1 /*
2 Copyright (C) 2010 Willow Garage <http://www.willowgarage.com>
3 Copyright (C) 2004 - 2010 Ivo van Doorn <IvDoorn@gmail.com>
4 Copyright (C) 2004 - 2009 Gertjan van Wingerde <gwingerde@gmail.com>
5 <http://rt2x00.serialmonkey.com>
6
7 This program is free software; you can redistribute it and/or modify
8 it under the terms of the GNU General Public License as published by
9 the Free Software Foundation; either version 2 of the License, or
10 (at your option) any later version.
11
12 This program is distributed in the hope that it will be useful,
13 but WITHOUT ANY WARRANTY; without even the implied warranty of
14 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 GNU General Public License for more details.
16
17 You should have received a copy of the GNU General Public License
18 along with this program; if not, write to the
19 Free Software Foundation, Inc.,
20 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
21 */
22
23 /*
24 Module: rt2x00
25 Abstract: rt2x00 global information.
26 */
27
28 #ifndef RT2X00_H
29 #define RT2X00_H
30
31 #include <linux/bitops.h>
32 #include <linux/interrupt.h>
33 #include <linux/skbuff.h>
34 #include <linux/workqueue.h>
35 #include <linux/firmware.h>
36 #include <linux/leds.h>
37 #include <linux/mutex.h>
38 #include <linux/etherdevice.h>
39 #include <linux/input-polldev.h>
40 #include <linux/kfifo.h>
41 #include <linux/hrtimer.h>
42
43 #include <net/mac80211.h>
44
45 #include "rt2x00debug.h"
46 #include "rt2x00dump.h"
47 #include "rt2x00leds.h"
48 #include "rt2x00reg.h"
49 #include "rt2x00queue.h"
50
51 /*
52 * Module information.
53 */
54 #define DRV_VERSION "2.3.0"
55 #define DRV_PROJECT "http://rt2x00.serialmonkey.com"
56
57 /*
58 * Debug definitions.
59 * Debug output has to be enabled during compile time.
60 */
61 #define DEBUG_PRINTK_MSG(__dev, __kernlvl, __lvl, __msg, __args...) \
62 printk(__kernlvl "%s -> %s: %s - " __msg, \
63 wiphy_name((__dev)->hw->wiphy), __func__, __lvl, ##__args)
64
65 #define DEBUG_PRINTK_PROBE(__kernlvl, __lvl, __msg, __args...) \
66 printk(__kernlvl "%s -> %s: %s - " __msg, \
67 KBUILD_MODNAME, __func__, __lvl, ##__args)
68
69 #ifdef CONFIG_RT2X00_DEBUG
70 #define DEBUG_PRINTK(__dev, __kernlvl, __lvl, __msg, __args...) \
71 DEBUG_PRINTK_MSG(__dev, __kernlvl, __lvl, __msg, ##__args)
72 #else
73 #define DEBUG_PRINTK(__dev, __kernlvl, __lvl, __msg, __args...) \
74 do { } while (0)
75 #endif /* CONFIG_RT2X00_DEBUG */
76
77 /*
78 * Various debug levels.
79 * The debug levels PANIC and ERROR both indicate serious problems,
80 * for this reason they should never be ignored.
81 * The special ERROR_PROBE message is for messages that are generated
82 * when the rt2x00_dev is not yet initialized.
83 */
84 #define PANIC(__dev, __msg, __args...) \
85 DEBUG_PRINTK_MSG(__dev, KERN_CRIT, "Panic", __msg, ##__args)
86 #define ERROR(__dev, __msg, __args...) \
87 DEBUG_PRINTK_MSG(__dev, KERN_ERR, "Error", __msg, ##__args)
88 #define ERROR_PROBE(__msg, __args...) \
89 DEBUG_PRINTK_PROBE(KERN_ERR, "Error", __msg, ##__args)
90 #define WARNING(__dev, __msg, __args...) \
91 DEBUG_PRINTK(__dev, KERN_WARNING, "Warning", __msg, ##__args)
92 #define NOTICE(__dev, __msg, __args...) \
93 DEBUG_PRINTK(__dev, KERN_NOTICE, "Notice", __msg, ##__args)
94 #define INFO(__dev, __msg, __args...) \
95 DEBUG_PRINTK(__dev, KERN_INFO, "Info", __msg, ##__args)
96 #define DEBUG(__dev, __msg, __args...) \
97 DEBUG_PRINTK(__dev, KERN_DEBUG, "Debug", __msg, ##__args)
98 #define EEPROM(__dev, __msg, __args...) \
99 DEBUG_PRINTK(__dev, KERN_DEBUG, "EEPROM recovery", __msg, ##__args)
100
101 /*
102 * Duration calculations
103 * The rate variable passed is: 100kbs.
104 * To convert from bytes to bits we multiply size with 8,
105 * then the size is multiplied with 10 to make the
106 * real rate -> rate argument correction.
107 */
108 #define GET_DURATION(__size, __rate) (((__size) * 8 * 10) / (__rate))
109 #define GET_DURATION_RES(__size, __rate)(((__size) * 8 * 10) % (__rate))
110
111 /*
112 * Determine the number of L2 padding bytes required between the header and
113 * the payload.
114 */
115 #define L2PAD_SIZE(__hdrlen) (-(__hdrlen) & 3)
116
117 /*
118 * Determine the alignment requirement,
119 * to make sure the 802.11 payload is padded to a 4-byte boundrary
120 * we must determine the address of the payload and calculate the
121 * amount of bytes needed to move the data.
122 */
123 #define ALIGN_SIZE(__skb, __header) \
124 ( ((unsigned long)((__skb)->data + (__header))) & 3 )
125
126 /*
127 * Constants for extra TX headroom for alignment purposes.
128 */
129 #define RT2X00_ALIGN_SIZE 4 /* Only whole frame needs alignment */
130 #define RT2X00_L2PAD_SIZE 8 /* Both header & payload need alignment */
131
132 /*
133 * Standard timing and size defines.
134 * These values should follow the ieee80211 specifications.
