1 /* 2 * Copyright (c) 2000-2008 LSI Corporation. 3 * 4 * 5 * Name: mpi_cnfg.h 6 * Title: MPI Config message, structures, and Pages 7 * Creation Date: July 27, 2000 8 * 9 * mpi_cnfg.h Version: 01.05.18 10 * 11 * Version History 12 * --------------- 13 * 14 * Date Version Description 15 * -------- -------- ------------------------------------------------------ 16 * 05-08-00 00.10.01 Original release for 0.10 spec dated 4/26/2000. 17 * 06-06-00 01.00.01 Update version number for 1.0 release. 18 * 06-08-00 01.00.02 Added _PAGEVERSION definitions for all pages. 19 * Added FcPhLowestVersion, FcPhHighestVersion, Reserved2 20 * fields to FC_DEVICE_0 page, updated the page version. 21 * Changed _FREE_RUNNING_CLOCK to _PACING_TRANSFERS in 22 * SCSI_PORT_0, SCSI_DEVICE_0 and SCSI_DEVICE_1 pages 23 * and updated the page versions. 24 * Added _RESPONSE_ID_MASK definition to SCSI_PORT_1 25 * page and updated the page version. 26 * Added Information field and _INFO_PARAMS_NEGOTIATED 27 * definitionto SCSI_DEVICE_0 page. 28 * 06-22-00 01.00.03 Removed batch controls from LAN_0 page and updated the 29 * page version. 30 * Added BucketsRemaining to LAN_1 page, redefined the 31 * state values, and updated the page version. 32 * Revised bus width definitions in SCSI_PORT_0, 33 * SCSI_DEVICE_0 and SCSI_DEVICE_1 pages. 34 * 06-30-00 01.00.04 Added MaxReplySize to LAN_1 page and updated the page 35 * version. 36 * Moved FC_DEVICE_0 PageAddress description to spec. 37 * 07-27-00 01.00.05 Corrected the SubsystemVendorID and SubsystemID field 38 * widths in IOC_0 page and updated the page version. 39 * 11-02-00 01.01.01 Original release for post 1.0 work 40 * Added Manufacturing pages, IO Unit Page 2, SCSI SPI 41 * Port Page 2, FC Port Page 4, FC Port Page 5 42 * 11-15-00 01.01.02 Interim changes to match proposals 43 * 12-04-00 01.01.03 Config page changes to match MPI rev 1.00.01. 44 * 12-05-00 01.01.04 Modified config page actions. 45 * 01-09-01 01.01.05 Added defines for page address formats. 46 * Data size for Manufacturing pages 2 and 3 no longer 47 * defined here. 48 * Io Unit Page 2 size is fixed at 4 adapters and some 49 * flags were changed. 50 * SCSI Port Page 2 Device Settings modified. 51 * New fields added to FC Port Page 0 and some flags 52 * cleaned up. 53 * Removed impedance flash from FC Port Page 1. 54 * Added FC Port pages 6 and 7. 55 * 01-25-01 01.01.06 Added MaxInitiators field to FcPortPage0. 56 * 01-29-01 01.01.07 Changed some defines to make them 32 character unique. 57 * Added some LinkType defines for FcPortPage0. 58 * 02-20-01 01.01.08 Started using MPI_POINTER. 59 * 02-27-01 01.01.09 Replaced MPI_CONFIG_PAGETYPE_SCSI_LUN with 60 * MPI_CONFIG_PAGETYPE_RAID_VOLUME. 61 * Added definitions and structures for IOC Page 2 and 62 * RAID Volume Page 2. 63 * 03-27-01 01.01.10 Added CONFIG_PAGE_FC_PORT_8 and CONFIG_PAGE_FC_PORT_9. 64 * CONFIG_PAGE_FC_PORT_3 now supports persistent by DID. 65 * Added VendorId and ProductRevLevel fields to 66 * RAIDVOL2_IM_PHYS_ID struct. 67 * Modified values for MPI_FCPORTPAGE0_FLAGS_ATTACH_ 68 * defines to make them compatible to MPI version 1.0. 69 * Added structure offset comments. 70 * 04-09-01 01.01.11 Added some new defines for the PageAddress field and 71 * removed some obsolete ones. 72 * Added IO Unit Page 3. 73 * Modified defines for Scsi Port Page 2. 74 * Modified RAID Volume Pages. 75 * 08-08-01 01.02.01 Original release for v1.2 work. 76 * Added SepID and SepBus to RVP2 IMPhysicalDisk struct. 77 * Added defines for the SEP bits in RVP2 VolumeSettings. 78 * Modified the DeviceSettings field in RVP2 to use the 79 * proper structure. 80 * Added defines for SES, SAF-TE, and cross channel for 81 * IOCPage2 CapabilitiesFlags. 82 * Removed define for MPI_IOUNITPAGE2_FLAGS_RAID_DISABLE. 83 * Removed define for 84 * MPI_SCSIPORTPAGE2_PORT_FLAGS_PARITY_ENABLE. 85 * Added define for MPI_CONFIG_PAGEATTR_RO_PERSISTENT. 86 * 08-29-01 01.02.02 Fixed value for MPI_MANUFACTPAGE_DEVID_53C1035. 87 * Added defines for MPI_FCPORTPAGE1_FLAGS_HARD_ALPA_ONLY 88 * and MPI_FCPORTPAGE1_FLAGS_IMMEDIATE_ERROR_REPLY. 89 * Removed MPI_SCSIPORTPAGE0_CAP_PACING_TRANSFERS, 90 * MPI_SCSIDEVPAGE0_NP_PACING_TRANSFERS, and 91 * MPI_SCSIDEVPAGE1_RP_PACING_TRANSFERS, and 92 * MPI_SCSIDEVPAGE1_CONF_PPR_ALLOWED. 93 * Added defines for MPI_SCSIDEVPAGE1_CONF_WDTR_DISALLOWED 94 * and MPI_SCSIDEVPAGE1_CONF_SDTR_DISALLOWED. 95 * Added OnBusTimerValue to CONFIG_PAGE_SCSI_PORT_1. 96 * Added rejected bits to SCSI Device Page 0 Information. 97 * Increased size of ALPA array in FC Port Page 2 by one 98 * and removed a one byte reserved field. 99 * 09-28-01 01.02.03 Swapped NegWireSpeedLow and NegWireSpeedLow in 100 * CONFIG_PAGE_LAN_1 to match preferred 64-bit ordering. 101 * Added structures for Manufacturing Page 4, IO Unit 102 * Page 3, IOC Page 3, IOC Page 4, RAID Volume Page 0, and 103 * RAID PhysDisk Page 0. 104 * 10-04-01 01.02.04 Added define for MPI_CONFIG_PAGETYPE_RAID_PHYSDISK. 105 * Modified some of the new defines to make them 32 106 * character unique. 107 * Modified how variable length pages (arrays) are defined. 108 * Added generic defines for hot spare pools and RAID 109 * volume types. 110 * 11-01-01 01.02.05 Added define for MPI_IOUNITPAGE1_DISABLE_IR. 111 * 03-14-02 01.02.06 Added PCISlotNum field to CONFIG_PAGE_IOC_1 along with 112 * related define, and bumped the page version define. 113 * 05-31-02 01.02.07 Added a Flags field to CONFIG_PAGE_IOC_2_RAID_VOL in a 114 * reserved byte and added a define. 115 * Added define for 116 * MPI_RAIDVOL0_STATUS_FLAG_VOLUME_INACTIVE. 117 * Added new config page: CONFIG_PAGE_IOC_5. 118 * Added MaxAliases, MaxHardAliases, and NumCurrentAliases 119 * fields to CONFIG_PAGE_FC_PORT_0. 120 * Added AltConnector and NumRequestedAliases fields to 121 * CONFIG_PAGE_FC_PORT_1. 122 * Added new config page: CONFIG_PAGE_FC_PORT_10. 123 * 07-12-02 01.02.08 Added more MPI_MANUFACTPAGE_DEVID_ defines. 124 * Added additional MPI_SCSIDEVPAGE0_NP_ defines. 125 * Added more MPI_SCSIDEVPAGE1_RP_ defines. 126 * Added define for 127 * MPI_SCSIDEVPAGE1_CONF_EXTENDED_PARAMS_ENABLE. 128 * Added new config page: CONFIG_PAGE_SCSI_DEVICE_3. 129 * Modified MPI_FCPORTPAGE5_FLAGS_ defines. 130 * 09-16-02 01.02.09 Added MPI_SCSIDEVPAGE1_CONF_FORCE_PPR_MSG define. 131 * 11-15-02 01.02.10 Added ConnectedID defines for CONFIG_PAGE_SCSI_PORT_0. 132 * Added more Flags defines for CONFIG_PAGE_FC_PORT_1. 133 * Added more Flags defines for CONFIG_PAGE_FC_DEVICE_0. 134 * 04-01-03 01.02.11 Added RR_TOV field and additional Flags defines for 135 * CONFIG_PAGE_FC_PORT_1. 136 * Added define MPI_FCPORTPAGE5_FLAGS_DISABLE to disable 137 * an alias. 138 * Added more device id defines. 139 * 06-26-03 01.02.12 Added MPI_IOUNITPAGE1_IR_USE_STATIC_VOLUME_ID define. 140 * Added TargetConfig and IDConfig fields to 141 * CONFIG_PAGE_SCSI_PORT_1. 142 * Added more PortFlags defines for CONFIG_PAGE_SCSI_PORT_2 143 * to control DV. 144 * Added more Flags defines for CONFIG_PAGE_FC_PORT_1. 145 * In CONFIG_PAGE_FC_DEVICE_0, replaced Reserved1 field 146 * with ADISCHardALPA. 147 * Added MPI_FC_DEVICE_PAGE0_PROT_FCP_RETRY define. 148 * 01-16-04 01.02.13 Added InitiatorDeviceTimeout and InitiatorIoPendTimeout 149 * fields and related defines to CONFIG_PAGE_FC_PORT_1. 150 * Added define for 151 * MPI_FCPORTPAGE1_FLAGS_SOFT_ALPA_FALLBACK. 152 * Added new fields to the substructures of 153 * CONFIG_PAGE_FC_PORT_10. 154 * 04-29-04 01.02.14 Added define for IDP bit for CONFIG_PAGE_SCSI_PORT_0, 155 * CONFIG_PAGE_SCSI_DEVICE_0, and 156 * CONFIG_PAGE_SCSI_DEVICE_1. Also bumped Page Version for 157 * these pages. 158 * 05-11-04 01.03.01 Added structure for CONFIG_PAGE_INBAND_0. 159 * 08-19-04 01.05.01 Modified MSG_CONFIG request to support extended config 160 * pages. 161 * Added a new structure for extended config page header. 162 * Added new extended config pages types and structures for 163 * SAS IO Unit, SAS Expander, SAS Device, and SAS PHY. 164 * Replaced a reserved byte in CONFIG_PAGE_MANUFACTURING_4 165 * to add a Flags field. 166 * Two new Manufacturing config pages (5 and 6). 167 * Two new bits defined for IO Unit Page 1 Flags field. 168 * Modified CONFIG_PAGE_IO_UNIT_2 to add three new fields 169 * to specify the BIOS boot device. 170 * Four new Flags bits defined for IO Unit Page 2. 171 * Added IO Unit Page 4. 172 * Added EEDP Flags settings to IOC Page 1. 173 * Added new BIOS Page 1 config page. 174 * 10-05-04 01.05.02 Added define for 175 * MPI_IOCPAGE1_INITIATOR_CONTEXT_REPLY_DISABLE. 176 * Added new Flags field to CONFIG_PAGE_MANUFACTURING_5 and 177 * associated defines. 178 * Added more defines for SAS IO Unit Page 0 179 * DiscoveryStatus field. 180 * Added define for MPI_SAS_IOUNIT0_DS_SUBTRACTIVE_LINK 181 * and MPI_SAS_IOUNIT0_DS_TABLE_LINK. 182 * Added defines for Physical Mapping Modes to SAS IO Unit 183 * Page 2. 184 * Added define for 185 * MPI_SAS_DEVICE0_FLAGS_PORT_SELECTOR_ATTACH. 186 * 10-27-04 01.05.03 Added defines for new SAS PHY page addressing mode. 187 * Added defines for MaxTargetSpinUp to BIOS Page 1. 188 * Added 5 new ControlFlags defines for SAS IO Unit 189 * Page 1. 190 * Added MaxNumPhysicalMappedIDs field to SAS IO Unit 191 * Page 2. 192 * Added AccessStatus field to SAS Device Page 0 and added 193 * new Flags bits for supported SATA features. 194 * 12-07-04 01.05.04 Added config page structures for BIOS Page 2, RAID 195 * Volume Page 1, and RAID Physical Disk Page 1. 196 * Replaced IO Unit Page 1 BootTargetID,BootBus, and 197 * BootAdapterNum with reserved field. 198 * Added DataScrubRate and ResyncRate to RAID Volume 199 * Page 0. 200 * Added MPI_SAS_IOUNIT2_FLAGS_RESERVE_ID_0_FOR_BOOT 201 * define. 202 * 12-09-04 01.05.05 Added Target Mode Large CDB Enable to FC Port Page 1 203 * Flags field. 204 * Added Auto Port Config flag define for SAS IOUNIT 205 * Page 1 ControlFlags. 206 * Added Disabled bad Phy define to Expander Page 1 207 * Discovery Info field. 208 * Added SAS/SATA device support to SAS IOUnit Page 1 209 * ControlFlags. 210 * Added Unsupported device to SAS Dev Page 0 Flags field 211 * Added disable use SATA Hash Address for SAS IOUNIT 212 * page 1 in ControlFields. 213 * 01-15-05 01.05.06 Added defaults for data scrub rate and resync rate to 214 * Manufacturing Page 4. 215 * Added new defines for BIOS Page 1 IOCSettings field. 216 * Added ExtDiskIdentifier field to RAID Physical Disk 217 * Page 0. 218 * Added new defines for SAS IO Unit Page 1 ControlFlags 219 * and to SAS Device Page 0 Flags to control SATA devices. 220 * Added defines and structures for the new Log Page 0, a 221 * new type of configuration page. 222 * 02-09-05 01.05.07 Added InactiveStatus field to RAID Volume Page 0. 223 * Added WWID field to RAID Volume Page 1. 224 * Added PhysicalPort field to SAS Expander pages 0 and 1. 225 * 03-11-05 01.05.08 Removed the EEDP flags from IOC Page 1. 226 * Added Enclosure/Slot boot device format to BIOS Page 2. 227 * New status value for RAID Volume Page 0 VolumeStatus 228 * (VolumeState subfield). 229 * New value for RAID Physical Page 0 InactiveStatus. 230 * Added Inactive Volume Member flag RAID Physical Disk 231 * Page 0 PhysDiskStatus field. 232 * New physical mapping mode in SAS IO Unit Page 2. 233 * Added CONFIG_PAGE_SAS_ENCLOSURE_0. 234 * Added Slot and Enclosure fields to SAS Device Page 0. 235 * 06-24-05 01.05.09 Added EEDP defines to IOC Page 1. 236 * Added more RAID type defines to IOC Page 2. 237 * Added Port Enable Delay settings to BIOS Page 1. 238 * Added Bad Block Table Full define to RAID Volume Page 0. 239 * Added Previous State defines to RAID Physical Disk 240 * Page 0. 241 * Added Max Sata Targets define for DiscoveryStatus field 242 * of SAS IO Unit Page 0. 243 * Added Device Self Test to Control Flags of SAS IO Unit 244 * Page 1. 245 * Added Direct Attach Starting Slot Number define for SAS 246 * IO Unit Page 2. 247 * Added new fields in SAS Device Page 2 for enclosure 248 * mapping. 249 * Added OwnerDevHandle and Flags field to SAS PHY Page 0. 250 * Added IOC GPIO Flags define to SAS Enclosure Page 0. 251 * Fixed the value for MPI_SAS_IOUNIT1_CONTROL_DEV_SATA_SUPPORT. 252 * 08-03-05 01.05.10 Removed ISDataScrubRate and ISResyncRate from 253 * Manufacturing Page 4. 254 * Added MPI_IOUNITPAGE1_SATA_WRITE_CACHE_DISABLE bit. 255 * Added NumDevsPerEnclosure field to SAS IO Unit page 2. 256 * Added MPI_SAS_IOUNIT2_FLAGS_HOST_ASSIGNED_PHYS_MAP 257 * define. 258 * Added EnclosureHandle field to SAS Expander page 0. 259 * Removed redundant NumTableEntriesProg field from SAS 260 * Expander Page 1. 261 * 08-30-05 01.05.11 Added DeviceID for FC949E and changed the DeviceID for 262 * SAS1078. 263 * Added more defines for Manufacturing Page 4 Flags field. 264 * Added more defines for IOCSettings and added 265 * ExpanderSpinup field to Bios Page 1. 266 * Added postpone SATA Init bit to SAS IO Unit Page 1 267 * ControlFlags. 268 * Changed LogEntry format for Log Page 0. 269 * 03-27-06 01.05.12 Added two new Flags defines for Manufacturing Page 4. 270 * Added Manufacturing Page 7. 271 * Added MPI_IOCPAGE2_CAP_FLAGS_RAID_64_BIT_ADDRESSING. 272 * Added IOC Page 6. 273 * Added PrevBootDeviceForm field to CONFIG_PAGE_BIOS_2. 274 * Added MaxLBAHigh field to RAID Volume Page 0. 275 * Added Nvdata version fields to SAS IO Unit Page 0. 276 * Added AdditionalControlFlags, MaxTargetPortConnectTime, 277 * ReportDeviceMissingDelay, and IODeviceMissingDelay 278 * fields to SAS IO Unit Page 1. 279 * 10-11-06 01.05.13 Added NumForceWWID field and ForceWWID array to 280 * Manufacturing Page 5. 281 * Added Manufacturing pages 8 through 10. 282 * Added defines for supported metadata size bits in 283 * CapabilitiesFlags field of IOC Page 6. 284 * Added defines for metadata size bits in VolumeSettings 285 * field of RAID Volume Page 0. 286 * Added SATA Link Reset settings, Enable SATA Asynchronous 287 * Notification bit, and HideNonZeroAttachedPhyIdentifiers 288 * bit to AdditionalControlFlags field of SAS IO Unit 289 * Page 1. 290 * Added defines for Enclosure Devices Unmapped and 291 * Device Limit Exceeded bits in Status field of SAS IO 292 * Unit Page 2. 293 * Added more AccessStatus values for SAS Device Page 0. 294 * Added bit for SATA Asynchronous Notification Support in 295 * Flags field of SAS Device Page 0. 296 * 02-28-07 01.05.14 Added ExtFlags field to Manufacturing Page 4. 297 * Added Disable SMART Polling for CapabilitiesFlags of 298 * IOC Page 6. 299 * Added Disable SMART Polling to DeviceSettings of BIOS 300 * Page 1. 301 * Added Multi-Port Domain bit for DiscoveryStatus field 302 * of SAS IO Unit Page. 303 * Added Multi-Port Domain Illegal flag for SAS IO Unit 304 * Page 1 AdditionalControlFlags field. 305 * 05-24-07 01.05.15 Added Hide Physical Disks with Non-Integrated RAID 306 * Metadata bit to Manufacturing Page 4 ExtFlags field. 307 * Added Internal Connector to End Device Present bit to 308 * Expander Page 0 Flags field. 309 * Fixed define for 310 * MPI_SAS_EXPANDER1_DISCINFO_BAD_PHY_DISABLED. 311 * 08-07-07 01.05.16 Added MPI_IOCPAGE6_CAP_FLAGS_MULTIPORT_DRIVE_SUPPORT 312 * define. 313 * Added BIOS Page 4 structure. 314 * Added MPI_RAID_PHYS_DISK1_PATH_MAX define for RAID 315 * Physcial Disk Page 1. 316 * 01-15-07 01.05.17 Added additional bit defines for ExtFlags field of 317 * Manufacturing Page 4. 318 * Added Solid State Drives Supported bit to IOC Page 6 319 * Capabilities Flags. 320 * Added new value for AccessStatus field of SAS Device 321 * Page 0 (_SATA_NEEDS_INITIALIZATION). 322 * 03-28-08 01.05.18 Defined new bits in Manufacturing Page 4 ExtFlags field 323 * to control coercion size and the mixing of SAS and SATA 324 * SSD drives. 