\0';
256 len = strlen(snp);
257 snp += len;
258 len = (sizeof dd->serial) - len;
259 if (len > sizeof ifp->if_serial)
260 len = sizeof ifp->if_serial;
261 memcpy(snp, ifp->if_serial, len);
262 } else
263 memcpy(dd->serial, ifp->if_serial,
264 sizeof ifp->if_serial);
265 if (!strstr(ifp->if_comment, "Tested successfully"))
266 qib_dev_err(dd,
267 "Board SN %s did not pass functional test: %s\n",
268 dd->serial, ifp->if_comment);
269
270 done:
271 vfree(buf);
272
273 bail:;
274 }
275
276