1 /*
2 * This file is provided under a dual BSD/GPLv2 license. When using or
3 * redistributing this file, you may do so under either license.
4 *
5 * GPL LICENSE SUMMARY
6 *
7 * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of version 2 of the GNU General Public License as
11 * published by the Free Software Foundation.
12 *
13 * This program is distributed in the hope that it will be useful, but
14 * WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
16 * General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
21 * The full GNU General Public License is included in this distribution
22 * in the file called LICENSE.GPL.
23 *
24 * BSD LICENSE
25 *
26 * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
27 * All rights reserved.
28 *
29 * Redistribution and use in source and binary forms, with or without
30 * modification, are permitted provided that the following conditions
31 * are met:
32 *
33 * * Redistributions of source code must retain the above copyright
34 * notice, this list of conditions and the following disclaimer.
35 * * Redistributions in binary form must reproduce the above copyright
36 * notice, this list of conditions and the following disclaimer in
37 * the documentation and/or other materials provided with the
38 * distribution.
39 * * Neither the name of Intel Corporation nor the names of its
40 * contributors may be used to endorse or promote products derived
41 * from this software without specific prior written permission.
42 *
43 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
44 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
45 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
46 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
47 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
48 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
49 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
50 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
51 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
52 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
53 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
54 */
55 #ifndef _SCI_HOST_H_
56 #define _SCI_HOST_H_
57
58 #include <scsi/sas_ata.h>
59 #include "remote_device.h"
60 #include "phy.h"
61 #include "isci.h"
62 #include "remote_node_table.h"
63 #include "registers.h"
64 #include "unsolicited_frame_control.h"
65 #include "probe_roms.h"
66
67 struct isci_request;
68 struct scu_task_context;
69
70
71 /**
72 * struct sci_power_control -
73 *
74 * This structure defines the fields for managing power control for direct
75 * attached disk devices.
76 */
77 struct sci_power_control {
78 /**
79 * This field is set when the power control timer is running and cleared when
80 * it is not.
81 */
82 bool timer_started;
83
84 /**
85 * Timer to control when the directed attached disks can consume power.
86 */
87 struct sci_timer timer;
88
89 /**
90 * This field is used to keep track of how many phys are put into the
91 * requesters field.
92 */
93 u8 phys_waiting;
94
95 /**
96 * This field is used to keep track of how many phys have been granted to consume power
97 */
98 u8 phys_granted_power;
99
100 /**
101 * This field is an array of phys that we are waiting on. The phys are direct
102 * mapped into requesters via struct sci_phy.phy_index
103 */
104 struct isci_phy *requesters[SCI_MAX_PHYS];
105
106 };
107
108 struct sci_port_configuration_agent;
109 typedef void (*port_config_fn)(struct isci_host *,
110 struct sci_port_configuration_agent *,
111 struct isci_port *, struct isci_phy *);
112 bool is_port_config_apc(struct isci_host *ihost);
113 bool is_controller_start_complete(struct isci_host *ihost);
114
115 struct sci_port_configuration_agent {
116 u16 phy_configured_mask;
117 u16 phy_ready_mask;
118 struct {
119 u8 min_index;
120 u8 max_index;
121 } phy_valid_port_range[SCI_MAX_PHYS];
122 bool timer_pending;
123 port_config_fn link_up_handler;
124 port_config_fn link_down_handler;
125 struct sci_timer timer;
126 };
127
128 /**
129 * isci_host - primary host/controller object
130 * @timer: timeout start/stop operations
131 * @device_table: rni (hw remote node index) to remote device lookup table
132 * @available_remote_nodes: rni allocator
133 * @power_control: manage device spin up
134 * @io_request_sequence: generation number for tci's (task contexts)
135 * @task_context_table: hw task context table
136 * @remote_node_context_table: hw remote node context table
137 * @completion_queue: hw-producer driver-consumer communication ring
138 * @completion_queue_get: tracks the driver 'head' of the ring to notify hw
139 * @logical_port_entries: min({driver|silicon}-supported-port-count)
140 * @remote_node_entries: min({driver|silicon}-supported-node-count)
141 * @task_context_entries: min({driver|silicon}-supported-task-count)
142 * @phy_timer: phy startup timer
143 * @invalid_phy_mask: if an invalid_link_up notification is reported a bit for
144 * the phy index is set so further notifications are not
145 * made. Once the phy reports link up and is made part of a
146 * port then this bit is cleared.