325 * -------------------------------------------------------------------------- 326 */ 327 328 #ifndef MPI_CNFG_H 329 #define MPI_CNFG_H 330 331 332 /***************************************************************************** 333 * 334 * C o n f i g M e s s a g e a n d S t r u c t u r e s 335 * 336 *****************************************************************************/ 337 338 typedef struct _CONFIG_PAGE_HEADER 339 { 340 U8 PageVersion; /* 00h */ 341 U8 PageLength; /* 01h */ 342 U8 PageNumber; /* 02h */ 343 U8 PageType; /* 03h */ 344 } CONFIG_PAGE_HEADER, MPI_POINTER PTR_CONFIG_PAGE_HEADER, 345 ConfigPageHeader_t, MPI_POINTER pConfigPageHeader_t; 346 347 typedef union _CONFIG_PAGE_HEADER_UNION 348 { 349 ConfigPageHeader_t Struct; 350 U8 Bytes[4]; 351 U16 Word16[2]; 352 U32 Word32; 353 } ConfigPageHeaderUnion, MPI_POINTER pConfigPageHeaderUnion, 354 CONFIG_PAGE_HEADER_UNION, MPI_POINTER PTR_CONFIG_PAGE_HEADER_UNION; 355 356 typedef struct _CONFIG_EXTENDED_PAGE_HEADER 357 { 358 U8 PageVersion; /* 00h */ 359 U8 Reserved1; /* 01h */ 360 U8 PageNumber; /* 02h */ 361 U8 PageType; /* 03h */ 362 U16 ExtPageLength; /* 04h */ 363 U8 ExtPageType; /* 06h */ 364 U8 Reserved2; /* 07h */ 365 } CONFIG_EXTENDED_PAGE_HEADER, MPI_POINTER PTR_CONFIG_EXTENDED_PAGE_HEADER, 366 ConfigExtendedPageHeader_t, MPI_POINTER pConfigExtendedPageHeader_t; 367 368 369 370 /**************************************************************************** 371 * PageType field values 372 ****************************************************************************/ 373 #define MPI_CONFIG_PAGEATTR_READ_ONLY (0x00) 374 #define MPI_CONFIG_PAGEATTR_CHANGEABLE (0x10) 375 #define MPI_CONFIG_PAGEATTR_PERSISTENT (0x20) 376 #define MPI_CONFIG_PAGEATTR_RO_PERSISTENT (0x30) 377 #define MPI_CONFIG_PAGEATTR_MASK (0xF0) 378 379 #define MPI_CONFIG_PAGETYPE_IO_UNIT (0x00) 380 #define MPI_CONFIG_PAGETYPE_IOC (0x01) 381 #define MPI_CONFIG_PAGETYPE_BIOS (0x02) 382 #define MPI_CONFIG_PAGETYPE_SCSI_PORT (0x03) 383 #define MPI_CONFIG_PAGETYPE_SCSI_DEVICE (0x04) 384 #define MPI_CONFIG_PAGETYPE_FC_PORT (0x05) 385 #define MPI_CONFIG_PAGETYPE_FC_DEVICE (0x06) 386 #define MPI_CONFIG_PAGETYPE_LAN (0x07) 387 #define MPI_CONFIG_PAGETYPE_RAID_VOLUME (0x08) 388 #define MPI_CONFIG_PAGETYPE_MANUFACTURING (0x09) 389 #define MPI_CONFIG_PAGETYPE_RAID_PHYSDISK (0x0A) 390 #define MPI_CONFIG_PAGETYPE_INBAND (0x0B) 391 #define MPI_CONFIG_PAGETYPE_EXTENDED (0x0F) 392 #define MPI_CONFIG_PAGETYPE_MASK (0x0F) 393 394 #define MPI_CONFIG_TYPENUM_MASK (0x0FFF) 395 396 397 /**************************************************************************** 398 * ExtPageType field values 399 ****************************************************************************/ 400 #define MPI_CONFIG_EXTPAGETYPE_SAS_IO_UNIT (0x10) 401 #define MPI_CONFIG_EXTPAGETYPE_SAS_EXPANDER (0x11) 402 #define MPI_CONFIG_EXTPAGETYPE_SAS_DEVICE (0x12) 403 #define MPI_CONFIG_EXTPAGETYPE_SAS_PHY (0x13) 404 #define MPI_CONFIG_EXTPAGETYPE_LOG (0x14) 405 #define MPI_CONFIG_EXTPAGETYPE_ENCLOSURE (0x15) 406 407 408 /**************************************************************************** 409 * PageAddress field values 410 ****************************************************************************/ 411 #define MPI_SCSI_PORT_PGAD_PORT_MASK (0x000000FF) 412 413 #define MPI_SCSI_DEVICE_FORM_MASK (0xF0000000) 414 #define MPI_SCSI_DEVICE_FORM_BUS_TID (0x00000000) 415 #define MPI_SCSI_DEVICE_TARGET_ID_MASK (0x000000FF) 416 #define MPI_SCSI_DEVICE_TARGET_ID_SHIFT (0) 417 #define MPI_SCSI_DEVICE_BUS_MASK (0x0000FF00) 418 #define MPI_SCSI_DEVICE_BUS_SHIFT (8) 419 #define MPI_SCSI_DEVICE_FORM_TARGET_MODE (0x10000000) 420 #define MPI_SCSI_DEVICE_TM_RESPOND_ID_MASK (0x000000FF) 421 #define MPI_SCSI_DEVICE_TM_RESPOND_ID_SHIFT (0) 422 #define MPI_SCSI_DEVICE_TM_BUS_MASK (0x0000FF00) 423 #define MPI_SCSI_DEVICE_TM_BUS_SHIFT (8) 424 #define MPI_SCSI_DEVICE_TM_INIT_ID_MASK (0x00FF0000) 425 #define MPI_SCSI_DEVICE_TM_INIT_ID_SHIFT (16) 426 427 #define MPI_FC_PORT_PGAD_PORT_MASK (0xF0000000) 428 #define MPI_FC_PORT_PGAD_PORT_SHIFT (28) 429 #define MPI_FC_PORT_PGAD_FORM_MASK (0x0F000000) 430 #define MPI_FC_PORT_PGAD_FORM_INDEX (0x01000000) 431 #define MPI_FC_PORT_PGAD_INDEX_MASK (0x0000FFFF) 432 #define MPI_FC_PORT_PGAD_INDEX_SHIFT (0) 433 434 #define MPI_FC_DEVICE_PGAD_PORT_MASK (0xF0000000) 435 #define MPI_FC_DEVICE_PGAD_PORT_SHIFT (28) 436 #define MPI_FC_DEVICE_PGAD_FORM_MASK (0x0F000000) 437 #define MPI_FC_DEVICE_PGAD_FORM_NEXT_DID (0x00000000) 438 #define MPI_FC_DEVICE_PGAD_ND_PORT_MASK (0xF0000000) 439 #define MPI_FC_DEVICE_PGAD_ND_PORT_SHIFT (28) 440 #define MPI_FC_DEVICE_PGAD_ND_DID_MASK (0x00FFFFFF) 441 #define MPI_FC_DEVICE_PGAD_ND_DID_SHIFT (0) 442 #define MPI_FC_DEVICE_PGAD_FORM_BUS_TID (0x01000000) 443 #define MPI_FC_DEVICE_PGAD_BT_BUS_MASK (0x0000FF00) 444 #define MPI_FC_DEVICE_PGAD_BT_BUS_SHIFT (8) 445 #define MPI_FC_DEVICE_PGAD_BT_TID_MASK (0x000000FF) 446 #define MPI_FC_DEVICE_PGAD_BT_TID_SHIFT (0) 447 448 #define MPI_PHYSDISK_PGAD_PHYSDISKNUM_MASK (0x000000FF) 449 #define MPI_PHYSDISK_PGAD_PHYSDISKNUM_SHIFT (0) 450 451 #define MPI_SAS_EXPAND_PGAD_FORM_MASK (0xF0000000) 452 #define MPI_SAS_EXPAND_PGAD_FORM_SHIFT (28) 453 #define MPI_SAS_EXPAND_PGAD_FORM_GET_NEXT_HANDLE (0x00000000) 454 #define MPI_SAS_EXPAND_PGAD_FORM_HANDLE_PHY_NUM (0x00000001) 455 #define MPI_SAS_EXPAND_PGAD_FORM_HANDLE (0x00000002) 456 #define MPI_SAS_EXPAND_PGAD_GNH_MASK_HANDLE (0x0000FFFF) 457 #define MPI_SAS_EXPAND_PGAD_GNH_SHIFT_HANDLE (0) 458 #define MPI_SAS_EXPAND_PGAD_HPN_MASK_PHY (0x00FF0000) 459 #define MPI_SAS_EXPAND_PGAD_HPN_SHIFT_PHY (16) 460 #define MPI_SAS_EXPAND_PGAD_HPN_MASK_HANDLE (0x0000FFFF) 461 #define MPI_SAS_EXPAND_PGAD_HPN_SHIFT_HANDLE (0) 462 #define MPI_SAS_EXPAND_PGAD_H_MASK_HANDLE (0x0000FFFF) 463 #define MPI_SAS_EXPAND_PGAD_H_SHIFT_HANDLE (0) 464 465 #define MPI_SAS_DEVICE_PGAD_FORM_MASK (0xF0000000) 466 #define MPI_SAS_DEVICE_PGAD_FORM_SHIFT (28) 467 #define MPI_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE (0x00000000) 468 #define MPI_SAS_DEVICE_PGAD_FORM_BUS_TARGET_ID (0x00000001) 469 #define MPI_SAS_DEVICE_PGAD_FORM_HANDLE (0x00000002) 470 #define MPI_SAS_DEVICE_PGAD_GNH_HANDLE_MASK (0x0000FFFF) 471 #define MPI_SAS_DEVICE_PGAD_GNH_HANDLE_SHIFT (0) 472 #define MPI_SAS_DEVICE_PGAD_BT_BUS_MASK (0x0000FF00) 473 #define MPI_SAS_DEVICE_PGAD_BT_BUS_SHIFT (8) 474 #define MPI_SAS_DEVICE_PGAD_BT_TID_MASK (0x000000FF) 475 #define MPI_SAS_DEVICE_PGAD_BT_TID_SHIFT (0) 476 #define MPI_SAS_DEVICE_PGAD_H_HANDLE_MASK (0x0000FFFF) 477 #define MPI_SAS_DEVICE_PGAD_H_HANDLE_SHIFT (0) 478 479 #define MPI_SAS_PHY_PGAD_FORM_MASK (0xF0000000) 480 #define MPI_SAS_PHY_PGAD_FORM_SHIFT (28) 481 #define MPI_SAS_PHY_PGAD_FORM_PHY_NUMBER (0x0) 482 #define MPI_SAS_PHY_PGAD_FORM_PHY_TBL_INDEX (0x1) 483 #define MPI_SAS_PHY_PGAD_PHY_NUMBER_MASK (0x000000FF) 484 #define MPI_SAS_PHY_PGAD_PHY_NUMBER_SHIFT (0) 485 #define MPI_SAS_PHY_PGAD_PHY_TBL_INDEX_MASK (0x0000FFFF) 486 #define MPI_SAS_PHY_PGAD_PHY_TBL_INDEX_SHIFT (0) 487 488 #define MPI_SAS_ENCLOS_PGAD_FORM_MASK (0xF0000000) 489 #define MPI_SAS_ENCLOS_PGAD_FORM_SHIFT (28) 490 #define MPI_SAS_ENCLOS_PGAD_FORM_GET_NEXT_HANDLE (0x00000000) 491 #define MPI_SAS_ENCLOS_PGAD_FORM_HANDLE (0x00000001) 492 #define MPI_SAS_ENCLOS_PGAD_GNH_HANDLE_MASK (0x0000FFFF) 493 #define MPI_SAS_ENCLOS_PGAD_GNH_HANDLE_SHIFT (0) 494 #define MPI_SAS_ENCLOS_PGAD_H_HANDLE_MASK (0x0000FFFF) 495 #define MPI_SAS_ENCLOS_PGAD_H_HANDLE_SHIFT (0) 496 497 498 499 /**************************************************************************** 500 * Config Request Message 501 ****************************************************************************/ 502 typedef struct _MSG_CONFIG 503 { 504 U8 Action; /* 00h */ 505 U8 Reserved; /* 01h */ 506 U8 ChainOffset; /* 02h */ 507 U8 Function; /* 03h */ 508 U16 ExtPageLength; /* 04h */ 509 U8 ExtPageType; /* 06h */ 510 U8 MsgFlags; /* 07h */ 511 U32 MsgContext; /* 08h */ 512 U8 Reserved2[8]; /* 0Ch */ 513 CONFIG_PAGE_HEADER Header; /* 14h */ 514 U32 PageAddress; /* 18h */ 515 SGE_IO_UNION PageBufferSGE; /* 1Ch */ 516 } MSG_CONFIG, MPI_POINTER PTR_MSG_CONFIG, 517 Config_t, MPI_POINTER pConfig_t; 518 519 520 /**************************************************************************** 521 * Action field values 522 ****************************************************************************/ 523 #define MPI_CONFIG_ACTION_PAGE_HEADER (0x00) 524 #define MPI_CONFIG_ACTION_PAGE_READ_CURRENT (0x01) 525 #define MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT (0x02) 526 #define MPI_CONFIG_ACTION_PAGE_DEFAULT (0x03) 527 #define MPI_CONFIG_ACTION_PAGE_WRITE_NVRAM (0x04) 528 #define MPI_CONFIG_ACTION_PAGE_READ_DEFAULT (0x05) 529 #define MPI_CONFIG_ACTION_PAGE_READ_NVRAM (0x06) 530 531 532 /* Config Reply Message */ 533 typedef struct _MSG_CONFIG_REPLY 534 { 535 U8 Action; /* 00h */ 536 U8 Reserved; /* 01h */ 537 U8 MsgLength; /* 02h */ 538 U8 Function; /* 03h */ 539 U16 ExtPageLength; /* 04h */ 540 U8 ExtPageType; /* 06h */ 541 U8 MsgFlags; /* 07h */ 542 U32 MsgContext; /* 08h */ 543 U8 Reserved2[2]; /* 0Ch */ 544 U16 IOCStatus; /* 0Eh */ 545 U32 IOCLogInfo; /* 10h */ 546 CONFIG_PAGE_HEADER Header; /* 14h */ 547 } MSG_CONFIG_REPLY, MPI_POINTER PTR_MSG_CONFIG_REPLY, 548 ConfigReply_t, MPI_POINTER pConfigReply_t; 549 550 551 552 /***************************************************************************** 553 * 554 * C o n f i g u r a t i o n P a g e s 555 * 556 *****************************************************************************/ 557 558 /**************************************************************************** 559 * Manufacturing Config pages 560 ****************************************************************************/ 561 #define MPI_MANUFACTPAGE_VENDORID_LSILOGIC (0x1000) 562 /* Fibre Channel */ 563 #define MPI_MANUFACTPAGE_DEVICEID_FC909 (0x0621) 564 #define MPI_MANUFACTPAGE_DEVICEID_FC919 (0x0624) 565 #define MPI_MANUFACTPAGE_DEVICEID_FC929 (0x0622) 566 #define MPI_MANUFACTPAGE_DEVICEID_FC919X (0x0628) 567 #define MPI_MANUFACTPAGE_DEVICEID_FC929X (0x0626) 568 #define MPI_MANUFACTPAGE_DEVICEID_FC939X (0x0642) 569 #define MPI_MANUFACTPAGE_DEVICEID_FC949X (0x0640) 570 #define MPI_MANUFACTPAGE_DEVICEID_FC949E (0x0646) 571 /* SCSI */ 572 #define MPI_MANUFACTPAGE_DEVID_53C1030 (0x0030) 573 #define MPI_MANUFACTPAGE_DEVID_53C1030ZC (0x0031) 574 #define MPI_MANUFACTPAGE_DEVID_1030_53C1035 (0x0032) 575 #define MPI_MANUFACTPAGE_DEVID_1030ZC_53C1035 (0x0033) 576 #define MPI_MANUFACTPAGE_DEVID_53C1035 (0x0040) 577 #define MPI_MANUFACTPAGE_DEVID_53C1035ZC (0x0041) 578 /* SAS */ 579 #define MPI_MANUFACTPAGE_DEVID_SAS1064 (0x0050) 580 #define MPI_MANUFACTPAGE_DEVID_SAS1064A (0x005C) 581 #define MPI_MANUFACTPAGE_DEVID_SAS1064E (0x0056) 582 #define MPI_MANUFACTPAGE_DEVID_SAS1066 (0x005E) 583 #define MPI_MANUFACTPAGE_DEVID_SAS1066E (0x005A) 584 #define MPI_MANUFACTPAGE_DEVID_SAS1068 (0x0054) 585 #define MPI_MANUFACTPAGE_DEVID_SAS1068E (0x0058) 586 #define MPI_MANUFACTPAGE_DEVID_SAS1068_820XELP (0x0059) 587 #define MPI_MANUFACTPAGE_DEVID_SAS1078 (0x0062) 588 589 590 typedef struct _CONFIG_PAGE_MANUFACTURING_0 591 { 592 CONFIG_PAGE_HEADER Header; /* 00h */ 593 U8 ChipName[16]; /* 04h */ 594 U8 ChipRevision[8]; /* 14h */ 595 U8 BoardName[16]; /* 1Ch */ 596 U8 BoardAssembly[16]; /* 2Ch */ 597 U8 BoardTracerNumber[16]; /* 3Ch */ 598 599 } CONFIG_PAGE_MANUFACTURING_0, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_0, 600 ManufacturingPage0_t, MPI_POINTER pManufacturingPage0_t; 601 602 #define MPI_MANUFACTURING0_PAGEVERSION (0x00) 603 604 605 typedef struct _CONFIG_PAGE_MANUFACTURING_1 606 { 607 CONFIG_PAGE_HEADER Header; /* 00h */ 608 U8 VPD[256]; /* 04h */ 609 } CONFIG_PAGE_MANUFACTURING_1, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_1, 610 ManufacturingPage1_t, MPI_POINTER pManufacturingPage1_t; 611 612 #define MPI_MANUFACTURING1_PAGEVERSION (0x00) 613 614 615 typedef struct _MPI_CHIP_REVISION_ID 616 { 617 U16 DeviceID; /* 00h */ 618 U8 PCIRevisionID; /* 02h */ 619 U8 Reserved; /* 03h */ 620 } MPI_CHIP_REVISION_ID, MPI_POINTER PTR_MPI_CHIP_REVISION_ID, 621 MpiChipRevisionId_t, MPI_POINTER pMpiChipRevisionId_t; 622 623 624 /* 625 * Host code (drivers, BIOS, utilities, etc.) should leave this define set to 626 * one and check Header.PageLength at runtime. 627 */ 628 #ifndef MPI_MAN_PAGE_2_HW_SETTINGS_WORDS 629 #define MPI_MAN_PAGE_2_HW_SETTINGS_WORDS (1) 630 #endif 631 632 typedef struct _CONFIG_PAGE_MANUFACTURING_2 633 { 634 CONFIG_PAGE_HEADER Header; /* 00h */ 635 MPI_CHIP_REVISION_ID ChipId; /* 04h */ 636 U32 HwSettings[MPI_MAN_PAGE_2_HW_SETTINGS_WORDS];/* 08h */ 637 } CONFIG_PAGE_MANUFACTURING_2, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_2, 638 ManufacturingPage2_t, MPI_POINTER pManufacturingPage2_t; 639 640 #define MPI_MANUFACTURING2_PAGEVERSION (0x00) 641 642 643 /* 644 * Host code (drivers, BIOS, utilities, etc.) should leave this define set to 645 * one and check Header.PageLength at runtime. 646 */ 647 #ifndef MPI_MAN_PAGE_3_INFO_WORDS 648 #define MPI_MAN_PAGE_3_INFO_WORDS (1) 649 #endif 650 651 typedef struct _CONFIG_PAGE_MANUFACTURING_3 652 { 653 CONFIG_PAGE_HEADER Header; /* 00h */ 654 MPI_CHIP_REVISION_ID ChipId; /* 04h */ 655 U32 Info[MPI_MAN_PAGE_3_INFO_WORDS];/* 08h */ 656 } CONFIG_PAGE_MANUFACTURING_3, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_3, 657 ManufacturingPage3_t, MPI_POINTER pManufacturingPage3_t; 658 659 #define MPI_MANUFACTURING3_PAGEVERSION (0x00) 660 661 662 typedef struct _CONFIG_PAGE_MANUFACTURING_4 663 { 664 CONFIG_PAGE_HEADER Header; /* 00h */ 665 U32 Reserved1; /* 04h */ 666 U8 InfoOffset0; /* 08h */ 667 U8 InfoSize0; /* 09h */ 668 U8 InfoOffset1; /* 0Ah */ 669 U8 InfoSize1; /* 0Bh */ 670 U8 InquirySize; /* 0Ch */ 671 U8 Flags; /* 0Dh */ 672 U16 ExtFlags; /* 0Eh */ 673 U8 InquiryData[56]; /* 10h */ 674 U32 ISVolumeSettings; /* 48h */ 675 U32 IMEVolumeSettings; /* 4Ch */ 676 U32 IMVolumeSettings; /* 50h */ 677 U32 Reserved3; /* 54h */ 678 U32 Reserved4; /* 58h */ 679 U32 Reserved5; /* 5Ch */ 680 U8 IMEDataScrubRate; /* 60h */ 681 U8 IMEResyncRate; /* 61h */ 682 U16 Reserved6; /* 62h */ 683 U8 IMDataScrubRate; /* 64h */ 684 U8 IMResyncRate; /* 65h */ 685 U16 Reserved7; /* 66h */ 686 U32 Reserved8; /* 68h */ 687 U32 Reserved9; /* 6Ch */ 688 } CONFIG_PAGE_MANUFACTURING_4, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_4, 689 ManufacturingPage4_t, MPI_POINTER pManufacturingPage4_t; 690 691 #define MPI_MANUFACTURING4_PAGEVERSION (0x05) 692 693 /* defines for the Flags field */ 694 #define MPI_MANPAGE4_FORCE_BAD_BLOCK_TABLE (0x80) 695 #define MPI_MANPAGE4_FORCE_OFFLINE_FAILOVER (0x40) 696 #define MPI_MANPAGE4_IME_DISABLE (0x20) 697 #define MPI_MANPAGE4_IM_DISABLE (0x10) 698 #define MPI_MANPAGE4_IS_DISABLE (0x08) 699 #define MPI_MANPAGE4_IR_MODEPAGE8_DISABLE (0x04) 700 #define MPI_MANPAGE4_IM_RESYNC_CACHE_ENABLE (0x02) 701 #define MPI_MANPAGE4_IR_NO_MIX_SAS_SATA (0x01) 702 703 /* defines for the ExtFlags field */ 704 #define MPI_MANPAGE4_EXTFLAGS_MASK_COERCION_SIZE (0x0180) 705 #define MPI_MANPAGE4_EXTFLAGS_SHIFT_COERCION_SIZE (7) 706 #define MPI_MANPAGE4_EXTFLAGS_1GB_COERCION_SIZE (0) 707 #define MPI_MANPAGE4_EXTFLAGS_128MB_COERCION_SIZE (1) 708 709 #define MPI_MANPAGE4_EXTFLAGS_NO_MIX_SSD_SAS_SATA (0x0040) 710 #define MPI_MANPAGE4_EXTFLAGS_MIX_SSD_AND_NON_SSD (0x0020) 711 #define MPI_MANPAGE4_EXTFLAGS_DUAL_PORT_SUPPORT (0x0010) 712 #define MPI_MANPAGE4_EXTFLAGS_HIDE_NON_IR_METADATA (0x0008) 713 #define MPI_MANPAGE4_EXTFLAGS_SAS_CACHE_DISABLE (0x0004) 714 #define MPI_MANPAGE4_EXTFLAGS_SATA_CACHE_DISABLE (0x0002) 715 #define MPI_MANPAGE4_EXTFLAGS_LEGACY_MODE (0x0001) 716 717 718 #ifndef MPI_MANPAGE5_NUM_FORCEWWID 719 #define MPI_MANPAGE5_NUM_FORCEWWID (1) 720 #endif 721 722 typedef struct _CONFIG_PAGE_MANUFACTURING_5 723 { 724 CONFIG_PAGE_HEADER Header; /* 00h */ 725 U64 BaseWWID; /* 04h */ 726 U8 Flags; /* 0Ch */ 727 U8 NumForceWWID; /* 0Dh */ 728 U16 Reserved2; /* 0Eh */ 729 U32 Reserved3; /* 10h */ 730 U32 Reserved4; /* 14h */ 731 U64 ForceWWID[MPI_MANPAGE5_NUM_FORCEWWID]; /* 18h */ 732 } CONFIG_PAGE_MANUFACTURING_5, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_5, 733 ManufacturingPage5_t, MPI_POINTER pManufacturingPage5_t; 734 735 #define MPI_MANUFACTURING5_PAGEVERSION (0x02) 736 737 /* defines for the Flags field */ 738 #define MPI_MANPAGE5_TWO_WWID_PER_PHY (0x01) 739 740 741 typedef struct _CONFIG_PAGE_MANUFACTURING_6 742 { 743 CONFIG_PAGE_HEADER Header; /* 00h */ 744 U32 ProductSpecificInfo;/* 04h */ 745 } CONFIG_PAGE_MANUFACTURING_6, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_6, 746 ManufacturingPage6_t, MPI_POINTER pManufacturingPage6_t; 747 748 #define MPI_MANUFACTURING6_PAGEVERSION (0x00) 749 750 751 typedef struct _MPI_MANPAGE7_CONNECTOR_INFO 752 { 753 U32 Pinout; /* 00h */ 754 U8 Connector[16]; /* 04h */ 755 U8 Location; /* 14h */ 756 U8 Reserved1; /* 15h */ 757 U16 Slot; /* 16h */ 758 U32 Reserved2; /* 18h */ 759 } MPI_MANPAGE7_CONNECTOR_INFO, MPI_POINTER PTR_MPI_MANPAGE7_CONNECTOR_INFO, 760 MpiManPage7ConnectorInfo_t, MPI_POINTER pMpiManPage7ConnectorInfo_t; 761 762 /* defines for the Pinout field */ 763 #define MPI_MANPAGE7_PINOUT_SFF_8484_L4 (0x00080000) 764 #define MPI_MANPAGE7_PINOUT_SFF_8484_L3 (0x00040000) 765 #define MPI_MANPAGE7_PINOUT_SFF_8484_L2 (0x00020000) 766 #define MPI_MANPAGE7_PINOUT_SFF_8484_L1 (0x00010000) 767 #define MPI_MANPAGE7_PINOUT_SFF_8470_L4 (0x00000800) 768 #define MPI_MANPAGE7_PINOUT_SFF_8470_L3 (0x00000400) 769 #define MPI_MANPAGE7_PINOUT_SFF_8470_L2 (0x00000200) 770 #define MPI_MANPAGE7_PINOUT_SFF_8470_L1 (0x00000100) 771 #define MPI_MANPAGE7_PINOUT_SFF_8482 (0x00000002) 772 #define MPI_MANPAGE7_PINOUT_CONNECTION_UNKNOWN (0x00000001) 773 774 /* defines for the Location field */ 775 #define MPI_MANPAGE7_LOCATION_UNKNOWN (0x01) 776 #define MPI_MANPAGE7_LOCATION_INTERNAL (0x02) 777 #define MPI_MANPAGE7_LOCATION_EXTERNAL (0x04) 778 #define MPI_MANPAGE7_LOCATION_SWITCHABLE (0x08) 779 #define MPI_MANPAGE7_LOCATION_AUTO (0x10) 780 #define MPI_MANPAGE7_LOCATION_NOT_PRESENT (0x20) 781 #define MPI_MANPAGE7_LOCATION_NOT_CONNECTED (0x80) 782 783 /* 784 * Host code (drivers, BIOS, utilities, etc.) should leave this define set to 785 * one and check NumPhys at runtime. 