• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1 /*
2  * Copyright(c) 2007 Intel Corporation. All rights reserved.
3  * Copyright(c) 2008 Red Hat, Inc.  All rights reserved.
4  * Copyright(c) 2008 Mike Christie
5  *
6  * This program is free software; you can redistribute it and/or modify it
7  * under the terms and conditions of the GNU General Public License,
8  * version 2, as published by the Free Software Foundation.
9  *
10  * This program is distributed in the hope it will be useful, but WITHOUT
11  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
12  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
13  * more details.
14  *
15  * You should have received a copy of the GNU General Public License along with
16  * this program; if not, write to the Free Software Foundation, Inc.,
17  * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
18  *
19  * Maintained at www.Open-FCoE.org
20  */
21 
22 #include <linux/module.h>
23 #include <linux/delay.h>
24 #include <linux/kernel.h>
25 #include <linux/types.h>
26 #include <linux/spinlock.h>
27 #include <linux/scatterlist.h>
28 #include <linux/err.h>
29 #include <linux/crc32.h>
30 #include <linux/slab.h>
31 
32 #include <scsi/scsi_tcq.h>
33 #include <scsi/scsi.h>
34 #include <scsi/scsi_host.h>
35 #include <scsi/scsi_device.h>
36 #include <scsi/scsi_cmnd.h>
37 
38 #include <scsi/fc/fc_fc2.h>
39 
40 #include <scsi/libfc.h>
41 #include <scsi/fc_encode.h>
42 
43 #include "fc_libfc.h"
44 
45 static struct kmem_cache *scsi_pkt_cachep;
46 
47 /* SRB state definitions */
48 #define FC_SRB_FREE		0		/* cmd is free */
49 #define FC_SRB_CMD_SENT		(1 << 0)	/* cmd has been sent */
50 #define FC_SRB_RCV_STATUS	(1 << 1)	/* response has arrived */
51 #define FC_SRB_ABORT_PENDING	(1 << 2)	/* cmd abort sent to device */
52 #define FC_SRB_ABORTED		(1 << 3)	/* abort acknowledged */
53 #define FC_SRB_DISCONTIG	(1 << 4)	/* non-sequential data recvd */
54 #define FC_SRB_COMPL		(1 << 5)	/* fc_io_compl has been run */
55 #define FC_SRB_FCP_PROCESSING_TMO (1 << 6)	/* timer function processing */
56 
57 #define FC_SRB_READ		(1 << 1)
58 #define FC_SRB_WRITE		(1 << 0)
59 
60 /*
61  * The SCp.ptr should be tested and set under the scsi_pkt_queue lock
62  */
63 #define CMD_SP(Cmnd)		    ((struct fc_fcp_pkt *)(Cmnd)->SCp.ptr)
64 #define CMD_ENTRY_STATUS(Cmnd)	    ((Cmnd)->SCp.have_data_in)
65 #define CMD_COMPL_STATUS(Cmnd)	    ((Cmnd)->SCp.this_residual)
66 #define CMD_SCSI_STATUS(Cmnd)	    ((Cmnd)->SCp.Status)
67 #define CMD_RESID_LEN(Cmnd)	    ((Cmnd)->SCp.buffers_residual)
68 
69 /**
70  * struct fc_fcp_internal - FCP layer internal data
71  * @scsi_pkt_pool: Memory pool to draw FCP packets from
72  * @scsi_queue_lock: Protects the scsi_pkt_queue
73  * @scsi_pkt_queue: Current FCP packets
74  * @last_can_queue_ramp_down_time: ramp down time
75  * @last_can_queue_ramp_up_time: ramp up time
76  * @max_can_queue: max can_queue size
77  */
78 struct fc_fcp_internal {
79 	mempool_t		*scsi_pkt_pool;
80 	spinlock_t		scsi_queue_lock;
81 	struct list_head	scsi_pkt_queue;
82 	unsigned long		last_can_queue_ramp_down_time;
83 	unsigned long		last_can_queue_ramp_up_time;
84 	int			max_can_queue;
85 };
86 
87 #define fc_get_scsi_internal(x)	((struct fc_fcp_internal *)(x)->scsi_priv)
88 
89 /*
90  * function prototypes
91  * FC scsi I/O related functions
92  */
93 static void fc_fcp_recv_data(struct fc_fcp_pkt *, struct fc_frame *);
94 static void fc_fcp_recv(struct fc_seq *, struct fc_frame *, void *);
95 static void fc_fcp_resp(struct fc_fcp_pkt *, struct fc_frame *);
96 static void fc_fcp_complete_locked(struct fc_fcp_pkt *);
97 static void fc_tm_done(struct fc_seq *, struct fc_frame *, void *);
98 static void fc_fcp_error(struct fc_fcp_pkt *, struct fc_frame *);
99 static void fc_fcp_recovery(struct fc_fcp_pkt *, u8 code);
100 static void fc_fcp_timeout(unsigned long);
101 static void fc_fcp_rec(struct fc_fcp_pkt *);
102 static void fc_fcp_rec_error(struct fc_fcp_pkt *, struct fc_frame *);
103 static void fc_fcp_rec_resp(struct fc_seq *, struct fc_frame *, void *);
104 static void fc_io_compl(struct fc_fcp_pkt *);
105 
106 static void fc_fcp_srr(struct fc_fcp_pkt *, enum fc_rctl, u32);
107 static void fc_fcp_srr_resp(struct fc_seq *, struct fc_frame *, void *);
108 static void fc_fcp_srr_error(struct fc_fcp_pkt *, struct fc_frame *);
109 
110 /*
111  * command status codes
112  */
113 #define FC_COMPLETE		0
114 #define FC_CMD_ABORTED		1
115 #define FC_CMD_RESET		2
116 #define FC_CMD_PLOGO		3
117 #define FC_SNS_RCV		4
118 #define FC_TRANS_ERR		5
119 #define FC_DATA_OVRRUN		6
120 #define FC_DATA_UNDRUN		7
121 #define FC_ERROR		8
122 #define FC_HRD_ERROR		9
123 #define FC_CRC_ERROR		10
124 #define FC_TIMED_OUT		11
125 
126 /*
127  * Error recovery timeout values.