147
148 */
149 struct isci_host {
150 struct sci_base_state_machine sm;
151 /* XXX can we time this externally */
152 struct sci_timer timer;
153 /* XXX drop reference module params directly */
154 struct sci_user_parameters user_parameters;
155 /* XXX no need to be a union */
156 struct sci_oem_params oem_parameters;
157 struct sci_port_configuration_agent port_agent;
158 struct isci_remote_device *device_table[SCI_MAX_REMOTE_DEVICES];
159 struct sci_remote_node_table available_remote_nodes;
160 struct sci_power_control power_control;
161 u8 io_request_sequence[SCI_MAX_IO_REQUESTS];
162 struct scu_task_context *task_context_table;
163 dma_addr_t tc_dma;
164 union scu_remote_node_context *remote_node_context_table;
165 dma_addr_t rnc_dma;
166 u32 *completion_queue;
167 dma_addr_t cq_dma;
168 u32 completion_queue_get;
169 u32 logical_port_entries;
170 u32 remote_node_entries;
171 u32 task_context_entries;
172 void *ufi_buf;
173 dma_addr_t ufi_dma;
174 struct sci_unsolicited_frame_control uf_control;
175
176 /* phy startup */
177 struct sci_timer phy_timer;
178 /* XXX kill */
179 bool phy_startup_timer_pending;
180 u32 next_phy_to_start;
181 /* XXX convert to unsigned long and use bitops */
182 u8 invalid_phy_mask;
183
184 /* TODO attempt dynamic interrupt coalescing scheme */
185 u16 interrupt_coalesce_number;
186 u32 interrupt_coalesce_timeout;
187 struct smu_registers __iomem *smu_registers;
188 struct scu_registers __iomem *scu_registers;
189
190 u16 tci_head;
191 u16 tci_tail;
192 u16 tci_pool[SCI_MAX_IO_REQUESTS];
193
194 int id; /* unique within a given pci device */
195 struct isci_phy phys[SCI_MAX_PHYS];
196 struct isci_port ports[SCI_MAX_PORTS + 1]; /* includes dummy port */
197 struct asd_sas_port sas_ports[SCI_MAX_PORTS];
198 struct sas_ha_struct sas_ha;
199
200 struct pci_dev *pdev;
201 #define IHOST_START_PENDING 0
202 #define IHOST_STOP_PENDING 1
203 #define IHOST_IRQ_ENABLED 2
204 unsigned long flags;
205 wait_queue_head_t eventq;
206 struct tasklet_struct completion_tasklet;
207 spinlock_t scic_lock;
208 struct isci_request *reqs[SCI_MAX_IO_REQUESTS];
209 struct isci_remote_device devices[SCI_MAX_REMOTE_DEVICES];
210 };
211
212 /**
213 * enum sci_controller_states - This enumeration depicts all the states
214 * for the common controller state machine.
215 */
216 enum sci_controller_states {
217 /**
218 * Simply the initial state for the base controller state machine.
219 */
220 SCIC_INITIAL = 0,
221
222 /**
223 * This state indicates that the controller is reset. The memory for
224 * the controller is in it's initial state, but the controller requires
225 * initialization.
226 * This state is entered from the INITIAL state.
227 * This state is entered from the RESETTING state.
228 */
229 SCIC_RESET,
230
231 /**
232 * This state is typically an action state that indicates the controller
233 * is in the process of initialization. In this state no new IO operations
234 * are permitted.