786 */ 787 #ifndef MPI_MANPAGE7_CONNECTOR_INFO_MAX 788 #define MPI_MANPAGE7_CONNECTOR_INFO_MAX (1) 789 #endif 790 791 typedef struct _CONFIG_PAGE_MANUFACTURING_7 792 { 793 CONFIG_PAGE_HEADER Header; /* 00h */ 794 U32 Reserved1; /* 04h */ 795 U32 Reserved2; /* 08h */ 796 U32 Flags; /* 0Ch */ 797 U8 EnclosureName[16]; /* 10h */ 798 U8 NumPhys; /* 20h */ 799 U8 Reserved3; /* 21h */ 800 U16 Reserved4; /* 22h */ 801 MPI_MANPAGE7_CONNECTOR_INFO ConnectorInfo[MPI_MANPAGE7_CONNECTOR_INFO_MAX]; /* 24h */ 802 } CONFIG_PAGE_MANUFACTURING_7, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_7, 803 ManufacturingPage7_t, MPI_POINTER pManufacturingPage7_t; 804 805 #define MPI_MANUFACTURING7_PAGEVERSION (0x00) 806 807 /* defines for the Flags field */ 808 #define MPI_MANPAGE7_FLAG_USE_SLOT_INFO (0x00000001) 809 810 811 typedef struct _CONFIG_PAGE_MANUFACTURING_8 812 { 813 CONFIG_PAGE_HEADER Header; /* 00h */ 814 U32 ProductSpecificInfo;/* 04h */ 815 } CONFIG_PAGE_MANUFACTURING_8, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_8, 816 ManufacturingPage8_t, MPI_POINTER pManufacturingPage8_t; 817 818 #define MPI_MANUFACTURING8_PAGEVERSION (0x00) 819 820 821 typedef struct _CONFIG_PAGE_MANUFACTURING_9 822 { 823 CONFIG_PAGE_HEADER Header; /* 00h */ 824 U32 ProductSpecificInfo;/* 04h */ 825 } CONFIG_PAGE_MANUFACTURING_9, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_9, 826 ManufacturingPage9_t, MPI_POINTER pManufacturingPage9_t; 827 828 #define MPI_MANUFACTURING9_PAGEVERSION (0x00) 829 830 831 typedef struct _CONFIG_PAGE_MANUFACTURING_10 832 { 833 CONFIG_PAGE_HEADER Header; /* 00h */ 834 U32 ProductSpecificInfo;/* 04h */ 835 } CONFIG_PAGE_MANUFACTURING_10, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_10, 836 ManufacturingPage10_t, MPI_POINTER pManufacturingPage10_t; 837 838 #define MPI_MANUFACTURING10_PAGEVERSION (0x00) 839 840 841 /**************************************************************************** 842 * IO Unit Config Pages 843 ****************************************************************************/ 844 845 typedef struct _CONFIG_PAGE_IO_UNIT_0 846 { 847 CONFIG_PAGE_HEADER Header; /* 00h */ 848 U64 UniqueValue; /* 04h */ 849 } CONFIG_PAGE_IO_UNIT_0, MPI_POINTER PTR_CONFIG_PAGE_IO_UNIT_0, 850 IOUnitPage0_t, MPI_POINTER pIOUnitPage0_t; 851 852 #define MPI_IOUNITPAGE0_PAGEVERSION (0x00) 853 854 855 typedef struct _CONFIG_PAGE_IO_UNIT_1 856 { 857 CONFIG_PAGE_HEADER Header; /* 00h */ 858 U32 Flags; /* 04h */ 859 } CONFIG_PAGE_IO_UNIT_1, MPI_POINTER PTR_CONFIG_PAGE_IO_UNIT_1, 860 IOUnitPage1_t, MPI_POINTER pIOUnitPage1_t; 861 862 #define MPI_IOUNITPAGE1_PAGEVERSION (0x02) 863 864 /* IO Unit Page 1 Flags defines */ 865 #define MPI_IOUNITPAGE1_MULTI_FUNCTION (0x00000000) 866 #define MPI_IOUNITPAGE1_SINGLE_FUNCTION (0x00000001) 867 #define MPI_IOUNITPAGE1_MULTI_PATHING (0x00000002) 868 #define MPI_IOUNITPAGE1_SINGLE_PATHING (0x00000000) 869 #define MPI_IOUNITPAGE1_IR_USE_STATIC_VOLUME_ID (0x00000004) 870 #define MPI_IOUNITPAGE1_DISABLE_QUEUE_FULL_HANDLING (0x00000020) 871 #define MPI_IOUNITPAGE1_DISABLE_IR (0x00000040) 872 #define MPI_IOUNITPAGE1_FORCE_32 (0x00000080) 873 #define MPI_IOUNITPAGE1_NATIVE_COMMAND_Q_DISABLE (0x00000100) 874 #define MPI_IOUNITPAGE1_SATA_WRITE_CACHE_DISABLE (0x00000200) 875 876 typedef struct _MPI_ADAPTER_INFO 877 { 878 U8 PciBusNumber; /* 00h */ 879 U8 PciDeviceAndFunctionNumber; /* 01h */ 880 U16 AdapterFlags; /* 02h */ 881 } MPI_ADAPTER_INFO, MPI_POINTER PTR_MPI_ADAPTER_INFO, 882 MpiAdapterInfo_t, MPI_POINTER pMpiAdapterInfo_t; 883 884 #define MPI_ADAPTER_INFO_FLAGS_EMBEDDED (0x0001) 885 #define MPI_ADAPTER_INFO_FLAGS_INIT_STATUS (0x0002) 886 887 typedef struct _CONFIG_PAGE_IO_UNIT_2 888 { 889 CONFIG_PAGE_HEADER Header; /* 00h */ 890 U32 Flags; /* 04h */ 891 U32 BiosVersion; /* 08h */ 892 MPI_ADAPTER_INFO AdapterOrder[4]; /* 0Ch */ 893 U32 Reserved1; /* 1Ch */ 894 } CONFIG_PAGE_IO_UNIT_2, MPI_POINTER PTR_CONFIG_PAGE_IO_UNIT_2, 895 IOUnitPage2_t, MPI_POINTER pIOUnitPage2_t; 896 897 #define MPI_IOUNITPAGE2_PAGEVERSION (0x02) 898 899 #define MPI_IOUNITPAGE2_FLAGS_PAUSE_ON_ERROR (0x00000002) 900 #define MPI_IOUNITPAGE2_FLAGS_VERBOSE_ENABLE (0x00000004) 901 #define MPI_IOUNITPAGE2_FLAGS_COLOR_VIDEO_DISABLE (0x00000008) 902 #define MPI_IOUNITPAGE2_FLAGS_DONT_HOOK_INT_40 (0x00000010) 903 904 #define MPI_IOUNITPAGE2_FLAGS_DEV_LIST_DISPLAY_MASK (0x000000E0) 905 #define MPI_IOUNITPAGE2_FLAGS_INSTALLED_DEV_DISPLAY (0x00000000) 906 #define MPI_IOUNITPAGE2_FLAGS_ADAPTER_DISPLAY (0x00000020) 907 #define MPI_IOUNITPAGE2_FLAGS_ADAPTER_DEV_DISPLAY (0x00000040) 908 909 910 /* 911 * Host code (drivers, BIOS, utilities, etc.) should leave this define set to 912 * one and check Header.PageLength at runtime. 913 */ 914 #ifndef MPI_IO_UNIT_PAGE_3_GPIO_VAL_MAX 915 #define MPI_IO_UNIT_PAGE_3_GPIO_VAL_MAX (1) 916 #endif 917 918 typedef struct _CONFIG_PAGE_IO_UNIT_3 919 { 920 CONFIG_PAGE_HEADER Header; /* 00h */ 921 U8 GPIOCount; /* 04h */ 922 U8 Reserved1; /* 05h */ 923 U16 Reserved2; /* 06h */ 924 U16 GPIOVal[MPI_IO_UNIT_PAGE_3_GPIO_VAL_MAX]; /* 08h */ 925 } CONFIG_PAGE_IO_UNIT_3, MPI_POINTER PTR_CONFIG_PAGE_IO_UNIT_3, 926 IOUnitPage3_t, MPI_POINTER pIOUnitPage3_t; 927 928 #define MPI_IOUNITPAGE3_PAGEVERSION (0x01) 929 930 #define MPI_IOUNITPAGE3_GPIO_FUNCTION_MASK (0xFC) 931 #define MPI_IOUNITPAGE3_GPIO_FUNCTION_SHIFT (2) 932 #define MPI_IOUNITPAGE3_GPIO_SETTING_OFF (0x00) 933 #define MPI_IOUNITPAGE3_GPIO_SETTING_ON (0x01) 934 935 936 typedef struct _CONFIG_PAGE_IO_UNIT_4 937 { 938 CONFIG_PAGE_HEADER Header; /* 00h */ 939 U32 Reserved1; /* 04h */ 940 SGE_SIMPLE_UNION FWImageSGE; /* 08h */ 941 } CONFIG_PAGE_IO_UNIT_4, MPI_POINTER PTR_CONFIG_PAGE_IO_UNIT_4, 942 IOUnitPage4_t, MPI_POINTER pIOUnitPage4_t; 943 944 #define MPI_IOUNITPAGE4_PAGEVERSION (0x00) 945 946 947 /**************************************************************************** 948 * IOC Config Pages 949 ****************************************************************************/ 950 951 typedef struct _CONFIG_PAGE_IOC_0 952 { 953 CONFIG_PAGE_HEADER Header; /* 00h */ 954 U32 TotalNVStore; /* 04h */ 955 U32 FreeNVStore; /* 08h */ 956 U16 VendorID; /* 0Ch */ 957 U16 DeviceID; /* 0Eh */ 958 U8 RevisionID; /* 10h */ 959 U8 Reserved[3]; /* 11h */ 960 U32 ClassCode; /* 14h */ 961 U16 SubsystemVendorID; /* 18h */ 962 U16 SubsystemID; /* 1Ah */ 963 } CONFIG_PAGE_IOC_0, MPI_POINTER PTR_CONFIG_PAGE_IOC_0, 964 IOCPage0_t, MPI_POINTER pIOCPage0_t; 965 966 #define MPI_IOCPAGE0_PAGEVERSION (0x01) 967 968 969 typedef struct _CONFIG_PAGE_IOC_1 970 { 971 CONFIG_PAGE_HEADER Header; /* 00h */ 972 U32 Flags; /* 04h */ 973 U32 CoalescingTimeout; /* 08h */ 974 U8 CoalescingDepth; /* 0Ch */ 975 U8 PCISlotNum; /* 0Dh */ 976 U8 Reserved[2]; /* 0Eh */ 977 } CONFIG_PAGE_IOC_1, MPI_POINTER PTR_CONFIG_PAGE_IOC_1, 978 IOCPage1_t, MPI_POINTER pIOCPage1_t; 979 980 #define MPI_IOCPAGE1_PAGEVERSION (0x03) 981 982 /* defines for the Flags field */ 983 #define MPI_IOCPAGE1_EEDP_MODE_MASK (0x07000000) 984 #define MPI_IOCPAGE1_EEDP_MODE_OFF (0x00000000) 985 #define MPI_IOCPAGE1_EEDP_MODE_T10 (0x01000000) 986 #define MPI_IOCPAGE1_EEDP_MODE_LSI_1 (0x02000000) 987 #define MPI_IOCPAGE1_INITIATOR_CONTEXT_REPLY_DISABLE (0x00000010) 988 #define MPI_IOCPAGE1_REPLY_COALESCING (0x00000001) 989 990 #define MPI_IOCPAGE1_PCISLOTNUM_UNKNOWN (0xFF) 991 992 993 typedef struct _CONFIG_PAGE_IOC_2_RAID_VOL 994 { 995 U8 VolumeID; /* 00h */ 996 U8 VolumeBus; /* 01h */ 997 U8 VolumeIOC; /* 02h */ 998 U8 VolumePageNumber; /* 03h */ 999 U8 VolumeType; /* 04h */ 1000 U8 Flags; /* 05h */ 1001 U16 Reserved3; /* 06h */ 1002 } CONFIG_PAGE_IOC_2_RAID_VOL, MPI_POINTER PTR_CONFIG_PAGE_IOC_2_RAID_VOL, 1003 ConfigPageIoc2RaidVol_t, MPI_POINTER pConfigPageIoc2RaidVol_t; 1004 1005 /* IOC Page 2 Volume RAID Type values, also used in RAID Volume pages */ 1006 1007 #define MPI_RAID_VOL_TYPE_IS (0x00) 1008 #define MPI_RAID_VOL_TYPE_IME (0x01) 1009 #define MPI_RAID_VOL_TYPE_IM (0x02) 1010 #define MPI_RAID_VOL_TYPE_RAID_5 (0x03) 1011 #define MPI_RAID_VOL_TYPE_RAID_6 (0x04) 1012 #define MPI_RAID_VOL_TYPE_RAID_10 (0x05) 1013 #define MPI_RAID_VOL_TYPE_RAID_50 (0x06) 1014 #define MPI_RAID_VOL_TYPE_UNKNOWN (0xFF) 1015 1016 /* IOC Page 2 Volume Flags values */ 1017 1018 #define MPI_IOCPAGE2_FLAG_VOLUME_INACTIVE (0x08) 1019 1020 /* 1021 * Host code (drivers, BIOS, utilities, etc.) should leave this define set to 1022 * one and check Header.PageLength at runtime. 1023 */ 1024 #ifndef MPI_IOC_PAGE_2_RAID_VOLUME_MAX 1025 #define MPI_IOC_PAGE_2_RAID_VOLUME_MAX (1) 1026 #endif 1027 1028 typedef struct _CONFIG_PAGE_IOC_2 1029 { 1030 CONFIG_PAGE_HEADER Header; /* 00h */ 1031 U32 CapabilitiesFlags; /* 04h */ 1032 U8 NumActiveVolumes; /* 08h */ 1033 U8 MaxVolumes; /* 09h */ 1034 U8 NumActivePhysDisks; /* 0Ah */ 1035 U8 MaxPhysDisks; /* 0Bh */ 1036 CONFIG_PAGE_IOC_2_RAID_VOL RaidVolume[MPI_IOC_PAGE_2_RAID_VOLUME_MAX];/* 0Ch */ 1037 } CONFIG_PAGE_IOC_2, MPI_POINTER PTR_CONFIG_PAGE_IOC_2, 1038 IOCPage2_t, MPI_POINTER pIOCPage2_t; 1039 1040 #define MPI_IOCPAGE2_PAGEVERSION (0x04) 1041 1042 /* IOC Page 2 Capabilities flags */ 1043 1044 #define MPI_IOCPAGE2_CAP_FLAGS_IS_SUPPORT (0x00000001) 1045 #define MPI_IOCPAGE2_CAP_FLAGS_IME_SUPPORT (0x00000002) 1046 #define MPI_IOCPAGE2_CAP_FLAGS_IM_SUPPORT (0x00000004) 1047 #define MPI_IOCPAGE2_CAP_FLAGS_RAID_5_SUPPORT (0x00000008) 1048 #define MPI_IOCPAGE2_CAP_FLAGS_RAID_6_SUPPORT (0x00000010) 1049 #define MPI_IOCPAGE2_CAP_FLAGS_RAID_10_SUPPORT (0x00000020) 1050 #define MPI_IOCPAGE2_CAP_FLAGS_RAID_50_SUPPORT (0x00000040) 1051 #define MPI_IOCPAGE2_CAP_FLAGS_RAID_64_BIT_ADDRESSING (0x10000000) 1052 #define MPI_IOCPAGE2_CAP_FLAGS_SES_SUPPORT (0x20000000) 1053 #define MPI_IOCPAGE2_CAP_FLAGS_SAFTE_SUPPORT (0x40000000) 1054 #define MPI_IOCPAGE2_CAP_FLAGS_CROSS_CHANNEL_SUPPORT (0x80000000) 1055 1056 1057 typedef struct _IOC_3_PHYS_DISK 1058 { 1059 U8 PhysDiskID; /* 00h */ 1060 U8 PhysDiskBus; /* 01h */ 1061 U8 PhysDiskIOC; /* 02h */ 1062 U8 PhysDiskNum; /* 03h */ 1063 } IOC_3_PHYS_DISK, MPI_POINTER PTR_IOC_3_PHYS_DISK, 1064 Ioc3PhysDisk_t, MPI_POINTER pIoc3PhysDisk_t; 1065 1066 /* 1067 * Host code (drivers, BIOS, utilities, etc.) should leave this define set to 1068 * one and check Header.PageLength at runtime. 1069 */ 1070 #ifndef MPI_IOC_PAGE_3_PHYSDISK_MAX 1071 #define MPI_IOC_PAGE_3_PHYSDISK_MAX (1) 1072 #endif 1073 1074 typedef struct _CONFIG_PAGE_IOC_3 1075 { 1076 CONFIG_PAGE_HEADER Header; /* 00h */ 1077 U8 NumPhysDisks; /* 04h */ 1078 U8 Reserved1; /* 05h */ 1079 U16 Reserved2; /* 06h */ 1080 IOC_3_PHYS_DISK PhysDisk[MPI_IOC_PAGE_3_PHYSDISK_MAX]; /* 08h */ 1081 } CONFIG_PAGE_IOC_3, MPI_POINTER PTR_CONFIG_PAGE_IOC_3, 1082 IOCPage3_t, MPI_POINTER pIOCPage3_t; 1083 1084 #define MPI_IOCPAGE3_PAGEVERSION (0x00) 1085 1086 1087 typedef struct _IOC_4_SEP 1088 { 1089 U8 SEPTargetID; /* 00h */ 1090 U8 SEPBus; /* 01h */ 1091 U16 Reserved; /* 02h */ 1092 } IOC_4_SEP, MPI_POINTER PTR_IOC_4_SEP, 1093 Ioc4Sep_t, MPI_POINTER pIoc4Sep_t; 1094 1095 /* 1096 * Host code (drivers, BIOS, utilities, etc.) should leave this define set to 1097 * one and check Header.PageLength at runtime. 1098 */ 1099 #ifndef MPI_IOC_PAGE_4_SEP_MAX 1100 #define MPI_IOC_PAGE_4_SEP_MAX (1) 1101 #endif 1102 1103 typedef struct _CONFIG_PAGE_IOC_4 1104 { 1105 CONFIG_PAGE_HEADER Header; /* 00h */ 1106 U8 ActiveSEP; /* 04h */ 1107 U8 MaxSEP; /* 05h */ 1108 U16 Reserved1; /* 06h */ 1109 IOC_4_SEP SEP[MPI_IOC_PAGE_4_SEP_MAX]; /* 08h */ 1110 } CONFIG_PAGE_IOC_4, MPI_POINTER PTR_CONFIG_PAGE_IOC_4, 1111 IOCPage4_t, MPI_POINTER pIOCPage4_t; 1112 1113 #define MPI_IOCPAGE4_PAGEVERSION (0x00) 1114 1115 1116 typedef struct _IOC_5_HOT_SPARE 1117 { 1118 U8 PhysDiskNum; /* 00h */ 1119 U8 Reserved; /* 01h */ 1120 U8 HotSparePool; /* 02h */ 1121 U8 Flags; /* 03h */ 1122 } IOC_5_HOT_SPARE, MPI_POINTER PTR_IOC_5_HOT_SPARE, 1123 Ioc5HotSpare_t, MPI_POINTER pIoc5HotSpare_t; 1124 1125 /* IOC Page 5 HotSpare Flags */ 1126 #define MPI_IOC_PAGE_5_HOT_SPARE_ACTIVE (0x01) 1127 1128 /* 1129 * Host code (drivers, BIOS, utilities, etc.) should leave this define set to 1130 * one and check Header.PageLength at runtime. 