/arch/arm/mach-omap2/ |
D | sram243x.S | 51 ldr r2, omap243x_sdi_cm_clksel2_pll @ get address of dpllout reg 61 ldr r10, [r11] @ get current val 64 mvn r9, #0x4 @ mask to get clear bit2 72 add r11, r11, #0x4 @ get addr of status reg 73 ldr r10, [r11] @ get locked value 111 ldr r4, omap243x_sdi_prcm_voltctrl @ get addr of volt ctrl. 112 ldr r5, [r4] @ get value. 113 ldr r6, prcm_mask_val @ get value of mask 117 mov r3, #0x4000 @ get val for force 121 ldr r3, omap243x_sdi_timer_32ksynct_cr @ get addr of counter [all …]
|
D | sram242x.S | 51 ldr r2, omap242x_sdi_cm_clksel2_pll @ get address of dpllout reg 61 ldr r10, [r11] @ get current val 64 mvn r9, #0x4 @ mask to get clear bit2 72 add r11, r11, #0x4 @ get addr of status reg 73 ldr r10, [r11] @ get locked value 111 ldr r4, omap242x_sdi_prcm_voltctrl @ get addr of volt ctrl. 112 ldr r5, [r4] @ get value. 113 ldr r6, prcm_mask_val @ get value of mask 117 mov r3, #0x4000 @ get val for force 121 ldr r3, omap242x_sdi_timer_32ksynct_cr @ get addr of counter [all …]
|
D | sleep34xx.S | 552 ldr r4, sdrc_syscfg @ get config addr 553 ldr r5, [r4] @ get value 558 ldr r4, sdrc_mr_0 @ get config addr 559 ldr r5, [r4] @ get value 561 ldr r4, sdrc_emr2_0 @ get config addr 562 ldr r5, [r4] @ get value 564 ldr r4, sdrc_manual_0 @ get config addr 567 ldr r4, sdrc_mr_1 @ get config addr 568 ldr r5, [r4] @ get value 570 ldr r4, sdrc_emr2_1 @ get config addr [all …]
|
/arch/s390/net/ |
D | bpf_jit.S | 41 l %r5,0(%r1,%r10) # get word from skb 49 brasl %r14,skb_copy_bits # get data from skb 66 llgh %r5,0(%r1,%r10) # get half from skb 74 brasl %r14,skb_copy_bits # get data from skb 92 ic %r5,0(%r1,%r10) # get byte from skb 100 brasl %r14,skb_copy_bits # get data from skb 113 ic %r12,0(%r1,%r10) # get byte from skb 123 brasl %r14,skb_copy_bits # get data from skb
|
/arch/arm/mm/ |
D | pabort-v7.S | 18 mrc p15, 0, r0, c6, c0, 2 @ get IFAR 19 mrc p15, 0, r1, c5, c0, 1 @ get IFSR
|
D | abort-ev6.S | 20 mrc p15, 0, r1, c5, c0, 0 @ get FSR 21 mrc p15, 0, r0, c6, c0, 0 @ get FAR 27 mrc p15, 0, r3, c0, c0, 0 @ get processor id
|
D | abort-ev4.S | 19 mrc p15, 0, r1, c5, c0, 0 @ get FSR 20 mrc p15, 0, r0, c6, c0, 0 @ get FAR
|
D | abort-ev4t.S | 20 mrc p15, 0, r1, c5, c0, 0 @ get FSR 21 mrc p15, 0, r0, c6, c0, 0 @ get FAR
|
D | abort-ev5t.S | 20 mrc p15, 0, r1, c5, c0, 0 @ get FSR 21 mrc p15, 0, r0, c6, c0, 0 @ get FAR
|
D | abort-ev5tj.S | 20 mrc p15, 0, r1, c5, c0, 0 @ get FSR 21 mrc p15, 0, r0, c6, c0, 0 @ get FAR
|
D | abort-ev7.S | 16 mrc p15, 0, r1, c5, c0, 0 @ get FSR 17 mrc p15, 0, r0, c6, c0, 0 @ get FAR
|
D | tlb-v6.S | 37 vma_vm_mm r3, r2 @ get vma->vm_mm 39 mmid r3, r3 @ get vm_mm->context.id 46 vma_vm_flags r2, r2 @ get vma->vm_flags
|
/arch/arm/include/asm/hardware/ |
D | entry-macro-iomd.S | 15 ldrb \irqstat, [\base, #IOMD_IRQREQB] @ get high priority first 19 ldreqb \irqstat, [\base, #IOMD_DMAREQ] @ get dma 24 ldreqb \irqstat, [\base, #IOMD_IRQREQA] @ get low priority 37 2406: ldrneb \irqnr, [\tmp, \irqstat] @ get IRQ number
|
/arch/arm/mach-s3c24xx/ |
D | sleep-s3c2410.S | 49 ldr r7, [r4] @ get REFRESH (and ensure in TLB) 50 ldr r8, [r5] @ get MISCCR (and ensure in TLB) 51 ldr r9, [r6] @ get CLKCON (and ensure in TLB)
|
/arch/arm/kernel/ |