235 * This state is entered from the RESET state.
236 */
237 SCIC_INITIALIZING,
238
239 /**
240 * This state indicates that the controller has been successfully
241 * initialized. In this state no new IO operations are permitted.
242 * This state is entered from the INITIALIZING state.
243 */
244 SCIC_INITIALIZED,
245
246 /**
247 * This state indicates the the controller is in the process of becoming
248 * ready (i.e. starting). In this state no new IO operations are permitted.
249 * This state is entered from the INITIALIZED state.
250 */
251 SCIC_STARTING,
252
253 /**
254 * This state indicates the controller is now ready. Thus, the user
255 * is able to perform IO operations on the controller.
256 * This state is entered from the STARTING state.
257 */
258 SCIC_READY,
259
260 /**
261 * This state is typically an action state that indicates the controller
262 * is in the process of resetting. Thus, the user is unable to perform
263 * IO operations on the controller. A reset is considered destructive in
264 * most cases.
265 * This state is entered from the READY state.
266 * This state is entered from the FAILED state.
267 * This state is entered from the STOPPED state.
268 */
269 SCIC_RESETTING,
270
271 /**
272 * This state indicates that the controller is in the process of stopping.
273 * In this state no new IO operations are permitted, but existing IO
274 * operations are allowed to complete.
275 * This state is entered from the READY state.
276 */
277 SCIC_STOPPING,
278
279 /**
280 * This state indicates that the controller could not successfully be
281 * initialized. In this state no new IO operations are permitted.
282 * This state is entered from the INITIALIZING state.
283 * This state is entered from the STARTING state.
284 * This state is entered from the STOPPING state.
285 * This state is entered from the RESETTING state.
286 */
287 SCIC_FAILED,
288 };
289
290 /**
291 * struct isci_pci_info - This class represents the pci function containing the
292 * controllers. Depending on PCI SKU, there could be up to 2 controllers in
293 * the PCI function.
294 */
295 #define SCI_MAX_MSIX_INT (SCI_NUM_MSI_X_INT*SCI_MAX_CONTROLLERS)
296
297 struct isci_pci_info {
298 struct msix_entry msix_entries[SCI_MAX_MSIX_INT];
299 struct isci_host *hosts[SCI_MAX_CONTROLLERS];
300 struct isci_orom *orom;
301 };
302
to_pci_info(struct pci_dev * pdev)303 static inline struct isci_pci_info *to_pci_info(struct pci_dev *pdev)
304 {
305 return pci_get_drvdata(pdev);
306 }
307
to_shost(struct isci_host * ihost)308 static inline struct Scsi_Host *to_shost(struct isci_host *ihost)
309 {
310 return ihost->sas_ha.core.shost;
311 }
312
313 #define for_each_isci_host(id, ihost, pdev) \
314 for (id = 0; id < SCI_MAX_CONTROLLERS && \
315 (ihost = to_pci_info(pdev)->hosts[id]); id++)
316
wait_for_start(struct isci_host * ihost)317 static inline void wait_for_start(struct isci_host *ihost)
318 {
319 wait_event(ihost->eventq, !test_bit(IHOST_START_PENDING, &ihost->flags));
320 }
321
wait_for_stop(struct isci_host * ihost)322 static inline void wait_for_stop(struct isci_host *ihost)
323 {
324 wait_event(ihost->eventq, !test_bit(IHOST_STOP_PENDING, &ihost->flags));
325 }
326
wait_for_device_start(struct isci_host * ihost,struct isci_remote_device * idev)327 static inline void wait_for_device_start(struct isci_host *ihost, struct isci_remote_device *idev)
328 {
329 wait_event(ihost->eventq, !test_bit(IDEV_START_PENDING, &idev->flags));