1131 */ 1132 #ifndef MPI_IOC_PAGE_5_HOT_SPARE_MAX 1133 #define MPI_IOC_PAGE_5_HOT_SPARE_MAX (1) 1134 #endif 1135 1136 typedef struct _CONFIG_PAGE_IOC_5 1137 { 1138 CONFIG_PAGE_HEADER Header; /* 00h */ 1139 U32 Reserved1; /* 04h */ 1140 U8 NumHotSpares; /* 08h */ 1141 U8 Reserved2; /* 09h */ 1142 U16 Reserved3; /* 0Ah */ 1143 IOC_5_HOT_SPARE HotSpare[MPI_IOC_PAGE_5_HOT_SPARE_MAX]; /* 0Ch */ 1144 } CONFIG_PAGE_IOC_5, MPI_POINTER PTR_CONFIG_PAGE_IOC_5, 1145 IOCPage5_t, MPI_POINTER pIOCPage5_t; 1146 1147 #define MPI_IOCPAGE5_PAGEVERSION (0x00) 1148 1149 typedef struct _CONFIG_PAGE_IOC_6 1150 { 1151 CONFIG_PAGE_HEADER Header; /* 00h */ 1152 U32 CapabilitiesFlags; /* 04h */ 1153 U8 MaxDrivesIS; /* 08h */ 1154 U8 MaxDrivesIM; /* 09h */ 1155 U8 MaxDrivesIME; /* 0Ah */ 1156 U8 Reserved1; /* 0Bh */ 1157 U8 MinDrivesIS; /* 0Ch */ 1158 U8 MinDrivesIM; /* 0Dh */ 1159 U8 MinDrivesIME; /* 0Eh */ 1160 U8 Reserved2; /* 0Fh */ 1161 U8 MaxGlobalHotSpares; /* 10h */ 1162 U8 Reserved3; /* 11h */ 1163 U16 Reserved4; /* 12h */ 1164 U32 Reserved5; /* 14h */ 1165 U32 SupportedStripeSizeMapIS; /* 18h */ 1166 U32 SupportedStripeSizeMapIME; /* 1Ch */ 1167 U32 Reserved6; /* 20h */ 1168 U8 MetadataSize; /* 24h */ 1169 U8 Reserved7; /* 25h */ 1170 U16 Reserved8; /* 26h */ 1171 U16 MaxBadBlockTableEntries; /* 28h */ 1172 U16 Reserved9; /* 2Ah */ 1173 U16 IRNvsramUsage; /* 2Ch */ 1174 U16 Reserved10; /* 2Eh */ 1175 U32 IRNvsramVersion; /* 30h */ 1176 U32 Reserved11; /* 34h */ 1177 U32 Reserved12; /* 38h */ 1178 } CONFIG_PAGE_IOC_6, MPI_POINTER PTR_CONFIG_PAGE_IOC_6, 1179 IOCPage6_t, MPI_POINTER pIOCPage6_t; 1180 1181 #define MPI_IOCPAGE6_PAGEVERSION (0x01) 1182 1183 /* IOC Page 6 Capabilities Flags */ 1184 1185 #define MPI_IOCPAGE6_CAP_FLAGS_SSD_SUPPORT (0x00000020) 1186 #define MPI_IOCPAGE6_CAP_FLAGS_MULTIPORT_DRIVE_SUPPORT (0x00000010) 1187 #define MPI_IOCPAGE6_CAP_FLAGS_DISABLE_SMART_POLLING (0x00000008) 1188 1189 #define MPI_IOCPAGE6_CAP_FLAGS_MASK_METADATA_SIZE (0x00000006) 1190 #define MPI_IOCPAGE6_CAP_FLAGS_64MB_METADATA_SIZE (0x00000000) 1191 #define MPI_IOCPAGE6_CAP_FLAGS_512MB_METADATA_SIZE (0x00000002) 1192 1193 #define MPI_IOCPAGE6_CAP_FLAGS_GLOBAL_HOT_SPARE (0x00000001) 1194 1195 1196 /**************************************************************************** 1197 * BIOS Config Pages 1198 ****************************************************************************/ 1199 1200 typedef struct _CONFIG_PAGE_BIOS_1 1201 { 1202 CONFIG_PAGE_HEADER Header; /* 00h */ 1203 U32 BiosOptions; /* 04h */ 1204 U32 IOCSettings; /* 08h */ 1205 U32 Reserved1; /* 0Ch */ 1206 U32 DeviceSettings; /* 10h */ 1207 U16 NumberOfDevices; /* 14h */ 1208 U8 ExpanderSpinup; /* 16h */ 1209 U8 Reserved2; /* 17h */ 1210 U16 IOTimeoutBlockDevicesNonRM; /* 18h */ 1211 U16 IOTimeoutSequential; /* 1Ah */ 1212 U16 IOTimeoutOther; /* 1Ch */ 1213 U16 IOTimeoutBlockDevicesRM; /* 1Eh */ 1214 } CONFIG_PAGE_BIOS_1, MPI_POINTER PTR_CONFIG_PAGE_BIOS_1, 1215 BIOSPage1_t, MPI_POINTER pBIOSPage1_t; 1216 1217 #define MPI_BIOSPAGE1_PAGEVERSION (0x03) 1218 1219 /* values for the BiosOptions field */ 1220 #define MPI_BIOSPAGE1_OPTIONS_SPI_ENABLE (0x00000400) 1221 #define MPI_BIOSPAGE1_OPTIONS_FC_ENABLE (0x00000200) 1222 #define MPI_BIOSPAGE1_OPTIONS_SAS_ENABLE (0x00000100) 1223 #define MPI_BIOSPAGE1_OPTIONS_DISABLE_BIOS (0x00000001) 1224 1225 /* values for the IOCSettings field */ 1226 #define MPI_BIOSPAGE1_IOCSET_MASK_INITIAL_SPINUP_DELAY (0x0F000000) 1227 #define MPI_BIOSPAGE1_IOCSET_SHIFT_INITIAL_SPINUP_DELAY (24) 1228 1229 #define MPI_BIOSPAGE1_IOCSET_MASK_PORT_ENABLE_DELAY (0x00F00000) 1230 #define MPI_BIOSPAGE1_IOCSET_SHIFT_PORT_ENABLE_DELAY (20) 1231 1232 #define MPI_BIOSPAGE1_IOCSET_AUTO_PORT_ENABLE (0x00080000) 1233 #define MPI_BIOSPAGE1_IOCSET_DIRECT_ATTACH_SPINUP_MODE (0x00040000) 1234 1235 #define MPI_BIOSPAGE1_IOCSET_MASK_BOOT_PREFERENCE (0x00030000) 1236 #define MPI_BIOSPAGE1_IOCSET_ENCLOSURE_SLOT_BOOT (0x00000000) 1237 #define MPI_BIOSPAGE1_IOCSET_SAS_ADDRESS_BOOT (0x00010000) 1238 1239 #define MPI_BIOSPAGE1_IOCSET_MASK_MAX_TARGET_SPIN_UP (0x0000F000) 1240 #define MPI_BIOSPAGE1_IOCSET_SHIFT_MAX_TARGET_SPIN_UP (12) 1241 1242 #define MPI_BIOSPAGE1_IOCSET_MASK_SPINUP_DELAY (0x00000F00) 1243 #define MPI_BIOSPAGE1_IOCSET_SHIFT_SPINUP_DELAY (8) 1244 1245 #define MPI_BIOSPAGE1_IOCSET_MASK_RM_SETTING (0x000000C0) 1246 #define MPI_BIOSPAGE1_IOCSET_NONE_RM_SETTING (0x00000000) 1247 #define MPI_BIOSPAGE1_IOCSET_BOOT_RM_SETTING (0x00000040) 1248 #define MPI_BIOSPAGE1_IOCSET_MEDIA_RM_SETTING (0x00000080) 1249 1250 #define MPI_BIOSPAGE1_IOCSET_MASK_ADAPTER_SUPPORT (0x00000030) 1251 #define MPI_BIOSPAGE1_IOCSET_NO_SUPPORT (0x00000000) 1252 #define MPI_BIOSPAGE1_IOCSET_BIOS_SUPPORT (0x00000010) 1253 #define MPI_BIOSPAGE1_IOCSET_OS_SUPPORT (0x00000020) 1254 #define MPI_BIOSPAGE1_IOCSET_ALL_SUPPORT (0x00000030) 1255 1256 #define MPI_BIOSPAGE1_IOCSET_ALTERNATE_CHS (0x00000008) 1257 1258 /* values for the DeviceSettings field */ 1259 #define MPI_BIOSPAGE1_DEVSET_DISABLE_SMART_POLLING (0x00000010) 1260 #define MPI_BIOSPAGE1_DEVSET_DISABLE_SEQ_LUN (0x00000008) 1261 #define MPI_BIOSPAGE1_DEVSET_DISABLE_RM_LUN (0x00000004) 1262 #define MPI_BIOSPAGE1_DEVSET_DISABLE_NON_RM_LUN (0x00000002) 1263 #define MPI_BIOSPAGE1_DEVSET_DISABLE_OTHER_LUN (0x00000001) 1264 1265 /* defines for the ExpanderSpinup field */ 1266 #define MPI_BIOSPAGE1_EXPSPINUP_MASK_MAX_TARGET (0xF0) 1267 #define MPI_BIOSPAGE1_EXPSPINUP_SHIFT_MAX_TARGET (4) 1268 #define MPI_BIOSPAGE1_EXPSPINUP_MASK_DELAY (0x0F) 1269 1270 typedef struct _MPI_BOOT_DEVICE_ADAPTER_ORDER 1271 { 1272 U32 Reserved1; /* 00h */ 1273 U32 Reserved2; /* 04h */ 1274 U32 Reserved3; /* 08h */ 1275 U32 Reserved4; /* 0Ch */ 1276 U32 Reserved5; /* 10h */ 1277 U32 Reserved6; /* 14h */ 1278 U32 Reserved7; /* 18h */ 1279 U32 Reserved8; /* 1Ch */ 1280 U32 Reserved9; /* 20h */ 1281 U32 Reserved10; /* 24h */ 1282 U32 Reserved11; /* 28h */ 1283 U32 Reserved12; /* 2Ch */ 1284 U32 Reserved13; /* 30h */ 1285 U32 Reserved14; /* 34h */ 1286 U32 Reserved15; /* 38h */ 1287 U32 Reserved16; /* 3Ch */ 1288 U32 Reserved17; /* 40h */ 1289 } MPI_BOOT_DEVICE_ADAPTER_ORDER, MPI_POINTER PTR_MPI_BOOT_DEVICE_ADAPTER_ORDER; 1290 1291 typedef struct _MPI_BOOT_DEVICE_ADAPTER_NUMBER 1292 { 1293 U8 TargetID; /* 00h */ 1294 U8 Bus; /* 01h */ 1295 U8 AdapterNumber; /* 02h */ 1296 U8 Reserved1; /* 03h */ 1297 U32 Reserved2; /* 04h */ 1298 U32 Reserved3; /* 08h */ 1299 U32 Reserved4; /* 0Ch */ 1300 U8 LUN[8]; /* 10h */ 1301 U32 Reserved5; /* 18h */ 1302 U32 Reserved6; /* 1Ch */ 1303 U32 Reserved7; /* 20h */ 1304 U32 Reserved8; /* 24h */ 1305 U32 Reserved9; /* 28h */ 1306 U32 Reserved10; /* 2Ch */ 1307 U32 Reserved11; /* 30h */ 1308 U32 Reserved12; /* 34h */ 1309 U32 Reserved13; /* 38h */ 1310 U32 Reserved14; /* 3Ch */ 1311 U32 Reserved15; /* 40h */ 1312 } MPI_BOOT_DEVICE_ADAPTER_NUMBER, MPI_POINTER PTR_MPI_BOOT_DEVICE_ADAPTER_NUMBER; 1313 1314 typedef struct _MPI_BOOT_DEVICE_PCI_ADDRESS 1315 { 1316 U8 TargetID; /* 00h */ 1317 U8 Bus; /* 01h */ 1318 U16 PCIAddress; /* 02h */ 1319 U32 Reserved1; /* 04h */ 1320 U32 Reserved2; /* 08h */ 1321 U32 Reserved3; /* 0Ch */ 1322 U8 LUN[8]; /* 10h */ 1323 U32 Reserved4; /* 18h */ 1324 U32 Reserved5; /* 1Ch */ 1325 U32 Reserved6; /* 20h */ 1326 U32 Reserved7; /* 24h */ 1327 U32 Reserved8; /* 28h */ 1328 U32 Reserved9; /* 2Ch */ 1329 U32 Reserved10; /* 30h */ 1330 U32 Reserved11; /* 34h */ 1331 U32 Reserved12; /* 38h */ 1332 U32 Reserved13; /* 3Ch */ 1333 U32 Reserved14; /* 40h */ 1334 } MPI_BOOT_DEVICE_PCI_ADDRESS, MPI_POINTER PTR_MPI_BOOT_DEVICE_PCI_ADDRESS; 1335 1336 typedef struct _MPI_BOOT_DEVICE_SLOT_NUMBER 1337 { 1338 U8 TargetID; /* 00h */ 1339 U8 Bus; /* 01h */ 1340 U8 PCISlotNumber; /* 02h */ 1341 U8 Reserved1; /* 03h */ 1342 U32 Reserved2; /* 04h */ 1343 U32 Reserved3; /* 08h */ 1344 U32 Reserved4; /* 0Ch */ 1345 U8 LUN[8]; /* 10h */ 1346 U32 Reserved5; /* 18h */ 1347 U32 Reserved6; /* 1Ch */ 1348 U32 Reserved7; /* 20h */ 1349 U32 Reserved8; /* 24h */ 1350 U32 Reserved9; /* 28h */ 1351 U32 Reserved10; /* 2Ch */ 1352 U32 Reserved11; /* 30h */ 1353 U32 Reserved12; /* 34h */ 1354 U32 Reserved13; /* 38h */ 1355 U32 Reserved14; /* 3Ch */ 1356 U32 Reserved15; /* 40h */ 1357 } MPI_BOOT_DEVICE_PCI_SLOT_NUMBER, MPI_POINTER PTR_MPI_BOOT_DEVICE_PCI_SLOT_NUMBER; 1358 1359 typedef struct _MPI_BOOT_DEVICE_FC_WWN 1360 { 1361 U64 WWPN; /* 00h */ 1362 U32 Reserved1; /* 08h */ 1363 U32 Reserved2; /* 0Ch */ 1364 U8 LUN[8]; /* 10h */ 1365 U32 Reserved3; /* 18h */ 1366 U32 Reserved4; /* 1Ch */ 1367 U32 Reserved5; /* 20h */ 1368 U32 Reserved6; /* 24h */ 1369 U32 Reserved7; /* 28h */ 1370 U32 Reserved8; /* 2Ch */ 1371 U32 Reserved9; /* 30h */ 1372 U32 Reserved10; /* 34h */ 1373 U32 Reserved11; /* 38h */ 1374 U32 Reserved12; /* 3Ch */ 1375 U32 Reserved13; /* 40h */ 1376 } MPI_BOOT_DEVICE_FC_WWN, MPI_POINTER PTR_MPI_BOOT_DEVICE_FC_WWN; 1377 1378 typedef struct _MPI_BOOT_DEVICE_SAS_WWN 1379 { 1380 U64 SASAddress; /* 00h */ 1381 U32 Reserved1; /* 08h */ 1382 U32 Reserved2; /* 0Ch */ 1383 U8 LUN[8]; /* 10h */ 1384 U32 Reserved3; /* 18h */ 1385 U32 Reserved4; /* 1Ch */ 1386 U32 Reserved5; /* 20h */ 1387 U32 Reserved6; /* 24h */ 1388 U32 Reserved7; /* 28h */ 1389 U32 Reserved8; /* 2Ch */ 1390 U32 Reserved9; /* 30h */ 1391 U32 Reserved10; /* 34h */ 1392 U32 Reserved11; /* 38h */ 1393 U32 Reserved12; /* 3Ch */ 1394 U32 Reserved13; /* 40h */ 1395 } MPI_BOOT_DEVICE_SAS_WWN, MPI_POINTER PTR_MPI_BOOT_DEVICE_SAS_WWN; 1396 1397 typedef struct _MPI_BOOT_DEVICE_ENCLOSURE_SLOT 1398 { 1399 U64 EnclosureLogicalID; /* 00h */ 1400 U32 Reserved1; /* 08h */ 1401 U32 Reserved2; /* 0Ch */ 1402 U8 LUN[8]; /* 10h */ 1403 U16 SlotNumber; /* 18h */ 1404 U16 Reserved3; /* 1Ah */ 1405 U32 Reserved4; /* 1Ch */ 1406 U32 Reserved5; /* 20h */ 1407 U32 Reserved6; /* 24h */ 1408 U32 Reserved7; /* 28h */ 1409 U32 Reserved8; /* 2Ch */ 1410 U32 Reserved9; /* 30h */ 1411 U32 Reserved10; /* 34h */ 1412 U32 Reserved11; /* 38h */ 1413 U32 Reserved12; /* 3Ch */ 1414 U32 Reserved13; /* 40h */ 1415 } MPI_BOOT_DEVICE_ENCLOSURE_SLOT, 1416 MPI_POINTER PTR_MPI_BOOT_DEVICE_ENCLOSURE_SLOT; 1417 1418 typedef union _MPI_BIOSPAGE2_BOOT_DEVICE 1419 { 1420 MPI_BOOT_DEVICE_ADAPTER_ORDER AdapterOrder; 1421 MPI_BOOT_DEVICE_ADAPTER_NUMBER AdapterNumber; 1422 MPI_BOOT_DEVICE_PCI_ADDRESS PCIAddress; 1423 MPI_BOOT_DEVICE_PCI_SLOT_NUMBER PCISlotNumber; 1424 MPI_BOOT_DEVICE_FC_WWN FcWwn; 1425 MPI_BOOT_DEVICE_SAS_WWN SasWwn; 1426 MPI_BOOT_DEVICE_ENCLOSURE_SLOT EnclosureSlot; 1427 } MPI_BIOSPAGE2_BOOT_DEVICE, MPI_POINTER PTR_MPI_BIOSPAGE2_BOOT_DEVICE; 1428 1429 typedef struct _CONFIG_PAGE_BIOS_2 1430 { 1431 CONFIG_PAGE_HEADER Header; /* 00h */ 1432 U32 Reserved1; /* 04h */ 1433 U32 Reserved2; /* 08h */ 1434 U32 Reserved3; /* 0Ch */ 1435 U32 Reserved4; /* 10h */ 1436 U32 Reserved5; /* 14h */ 1437 U32 Reserved6; /* 18h */ 1438 U8 BootDeviceForm; /* 1Ch */ 1439 U8 PrevBootDeviceForm; /* 1Ch */ 1440 U16 Reserved8; /* 1Eh */ 1441 MPI_BIOSPAGE2_BOOT_DEVICE BootDevice; /* 20h */ 1442 } CONFIG_PAGE_BIOS_2, MPI_POINTER PTR_CONFIG_PAGE_BIOS_2, 1443 BIOSPage2_t, MPI_POINTER pBIOSPage2_t; 1444 1445 #define MPI_BIOSPAGE2_PAGEVERSION (0x02) 1446 1447 #define MPI_BIOSPAGE2_FORM_MASK (0x0F) 1448 #define MPI_BIOSPAGE2_FORM_ADAPTER_ORDER (0x00) 1449 #define MPI_BIOSPAGE2_FORM_ADAPTER_NUMBER (0x01) 1450 #define MPI_BIOSPAGE2_FORM_PCI_ADDRESS (0x02) 1451 #define MPI_BIOSPAGE2_FORM_PCI_SLOT_NUMBER (0x03) 1452 #define MPI_BIOSPAGE2_FORM_FC_WWN (0x04) 1453 #define MPI_BIOSPAGE2_FORM_SAS_WWN (0x05) 1454 #define MPI_BIOSPAGE2_FORM_ENCLOSURE_SLOT (0x06) 1455 1456 typedef struct _CONFIG_PAGE_BIOS_4 1457 { 1458 CONFIG_PAGE_HEADER Header; /* 00h */ 1459 U64 ReassignmentBaseWWID; /* 04h */ 1460 } CONFIG_PAGE_BIOS_4, MPI_POINTER PTR_CONFIG_PAGE_BIOS_4, 1461 BIOSPage4_t, MPI_POINTER pBIOSPage4_t; 1462 1463 #define MPI_BIOSPAGE4_PAGEVERSION (0x00) 1464 1465 1466 /**************************************************************************** 1467 * SCSI Port Config Pages 1468 ****************************************************************************/ 1469 1470 typedef struct _CONFIG_PAGE_SCSI_PORT_0 1471 { 1472 CONFIG_PAGE_HEADER Header; /* 00h */ 1473 U32 Capabilities; /* 04h */ 1474 U32 PhysicalInterface; /* 08h */ 1475 } CONFIG_PAGE_SCSI_PORT_0, MPI_POINTER PTR_CONFIG_PAGE_SCSI_PORT_0, 1476 SCSIPortPage0_t, MPI_POINTER pSCSIPortPage0_t; 1477 1478 #define MPI_SCSIPORTPAGE0_PAGEVERSION (0x02) 1479 1480 #define MPI_SCSIPORTPAGE0_CAP_IU (0x00000001) 1481 #define MPI_SCSIPORTPAGE0_CAP_DT (0x00000002) 1482 #define MPI_SCSIPORTPAGE0_CAP_QAS (0x00000004) 1483 #define MPI_SCSIPORTPAGE0_CAP_MIN_SYNC_PERIOD_MASK (0x0000FF00) 1484 #define MPI_SCSIPORTPAGE0_SYNC_ASYNC (0x00) 1485 #define MPI_SCSIPORTPAGE0_SYNC_5 (0x32) 1486 #define MPI_SCSIPORTPAGE0_SYNC_10 (0x19) 1487 #define MPI_SCSIPORTPAGE0_SYNC_20 (0x0C) 1488 #define MPI_SCSIPORTPAGE0_SYNC_33_33 (0x0B) 1489 #define MPI_SCSIPORTPAGE0_SYNC_40 (0x0A) 1490 #define MPI_SCSIPORTPAGE0_SYNC_80 (0x09) 1491 #define MPI_SCSIPORTPAGE0_SYNC_160 (0x08) 1492 #define MPI_SCSIPORTPAGE0_SYNC_UNKNOWN (0xFF) 1493 1494 #define MPI_SCSIPORTPAGE0_CAP_SHIFT_MIN_SYNC_PERIOD (8) 1495 #define MPI_SCSIPORTPAGE0_CAP_GET_MIN_SYNC_PERIOD(Cap) \ 1496 ( ((Cap) & MPI_SCSIPORTPAGE0_CAP_MIN_SYNC_PERIOD_MASK) \ 1497 >> MPI_SCSIPORTPAGE0_CAP_SHIFT_MIN_SYNC_PERIOD \ 1498 ) 1499 #define MPI_SCSIPORTPAGE0_CAP_MAX_SYNC_OFFSET_MASK (0x00FF0000) 1500 #define MPI_SCSIPORTPAGE0_CAP_SHIFT_MAX_SYNC_OFFSET (16) 1501 #define MPI_SCSIPORTPAGE0_CAP_GET_MAX_SYNC_OFFSET(Cap) \ 1502 ( ((Cap) & MPI_SCSIPORTPAGE0_CAP_MAX_SYNC_OFFSET_MASK) \ 1503 >> MPI_SCSIPORTPAGE0_CAP_SHIFT_MAX_SYNC_OFFSET \ 1504 ) 1505 #define MPI_SCSIPORTPAGE0_CAP_IDP (0x08000000) 1506 #define MPI_SCSIPORTPAGE0_CAP_WIDE (0x20000000) 1507 #define MPI_SCSIPORTPAGE0_CAP_AIP (0x80000000) 1508 1509 #define MPI_SCSIPORTPAGE0_PHY_SIGNAL_TYPE_MASK (0x00000003) 1510 #define MPI_SCSIPORTPAGE0_PHY_SIGNAL_HVD (0x01) 1511 #define MPI_SCSIPORTPAGE0_PHY_SIGNAL_SE (0x02) 1512 #define MPI_SCSIPORTPAGE0_PHY_SIGNAL_LVD (0x03) 1513 #define MPI_SCSIPORTPAGE0_PHY_MASK_CONNECTED_ID (0xFF000000) 1514 #define MPI_SCSIPORTPAGE0_PHY_SHIFT_CONNECTED_ID (24) 1515 #define MPI_SCSIPORTPAGE0_PHY_BUS_FREE_CONNECTED_ID (0xFE) 1516 #define MPI_SCSIPORTPAGE0_PHY_UNKNOWN_CONNECTED_ID (0xFF) 1517 1518 1519 typedef struct _CONFIG_PAGE_SCSI_PORT_1 1520 { 1521 CONFIG_PAGE_HEADER Header; /* 00h */ 1522 U32 Configuration; /* 04h */ 1523 U32 OnBusTimerValue; /* 08h */ 1524 U8 TargetConfig; /* 0Ch */ 1525 U8 Reserved1; /* 0Dh */ 1526 U16 IDConfig; /* 0Eh */ 1527 } CONFIG_PAGE_SCSI_PORT_1, MPI_POINTER PTR_CONFIG_PAGE_SCSI_PORT_1, 1528 SCSIPortPage1_t, MPI_POINTER pSCSIPortPage1_t; 1529 1530 #define MPI_SCSIPORTPAGE1_PAGEVERSION (0x03) 1531 1532 /* Configuration values */ 1533 #define MPI_SCSIPORTPAGE1_CFG_PORT_SCSI_ID_MASK (0x000000FF) 1534 #define MPI_SCSIPORTPAGE1_CFG_PORT_RESPONSE_ID_MASK (0xFFFF0000) 1535 #define MPI_SCSIPORTPAGE1_CFG_SHIFT_PORT_RESPONSE_ID (16) 1536 1537 /* TargetConfig values */ 1538 #define MPI_SCSIPORTPAGE1_TARGCONFIG_TARG_ONLY (0x01) 1539 #define MPI_SCSIPORTPAGE1_TARGCONFIG_INIT_TARG (0x02) 1540 1541 1542 typedef struct _MPI_DEVICE_INFO 1543 { 1544 U8 Timeout; /* 00h */ 1545 U8 SyncFactor; /* 01h */ 1546 U16 DeviceFlags; /* 02h */ 1547 } MPI_DEVICE_INFO, MPI_POINTER PTR_MPI_DEVICE_INFO, 1548 MpiDeviceInfo_t, MPI_POINTER pMpiDeviceInfo_t; 1549 1550 typedef struct _CONFIG_PAGE_SCSI_PORT_2 1551 { 1552 CONFIG_PAGE_HEADER Header; /* 00h */ 1553 U32 PortFlags; /* 04h */ 1554 U32 PortSettings; /* 08h */ 1555 MPI_DEVICE_INFO DeviceSettings[16]; /* 0Ch */ 1556 } CONFIG_PAGE_SCSI_PORT_2, MPI_POINTER PTR_CONFIG_PAGE_SCSI_PORT_2, 1557 SCSIPortPage2_t, MPI_POINTER pSCSIPortPage2_t; 1558 1559 #define MPI_SCSIPORTPAGE2_PAGEVERSION (0x02) 1560 1561 /* PortFlags values */ 1562 #define MPI_SCSIPORTPAGE2_PORT_FLAGS_SCAN_HIGH_TO_LOW (0x00000001) 1563 #define MPI_SCSIPORTPAGE2_PORT_FLAGS_AVOID_SCSI_RESET (0x00000004) 1564 #define MPI_SCSIPORTPAGE2_PORT_FLAGS_ALTERNATE_CHS (0x00000008) 1565 #define MPI_SCSIPORTPAGE2_PORT_FLAGS_TERMINATION_DISABLE (0x00000010) 1566 1567 #define MPI_SCSIPORTPAGE2_PORT_FLAGS_DV_MASK (0x00000060) 1568 #define MPI_SCSIPORTPAGE2_PORT_FLAGS_FULL_DV (0x00000000) 1569 #define MPI_SCSIPORTPAGE2_PORT_FLAGS_BASIC_DV_ONLY (0x00000020) 1570 #define MPI_SCSIPORTPAGE2_PORT_FLAGS_OFF_DV (0x00000060) 1571 1572 1573 /* PortSettings values */ 1574 #define MPI_SCSIPORTPAGE2_PORT_HOST_ID_MASK (0x0000000F) 1575 #define MPI_SCSIPORTPAGE2_PORT_MASK_INIT_HBA (0x00000030) 1576 #define MPI_SCSIPORTPAGE2_PORT_DISABLE_INIT_HBA (0x00000000) 1577 #define MPI_SCSIPORTPAGE2_PORT_BIOS_INIT_HBA (0x00000010) 1578 #define MPI_SCSIPORTPAGE2_PORT_OS_INIT_HBA (0x00000020) 1579 #define MPI_SCSIPORTPAGE2_PORT_BIOS_OS_INIT_HBA (0x00000030) 1580 #define MPI_SCSIPORTPAGE2_PORT_REMOVABLE_MEDIA (0x000000C0) 1581 #define MPI_SCSIPORTPAGE2_PORT_RM_NONE (0x00000000) 1582 #define MPI_SCSIPORTPAGE2_PORT_RM_BOOT_ONLY (0x00000040) 1583 #define MPI_SCSIPORTPAGE2_PORT_RM_WITH_MEDIA (0x00000080) 1584 #define MPI_SCSIPORTPAGE2_PORT_SPINUP_DELAY_MASK (0x00000F00) 1585 #define MPI_SCSIPORTPAGE2_PORT_SHIFT_SPINUP_DELAY (8) 1586 #define MPI_SCSIPORTPAGE2_PORT_MASK_NEGO_MASTER_SETTINGS (0x00003000) 1587 #define MPI_SCSIPORTPAGE2_PORT_NEGO_MASTER_SETTINGS (0x00000000) 1588 #define MPI_SCSIPORTPAGE2_PORT_NONE_MASTER_SETTINGS (0x00001000) 1589 #define MPI_SCSIPORTPAGE2_PORT_ALL_MASTER_SETTINGS (0x00003000) 1590 1591 #define MPI_SCSIPORTPAGE2_DEVICE_DISCONNECT_ENABLE (0x0001) 1592 #define MPI_SCSIPORTPAGE2_DEVICE_ID_SCAN_ENABLE (0x0002) 1593 #define MPI_SCSIPORTPAGE2_DEVICE_LUN_SCAN_ENABLE (0x0004) 1594 #define MPI_SCSIPORTPAGE2_DEVICE_TAG_QUEUE_ENABLE (0x0008) 1595 #define MPI_SCSIPORTPAGE2_DEVICE_WIDE_DISABLE (0x0010) 1596 #define MPI_SCSIPORTPAGE2_DEVICE_BOOT_CHOICE (0x0020) 1597 1598 1599 /**************************************************************************** 1600 * SCSI