1 #ifndef STICORE_H 2 #define STICORE_H 3 4 /* generic STI structures & functions */ 5 6 #if 0 7 #define DPRINTK(x) printk x 8 #else 9 #define DPRINTK(x) 10 #endif 11 12 #define MAX_STI_ROMS 4 /* max no. of ROMs which this driver handles */ 13 14 #define STI_REGION_MAX 8 /* hardcoded STI constants */ 15 #define STI_DEV_NAME_LENGTH 32 16 #define STI_MONITOR_MAX 256 17 18 #define STI_FONT_HPROMAN8 1 19 #define STI_FONT_KANA8 2 20 21 #define ALT_CODE_TYPE_UNKNOWN 0x00 /* alt code type values */ 22 #define ALT_CODE_TYPE_PA_RISC_64 0x01 23 24 /* The latency of the STI functions cannot really be reduced by setting 25 * this to 0; STI doesn't seem to be designed to allow calling a different 26 * function (or the same function with different arguments) after a 27 * function exited with 1 as return value. 28 * 29 * As all of the functions below could be called from interrupt context, 30 * we have to spin_lock_irqsave around the do { ret = bla(); } while(ret==1) 31 * block. Really bad latency there. 32 * 33 * Probably the best solution to all this is have the generic code manage 34 * the screen buffer and a kernel thread to call STI occasionally. 35 * 36 * Luckily, the frame buffer guys have the same problem so we can just wait 37 * for them to fix it and steal their solution. prumpf 38 */ 39 40 #include <asm/io.h> 41 42 #define STI_WAIT 1 43 44 #define STI_PTR(p) ( virt_to_phys(p) ) 45 #define PTR_STI(p) ( phys_to_virt((unsigned long)p) ) 46 47 #define sti_onscreen_x(sti) (sti->glob_cfg->onscreen_x) 48 #define sti_onscreen_y(sti) (sti->glob_cfg->onscreen_y) 49 50 /* sti_font_xy() use the native font ROM ! */ 51 #define sti_font_x(sti) (PTR_STI(sti->font)->width) 52 #define sti_font_y(sti) (PTR_STI(sti->font)->height) 53 54 #ifdef CONFIG_64BIT 55 #define STI_LOWMEM (GFP_KERNEL | GFP_DMA) 56 #else 57 #define STI_LOWMEM (GFP_KERNEL) 58 #endif 59 60 61 /* STI function configuration structs */ 62 63 typedef union region { 64 struct { 65 u32 offset : 14; /* offset in 4kbyte page */ 66 u32 sys_only : 1; /* don't map to user space */ 67 u32 cache : 1; /* map to data cache */ 68 u32 btlb : 1; /* map to block tlb */ 69 u32 last : 1; /* last region in list */ 70 u32 length : 14; /* length in 4kbyte page */ 71 } region_desc; 72 73 u32 region; /* complete region value */ 74 } region_t; 75 76 #define REGION_OFFSET_TO_PHYS( rt, hpa ) \ 77 (((rt).region_desc.offset << 12) + (hpa)) 78 79 struct sti_glob_cfg_ext { 80 u8 curr_mon; /* current monitor configured */ 81 u8 friendly_boot; /* in friendly boot mode */ 82 s16 power; /* power calculation (in Watts) */ 83 s32 freq_ref; /* frequency reference */ 84 u32 sti_mem_addr; /* pointer to global sti memory (size=sti_mem_request) */ 85 u32 future_ptr; /* pointer to future data */ 86 }; 87 88 struct sti_glob_cfg { 89 s32 text_planes; /* number of planes used for text */ 90 s16 onscreen_x; /* screen width in pixels */ 91 s16 onscreen_y; /* screen height in pixels */ 92 s16 offscreen_x; /* offset width in pixels */ 93 s16 offscreen_y; /* offset height in pixels */ 94 s16 total_x; /* frame buffer width in pixels */ 95 s16 total_y; /* frame buffer height in pixels */ 96 u32 region_ptrs[STI_REGION_MAX]; /* region