135 */
136 #define ACK_SIZE 14
137 #define IEEE80211_HEADER 24
138 #define PLCP 48
139 #define BEACON 100
140 #define PREAMBLE 144
141 #define SHORT_PREAMBLE 72
142 #define SLOT_TIME 20
143 #define SHORT_SLOT_TIME 9
144 #define SIFS 10
145 #define PIFS ( SIFS + SLOT_TIME )
146 #define SHORT_PIFS ( SIFS + SHORT_SLOT_TIME )
147 #define DIFS ( PIFS + SLOT_TIME )
148 #define SHORT_DIFS ( SHORT_PIFS + SHORT_SLOT_TIME )
149 #define EIFS ( SIFS + DIFS + \
150 GET_DURATION(IEEE80211_HEADER + ACK_SIZE, 10) )
151 #define SHORT_EIFS ( SIFS + SHORT_DIFS + \
152 GET_DURATION(IEEE80211_HEADER + ACK_SIZE, 10) )
153
154 /*
155 * Structure for average calculation
156 * The avg field contains the actual average value,
157 * but avg_weight is internally used during calculations
158 * to prevent rounding errors.
159 */
160 struct avg_val {
161 int avg;
162 int avg_weight;
163 };
164
165 enum rt2x00_chip_intf {
166 RT2X00_CHIP_INTF_PCI,
167 RT2X00_CHIP_INTF_PCIE,
168 RT2X00_CHIP_INTF_USB,
169 RT2X00_CHIP_INTF_SOC,
170 };
171
172 /*
173 * Chipset identification
174 * The chipset on the device is composed of a RT and RF chip.
175 * The chipset combination is important for determining device capabilities.
176 */
177 struct rt2x00_chip {
178 u16 rt;
179 #define RT2460 0x2460
180 #define RT2560 0x2560
181 #define RT2570 0x2570
182 #define RT2661 0x2661
183 #define RT2573 0x2573
184 #define RT2860 0x2860 /* 2.4GHz */
185 #define RT2872 0x2872 /* WSOC */
186 #define RT2883 0x2883 /* WSOC */
187 #define RT3070 0x3070
188 #define RT3071 0x3071
189 #define RT3090 0x3090 /* 2.4GHz PCIe */
190 #define RT3390 0x3390
191 #define RT3572 0x3572
192 #define RT3593 0x3593
193 #define RT3883 0x3883 /* WSOC */
194 #define RT5390 0x5390 /* 2.4GHz */
195 #define RT5392 0x5392 /* 2.4GHz */
196
197 u16 rf;
198 u16 rev;
199
200 enum rt2x00_chip_intf intf;
201 };
202
203 /*
204 * RF register values that belong to a particular channel.
205 */
206 struct rf_channel {
207 int channel;
208 u32 rf1;
209 u32 rf2;
210 u32 rf3;
211 u32 rf4;
212 };
213
214 /*
215 * Channel information structure
216 */
217 struct channel_info {
218 unsigned int flags;
219 #define GEOGRAPHY_ALLOWED 0x00000001
220
221 short max_power;
222 short default_power1;
223 short default_power2;
224 };
225
226 /*
227 * Antenna setup values.
228 */
229 struct antenna_setup {
230 enum antenna rx;
231 enum antenna tx;
232 u8 rx_chain_num;
233 u8 tx_chain_num;
234 };
235
236 /*
237 * Quality statistics about the currently active link.
238 */
239 struct link_qual {
240 /*
241 * Statistics required for Link tuning by driver
242 * The rssi value is provided by rt2x00lib during the
243 * link_tuner() callback function.
244 * The false_cca field is filled during the link_stats()
245 * callback function and could be used during the
246 * link_tuner() callback function.
247 */
248 int rssi;
249 int false_cca;
250
251 /*
252 * VGC levels
253 * Hardware driver will tune the VGC level during each call
254 * to the link_tuner() callback function. This vgc_level is
255 * is determined based on the link quality statistics like
256 * average RSSI and the false CCA count.
257 *
258 * In some cases the drivers need to differentiate between
259 * the currently "desired" VGC level and the level configured
260 * in the hardware. The latter is important to reduce the
261 * number of BBP register reads to reduce register access
262 * overhead. For this reason we store both values here.
263 */
264 u8 vgc_level;
265 u8 vgc_level_reg;
266
267 /*
268 * Statistics required for Signal quality calculation.
269 * These fields might be changed during the link_stats()
270 * callback function.
271 */
272 int rx_success;
273 int rx_failed;
274 int tx_success;
275 int tx_failed;
276 };
277
278 /*
279 * Antenna settings about the currently active link.
280 */
281 struct link_ant {
282 /*
283 * Antenna flags
284 */
285 unsigned int flags;
286 #define ANTENNA_RX_DIVERSITY 0x00000001
287 #define ANTENNA_TX_DIVERSITY 0x00000002
288 #define ANTENNA_MODE_SAMPLE 0x00000004
289
290 /*
291 * Currently active TX/RX antenna setup.
292 * When software diversity is used, this will indicate
293 * which antenna is actually used at this time.
294 */
295 struct antenna_setup active;
296
297 /*
298 * RSSI history information for the antenna.
299 * Used to determine when to switch antenna
300 * when using software diversity.
301 */
302 int rssi_history;
303
304 /*
305 * Current RSSI average of the currently active antenna.
306 * Similar to the avg_rssi in the link_qual structure
307 * this value is updated by using the walking average.
308 */
309 struct avg_val rssi_ant;
310 };
311
312 /*
313 * To optimize the quality of the link we need to store
314 * the quality of received frames and periodically
315 * optimize the link.
316 */
317 struct link {
318 /*
319 * Link tuner counter
320 * The number of times the link has been tuned
321 * since the radio has been switched on.
322 */
323 u32 count;
324
325 /*
326 * Quality measurement values.
327 */
328 struct link_qual qual;
329
330 /*
331 * TX/RX antenna setup.
332 */
333 struct link_ant ant;
334
335 /*
336 * Currently active average RSSI value
337 */
338 struct avg_val avg_rssi;
339
340 /*
341 * Work structure for scheduling periodic link tuning.
342 */
343 struct delayed_work work;
344
345 /*
346 * Work structure for scheduling periodic watchdog monitoring.
347 * This work must be scheduled on the kernel workqueue, while
348 * all other work structures must be queued on the mac80211
349 * workqueue. This guarantees that the watchdog can schedule
350 * other work structures and wait for their completion in order
351 * to bring the device/driver back into the desired state.
352 */
353 struct delayed_work watchdog_work;
354
355 /*
356 * Work structure for scheduling periodic AGC adjustments.
