Lines Matching refs:PCMCIA
2 # PCCARD (PCMCIA/CardBus) bus subsystem configuration
6 tristate "PCCard (PCMCIA/CardBus) support"
9 Say Y here if you want to attach PCMCIA- or PC-cards to your Linux
12 actually two varieties of these cards: 16 bit PCMCIA and 32 bit
20 config PCMCIA config
21 tristate "16-bit PCMCIA support"
25 This option enables support for 16-bit PCMCIA cards. Most older
26 PC-cards are such 16-bit PCMCIA cards, so unless you know you're
29 To use 16-bit PCMCIA cards, you will need supporting software in
40 depends on PCMCIA && EXPERIMENTAL
44 Some PCMCIA cards require an updated Card Information Structure (CIS)
58 for 32 bit PC-cards (the original PCMCIA standard specifies only
62 bridge. Virtually all modern PCMCIA bridges do this, and most of
73 select PCCARD_NONSTATIC if PCMCIA != n
76 all modern PCMCIA bridges are CardBus compatible. A "bridge" is
77 the hardware inside your computer that PCMCIA cards are plugged
112 depends on PCMCIA && PCI
115 This provides support for the Cirrus PD6729 PCI-to-PCMCIA bridge
116 device, found in some older laptops and PCMCIA card readers.
120 depends on PCMCIA && PCI
123 This provides support for the Intel I82092AA PCI-to-PCMCIA bridge device,
129 depends on PCMCIA && ISA
132 Say Y here to include support for ISA-bus PCMCIA host bridges that
135 "bridge" is the hardware inside your computer that PCMCIA cards are
140 depends on PCMCIA && ISA
143 Say Y here to include support for the Databook TCIC family of PCMCIA
146 PCMCIA cards are plugged into. If unsure, say N.
149 tristate "MPC8xx PCMCIA support"
151 select PCCARD_IODYN if PCMCIA != n
153 Say Y here to include support for PowerPC 8xx series PCMCIA
159 tristate "Alchemy Db/Pb1xxx PCMCIA socket services"
160 depends on MIPS_ALCHEMY && PCMCIA
163 Enable this driver of you want PCMCIA support on your Alchemy
170 tristate "MyCable XXS1500 PCMCIA socket support"
171 depends on PCMCIA && MIPS_XXS1500
174 Support for the PCMCIA/CF socket interface on MyCable XXS1500
181 depends on BCM63XX && PCMCIA
191 depends on ARM && ARCH_SA1100 && PCMCIA
195 Say Y here to include support for SA11x0-based PCMCIA or CF
203 depends on ARM && SA1111 && PCMCIA
207 Say Y here to include support for SA1111-based PCMCIA or CF
215 depends on ARM && ARCH_PXA && PCMCIA
224 Say Y here to include support for the PXA2xx PCMCIA controller
230 Say Y here to enable debugging for the SoC PCMCIA layer.
249 bool "M32R PCMCIA I/F"
250 depends on M32R && CHIP_M32700 && PCMCIA
252 Say Y here to use the M32R PCMCIA controller.
269 depends on CPU_VR41XX && ISA && PCMCIA
273 depends on CPU_VR41XX && PCI && PCMCIA
277 depends on PCMCIA && ARCH_OMAP16XX
283 tristate "Blackfin CompactFlash PCMCIA Driver"
284 depends on PCMCIA && BLACKFIN
286 Say Y here to support the CompactFlash PCMCIA driver for Blackfin.
291 depends on PCMCIA && ARCH_AT91RM9200
298 depends on PCMCIA && PPC_PASEMI