pointers */ 97 s32 reent_lvl; /* storage for reentry level value */ 98 u32 save_addr; /* where to save or restore reentrant state */ 99 u32 ext_ptr; /* pointer to extended glob_cfg data structure */ 100 }; 101 102 103 /* STI init function structs */ 104 105 struct sti_init_flags { 106 u32 wait : 1; /* should routine idle wait or not */ 107 u32 reset : 1; /* hard reset the device? */ 108 u32 text : 1; /* turn on text display planes? */ 109 u32 nontext : 1; /* turn on non-text display planes? */ 110 u32 clear : 1; /* clear text display planes? */ 111 u32 cmap_blk : 1; /* non-text planes cmap black? */ 112 u32 enable_be_timer : 1; /* enable bus error timer */ 113 u32 enable_be_int : 1; /* enable bus error timer interrupt */ 114 u32 no_chg_tx : 1; /* don't change text settings */ 115 u32 no_chg_ntx : 1; /* don't change non-text settings */ 116 u32 no_chg_bet : 1; /* don't change berr timer settings */ 117 u32 no_chg_bei : 1; /* don't change berr int settings */ 118 u32 init_cmap_tx : 1; /* initialize cmap for text planes */ 119 u32 cmt_chg : 1; /* change current monitor type */ 120 u32 retain_ie : 1; /* don't allow reset to clear int enables */ 121 u32 caller_bootrom : 1; /* set only by bootrom for each call */ 122 u32 caller_kernel : 1; /* set only by kernel for each call */ 123 u32 caller_other : 1; /* set only by non-[BR/K] caller */ 124 u32 pad : 14; /* pad to word boundary */ 125 u32 future_ptr; /* pointer to future data */ 126 }; 127 128 struct sti_init_inptr_ext { 129 u8 config_mon_type; /* configure to monitor type */ 130 u8 pad[1]; /* pad to word boundary */ 131 u16 inflight_data; /* inflight data possible on PCI */ 132 u32 future_ptr; /* pointer to future data */ 133 }; 134 135 struct sti_init_inptr { 136 s32 text_planes; /* number of planes to use for text */ 137 u32 ext_ptr; /* pointer to extended init_graph inptr data structure*/ 138 }; 139 140 141 struct sti_init_outptr { 142 s32 errno; /* error number on failure */ 143 s32 text_planes; /* number of planes used for text */ 144 u32 future_ptr; /* pointer to future data */ 145 }; 146 147 148 149 /* STI configuration function structs */ 150 151 struct sti_conf_flags { 152 u32 wait : 1; /* should routine idle wait or not */ 153 u32 pad : 31; /* pad to word boundary */ 154 u32 future_ptr; /* pointer to future data */ 155 }; 156 157 struct sti_conf_inptr { 158 u32 future_ptr; /* pointer to future data */ 159 }; 160 161 struct sti_conf_outptr_ext { 162 u32 crt_config[3]; /* hardware specific X11/OGL information */ 163 u32 crt_hdw[3]; 164 u32 future_ptr; 165 }; 166 167 struct sti_conf_outptr { 168 s32 errno; /* error number on failure */ 169 s16 onscreen_x; /* screen width in pixels */ 170 s16 onscreen_y; /* screen height in pixels */ 171 s16 offscreen_x; /* offscreen width in pixels */ 172 s16 offscreen_y; /* offscreen height in pixels */ 173 s16 total_x; /* frame buffer width in pixels */ 174 s16 total_y; /* frame buffer height in pixels */ 175 s32 bits_per_pixel; /* bits/pixel device has configured */ 176 s32 bits_used; /* bits which can be accessed */ 177 s32 planes; /* number of fb planes in system */ 178 u8 dev_name[STI_DEV_NAME_LENGTH]; /* null terminated product