1 2menuconfig MACINTOSH_DRIVERS 3 bool "Macintosh device drivers" 4 depends on PPC || MAC || X86 5 default y if (PPC_PMAC || MAC) 6 ---help--- 7 Say Y here to get to see options for devices used with Macintosh 8 computers. This option alone does not add any kernel code. 9 10 If you say N, all options in this submenu will be skipped and disabled. 11 12if MACINTOSH_DRIVERS 13 14config ADB 15 bool "Apple Desktop Bus (ADB) support" 16 depends on MAC || (PPC_PMAC && PPC32) 17 help 18 Apple Desktop Bus (ADB) support is for support of devices which 19 are connected to an ADB port. ADB devices tend to have 4 pins. 20 If you have an Apple Macintosh prior to the iMac, an iBook or 21 PowerBook, or a "Blue and White G3", you probably want to say Y 22 here. Otherwise say N. 23 24config ADB_MACII 25 bool "Include Mac II ADB driver" 26 depends on ADB && MAC 27 help 28 Say Y here if want your kernel to support Macintosh systems that use 29 the Mac II style ADB. This includes the II, IIx, IIcx, SE/30, IIci, 30 Quadra 610, Quadra 650, Quadra 700, Quadra 800, Centris 610 and 31 Centris 650. 32 33config ADB_MACIISI 34 bool "Include Mac IIsi ADB driver" 35 depends on ADB && MAC && BROKEN 36 help 37 Say Y here if want your kernel to support Macintosh systems that use 38 the Mac IIsi style ADB. This includes the IIsi, IIvi, IIvx, Classic 39 II, LC, LC II, LC III, Performa 460, and the Performa 600. 40 41config ADB_IOP 42 bool "Include IOP (IIfx/Quadra 9x0) ADB driver" 43 depends on ADB && MAC 44 help 45 The I/O Processor (IOP) is an Apple custom IC designed to provide 46 intelligent support for I/O controllers. It is described at 47 <http://www.angelfire.com/ca2/dev68k/iopdesc.html> to enable direct 48 support for it, say 'Y' here. 49 50config ADB_PMU68K 51 bool "Include PMU (Powerbook) ADB driver" 52 depends on ADB && MAC 53 help 54 Say Y here if want your kernel to support the m68k based Powerbooks. 55 This includes the PowerBook 140, PowerBook 145, PowerBook 150, 56 PowerBook 160, PowerBook 165, PowerBook 165c, PowerBook 170, 57 PowerBook 180, PowerBook, 180c, PowerBook 190cs, PowerBook 520, 58 PowerBook Duo 210, PowerBook Duo 230, PowerBook Duo 250, 59 PowerBook Duo 270c, PowerBook Duo 280 and PowerBook Duo 280c. 60 61# we want to change this to something like CONFIG_SYSCTRL_CUDA/PMU 62config ADB_CUDA 63 bool "Support for CUDA based Macs and PowerMacs" 64 depends on (ADB || PPC_PMAC) && !PPC_PMAC64 65 help 66 This provides support for CUDA based Macintosh and Power Macintosh 67 systems. This includes many m68k based Macs (Color Classic, Mac TV, 68 Performa 475, Performa 520, Performa 550, Performa 575, 69 Performa 588, Quadra 605, Quadra 630, Quadra/Centris 660AV, and 70 Quadra 840AV), most OldWorld PowerMacs, the first generation iMacs, 71 the Blue&White G3 and the "Yikes" G4 (PCI Graphics). All later 72 models should use CONFIG_ADB_PMU instead. It is safe to say Y here 73 even if your machine doesn't have a CUDA. 74 75 If unsure say Y. 76 77config ADB_PMU 78 bool "Support for PMU based PowerMacs" 79 depends on PPC_PMAC 80 help 81 On PowerBooks, iBooks, and recent iMacs and Power Macintoshes, the 82 PMU is an embedded microprocessor whose primary function is to 83 control system power, and battery charging on the portable models. 84 The PMU also controls the ADB (Apple Desktop Bus) which connects to 85 the keyboard and mouse on some machines, as well as the non-volatile 86 RAM and the RTC (real time clock) chip. Say Y to enable support for 87 this device; you should do so if your machine is one of those 88 mentioned above. 