330 }
331
wait_for_device_stop(struct isci_host * ihost,struct isci_remote_device * idev)332 static inline void wait_for_device_stop(struct isci_host *ihost, struct isci_remote_device *idev)
333 {
334 wait_event(ihost->eventq, !test_bit(IDEV_STOP_PENDING, &idev->flags));
335 }
336
dev_to_ihost(struct domain_device * dev)337 static inline struct isci_host *dev_to_ihost(struct domain_device *dev)
338 {
339 return dev->port->ha->lldd_ha;
340 }
341
idev_to_ihost(struct isci_remote_device * idev)342 static inline struct isci_host *idev_to_ihost(struct isci_remote_device *idev)
343 {
344 return dev_to_ihost(idev->domain_dev);
345 }
346
347 /* we always use protocol engine group zero */
348 #define ISCI_PEG 0
349
350 /* see sci_controller_io_tag_allocate|free for how seq and tci are built */
351 #define ISCI_TAG(seq, tci) (((u16) (seq)) << 12 | tci)
352
353 /* these are returned by the hardware, so sanitize them */
354 #define ISCI_TAG_SEQ(tag) (((tag) >> 12) & (SCI_MAX_SEQ-1))
355 #define ISCI_TAG_TCI(tag) ((tag) & (SCI_MAX_IO_REQUESTS-1))
356
357 /* interrupt coalescing baseline: 9 == 3 to 5us interrupt delay per command */
358 #define ISCI_COALESCE_BASE 9
359
360 /* expander attached sata devices require 3 rnc slots */
sci_remote_device_node_count(struct isci_remote_device * idev)361 static inline int sci_remote_device_node_count(struct isci_remote_device *idev)
362 {
363 struct domain_device *dev = idev->domain_dev;
364
365 if (dev_is_sata(dev) && dev->parent)
366 return SCU_STP_REMOTE_NODE_COUNT;
367 return SCU_SSP_REMOTE_NODE_COUNT;
368 }
369
370 /**
371 * sci_controller_clear_invalid_phy() -
372 *
373 * This macro will clear the bit in the invalid phy mask for this controller
374 * object. This is used to control messages reported for invalid link up
375 * notifications.
376 */
377 #define sci_controller_clear_invalid_phy(controller, phy) \
378 ((controller)->invalid_phy_mask &= ~(1 << (phy)->phy_index))
379
scirdev_to_dev(struct isci_remote_device * idev)380 static inline struct device *scirdev_to_dev(struct isci_remote_device *idev)
381 {
382 if (!idev || !idev->isci_port || !idev->isci_port->isci_host)
383 return NULL;
384
385 return &idev->isci_port->isci_host->pdev->dev;
386 }
387
is_a2(struct pci_dev * pdev)388 static inline bool is_a2(struct pci_dev *pdev)
389 {
390 if (pdev->revision < 4)
391 return true;
392 return false;
393 }
394
is_b0(struct pci_dev * pdev)395 static inline bool is_b0(struct pci_dev *pdev)
396 {
397 if (pdev->revision == 4)
398 return true;
399 return false;
400 }
401
is_c0(struct pci_dev * pdev)402 static inline bool is_c0(struct pci_dev *pdev)
403 {
404 if (pdev->revision == 5)
405 return true;
406 return false;
407 }
408
is_c1(struct pci_dev * pdev)409 static inline bool is_c1(struct pci_dev *pdev)
410 {
411 if (pdev->revision >= 6)
412 return true;
413 return false;
414 }
415
416 enum cable_selections {
417 short_cable = 0,
418 long_cable = 1,
419 medium_cable = 2,
420 undefined_cable = 3
421 };
422
423 #define CABLE_OVERRIDE_DISABLED (0x10000)
424
is_cable_select_overridden(void)425 static inline int is_cable_select_overridden(void)
426 {
427 return cable_selection_override < CABLE_OVERRIDE_DISABLED;
428 }
429
430 enum cable_selections decode_cable_selection(struct isci_host *ihost, int phy);
431 void validate_cable_selections(struct isci_host *ihost);
432 char *lookup_cable_names(enum cable_selections);
433
434 /* set hw control for 'activity', even though active enclosures seem to drive