357 */
358 struct delayed_work agc_work;
359
360 /*
361 * Work structure for scheduling periodic VCO calibration.
362 */
363 struct delayed_work vco_work;
364 };
365
366 enum rt2x00_delayed_flags {
367 DELAYED_UPDATE_BEACON,
368 };
369
370 /*
371 * Interface structure
372 * Per interface configuration details, this structure
373 * is allocated as the private data for ieee80211_vif.
374 */
375 struct rt2x00_intf {
376 /*
377 * beacon->skb must be protected with the mutex.
378 */
379 struct mutex beacon_skb_mutex;
380
381 /*
382 * Entry in the beacon queue which belongs to
383 * this interface. Each interface has its own
384 * dedicated beacon entry.
385 */
386 struct queue_entry *beacon;
387 bool enable_beacon;
388
389 /*
390 * Actions that needed rescheduling.
391 */
392 unsigned long delayed_flags;
393
394 /*
395 * Software sequence counter, this is only required
396 * for hardware which doesn't support hardware
397 * sequence counting.
398 */
399 atomic_t seqno;
400 };
401
vif_to_intf(struct ieee80211_vif * vif)402 static inline struct rt2x00_intf* vif_to_intf(struct ieee80211_vif *vif)
403 {
404 return (struct rt2x00_intf *)vif->drv_priv;
405 }
406
407 /**
408 * struct hw_mode_spec: Hardware specifications structure
409 *
410 * Details about the supported modes, rates and channels
411 * of a particular chipset. This is used by rt2x00lib
412 * to build the ieee80211_hw_mode array for mac80211.
413 *
414 * @supported_bands: Bitmask contained the supported bands (2.4GHz, 5.2GHz).
415 * @supported_rates: Rate types which are supported (CCK, OFDM).
416 * @num_channels: Number of supported channels. This is used as array size
417 * for @tx_power_a, @tx_power_bg and @channels.
418 * @channels: Device/chipset specific channel values (See &struct rf_channel).
419 * @channels_info: Additional information for channels (See &struct channel_info).
420 * @ht: Driver HT Capabilities (See &ieee80211_sta_ht_cap).
421 */
422 struct hw_mode_spec {
423 unsigned int supported_bands;
424 #define SUPPORT_BAND_2GHZ 0x00000001
425 #define SUPPORT_BAND_5GHZ 0x00000002
426
427 unsigned int supported_rates;
428 #define SUPPORT_RATE_CCK 0x00000001
429 #define SUPPORT_RATE_OFDM 0x00000002
430
431 unsigned int num_channels;
432 const struct rf_channel *channels;
433 const struct channel_info *channels_info;
434
435 struct ieee80211_sta_ht_cap ht;
436 };
437
438 /*
439 * Configuration structure wrapper around the
440 * mac80211 configuration structure.
441 * When mac80211 configures the driver, rt2x00lib
442 * can precalculate values which are equal for all
443 * rt2x00 drivers. Those values can be stored in here.
444 */
445 struct rt2x00lib_conf {
446 struct ieee80211_conf *conf;
447
448 struct rf_channel rf;
449 struct channel_info channel;
450 };
451
452 /*
453 * Configuration structure for erp settings.
454 */
455 struct rt2x00lib_erp {
456 int short_preamble;
457 int cts_protection;
458
459 u32 basic_rates;
460
461 int slot_time;
462
463 short sifs;
464 short pifs;
465 short difs;
466 short eifs;
467
468 u16 beacon_int;
469 u16 ht_opmode;
470 };
471
472 /*
473 * Configuration structure for hardware encryption.
474 */
475 struct rt2x00lib_crypto {
476 enum cipher cipher;
477
478 enum set_key_cmd cmd;
479 const u8 *address;
480
481 u32 bssidx;
482
483 u8 key[16];
484 u8 tx_mic[8];
485 u8 rx_mic[8];
486
487 int wcid;
488 };
489
490 /*
491 * Configuration structure wrapper around the
492 * rt2x00 interface configuration handler.
493 */
494 struct rt2x00intf_conf {
495 /*
496 * Interface type
497 */
498 enum nl80211_iftype type;
499
500 /*
501 * TSF sync value, this is dependent on the operation type.
502 */
503 enum tsf_sync sync;
504
505 /*
506 * The MAC and BSSID addresses are simple array of bytes,
507 * these arrays are little endian, so when sending the addresses
508 * to the drivers, copy the it into a endian-signed variable.
509 *
510 * Note that all devices (except rt2500usb) have 32 bits
511 * register word sizes. This means that whatever variable we
512 * pass _must_ be a multiple of 32 bits. Otherwise the device
513 * might not accept what we are sending to it.
514 * This will also make it easier for the driver to write
515 * the data to the device.
516 */
517 __le32 mac[2];
518 __le32 bssid[2];
519 };
520
521 /*
522 * Private structure for storing STA details
523 * wcid: Wireless Client ID
524 */
525 struct rt2x00_sta {
526 int wcid;
527 };
528
sta_to_rt2x00_sta(struct ieee80211_sta * sta)529 static inline struct rt2x00_sta* sta_to_rt2x00_sta(struct ieee80211_sta *sta)
530 {
531 return (struct rt2x00_sta *)sta->drv_priv;
532 }
533
534 /*
535 * rt2x00lib callback functions.
536 */
537 struct rt2x00lib_ops {
538 /*
539 * Interrupt handlers.
540 */
541 irq_handler_t irq_handler;
542
543 /*
544 * TX status tasklet handler.
545 */
546 void (*txstatus_tasklet) (unsigned long data);
547 void (*pretbtt_tasklet) (unsigned long data);
548 void (*tbtt_tasklet) (unsigned long data);
549 void (*rxdone_tasklet) (unsigned long data);
550 void (*autowake_tasklet) (unsigned long data);
551
552 /*
553 * Device init handlers.
554 */
555 int (*probe_hw) (struct rt2x00_dev *rt2x00dev);
556 char *(*get_firmware_name) (struct rt2x00_dev *rt2x00dev);
557 int (*check_firmware) (struct rt2x00_dev *rt2x00dev,
558 const u8 *data, const size_t len);
559 int (*load_firmware) (struct rt2x00_dev *rt2x00dev,
560 const u8 *data, const size_t len);
561
562 /*
563 * Device initialization/deinitialization handlers.