Target Device Config Pages 1601 ****************************************************************************/ 1602 1603 typedef struct _CONFIG_PAGE_SCSI_DEVICE_0 1604 { 1605 CONFIG_PAGE_HEADER Header; /* 00h */ 1606 U32 NegotiatedParameters; /* 04h */ 1607 U32 Information; /* 08h */ 1608 } CONFIG_PAGE_SCSI_DEVICE_0, MPI_POINTER PTR_CONFIG_PAGE_SCSI_DEVICE_0, 1609 SCSIDevicePage0_t, MPI_POINTER pSCSIDevicePage0_t; 1610 1611 #define MPI_SCSIDEVPAGE0_PAGEVERSION (0x04) 1612 1613 #define MPI_SCSIDEVPAGE0_NP_IU (0x00000001) 1614 #define MPI_SCSIDEVPAGE0_NP_DT (0x00000002) 1615 #define MPI_SCSIDEVPAGE0_NP_QAS (0x00000004) 1616 #define MPI_SCSIDEVPAGE0_NP_HOLD_MCS (0x00000008) 1617 #define MPI_SCSIDEVPAGE0_NP_WR_FLOW (0x00000010) 1618 #define MPI_SCSIDEVPAGE0_NP_RD_STRM (0x00000020) 1619 #define MPI_SCSIDEVPAGE0_NP_RTI (0x00000040) 1620 #define MPI_SCSIDEVPAGE0_NP_PCOMP_EN (0x00000080) 1621 #define MPI_SCSIDEVPAGE0_NP_NEG_SYNC_PERIOD_MASK (0x0000FF00) 1622 #define MPI_SCSIDEVPAGE0_NP_SHIFT_SYNC_PERIOD (8) 1623 #define MPI_SCSIDEVPAGE0_NP_NEG_SYNC_OFFSET_MASK (0x00FF0000) 1624 #define MPI_SCSIDEVPAGE0_NP_SHIFT_SYNC_OFFSET (16) 1625 #define MPI_SCSIDEVPAGE0_NP_IDP (0x08000000) 1626 #define MPI_SCSIDEVPAGE0_NP_WIDE (0x20000000) 1627 #define MPI_SCSIDEVPAGE0_NP_AIP (0x80000000) 1628 1629 #define MPI_SCSIDEVPAGE0_INFO_PARAMS_NEGOTIATED (0x00000001) 1630 #define MPI_SCSIDEVPAGE0_INFO_SDTR_REJECTED (0x00000002) 1631 #define MPI_SCSIDEVPAGE0_INFO_WDTR_REJECTED (0x00000004) 1632 #define MPI_SCSIDEVPAGE0_INFO_PPR_REJECTED (0x00000008) 1633 1634 1635 typedef struct _CONFIG_PAGE_SCSI_DEVICE_1 1636 { 1637 CONFIG_PAGE_HEADER Header; /* 00h */ 1638 U32 RequestedParameters; /* 04h */ 1639 U32 Reserved; /* 08h */ 1640 U32 Configuration; /* 0Ch */ 1641 } CONFIG_PAGE_SCSI_DEVICE_1, MPI_POINTER PTR_CONFIG_PAGE_SCSI_DEVICE_1, 1642 SCSIDevicePage1_t, MPI_POINTER pSCSIDevicePage1_t; 1643 1644 #define MPI_SCSIDEVPAGE1_PAGEVERSION (0x05) 1645 1646 #define MPI_SCSIDEVPAGE1_RP_IU (0x00000001) 1647 #define MPI_SCSIDEVPAGE1_RP_DT (0x00000002) 1648 #define MPI_SCSIDEVPAGE1_RP_QAS (0x00000004) 1649 #define MPI_SCSIDEVPAGE1_RP_HOLD_MCS (0x00000008) 1650 #define MPI_SCSIDEVPAGE1_RP_WR_FLOW (0x00000010) 1651 #define MPI_SCSIDEVPAGE1_RP_RD_STRM (0x00000020) 1652 #define MPI_SCSIDEVPAGE1_RP_RTI (0x00000040) 1653 #define MPI_SCSIDEVPAGE1_RP_PCOMP_EN (0x00000080) 1654 #define MPI_SCSIDEVPAGE1_RP_MIN_SYNC_PERIOD_MASK (0x0000FF00) 1655 #define MPI_SCSIDEVPAGE1_RP_SHIFT_MIN_SYNC_PERIOD (8) 1656 #define MPI_SCSIDEVPAGE1_RP_MAX_SYNC_OFFSET_MASK (0x00FF0000) 1657 #define MPI_SCSIDEVPAGE1_RP_SHIFT_MAX_SYNC_OFFSET (16) 1658 #define MPI_SCSIDEVPAGE1_RP_IDP (0x08000000) 1659 #define MPI_SCSIDEVPAGE1_RP_WIDE (0x20000000) 1660 #define MPI_SCSIDEVPAGE1_RP_AIP (0x80000000) 1661 1662 #define MPI_SCSIDEVPAGE1_CONF_WDTR_DISALLOWED (0x00000002) 1663 #define MPI_SCSIDEVPAGE1_CONF_SDTR_DISALLOWED (0x00000004) 1664 #define MPI_SCSIDEVPAGE1_CONF_EXTENDED_PARAMS_ENABLE (0x00000008) 1665 #define MPI_SCSIDEVPAGE1_CONF_FORCE_PPR_MSG (0x00000010) 1666 1667 1668 typedef struct _CONFIG_PAGE_SCSI_DEVICE_2 1669 { 1670 CONFIG_PAGE_HEADER Header; /* 00h */ 1671 U32 DomainValidation; /* 04h */ 1672 U32 ParityPipeSelect; /* 08h */ 1673 U32 DataPipeSelect; /* 0Ch */ 1674 } CONFIG_PAGE_SCSI_DEVICE_2, MPI_POINTER PTR_CONFIG_PAGE_SCSI_DEVICE_2, 1675 SCSIDevicePage2_t, MPI_POINTER pSCSIDevicePage2_t; 1676 1677 #define MPI_SCSIDEVPAGE2_PAGEVERSION (0x01) 1678 1679 #define MPI_SCSIDEVPAGE2_DV_ISI_ENABLE (0x00000010) 1680 #define MPI_SCSIDEVPAGE2_DV_SECONDARY_DRIVER_ENABLE (0x00000020) 1681 #define MPI_SCSIDEVPAGE2_DV_SLEW_RATE_CTRL (0x00000380) 1682 #define MPI_SCSIDEVPAGE2_DV_PRIM_DRIVE_STR_CTRL (0x00001C00) 1683 #define MPI_SCSIDEVPAGE2_DV_SECOND_DRIVE_STR_CTRL (0x0000E000) 1684 #define MPI_SCSIDEVPAGE2_DV_XCLKH_ST (0x10000000) 1685 #define MPI_SCSIDEVPAGE2_DV_XCLKS_ST (0x20000000) 1686 #define MPI_SCSIDEVPAGE2_DV_XCLKH_DT (0x40000000) 1687 #define MPI_SCSIDEVPAGE2_DV_XCLKS_DT (0x80000000) 1688 1689 #define MPI_SCSIDEVPAGE2_PPS_PPS_MASK (0x00000003) 1690 1691 #define MPI_SCSIDEVPAGE2_DPS_BIT_0_PL_SELECT_MASK (0x00000003) 1692 #define MPI_SCSIDEVPAGE2_DPS_BIT_1_PL_SELECT_MASK (0x0000000C) 1693 #define MPI_SCSIDEVPAGE2_DPS_BIT_2_PL_SELECT_MASK (0x00000030) 1694 #define MPI_SCSIDEVPAGE2_DPS_BIT_3_PL_SELECT_MASK (0x000000C0) 1695 #define MPI_SCSIDEVPAGE2_DPS_BIT_4_PL_SELECT_MASK (0x00000300) 1696 #define MPI_SCSIDEVPAGE2_DPS_BIT_5_PL_SELECT_MASK (0x00000C00) 1697 #define MPI_SCSIDEVPAGE2_DPS_BIT_6_PL_SELECT_MASK (0x00003000) 1698 #define MPI_SCSIDEVPAGE2_DPS_BIT_7_PL_SELECT_MASK (0x0000C000) 1699 #define MPI_SCSIDEVPAGE2_DPS_BIT_8_PL_SELECT_MASK (0x00030000) 1700 #define MPI_SCSIDEVPAGE2_DPS_BIT_9_PL_SELECT_MASK (0x000C0000) 1701 #define MPI_SCSIDEVPAGE2_DPS_BIT_10_PL_SELECT_MASK (0x00300000) 1702 #define MPI_SCSIDEVPAGE2_DPS_BIT_11_PL_SELECT_MASK (0x00C00000) 1703 #define MPI_SCSIDEVPAGE2_DPS_BIT_12_PL_SELECT_MASK (0x03000000) 1704 #define MPI_SCSIDEVPAGE2_DPS_BIT_13_PL_SELECT_MASK (0x0C000000) 1705 #define MPI_SCSIDEVPAGE2_DPS_BIT_14_PL_SELECT_MASK (0x30000000) 1706 #define MPI_SCSIDEVPAGE2_DPS_BIT_15_PL_SELECT_MASK (0xC0000000) 1707 1708 1709 typedef struct _CONFIG_PAGE_SCSI_DEVICE_3 1710 { 1711 CONFIG_PAGE_HEADER Header; /* 00h */ 1712 U16 MsgRejectCount; /* 04h */ 1713 U16 PhaseErrorCount; /* 06h */ 1714 U16 ParityErrorCount; /* 08h */ 1715 U16 Reserved; /* 0Ah */ 1716 } CONFIG_PAGE_SCSI_DEVICE_3, MPI_POINTER PTR_CONFIG_PAGE_SCSI_DEVICE_3, 1717 SCSIDevicePage3_t, MPI_POINTER pSCSIDevicePage3_t; 1718 1719 #define MPI_SCSIDEVPAGE3_PAGEVERSION (0x00) 1720 1721 #define MPI_SCSIDEVPAGE3_MAX_COUNTER (0xFFFE) 1722 #define MPI_SCSIDEVPAGE3_UNSUPPORTED_COUNTER (0xFFFF) 1723 1724 1725 /**************************************************************************** 1726 * FC Port Config Pages 1727 ****************************************************************************/ 1728 1729 typedef struct _CONFIG_PAGE_FC_PORT_0 1730 { 1731 CONFIG_PAGE_HEADER Header; /* 00h */ 1732 U32 Flags; /* 04h */ 1733 U8 MPIPortNumber; /* 08h */ 1734 U8 LinkType; /* 09h */ 1735 U8 PortState; /* 0Ah */ 1736 U8 Reserved; /* 0Bh */ 1737 U32 PortIdentifier; /* 0Ch */ 1738 U64 WWNN; /* 10h */ 1739 U64 WWPN; /* 18h */ 1740 U32 SupportedServiceClass; /* 20h */ 1741 U32 SupportedSpeeds; /* 24h */ 1742 U32 CurrentSpeed; /* 28h */ 1743 U32 MaxFrameSize; /* 2Ch */ 1744 U64 FabricWWNN; /* 30h */ 1745 U64 FabricWWPN; /* 38h */ 1746 U32 DiscoveredPortsCount; /* 40h */ 1747 U32 MaxInitiators; /* 44h */ 1748 U8 MaxAliasesSupported; /* 48h */ 1749 U8 MaxHardAliasesSupported; /* 49h */ 1750 U8 NumCurrentAliases; /* 4Ah */ 1751 U8 Reserved1; /* 4Bh */ 1752 } CONFIG_PAGE_FC_PORT_0, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_0, 1753 FCPortPage0_t, MPI_POINTER pFCPortPage0_t; 1754 1755 #define MPI_FCPORTPAGE0_PAGEVERSION (0x02) 1756 1757 #define MPI_FCPORTPAGE0_FLAGS_PROT_MASK (0x0000000F) 1758 #define MPI_FCPORTPAGE0_FLAGS_PROT_FCP_INIT (MPI_PORTFACTS_PROTOCOL_INITIATOR) 1759 #define MPI_FCPORTPAGE0_FLAGS_PROT_FCP_TARG (MPI_PORTFACTS_PROTOCOL_TARGET) 1760 #define MPI_FCPORTPAGE0_FLAGS_PROT_LAN (MPI_PORTFACTS_PROTOCOL_LAN) 1761 #define MPI_FCPORTPAGE0_FLAGS_PROT_LOGBUSADDR (MPI_PORTFACTS_PROTOCOL_LOGBUSADDR) 1762 1763 #define MPI_FCPORTPAGE0_FLAGS_ALIAS_ALPA_SUPPORTED (0x00000010) 1764 #define MPI_FCPORTPAGE0_FLAGS_ALIAS_WWN_SUPPORTED (0x00000020) 1765 #define MPI_FCPORTPAGE0_FLAGS_FABRIC_WWN_VALID (0x00000040) 1766 1767 #define MPI_FCPORTPAGE0_FLAGS_ATTACH_TYPE_MASK (0x00000F00) 1768 #define MPI_FCPORTPAGE0_FLAGS_ATTACH_NO_INIT (0x00000000) 1769 #define MPI_FCPORTPAGE0_FLAGS_ATTACH_POINT_TO_POINT (0x00000100) 1770 #define MPI_FCPORTPAGE0_FLAGS_ATTACH_PRIVATE_LOOP (0x00000200) 1771 #define MPI_FCPORTPAGE0_FLAGS_ATTACH_FABRIC_DIRECT (0x00000400) 1772 #define MPI_FCPORTPAGE0_FLAGS_ATTACH_PUBLIC_LOOP (0x00000800) 1773 1774 #define MPI_FCPORTPAGE0_LTYPE_RESERVED (0x00) 1775 #define MPI_FCPORTPAGE0_LTYPE_OTHER (0x01) 1776 #define MPI_FCPORTPAGE0_LTYPE_UNKNOWN (0x02) 1777 #define MPI_FCPORTPAGE0_LTYPE_COPPER (0x03) 1778 #define MPI_FCPORTPAGE0_LTYPE_SINGLE_1300 (0x04) 1779 #define MPI_FCPORTPAGE0_LTYPE_SINGLE_1500 (0x05) 1780 #define MPI_FCPORTPAGE0_LTYPE_50_LASER_MULTI (0x06) 1781 #define MPI_FCPORTPAGE0_LTYPE_50_LED_MULTI (0x07) 1782 #define MPI_FCPORTPAGE0_LTYPE_62_LASER_MULTI (0x08) 1783 #define MPI_FCPORTPAGE0_LTYPE_62_LED_MULTI (0x09) 1784 #define MPI_FCPORTPAGE0_LTYPE_MULTI_LONG_WAVE (0x0A) 1785 #define MPI_FCPORTPAGE0_LTYPE_MULTI_SHORT_WAVE (0x0B) 1786 #define MPI_FCPORTPAGE0_LTYPE_LASER_SHORT_WAVE (0x0C) 1787 #define MPI_FCPORTPAGE0_LTYPE_LED_SHORT_WAVE (0x0D) 1788 #define MPI_FCPORTPAGE0_LTYPE_1300_LONG_WAVE (0x0E) 1789 #define MPI_FCPORTPAGE0_LTYPE_1500_LONG_WAVE (0x0F) 1790 1791 #define MPI_FCPORTPAGE0_PORTSTATE_UNKNOWN (0x01) /*(SNIA)HBA_PORTSTATE_UNKNOWN 1 Unknown */ 1792 #define MPI_FCPORTPAGE0_PORTSTATE_ONLINE (0x02) /*(SNIA)HBA_PORTSTATE_ONLINE 2 Operational */ 1793 #define MPI_FCPORTPAGE0_PORTSTATE_OFFLINE (0x03) /*(SNIA)HBA_PORTSTATE_OFFLINE 3 User Offline */ 1794 #define MPI_FCPORTPAGE0_PORTSTATE_BYPASSED (0x04) /*(SNIA)HBA_PORTSTATE_BYPASSED 4 Bypassed */ 1795 #define MPI_FCPORTPAGE0_PORTSTATE_DIAGNOST (0x05) /*(SNIA)HBA_PORTSTATE_DIAGNOSTICS 5 In diagnostics mode */ 1796 #define MPI_FCPORTPAGE0_PORTSTATE_LINKDOWN (0x06) /*(SNIA)HBA_PORTSTATE_LINKDOWN 6 Link Down */ 1797 #define MPI_FCPORTPAGE0_PORTSTATE_ERROR (0x07) /*(SNIA)HBA_PORTSTATE_ERROR 7 Port Error */ 1798 #define MPI_FCPORTPAGE0_PORTSTATE_LOOPBACK (0x08) /*(SNIA)HBA_PORTSTATE_LOOPBACK 8 Loopback */ 1799 1800 #define MPI_FCPORTPAGE0_SUPPORT_CLASS_1 (0x00000001) 1801 #define MPI_FCPORTPAGE0_SUPPORT_CLASS_2 (0x00000002) 1802 #define MPI_FCPORTPAGE0_SUPPORT_CLASS_3 (0x00000004) 1803 1804 #define MPI_FCPORTPAGE0_SUPPORT_SPEED_UKNOWN (0x00000000) /* (SNIA)HBA_PORTSPEED_UNKNOWN 0 Unknown - transceiver incapable of reporting */ 1805 #define MPI_FCPORTPAGE0_SUPPORT_1GBIT_SPEED (0x00000001) /* (SNIA)HBA_PORTSPEED_1GBIT 1 1 GBit/sec */ 1806 #define MPI_FCPORTPAGE0_SUPPORT_2GBIT_SPEED (0x00000002) /* (SNIA)HBA_PORTSPEED_2GBIT 2 2 GBit/sec */ 1807 #define MPI_FCPORTPAGE0_SUPPORT_10GBIT_SPEED (0x00000004) /* (SNIA)HBA_PORTSPEED_10GBIT 4 10 GBit/sec */ 1808 #define MPI_FCPORTPAGE0_SUPPORT_4GBIT_SPEED (0x00000008) /* (SNIA)HBA_PORTSPEED_4GBIT 8 4 GBit/sec */ 1809 1810 #define MPI_FCPORTPAGE0_CURRENT_SPEED_UKNOWN MPI_FCPORTPAGE0_SUPPORT_SPEED_UKNOWN 1811 #define MPI_FCPORTPAGE0_CURRENT_SPEED_1GBIT MPI_FCPORTPAGE0_SUPPORT_1GBIT_SPEED 1812 #define MPI_FCPORTPAGE0_CURRENT_SPEED_2GBIT MPI_FCPORTPAGE0_SUPPORT_2GBIT_SPEED 1813 #define MPI_FCPORTPAGE0_CURRENT_SPEED_10GBIT MPI_FCPORTPAGE0_SUPPORT_10GBIT_SPEED 1814 #define MPI_FCPORTPAGE0_CURRENT_SPEED_4GBIT MPI_FCPORTPAGE0_SUPPORT_4GBIT_SPEED 1815 #define MPI_FCPORTPAGE0_CURRENT_SPEED_NOT_NEGOTIATED (0x00008000) /* (SNIA)HBA_PORTSPEED_NOT_NEGOTIATED (1<<15) Speed not established */ 1816 1817 1818 typedef struct _CONFIG_PAGE_FC_PORT_1 1819 { 1820 CONFIG_PAGE_HEADER Header; /* 00h */ 1821 U32 Flags; /* 04h */ 1822 U64 NoSEEPROMWWNN; /* 08h */ 1823 U64 NoSEEPROMWWPN; /* 10h */ 1824 U8 HardALPA; /* 18h */ 1825 U8 LinkConfig; /* 19h */ 1826 U8 TopologyConfig; /* 1Ah */ 1827 U8 AltConnector; /* 1Bh */ 1828 U8 NumRequestedAliases; /* 1Ch */ 1829 U8 RR_TOV; /* 1Dh */ 1830 U8 InitiatorDeviceTimeout; /* 1Eh */ 1831 U8 InitiatorIoPendTimeout; /* 1Fh */ 1832 } CONFIG_PAGE_FC_PORT_1, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_1, 1833 FCPortPage1_t, MPI_POINTER pFCPortPage1_t; 1834 1835 #define MPI_FCPORTPAGE1_PAGEVERSION (0x06) 1836 1837 #define MPI_FCPORTPAGE1_FLAGS_EXT_FCP_STATUS_EN (0x08000000) 1838 #define MPI_FCPORTPAGE1_FLAGS_IMMEDIATE_ERROR_REPLY (0x04000000) 1839 #define MPI_FCPORTPAGE1_FLAGS_FORCE_USE_NOSEEPROM_WWNS (0x02000000) 1840 #define MPI_FCPORTPAGE1_FLAGS_VERBOSE_RESCAN_EVENTS (0x01000000) 1841 #define MPI_FCPORTPAGE1_FLAGS_TARGET_MODE_OXID (0x00800000) 1842 #define MPI_FCPORTPAGE1_FLAGS_PORT_OFFLINE (0x00400000) 1843 #define MPI_FCPORTPAGE1_FLAGS_SOFT_ALPA_FALLBACK (0x00200000) 1844 #define MPI_FCPORTPAGE1_FLAGS_TARGET_LARGE_CDB_ENABLE (0x00000080) 1845 #define MPI_FCPORTPAGE1_FLAGS_MASK_RR_TOV_UNITS (0x00000070) 1846 #define MPI_FCPORTPAGE1_FLAGS_SUPPRESS_PROT_REG (0x00000008) 1847 #define MPI_FCPORTPAGE1_FLAGS_PLOGI_ON_LOGO (0x00000004) 1848 #define MPI_FCPORTPAGE1_FLAGS_MAINTAIN_LOGINS (0x00000002) 1849 #define MPI_FCPORTPAGE1_FLAGS_SORT_BY_DID (0x00000001) 1850 #define MPI_FCPORTPAGE1_FLAGS_SORT_BY_WWN (0x00000000) 1851 1852 #define MPI_FCPORTPAGE1_FLAGS_PROT_MASK (0xF0000000) 1853 #define MPI_FCPORTPAGE1_FLAGS_PROT_SHIFT (28) 1854 #define MPI_FCPORTPAGE1_FLAGS_PROT_FCP_INIT ((U32)MPI_PORTFACTS_PROTOCOL_INITIATOR << MPI_FCPORTPAGE1_FLAGS_PROT_SHIFT) 1855 #define MPI_FCPORTPAGE1_FLAGS_PROT_FCP_TARG ((U32)MPI_PORTFACTS_PROTOCOL_TARGET << MPI_FCPORTPAGE1_FLAGS_PROT_SHIFT) 1856 #define MPI_FCPORTPAGE1_FLAGS_PROT_LAN ((U32)MPI_PORTFACTS_PROTOCOL_LAN << MPI_FCPORTPAGE1_FLAGS_PROT_SHIFT) 1857 #define MPI_FCPORTPAGE1_FLAGS_PROT_LOGBUSADDR ((U32)MPI_PORTFACTS_PROTOCOL_LOGBUSADDR << MPI_FCPORTPAGE1_FLAGS_PROT_SHIFT) 1858 1859 #define MPI_FCPORTPAGE1_FLAGS_NONE_RR_TOV_UNITS (0x00000000) 1860 #define MPI_FCPORTPAGE1_FLAGS_THOUSANDTH_RR_TOV_UNITS (0x00000010) 1861 #define MPI_FCPORTPAGE1_FLAGS_TENTH_RR_TOV_UNITS (0x00000030) 1862 #define MPI_FCPORTPAGE1_FLAGS_TEN_RR_TOV_UNITS (0x00000050) 1863 1864 #define MPI_FCPORTPAGE1_HARD_ALPA_NOT_USED (0xFF) 1865 1866 #define MPI_FCPORTPAGE1_LCONFIG_SPEED_MASK (0x0F) 1867 #define MPI_FCPORTPAGE1_LCONFIG_SPEED_1GIG (0x00) 1868 #define MPI_FCPORTPAGE1_LCONFIG_SPEED_2GIG (0x01) 1869 #define MPI_FCPORTPAGE1_LCONFIG_SPEED_4GIG (0x02) 1870 #define MPI_FCPORTPAGE1_LCONFIG_SPEED_10GIG (0x03) 1871 #define MPI_FCPORTPAGE1_LCONFIG_SPEED_AUTO (0x0F) 1872 1873 #define MPI_FCPORTPAGE1_TOPOLOGY_MASK (0x0F) 1874 #define MPI_FCPORTPAGE1_TOPOLOGY_NLPORT (0x01) 1875 #define MPI_FCPORTPAGE1_TOPOLOGY_NPORT (0x02) 1876 #define MPI_FCPORTPAGE1_TOPOLOGY_AUTO (0x0F) 1877 1878 #define MPI_FCPORTPAGE1_ALT_CONN_UNKNOWN (0x00) 1879 1880 #define MPI_FCPORTPAGE1_INITIATOR_DEV_TIMEOUT_MASK (0x7F) 1881 #define MPI_FCPORTPAGE1_INITIATOR_DEV_UNIT_16 (0x80) 1882 1883 1884 typedef struct _CONFIG_PAGE_FC_PORT_2 1885 { 1886 CONFIG_PAGE_HEADER Header; /* 00h */ 1887 U8 NumberActive; /* 04h */ 1888 U8 ALPA[127]; /* 05h */ 1889 } CONFIG_PAGE_FC_PORT_2, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_2, 1890 FCPortPage2_t, MPI_POINTER pFCPortPage2_t; 1891 1892 #define MPI_FCPORTPAGE2_PAGEVERSION (0x01) 1893 1894 1895 typedef struct _WWN_FORMAT 1896 { 1897 U64 WWNN; /* 00h */ 1898 U64 WWPN; /* 08h */ 1899 } WWN_FORMAT, MPI_POINTER PTR_WWN_FORMAT, 1900 WWNFormat, MPI_POINTER pWWNFormat; 1901 1902 typedef union _FC_PORT_PERSISTENT_PHYSICAL_ID 1903 { 1904 WWN_FORMAT WWN; 1905 U32 Did; 1906 } FC_PORT_PERSISTENT_PHYSICAL_ID, MPI_POINTER PTR_FC_PORT_PERSISTENT_PHYSICAL_ID, 1907 PersistentPhysicalId_t, MPI_POINTER pPersistentPhysicalId_t; 1908 1909 typedef struct _FC_PORT_PERSISTENT 1910 { 1911 FC_PORT_PERSISTENT_PHYSICAL_ID PhysicalIdentifier; /* 00h */ 1912 U8 TargetID; /* 10h */ 1913 U8 Bus; /* 11h */ 1914 U16 Flags; /* 12h */ 1915 } FC_PORT_PERSISTENT, MPI_POINTER PTR_FC_PORT_PERSISTENT, 1916 PersistentData_t, MPI_POINTER pPersistentData_t; 1917 1918 #define MPI_PERSISTENT_FLAGS_SHIFT (16) 1919 #define MPI_PERSISTENT_FLAGS_ENTRY_VALID (0x0001) 1920 #define MPI_PERSISTENT_FLAGS_SCAN_ID (0x0002) 1921 #define MPI_PERSISTENT_FLAGS_SCAN_LUNS (0x0004) 1922 #define MPI_PERSISTENT_FLAGS_BOOT_DEVICE (0x0008) 1923 #define MPI_PERSISTENT_FLAGS_BY_DID (0x0080) 1924 1925 /* 1926 * Host code (drivers, BIOS, utilities, etc.) should leave this define set to 1927 * one and check Header.PageLength at runtime. 