435 * the activity led on their own. Skip setting FSENG control on 'status' due
436 * to unexpected operation and 'error' due to not being a supported automatic
437 * FSENG output
438 */
439 #define SGPIO_HW_CONTROL 0x00000443
440
isci_gpio_count(struct isci_host * ihost)441 static inline int isci_gpio_count(struct isci_host *ihost)
442 {
443 return ARRAY_SIZE(ihost->scu_registers->peg0.sgpio.output_data_select);
444 }
445
446 void sci_controller_post_request(struct isci_host *ihost,
447 u32 request);
448 void sci_controller_release_frame(struct isci_host *ihost,
449 u32 frame_index);
450 void sci_controller_copy_sata_response(void *response_buffer,
451 void *frame_header,
452 void *frame_buffer);
453 enum sci_status sci_controller_allocate_remote_node_context(struct isci_host *ihost,
454 struct isci_remote_device *idev,
455 u16 *node_id);
456 void sci_controller_free_remote_node_context(
457 struct isci_host *ihost,
458 struct isci_remote_device *idev,
459 u16 node_id);
460
461 struct isci_request *sci_request_by_tag(struct isci_host *ihost, u16 io_tag);
462 void sci_controller_power_control_queue_insert(struct isci_host *ihost,
463 struct isci_phy *iphy);
464 void sci_controller_power_control_queue_remove(struct isci_host *ihost,
465 struct isci_phy *iphy);
466 void sci_controller_link_up(struct isci_host *ihost, struct isci_port *iport,
467 struct isci_phy *iphy);
468 void sci_controller_link_down(struct isci_host *ihost, struct isci_port *iport,
469 struct isci_phy *iphy);
470 void sci_controller_remote_device_stopped(struct isci_host *ihost,
471 struct isci_remote_device *idev);
472
473 enum sci_status sci_controller_continue_io(struct isci_request *ireq);
474 int isci_host_scan_finished(struct Scsi_Host *, unsigned long);
475 void isci_host_start(struct Scsi_Host *);
476 u16 isci_alloc_tag(struct isci_host *ihost);
477 enum sci_status isci_free_tag(struct isci_host *ihost, u16 io_tag);
478 void isci_tci_free(struct isci_host *ihost, u16 tci);
479 void ireq_done(struct isci_host *ihost, struct isci_request *ireq, struct sas_task *task);
480
481 int isci_host_init(struct isci_host *);
482 void isci_host_completion_routine(unsigned long data);
483 void isci_host_deinit(struct isci_host *);
484 void sci_controller_disable_interrupts(struct isci_host *ihost);
485 bool sci_controller_has_remote_devices_stopping(struct isci_host *ihost);
486 void sci_controller_transition_to_ready(struct isci_host *ihost, enum sci_status status);
487
488 enum sci_status sci_controller_start_io(
489 struct isci_host *ihost,
490 struct isci_remote_device *idev,
491 struct isci_request *ireq);
492
493 enum sci_task_status sci_controller_start_task(
494 struct isci_host *ihost,
495 struct isci_remote_device *idev,
496 struct isci_request *ireq);
497
498 enum sci_status sci_controller_terminate_request(
499 struct isci_host *ihost,
500 struct isci_remote_device *idev,
501 struct isci_request *ireq);
502
503 enum sci_status sci_controller_complete_io(
504 struct isci_host *ihost,
505 struct isci_remote_device *idev,
506 struct isci_request *ireq);
507
508 void sci_port_configuration_agent_construct(
509 struct sci_port_configuration_agent *port_agent);
510
511 enum sci_status sci_port_configuration_agent_initialize(
512 struct isci_host *ihost,
513 struct sci_port_configuration_agent *port_agent);
514
515 int isci_gpio_write(struct sas_ha_struct *, u8 reg_type, u8 reg_index,
516 u8 reg_count, u8 *write_data);
517 #endif
518