128  */
129 #define FC_SCSI_TM_TOV		(10 * HZ)
130 #define FC_HOST_RESET_TIMEOUT	(30 * HZ)
131 #define FC_CAN_QUEUE_PERIOD	(60 * HZ)
132 
133 #define FC_MAX_ERROR_CNT	5
134 #define FC_MAX_RECOV_RETRY	3
135 
136 #define FC_FCP_DFLT_QUEUE_DEPTH 32
137 
138 /**
139  * fc_fcp_pkt_alloc() - Allocate a fcp_pkt
140  * @lport: The local port that the FCP packet is for
141  * @gfp:   GFP flags for allocation
142  *
143  * Return value: fcp_pkt structure or null on allocation failure.
144  * Context:	 Can be called from process context, no lock is required.
145  */
fc_fcp_pkt_alloc(struct fc_lport * lport,gfp_t gfp)146 static struct fc_fcp_pkt *fc_fcp_pkt_alloc(struct fc_lport *lport, gfp_t gfp)
147 {
148 	struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
149 	struct fc_fcp_pkt *fsp;
150 
151 	fsp = mempool_alloc(si->scsi_pkt_pool, gfp);
152 	if (fsp) {
153 		memset(fsp, 0, sizeof(*fsp));
154 		fsp->lp = lport;
155 		fsp->xfer_ddp = FC_XID_UNKNOWN;
156 		atomic_set(&fsp->ref_cnt, 1);
157 		init_timer(&fsp->timer);
158 		fsp->timer.data = (unsigned long)fsp;
159 		INIT_LIST_HEAD(&fsp->list);
160 		spin_lock_init(&fsp->scsi_pkt_lock);
161 	}
162 	return fsp;
163 }
164 
165 /**
166  * fc_fcp_pkt_release() - Release hold on a fcp_pkt
167  * @fsp: The FCP packet to be released
168  *
169  * Context: Can be called from process or interrupt context,
170  *	    no lock is required.
171  */
fc_fcp_pkt_release(struct fc_fcp_pkt * fsp)172 static void fc_fcp_pkt_release(struct fc_fcp_pkt *fsp)
173 {
174 	if (atomic_dec_and_test(&fsp->ref_cnt)) {
175 		struct fc_fcp_internal *si = fc_get_scsi_internal(fsp->lp);
176 
177 		mempool_free(fsp, si->scsi_pkt_pool);
178 	}
179 }
180 
181 /**
182  * fc_fcp_pkt_hold() - Hold a fcp_pkt
183  * @fsp: The FCP packet to be held
184  */
fc_fcp_pkt_hold(struct fc_fcp_pkt * fsp)185 static void fc_fcp_pkt_hold(struct fc_fcp_pkt *fsp)
186 {
187 	atomic_inc(&fsp->ref_cnt);
188 }
189 
190 /**
191  * fc_fcp_pkt_destory() - Release hold on a fcp_pkt
192  * @seq: The sequence that the FCP packet is on (required by destructor API)
193  * @fsp: The FCP packet to be released
194  *
195  * This routine is called by a destructor callback in the exch_seq_send()
196  * routine of the libfc Transport Template. The 'struct fc_seq' is a required
197  * argument even though it is not used by this routine.
198  *
199  * Context: No locking required.
200  */
fc_fcp_pkt_destroy(struct fc_seq * seq,void * fsp)201 static void fc_fcp_pkt_destroy(struct fc_seq *seq, void *fsp)
202 {
203 	fc_fcp_pkt_release(fsp);
204 }
205 
206 /**
207  * fc_fcp_lock_pkt() - Lock a fcp_pkt and increase its reference count
208  * @fsp: The FCP packet to be locked and incremented
209  *
210  * We should only return error if we return a command to SCSI-ml before
211  * getting a response. This can happen in cases where we send a abort, but
212  * do not wait for the response and the abort and command can be passing
213  * each other on the wire/network-layer.
214  *
215  * Note: this function locks the packet and gets a reference to allow
216  * callers to call the completion function while the lock is held and
217  * not have to worry about the packets refcount.
218  *
219  * TODO: Maybe we should just have callers grab/release the lock and
220  * have a function that they call to verify the fsp and grab a ref if
221  * needed.
222  */
fc_fcp_lock_pkt(struct fc_fcp_pkt * fsp)223 static inline int fc_fcp_lock_pkt(struct fc_fcp_pkt *fsp)
224 {
225 	spin_lock_bh(&fsp->scsi_pkt_lock);
226 	if (fsp->state & FC_SRB_COMPL) {
227 		spin_unlock_bh(&fsp->scsi_pkt_lock);
228 		return -EPERM;
229 	}
230 
231 	fc_fcp_pkt_hold(fsp);
232 	return 0;
233 }
234 
235 /**
236  * fc_fcp_unlock_pkt() - Release a fcp_pkt's lock and decrement its
237  *			 reference count
238  * @fsp: The FCP packet to be unlocked and decremented
239  */
fc_fcp_unlock_pkt(struct fc_fcp_pkt * fsp)240 static inline void fc_fcp_unlock_pkt(struct fc_fcp_pkt *fsp)
241 {
242 	spin_unlock_bh(&fsp->scsi_pkt_lock);
243 	fc_fcp_pkt_release(fsp);
244 }
245 
246 /**
247  * fc_fcp_timer_set() - Start a timer for a fcp_pkt
248  * @fsp:   The FCP packet to start a timer for
249  * @delay: The timeout period in jiffies
250  */
fc_fcp_timer_set(struct fc_fcp_pkt * fsp,unsigned long delay)251 static void fc_fcp_timer_set(struct fc_fcp_pkt *fsp, unsigned long delay)
252 {
253 	if (!(fsp->state & FC_SRB_COMPL))
254 		mod_timer(&fsp->timer, jiffies + delay);
255 }
256 
257 /**
258  * fc_fcp_send_abort() - Send an abort for exchanges associated with a
259  *			 fcp_pkt
260  * @fsp: The FCP packet to abort exchanges on
261  */
fc_fcp_send_abort(struct fc_fcp_pkt * fsp)262 static int fc_fcp_send_abort(struct fc_fcp_pkt *fsp)
263 {
264 	if (!fsp->seq_ptr)
265 		return -EINVAL;
266 
267 	fsp->state |= FC_SRB_ABORT_PENDING;
268 	return fsp->lp->tt.seq_exch_abort(fsp->seq_ptr, 0);
269 }
270 
271 /**
272  * fc_fcp_retry_cmd() - Retry a fcp_pkt
273  * @fsp: The FCP packet to be retried
274  *
275  * Sets the status code to be FC_ERROR and then calls
276  * fc_fcp_complete_locked() which in turn calls fc_io_compl().