1928 */ 1929 #ifndef MPI_FC_PORT_PAGE_3_ENTRY_MAX 1930 #define MPI_FC_PORT_PAGE_3_ENTRY_MAX (1) 1931 #endif 1932 1933 typedef struct _CONFIG_PAGE_FC_PORT_3 1934 { 1935 CONFIG_PAGE_HEADER Header; /* 00h */ 1936 FC_PORT_PERSISTENT Entry[MPI_FC_PORT_PAGE_3_ENTRY_MAX]; /* 04h */ 1937 } CONFIG_PAGE_FC_PORT_3, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_3, 1938 FCPortPage3_t, MPI_POINTER pFCPortPage3_t; 1939 1940 #define MPI_FCPORTPAGE3_PAGEVERSION (0x01) 1941 1942 1943 typedef struct _CONFIG_PAGE_FC_PORT_4 1944 { 1945 CONFIG_PAGE_HEADER Header; /* 00h */ 1946 U32 PortFlags; /* 04h */ 1947 U32 PortSettings; /* 08h */ 1948 } CONFIG_PAGE_FC_PORT_4, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_4, 1949 FCPortPage4_t, MPI_POINTER pFCPortPage4_t; 1950 1951 #define MPI_FCPORTPAGE4_PAGEVERSION (0x00) 1952 1953 #define MPI_FCPORTPAGE4_PORT_FLAGS_ALTERNATE_CHS (0x00000008) 1954 1955 #define MPI_FCPORTPAGE4_PORT_MASK_INIT_HBA (0x00000030) 1956 #define MPI_FCPORTPAGE4_PORT_DISABLE_INIT_HBA (0x00000000) 1957 #define MPI_FCPORTPAGE4_PORT_BIOS_INIT_HBA (0x00000010) 1958 #define MPI_FCPORTPAGE4_PORT_OS_INIT_HBA (0x00000020) 1959 #define MPI_FCPORTPAGE4_PORT_BIOS_OS_INIT_HBA (0x00000030) 1960 #define MPI_FCPORTPAGE4_PORT_REMOVABLE_MEDIA (0x000000C0) 1961 #define MPI_FCPORTPAGE4_PORT_SPINUP_DELAY_MASK (0x00000F00) 1962 1963 1964 typedef struct _CONFIG_PAGE_FC_PORT_5_ALIAS_INFO 1965 { 1966 U8 Flags; /* 00h */ 1967 U8 AliasAlpa; /* 01h */ 1968 U16 Reserved; /* 02h */ 1969 U64 AliasWWNN; /* 04h */ 1970 U64 AliasWWPN; /* 0Ch */ 1971 } CONFIG_PAGE_FC_PORT_5_ALIAS_INFO, 1972 MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_5_ALIAS_INFO, 1973 FcPortPage5AliasInfo_t, MPI_POINTER pFcPortPage5AliasInfo_t; 1974 1975 typedef struct _CONFIG_PAGE_FC_PORT_5 1976 { 1977 CONFIG_PAGE_HEADER Header; /* 00h */ 1978 CONFIG_PAGE_FC_PORT_5_ALIAS_INFO AliasInfo; /* 04h */ 1979 } CONFIG_PAGE_FC_PORT_5, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_5, 1980 FCPortPage5_t, MPI_POINTER pFCPortPage5_t; 1981 1982 #define MPI_FCPORTPAGE5_PAGEVERSION (0x02) 1983 1984 #define MPI_FCPORTPAGE5_FLAGS_ALPA_ACQUIRED (0x01) 1985 #define MPI_FCPORTPAGE5_FLAGS_HARD_ALPA (0x02) 1986 #define MPI_FCPORTPAGE5_FLAGS_HARD_WWNN (0x04) 1987 #define MPI_FCPORTPAGE5_FLAGS_HARD_WWPN (0x08) 1988 #define MPI_FCPORTPAGE5_FLAGS_DISABLE (0x10) 1989 1990 typedef struct _CONFIG_PAGE_FC_PORT_6 1991 { 1992 CONFIG_PAGE_HEADER Header; /* 00h */ 1993 U32 Reserved; /* 04h */ 1994 U64 TimeSinceReset; /* 08h */ 1995 U64 TxFrames; /* 10h */ 1996 U64 RxFrames; /* 18h */ 1997 U64 TxWords; /* 20h */ 1998 U64 RxWords; /* 28h */ 1999 U64 LipCount; /* 30h */ 2000 U64 NosCount; /* 38h */ 2001 U64 ErrorFrames; /* 40h */ 2002 U64 DumpedFrames; /* 48h */ 2003 U64 LinkFailureCount; /* 50h */ 2004 U64 LossOfSyncCount; /* 58h */ 2005 U64 LossOfSignalCount; /* 60h */ 2006 U64 PrimativeSeqErrCount; /* 68h */ 2007 U64 InvalidTxWordCount; /* 70h */ 2008 U64 InvalidCrcCount; /* 78h */ 2009 U64 FcpInitiatorIoCount; /* 80h */ 2010 } CONFIG_PAGE_FC_PORT_6, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_6, 2011 FCPortPage6_t, MPI_POINTER pFCPortPage6_t; 2012 2013 #define MPI_FCPORTPAGE6_PAGEVERSION (0x00) 2014 2015 2016 typedef struct _CONFIG_PAGE_FC_PORT_7 2017 { 2018 CONFIG_PAGE_HEADER Header; /* 00h */ 2019 U32 Reserved; /* 04h */ 2020 U8 PortSymbolicName[256]; /* 08h */ 2021 } CONFIG_PAGE_FC_PORT_7, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_7, 2022 FCPortPage7_t, MPI_POINTER pFCPortPage7_t; 2023 2024 #define MPI_FCPORTPAGE7_PAGEVERSION (0x00) 2025 2026 2027 typedef struct _CONFIG_PAGE_FC_PORT_8 2028 { 2029 CONFIG_PAGE_HEADER Header; /* 00h */ 2030 U32 BitVector[8]; /* 04h */ 2031 } CONFIG_PAGE_FC_PORT_8, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_8, 2032 FCPortPage8_t, MPI_POINTER pFCPortPage8_t; 2033 2034 #define MPI_FCPORTPAGE8_PAGEVERSION (0x00) 2035 2036 2037 typedef struct _CONFIG_PAGE_FC_PORT_9 2038 { 2039 CONFIG_PAGE_HEADER Header; /* 00h */ 2040 U32 Reserved; /* 04h */ 2041 U64 GlobalWWPN; /* 08h */ 2042 U64 GlobalWWNN; /* 10h */ 2043 U32 UnitType; /* 18h */ 2044 U32 PhysicalPortNumber; /* 1Ch */ 2045 U32 NumAttachedNodes; /* 20h */ 2046 U16 IPVersion; /* 24h */ 2047 U16 UDPPortNumber; /* 26h */ 2048 U8 IPAddress[16]; /* 28h */ 2049 U16 Reserved1; /* 38h */ 2050 U16 TopologyDiscoveryFlags; /* 3Ah */ 2051 } CONFIG_PAGE_FC_PORT_9, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_9, 2052 FCPortPage9_t, MPI_POINTER pFCPortPage9_t; 2053 2054 #define MPI_FCPORTPAGE9_PAGEVERSION (0x00) 2055 2056 2057 typedef struct _CONFIG_PAGE_FC_PORT_10_BASE_SFP_DATA 2058 { 2059 U8 Id; /* 10h */ 2060 U8 ExtId; /* 11h */ 2061 U8 Connector; /* 12h */ 2062 U8 Transceiver[8]; /* 13h */ 2063 U8 Encoding; /* 1Bh */ 2064 U8 BitRate_100mbs; /* 1Ch */ 2065 U8 Reserved1; /* 1Dh */ 2066 U8 Length9u_km; /* 1Eh */ 2067 U8 Length9u_100m; /* 1Fh */ 2068 U8 Length50u_10m; /* 20h */ 2069 U8 Length62p5u_10m; /* 21h */ 2070 U8 LengthCopper_m; /* 22h */ 2071 U8 Reseverved2; /* 22h */ 2072 U8 VendorName[16]; /* 24h */ 2073 U8 Reserved3; /* 34h */ 2074 U8 VendorOUI[3]; /* 35h */ 2075 U8 VendorPN[16]; /* 38h */ 2076 U8 VendorRev[4]; /* 48h */ 2077 U16 Wavelength; /* 4Ch */ 2078 U8 Reserved4; /* 4Eh */ 2079 U8 CC_BASE; /* 4Fh */ 2080 } CONFIG_PAGE_FC_PORT_10_BASE_SFP_DATA, 2081 MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_10_BASE_SFP_DATA, 2082 FCPortPage10BaseSfpData_t, MPI_POINTER pFCPortPage10BaseSfpData_t; 2083 2084 #define MPI_FCPORT10_BASE_ID_UNKNOWN (0x00) 2085 #define MPI_FCPORT10_BASE_ID_GBIC (0x01) 2086 #define MPI_FCPORT10_BASE_ID_FIXED (0x02) 2087 #define MPI_FCPORT10_BASE_ID_SFP (0x03) 2088 #define MPI_FCPORT10_BASE_ID_SFP_MIN (0x04) 2089 #define MPI_FCPORT10_BASE_ID_SFP_MAX (0x7F) 2090 #define MPI_FCPORT10_BASE_ID_VEND_SPEC_MASK (0x80) 2091 2092 #define MPI_FCPORT10_BASE_EXTID_UNKNOWN (0x00) 2093 #define MPI_FCPORT10_BASE_EXTID_MODDEF1 (0x01) 2094 #define MPI_FCPORT10_BASE_EXTID_MODDEF2 (0x02) 2095 #define MPI_FCPORT10_BASE_EXTID_MODDEF3 (0x03) 2096 #define MPI_FCPORT10_BASE_EXTID_SEEPROM (0x04) 2097 #define MPI_FCPORT10_BASE_EXTID_MODDEF5 (0x05) 2098 #define MPI_FCPORT10_BASE_EXTID_MODDEF6 (0x06) 2099 #define MPI_FCPORT10_BASE_EXTID_MODDEF7 (0x07) 2100 #define MPI_FCPORT10_BASE_EXTID_VNDSPC_MASK (0x80) 2101 2102 #define MPI_FCPORT10_BASE_CONN_UNKNOWN (0x00) 2103 #define MPI_FCPORT10_BASE_CONN_SC (0x01) 2104 #define MPI_FCPORT10_BASE_CONN_COPPER1 (0x02) 2105 #define MPI_FCPORT10_BASE_CONN_COPPER2 (0x03) 2106 #define MPI_FCPORT10_BASE_CONN_BNC_TNC (0x04) 2107 #define MPI_FCPORT10_BASE_CONN_COAXIAL (0x05) 2108 #define MPI_FCPORT10_BASE_CONN_FIBERJACK (0x06) 2109 #define MPI_FCPORT10_BASE_CONN_LC (0x07) 2110 #define MPI_FCPORT10_BASE_CONN_MT_RJ (0x08) 2111 #define MPI_FCPORT10_BASE_CONN_MU (0x09) 2112 #define MPI_FCPORT10_BASE_CONN_SG (0x0A) 2113 #define MPI_FCPORT10_BASE_CONN_OPT_PIGT (0x0B) 2114 #define MPI_FCPORT10_BASE_CONN_RSV1_MIN (0x0C) 2115 #define MPI_FCPORT10_BASE_CONN_RSV1_MAX (0x1F) 2116 #define MPI_FCPORT10_BASE_CONN_HSSDC_II (0x20) 2117 #define MPI_FCPORT10_BASE_CONN_CPR_PIGT (0x21) 2118 #define MPI_FCPORT10_BASE_CONN_RSV2_MIN (0x22) 2119 #define MPI_FCPORT10_BASE_CONN_RSV2_MAX (0x7F) 2120 #define MPI_FCPORT10_BASE_CONN_VNDSPC_MASK (0x80) 2121 2122 #define MPI_FCPORT10_BASE_ENCODE_UNSPEC (0x00) 2123 #define MPI_FCPORT10_BASE_ENCODE_8B10B (0x01) 2124 #define MPI_FCPORT10_BASE_ENCODE_4B5B (0x02) 2125 #define MPI_FCPORT10_BASE_ENCODE_NRZ (0x03) 2126 #define MPI_FCPORT10_BASE_ENCODE_MANCHESTER (0x04) 2127 2128 2129 typedef struct _CONFIG_PAGE_FC_PORT_10_EXTENDED_SFP_DATA 2130 { 2131 U8 Options[2]; /* 50h */ 2132 U8 BitRateMax; /* 52h */ 2133 U8 BitRateMin; /* 53h */ 2134 U8 VendorSN[16]; /* 54h */ 2135 U8 DateCode[8]; /* 64h */ 2136 U8 DiagMonitoringType; /* 6Ch */ 2137 U8 EnhancedOptions; /* 6Dh */ 2138 U8 SFF8472Compliance; /* 6Eh */ 2139 U8 CC_EXT; /* 6Fh */ 2140 } CONFIG_PAGE_FC_PORT_10_EXTENDED_SFP_DATA, 2141 MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_10_EXTENDED_SFP_DATA, 2142 FCPortPage10ExtendedSfpData_t, MPI_POINTER pFCPortPage10ExtendedSfpData_t; 2143 2144 #define MPI_FCPORT10_EXT_OPTION1_RATESEL (0x20) 2145 #define MPI_FCPORT10_EXT_OPTION1_TX_DISABLE (0x10) 2146 #define MPI_FCPORT10_EXT_OPTION1_TX_FAULT (0x08) 2147 #define MPI_FCPORT10_EXT_OPTION1_LOS_INVERT (0x04) 2148 #define MPI_FCPORT10_EXT_OPTION1_LOS (0x02) 2149 2150 2151 typedef struct _CONFIG_PAGE_FC_PORT_10 2152 { 2153 CONFIG_PAGE_HEADER Header; /* 00h */ 2154 U8 Flags; /* 04h */ 2155 U8 Reserved1; /* 05h */ 2156 U16 Reserved2; /* 06h */ 2157 U32 HwConfig1; /* 08h */ 2158 U32 HwConfig2; /* 0Ch */ 2159 CONFIG_PAGE_FC_PORT_10_BASE_SFP_DATA Base; /* 10h */ 2160 CONFIG_PAGE_FC_PORT_10_EXTENDED_SFP_DATA Extended; /* 50h */ 2161 U8 VendorSpecific[32]; /* 70h */ 2162 } CONFIG_PAGE_FC_PORT_10, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_10, 2163 FCPortPage10_t, MPI_POINTER pFCPortPage10_t; 2164 2165 #define MPI_FCPORTPAGE10_PAGEVERSION (0x01) 2166 2167 /* standard MODDEF pin definitions (from GBIC spec.) */ 2168 #define MPI_FCPORTPAGE10_FLAGS_MODDEF_MASK (0x00000007) 2169 #define MPI_FCPORTPAGE10_FLAGS_MODDEF2 (0x00000001) 2170 #define MPI_FCPORTPAGE10_FLAGS_MODDEF1 (0x00000002) 2171 #define MPI_FCPORTPAGE10_FLAGS_MODDEF0 (0x00000004) 2172 #define MPI_FCPORTPAGE10_FLAGS_MODDEF_NOGBIC (0x00000007) 2173 #define MPI_FCPORTPAGE10_FLAGS_MODDEF_CPR_IEEE_CX (0x00000006) 2174 #define MPI_FCPORTPAGE10_FLAGS_MODDEF_COPPER (0x00000005) 2175 #define MPI_FCPORTPAGE10_FLAGS_MODDEF_OPTICAL_LW (0x00000004) 2176 #define MPI_FCPORTPAGE10_FLAGS_MODDEF_SEEPROM (0x00000003) 2177 #define MPI_FCPORTPAGE10_FLAGS_MODDEF_SW_OPTICAL (0x00000002) 2178 #define MPI_FCPORTPAGE10_FLAGS_MODDEF_LX_IEEE_OPT_LW (0x00000001) 2179 #define MPI_FCPORTPAGE10_FLAGS_MODDEF_SX_IEEE_OPT_SW (0x00000000) 2180 2181 #define MPI_FCPORTPAGE10_FLAGS_CC_BASE_OK (0x00000010) 2182 #define MPI_FCPORTPAGE10_FLAGS_CC_EXT_OK (0x00000020) 2183 2184 2185 /**************************************************************************** 2186 * FC Device Config Pages 2187 ****************************************************************************/ 2188 2189 typedef struct _CONFIG_PAGE_FC_DEVICE_0 2190 { 2191 CONFIG_PAGE_HEADER Header; /* 00h */ 2192 U64 WWNN; /* 04h */ 2193 U64 WWPN; /* 0Ch */ 2194 U32 PortIdentifier; /* 14h */ 2195 U8 Protocol; /* 18h */ 2196 U8 Flags; /* 19h */ 2197 U16 BBCredit; /* 1Ah */ 2198 U16 MaxRxFrameSize; /* 1Ch */ 2199 U8 ADISCHardALPA; /* 1Eh */ 2200 U8 PortNumber; /* 1Fh */ 2201 U8 FcPhLowestVersion; /* 20h */ 2202 U8 FcPhHighestVersion; /* 21h */ 2203 U8 CurrentTargetID; /* 22h */ 2204 U8 CurrentBus; /* 23h */ 2205 } CONFIG_PAGE_FC_DEVICE_0, MPI_POINTER PTR_CONFIG_PAGE_FC_DEVICE_0, 2206 FCDevicePage0_t, MPI_POINTER pFCDevicePage0_t; 2207 2208 #define MPI_FC_DEVICE_PAGE0_PAGEVERSION (0x03) 2209 2210 #define MPI_FC_DEVICE_PAGE0_FLAGS_TARGETID_BUS_VALID (0x01) 2211 #define MPI_FC_DEVICE_PAGE0_FLAGS_PLOGI_INVALID (0x02) 2212 #define MPI_FC_DEVICE_PAGE0_FLAGS_PRLI_INVALID (0x04) 2213 2214 #define MPI_FC_DEVICE_PAGE0_PROT_IP (0x01) 2215 #define MPI_FC_DEVICE_PAGE0_PROT_FCP_TARGET (0x02) 2216 #define MPI_FC_DEVICE_PAGE0_PROT_FCP_INITIATOR (0x04) 2217 #define MPI_FC_DEVICE_PAGE0_PROT_FCP_RETRY (0x08) 2218 2219 #define MPI_FC_DEVICE_PAGE0_PGAD_PORT_MASK (MPI_FC_DEVICE_PGAD_PORT_MASK) 2220 #define MPI_FC_DEVICE_PAGE0_PGAD_FORM_MASK (MPI_FC_DEVICE_PGAD_FORM_MASK) 2221 #define MPI_FC_DEVICE_PAGE0_PGAD_FORM_NEXT_DID (MPI_FC_DEVICE_PGAD_FORM_NEXT_DID) 2222 #define MPI_FC_DEVICE_PAGE0_PGAD_FORM_BUS_TID (MPI_FC_DEVICE_PGAD_FORM_BUS_TID) 2223 #define MPI_FC_DEVICE_PAGE0_PGAD_DID_MASK (MPI_FC_DEVICE_PGAD_ND_DID_MASK) 2224 #define MPI_FC_DEVICE_PAGE0_PGAD_BUS_MASK (MPI_FC_DEVICE_PGAD_BT_BUS_MASK) 2225 #define MPI_FC_DEVICE_PAGE0_PGAD_BUS_SHIFT (MPI_FC_DEVICE_PGAD_BT_BUS_SHIFT) 2226 #define MPI_FC_DEVICE_PAGE0_PGAD_TID_MASK (MPI_FC_DEVICE_PGAD_BT_TID_MASK) 2227 2228 #define MPI_FC_DEVICE_PAGE0_HARD_ALPA_UNKNOWN (0xFF) 2229 2230 /**************************************************************************** 2231 * RAID Volume Config Pages 2232 ****************************************************************************/ 2233 2234 typedef struct _RAID_VOL0_PHYS_DISK 2235 { 2236 U16 Reserved; /* 00h */ 2237 U8 PhysDiskMap; /* 02h */ 2238 U8 PhysDiskNum; /* 03h */ 2239 } RAID_VOL0_PHYS_DISK, MPI_POINTER PTR_RAID_VOL0_PHYS_DISK, 2240 RaidVol0PhysDisk_t, MPI_POINTER pRaidVol0PhysDisk_t; 2241 2242 #define MPI_RAIDVOL0_PHYSDISK_PRIMARY (0x01) 2243 #define MPI_RAIDVOL0_PHYSDISK_SECONDARY (0x02) 2244 2245 typedef struct _RAID_VOL0_STATUS 2246 { 2247 U8 Flags; /* 00h */ 2248 U8 State; /* 01h */ 2249 U16 Reserved; /* 02h */ 2250 } RAID_VOL0_STATUS, MPI_POINTER PTR_RAID_VOL0_STATUS, 2251 RaidVol0Status_t, MPI_POINTER pRaidVol0Status_t; 2252 2253 /* RAID Volume Page 0 VolumeStatus defines */ 2254 #define MPI_RAIDVOL0_STATUS_FLAG_ENABLED (0x01) 2255 #define MPI_RAIDVOL0_STATUS_FLAG_QUIESCED (0x02) 2256 #define MPI_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS (0x04) 2257 #define MPI_RAIDVOL0_STATUS_FLAG_VOLUME_INACTIVE (0x08) 2258 #define MPI_RAIDVOL0_STATUS_FLAG_BAD_BLOCK_TABLE_FULL (0x10) 2259 2260 #define MPI_RAIDVOL0_STATUS_STATE_OPTIMAL (0x00) 2261 #define MPI_RAIDVOL0_STATUS_STATE_DEGRADED (0x01) 2262 #define MPI_RAIDVOL0_STATUS_STATE_FAILED (0x02) 2263 #define MPI_RAIDVOL0_STATUS_STATE_MISSING (0x03) 2264 2265 typedef struct _RAID_VOL0_SETTINGS 2266 { 2267 U16 Settings; /* 00h */ 2268 U8 HotSparePool; /* 01h */ /* MPI_RAID_HOT_SPARE_POOL_ */ 2269 U8 Reserved; /* 02h */ 2270 } RAID_VOL0_SETTINGS, MPI_POINTER PTR_RAID_VOL0_SETTINGS, 2271 RaidVol0Settings, MPI_POINTER pRaidVol0Settings; 2272 2273 /* RAID Volume Page 0 VolumeSettings defines */ 2274 #define MPI_RAIDVOL0_SETTING_WRITE_CACHING_ENABLE (0x0001) 2275 #define MPI_RAIDVOL0_SETTING_OFFLINE_ON_SMART (0x0002) 2276 #define MPI_RAIDVOL0_SETTING_AUTO_CONFIGURE (0x0004) 2277 #define MPI_RAIDVOL0_SETTING_PRIORITY_RESYNC (0x0008) 2278 #define MPI_RAIDVOL0_SETTING_FAST_DATA_SCRUBBING_0102 (0x0020) /* obsolete */ 2279 2280 #define MPI_RAIDVOL0_SETTING_MASK_METADATA_SIZE (0x00C0) 2281 #define MPI_RAIDVOL0_SETTING_64MB_METADATA_SIZE (0x0000) 2282 #define MPI_RAIDVOL0_SETTING_512MB_METADATA_SIZE (0x0040) 2283 2284 #define MPI_RAIDVOL0_SETTING_USE_PRODUCT_ID_SUFFIX (0x0010) 2285 #define MPI_RAIDVOL0_SETTING_USE_DEFAULTS (0x8000) 2286 2287 /* RAID Volume Page 0 HotSparePool defines, also used in RAID Physical Disk */ 2288 #define MPI_RAID_HOT_SPARE_POOL_0 (0x01) 2289 #define MPI_RAID_HOT_SPARE_POOL_1 (0x02) 2290 #define MPI_RAID_HOT_SPARE_POOL_2 (0x04) 2291 #define MPI_RAID_HOT_SPARE_POOL_3 (0x08) 2292 #define MPI_RAID_HOT_SPARE_POOL_4 (0x10) 2293 #define MPI_RAID_HOT_SPARE_POOL_5 (0x20) 2294 #define MPI_RAID_HOT_SPARE_POOL_6 (0x40) 2295 #define MPI_RAID_HOT_SPARE_POOL_7 (0x80) 2296 2297 /* 2298 * Host code (drivers, BIOS, utilities, etc.) should leave this define set to 2299 * one and check Header.PageLength at runtime. 