• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1 /***********************license start***************
2  * Author: Cavium Networks
3  *
4  * Contact: support@caviumnetworks.com
5  * This file is part of the OCTEON SDK
6  *
7  * Copyright (c) 2003-2008 Cavium Networks
8  *
9  * This file is free software; you can redistribute it and/or modify
10  * it under the terms of the GNU General Public License, Version 2, as
11  * published by the Free Software Foundation.
12  *
13  * This file is distributed in the hope that it will be useful, but
14  * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
15  * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
16  * NONINFRINGEMENT.  See the GNU General Public License for more
17  * details.
18  *
19  * You should have received a copy of the GNU General Public License
20  * along with this file; if not, write to the Free Software
21  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
22  * or visit http://www.gnu.org/licenses/.
23  *
24  * This file may also be available under a different license from Cavium.
25  * Contact Cavium Networks for more information
26  ***********************license end**************************************/
27 
28 /*
29  *
30  * Interface to the SMI/MDIO hardware, including support for both IEEE 802.3
31  * clause 22 and clause 45 operations.
32  *
33  */
34 
35 #ifndef __CVMX_MIO_H__
36 #define __CVMX_MIO_H__
37 
38 #include "cvmx-smix-defs.h"
39 
40 /**
41  * PHY register 0 from the 802.3 spec
42  */
43 #define CVMX_MDIO_PHY_REG_CONTROL 0
44 typedef union {
45 	uint16_t u16;
46 	struct {
47 		uint16_t reset:1;
48 		uint16_t loopback:1;
49 		uint16_t speed_lsb:1;
50 		uint16_t autoneg_enable:1;
51 		uint16_t power_down:1;
52 		uint16_t isolate:1;
53 		uint16_t restart_autoneg:1;
54 		uint16_t duplex:1;
55 		uint16_t collision_test:1;
56 		uint16_t speed_msb:1;
57 		uint16_t unidirectional_enable:1;
58 		uint16_t reserved_0_4:5;
59 	} s;
60 } cvmx_mdio_phy_reg_control_t;
61 
62 /**
63  * PHY register 1 from the 802.3 spec
64  */
65 #define CVMX_MDIO_PHY_REG_STATUS 1
66 typedef union {
67 	uint16_t u16;
68 	struct {
69 		uint16_t capable_100base_t4:1;
70 		uint16_t capable_100base_x_full:1;
71 		uint16_t capable_100base_x_half:1;
72 		uint16_t capable_10_full:1;
73 		uint16_t capable_10_half:1;
74 		uint16_t capable_100base_t2_full:1;
75 		uint16_t capable_100base_t2_half:1;
76 		uint16_t capable_extended_status:1;
77 		uint16_t capable_unidirectional:1;
78 		uint16_t capable_mf_preamble_suppression:1;
79 		uint16_t autoneg_complete:1;
80 		uint16_t remote_fault:1;
81 		uint16_t capable_autoneg:1;
82 		uint16_t link_status:1;
83 		uint16_t jabber_detect:1;
84 		uint16_t capable_extended_registers:1;
85 
86 	} s;
87 } cvmx_mdio_phy_reg_status_t;
88 
89 /**
90  * PHY register 2 from the 802.3 spec
91  */
92 #define CVMX_MDIO_PHY_REG_ID1 2
93 typedef union {
94 	uint16_t u16;
95 	struct {
96 		uint16_t oui_bits_3_18;
97 	} s;
98 } cvmx_mdio_phy_reg_id1_t;
99 
100 /**
101  * PHY register 3 from the 802.3 spec
102  */
103 #define CVMX_MDIO_PHY_REG_ID2 3
104 typedef union {
105 	uint16_t u16;
106 	struct {
107 		uint16_t oui_bits_19_24:6;
108 		uint16_t model:6;
109 		uint16_t revision:4;
110 	} s;
111 } cvmx_mdio_phy_reg_id2_t;