277  * fc_io_compl() will notify the SCSI-ml that the I/O is done.
278  * The SCSI-ml will retry the command.
279  */
fc_fcp_retry_cmd(struct fc_fcp_pkt * fsp)280 static void fc_fcp_retry_cmd(struct fc_fcp_pkt *fsp)
281 {
282 	if (fsp->seq_ptr) {
283 		fsp->lp->tt.exch_done(fsp->seq_ptr);
284 		fsp->seq_ptr = NULL;
285 	}
286 
287 	fsp->state &= ~FC_SRB_ABORT_PENDING;
288 	fsp->io_status = 0;
289 	fsp->status_code = FC_ERROR;
290 	fc_fcp_complete_locked(fsp);
291 }
292 
293 /**
294  * fc_fcp_ddp_setup() - Calls a LLD's ddp_setup routine to set up DDP context
295  * @fsp: The FCP packet that will manage the DDP frames
296  * @xid: The XID that will be used for the DDP exchange
297  */
fc_fcp_ddp_setup(struct fc_fcp_pkt * fsp,u16 xid)298 void fc_fcp_ddp_setup(struct fc_fcp_pkt *fsp, u16 xid)
299 {
300 	struct fc_lport *lport;
301 
302 	lport = fsp->lp;
303 	if ((fsp->req_flags & FC_SRB_READ) &&
304 	    (lport->lro_enabled) && (lport->tt.ddp_setup)) {
305 		if (lport->tt.ddp_setup(lport, xid, scsi_sglist(fsp->cmd),
306 					scsi_sg_count(fsp->cmd)))
307 			fsp->xfer_ddp = xid;
308 	}
309 }
310 
311 /**
312  * fc_fcp_ddp_done() - Calls a LLD's ddp_done routine to release any
313  *		       DDP related resources for a fcp_pkt
314  * @fsp: The FCP packet that DDP had been used on
315  */
fc_fcp_ddp_done(struct fc_fcp_pkt * fsp)316 void fc_fcp_ddp_done(struct fc_fcp_pkt *fsp)
317 {
318 	struct fc_lport *lport;
319 
320 	if (!fsp)
321 		return;
322 
323 	if (fsp->xfer_ddp == FC_XID_UNKNOWN)
324 		return;
325 
326 	lport = fsp->lp;
327 	if (lport->tt.ddp_done) {
328 		fsp->xfer_len = lport->tt.ddp_done(lport, fsp->xfer_ddp);
329 		fsp->xfer_ddp = FC_XID_UNKNOWN;
330 	}
331 }
332 
333 /**
334  * fc_fcp_can_queue_ramp_up() - increases can_queue
335  * @lport: lport to ramp up can_queue
336  */
fc_fcp_can_queue_ramp_up(struct fc_lport * lport)337 static void fc_fcp_can_queue_ramp_up(struct fc_lport *lport)
338 {
339 	struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
340 	unsigned long flags;
341 	int can_queue;
342 
343 	spin_lock_irqsave(lport->host->host_lock, flags);
344 
345 	if (si->last_can_queue_ramp_up_time &&
346 	    (time_before(jiffies, si->last_can_queue_ramp_up_time +
347 			 FC_CAN_QUEUE_PERIOD)))
348 		goto unlock;
349 
350 	if (time_before(jiffies, si->last_can_queue_ramp_down_time +
351 			FC_CAN_QUEUE_PERIOD))
352 		goto unlock;
353 
354 	si->last_can_queue_ramp_up_time = jiffies;
355 
356 	can_queue = lport->host->can_queue << 1;
357 	if (can_queue >= si->max_can_queue) {
358 		can_queue = si->max_can_queue;
359 		si->last_can_queue_ramp_down_time = 0;
360 	}
361 	lport->host->can_queue = can_queue;
362 	shost_printk(KERN_ERR, lport->host, "libfc: increased "
363 		     "can_queue to %d.\n", can_queue);
364 
365 unlock:
366 	spin_unlock_irqrestore(lport->host->host_lock, flags);
367 }
368 
369 /**
370  * fc_fcp_can_queue_ramp_down() - reduces can_queue
371  * @lport: lport to reduce can_queue
372  *
373  * If we are getting memory allocation failures, then we may
374  * be trying to execute too many commands. We let the running
375  * commands complete or timeout, then try again with a reduced
376  * can_queue. Eventually we will hit the point where we run
377  * on all reserved structs.
378  */
fc_fcp_can_queue_ramp_down(struct fc_lport * lport)379 static void fc_fcp_can_queue_ramp_down(struct fc_lport *lport)
380 {
381 	struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
382 	unsigned long flags;
383 	int can_queue;
384 
385 	spin_lock_irqsave(lport->host->host_lock, flags);
386 
387 	if (si->last_can_queue_ramp_down_time &&
388 	    (time_before(jiffies, si->last_can_queue_ramp_down_time +
389 			 FC_CAN_QUEUE_PERIOD)))
390 		goto unlock;
391 
392 	si->last_can_queue_ramp_down_time = jiffies;
393 
394 	can_queue = lport->host->can_queue;
395 	can_queue >>= 1;
396 	if (!can_queue)
397 		can_queue = 1;
398 	lport->host->can_queue = can_queue;
399 	shost_printk(KERN_ERR, lport->host, "libfc: Could not allocate frame.\n"
400 		     "Reducing can_queue to %d.\n", can_queue);
401 
402 unlock:
403 	spin_unlock_irqrestore(lport->host->host_lock, flags);
404 }
405 
406 /*
407  * fc_fcp_frame_alloc() -  Allocates fc_frame structure and buffer.
408  * @lport:	fc lport struct
409  * @len:	payload length
410  *
411  * Allocates fc_frame structure and buffer but if fails to allocate
412  * then reduce can_queue.