2300 */ 2301 #ifndef MPI_RAID_VOL_PAGE_0_PHYSDISK_MAX 2302 #define MPI_RAID_VOL_PAGE_0_PHYSDISK_MAX (1) 2303 #endif 2304 2305 typedef struct _CONFIG_PAGE_RAID_VOL_0 2306 { 2307 CONFIG_PAGE_HEADER Header; /* 00h */ 2308 U8 VolumeID; /* 04h */ 2309 U8 VolumeBus; /* 05h */ 2310 U8 VolumeIOC; /* 06h */ 2311 U8 VolumeType; /* 07h */ /* MPI_RAID_VOL_TYPE_ */ 2312 RAID_VOL0_STATUS VolumeStatus; /* 08h */ 2313 RAID_VOL0_SETTINGS VolumeSettings; /* 0Ch */ 2314 U32 MaxLBA; /* 10h */ 2315 U32 MaxLBAHigh; /* 14h */ 2316 U32 StripeSize; /* 18h */ 2317 U32 Reserved2; /* 1Ch */ 2318 U32 Reserved3; /* 20h */ 2319 U8 NumPhysDisks; /* 24h */ 2320 U8 DataScrubRate; /* 25h */ 2321 U8 ResyncRate; /* 26h */ 2322 U8 InactiveStatus; /* 27h */ 2323 RAID_VOL0_PHYS_DISK PhysDisk[MPI_RAID_VOL_PAGE_0_PHYSDISK_MAX];/* 28h */ 2324 } CONFIG_PAGE_RAID_VOL_0, MPI_POINTER PTR_CONFIG_PAGE_RAID_VOL_0, 2325 RaidVolumePage0_t, MPI_POINTER pRaidVolumePage0_t; 2326 2327 #define MPI_RAIDVOLPAGE0_PAGEVERSION (0x07) 2328 2329 /* values for RAID Volume Page 0 InactiveStatus field */ 2330 #define MPI_RAIDVOLPAGE0_UNKNOWN_INACTIVE (0x00) 2331 #define MPI_RAIDVOLPAGE0_STALE_METADATA_INACTIVE (0x01) 2332 #define MPI_RAIDVOLPAGE0_FOREIGN_VOLUME_INACTIVE (0x02) 2333 #define MPI_RAIDVOLPAGE0_INSUFFICIENT_RESOURCE_INACTIVE (0x03) 2334 #define MPI_RAIDVOLPAGE0_CLONE_VOLUME_INACTIVE (0x04) 2335 #define MPI_RAIDVOLPAGE0_INSUFFICIENT_METADATA_INACTIVE (0x05) 2336 #define MPI_RAIDVOLPAGE0_PREVIOUSLY_DELETED (0x06) 2337 2338 2339 typedef struct _CONFIG_PAGE_RAID_VOL_1 2340 { 2341 CONFIG_PAGE_HEADER Header; /* 00h */ 2342 U8 VolumeID; /* 04h */ 2343 U8 VolumeBus; /* 05h */ 2344 U8 VolumeIOC; /* 06h */ 2345 U8 Reserved0; /* 07h */ 2346 U8 GUID[24]; /* 08h */ 2347 U8 Name[32]; /* 20h */ 2348 U64 WWID; /* 40h */ 2349 U32 Reserved1; /* 48h */ 2350 U32 Reserved2; /* 4Ch */ 2351 } CONFIG_PAGE_RAID_VOL_1, MPI_POINTER PTR_CONFIG_PAGE_RAID_VOL_1, 2352 RaidVolumePage1_t, MPI_POINTER pRaidVolumePage1_t; 2353 2354 #define MPI_RAIDVOLPAGE1_PAGEVERSION (0x01) 2355 2356 2357 /**************************************************************************** 2358 * RAID Physical Disk Config Pages 2359 ****************************************************************************/ 2360 2361 typedef struct _RAID_PHYS_DISK0_ERROR_DATA 2362 { 2363 U8 ErrorCdbByte; /* 00h */ 2364 U8 ErrorSenseKey; /* 01h */ 2365 U16 Reserved; /* 02h */ 2366 U16 ErrorCount; /* 04h */ 2367 U8 ErrorASC; /* 06h */ 2368 U8 ErrorASCQ; /* 07h */ 2369 U16 SmartCount; /* 08h */ 2370 U8 SmartASC; /* 0Ah */ 2371 U8 SmartASCQ; /* 0Bh */ 2372 } RAID_PHYS_DISK0_ERROR_DATA, MPI_POINTER PTR_RAID_PHYS_DISK0_ERROR_DATA, 2373 RaidPhysDisk0ErrorData_t, MPI_POINTER pRaidPhysDisk0ErrorData_t; 2374 2375 typedef struct _RAID_PHYS_DISK_INQUIRY_DATA 2376 { 2377 U8 VendorID[8]; /* 00h */ 2378 U8 ProductID[16]; /* 08h */ 2379 U8 ProductRevLevel[4]; /* 18h */ 2380 U8 Info[32]; /* 1Ch */ 2381 } RAID_PHYS_DISK0_INQUIRY_DATA, MPI_POINTER PTR_RAID_PHYS_DISK0_INQUIRY_DATA, 2382 RaidPhysDisk0InquiryData, MPI_POINTER pRaidPhysDisk0InquiryData; 2383 2384 typedef struct _RAID_PHYS_DISK0_SETTINGS 2385 { 2386 U8 SepID; /* 00h */ 2387 U8 SepBus; /* 01h */ 2388 U8 HotSparePool; /* 02h */ /* MPI_RAID_HOT_SPARE_POOL_ */ 2389 U8 PhysDiskSettings; /* 03h */ 2390 } RAID_PHYS_DISK0_SETTINGS, MPI_POINTER PTR_RAID_PHYS_DISK0_SETTINGS, 2391 RaidPhysDiskSettings_t, MPI_POINTER pRaidPhysDiskSettings_t; 2392 2393 typedef struct _RAID_PHYS_DISK0_STATUS 2394 { 2395 U8 Flags; /* 00h */ 2396 U8 State; /* 01h */ 2397 U16 Reserved; /* 02h */ 2398 } RAID_PHYS_DISK0_STATUS, MPI_POINTER PTR_RAID_PHYS_DISK0_STATUS, 2399 RaidPhysDiskStatus_t, MPI_POINTER pRaidPhysDiskStatus_t; 2400 2401 /* RAID Physical Disk PhysDiskStatus flags */ 2402 2403 #define MPI_PHYSDISK0_STATUS_FLAG_OUT_OF_SYNC (0x01) 2404 #define MPI_PHYSDISK0_STATUS_FLAG_QUIESCED (0x02) 2405 #define MPI_PHYSDISK0_STATUS_FLAG_INACTIVE_VOLUME (0x04) 2406 #define MPI_PHYSDISK0_STATUS_FLAG_OPTIMAL_PREVIOUS (0x00) 2407 #define MPI_PHYSDISK0_STATUS_FLAG_NOT_OPTIMAL_PREVIOUS (0x08) 2408 2409 #define MPI_PHYSDISK0_STATUS_ONLINE (0x00) 2410 #define MPI_PHYSDISK0_STATUS_MISSING (0x01) 2411 #define MPI_PHYSDISK0_STATUS_NOT_COMPATIBLE (0x02) 2412 #define MPI_PHYSDISK0_STATUS_FAILED (0x03) 2413 #define MPI_PHYSDISK0_STATUS_INITIALIZING (0x04) 2414 #define MPI_PHYSDISK0_STATUS_OFFLINE_REQUESTED (0x05) 2415 #define MPI_PHYSDISK0_STATUS_FAILED_REQUESTED (0x06) 2416 #define MPI_PHYSDISK0_STATUS_OTHER_OFFLINE (0xFF) 2417 2418 typedef struct _CONFIG_PAGE_RAID_PHYS_DISK_0 2419 { 2420 CONFIG_PAGE_HEADER Header; /* 00h */ 2421 U8 PhysDiskID; /* 04h */ 2422 U8 PhysDiskBus; /* 05h */ 2423 U8 PhysDiskIOC; /* 06h */ 2424 U8 PhysDiskNum; /* 07h */ 2425 RAID_PHYS_DISK0_SETTINGS PhysDiskSettings; /* 08h */ 2426 U32 Reserved1; /* 0Ch */ 2427 U8 ExtDiskIdentifier[8]; /* 10h */ 2428 U8 DiskIdentifier[16]; /* 18h */ 2429 RAID_PHYS_DISK0_INQUIRY_DATA InquiryData; /* 28h */ 2430 RAID_PHYS_DISK0_STATUS PhysDiskStatus; /* 64h */ 2431 U32 MaxLBA; /* 68h */ 2432 RAID_PHYS_DISK0_ERROR_DATA ErrorData; /* 6Ch */ 2433 } CONFIG_PAGE_RAID_PHYS_DISK_0, MPI_POINTER PTR_CONFIG_PAGE_RAID_PHYS_DISK_0, 2434 RaidPhysDiskPage0_t, MPI_POINTER pRaidPhysDiskPage0_t; 2435 2436 #define MPI_RAIDPHYSDISKPAGE0_PAGEVERSION (0x02) 2437 2438 2439 typedef struct _RAID_PHYS_DISK1_PATH 2440 { 2441 U8 PhysDiskID; /* 00h */ 2442 U8 PhysDiskBus; /* 01h */ 2443 U16 Reserved1; /* 02h */ 2444 U64 WWID; /* 04h */ 2445 U64 OwnerWWID; /* 0Ch */ 2446 U8 OwnerIdentifier; /* 14h */ 2447 U8 Reserved2; /* 15h */ 2448 U16 Flags; /* 16h */ 2449 } RAID_PHYS_DISK1_PATH, MPI_POINTER PTR_RAID_PHYS_DISK1_PATH, 2450 RaidPhysDisk1Path_t, MPI_POINTER pRaidPhysDisk1Path_t; 2451 2452 /* RAID Physical Disk Page 1 Flags field defines */ 2453 #define MPI_RAID_PHYSDISK1_FLAG_BROKEN (0x0002) 2454 #define MPI_RAID_PHYSDISK1_FLAG_INVALID (0x0001) 2455 2456 2457 /* 2458 * Host code (drivers, BIOS, utilities, etc.) should leave this define set to 2459 * one and check Header.PageLength or NumPhysDiskPaths at runtime. 2460 */ 2461 #ifndef MPI_RAID_PHYS_DISK1_PATH_MAX 2462 #define MPI_RAID_PHYS_DISK1_PATH_MAX (1) 2463 #endif 2464 2465 typedef struct _CONFIG_PAGE_RAID_PHYS_DISK_1 2466 { 2467 CONFIG_PAGE_HEADER Header; /* 00h */ 2468 U8 NumPhysDiskPaths; /* 04h */ 2469 U8 PhysDiskNum; /* 05h */ 2470 U16 Reserved2; /* 06h */ 2471 U32 Reserved1; /* 08h */ 2472 RAID_PHYS_DISK1_PATH Path[MPI_RAID_PHYS_DISK1_PATH_MAX];/* 0Ch */ 2473 } CONFIG_PAGE_RAID_PHYS_DISK_1, MPI_POINTER PTR_CONFIG_PAGE_RAID_PHYS_DISK_1, 2474 RaidPhysDiskPage1_t, MPI_POINTER pRaidPhysDiskPage1_t; 2475 2476 #define MPI_RAIDPHYSDISKPAGE1_PAGEVERSION (0x00) 2477 2478 2479 /**************************************************************************** 2480 * LAN Config Pages 2481 ****************************************************************************/ 2482 2483 typedef struct _CONFIG_PAGE_LAN_0 2484 { 2485 ConfigPageHeader_t Header; /* 00h */ 2486 U16 TxRxModes; /* 04h */ 2487 U16 Reserved; /* 06h */ 2488 U32 PacketPrePad; /* 08h */ 2489 } CONFIG_PAGE_LAN_0, MPI_POINTER PTR_CONFIG_PAGE_LAN_0, 2490 LANPage0_t, MPI_POINTER pLANPage0_t; 2491 2492 #define MPI_LAN_PAGE0_PAGEVERSION (0x01) 2493 2494 #define MPI_LAN_PAGE0_RETURN_LOOPBACK (0x0000) 2495 #define MPI_LAN_PAGE0_SUPPRESS_LOOPBACK (0x0001) 2496 #define MPI_LAN_PAGE0_LOOPBACK_MASK (0x0001) 2497 2498 typedef struct _CONFIG_PAGE_LAN_1 2499 { 2500 ConfigPageHeader_t Header; /* 00h */ 2501 U16 Reserved; /* 04h */ 2502 U8 CurrentDeviceState; /* 06h */ 2503 U8 Reserved1; /* 07h */ 2504 U32 MinPacketSize; /* 08h */ 2505 U32 MaxPacketSize; /* 0Ch */ 2506 U32 HardwareAddressLow; /* 10h */ 2507 U32 HardwareAddressHigh; /* 14h */ 2508 U32 MaxWireSpeedLow; /* 18h */ 2509 U32 MaxWireSpeedHigh; /* 1Ch */ 2510 U32 BucketsRemaining; /* 20h */ 2511 U32 MaxReplySize; /* 24h */ 2512 U32 NegWireSpeedLow; /* 28h */ 2513 U32 NegWireSpeedHigh; /* 2Ch */ 2514 } CONFIG_PAGE_LAN_1, MPI_POINTER PTR_CONFIG_PAGE_LAN_1, 2515 LANPage1_t, MPI_POINTER pLANPage1_t; 2516 2517 #define MPI_LAN_PAGE1_PAGEVERSION (0x03) 2518 2519 #define MPI_LAN_PAGE1_DEV_STATE_RESET (0x00) 2520 #define MPI_LAN_PAGE1_DEV_STATE_OPERATIONAL (0x01) 2521 2522 2523 /**************************************************************************** 2524 * Inband Config Pages 2525 ****************************************************************************/ 2526 2527 typedef struct _CONFIG_PAGE_INBAND_0 2528 { 2529 CONFIG_PAGE_HEADER Header; /* 00h */ 2530 MPI_VERSION_FORMAT InbandVersion; /* 04h */ 2531 U16 MaximumBuffers; /* 08h */ 2532 U16 Reserved1; /* 0Ah */ 2533 } CONFIG_PAGE_INBAND_0, MPI_POINTER PTR_CONFIG_PAGE_INBAND_0, 2534 InbandPage0_t, MPI_POINTER pInbandPage0_t; 2535 2536 #define MPI_INBAND_PAGEVERSION (0x00) 2537 2538 2539 2540 /**************************************************************************** 2541 * SAS IO Unit Config Pages 2542 ****************************************************************************/ 2543 2544 typedef struct _MPI_SAS_IO_UNIT0_PHY_DATA 2545 { 2546 U8 Port; /* 00h */ 2547 U8 PortFlags; /* 01h */ 2548 U8 PhyFlags; /* 02h */ 2549 U8 NegotiatedLinkRate; /* 03h */ 2550 U32 ControllerPhyDeviceInfo;/* 04h */ 2551 U16 AttachedDeviceHandle; /* 08h */ 2552 U16 ControllerDevHandle; /* 0Ah */ 2553 U32 DiscoveryStatus; /* 0Ch */ 2554 } MPI_SAS_IO_UNIT0_PHY_DATA, MPI_POINTER PTR_MPI_SAS_IO_UNIT0_PHY_DATA, 2555 SasIOUnit0PhyData, MPI_POINTER pSasIOUnit0PhyData; 2556 2557 /* 2558 * Host code (drivers, BIOS, utilities, etc.) should leave this define set to 2559 * one and check Header.PageLength at runtime. 2560 */ 2561 #ifndef MPI_SAS_IOUNIT0_PHY_MAX 2562 #define MPI_SAS_IOUNIT0_PHY_MAX (1) 2563 #endif 2564 2565 typedef struct _CONFIG_PAGE_SAS_IO_UNIT_0 2566 { 2567 CONFIG_EXTENDED_PAGE_HEADER Header; /* 00h */ 2568 U16 NvdataVersionDefault; /* 08h */ 2569 U16 NvdataVersionPersistent; /* 0Ah */ 2570 U8 NumPhys; /* 0Ch */ 2571 U8 Reserved2; /* 0Dh */ 2572 U16 Reserved3; /* 0Eh */ 2573 MPI_SAS_IO_UNIT0_PHY_DATA PhyData[MPI_SAS_IOUNIT0_PHY_MAX]; /* 10h */ 2574 } CONFIG_PAGE_SAS_IO_UNIT_0, MPI_POINTER PTR_CONFIG_PAGE_SAS_IO_UNIT_0, 2575 SasIOUnitPage0_t, MPI_POINTER pSasIOUnitPage0_t; 2576 2577 #define MPI_SASIOUNITPAGE0_PAGEVERSION (0x04) 2578 2579 /* values for SAS IO Unit Page 0 PortFlags */ 2580 #define MPI_SAS_IOUNIT0_PORT_FLAGS_DISCOVERY_IN_PROGRESS (0x08) 2581 #define MPI_SAS_IOUNIT0_PORT_FLAGS_0_TARGET_IOC_NUM (0x00) 2582 #define MPI_SAS_IOUNIT0_PORT_FLAGS_1_TARGET_IOC_NUM (0x04) 2583 #define MPI_SAS_IOUNIT0_PORT_FLAGS_AUTO_PORT_CONFIG (0x01) 2584 2585 /* values for SAS IO Unit Page 0 PhyFlags */ 2586 #define MPI_SAS_IOUNIT0_PHY_FLAGS_PHY_DISABLED (0x04) 2587 #define MPI_SAS_IOUNIT0_PHY_FLAGS_TX_INVERT (0x02) 2588 #define MPI_SAS_IOUNIT0_PHY_FLAGS_RX_INVERT (0x01) 2589 2590 /* values for SAS IO Unit Page 0 NegotiatedLinkRate */ 2591 #define MPI_SAS_IOUNIT0_RATE_UNKNOWN (0x00) 2592 #define MPI_SAS_IOUNIT0_RATE_PHY_DISABLED (0x01) 2593 #define MPI_SAS_IOUNIT0_RATE_FAILED_SPEED_NEGOTIATION (0x02) 2594 #define MPI_SAS_IOUNIT0_RATE_SATA_OOB_COMPLETE (0x03) 2595 #define MPI_SAS_IOUNIT0_RATE_1_5 (0x08) 2596 #define MPI_SAS_IOUNIT0_RATE_3_0 (0x09) 2597 #define MPI_SAS_IOUNIT0_RATE_6_0 (0x0A) 2598 2599 /* see mpi_sas.h for values for SAS IO Unit Page 0 ControllerPhyDeviceInfo values */ 2600 2601 /* values for SAS IO Unit Page 0 DiscoveryStatus */ 2602 #define MPI_SAS_IOUNIT0_DS_LOOP_DETECTED (0x00000001) 2603 #define MPI_SAS_IOUNIT0_DS_UNADDRESSABLE_DEVICE (0x00000002) 2604 #define MPI_SAS_IOUNIT0_DS_MULTIPLE_PORTS (0x00000004) 2605 #define MPI_SAS_IOUNIT0_DS_EXPANDER_ERR (0x00000008) 2606 #define MPI_SAS_IOUNIT0_DS_SMP_TIMEOUT (0x00000010) 2607 #define MPI_SAS_IOUNIT0_DS_OUT_ROUTE_ENTRIES (0x00000020) 2608 #define MPI_SAS_IOUNIT0_DS_INDEX_NOT_EXIST (0x00000040) 2609 #define MPI_SAS_IOUNIT0_DS_SMP_FUNCTION_FAILED (0x00000080) 2610 #define MPI_SAS_IOUNIT0_DS_SMP_CRC_ERROR (0x00000100) 2611 #define MPI_SAS_IOUNIT0_DS_SUBTRACTIVE_LINK (0x00000200) 2612 #define MPI_SAS_IOUNIT0_DS_TABLE_LINK (0x00000400) 2613 #define MPI_SAS_IOUNIT0_DS_UNSUPPORTED_DEVICE (0x00000800) 2614 #define MPI_SAS_IOUNIT0_DS_MAX_SATA_TARGETS (0x00001000) 2615 #define MPI_SAS_IOUNIT0_DS_MULTI_PORT_DOMAIN (0x00002000) 2616 2617 2618 typedef struct _MPI_SAS_IO_UNIT1_PHY_DATA 2619 { 2620 U8 Port; /* 00h */ 2621 U8 PortFlags; /* 01h */ 2622 U8 PhyFlags; /* 02h */ 2623 U8 MaxMinLinkRate; /* 03h */ 2624 U32 ControllerPhyDeviceInfo; /* 04h */ 2625 U16 MaxTargetPortConnectTime; /* 08h */ 2626 U16 Reserved1; /* 0Ah */ 2627 } MPI_SAS_IO_UNIT1_PHY_DATA, MPI_POINTER PTR_MPI_SAS_IO_UNIT1_PHY_DATA, 2628 SasIOUnit1PhyData, MPI_POINTER pSasIOUnit1PhyData; 2629 2630 /* 2631 * Host code (drivers, BIOS, utilities, etc.) should leave this define set to 2632 * one and check Header.PageLength at runtime. 2633 */ 2634 #ifndef MPI_SAS_IOUNIT1_PHY_MAX 2635 #define MPI_SAS_IOUNIT1_PHY_MAX (1) 2636 #endif 2637 2638 typedef struct _CONFIG_PAGE_SAS_IO_UNIT_1 2639 { 2640 CONFIG_EXTENDED_PAGE_HEADER Header; /* 00h */ 2641 U16 ControlFlags; /* 08h */ 2642 U16 MaxNumSATATargets; /* 0Ah */ 2643 U16 AdditionalControlFlags; /* 0Ch */ 2644 U16 Reserved1; /* 0Eh */ 2645 U8 NumPhys; /* 10h */ 2646 U8 SATAMaxQDepth; /* 11h */ 2647 U8 ReportDeviceMissingDelay; /* 12h */ 2648 U8 IODeviceMissingDelay; /* 13h */ 2649 MPI_SAS_IO_UNIT1_PHY_DATA PhyData[MPI_SAS_IOUNIT1_PHY_MAX]; /* 14h */ 2650 } CONFIG_PAGE_SAS_IO_UNIT_1, MPI_POINTER PTR_CONFIG_PAGE_SAS_IO_UNIT_1, 2651 SasIOUnitPage1_t, MPI_POINTER pSasIOUnitPage1_t; 2652 2653 #define MPI_SASIOUNITPAGE1_PAGEVERSION (0x07) 2654 2655 /* values for SAS IO Unit Page 1 ControlFlags */ 2656 #define MPI_SAS_IOUNIT1_CONTROL_DEVICE_SELF_TEST (0x8000) 2657 #define MPI_SAS_IOUNIT1_CONTROL_SATA_3_0_MAX (0x4000) 2658 #define MPI_SAS_IOUNIT1_CONTROL_SATA_1_5_MAX (0x2000) 2659 #define MPI_SAS_IOUNIT1_CONTROL_SATA_SW_PRESERVE (0x1000) 2660 #define MPI_SAS_IOUNIT1_CONTROL_DISABLE_SAS_HASH (0x0800) 2661 2662 #define MPI_SAS_IOUNIT1_CONTROL_MASK_DEV_SUPPORT (0x0600) 2663 #define MPI_SAS_IOUNIT1_CONTROL_SHIFT_DEV_SUPPORT (9) 2664 #define MPI_SAS_IOUNIT1_CONTROL_DEV_SUPPORT_BOTH (0x00) 2665 #define MPI_SAS_IOUNIT1_CONTROL_DEV_SAS_SUPPORT (0x01) 2666 #define MPI_SAS_IOUNIT1_CONTROL_DEV_SATA_SUPPORT (0x02) 2667 2668 #define MPI_SAS_IOUNIT1_CONTROL_POSTPONE_SATA_INIT (0x0100) 2669 #define MPI_SAS_IOUNIT1_CONTROL_SATA_48BIT_LBA_REQUIRED (0x0080) 2670 #define MPI_SAS_IOUNIT1_CONTROL_SATA_SMART_REQUIRED (0x0040) 2671 #define MPI_SAS_IOUNIT1_CONTROL_SATA_NCQ_REQUIRED (0x0020) 2672 #define MPI_SAS_IOUNIT1_CONTROL_SATA_FUA_REQUIRED (0x0010) 2673 #define MPI_SAS_IOUNIT1_CONTROL_PHY_ENABLE_ORDER_HIGH (0x0008) 2674 #define MPI_SAS_IOUNIT1_CONTROL_SUBTRACTIVE_ILLEGAL (0x0004) 2675 #define MPI_SAS_IOUNIT1_CONTROL_FIRST_LVL_DISC_ONLY (0x0002) 2676 #define MPI_SAS_IOUNIT1_CONTROL_CLEAR_AFFILIATION (0x0001) 2677 2678 /* values for SAS IO Unit Page 1 AdditionalControlFlags */ 2679 #define MPI_SAS_IOUNIT1_ACONTROL_MULTI_PORT_DOMAIN_ILLEGAL (0x0080) 2680 #define MPI_SAS_IOUNIT1_ACONTROL_SATA_ASYNCHROUNOUS_NOTIFICATION (0x0040) 2681 #define MPI_SAS_IOUNIT1_ACONTROL_HIDE_NONZERO_ATTACHED_PHY_IDENT (0x0020) 2682 #define MPI_SAS_IOUNIT1_ACONTROL_PORT_ENABLE_ONLY_SATA_LINK_RESET (0x0010) 2683 #define MPI_SAS_IOUNIT1_ACONTROL_OTHER_AFFILIATION_SATA_LINK_RESET (0x0008) 2684 #define MPI_SAS_IOUNIT1_ACONTROL_SELF_AFFILIATION_SATA_LINK_RESET (0x0004) 2685 #define MPI_SAS_IOUNIT1_ACONTROL_NO_AFFILIATION_SATA_LINK_RESET (0x0002) 2686 #define MPI_SAS_IOUNIT1_ACONTROL_ALLOW_TABLE_TO_TABLE (0x0001) 2687 2688 /* defines for SAS IO Unit Page 1 ReportDeviceMissingDelay */ 2689 #define MPI_SAS_IOUNIT1_REPORT_MISSING_TIMEOUT_MASK (0x7F) 2690 #define MPI_SAS_IOUNIT1_REPORT_MISSING_UNIT_16 (0x80) 2691 2692 /* values for SAS IO Unit Page 1 PortFlags */ 2693 #define MPI_SAS_IOUNIT1_PORT_FLAGS_0_TARGET_IOC_NUM (0x00) 2694 #define MPI_SAS_IOUNIT1_PORT_FLAGS_1_TARGET_IOC_NUM (0x04) 2695 #define MPI_SAS_IOUNIT1_PORT_FLAGS_AUTO_PORT_CONFIG (0x01) 2696 2697 /* values for SAS IO Unit Page 0 PhyFlags */ 2698 #define MPI_SAS_IOUNIT1_PHY_FLAGS_PHY_DISABLE (0x04) 2699 #define MPI_SAS_IOUNIT1_PHY_FLAGS_TX_INVERT (0x02) 2700 #define MPI_SAS_IOUNIT1_PHY_FLAGS_RX_INVERT (0x01) 2701 2702 /* values for SAS IO Unit Page 0 MaxMinLinkRate */ 2703 #define MPI_SAS_IOUNIT1_MAX_RATE_MASK (0xF0) 2704 #define MPI_SAS_IOUNIT1_MAX_RATE_1_5 (0x80) 2705 #define MPI_SAS_IOUNIT1_MAX_RATE_3_0 (0x90) 2706 #define MPI_SAS_IOUNIT1_MIN_RATE_MASK (0x0F) 2707 #define MPI_SAS_IOUNIT1_MIN_RATE_1_5 (0x08) 2708 #define MPI_SAS_IOUNIT1_MIN_RATE_3_0 (0x09) 2709 2710 /* see mpi_sas.h for values for SAS IO Unit Page 1 ControllerPhyDeviceInfo values */ 2711 2712 2713 typedef struct _CONFIG_PAGE_SAS_IO_UNIT_2 2714 { 2715 CONFIG_EXTENDED_PAGE_HEADER Header; /* 00h */ 2716 U8 NumDevsPerEnclosure; /* 08h */ 2717 U8 Reserved1; /* 09h */ 2718 U16 Reserved2; /* 0Ah */ 2719 U16 MaxPersistentIDs; /* 0Ch */ 2720 U16 NumPersistentIDsUsed; /* 0Eh */ 2721 U8 Status; /* 10h */ 2722 U8 Flags; /* 11h */ 2723 U16 MaxNumPhysicalMappedIDs;/* 12h */ 2724 } CONFIG_PAGE_SAS_IO_UNIT_2, MPI_POINTER PTR_CONFIG_PAGE_SAS_IO_UNIT_2, 2725 SasIOUnitPage2_t, MPI_POINTER pSasIOUnitPage2_t; 2726 2727 #define MPI_SASIOUNITPAGE2_PAGEVERSION (0x06) 2728 2729 /* values for SAS IO Unit Page 2 Status field */ 2730 #define MPI_SAS_IOUNIT2_STATUS_DEVICE_LIMIT_EXCEEDED (0x08) 2731 #define