112 
113 /**
114  * PHY register 4 from the 802.3 spec
115  */
116 #define CVMX_MDIO_PHY_REG_AUTONEG_ADVER 4
117 typedef union {
118 	uint16_t u16;
119 	struct {
120 		uint16_t next_page:1;
121 		uint16_t reserved_14:1;
122 		uint16_t remote_fault:1;
123 		uint16_t reserved_12:1;
124 		uint16_t asymmetric_pause:1;
125 		uint16_t pause:1;
126 		uint16_t advert_100base_t4:1;
127 		uint16_t advert_100base_tx_full:1;
128 		uint16_t advert_100base_tx_half:1;
129 		uint16_t advert_10base_tx_full:1;
130 		uint16_t advert_10base_tx_half:1;
131 		uint16_t selector:5;
132 	} s;
133 } cvmx_mdio_phy_reg_autoneg_adver_t;
134 
135 /**
136  * PHY register 5 from the 802.3 spec
137  */
138 #define CVMX_MDIO_PHY_REG_LINK_PARTNER_ABILITY 5
139 typedef union {
140 	uint16_t u16;
141 	struct {
142 		uint16_t next_page:1;
143 		uint16_t ack:1;
144 		uint16_t remote_fault:1;
145 		uint16_t reserved_12:1;
146 		uint16_t asymmetric_pause:1;
147 		uint16_t pause:1;
148 		uint16_t advert_100base_t4:1;
149 		uint16_t advert_100base_tx_full:1;
150 		uint16_t advert_100base_tx_half:1;
151 		uint16_t advert_10base_tx_full:1;
152 		uint16_t advert_10base_tx_half:1;
153 		uint16_t selector:5;
154 	} s;
155 } cvmx_mdio_phy_reg_link_partner_ability_t;
156 
157 /**
158  * PHY register 6 from the 802.3 spec
159  */
160 #define CVMX_MDIO_PHY_REG_AUTONEG_EXPANSION 6
161 typedef union {
162 	uint16_t u16;
163 	struct {
164 		uint16_t reserved_5_15:11;
165 		uint16_t parallel_detection_fault:1;
166 		uint16_t link_partner_next_page_capable:1;
167 		uint16_t local_next_page_capable:1;
168 		uint16_t page_received:1;
169 		uint16_t link_partner_autoneg_capable:1;
170 
171 	} s;
172 } cvmx_mdio_phy_reg_autoneg_expansion_t;
173 
174 /**
175  * PHY register 9 from the 802.3 spec
176  */
177 #define CVMX_MDIO_PHY_REG_CONTROL_1000 9
178 typedef union {
179 	uint16_t u16;
180 	struct {
181 		uint16_t test_mode:3;
182 		uint16_t manual_master_slave:1;
183 		uint16_t master:1;
184 		uint16_t port_type:1;
185 		uint16_t advert_1000base_t_full:1;
186 		uint16_t advert_1000base_t_half:1;
187 		uint16_t reserved_0_7:8;
188 	} s;
189 } cvmx_mdio_phy_reg_control_1000_t;
190 
191 /**
192  * PHY register 10 from the 802.3 spec
193  */
194 #define CVMX_MDIO_PHY_REG_STATUS_1000 10
195 typedef union {
196 	uint16_t u16;
197 	struct {
198 		uint16_t master_slave_fault:1;
199 		uint16_t is_master:1;
200 		uint16_t local_receiver_ok:1;
201 		uint16_t remote_receiver_ok:1;
202 		uint16_t remote_capable_1000base_t_full:1;
203 		uint16_t remote_capable_1000base_t_half:1;
204 		uint16_t reserved_8_9:2;
205 		uint16_t idle_error_count:8;
206 	} s;
207 } cvmx_mdio_phy_reg_status_1000_t;
208 
209 /**
210  * PHY register 15 from the 802.3 spec
211  */
212 #define CVMX_MDIO_PHY_REG_EXTENDED_STATUS 15
213 typedef union {
214 	uint16_t u16;
215 	struct {
216 		uint16_t capable_1000base_x_full:1;
217 		uint16_t capable_1000base_x_half:1;
218 		uint16_t capable_1000base_t_full:1;
219 		uint16_t capable_1000base_t_half:1;
220 		uint16_t reserved_0_11:12;
221 	} s;
222 } cvmx_mdio_phy_reg_extended_status_t;
223 
224 /**
225  * PHY register 13 from the 802.3 spec
226  */
227 #define CVMX_MDIO_PHY_REG_MMD_CONTROL 13
228 typedef union {
229 	uint16_t u16;
230 	struct {
