1 #ifndef _LINUX_JIFFIES_H
2 #define _LINUX_JIFFIES_H
3
4 #include <linux/math64.h>
5 #include <linux/kernel.h>
6 #include <linux/types.h>
7 #include <linux/time.h>
8 #include <linux/timex.h>
9 #include <asm/param.h> /* for HZ */
10
11 /*
12 * The following defines establish the engineering parameters of the PLL
13 * model. The HZ variable establishes the timer interrupt frequency, 100 Hz
14 * for the SunOS kernel, 256 Hz for the Ultrix kernel and 1024 Hz for the
15 * OSF/1 kernel. The SHIFT_HZ define expresses the same value as the
16 * nearest power of two in order to avoid hardware multiply operations.
17 */
18 #if HZ >= 12 && HZ < 24
19 # define SHIFT_HZ 4
20 #elif HZ >= 24 && HZ < 48
21 # define SHIFT_HZ 5
22 #elif HZ >= 48 && HZ < 96
23 # define SHIFT_HZ 6
24 #elif HZ >= 96 && HZ < 192
25 # define SHIFT_HZ 7
26 #elif HZ >= 192 && HZ < 384
27 # define SHIFT_HZ 8
28 #elif HZ >= 384 && HZ < 768
29 # define SHIFT_HZ 9
30 #elif HZ >= 768 && HZ < 1536
31 # define SHIFT_HZ 10
32 #elif HZ >= 1536 && HZ < 3072
33 # define SHIFT_HZ 11
34 #elif HZ >= 3072 && HZ < 6144
35 # define SHIFT_HZ 12
36 #elif HZ >= 6144 && HZ < 12288
37 # define SHIFT_HZ 13
38 #else
39 # error Invalid value of HZ.
40 #endif
41
42 /* LATCH is used in the interval timer and ftape setup. */
43 #define LATCH ((CLOCK_TICK_RATE + HZ/2) / HZ) /* For divider */
44
45 /* Suppose we want to divide two numbers NOM and DEN: NOM/DEN, then we can
46 * improve accuracy by shifting LSH bits, hence calculating:
47 * (NOM << LSH) / DEN
48 * This however means trouble for large NOM, because (NOM << LSH) may no
49 * longer fit in 32 bits. The following way of calculating this gives us
50 * some slack, under the following conditions:
51 * - (NOM / DEN) fits in (32 - LSH) bits.
52 * - (NOM % DEN) fits in (32 - LSH) bits.
53 */
54 #define SH_DIV(NOM,DEN,LSH) ( (((NOM) / (DEN)) << (LSH)) \
55 + ((((NOM) % (DEN)) << (LSH)) + (DEN) / 2) / (DEN))
56
57 /* HZ is the requested value. ACTHZ is actual HZ ("<< 8" is for accuracy) */
58 #define ACTHZ (SH_DIV (CLOCK_TICK_RATE, LATCH, 8))
59
60 /* TICK_NSEC is the time between ticks in nsec assuming real ACTHZ */
61 #define TICK_NSEC (SH_DIV (1000000UL * 1000, ACTHZ, 8))
62
63 /* TICK_USEC is the time between ticks in usec assuming fake USER_HZ */
64 #define TICK_USEC ((1000000UL + USER_HZ/2) / USER_HZ)
65
66 /* TICK_USEC_TO_NSEC is the time between ticks in nsec assuming real ACTHZ and */
67 /* a value TUSEC for TICK_USEC (can be set bij adjtimex) */
68 #define TICK_USEC_TO_NSEC(TUSEC) (SH_DIV (TUSEC * USER_HZ * 1000, ACTHZ, 8))
69
70 /* some arch's have a small-data section that can be accessed register-relative
71 * but that can only take up to, say, 4-byte variables. jiffies being part of
72 * an 8-byte variable may not be correctly accessed unless we force the issue
73 */
74 #define __jiffy_data __attribute__((section(".data")))
75
76 /*
77 * The 64-bit value is not atomic - you MUST NOT read it
78 * without sampling the sequence number in xtime_lock.