564 */
565 int (*initialize) (struct rt2x00_dev *rt2x00dev);
566 void (*uninitialize) (struct rt2x00_dev *rt2x00dev);
567
568 /*
569 * queue initialization handlers
570 */
571 bool (*get_entry_state) (struct queue_entry *entry);
572 void (*clear_entry) (struct queue_entry *entry);
573
574 /*
575 * Radio control handlers.
576 */
577 int (*set_device_state) (struct rt2x00_dev *rt2x00dev,
578 enum dev_state state);
579 int (*rfkill_poll) (struct rt2x00_dev *rt2x00dev);
580 void (*link_stats) (struct rt2x00_dev *rt2x00dev,
581 struct link_qual *qual);
582 void (*reset_tuner) (struct rt2x00_dev *rt2x00dev,
583 struct link_qual *qual);
584 void (*link_tuner) (struct rt2x00_dev *rt2x00dev,
585 struct link_qual *qual, const u32 count);
586 void (*gain_calibration) (struct rt2x00_dev *rt2x00dev);
587 void (*vco_calibration) (struct rt2x00_dev *rt2x00dev);
588
589 /*
590 * Data queue handlers.
591 */
592 void (*watchdog) (struct rt2x00_dev *rt2x00dev);
593 void (*start_queue) (struct data_queue *queue);
594 void (*kick_queue) (struct data_queue *queue);
595 void (*stop_queue) (struct data_queue *queue);
596 void (*flush_queue) (struct data_queue *queue, bool drop);
597 void (*tx_dma_done) (struct queue_entry *entry);
598
599 /*
600 * TX control handlers
601 */
602 void (*write_tx_desc) (struct queue_entry *entry,
603 struct txentry_desc *txdesc);
604 void (*write_tx_data) (struct queue_entry *entry,
605 struct txentry_desc *txdesc);
606 void (*write_beacon) (struct queue_entry *entry,
607 struct txentry_desc *txdesc);
608 void (*clear_beacon) (struct queue_entry *entry);
609 int (*get_tx_data_len) (struct queue_entry *entry);
610
611 /*
612 * RX control handlers
613 */
614 void (*fill_rxdone) (struct queue_entry *entry,
615 struct rxdone_entry_desc *rxdesc);
616
617 /*
618 * Configuration handlers.
619 */
620 int (*config_shared_key) (struct rt2x00_dev *rt2x00dev,
621 struct rt2x00lib_crypto *crypto,
622 struct ieee80211_key_conf *key);
623 int (*config_pairwise_key) (struct rt2x00_dev *rt2x00dev,
624 struct rt2x00lib_crypto *crypto,
625 struct ieee80211_key_conf *key);
626 void (*config_filter) (struct rt2x00_dev *rt2x00dev,
627 const unsigned int filter_flags);
628 void (*config_intf) (struct rt2x00_dev *rt2x00dev,
629 struct rt2x00_intf *intf,
630 struct rt2x00intf_conf *conf,
631 const unsigned int flags);
632 #define CONFIG_UPDATE_TYPE ( 1 << 1 )
633 #define CONFIG_UPDATE_MAC ( 1 << 2 )
634 #define CONFIG_UPDATE_BSSID ( 1 << 3 )
635
636 void (*config_erp) (struct rt2x00_dev *rt2x00dev,
637 struct rt2x00lib_erp *erp,
638 u32 changed);
639 void (*config_ant) (struct rt2x00_dev *rt2x00dev,
640 struct antenna_setup *ant);
641 void (*config) (struct rt2x00_dev *rt2x00dev,
642 struct rt2x00lib_conf *libconf,
643 const unsigned int changed_flags);
644 int (*sta_add) (struct rt2x00_dev *rt2x00dev,
645 struct ieee80211_vif *vif,
646 struct ieee80211_sta *sta);
647 int (*sta_remove) (struct rt2x00_dev *rt2x00dev,
648 int wcid);
649 };
650
651 /*
652 * rt2x00 driver callback operation structure.
653 */
654 struct rt2x00_ops {
655 const char *name;
656 const unsigned int drv_data_size;
657 const unsigned int max_sta_intf;
658 const unsigned int max_ap_intf;
659 const unsigned int eeprom_size;
660 const unsigned int rf_size;
661 const unsigned int tx_queues;
662 const unsigned int extra_tx_headroom;
663 const struct data_queue_desc *rx;
664 const struct data_queue_desc *tx;
665 const struct data_queue_desc *bcn;
666 const struct data_queue_desc *atim;
667 const struct rt2x00lib_ops *lib;
668 const void *drv;
669 const struct ieee80211_ops *hw;
670 #ifdef CONFIG_RT2X00_LIB_DEBUGFS
671 const struct rt2x00debug *debugfs;
672 #endif /* CONFIG_RT2X00_LIB_DEBUGFS */
673 };
674
675 /*
676 * rt2x00 state flags
677 */
678 enum rt2x00_state_flags {
679 /*
680 * Device flags
681 */
682 DEVICE_STATE_PRESENT,
683 DEVICE_STATE_REGISTERED_HW,
684 DEVICE_STATE_INITIALIZED,
685 DEVICE_STATE_STARTED,
686 DEVICE_STATE_ENABLED_RADIO,
687 DEVICE_STATE_SCANNING,
688
689 /*
690 * Driver configuration
691 */
692 CONFIG_CHANNEL_HT40,
693 CONFIG_POWERSAVING,
694
695 /*
696 * Mark we currently are sequentially reading TX_STA_FIFO register
697 * FIXME: this is for only rt2800usb, should go to private data
698 */
699 TX_STATUS_READING,
700 };
701
702 /*
703 * rt2x00 capability flags
704 */
705 enum rt2x00_capability_flags {
706 /*
707 * Requirements
708 */
709 REQUIRE_FIRMWARE,
710 REQUIRE_BEACON_GUARD,
711 REQUIRE_ATIM_QUEUE,
712 REQUIRE_DMA,
713 REQUIRE_COPY_IV,
714 REQUIRE_L2PAD,
715 REQUIRE_TXSTATUS_FIFO,
716 REQUIRE_TASKLET_CONTEXT,
717 REQUIRE_SW_SEQNO,
718 REQUIRE_HT_TX_DESC,
719 REQUIRE_PS_AUTOWAKE,
720
721 /*
722 * Capabilities
723 */
724 CAPABILITY_HW_BUTTON,
725 CAPABILITY_HW_CRYPTO,
726 CAPABILITY_POWER_LIMIT,
727 CAPABILITY_CONTROL_FILTERS,
728 CAPABILITY_CONTROL_FILTER_PSPOLL,
729 CAPABILITY_PRE_TBTT_INTERRUPT,
730 CAPABILITY_LINK_TUNING,
731 CAPABILITY_FRAME_TYPE,
732 CAPABILITY_RF_SEQUENCE,
733 CAPABILITY_EXTERNAL_LNA_A,
734 CAPABILITY_EXTERNAL_LNA_BG,
735 CAPABILITY_DOUBLE_ANTENNA,
736 CAPABILITY_BT_COEXIST,
737 CAPABILITY_VCO_RECALIBRATION,
738 };
739
740 /*
741 * rt2x00 device structure.