89 90config ADB_PMU_LED 91 bool "Support for the Power/iBook front LED" 92 depends on ADB_PMU 93 select NEW_LEDS 94 select LEDS_CLASS 95 help 96 Support the front LED on Power/iBooks as a generic LED that can 97 be triggered by any of the supported triggers. To get the 98 behaviour of the old CONFIG_BLK_DEV_IDE_PMAC_BLINK, select this 99 and the ide-disk LED trigger and configure appropriately through 100 sysfs. 101 102config ADB_PMU_LED_IDE 103 bool "Use front LED as IDE LED by default" 104 depends on ADB_PMU_LED 105 depends on LEDS_CLASS 106 depends on IDE_GD_ATA 107 select LEDS_TRIGGERS 108 select LEDS_TRIGGER_IDE_DISK 109 help 110 This option makes the front LED default to the IDE trigger 111 so that it blinks on IDE activity. 112 113config PMAC_SMU 114 bool "Support for SMU based PowerMacs" 115 depends on PPC_PMAC64 116 help 117 This option adds support for the newer G5 iMacs and PowerMacs based 118 on the "SMU" system control chip which replaces the old PMU. 119 If you don't know, say Y. 120 121config PMAC_APM_EMU 122 tristate "APM emulation" 123 select APM_EMULATION 124 depends on ADB_PMU && PM && PPC32 125 126config PMAC_MEDIABAY 127 bool "Support PowerBook hotswap media bay" 128 depends on PPC_PMAC && PPC32 && BLOCK 129 help 130 This option adds support for older PowerBook's hotswap media bay 131 that can contains batteries, floppy drives, or IDE devices. PCI 132 devices are not fully supported in the bay as I never had one to 133 try with 134 135config PMAC_BACKLIGHT 136 bool "Backlight control for LCD screens" 137 depends on ADB_PMU && FB = y && (BROKEN || !PPC64) 138 select FB_BACKLIGHT 139 help 140 Say Y here to enable Macintosh specific extensions of the generic 141 backlight code. With this enabled, the brightness keys on older 142 PowerBooks will be enabled so you can change the screen brightness. 143 Newer models should use a userspace daemon like pbbuttonsd. 144 145config PMAC_BACKLIGHT_LEGACY 146 bool "Provide legacy ioctl's on /dev/pmu for the backlight" 147 depends on PMAC_BACKLIGHT && (BROKEN || !PPC64) 148 help 149 Say Y if you want to enable legacy ioctl's on /dev/pmu. This is for 150 programs which use this old interface. New and updated programs 151 should use the backlight classes in sysfs. 152 153config ADB_MACIO 154 bool "Include MacIO (CHRP) ADB driver" 155 depends on ADB && PPC_CHRP && !PPC_PMAC64 156 help 157 Say Y here to include direct support for the ADB controller in the 158 Hydra chip used on PowerPC Macintoshes of the CHRP type. (The Hydra 159 also includes a MESH II SCSI controller, DBDMA controller, VIA chip, 160 OpenPIC controller and two RS422/Geoports.) 161 162config INPUT_ADBHID 163 bool "Support for ADB input devices (keyboard, mice, ...)" 164 depends on ADB && INPUT=y 165 help 166 Say Y here if you want to have ADB (Apple Desktop Bus) HID devices 167 such as keyboards, mice, joysticks, trackpads or graphic tablets 168 handled by the input layer. If you say Y here, make sure to say Y to 169 the corresponding drivers "Keyboard support" (CONFIG_INPUT_KEYBDEV), 170 "Mouse Support" (CONFIG_INPUT_MOUSEDEV) and "Event interface 171 support" (CONFIG_INPUT_EVDEV) as well. 172 173 If unsure, say Y. 174 175config MAC_EMUMOUSEBTN 176 tristate "Support for mouse button 2+3 emulation" 177 depends on SYSCTL && INPUT 178 help 179 This provides generic support for emulating the 2nd and 3rd mouse 180 button with keypresses. If you say Y here, the emulation is still 181 disabled by default. The emulation is controlled by these sysctl 182 entries: 183 /proc/sys/dev/mac_hid/mouse_button_emulation 184 /proc/sys/dev/mac_hid/mouse_button2_keycode 185 /proc/sys/dev/mac_hid/mouse_button3_keycode 186 187 If you have an Apple machine with a 1-button mouse, say Y here. 188 189 To compile this driver as a module, choose M here: the 190 module will be called mac_hid. 191 192config THERM_WINDTUNNEL 193 tristate "Support for thermal management on Windtunnel G4s" 194 depends on I2C && I2C_POWERMAC && PPC_PMAC && !PPC_PMAC64 195 help 196 This driver provides some thermostat and fan control for the desktop 197 G4 "Windtunnel" 198 199config THERM_ADT746X 200 tristate "Support for thermal mgmnt on laptops with ADT 746x chipset" 201 depends on I2C && I2C_POWERMAC && PPC_PMAC && !PPC_PMAC64 202 help 203 This driver provides some thermostat and fan control for the 204 iBook G4, and the ATI based aluminium PowerBooks, allowing slightly 205 better fan behaviour by default, and some manual control. 