79 * get_jiffies_64() will do this for you as appropriate.
80 */
81 extern u64 __jiffy_data jiffies_64;
82 extern unsigned long volatile __jiffy_data jiffies;
83
84 #if (BITS_PER_LONG < 64)
85 u64 get_jiffies_64(void);
86 #else
get_jiffies_64(void)87 static inline u64 get_jiffies_64(void)
88 {
89 return (u64)jiffies;
90 }
91 #endif
92
93 /*
94 * These inlines deal with timer wrapping correctly. You are
95 * strongly encouraged to use them
96 * 1. Because people otherwise forget
97 * 2. Because if the timer wrap changes in future you won't have to
98 * alter your driver code.
99 *
100 * time_after(a,b) returns true if the time a is after time b.
101 *
102 * Do this with "<0" and ">=0" to only test the sign of the result. A
103 * good compiler would generate better code (and a really good compiler
104 * wouldn't care). Gcc is currently neither.
105 */
106 #define time_after(a,b) \
107 (typecheck(unsigned long, a) && \
108 typecheck(unsigned long, b) && \
109 ((long)(b) - (long)(a) < 0))
110 #define time_before(a,b) time_after(b,a)
111
112 #define time_after_eq(a,b) \
113 (typecheck(unsigned long, a) && \
114 typecheck(unsigned long, b) && \
115 ((long)(a) - (long)(b) >= 0))
116 #define time_before_eq(a,b) time_after_eq(b,a)
117
118 /*
119 * Calculate whether a is in the range of [b, c].
120 */
121 #define time_in_range(a,b,c) \
122 (time_after_eq(a,b) && \
123 time_before_eq(a,c))
124
125 /*
126 * Calculate whether a is in the range of [b, c).
127 */
128 #define time_in_range_open(a,b,c) \
129 (time_after_eq(a,b) && \
130 time_before(a,c))
131
132 /* Same as above, but does so with platform independent 64bit types.
133 * These must be used when utilizing jiffies_64 (i.e. return value of
134 * get_jiffies_64() */
135 #define time_after64(a,b) \
136 (typecheck(__u64, a) && \
137 typecheck(__u64, b) && \
138 ((__s64)(b) - (__s64)(a) < 0))
139 #define time_before64(a,b) time_after64(b,a)
140
141 #define time_after_eq64(a,b) \
142 (typecheck(__u64, a) && \
143 typecheck(__u64, b) && \
144 ((__s64)(a) - (__s64)(b) >= 0))
145 #define time_before_eq64(a,b) time_after_eq64(b,a)
146
147 /*
148 * These four macros compare jiffies and 'a' for convenience.
149 */
150
151 /* time_is_before_jiffies(a) return true if a is before jiffies */
152 #define time_is_before_jiffies(a) time_after(jiffies, a)
153
154 /* time_is_after_jiffies(a) return true if a is after jiffies */
155 #define time_is_after_jiffies(a) time_before(jiffies, a)
156
157 /* time_is_before_eq_jiffies(a) return true if a is before or equal to jiffies*/
158 #define time_is_before_eq_jiffies(a) time_after_eq(jiffies, a)
159
160 /* time_is_after_eq_jiffies(a) return true if a is after or equal to jiffies*/
161 #define time_is_after_eq_jiffies(a) time_before_eq(jiffies, a)
162
163 /*
164 * Have the 32 bit jiffies value wrap 5 minutes after boot
165 * so jiffies wrap bugs show up earlier.
166 */
167 #define INITIAL_JIFFIES ((unsigned long)(unsigned int) (-300*HZ))
168
169 /*
170 * Change timeval to jiffies, trying to avoid the
171 * most obvious overflows..
172 *
173 * And some not so obvious.