742 */
743 struct rt2x00_dev {
744 /*
745 * Device structure.
746 * The structure stored in here depends on the
747 * system bus (PCI or USB).
748 * When accessing this variable, the rt2x00dev_{pci,usb}
749 * macros should be used for correct typecasting.
750 */
751 struct device *dev;
752
753 /*
754 * Callback functions.
755 */
756 const struct rt2x00_ops *ops;
757
758 /*
759 * Driver data.
760 */
761 void *drv_data;
762
763 /*
764 * IEEE80211 control structure.
765 */
766 struct ieee80211_hw *hw;
767 struct ieee80211_supported_band bands[IEEE80211_NUM_BANDS];
768 enum ieee80211_band curr_band;
769 int curr_freq;
770
771 /*
772 * If enabled, the debugfs interface structures
773 * required for deregistration of debugfs.
774 */
775 #ifdef CONFIG_RT2X00_LIB_DEBUGFS
776 struct rt2x00debug_intf *debugfs_intf;
777 #endif /* CONFIG_RT2X00_LIB_DEBUGFS */
778
779 /*
780 * LED structure for changing the LED status
781 * by mac8011 or the kernel.
782 */
783 #ifdef CONFIG_RT2X00_LIB_LEDS
784 struct rt2x00_led led_radio;
785 struct rt2x00_led led_assoc;
786 struct rt2x00_led led_qual;
787 u16 led_mcu_reg;
788 #endif /* CONFIG_RT2X00_LIB_LEDS */
789
790 /*
791 * Device state flags.
792 * In these flags the current status is stored.
793 * Access to these flags should occur atomically.
794 */
795 unsigned long flags;
796
797 /*
798 * Device capabiltiy flags.
799 * In these flags the device/driver capabilities are stored.
800 * Access to these flags should occur non-atomically.
801 */
802 unsigned long cap_flags;
803
804 /*
805 * Device information, Bus IRQ and name (PCI, SoC)
806 */
807 int irq;
808 const char *name;
809
810 /*
811 * Chipset identification.
812 */
813 struct rt2x00_chip chip;
814
815 /*
816 * hw capability specifications.
817 */
818 struct hw_mode_spec spec;
819
820 /*
821 * This is the default TX/RX antenna setup as indicated
822 * by the device's EEPROM.
823 */
824 struct antenna_setup default_ant;
825
826 /*
827 * Register pointers
828 * csr.base: CSR base register address. (PCI)
829 * csr.cache: CSR cache for usb_control_msg. (USB)
830 */
831 union csr {
832 void __iomem *base;
833 void *cache;
834 } csr;
835
836 /*
837 * Mutex to protect register accesses.
838 * For PCI and USB devices it protects against concurrent indirect
839 * register access (BBP, RF, MCU) since accessing those
840 * registers require multiple calls to the CSR registers.
841 * For USB devices it also protects the csr_cache since that
842 * field is used for normal CSR access and it cannot support
843 * multiple callers simultaneously.
844 */
845 struct mutex csr_mutex;
846
847 /*
848 * Current packet filter configuration for the device.
849 * This contains all currently active FIF_* flags send
850 * to us by mac80211 during configure_filter().
851 */
852 unsigned int packet_filter;
853
854 /*
855 * Interface details:
856 * - Open ap interface count.
857 * - Open sta interface count.
858 * - Association count.
859 * - Beaconing enabled count.
860 */
861 unsigned int intf_ap_count;
862 unsigned int intf_sta_count;
863 unsigned int intf_associated;
864 unsigned int intf_beaconing;
865
866 /*
867 * Link quality
868 */
869 struct link link;
870
871 /*
872 * EEPROM data.
873 */
874 __le16 *eeprom;
875
876 /*
877 * Active RF register values.
878 * These are stored here so we don't need
879 * to read the rf registers and can directly
880 * use this value instead.
881 * This field should be accessed by using
882 * rt2x00_rf_read() and rt2x00_rf_write().
883 */
884 u32 *rf;
885
886 /*
887 * LNA gain
888 */
889 short lna_gain;
890
891 /*
892 * Current TX power value.
893 */
894 u16 tx_power;
895
896 /*
897 * Current retry values.
898 */
899 u8 short_retry;
900 u8 long_retry;
901
902 /*
903 * Rssi <-> Dbm offset
904 */
905 u8 rssi_offset;
906
907 /*
908 * Frequency offset.
909 */
910 u8 freq_offset;
911
912 /*
913 * Association id.
914 */
915 u16 aid;
916
917 /*
918 * Beacon interval.
919 */
920 u16 beacon_int;
921
922 /**
923 * Timestamp of last received beacon
924 */
925 unsigned long last_beacon;
926
927 /*
928 * Low level statistics which will have
929 * to be kept up to date while device is running.
930 */
931 struct ieee80211_low_level_stats low_level_stats;
932
933 /**
934 * Work queue for all work which should not be placed
935 * on the mac80211 workqueue (because of dependencies
936 * between various work structures).
937 */
938 struct workqueue_struct *workqueue;
939
940 /*
941 * Scheduled work.
942 * NOTE: intf_work will use ieee80211_iterate_active_interfaces()
943 * which means it cannot be placed on the hw->workqueue
944 * due to RTNL locking requirements.
