1# 2# PCMCIA character device configuration 3# 4 5menu "PCMCIA character devices" 6 depends on HOTPLUG && PCMCIA!=n 7 8config SYNCLINK_CS 9 tristate "SyncLink PC Card support" 10 depends on PCMCIA 11 help 12 Enable support for the SyncLink PC Card serial adapter, running 13 asynchronous and HDLC communications up to 512Kbps. The port is 14 selectable for RS-232, V.35, RS-449, RS-530, and X.21 15 16 This driver may be built as a module ( = code which can be 17 inserted in and removed from the running kernel whenever you want). 18 The module will be called synclinkmp. If you want to do that, say M 19 here. 20 21config CARDMAN_4000 22 tristate "Omnikey Cardman 4000 support" 23 depends on PCMCIA 24 select BITREVERSE 25 help 26 Enable support for the Omnikey Cardman 4000 PCMCIA Smartcard 27 reader. 28 29 This kernel driver requires additional userspace support, either 30 by the vendor-provided PC/SC ifd_handler (http://www.omnikey.com/), 31 or via the cm4000 backend of OpenCT (http://www.opensc-project.org/opensc). 32 33config CARDMAN_4040 34 tristate "Omnikey CardMan 4040 support" 35 depends on PCMCIA 36 help 37 Enable support for the Omnikey CardMan 4040 PCMCIA Smartcard 38 reader. 39 40 This card is basically a USB CCID device connected to a FIFO 41 in I/O space. To use the kernel driver, you will need either the 42 PC/SC ifdhandler provided from the Omnikey homepage 43 (http://www.omnikey.com/), or a current development version of OpenCT 44 (http://www.opensc-project.org/opensc). 45 46config IPWIRELESS 47 tristate "IPWireless 3G UMTS PCMCIA card support" 48 depends on PCMCIA && NETDEVICES 49 select PPP 50 help 51 This is a driver for 3G UMTS PCMCIA card from IPWireless company. In 52 some countries (for example Czech Republic, T-Mobile ISP) this card 53 is shipped for service called UMTS 4G. 54 55endmenu 56 57