1/ { 2 mbus { 3 pciec: pcie-controller { 4 compatible = "marvell,kirkwood-pcie"; 5 status = "disabled"; 6 device_type = "pci"; 7 8 #address-cells = <3>; 9 #size-cells = <2>; 10 11 bus-range = <0x00 0xff>; 12 13 ranges = 14 <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 15 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */ 16 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */>; 17 18 pcie0: pcie@1,0 { 19 device_type = "pci"; 20 assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>; 21 reg = <0x0800 0 0 0 0>; 22 #address-cells = <3>; 23 #size-cells = <2>; 24 #interrupt-cells = <1>; 25 ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 26 0x81000000 0 0 0x81000000 0x1 0 1 0>; 27 interrupt-map-mask = <0 0 0 0>; 28 interrupt-map = <0 0 0 0 &intc 9>; 29 marvell,pcie-port = <0>; 30 marvell,pcie-lane = <0>; 31 clocks = <&gate_clk 2>; 32 status = "disabled"; 33 }; 34 }; 35 }; 36 37 ocp@f1000000 { 38 pinctrl: pin-controller@10000 { 39 compatible = "marvell,88f6281-pinctrl"; 40 41 pmx_sata0: pmx-sata0 { 42 marvell,pins = "mpp5", "mpp21", "mpp23"; 43 marvell,function = "sata0"; 44 }; 45 pmx_sata1: pmx-sata1 { 46 marvell,pins = "mpp4", "mpp20", "mpp22"; 47 marvell,function = "sata1"; 48 }; 49 pmx_sdio: pmx-sdio { 50 marvell,pins = "mpp12", "mpp13", "mpp14", 51 "mpp15", "mpp16", "mpp17"; 52 marvell,function = "sdio"; 53 }; 54 }; 55 56 rtc: rtc@10300 { 57 compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc"; 58 reg = <0x10300 0x20>; 59 interrupts = <53>; 60 clocks = <&gate_clk 7>; 61 }; 62 63 sata: sata@80000 { 64 compatible = "marvell,orion-sata"; 65 reg = <0x80000 0x5000>; 66 interrupts = <21>; 67 clocks = <&gate_clk 14>, <&gate_clk 15>; 68 clock-names = "0", "1"; 69 phys = <&sata_phy0>, <&sata_phy1>; 70 phy-names = "port0", "port1"; 71 status = "disabled"; 72 }; 73 74 sdio: mvsdio@90000 { 75 compatible = "marvell,orion-sdio"; 76 reg = <0x90000 0x200>; 77 interrupts = <28>; 78 clocks = <&gate_clk 4>; 79 pinctrl-0 = <&pmx_sdio>; 80 pinctrl-names = "default"; 81 bus-width = <4>; 82 cap-sdio-irq; 83 cap-sd-highspeed; 84 cap-mmc-highspeed; 85 status = "disabled"; 86 }; 87 }; 88}; 89