231 		uint16_t function:2;
232 		uint16_t reserved_5_13:9;
233 		uint16_t devad:5;
234 	} s;
235 } cvmx_mdio_phy_reg_mmd_control_t;
236 
237 /**
238  * PHY register 14 from the 802.3 spec
239  */
240 #define CVMX_MDIO_PHY_REG_MMD_ADDRESS_DATA 14
241 typedef union {
242 	uint16_t u16;
243 	struct {
244 		uint16_t address_data:16;
245 	} s;
246 } cvmx_mdio_phy_reg_mmd_address_data_t;
247 
248 /* Operating request encodings. */
249 #define MDIO_CLAUSE_22_WRITE    0
250 #define MDIO_CLAUSE_22_READ     1
251 
252 #define MDIO_CLAUSE_45_ADDRESS  0
253 #define MDIO_CLAUSE_45_WRITE    1
254 #define MDIO_CLAUSE_45_READ_INC 2
255 #define MDIO_CLAUSE_45_READ     3
256 
257 /* MMD identifiers, mostly for accessing devices within XENPAK modules. */
258 #define CVMX_MMD_DEVICE_PMA_PMD      1
259 #define CVMX_MMD_DEVICE_WIS          2
260 #define CVMX_MMD_DEVICE_PCS          3
261 #define CVMX_MMD_DEVICE_PHY_XS       4
262 #define CVMX_MMD_DEVICE_DTS_XS       5
263 #define CVMX_MMD_DEVICE_TC           6
264 #define CVMX_MMD_DEVICE_CL22_EXT     29
265 #define CVMX_MMD_DEVICE_VENDOR_1     30
266 #define CVMX_MMD_DEVICE_VENDOR_2     31
267 
268 /* Helper function to put MDIO interface into clause 45 mode */
__cvmx_mdio_set_clause45_mode(int bus_id)269 static inline void __cvmx_mdio_set_clause45_mode(int bus_id)
270 {
271 	union cvmx_smix_clk smi_clk;
272 	/* Put bus into clause 45 mode */
273 	smi_clk.u64 = cvmx_read_csr(CVMX_SMIX_CLK(bus_id));
274 	smi_clk.s.mode = 1;
275 	smi_clk.s.preamble = 1;
276 	cvmx_write_csr(CVMX_SMIX_CLK(bus_id), smi_clk.u64);
277 }
278 
279 /* Helper function to put MDIO interface into clause 22 mode */
__cvmx_mdio_set_clause22_mode(int bus_id)280 static inline void __cvmx_mdio_set_clause22_mode(int bus_id)
281 {
282 	union cvmx_smix_clk smi_clk;
283 	/* Put bus into clause 22 mode */
284 	smi_clk.u64 = cvmx_read_csr(CVMX_SMIX_CLK(bus_id));
285 	smi_clk.s.mode = 0;
286 	cvmx_write_csr(CVMX_SMIX_CLK(bus_id), smi_clk.u64);
287 }
288 
289 /**
290  * Perform an MII read. This function is used to read PHY
291  * registers controlling auto negotiation.
292  *
293  * @bus_id:   MDIO bus number. Zero on most chips, but some chips (ex CN56XX)
294  *                 support multiple busses.
295  * @phy_id:   The MII phy id
296  * @location: Register location to read
297  *
298  * Returns Result from the read or -1 on failure
299  */
cvmx_mdio_read(int bus_id,int phy_id,int location)300 static inline int cvmx_mdio_read(int bus_id, int phy_id, int location)
301 {
302 	union cvmx_smix_cmd smi_cmd;
303 	union cvmx_smix_rd_dat smi_rd;
304 	int timeout = 1000;
305 
306 	if (octeon_has_feature(OCTEON_FEATURE_MDIO_CLAUSE_45))
307 		__cvmx_mdio_set_clause22_mode(bus_id);
308 
309 	smi_cmd.u64 = 0;
310 	smi_cmd.s.phy_op = MDIO_CLAUSE_22_READ;
311 	smi_cmd.s.phy_adr = phy_id;
312 	smi_cmd.s.reg_adr = location;
313 	cvmx_write_csr(CVMX_SMIX_CMD(bus_id), smi_cmd.u64);
314 
315 	do {
316 		cvmx_wait(1000);
317 		smi_rd.u64 = cvmx_read_csr(CVMX_SMIX_RD_DAT(bus_id));
318 	} while (smi_rd.s.pending && timeout--);
319 
320 	if (smi_rd.s.val)
321 		return smi_rd.s.dat;
322 	else
323 		return -1;
324 }
325 
326 /**
327  * Perform an MII write. This function is used to write PHY
328  * registers controlling auto negotiation.