413  */
fc_fcp_frame_alloc(struct fc_lport * lport,size_t len)414 static inline struct fc_frame *fc_fcp_frame_alloc(struct fc_lport *lport,
415 						  size_t len)
416 {
417 	struct fc_frame *fp;
418 
419 	fp = fc_frame_alloc(lport, len);
420 	if (likely(fp))
421 		return fp;
422 
423 	/* error case */
424 	fc_fcp_can_queue_ramp_down(lport);
425 	return NULL;
426 }
427 
428 /**
429  * fc_fcp_recv_data() - Handler for receiving SCSI-FCP data from a target
430  * @fsp: The FCP packet the data is on
431  * @fp:	 The data frame
432  */
fc_fcp_recv_data(struct fc_fcp_pkt * fsp,struct fc_frame * fp)433 static void fc_fcp_recv_data(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
434 {
435 	struct scsi_cmnd *sc = fsp->cmd;
436 	struct fc_lport *lport = fsp->lp;
437 	struct fcoe_dev_stats *stats;
438 	struct fc_frame_header *fh;
439 	size_t start_offset;
440 	size_t offset;
441 	u32 crc;
442 	u32 copy_len = 0;
443 	size_t len;
444 	void *buf;
445 	struct scatterlist *sg;
446 	u32 nents;
447 	u8 host_bcode = FC_COMPLETE;
448 
449 	fh = fc_frame_header_get(fp);
450 	offset = ntohl(fh->fh_parm_offset);
451 	start_offset = offset;
452 	len = fr_len(fp) - sizeof(*fh);
453 	buf = fc_frame_payload_get(fp, 0);
454 
455 	/*
456 	 * if this I/O is ddped then clear it and initiate recovery since data
457 	 * frames are expected to be placed directly in that case.
458 	 *
459 	 * Indicate error to scsi-ml because something went wrong with the
460 	 * ddp handling to get us here.
461 	 */
462 	if (fsp->xfer_ddp != FC_XID_UNKNOWN) {
463 		fc_fcp_ddp_done(fsp);
464 		FC_FCP_DBG(fsp, "DDP I/O in fc_fcp_recv_data set ERROR\n");
465 		host_bcode = FC_ERROR;
466 		goto err;
467 	}
468 	if (offset + len > fsp->data_len) {
469 		/* this should never happen */
470 		if ((fr_flags(fp) & FCPHF_CRC_UNCHECKED) &&
471 		    fc_frame_crc_check(fp))
472 			goto crc_err;
473 		FC_FCP_DBG(fsp, "data received past end. len %zx offset %zx "
474 			   "data_len %x\n", len, offset, fsp->data_len);
475 
476 		/* Data is corrupted indicate scsi-ml should retry */
477 		host_bcode = FC_DATA_OVRRUN;
478 		goto err;
479 	}
480 	if (offset != fsp->xfer_len)
481 		fsp->state |= FC_SRB_DISCONTIG;
482 
483 	sg = scsi_sglist(sc);
484 	nents = scsi_sg_count(sc);
485 
486 	if (!(fr_flags(fp) & FCPHF_CRC_UNCHECKED)) {
487 		copy_len = fc_copy_buffer_to_sglist(buf, len, sg, &nents,
488 						    &offset, NULL);
489 	} else {
490 		crc = crc32(~0, (u8 *) fh, sizeof(*fh));
491 		copy_len = fc_copy_buffer_to_sglist(buf, len, sg, &nents,
492 						    &offset, &crc);
493 		buf = fc_frame_payload_get(fp, 0);
494 		if (len % 4)
495 			crc = crc32(crc, buf + len, 4 - (len % 4));
496 
497 		if (~crc != le32_to_cpu(fr_crc(fp))) {
498 crc_err:
499 			stats = per_cpu_ptr(lport->dev_stats, get_cpu());
500 			stats->ErrorFrames++;
501 			/* per cpu count, not total count, but OK for limit */
502 			if (stats->InvalidCRCCount++ < FC_MAX_ERROR_CNT)
503 				printk(KERN_WARNING "libfc: CRC error on data "
504 				       "frame for port (%6.6x)\n",
505 				       lport->port_id);
506 			put_cpu();
507 			/*
508 			 * Assume the frame is total garbage.
509 			 * We may have copied it over the good part
510 			 * of the buffer.
511 			 * If so, we need to retry the entire operation.
512 			 * Otherwise, ignore it.
513 			 */
514 			if (fsp->state & FC_SRB_DISCONTIG) {
515 				host_bcode = FC_CRC_ERROR;
516 				goto err;
517 			}
518 			return;
519 		}
520 	}
521 
522 	if (fsp->xfer_contig_end == start_offset)
523 		fsp->xfer_contig_end += copy_len;
524 	fsp->xfer_len += copy_len;
525 
526 	/*
527 	 * In the very rare event that this data arrived after the response
528 	 * and completes the transfer, call the completion handler.
529 	 */
530 	if (unlikely(fsp->state & FC_SRB_RCV_STATUS) &&
531 	    fsp->xfer_len == fsp->data_len - fsp->scsi_resid)
532 		fc_fcp_complete_locked(fsp);
533 	return;
534 err:
535 	fc_fcp_recovery(fsp, host_bcode);
536 }
537 
538 /**
539  * fc_fcp_send_data() - Send SCSI data to a target
540  * @fsp:      The FCP packet the data is on
541  * @sp:	      The sequence the data is to be sent on
542  * @offset:   The starting offset for this data request
543  * @seq_blen: The burst length for this data request
544  *
545  * Called after receiving a Transfer Ready data descriptor.
546  * If the LLD is capable of sequence offload then send down the
547  * seq_blen amount of data in single frame, otherwise send
548  * multiple frames of the maximum frame payload supported by
549  * the target port.