206 207config THERM_PM72 208 tristate "Support for thermal management on PowerMac G5 (AGP)" 209 depends on I2C && I2C_POWERMAC && PPC_PMAC64 210 default n 211 help 212 This driver provides thermostat and fan control for the desktop 213 G5 machines. 214 215 This is deprecated, use windfarm instead. 216 217config WINDFARM 218 tristate "New PowerMac thermal control infrastructure" 219 depends on PPC 220 221config WINDFARM_PM81 222 tristate "Support for thermal management on iMac G5" 223 depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && PMAC_SMU 224 select I2C_POWERMAC 225 help 226 This driver provides thermal control for the iMacG5 227 228config WINDFARM_PM72 229 tristate "Support for thermal management on PowerMac G5 (AGP)" 230 depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && ADB_PMU 231 select I2C_POWERMAC 232 help 233 This driver provides thermal control for the PowerMac G5 234 "AGP" variants (PowerMac 7,2 and 7,3) 235 236config WINDFARM_RM31 237 tristate "Support for thermal management on Xserve G5" 238 depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && ADB_PMU 239 select I2C_POWERMAC 240 help 241 This driver provides thermal control for the Xserve G5 242 (RackMac3,1) 243 244config WINDFARM_PM91 245 tristate "Support for thermal management on PowerMac9,1" 246 depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && PMAC_SMU 247 select I2C_POWERMAC 248 help 249 This driver provides thermal control for the PowerMac9,1 250 which is the recent (SMU based) single CPU desktop G5 251 252config WINDFARM_PM112 253 tristate "Support for thermal management on PowerMac11,2" 254 depends on WINDFARM && I2C && PMAC_SMU 255 select I2C_POWERMAC 256 help 257 This driver provides thermal control for the PowerMac11,2 258 which are the recent dual and quad G5 machines using the 259 970MP dual-core processor. 260 261config WINDFARM_PM121 262 tristate "Support for thermal management on PowerMac12,1" 263 depends on WINDFARM && I2C && PMAC_SMU 264 select I2C_POWERMAC 265 help 266 This driver provides thermal control for the PowerMac12,1 267 which is the iMac G5 (iSight). 268 269config ANSLCD 270 tristate "Support for ANS LCD display" 271 depends on ADB_CUDA && PPC_PMAC 272 273config PMAC_RACKMETER 274 tristate "Support for Apple XServe front panel LEDs" 275 depends on PPC_PMAC 276 help 277 This driver provides some support to control the front panel 278 blue LEDs "vu-meter" of the XServer macs. 279 280config SENSORS_AMS 281 tristate "Apple Motion Sensor driver" 282 depends on PPC_PMAC && !PPC64 && INPUT && ((ADB_PMU && I2C = y) || (ADB_PMU && !I2C) || I2C) 283 select INPUT_POLLDEV 284 help 285 Support for the motion sensor included in PowerBooks. Includes 286 implementations for PMU and I2C. 287 288 This driver can also be built as a module. If so, the module 289 will be called ams. 290 291config SENSORS_AMS_PMU 292 bool "PMU variant" 293 depends on SENSORS_AMS && ADB_PMU 294 default y 295 help 296 PMU variant of motion sensor, found in late 2005 PowerBooks. 297 298config SENSORS_AMS_I2C 299 bool "I2C variant" 300 depends on SENSORS_AMS && I2C 301 default y 302 help 303 I2C variant of motion sensor, found in early 2005 PowerBooks and 304 iBooks. 305 306endif # MACINTOSH_DRIVERS 307