174 *
175 * Note that we don't want to return LONG_MAX, because
176 * for various timeout reasons we often end up having
177 * to wait "jiffies+1" in order to guarantee that we wait
178 * at _least_ "jiffies" - so "jiffies+1" had better still
179 * be positive.
180 */
181 #define MAX_JIFFY_OFFSET ((LONG_MAX >> 1)-1)
182
183 extern unsigned long preset_lpj;
184
185 /*
186 * We want to do realistic conversions of time so we need to use the same
187 * values the update wall clock code uses as the jiffies size. This value
188 * is: TICK_NSEC (which is defined in timex.h). This
189 * is a constant and is in nanoseconds. We will use scaled math
190 * with a set of scales defined here as SEC_JIFFIE_SC, USEC_JIFFIE_SC and
191 * NSEC_JIFFIE_SC. Note that these defines contain nothing but
192 * constants and so are computed at compile time. SHIFT_HZ (computed in
193 * timex.h) adjusts the scaling for different HZ values.
194
195 * Scaled math??? What is that?
196 *
197 * Scaled math is a way to do integer math on values that would,
198 * otherwise, either overflow, underflow, or cause undesired div
199 * instructions to appear in the execution path. In short, we "scale"
200 * up the operands so they take more bits (more precision, less
201 * underflow), do the desired operation and then "scale" the result back
202 * by the same amount. If we do the scaling by shifting we avoid the
203 * costly mpy and the dastardly div instructions.
204
205 * Suppose, for example, we want to convert from seconds to jiffies
206 * where jiffies is defined in nanoseconds as NSEC_PER_JIFFIE. The
207 * simple math is: jiff = (sec * NSEC_PER_SEC) / NSEC_PER_JIFFIE; We
208 * observe that (NSEC_PER_SEC / NSEC_PER_JIFFIE) is a constant which we
209 * might calculate at compile time, however, the result will only have
210 * about 3-4 bits of precision (less for smaller values of HZ).
211 *
212 * So, we scale as follows:
213 * jiff = (sec) * (NSEC_PER_SEC / NSEC_PER_JIFFIE);
214 * jiff = ((sec) * ((NSEC_PER_SEC * SCALE)/ NSEC_PER_JIFFIE)) / SCALE;
215 * Then we make SCALE a power of two so:
216 * jiff = ((sec) * ((NSEC_PER_SEC << SCALE)/ NSEC_PER_JIFFIE)) >> SCALE;
217 * Now we define:
218 * #define SEC_CONV = ((NSEC_PER_SEC << SCALE)/ NSEC_PER_JIFFIE))
219 * jiff = (sec * SEC_CONV) >> SCALE;
220 *
221 * Often the math we use will expand beyond 32-bits so we tell C how to
222 * do this and pass the 64-bit result of the mpy through the ">> SCALE"
223 * which should take the result back to 32-bits. We want this expansion
224 * to capture as much precision as possible. At the same time we don't
225 * want to overflow so we pick the SCALE to avoid this. In this file,
226 * that means using a different scale for each range of HZ values (as
227 * defined in timex.h).
228 *
229 * For those who want to know, gcc will give a 64-bit result from a "*"
230 * operator if the result is a long long AND at least one of the
231 * operands is cast to long long (usually just prior to the "*" so as
232 * not to confuse it into thinking it really has a 64-bit operand,
233 * which, buy the way, it can do, but it takes more code and at least 2
234 * mpys).
235
236 * We also need to be aware that one second in nanoseconds is only a
237 * couple of bits away from overflowing a 32-bit word, so we MUST use
238 * 64-bits to get the full range time in nanoseconds.
239
240 */
241
242 /*
243 * Here are the scales we will use. One for seconds, nanoseconds and
244 * microseconds.
245 *
246 * Within the limits of cpp we do a rough cut at the SEC_JIFFIE_SC and
247 * check if the sign bit is set. If not, we bump the shift count by 1.