329  *
330  * @bus_id:   MDIO bus number. Zero on most chips, but some chips (ex CN56XX)
331  *                 support multiple busses.
332  * @phy_id:   The MII phy id
333  * @location: Register location to write
334  * @val:      Value to write
335  *
336  * Returns -1 on error
337  *         0 on success
338  */
cvmx_mdio_write(int bus_id,int phy_id,int location,int val)339 static inline int cvmx_mdio_write(int bus_id, int phy_id, int location, int val)
340 {
341 	union cvmx_smix_cmd smi_cmd;
342 	union cvmx_smix_wr_dat smi_wr;
343 	int timeout = 1000;
344 
345 	if (octeon_has_feature(OCTEON_FEATURE_MDIO_CLAUSE_45))
346 		__cvmx_mdio_set_clause22_mode(bus_id);
347 
348 	smi_wr.u64 = 0;
349 	smi_wr.s.dat = val;
350 	cvmx_write_csr(CVMX_SMIX_WR_DAT(bus_id), smi_wr.u64);
351 
352 	smi_cmd.u64 = 0;
353 	smi_cmd.s.phy_op = MDIO_CLAUSE_22_WRITE;
354 	smi_cmd.s.phy_adr = phy_id;
355 	smi_cmd.s.reg_adr = location;
356 	cvmx_write_csr(CVMX_SMIX_CMD(bus_id), smi_cmd.u64);
357 
358 	do {
359 		cvmx_wait(1000);
360 		smi_wr.u64 = cvmx_read_csr(CVMX_SMIX_WR_DAT(bus_id));
361 	} while (smi_wr.s.pending && --timeout);
362 	if (timeout <= 0)
363 		return -1;
364 
365 	return 0;
366 }
367 
368 /**
369  * Perform an IEEE 802.3 clause 45 MII read. This function is used to
370  * read PHY registers controlling auto negotiation.
371  *
372  * @bus_id:   MDIO bus number. Zero on most chips, but some chips (ex CN56XX)
373  *                 support multiple busses.
374  * @phy_id:   The MII phy id
375  * @device:   MDIO Managable Device (MMD) id
376  * @location: Register location to read
377  *
378  * Returns Result from the read or -1 on failure
379  */
380 
cvmx_mdio_45_read(int bus_id,int phy_id,int device,int location)381 static inline int cvmx_mdio_45_read(int bus_id, int phy_id, int device,
382 				    int location)
383 {
384 	union cvmx_smix_cmd smi_cmd;
385 	union cvmx_smix_rd_dat smi_rd;
386 	union cvmx_smix_wr_dat smi_wr;
387 	int timeout = 1000;
388 
389 	if (!octeon_has_feature(OCTEON_FEATURE_MDIO_CLAUSE_45))
390 		return -1;
391 
392 	__cvmx_mdio_set_clause45_mode(bus_id);
393 
394 	smi_wr.u64 = 0;
395 	smi_wr.s.dat = location;
396 	cvmx_write_csr(CVMX_SMIX_WR_DAT(bus_id), smi_wr.u64);
397 
398 	smi_cmd.u64 = 0;
399 	smi_cmd.s.phy_op = MDIO_CLAUSE_45_ADDRESS;
400 	smi_cmd.s.phy_adr = phy_id;
401 	smi_cmd.s.reg_adr = device;
402 	cvmx_write_csr(CVMX_SMIX_CMD(bus_id), smi_cmd.u64);
403 
404 	do {
405 		cvmx_wait(1000);
406 		smi_wr.u64 = cvmx_read_csr(CVMX_SMIX_WR_DAT(bus_id));
407 	} while (smi_wr.s.pending && --timeout);
408 	if (timeout <= 0) {
409 		cvmx_dprintf("cvmx_mdio_45_read: bus_id %d phy_id %2d "
410 			     "device %2d register %2d   TIME OUT(address)\n",
411 		     bus_id, phy_id, device, location);
412 		return -1;
413 	}