945 */
946 struct work_struct intf_work;
947
948 /**
949 * Scheduled work for TX/RX done handling (USB devices)
950 */
951 struct work_struct rxdone_work;
952 struct work_struct txdone_work;
953
954 /*
955 * Powersaving work
956 */
957 struct delayed_work autowakeup_work;
958 struct work_struct sleep_work;
959
960 /*
961 * Data queue arrays for RX, TX, Beacon and ATIM.
962 */
963 unsigned int data_queues;
964 struct data_queue *rx;
965 struct data_queue *tx;
966 struct data_queue *bcn;
967 struct data_queue *atim;
968
969 /*
970 * Firmware image.
971 */
972 const struct firmware *fw;
973
974 /*
975 * FIFO for storing tx status reports between isr and tasklet.
976 */
977 DECLARE_KFIFO_PTR(txstatus_fifo, u32);
978
979 /*
980 * Timer to ensure tx status reports are read (rt2800usb).
981 */
982 struct hrtimer txstatus_timer;
983
984 /*
985 * Tasklet for processing tx status reports (rt2800pci).
986 */
987 struct tasklet_struct txstatus_tasklet;
988 struct tasklet_struct pretbtt_tasklet;
989 struct tasklet_struct tbtt_tasklet;
990 struct tasklet_struct rxdone_tasklet;
991 struct tasklet_struct autowake_tasklet;
992
993 /*
994 * Used for VCO periodic calibration.
995 */
996 int rf_channel;
997
998 /*
999 * Protect the interrupt mask register.
1000 */
1001 spinlock_t irqmask_lock;
1002 };
1003
1004 /*
1005 * Register defines.
1006 * Some registers require multiple attempts before success,
1007 * in those cases REGISTER_BUSY_COUNT attempts should be
1008 * taken with a REGISTER_BUSY_DELAY interval.
1009 */
1010 #define REGISTER_BUSY_COUNT 100
1011 #define REGISTER_BUSY_DELAY 100
1012
1013 /*
1014 * Generic RF access.
1015 * The RF is being accessed by word index.
1016 */
rt2x00_rf_read(struct rt2x00_dev * rt2x00dev,const unsigned int word,u32 * data)1017 static inline void rt2x00_rf_read(struct rt2x00_dev *rt2x00dev,
1018 const unsigned int word, u32 *data)
1019 {
1020 BUG_ON(word < 1 || word > rt2x00dev->ops->rf_size / sizeof(u32));
1021 *data = rt2x00dev->rf[word - 1];
1022 }
1023
rt2x00_rf_write(struct rt2x00_dev * rt2x00dev,const unsigned int word,u32 data)1024 static inline void rt2x00_rf_write(struct rt2x00_dev *rt2x00dev,
1025 const unsigned int word, u32 data)
1026 {
1027 BUG_ON(word < 1 || word > rt2x00dev->ops->rf_size / sizeof(u32));
1028 rt2x00dev->rf[word - 1] = data;
1029 }
1030
1031 /*
1032 * Generic EEPROM access.
1033 * The EEPROM is being accessed by word index.
1034 */
rt2x00_eeprom_addr(struct rt2x00_dev * rt2x00dev,const unsigned int word)1035 static inline void *rt2x00_eeprom_addr(struct rt2x00_dev *rt2x00dev,
1036 const unsigned int word)
1037 {
1038 return (void *)&rt2x00dev->eeprom[word];
1039 }
1040
rt2x00_eeprom_read(struct rt2x00_dev * rt2x00dev,const unsigned int word,u16 * data)1041 static inline void rt2x00_eeprom_read(struct rt2x00_dev *rt2x00dev,
1042 const unsigned int word, u16 *data)
1043 {
1044 *data = le16_to_cpu(rt2x00dev->eeprom[word]);
1045 }
1046
rt2x00_eeprom_write(struct rt2x00_dev * rt2x00dev,const unsigned int word,u16 data)1047 static inline void rt2x00_eeprom_write(struct rt2x00_dev *rt2x00dev,
1048 const unsigned int word, u16 data)
1049 {
1050 rt2x00dev->eeprom[word] = cpu_to_le16(data);
1051 }
1052
1053 /*
1054 * Chipset handlers
1055 */
rt2x00_set_chip(struct rt2x00_dev * rt2x00dev,const u16 rt,const u16 rf,const u16 rev)1056 static inline void rt2x00_set_chip(struct rt2x00_dev *rt2x00dev,
1057 const u16 rt, const u16 rf, const u16 rev)
1058 {
1059 rt2x00dev->chip.rt = rt;
1060 rt2x00dev->chip.rf = rf;
1061 rt2x00dev->chip.rev = rev;
1062
1063 INFO(rt2x00dev,
1064 "Chipset detected - rt: %04x, rf: %04x, rev: %04x.\n",
1065 rt2x00dev->chip.rt, rt2x00dev->chip.rf, rt2x00dev->chip.rev);
1066 }
1067
rt2x00_rt(struct rt2x00_dev * rt2x00dev,const u16 rt)1068 static inline bool rt2x00_rt(struct rt2x00_dev *rt2x00dev, const u16 rt)
1069 {
1070 return (rt2x00dev->chip.rt == rt);
1071 }
1072
rt2x00_rf(struct rt2x00_dev * rt2x00dev,const u16 rf)1073 static inline bool rt2x00_rf(struct rt2x00_dev *rt2x00dev, const u16 rf)
1074 {
1075 return (rt2x00dev->chip.rf == rf);
1076 }
1077
rt2x00_rev(struct rt2x00_dev * rt2x00dev)1078 static inline u16 rt2x00_rev(struct rt2x00_dev *rt2x00dev)
1079 {
1080 return rt2x00dev->chip.rev;
1081 }
1082
rt2x00_rt_rev(struct rt2x00_dev * rt2x00dev,const u16 rt,const u16 rev)1083 static inline bool rt2x00_rt_rev(struct rt2x00_dev *rt2x00dev,
1084 const u16 rt, const u16 rev)
1085 {
1086 return (rt2x00_rt(rt2x00dev, rt) && rt2x00_rev(rt2x00dev) == rev);
1087 }
1088
rt2x00_rt_rev_lt(struct rt2x00_dev * rt2x00dev,const u16 rt,const u16 rev)1089 static inline bool rt2x00_rt_rev_lt(struct rt2x00_dev *rt2x00dev,
1090 const u16 rt, const u16 rev)