name */ 179 u32 attributes; /* flags denoting attributes */ 180 u32 ext_ptr; /* pointer to future data */ 181 }; 182 183 struct sti_rom { 184 u8 type[4]; 185 u8 res004; 186 u8 num_mons; 187 u8 revno[2]; 188 u32 graphics_id[2]; 189 190 u32 font_start; 191 u32 statesize; 192 u32 last_addr; 193 u32 region_list; 194 195 u16 reentsize; 196 u16 maxtime; 197 u32 mon_tbl_addr; 198 u32 user_data_addr; 199 u32 sti_mem_req; 200 201 u32 user_data_size; 202 u16 power; 203 u8 bus_support; 204 u8 ext_bus_support; 205 u8 alt_code_type; 206 u8 ext_dd_struct[3]; 207 u32 cfb_addr; 208 209 u32 init_graph; 210 u32 state_mgmt; 211 u32 font_unpmv; 212 u32 block_move; 213 u32 self_test; 214 u32 excep_hdlr; 215 u32 inq_conf; 216 u32 set_cm_entry; 217 u32 dma_ctrl; 218 u8 res040[7 * 4]; 219 220 u32 init_graph_addr; 221 u32 state_mgmt_addr; 222 u32 font_unp_addr; 223 u32 block_move_addr; 224 u32 self_test_addr; 225 u32 excep_hdlr_addr; 226 u32 inq_conf_addr; 227 u32 set_cm_entry_addr; 228 u32 image_unpack_addr; 229 u32 pa_risx_addrs[7]; 230 }; 231 232 struct sti_rom_font { 233 u16 first_char; 234 u16 last_char; 235 u8 width; 236 u8 height; 237 u8 font_type; /* language type */ 238 u8 bytes_per_char; 239 u32 next_font; 240 u8 underline_height; 241 u8 underline_pos; 242 u8 res008[2]; 243 }; 244 245 /* sticore internal font handling */ 246 247 struct sti_cooked_font { 248 struct sti_rom_font *raw; 249 struct sti_cooked_font *next_font; 250 }; 251 252 struct sti_cooked_rom { 253 struct sti_rom *raw; 254 struct sti_cooked_font *font_start; 255 }; 256 257 /* STI font printing function structs */ 258 259 struct sti_font_inptr { 260 u32 font_start_addr; /* address of font start */ 261 s16 index; /* index into font table of character */ 262 u8 fg_color; /* foreground color of character */ 263 u8 bg_color; /* background color of character */ 264 s16 dest_x; /* X location of character upper left */ 265 s16 dest_y; /* Y location of character upper left */ 266 u32 future_ptr; /* pointer to future data */ 267 }; 268 269 struct sti_font_flags { 270 u32 wait : 1; /* should routine idle wait or not */ 271 u32 non_text : 1; /* font unpack/move in non_text planes =1, text =0 */ 272 u32 pad : 30; /* pad to word boundary */ 273 u32 future_ptr; /* pointer to future data */ 274 }; 275 276 struct sti_font_outptr { 277 s32 errno; /* error number on failure */ 278 u32 future_ptr; /* pointer to future data */ 279 }; 280 281 /* STI blockmove structs */ 282 283 struct sti_blkmv_flags { 284 u32 wait : 1; /* should routine idle wait or not */ 285 u32 color : 1; /* change color during move? */ 286 u32 clear : 1; /* clear during move? */ 287 u32 non_text : 1; /* block move in non_text planes =1, text =0 */ 288 u32 pad : 28; /* pad to word boundary */ 289 u32 future_ptr; /* pointer to future data */ 290 }; 291 292 struct sti_blkmv_inptr { 293 u8 fg_color; /* foreground color after move */ 294 u8 bg_color; /* background color after move */ 295 s16 src_x; /* source upper left pixel x location */ 296 s16 src_y; /* source upper left pixel y location */ 297 s16 dest_x; /* dest upper left pixel x location */ 298 s16 dest_y; /* dest upper left pixel y location */ 299 s16 width; /* block