D | iwmmxt.S | 89 add r0, r10, #TI_IWMMXT_STATE @ get task Concan save area 91 ldr r1, [r3] @ get current Concan owner 204 add r2, r0, #TI_IWMMXT_STATE @ get task Concan save area 205 ldr r1, [r3] @ get current Concan owner 256 add r2, r0, #TI_IWMMXT_STATE @ get task Concan save area 257 ldr r3, [r3] @ get current Concan owner 294 add r2, r0, #TI_IWMMXT_STATE @ get task Concan save area 295 ldr r3, [r3] @ get current Concan owner 333 add r3, r0, #TI_IWMMXT_STATE @ get next task Concan save area 334 ldr r2, [r2] @ get current Concan owner [all …]
|
/arch/xtensa/lib/ |
D | strnlen_user.S | 80 EX(l32i, a9, a4, 4, lenfixup) # get next word of string 116 sub a2, a4, a2 # subtract to get length 120 sub a2, a4, a2 # subtract to get length 124 sub a2, a4, a2 # subtract to get length 128 EX(l8ui, a9, a4, 4, lenfixup) # get byte 0 135 EX(l32i, a9, a4, 0, lenfixup) # get word with first two bytes of string 140 sub a2, a4, a2 # subtract to get length
|
/arch/arm/mach-ixp4xx/include/mach/ |
D | entry-macro.S | 17 ldr \irqstat, [\irqstat] @ get interrupts 32 ldr \irqstat, [\irqstat] @ get upper interrupts
|
/arch/x86/pci/ |
D | irq.c | 46 int (*get)(struct pci_dev *router, struct pci_dev *dev, int pirq); member 592 r->get = pirq_piix_get; in intel_router_probe() 606 r->get = pirq_piix_get; in intel_router_probe() 651 r->get = pirq_via586_get; in via_router_probe() 662 r->get = pirq_via_get; in via_router_probe() 674 r->get = pirq_vlsi_get; in vlsi_router_probe() 689 r->get = pirq_serverworks_get; in serverworks_router_probe() 702 r->get = pirq_sis_get; in sis_router_probe() 712 r->get = pirq_cyrix_get; in cyrix_router_probe() 724 r->get = pirq_opti_get; in opti_router_probe() [all …]
|
/arch/m68k/fpsp040/ |
D | x_store.S | 90 movel EXC_EA(%a6),%a0 |get the address 114 | get rid of ext integer bit 132 movew LOCAL_EX(%a1),%d0 |get exponent 154 movel LOCAL_HI(%a1),%d1 |get ms mantissa 155 bfextu %d1{#1:#20},%d1 |get upper 20 bits of ms 158 movel LOCAL_HI(%a1),%d1 |get ms mantissa 162 movel LOCAL_LO(%a1),%d1 |get ls mantissa 163 bfextu %d1{#0:#21},%d0 |get ls 21 bits of double
|
D | get_op.S | 495 movew ETEMP(%a6),%d0 |get word with inf information 496 bfextu %d0{#20:#12},%d1 |get exponent into d1 499 bfextu %d0{#17:#3},%d1 |get SE and y bits into d1 514 movew ETEMP_EX+2(%a6),%d0 |get word 4 547 movew ETEMP(%a6),%d0 |get word with inf information 548 bfextu %d0{#20:#12},%d1 |get exponent into d1 551 bfextu %d0{#17:#3},%d1 |get SE and y bits into d1 581 movew ETEMP_EX+2(%a6),%d0 |get word 4 611 movew CMDREG1B(%a6),%d0 |get the command word
|
/arch/mips/alchemy/common/ |
D | gpiolib.c | 102 .get = gpio1_get, 112 .get = gpio2_get, 150 .get = alchemy_gpic_get,
|
/arch/arm/nwfpe/ |
D | entry.S | 82 ldr r5, [sp, #S_PC] @ get contents of PC; 90 bne next @ get the next instruction; 99 .Lx1: ldrt r6, [r5], #4 @ get the next instruction and
|
/arch/arm/mach-ep93xx/ |
D | crunch-bits.S | 82 add r0, r10, #TI_CRUNCH_STATE @ get task crunch save area 84 ldr r1, [r3] @ get current crunch owner 219 add r2, r0, #TI_CRUNCH_STATE @ get task crunch save area 220 ldr r1, [r3] @ get current crunch owner 263 add r2, r0, #TI_CRUNCH_STATE @ get task crunch save area 264 ldr r3, [r3] @ get current crunch owner 296 add r2, r0, #TI_CRUNCH_STATE @ get task crunch save area 297 ldr r3, [r3] @ get current crunch owner
|
/arch/powerpc/lib/ |
D | div64.S | 20 lwz r5,0(r3) # get the dividend into r5/r6 44 2: mullw r10,r11,r4 # to get an estimate of the quotient, 53 mullw r10,r0,r4 # and get the remainder
|
/arch/arm/mach-mvebu/ |
D | pmsu_ll.S | 30 mrc p15, 4, r1, c15, c0 @ get SCU base address 32 mrc 15, 0, r0, cr0, cr0, 5 @ get the CPU ID
|