248 * (Gets an extra bit of precision where we can use it.)
249 * We know it is set for HZ = 1024 and HZ = 100 not for 1000.
250 * Haven't tested others.
251
252 * Limits of cpp (for #if expressions) only long (no long long), but
253 * then we only need the most signicant bit.
254 */
255
256 #define SEC_JIFFIE_SC (31 - SHIFT_HZ)
257 #if !((((NSEC_PER_SEC << 2) / TICK_NSEC) << (SEC_JIFFIE_SC - 2)) & 0x80000000)
258 #undef SEC_JIFFIE_SC
259 #define SEC_JIFFIE_SC (32 - SHIFT_HZ)
260 #endif
261 #define NSEC_JIFFIE_SC (SEC_JIFFIE_SC + 29)
262 #define USEC_JIFFIE_SC (SEC_JIFFIE_SC + 19)
263 #define SEC_CONVERSION ((unsigned long)((((u64)NSEC_PER_SEC << SEC_JIFFIE_SC) +\
264 TICK_NSEC -1) / (u64)TICK_NSEC))
265
266 #define NSEC_CONVERSION ((unsigned long)((((u64)1 << NSEC_JIFFIE_SC) +\
267 TICK_NSEC -1) / (u64)TICK_NSEC))
268 #define USEC_CONVERSION \
269 ((unsigned long)((((u64)NSEC_PER_USEC << USEC_JIFFIE_SC) +\
270 TICK_NSEC -1) / (u64)TICK_NSEC))
271 /*
272 * USEC_ROUND is used in the timeval to jiffie conversion. See there
273 * for more details. It is the scaled resolution rounding value. Note
274 * that it is a 64-bit value. Since, when it is applied, we are already
275 * in jiffies (albit scaled), it is nothing but the bits we will shift
276 * off.
277 */
278 #define USEC_ROUND (u64)(((u64)1 << USEC_JIFFIE_SC) - 1)
279 /*
280 * The maximum jiffie value is (MAX_INT >> 1). Here we translate that
281 * into seconds. The 64-bit case will overflow if we are not careful,
282 * so use the messy SH_DIV macro to do it. Still all constants.
283 */
284 #if BITS_PER_LONG < 64
285 # define MAX_SEC_IN_JIFFIES \
286 (long)((u64)((u64)MAX_JIFFY_OFFSET * TICK_NSEC) / NSEC_PER_SEC)
287 #else /* take care of overflow on 64 bits machines */
288 # define MAX_SEC_IN_JIFFIES \
289 (SH_DIV((MAX_JIFFY_OFFSET >> SEC_JIFFIE_SC) * TICK_NSEC, NSEC_PER_SEC, 1) - 1)
290
291 #endif
292
293 /*
294 * Convert various time units to each other:
295 */
296 extern unsigned int jiffies_to_msecs(const unsigned long j);
297 extern unsigned int jiffies_to_usecs(const unsigned long j);
298 extern unsigned long msecs_to_jiffies(const unsigned int m);
299 extern unsigned long usecs_to_jiffies(const unsigned int u);
300 extern unsigned long timespec_to_jiffies(const struct timespec *value);
301 extern void jiffies_to_timespec(const unsigned long jiffies,
302 struct timespec *value);
303 extern unsigned long timeval_to_jiffies(const struct timeval *value);
304 extern void jiffies_to_timeval(const unsigned long jiffies,
305 struct timeval *value);
306 extern clock_t jiffies_to_clock_t(unsigned long x);
307 extern unsigned long clock_t_to_jiffies(unsigned long x);
308 extern u64 jiffies_64_to_clock_t(u64 x);
309 extern u64 nsec_to_clock_t(u64 x);
310 extern u64 nsecs_to_jiffies64(u64 n);
311 extern unsigned long nsecs_to_jiffies(u64 n);
312
313 #define TIMESTAMP_SIZE 30
314
315 #endif
316