550  */
fc_fcp_send_data(struct fc_fcp_pkt * fsp,struct fc_seq * seq,size_t offset,size_t seq_blen)551 static int fc_fcp_send_data(struct fc_fcp_pkt *fsp, struct fc_seq *seq,
552 			    size_t offset, size_t seq_blen)
553 {
554 	struct fc_exch *ep;
555 	struct scsi_cmnd *sc;
556 	struct scatterlist *sg;
557 	struct fc_frame *fp = NULL;
558 	struct fc_lport *lport = fsp->lp;
559 	struct page *page;
560 	size_t remaining;
561 	size_t t_blen;
562 	size_t tlen;
563 	size_t sg_bytes;
564 	size_t frame_offset, fh_parm_offset;
565 	size_t off;
566 	int error;
567 	void *data = NULL;
568 	void *page_addr;
569 	int using_sg = lport->sg_supp;
570 	u32 f_ctl;
571 
572 	WARN_ON(seq_blen <= 0);
573 	if (unlikely(offset + seq_blen > fsp->data_len)) {
574 		/* this should never happen */
575 		FC_FCP_DBG(fsp, "xfer-ready past end. seq_blen %zx "
576 			   "offset %zx\n", seq_blen, offset);
577 		fc_fcp_send_abort(fsp);
578 		return 0;
579 	} else if (offset != fsp->xfer_len) {
580 		/* Out of Order Data Request - no problem, but unexpected. */
581 		FC_FCP_DBG(fsp, "xfer-ready non-contiguous. "
582 			   "seq_blen %zx offset %zx\n", seq_blen, offset);
583 	}
584 
585 	/*
586 	 * if LLD is capable of seq_offload then set transport
587 	 * burst length (t_blen) to seq_blen, otherwise set t_blen
588 	 * to max FC frame payload previously set in fsp->max_payload.
589 	 */
590 	t_blen = fsp->max_payload;
591 	if (lport->seq_offload) {
592 		t_blen = min(seq_blen, (size_t)lport->lso_max);
593 		FC_FCP_DBG(fsp, "fsp=%p:lso:blen=%zx lso_max=0x%x t_blen=%zx\n",
594 			   fsp, seq_blen, lport->lso_max, t_blen);
595 	}
596 
597 	if (t_blen > 512)
598 		t_blen &= ~(512 - 1);	/* round down to block size */
599 	sc = fsp->cmd;
600 
601 	remaining = seq_blen;
602 	fh_parm_offset = frame_offset = offset;
603 	tlen = 0;
604 	seq = lport->tt.seq_start_next(seq);
605 	f_ctl = FC_FC_REL_OFF;
606 	WARN_ON(!seq);
607 
608 	sg = scsi_sglist(sc);
609 
610 	while (remaining > 0 && sg) {
611 		if (offset >= sg->length) {
612 			offset -= sg->length;
613 			sg = sg_next(sg);
614 			continue;
615 		}
616 		if (!fp) {
617 			tlen = min(t_blen, remaining);
618 
619 			/*
620 			 * TODO.  Temporary workaround.	 fc_seq_send() can't
621 			 * handle odd lengths in non-linear skbs.
622 			 * This will be the final fragment only.
623 			 */
624 			if (tlen % 4)
625 				using_sg = 0;
626 			fp = fc_frame_alloc(lport, using_sg ? 0 : tlen);
627 			if (!fp)
628 				return -ENOMEM;
629 
630 			data = fc_frame_header_get(fp) + 1;
631 			fh_parm_offset = frame_offset;
632 			fr_max_payload(fp) = fsp->max_payload;
633 		}
634 
635 		off = offset + sg->offset;
636 		sg_bytes = min(tlen, sg->length - offset);
637 		sg_bytes = min(sg_bytes,
638 			       (size_t) (PAGE_SIZE - (off & ~PAGE_MASK)));
639 		page = sg_page(sg) + (off >> PAGE_SHIFT);
640 		if (using_sg) {
641 			get_page(page);
642 			skb_fill_page_desc(fp_skb(fp),
643 					   skb_shinfo(fp_skb(fp))->nr_frags,
644 					   page, off & ~PAGE_MASK, sg_bytes);
645 			fp_skb(fp)->data_len += sg_bytes;
646 			fr_len(fp) += sg_bytes;
647 			fp_skb(fp)->truesize += PAGE_SIZE;
648 		} else {
649 			/*
650 			 * The scatterlist item may be bigger than PAGE_SIZE,
651 			 * but we must not cross pages inside the kmap.
652 			 */
653 			page_addr = kmap_atomic(page);
654 			memcpy(data, (char *)page_addr + (off & ~PAGE_MASK),
655 			       sg_bytes);
656 			kunmap_atomic(page_addr);
657 			data += sg_bytes;
658 		}
659 		offset += sg_bytes;
660 		frame_offset += sg_bytes;
661 		tlen -= sg_bytes;
662 		remaining -= sg_bytes;
663 
664 		if ((skb_shinfo(fp_skb(fp))->nr_frags < FC_FRAME_SG_LEN) &&
665 		    (tlen))
666 			continue;
667 
668 		/*
669 		 * Send sequence with transfer sequence initiative in case
670 		 * this is last FCP frame of the sequence.
671 		 */
672 		if (remaining == 0)
673 			f_ctl |= FC_FC_SEQ_INIT | FC_FC_END_SEQ;
674 
675 		ep = fc_seq_exch(seq);
676 		fc_fill_fc_hdr(fp, FC_RCTL_DD_SOL_DATA, ep->did, ep->sid,
677 			       FC_TYPE_FCP, f_ctl, fh_parm_offset);
678 
679 		/*
680 		 * send fragment using for a sequence.
681 		 */
682 		error = lport->tt.seq_send(lport, seq, fp);
683 		if (error) {
684 			WARN_ON(1);		/* send error should be rare */
685 			return error;
686 		}
687 		fp = NULL;
688 	}
689 	fsp->xfer_len += seq_blen;	/* premature count? */
690 	return 0;
691 }
692 
693 /**
694  * fc_fcp_abts_resp() - Receive an ABTS response
695  * @fsp: The FCP packet that is being aborted
696  * @fp:	 The response frame
697  */
fc_fcp_abts_resp(struct fc_fcp_pkt * fsp,struct fc_frame * fp)698 static void fc_fcp_abts_resp(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
699 {
700 	int ba_done = 1;
701 	struct fc_ba_rjt *brp;
702 	struct fc_frame_header *fh;
703 
704 	fh = fc_frame_header_get(fp);
705 	switch (fh->fh_r_ctl) {
706 	case FC_RCTL_BA_ACC:
707 		break;
708 	case FC_RCTL_BA_RJT:
709 		brp = fc_frame_payload_get(fp, sizeof(*brp));
710 		if (brp && brp->br_reason == FC_BA_RJT_LOG_ERR)
711 			break;
712 		/* fall thru */
713 	default:
714 		/*
715 		 * we will let the command timeout
716 		 * and scsi-ml recover in this case,
717 		 * therefore cleared the ba_done flag.