414 
415 	smi_cmd.u64 = 0;
416 	smi_cmd.s.phy_op = MDIO_CLAUSE_45_READ;
417 	smi_cmd.s.phy_adr = phy_id;
418 	smi_cmd.s.reg_adr = device;
419 	cvmx_write_csr(CVMX_SMIX_CMD(bus_id), smi_cmd.u64);
420 
421 	do {
422 		cvmx_wait(1000);
423 		smi_rd.u64 = cvmx_read_csr(CVMX_SMIX_RD_DAT(bus_id));
424 	} while (smi_rd.s.pending && --timeout);
425 
426 	if (timeout <= 0) {
427 		cvmx_dprintf("cvmx_mdio_45_read: bus_id %d phy_id %2d "
428 			     "device %2d register %2d   TIME OUT(data)\n",
429 		     bus_id, phy_id, device, location);
430 		return -1;
431 	}
432 
433 	if (smi_rd.s.val)
434 		return smi_rd.s.dat;
435 	else {
436 		cvmx_dprintf("cvmx_mdio_45_read: bus_id %d phy_id %2d "
437 			     "device %2d register %2d   INVALID READ\n",
438 		     bus_id, phy_id, device, location);
439 		return -1;
440 	}
441 }
442 
443 /**
444  * Perform an IEEE 802.3 clause 45 MII write. This function is used to
445  * write PHY registers controlling auto negotiation.
446  *
447  * @bus_id:   MDIO bus number. Zero on most chips, but some chips (ex CN56XX)
448  *                 support multiple busses.
449  * @phy_id:   The MII phy id
450  * @device:   MDIO Managable Device (MMD) id
451  * @location: Register location to write
452  * @val:      Value to write
453  *
454  * Returns -1 on error
455  *         0 on success
456  */
cvmx_mdio_45_write(int bus_id,int phy_id,int device,int location,int val)457 static inline int cvmx_mdio_45_write(int bus_id, int phy_id, int device,
458 				     int location, int val)
459 {
460 	union cvmx_smix_cmd smi_cmd;
461 	union cvmx_smix_wr_dat smi_wr;
462 	int timeout = 1000;
463 
464 	if (!octeon_has_feature(OCTEON_FEATURE_MDIO_CLAUSE_45))
465 		return -1;
466 
467 	__cvmx_mdio_set_clause45_mode(bus_id);
468 
469 	smi_wr.u64 = 0;
470 	smi_wr.s.dat = location;
471 	cvmx_write_csr(CVMX_SMIX_WR_DAT(bus_id), smi_wr.u64);
472 
473 	smi_cmd.u64 = 0;
474 	smi_cmd.s.phy_op = MDIO_CLAUSE_45_ADDRESS;
475 	smi_cmd.s.phy_adr = phy_id;
476 	smi_cmd.s.reg_adr = device;
477 	cvmx_write_csr(CVMX_SMIX_CMD(bus_id), smi_cmd.u64);
478 
479 	do {
480 		cvmx_wait(1000);
481 		smi_wr.u64 = cvmx_read_csr(CVMX_SMIX_WR_DAT(bus_id));
482 	} while (smi_wr.s.pending && --timeout);
483 	if (timeout <= 0)
484 		return -1;
485 
486 	smi_wr.u64 = 0;
487 	smi_wr.s.dat = val;
488 	cvmx_write_csr(CVMX_SMIX_WR_DAT(bus_id), smi_wr.u64);
489 
490 	smi_cmd.u64 = 0;
491 	smi_cmd.s.phy_op = MDIO_CLAUSE_45_WRITE;
492 	smi_cmd.s.phy_adr = phy_id;
493 	smi_cmd.s.reg_adr = device;
494 	cvmx_write_csr(CVMX_SMIX_CMD(bus_id), smi_cmd.u64);
495 
496 	do {
497 		cvmx_wait(1000);
498 		smi_wr.u64 = cvmx_read_csr(CVMX_SMIX_WR_DAT(bus_id));
499 	} while (smi_wr.s.pending && --timeout);
500 	if (timeout <= 0)
501 		return -1;
502 
503 	return 0;
504 }
505 
506 #endif
507