1091 {
1092 return (rt2x00_rt(rt2x00dev, rt) && rt2x00_rev(rt2x00dev) < rev);
1093 }
1094
rt2x00_rt_rev_gte(struct rt2x00_dev * rt2x00dev,const u16 rt,const u16 rev)1095 static inline bool rt2x00_rt_rev_gte(struct rt2x00_dev *rt2x00dev,
1096 const u16 rt, const u16 rev)
1097 {
1098 return (rt2x00_rt(rt2x00dev, rt) && rt2x00_rev(rt2x00dev) >= rev);
1099 }
1100
rt2x00_set_chip_intf(struct rt2x00_dev * rt2x00dev,enum rt2x00_chip_intf intf)1101 static inline void rt2x00_set_chip_intf(struct rt2x00_dev *rt2x00dev,
1102 enum rt2x00_chip_intf intf)
1103 {
1104 rt2x00dev->chip.intf = intf;
1105 }
1106
rt2x00_intf(struct rt2x00_dev * rt2x00dev,enum rt2x00_chip_intf intf)1107 static inline bool rt2x00_intf(struct rt2x00_dev *rt2x00dev,
1108 enum rt2x00_chip_intf intf)
1109 {
1110 return (rt2x00dev->chip.intf == intf);
1111 }
1112
rt2x00_is_pci(struct rt2x00_dev * rt2x00dev)1113 static inline bool rt2x00_is_pci(struct rt2x00_dev *rt2x00dev)
1114 {
1115 return rt2x00_intf(rt2x00dev, RT2X00_CHIP_INTF_PCI) ||
1116 rt2x00_intf(rt2x00dev, RT2X00_CHIP_INTF_PCIE);
1117 }
1118
rt2x00_is_pcie(struct rt2x00_dev * rt2x00dev)1119 static inline bool rt2x00_is_pcie(struct rt2x00_dev *rt2x00dev)
1120 {
1121 return rt2x00_intf(rt2x00dev, RT2X00_CHIP_INTF_PCIE);
1122 }
1123
rt2x00_is_usb(struct rt2x00_dev * rt2x00dev)1124 static inline bool rt2x00_is_usb(struct rt2x00_dev *rt2x00dev)
1125 {
1126 return rt2x00_intf(rt2x00dev, RT2X00_CHIP_INTF_USB);
1127 }
1128
rt2x00_is_soc(struct rt2x00_dev * rt2x00dev)1129 static inline bool rt2x00_is_soc(struct rt2x00_dev *rt2x00dev)
1130 {
1131 return rt2x00_intf(rt2x00dev, RT2X00_CHIP_INTF_SOC);
1132 }
1133
1134 /**
1135 * rt2x00queue_map_txskb - Map a skb into DMA for TX purposes.
1136 * @entry: Pointer to &struct queue_entry
1137 */
1138 void rt2x00queue_map_txskb(struct queue_entry *entry);
1139
1140 /**
1141 * rt2x00queue_unmap_skb - Unmap a skb from DMA.
1142 * @entry: Pointer to &struct queue_entry
1143 */
1144 void rt2x00queue_unmap_skb(struct queue_entry *entry);
1145
1146 /**
1147 * rt2x00queue_get_tx_queue - Convert tx queue index to queue pointer
1148 * @rt2x00dev: Pointer to &struct rt2x00_dev.
1149 * @queue: rt2x00 queue index (see &enum data_queue_qid).
1150 *
1151 * Returns NULL for non tx queues.
1152 */
1153 static inline struct data_queue *
rt2x00queue_get_tx_queue(struct rt2x00_dev * rt2x00dev,const enum data_queue_qid queue)1154 rt2x00queue_get_tx_queue(struct rt2x00_dev *rt2x00dev,
1155 const enum data_queue_qid queue)
1156 {
1157 if (queue < rt2x00dev->ops->tx_queues && rt2x00dev->tx)
1158 return &rt2x00dev->tx[queue];
1159
1160 if (queue == QID_ATIM)
1161 return rt2x00dev->atim;
1162
1163 return NULL;
1164 }
1165
1166 /**
1167 * rt2x00queue_get_entry - Get queue entry where the given index points to.
1168 * @queue: Pointer to &struct data_queue from where we obtain the entry.
1169 * @index: Index identifier for obtaining the correct index.
1170 */
1171 struct queue_entry *rt2x00queue_get_entry(struct data_queue *queue,
1172 enum queue_index index);
1173
1174 /**
1175 * rt2x00queue_pause_queue - Pause a data queue
1176 * @queue: Pointer to &struct data_queue.
1177 *
1178 * This function will pause the data queue locally, preventing
1179 * new frames to be added to the queue (while the hardware is
1180 * still allowed to run).
1181 */
1182 void rt2x00queue_pause_queue(struct data_queue *queue);
1183
1184 /**
1185 * rt2x00queue_unpause_queue - unpause a data queue
1186 * @queue: Pointer to &struct data_queue.
1187 *
1188 * This function will unpause the data queue locally, allowing
1189 * new frames to be added to the queue again.
1190 */
1191 void rt2x00queue_unpause_queue(struct data_queue *queue);
1192
1193 /**
1194 * rt2x00queue_start_queue - Start a data queue
1195 * @queue: Pointer to &struct data_queue.
1196 *
1197 * This function will start handling all pending frames in the queue.
1198 */
1199 void rt2x00queue_start_queue(struct data_queue *queue);
1200
1201 /**
1202 * rt2x00queue_stop_queue - Halt a data queue
1203 * @queue: Pointer to &struct data_queue.
1204 *
1205 * This function will stop all pending frames in the queue.
1206 */
1207 void rt2x00queue_stop_queue(struct data_queue *queue);
1208
1209 /**
1210 * rt2x00queue_flush_queue - Flush a data queue
1211 * @queue: Pointer to &struct data_queue.
1212 * @drop: True to drop all pending frames.
1213 *
1214 * This function will flush the queue. After this call
1215 * the queue is guaranteed to be empty.
1216 */
1217 void rt2x00queue_flush_queue(struct data_queue *queue, bool drop);
1218
1219 /**
1220 * rt2x00queue_start_queues - Start all data queues
1221 * @rt2x00dev: Pointer to &struct rt2x00_dev.