718 		 */
719 		ba_done = 0;
720 	}
721 
722 	if (ba_done) {
723 		fsp->state |= FC_SRB_ABORTED;
724 		fsp->state &= ~FC_SRB_ABORT_PENDING;
725 
726 		if (fsp->wait_for_comp)
727 			complete(&fsp->tm_done);
728 		else
729 			fc_fcp_complete_locked(fsp);
730 	}
731 }
732 
733 /**
734  * fc_fcp_recv() - Receive an FCP frame
735  * @seq: The sequence the frame is on
736  * @fp:	 The received frame
737  * @arg: The related FCP packet
738  *
739  * Context: Called from Soft IRQ context. Can not be called
740  *	    holding the FCP packet list lock.
741  */
fc_fcp_recv(struct fc_seq * seq,struct fc_frame * fp,void * arg)742 static void fc_fcp_recv(struct fc_seq *seq, struct fc_frame *fp, void *arg)
743 {
744 	struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)arg;
745 	struct fc_lport *lport = fsp->lp;
746 	struct fc_frame_header *fh;
747 	struct fcp_txrdy *dd;
748 	u8 r_ctl;
749 	int rc = 0;
750 
751 	if (IS_ERR(fp)) {
752 		fc_fcp_error(fsp, fp);
753 		return;
754 	}
755 
756 	fh = fc_frame_header_get(fp);
757 	r_ctl = fh->fh_r_ctl;
758 
759 	if (lport->state != LPORT_ST_READY)
760 		goto out;
761 	if (fc_fcp_lock_pkt(fsp))
762 		goto out;
763 
764 	if (fh->fh_type == FC_TYPE_BLS) {
765 		fc_fcp_abts_resp(fsp, fp);
766 		goto unlock;
767 	}
768 
769 	if (fsp->state & (FC_SRB_ABORTED | FC_SRB_ABORT_PENDING))
770 		goto unlock;
771 
772 	if (r_ctl == FC_RCTL_DD_DATA_DESC) {
773 		/*
774 		 * received XFER RDY from the target
775 		 * need to send data to the target
776 		 */
777 		WARN_ON(fr_flags(fp) & FCPHF_CRC_UNCHECKED);
778 		dd = fc_frame_payload_get(fp, sizeof(*dd));
779 		WARN_ON(!dd);
780 
781 		rc = fc_fcp_send_data(fsp, seq,
782 				      (size_t) ntohl(dd->ft_data_ro),
783 				      (size_t) ntohl(dd->ft_burst_len));
784 		if (!rc)
785 			seq->rec_data = fsp->xfer_len;
786 	} else if (r_ctl == FC_RCTL_DD_SOL_DATA) {
787 		/*
788 		 * received a DATA frame
789 		 * next we will copy the data to the system buffer
790 		 */
791 		WARN_ON(fr_len(fp) < sizeof(*fh));	/* len may be 0 */
792 		fc_fcp_recv_data(fsp, fp);
793 		seq->rec_data = fsp->xfer_contig_end;
794 	} else if (r_ctl == FC_RCTL_DD_CMD_STATUS) {
795 		WARN_ON(fr_flags(fp) & FCPHF_CRC_UNCHECKED);
796 
797 		fc_fcp_resp(fsp, fp);
798 	} else {
799 		FC_FCP_DBG(fsp, "unexpected frame.  r_ctl %x\n", r_ctl);
800 	}
801 unlock:
802 	fc_fcp_unlock_pkt(fsp);
803 out:
804 	fc_frame_free(fp);
805 }
806 
807 /**
808  * fc_fcp_resp() - Handler for FCP responses
809  * @fsp: The FCP packet the response is for
810  * @fp:	 The response frame
811  */
fc_fcp_resp(struct fc_fcp_pkt * fsp,struct fc_frame * fp)812 static void fc_fcp_resp(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
813 {
814 	struct fc_frame_header *fh;
815 	struct fcp_resp *fc_rp;
816 	struct fcp_resp_ext *rp_ex;
817 	struct fcp_resp_rsp_info *fc_rp_info;
818 	u32 plen;
819 	u32 expected_len;
820 	u32 respl = 0;
821 	u32 snsl = 0;
822 	u8 flags = 0;
823 
824 	plen = fr_len(fp);
825 	fh = (struct fc_frame_header *)fr_hdr(fp);
826 	if (unlikely(plen < sizeof(*fh) + sizeof(*fc_rp)))
827 		goto len_err;
828 	plen -= sizeof(*fh);
829 	fc_rp = (struct fcp_resp *)(fh + 1);
830 	fsp->cdb_status = fc_rp->fr_status;
831 	flags = fc_rp->fr_flags;
832 	fsp->scsi_comp_flags = flags;
833 	expected_len = fsp->data_len;
834 
835 	/* if ddp, update xfer len */
836 	fc_fcp_ddp_done(fsp);
837 
838 	if (unlikely((flags & ~FCP_CONF_REQ) || fc_rp->fr_status)) {
839 		rp_ex = (void *)(fc_rp + 1);
840 		if (flags & (FCP_RSP_LEN_VAL | FCP_SNS_LEN_VAL)) {
841 			if (plen < sizeof(*fc_rp) + sizeof(*rp_ex))
842 				goto len_err;
843 			fc_rp_info = (struct fcp_resp_rsp_info *)(rp_ex + 1);
844 			if (flags & FCP_RSP_LEN_VAL) {
845 				respl = ntohl(rp_ex->fr_rsp_len);
846 				if (respl != sizeof(*fc_rp_info))
847 					goto len_err;
848 				if (fsp->wait_for_comp) {
849 					/* Abuse cdb_status for rsp code */
850 					fsp->cdb_status = fc_rp_info->rsp_code;
851 					complete(&fsp->tm_done);
852 					/*
853 					 * tmfs will not have any scsi cmd so
854 					 * exit here
855 					 */
856 					return;
857 				}
858 			}
859 			if (flags & FCP_SNS_LEN_VAL) {
860 				snsl = ntohl(rp_ex->fr_sns_len);
861 				if (snsl > SCSI_SENSE_BUFFERSIZE)
862 					snsl = SCSI_SENSE_BUFFERSIZE;
863 				memcpy(fsp->cmd->sense_buffer,
864 				       (char *)fc_rp_info + respl, snsl);
865 			}
866 		}
867 		if (flags & (FCP_RESID_UNDER | FCP_RESID_OVER)) {
868 			if (plen < sizeof(*fc_rp) + sizeof(rp_ex->fr_resid))
869 				goto len_err;
870 			if (flags & FCP_RESID_UNDER) {
871 				fsp->scsi_resid = ntohl(rp_ex->fr_resid);
872 				/*
873 				 * The cmnd->underflow is the minimum number of
874 				 * bytes that must be transferred for this
875 				 * command.  Provided a sense condition is not
876 				 * present, make sure the actual amount
877 				 * transferred is at least the underflow value
878 				 * or fail.