width in pixels */ 300 s16 height; /* block height in pixels */ 301 u32 future_ptr; /* pointer to future data */ 302 }; 303 304 struct sti_blkmv_outptr { 305 s32 errno; /* error number on failure */ 306 u32 future_ptr; /* pointer to future data */ 307 }; 308 309 310 /* sti_all_data is an internal struct which needs to be allocated in 311 * low memory (< 4GB) if STI is used with 32bit STI on a 64bit kernel */ 312 313 struct sti_all_data { 314 struct sti_glob_cfg glob_cfg; 315 struct sti_glob_cfg_ext glob_cfg_ext; 316 317 struct sti_conf_inptr inq_inptr; 318 struct sti_conf_outptr inq_outptr; /* configuration */ 319 struct sti_conf_outptr_ext inq_outptr_ext; 320 321 struct sti_init_inptr_ext init_inptr_ext; 322 struct sti_init_inptr init_inptr; 323 struct sti_init_outptr init_outptr; 324 325 struct sti_blkmv_inptr blkmv_inptr; 326 struct sti_blkmv_outptr blkmv_outptr; 327 328 struct sti_font_inptr font_inptr; 329 struct sti_font_outptr font_outptr; 330 331 /* leave as last entries */ 332 unsigned long save_addr[1024 / sizeof(unsigned long)]; 333 /* min 256 bytes which is STI default, max sti->sti_mem_request */ 334 unsigned long sti_mem_addr[256 / sizeof(unsigned long)]; 335 /* do not add something below here ! */ 336 }; 337 338 /* internal generic STI struct */ 339 340 struct sti_struct { 341 spinlock_t lock; 342 343 /* the following fields needs to be filled in by the word/byte routines */ 344 int font_width; 345 int font_height; 346 /* char **mon_strings; */ 347 int sti_mem_request; 348 u32 graphics_id[2]; 349 350 struct sti_cooked_rom *rom; 351 352 unsigned long font_unpmv; 353 unsigned long block_move; 354 unsigned long init_graph; 355 unsigned long inq_conf; 356 357 /* all following fields are initialized by the generic routines */ 358 int text_planes; 359 region_t regions[STI_REGION_MAX]; 360 unsigned long regions_phys[STI_REGION_MAX]; 361 362 struct sti_glob_cfg *glob_cfg; /* points into sti_all_data */ 363 364 struct sti_cooked_font *font; /* ptr to selected font (cooked) */ 365 366 struct pci_dev *pd; 367 368 /* PCI data structures (pg. 17ff from sti.pdf) */ 369 u8 rm_entry[16]; /* pci region mapper array == pci config space offset */ 370 371 /* pointer to the fb_info where this STI device is used */ 372 struct fb_info *info; 373 374 /* pointer to all internal data */ 375 struct sti_all_data *sti_data; 376 }; 377 378 379 /* sticore interface functions */ 380 381 struct sti_struct *sti_get_rom(unsigned int index); /* 0: default sti */ 382 383 384 /* sticore main function to call STI firmware */ 385 386 int sti_call(const struct sti_struct *sti, unsigned long func, 387 const void *flags, void *inptr, void *outptr, 388 struct sti_glob_cfg *glob_cfg); 389 390 391 /* functions to call the STI ROM directly */ 392 393 void sti_putc(struct sti_struct *sti, int c, int y, int x); 394 void sti_set(struct sti_struct *sti, int src_y, int src_x, 395 int height, int width, u8 color); 396 void sti_clear(struct sti_struct *sti, int src_y, int src_x, 397 int height, int width, int c); 398 void sti_bmove(struct sti_struct *sti, int src_y, int src_x, 399 int dst_y, int dst_x, int height, int width); 400 401 #endif /* STICORE_H */ 402