1222 *
1223 * This function will loop through all available queues to start them
1224 */
1225 void rt2x00queue_start_queues(struct rt2x00_dev *rt2x00dev);
1226
1227 /**
1228 * rt2x00queue_stop_queues - Halt all data queues
1229 * @rt2x00dev: Pointer to &struct rt2x00_dev.
1230 *
1231 * This function will loop through all available queues to stop
1232 * any pending frames.
1233 */
1234 void rt2x00queue_stop_queues(struct rt2x00_dev *rt2x00dev);
1235
1236 /**
1237 * rt2x00queue_flush_queues - Flush all data queues
1238 * @rt2x00dev: Pointer to &struct rt2x00_dev.
1239 * @drop: True to drop all pending frames.
1240 *
1241 * This function will loop through all available queues to flush
1242 * any pending frames.
1243 */
1244 void rt2x00queue_flush_queues(struct rt2x00_dev *rt2x00dev, bool drop);
1245
1246 /*
1247 * Debugfs handlers.
1248 */
1249 /**
1250 * rt2x00debug_dump_frame - Dump a frame to userspace through debugfs.
1251 * @rt2x00dev: Pointer to &struct rt2x00_dev.
1252 * @type: The type of frame that is being dumped.
1253 * @skb: The skb containing the frame to be dumped.
1254 */
1255 #ifdef CONFIG_RT2X00_LIB_DEBUGFS
1256 void rt2x00debug_dump_frame(struct rt2x00_dev *rt2x00dev,
1257 enum rt2x00_dump_type type, struct sk_buff *skb);
1258 #else
rt2x00debug_dump_frame(struct rt2x00_dev * rt2x00dev,enum rt2x00_dump_type type,struct sk_buff * skb)1259 static inline void rt2x00debug_dump_frame(struct rt2x00_dev *rt2x00dev,
1260 enum rt2x00_dump_type type,
1261 struct sk_buff *skb)
1262 {
1263 }
1264 #endif /* CONFIG_RT2X00_LIB_DEBUGFS */
1265
1266 /*
1267 * Utility functions.
1268 */
1269 u32 rt2x00lib_get_bssidx(struct rt2x00_dev *rt2x00dev,
1270 struct ieee80211_vif *vif);
1271
1272 /*
1273 * Interrupt context handlers.
1274 */
1275 void rt2x00lib_beacondone(struct rt2x00_dev *rt2x00dev);
1276 void rt2x00lib_pretbtt(struct rt2x00_dev *rt2x00dev);
1277 void rt2x00lib_dmastart(struct queue_entry *entry);
1278 void rt2x00lib_dmadone(struct queue_entry *entry);
1279 void rt2x00lib_txdone(struct queue_entry *entry,
1280 struct txdone_entry_desc *txdesc);
1281 void rt2x00lib_txdone_noinfo(struct queue_entry *entry, u32 status);
1282 void rt2x00lib_rxdone(struct queue_entry *entry);
1283
1284 /*
1285 * mac80211 handlers.
1286 */
1287 void rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb);
1288 int rt2x00mac_start(struct ieee80211_hw *hw);
1289 void rt2x00mac_stop(struct ieee80211_hw *hw);
1290 int rt2x00mac_add_interface(struct ieee80211_hw *hw,
1291 struct ieee80211_vif *vif);
1292 void rt2x00mac_remove_interface(struct ieee80211_hw *hw,
1293 struct ieee80211_vif *vif);
1294 int rt2x00mac_config(struct ieee80211_hw *hw, u32 changed);
1295 void rt2x00mac_configure_filter(struct ieee80211_hw *hw,
1296 unsigned int changed_flags,
1297 unsigned int *total_flags,
1298 u64 multicast);
1299 int rt2x00mac_set_tim(struct ieee80211_hw *hw, struct ieee80211_sta *sta,
1300 bool set);
1301 #ifdef CONFIG_RT2X00_LIB_CRYPTO
1302 int rt2x00mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
1303 struct ieee80211_vif *vif, struct ieee80211_sta *sta,
1304 struct ieee80211_key_conf *key);
1305 #else
1306 #define rt2x00mac_set_key NULL
1307 #endif /* CONFIG_RT2X00_LIB_CRYPTO */
1308 int rt2x00mac_sta_add(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
1309 struct ieee80211_sta *sta);
1310 int rt2x00mac_sta_remove(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
1311 struct ieee80211_sta *sta);
1312 void rt2x00mac_sw_scan_start(struct ieee80211_hw *hw);
1313 void rt2x00mac_sw_scan_complete(struct ieee80211_hw *hw);
1314 int rt2x00mac_get_stats(struct ieee80211_hw *hw,
1315 struct ieee80211_low_level_stats *stats);
1316 void rt2x00mac_bss_info_changed(struct ieee80211_hw *hw,
1317 struct ieee80211_vif *vif,
1318 struct ieee80211_bss_conf *bss_conf,
1319 u32 changes);
1320 int rt2x00mac_conf_tx(struct ieee80211_hw *hw,
1321 struct ieee80211_vif *vif, u16 queue,
1322 const struct ieee80211_tx_queue_params *params);
1323 void rt2x00mac_rfkill_poll(struct ieee80211_hw *hw);
1324 void rt2x00mac_flush(struct ieee80211_hw *hw, bool drop);
1325 int rt2x00mac_set_antenna(struct ieee80211_hw *hw, u32 tx_ant, u32 rx_ant);
1326 int rt2x00mac_get_antenna(struct ieee80211_hw *hw, u32 *tx_ant, u32 *rx_ant);
1327 void rt2x00mac_get_ringparam(struct ieee80211_hw *hw,
1328 u32 *tx, u32 *tx_max, u32 *rx, u32 *rx_max);
1329 bool rt2x00mac_tx_frames_pending(struct ieee80211_hw *hw);
1330
1331 /*
1332 * Driver allocation handlers.
1333 */
1334 int rt2x00lib_probe_dev(struct rt2x00_dev *rt2x00dev);
1335 void rt2x00lib_remove_dev(struct rt2x00_dev *rt2x00dev);
1336 #ifdef CONFIG_PM
1337 int rt2x00lib_suspend(struct rt2x00_dev *rt2x00dev, pm_message_t state);
1338 int rt2x00lib_resume(struct rt2x00_dev *rt2x00dev);
1339 #endif /* CONFIG_PM */
1340
1341 #endif /* RT2X00_H */
1342