879 				 */
880 				if (!(flags & FCP_SNS_LEN_VAL) &&
881 				    (fc_rp->fr_status == 0) &&
882 				    (scsi_bufflen(fsp->cmd) -
883 				     fsp->scsi_resid) < fsp->cmd->underflow)
884 					goto err;
885 				expected_len -= fsp->scsi_resid;
886 			} else {
887 				fsp->status_code = FC_ERROR;
888 			}
889 		}
890 	}
891 	fsp->state |= FC_SRB_RCV_STATUS;
892 
893 	/*
894 	 * Check for missing or extra data frames.
895 	 */
896 	if (unlikely(fsp->xfer_len != expected_len)) {
897 		if (fsp->xfer_len < expected_len) {
898 			/*
899 			 * Some data may be queued locally,
900 			 * Wait a at least one jiffy to see if it is delivered.
901 			 * If this expires without data, we may do SRR.
902 			 */
903 			fc_fcp_timer_set(fsp, 2);
904 			return;
905 		}
906 		fsp->status_code = FC_DATA_OVRRUN;
907 		FC_FCP_DBG(fsp, "tgt %6.6x xfer len %zx greater than expected, "
908 			   "len %x, data len %x\n",
909 			   fsp->rport->port_id,
910 			   fsp->xfer_len, expected_len, fsp->data_len);
911 	}
912 	fc_fcp_complete_locked(fsp);
913 	return;
914 
915 len_err:
916 	FC_FCP_DBG(fsp, "short FCP response. flags 0x%x len %u respl %u "
917 		   "snsl %u\n", flags, fr_len(fp), respl, snsl);
918 err:
919 	fsp->status_code = FC_ERROR;
920 	fc_fcp_complete_locked(fsp);
921 }
922 
923 /**
924  * fc_fcp_complete_locked() - Complete processing of a fcp_pkt with the
925  *			      fcp_pkt lock held
926  * @fsp: The FCP packet to be completed
927  *
928  * This function may sleep if a timer is pending. The packet lock must be
929  * held, and the host lock must not be held.
930  */
fc_fcp_complete_locked(struct fc_fcp_pkt * fsp)931 static void fc_fcp_complete_locked(struct fc_fcp_pkt *fsp)
932 {
933 	struct fc_lport *lport = fsp->lp;
934 	struct fc_seq *seq;
935 	struct fc_exch *ep;
936 	u32 f_ctl;
937 
938 	if (fsp->state & FC_SRB_ABORT_PENDING)
939 		return;
940 
941 	if (fsp->state & FC_SRB_ABORTED) {
942 		if (!fsp->status_code)
943 			fsp->status_code = FC_CMD_ABORTED;
944 	} else {
945 		/*
946 		 * Test for transport underrun, independent of response
947 		 * underrun status.
948 		 */
949 		if (fsp->xfer_len < fsp->data_len && !fsp->io_status &&
950 		    (!(fsp->scsi_comp_flags & FCP_RESID_UNDER) ||
951 		     fsp->xfer_len < fsp->data_len - fsp->scsi_resid)) {
952 			fsp->status_code = FC_DATA_UNDRUN;
953 			fsp->io_status = 0;
954 		}
955 	}
956 
957 	seq = fsp->seq_ptr;
958 	if (seq) {
959 		fsp->seq_ptr = NULL;
960 		if (unlikely(fsp->scsi_comp_flags & FCP_CONF_REQ)) {
961 			struct fc_frame *conf_frame;
962 			struct fc_seq *csp;
963 
964 			csp = lport->tt.seq_start_next(seq);
965 			conf_frame = fc_fcp_frame_alloc(fsp->lp, 0);
966 			if (conf_frame) {
967 				f_ctl = FC_FC_SEQ_INIT;
968 				f_ctl |= FC_FC_LAST_SEQ | FC_FC_END_SEQ;
969 				ep = fc_seq_exch(seq);
970 				fc_fill_fc_hdr(conf_frame, FC_RCTL_DD_SOL_CTL,
971 					       ep->did, ep->sid,
972 					       FC_TYPE_FCP, f_ctl, 0);
973 				lport->tt.seq_send(lport, csp, conf_frame);
974 			}
975 		}
976 		lport->tt.exch_done(seq);
977 	}
978 	/*
979 	 * Some resets driven by SCSI are not I/Os and do not have
980 	 * SCSI commands associated with the requests. We should not
981 	 * call I/O completion if we do not have a SCSI command.
982 	 */
983 	if (fsp->cmd)
984 		fc_io_compl(fsp);
985 }
986 
987 /**
988  * fc_fcp_cleanup_cmd() - Cancel the active exchange on a fcp_pkt
989  * @fsp:   The FCP packet whose exchanges should be canceled
990  * @error: The reason for the cancellation
991  */
fc_fcp_cleanup_cmd(struct fc_fcp_pkt * fsp,int error)992 static void fc_fcp_cleanup_cmd(struct fc_fcp_pkt *fsp, int error)
993 {
994 	struct fc_lport *lport = fsp->lp;
995 
996 	if (fsp->seq_ptr) {
997 		lport->tt.exch_done(fsp->seq_ptr);
998 		fsp->seq_ptr = NULL;
999 	}
1000 	fsp->status_code = error;
1001 }
1002 
1003 /**
1004  * fc_fcp_cleanup_each_cmd() - Cancel all exchanges on a local port
1005  * @lport: The local port whose exchanges should be canceled
1006  * @id:	   The target's ID
1007  * @lun:   The LUN
1008  * @error: The reason for cancellation
1009  *
1010  * If lun or id is -1, they are ignored.