MPI_SAS_IOUNIT2_STATUS_ENCLOSURE_DEVICES_UNMAPPED (0x04) 2732 #define MPI_SAS_IOUNIT2_STATUS_DISABLED_PERSISTENT_MAPPINGS (0x02) 2733 #define MPI_SAS_IOUNIT2_STATUS_FULL_PERSISTENT_MAPPINGS (0x01) 2734 2735 /* values for SAS IO Unit Page 2 Flags field */ 2736 #define MPI_SAS_IOUNIT2_FLAGS_DISABLE_PERSISTENT_MAPPINGS (0x01) 2737 /* Physical Mapping Modes */ 2738 #define MPI_SAS_IOUNIT2_FLAGS_MASK_PHYS_MAP_MODE (0x0E) 2739 #define MPI_SAS_IOUNIT2_FLAGS_SHIFT_PHYS_MAP_MODE (1) 2740 #define MPI_SAS_IOUNIT2_FLAGS_NO_PHYS_MAP (0x00) 2741 #define MPI_SAS_IOUNIT2_FLAGS_DIRECT_ATTACH_PHYS_MAP (0x01) 2742 #define MPI_SAS_IOUNIT2_FLAGS_ENCLOSURE_SLOT_PHYS_MAP (0x02) 2743 #define MPI_SAS_IOUNIT2_FLAGS_HOST_ASSIGNED_PHYS_MAP (0x07) 2744 2745 #define MPI_SAS_IOUNIT2_FLAGS_RESERVE_ID_0_FOR_BOOT (0x10) 2746 #define MPI_SAS_IOUNIT2_FLAGS_DA_STARTING_SLOT (0x20) 2747 2748 2749 typedef struct _CONFIG_PAGE_SAS_IO_UNIT_3 2750 { 2751 CONFIG_EXTENDED_PAGE_HEADER Header; /* 00h */ 2752 U32 Reserved1; /* 08h */ 2753 U32 MaxInvalidDwordCount; /* 0Ch */ 2754 U32 InvalidDwordCountTime; /* 10h */ 2755 U32 MaxRunningDisparityErrorCount; /* 14h */ 2756 U32 RunningDisparityErrorTime; /* 18h */ 2757 U32 MaxLossDwordSynchCount; /* 1Ch */ 2758 U32 LossDwordSynchCountTime; /* 20h */ 2759 U32 MaxPhyResetProblemCount; /* 24h */ 2760 U32 PhyResetProblemTime; /* 28h */ 2761 } CONFIG_PAGE_SAS_IO_UNIT_3, MPI_POINTER PTR_CONFIG_PAGE_SAS_IO_UNIT_3, 2762 SasIOUnitPage3_t, MPI_POINTER pSasIOUnitPage3_t; 2763 2764 #define MPI_SASIOUNITPAGE3_PAGEVERSION (0x00) 2765 2766 2767 /**************************************************************************** 2768 * SAS Expander Config Pages 2769 ****************************************************************************/ 2770 2771 typedef struct _CONFIG_PAGE_SAS_EXPANDER_0 2772 { 2773 CONFIG_EXTENDED_PAGE_HEADER Header; /* 00h */ 2774 U8 PhysicalPort; /* 08h */ 2775 U8 Reserved1; /* 09h */ 2776 U16 EnclosureHandle; /* 0Ah */ 2777 U64 SASAddress; /* 0Ch */ 2778 U32 DiscoveryStatus; /* 14h */ 2779 U16 DevHandle; /* 18h */ 2780 U16 ParentDevHandle; /* 1Ah */ 2781 U16 ExpanderChangeCount; /* 1Ch */ 2782 U16 ExpanderRouteIndexes; /* 1Eh */ 2783 U8 NumPhys; /* 20h */ 2784 U8 SASLevel; /* 21h */ 2785 U8 Flags; /* 22h */ 2786 U8 Reserved3; /* 23h */ 2787 } CONFIG_PAGE_SAS_EXPANDER_0, MPI_POINTER PTR_CONFIG_PAGE_SAS_EXPANDER_0, 2788 SasExpanderPage0_t, MPI_POINTER pSasExpanderPage0_t; 2789 2790 #define MPI_SASEXPANDER0_PAGEVERSION (0x03) 2791 2792 /* values for SAS Expander Page 0 DiscoveryStatus field */ 2793 #define MPI_SAS_EXPANDER0_DS_LOOP_DETECTED (0x00000001) 2794 #define MPI_SAS_EXPANDER0_DS_UNADDRESSABLE_DEVICE (0x00000002) 2795 #define MPI_SAS_EXPANDER0_DS_MULTIPLE_PORTS (0x00000004) 2796 #define MPI_SAS_EXPANDER0_DS_EXPANDER_ERR (0x00000008) 2797 #define MPI_SAS_EXPANDER0_DS_SMP_TIMEOUT (0x00000010) 2798 #define MPI_SAS_EXPANDER0_DS_OUT_ROUTE_ENTRIES (0x00000020) 2799 #define MPI_SAS_EXPANDER0_DS_INDEX_NOT_EXIST (0x00000040) 2800 #define MPI_SAS_EXPANDER0_DS_SMP_FUNCTION_FAILED (0x00000080) 2801 #define MPI_SAS_EXPANDER0_DS_SMP_CRC_ERROR (0x00000100) 2802 #define MPI_SAS_EXPANDER0_DS_SUBTRACTIVE_LINK (0x00000200) 2803 #define MPI_SAS_EXPANDER0_DS_TABLE_LINK (0x00000400) 2804 #define MPI_SAS_EXPANDER0_DS_UNSUPPORTED_DEVICE (0x00000800) 2805 2806 /* values for SAS Expander Page 0 Flags field */ 2807 #define MPI_SAS_EXPANDER0_FLAGS_CONNECTOR_END_DEVICE (0x04) 2808 #define MPI_SAS_EXPANDER0_FLAGS_ROUTE_TABLE_CONFIG (0x02) 2809 #define MPI_SAS_EXPANDER0_FLAGS_CONFIG_IN_PROGRESS (0x01) 2810 2811 2812 typedef struct _CONFIG_PAGE_SAS_EXPANDER_1 2813 { 2814 CONFIG_EXTENDED_PAGE_HEADER Header; /* 00h */ 2815 U8 PhysicalPort; /* 08h */ 2816 U8 Reserved1; /* 09h */ 2817 U16 Reserved2; /* 0Ah */ 2818 U8 NumPhys; /* 0Ch */ 2819 U8 Phy; /* 0Dh */ 2820 U16 NumTableEntriesProgrammed; /* 0Eh */ 2821 U8 ProgrammedLinkRate; /* 10h */ 2822 U8 HwLinkRate; /* 11h */ 2823 U16 AttachedDevHandle; /* 12h */ 2824 U32 PhyInfo; /* 14h */ 2825 U32 AttachedDeviceInfo; /* 18h */ 2826 U16 OwnerDevHandle; /* 1Ch */ 2827 U8 ChangeCount; /* 1Eh */ 2828 U8 NegotiatedLinkRate; /* 1Fh */ 2829 U8 PhyIdentifier; /* 20h */ 2830 U8 AttachedPhyIdentifier; /* 21h */ 2831 U8 Reserved3; /* 22h */ 2832 U8 DiscoveryInfo; /* 23h */ 2833 U32 Reserved4; /* 24h */ 2834 } CONFIG_PAGE_SAS_EXPANDER_1, MPI_POINTER PTR_CONFIG_PAGE_SAS_EXPANDER_1, 2835 SasExpanderPage1_t, MPI_POINTER pSasExpanderPage1_t; 2836 2837 #define MPI_SASEXPANDER1_PAGEVERSION (0x01) 2838 2839 /* use MPI_SAS_PHY0_PRATE_ defines for ProgrammedLinkRate */ 2840 2841 /* use MPI_SAS_PHY0_HWRATE_ defines for HwLinkRate */ 2842 2843 /* use MPI_SAS_PHY0_PHYINFO_ defines for PhyInfo */ 2844 2845 /* see mpi_sas.h for values for SAS Expander Page 1 AttachedDeviceInfo values */ 2846 2847 /* values for SAS Expander Page 1 DiscoveryInfo field */ 2848 #define MPI_SAS_EXPANDER1_DISCINFO_BAD_PHY_DISABLED (0x04) 2849 #define MPI_SAS_EXPANDER1_DISCINFO_LINK_STATUS_CHANGE (0x02) 2850 #define MPI_SAS_EXPANDER1_DISCINFO_NO_ROUTING_ENTRIES (0x01) 2851 2852 /* values for SAS Expander Page 1 NegotiatedLinkRate field */ 2853 #define MPI_SAS_EXPANDER1_NEG_RATE_UNKNOWN (0x00) 2854 #define MPI_SAS_EXPANDER1_NEG_RATE_PHY_DISABLED (0x01) 2855 #define MPI_SAS_EXPANDER1_NEG_RATE_FAILED_NEGOTIATION (0x02) 2856 #define MPI_SAS_EXPANDER1_NEG_RATE_SATA_OOB_COMPLETE (0x03) 2857 #define MPI_SAS_EXPANDER1_NEG_RATE_1_5 (0x08) 2858 #define MPI_SAS_EXPANDER1_NEG_RATE_3_0 (0x09) 2859 2860 2861 /**************************************************************************** 2862 * SAS Device Config Pages 2863 ****************************************************************************/ 2864 2865 typedef struct _CONFIG_PAGE_SAS_DEVICE_0 2866 { 2867 CONFIG_EXTENDED_PAGE_HEADER Header; /* 00h */ 2868 U16 Slot; /* 08h */ 2869 U16 EnclosureHandle; /* 0Ah */ 2870 U64 SASAddress; /* 0Ch */ 2871 U16 ParentDevHandle; /* 14h */ 2872 U8 PhyNum; /* 16h */ 2873 U8 AccessStatus; /* 17h */ 2874 U16 DevHandle; /* 18h */ 2875 U8 TargetID; /* 1Ah */ 2876 U8 Bus; /* 1Bh */ 2877 U32 DeviceInfo; /* 1Ch */ 2878 U16 Flags; /* 20h */ 2879 U8 PhysicalPort; /* 22h */ 2880 U8 Reserved2; /* 23h */ 2881 } CONFIG_PAGE_SAS_DEVICE_0, MPI_POINTER PTR_CONFIG_PAGE_SAS_DEVICE_0, 2882 SasDevicePage0_t, MPI_POINTER pSasDevicePage0_t; 2883 2884 #define MPI_SASDEVICE0_PAGEVERSION (0x05) 2885 2886 /* values for SAS Device Page 0 AccessStatus field */ 2887 #define MPI_SAS_DEVICE0_ASTATUS_NO_ERRORS (0x00) 2888 #define MPI_SAS_DEVICE0_ASTATUS_SATA_INIT_FAILED (0x01) 2889 #define MPI_SAS_DEVICE0_ASTATUS_SATA_CAPABILITY_FAILED (0x02) 2890 #define MPI_SAS_DEVICE0_ASTATUS_SATA_AFFILIATION_CONFLICT (0x03) 2891 #define MPI_SAS_DEVICE0_ASTATUS_SATA_NEEDS_INITIALIZATION (0x04) 2892 /* specific values for SATA Init failures */ 2893 #define MPI_SAS_DEVICE0_ASTATUS_SIF_UNKNOWN (0x10) 2894 #define MPI_SAS_DEVICE0_ASTATUS_SIF_AFFILIATION_CONFLICT (0x11) 2895 #define MPI_SAS_DEVICE0_ASTATUS_SIF_DIAG (0x12) 2896 #define MPI_SAS_DEVICE0_ASTATUS_SIF_IDENTIFICATION (0x13) 2897 #define MPI_SAS_DEVICE0_ASTATUS_SIF_CHECK_POWER (0x14) 2898 #define MPI_SAS_DEVICE0_ASTATUS_SIF_PIO_SN (0x15) 2899 #define MPI_SAS_DEVICE0_ASTATUS_SIF_MDMA_SN (0x16) 2900 #define MPI_SAS_DEVICE0_ASTATUS_SIF_UDMA_SN (0x17) 2901 #define MPI_SAS_DEVICE0_ASTATUS_SIF_ZONING_VIOLATION (0x18) 2902 #define MPI_SAS_DEVICE0_ASTATUS_SIF_NOT_ADDRESSABLE (0x19) 2903 #define MPI_SAS_DEVICE0_ASTATUS_SIF_MAX (0x1F) 2904 2905 /* values for SAS Device Page 0 Flags field */ 2906 #define MPI_SAS_DEVICE0_FLAGS_SATA_ASYNCHRONOUS_NOTIFY (0x0400) 2907 #define MPI_SAS_DEVICE0_FLAGS_SATA_SW_PRESERVE (0x0200) 2908 #define MPI_SAS_DEVICE0_FLAGS_UNSUPPORTED_DEVICE (0x0100) 2909 #define MPI_SAS_DEVICE0_FLAGS_SATA_48BIT_LBA_SUPPORTED (0x0080) 2910 #define MPI_SAS_DEVICE0_FLAGS_SATA_SMART_SUPPORTED (0x0040) 2911 #define MPI_SAS_DEVICE0_FLAGS_SATA_NCQ_SUPPORTED (0x0020) 2912 #define MPI_SAS_DEVICE0_FLAGS_SATA_FUA_SUPPORTED (0x0010) 2913 #define MPI_SAS_DEVICE0_FLAGS_PORT_SELECTOR_ATTACH (0x0008) 2914 #define MPI_SAS_DEVICE0_FLAGS_MAPPING_PERSISTENT (0x0004) 2915 #define MPI_SAS_DEVICE0_FLAGS_DEVICE_MAPPED (0x0002) 2916 #define MPI_SAS_DEVICE0_FLAGS_DEVICE_PRESENT (0x0001) 2917 2918 /* see mpi_sas.h for values for SAS Device Page 0 DeviceInfo values */ 2919 2920 2921 typedef struct _CONFIG_PAGE_SAS_DEVICE_1 2922 { 2923 CONFIG_EXTENDED_PAGE_HEADER Header; /* 00h */ 2924 U32 Reserved1; /* 08h */ 2925 U64 SASAddress; /* 0Ch */ 2926 U32 Reserved2; /* 14h */ 2927 U16 DevHandle; /* 18h */ 2928 U8 TargetID; /* 1Ah */ 2929 U8 Bus; /* 1Bh */ 2930 U8 InitialRegDeviceFIS[20];/* 1Ch */ 2931 } CONFIG_PAGE_SAS_DEVICE_1, MPI_POINTER PTR_CONFIG_PAGE_SAS_DEVICE_1, 2932 SasDevicePage1_t, MPI_POINTER pSasDevicePage1_t; 2933 2934 #define MPI_SASDEVICE1_PAGEVERSION (0x00) 2935 2936 2937 typedef struct _CONFIG_PAGE_SAS_DEVICE_2 2938 { 2939 CONFIG_EXTENDED_PAGE_HEADER Header; /* 00h */ 2940 U64 PhysicalIdentifier; /* 08h */ 2941 U32 EnclosureMapping; /* 10h */ 2942 } CONFIG_PAGE_SAS_DEVICE_2, MPI_POINTER PTR_CONFIG_PAGE_SAS_DEVICE_2, 2943 SasDevicePage2_t, MPI_POINTER pSasDevicePage2_t; 2944 2945 #define MPI_SASDEVICE2_PAGEVERSION (0x01) 2946 2947 /* defines for SAS Device Page 2 EnclosureMapping field */ 2948 #define MPI_SASDEVICE2_ENC_MAP_MASK_MISSING_COUNT (0x0000000F) 2949 #define MPI_SASDEVICE2_ENC_MAP_SHIFT_MISSING_COUNT (0) 2950 #define MPI_SASDEVICE2_ENC_MAP_MASK_NUM_SLOTS (0x000007F0) 2951 #define MPI_SASDEVICE2_ENC_MAP_SHIFT_NUM_SLOTS (4) 2952 #define MPI_SASDEVICE2_ENC_MAP_MASK_START_INDEX (0x001FF800) 2953 #define MPI_SASDEVICE2_ENC_MAP_SHIFT_START_INDEX (11) 2954 2955 2956 /**************************************************************************** 2957 * SAS PHY Config Pages 2958 ****************************************************************************/ 2959 2960 typedef struct _CONFIG_PAGE_SAS_PHY_0 2961 { 2962 CONFIG_EXTENDED_PAGE_HEADER Header; /* 00h */ 2963 U16 OwnerDevHandle; /* 08h */ 2964 U16 Reserved1; /* 0Ah */ 2965 U64 SASAddress; /* 0Ch */ 2966 U16 AttachedDevHandle; /* 14h */ 2967 U8 AttachedPhyIdentifier; /* 16h */ 2968 U8 Reserved2; /* 17h */ 2969 U32 AttachedDeviceInfo; /* 18h */ 2970 U8 ProgrammedLinkRate; /* 1Ch */ 2971 U8 HwLinkRate; /* 1Dh */ 2972 U8 ChangeCount; /* 1Eh */ 2973 U8 Flags; /* 1Fh */ 2974 U32 PhyInfo; /* 20h */ 2975 } CONFIG_PAGE_SAS_PHY_0, MPI_POINTER PTR_CONFIG_PAGE_SAS_PHY_0, 2976 SasPhyPage0_t, MPI_POINTER pSasPhyPage0_t; 2977 2978 #define MPI_SASPHY0_PAGEVERSION (0x01) 2979 2980 /* values for SAS PHY Page 0 ProgrammedLinkRate field */ 2981 #define MPI_SAS_PHY0_PRATE_MAX_RATE_MASK (0xF0) 2982 #define MPI_SAS_PHY0_PRATE_MAX_RATE_NOT_PROGRAMMABLE (0x00) 2983 #define MPI_SAS_PHY0_PRATE_MAX_RATE_1_5 (0x80) 2984 #define MPI_SAS_PHY0_PRATE_MAX_RATE_3_0 (0x90) 2985 #define MPI_SAS_PHY0_PRATE_MIN_RATE_MASK (0x0F) 2986 #define MPI_SAS_PHY0_PRATE_MIN_RATE_NOT_PROGRAMMABLE (0x00) 2987 #define MPI_SAS_PHY0_PRATE_MIN_RATE_1_5 (0x08) 2988 #define MPI_SAS_PHY0_PRATE_MIN_RATE_3_0 (0x09) 2989 2990 /* values for SAS PHY Page 0 HwLinkRate field */ 2991 #define MPI_SAS_PHY0_HWRATE_MAX_RATE_MASK (0xF0) 2992 #define MPI_SAS_PHY0_HWRATE_MAX_RATE_1_5 (0x80) 2993 #define MPI_SAS_PHY0_HWRATE_MAX_RATE_3_0 (0x90) 2994 #define MPI_SAS_PHY0_HWRATE_MIN_RATE_MASK (0x0F) 2995 #define MPI_SAS_PHY0_HWRATE_MIN_RATE_1_5 (0x08) 2996 #define MPI_SAS_PHY0_HWRATE_MIN_RATE_3_0 (0x09) 2997 2998 /* values for SAS PHY Page 0 Flags field */ 2999 #define MPI_SAS_PHY0_FLAGS_SGPIO_DIRECT_ATTACH_ENC (0x01) 3000 3001 /* values for SAS PHY Page 0 PhyInfo field */ 3002 #define MPI_SAS_PHY0_PHYINFO_SATA_PORT_ACTIVE (0x00004000) 3003 #define MPI_SAS_PHY0_PHYINFO_SATA_PORT_SELECTOR (0x00002000) 3004 #define MPI_SAS_PHY0_PHYINFO_VIRTUAL_PHY (0x00001000) 3005 3006 #define MPI_SAS_PHY0_PHYINFO_MASK_PARTIAL_PATHWAY_TIME (0x00000F00) 3007 #define MPI_SAS_PHY0_PHYINFO_SHIFT_PARTIAL_PATHWAY_TIME (8) 3008 3009 #define MPI_SAS_PHY0_PHYINFO_MASK_ROUTING_ATTRIBUTE (0x000000F0) 3010 #define MPI_SAS_PHY0_PHYINFO_DIRECT_ROUTING (0x00000000) 3011 #define MPI_SAS_PHY0_PHYINFO_SUBTRACTIVE_ROUTING (0x00000010) 3012 #define MPI_SAS_PHY0_PHYINFO_TABLE_ROUTING (0x00000020) 3013 3014 #define MPI_SAS_PHY0_PHYINFO_MASK_LINK_RATE (0x0000000F) 3015 #define MPI_SAS_PHY0_PHYINFO_UNKNOWN_LINK_RATE (0x00000000) 3016 #define MPI_SAS_PHY0_PHYINFO_PHY_DISABLED (0x00000001) 3017 #define MPI_SAS_PHY0_PHYINFO_NEGOTIATION_FAILED (0x00000002) 3018 #define MPI_SAS_PHY0_PHYINFO_SATA_OOB_COMPLETE (0x00000003) 3019 #define MPI_SAS_PHY0_PHYINFO_RATE_1_5 (0x00000008) 3020 #define MPI_SAS_PHY0_PHYINFO_RATE_3_0 (0x00000009) 3021 3022 3023 typedef struct _CONFIG_PAGE_SAS_PHY_1 3024 { 3025 CONFIG_EXTENDED_PAGE_HEADER Header; /* 00h */ 3026 U32 Reserved1; /* 08h */ 3027 U32 InvalidDwordCount; /* 0Ch */ 3028 U32 RunningDisparityErrorCount; /* 10h */ 3029 U32 LossDwordSynchCount; /* 14h */ 3030 U32 PhyResetProblemCount; /* 18h */ 3031 } CONFIG_PAGE_SAS_PHY_1, MPI_POINTER PTR_CONFIG_PAGE_SAS_PHY_1, 3032 SasPhyPage1_t, MPI_POINTER pSasPhyPage1_t; 3033 3034 #define MPI_SASPHY1_PAGEVERSION (0x00) 3035 3036 3037 /**************************************************************************** 3038 * SAS Enclosure Config Pages 3039 ****************************************************************************/ 3040 3041 typedef struct _CONFIG_PAGE_SAS_ENCLOSURE_0 3042 { 3043 CONFIG_EXTENDED_PAGE_HEADER Header; /* 00h */ 3044 U32 Reserved1; /* 08h */ 3045 U64 EnclosureLogicalID; /* 0Ch */ 3046 U16 Flags; /* 14h */ 3047 U16 EnclosureHandle; /* 16h */ 3048 U16 NumSlots; /* 18h */ 3049 U16 StartSlot; /* 1Ah */ 3050 U8 StartTargetID; /* 1Ch */ 3051 U8 StartBus; /* 1Dh */ 3052 U8 SEPTargetID; /* 1Eh */ 3053 U8 SEPBus; /* 1Fh */ 3054 U32 Reserved2; /* 20h */ 3055 U32 Reserved3; /* 24h */ 3056 } CONFIG_PAGE_SAS_ENCLOSURE_0, MPI_POINTER PTR_CONFIG_PAGE_SAS_ENCLOSURE_0, 3057 SasEnclosurePage0_t, MPI_POINTER pSasEnclosurePage0_t; 3058 3059 #define MPI_SASENCLOSURE0_PAGEVERSION (0x01) 3060 3061 /* values for SAS Enclosure Page 0 Flags field */ 3062 #define MPI_SAS_ENCLS0_FLAGS_SEP_BUS_ID_VALID (0x0020) 3063 #define MPI_SAS_ENCLS0_FLAGS_START_BUS_ID_VALID (0x0010) 3064 3065 #define MPI_SAS_ENCLS0_FLAGS_MNG_MASK (0x000F) 3066 #define MPI_SAS_ENCLS0_FLAGS_MNG_UNKNOWN (0x0000) 3067 #define MPI_SAS_ENCLS0_FLAGS_MNG_IOC_SES (0x0001) 3068 #define MPI_SAS_ENCLS0_FLAGS_MNG_IOC_SGPIO (0x0002) 3069 #define MPI_SAS_ENCLS0_FLAGS_MNG_EXP_SGPIO (0x0003) 3070 #define MPI_SAS_ENCLS0_FLAGS_MNG_SES_ENCLOSURE (0x0004) 3071 #define MPI_SAS_ENCLS0_FLAGS_MNG_IOC_GPIO (0x0005) 3072 3073 3074 /**************************************************************************** 3075 * Log Config Pages 3076 ****************************************************************************/ 3077 /* 3078 * Host code (drivers, BIOS, utilities, etc.) should leave this define set to 3079 * one and check NumLogEntries at runtime. 3080 */ 3081 #ifndef MPI_LOG_0_NUM_LOG_ENTRIES 3082 #define MPI_LOG_0_NUM_LOG_ENTRIES (1) 3083 #endif 3084 3085 #define MPI_LOG_0_LOG_DATA_LENGTH (0x1C) 3086 3087 typedef struct _MPI_LOG_0_ENTRY 3088 { 3089 U32 TimeStamp; /* 00h */ 3090 U32 Reserved1; /* 04h */ 3091 U16 LogSequence; /* 08h */ 3092 U16 LogEntryQualifier; /* 0Ah */ 3093 U8 LogData[MPI_LOG_0_LOG_DATA_LENGTH]; /* 0Ch */ 3094 } MPI_LOG_0_ENTRY, MPI_POINTER PTR_MPI_LOG_0_ENTRY, 3095 MpiLog0Entry_t, MPI_POINTER pMpiLog0Entry_t; 3096 3097 /* values for Log Page 0 LogEntry LogEntryQualifier field */ 3098 #define MPI_LOG_0_ENTRY_QUAL_ENTRY_UNUSED (0x0000) 3099 #define MPI_LOG_0_ENTRY_QUAL_POWER_ON_RESET (0x0001) 3100 3101 typedef struct _CONFIG_PAGE_LOG_0 3102 { 3103 CONFIG_EXTENDED_PAGE_HEADER Header; /* 00h */ 3104 U32 Reserved1; /* 08h */ 3105 U32 Reserved2; /* 0Ch */ 3106 U16 NumLogEntries; /* 10h */ 3107 U16 Reserved3; /* 12h */ 3108 MPI_LOG_0_ENTRY LogEntry[MPI_LOG_0_NUM_LOG_ENTRIES]; /* 14h */ 3109 } CONFIG_PAGE_LOG_0, MPI_POINTER PTR_CONFIG_PAGE_LOG_0, 3110 LogPage0_t, MPI_POINTER pLogPage0_t; 3111 3112 #define MPI_LOG_0_PAGEVERSION (0x01) 3113 3114 3115 #endif 3116 3117