1011  */
fc_fcp_cleanup_each_cmd(struct fc_lport * lport,unsigned int id,unsigned int lun,int error)1012 static void fc_fcp_cleanup_each_cmd(struct fc_lport *lport, unsigned int id,
1013 				    unsigned int lun, int error)
1014 {
1015 	struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
1016 	struct fc_fcp_pkt *fsp;
1017 	struct scsi_cmnd *sc_cmd;
1018 	unsigned long flags;
1019 
1020 	spin_lock_irqsave(&si->scsi_queue_lock, flags);
1021 restart:
1022 	list_for_each_entry(fsp, &si->scsi_pkt_queue, list) {
1023 		sc_cmd = fsp->cmd;
1024 		if (id != -1 && scmd_id(sc_cmd) != id)
1025 			continue;
1026 
1027 		if (lun != -1 && sc_cmd->device->lun != lun)
1028 			continue;
1029 
1030 		fc_fcp_pkt_hold(fsp);
1031 		spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
1032 
1033 		if (!fc_fcp_lock_pkt(fsp)) {
1034 			fc_fcp_cleanup_cmd(fsp, error);
1035 			fc_io_compl(fsp);
1036 			fc_fcp_unlock_pkt(fsp);
1037 		}
1038 
1039 		fc_fcp_pkt_release(fsp);
1040 		spin_lock_irqsave(&si->scsi_queue_lock, flags);
1041 		/*
1042 		 * while we dropped the lock multiple pkts could
1043 		 * have been released, so we have to start over.
1044 		 */
1045 		goto restart;
1046 	}
1047 	spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
1048 }
1049 
1050 /**
1051  * fc_fcp_abort_io() - Abort all FCP-SCSI exchanges on a local port
1052  * @lport: The local port whose exchanges are to be aborted
1053  */
fc_fcp_abort_io(struct fc_lport * lport)1054 static void fc_fcp_abort_io(struct fc_lport *lport)
1055 {
1056 	fc_fcp_cleanup_each_cmd(lport, -1, -1, FC_HRD_ERROR);
1057 }
1058 
1059 /**
1060  * fc_fcp_pkt_send() - Send a fcp_pkt
1061  * @lport: The local port to send the FCP packet on
1062  * @fsp:   The FCP packet to send
1063  *
1064  * Return:  Zero for success and -1 for failure
1065  * Locks:   Called without locks held
1066  */
fc_fcp_pkt_send(struct fc_lport * lport,struct fc_fcp_pkt * fsp)1067 static int fc_fcp_pkt_send(struct fc_lport *lport, struct fc_fcp_pkt *fsp)
1068 {
1069 	struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
1070 	unsigned long flags;
1071 	int rc;
1072 
1073 	fsp->cmd->SCp.ptr = (char *)fsp;
1074 	fsp->cdb_cmd.fc_dl = htonl(fsp->data_len);
1075 	fsp->cdb_cmd.fc_flags = fsp->req_flags & ~FCP_CFL_LEN_MASK;
1076 
1077 	int_to_scsilun(fsp->cmd->device->lun, &fsp->cdb_cmd.fc_lun);
1078 	memcpy(fsp->cdb_cmd.fc_cdb, fsp->cmd->cmnd, fsp->cmd->cmd_len);
1079 
1080 	spin_lock_irqsave(&si->scsi_queue_lock, flags);
1081 	list_add_tail(&fsp->list, &si->scsi_pkt_queue);
1082 	spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
1083 	rc = lport->tt.fcp_cmd_send(lport, fsp, fc_fcp_recv);
1084 	if (unlikely(rc)) {
1085 		spin_lock_irqsave(&si->scsi_queue_lock, flags);
1086 		fsp->cmd->SCp.ptr = NULL;
1087 		list_del(&fsp->list);
1088 		spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
1089 	}
1090 
1091 	return rc;
1092 }
1093 
1094 /**
1095  * get_fsp_rec_tov() - Helper function to get REC_TOV
1096  * @fsp: the FCP packet
1097  *
1098  * Returns rec tov in jiffies as rpriv->e_d_tov + 1 second
1099  */
get_fsp_rec_tov(struct fc_fcp_pkt * fsp)1100 static inline unsigned int get_fsp_rec_tov(struct fc_fcp_pkt *fsp)
1101 {
1102 	struct fc_rport_libfc_priv *rpriv = fsp->rport->dd_data;
1103 
1104 	return msecs_to_jiffies(rpriv->e_d_tov) + HZ;
1105 }
1106 
1107 /**
1108  * fc_fcp_cmd_send() - Send a FCP command
1109  * @lport: The local port to send the command on
1110  * @fsp:   The FCP packet the command is on
1111  * @resp:  The handler for the response
1112  */
fc_fcp_cmd_send(struct fc_lport * lport,struct fc_fcp_pkt * fsp,void (* resp)(struct fc_seq *,struct fc_frame * fp,void * arg))1113 static int fc_fcp_cmd_send(struct fc_lport *lport, struct fc_fcp_pkt *fsp,
1114 			   void (*resp)(struct fc_seq *,
1115 					struct fc_frame *fp,
1116 					void *arg))
1117 {
1118 	struct fc_frame *fp;
1119 	struct fc_seq *seq;
1120 	struct fc_rport *rport;
1121 	struct fc_rport_libfc_priv *rpriv;
1122 	const size_t len = sizeof(fsp->cdb_cmd);
1123 	int rc = 0;
1124 
1125 	if (fc_fcp_lock_pkt(fsp))
1126 		return 0;
1127 
1128 	fp = fc_fcp_frame_alloc(lport, sizeof(fsp->cdb_cmd));
1129 	if (!fp) {
1130 		rc = -1;
1131 		goto unlock;
1132 	}
1133 
1134 	memcpy(fc_frame_payload_get(fp, len), &fsp->cdb_cmd, len);
1135 	fr_fsp(fp) = fsp;
1136 	rport = fsp->rport;
1137 	fsp->max_payload = rport->maxframe_size;
1138 	rpriv = rport->dd_data;
1139 
1140 	fc_fill_fc_hdr(fp, FC_RCTL_DD_UNSOL_CMD, rport->port_id,
1141 		       rpriv->local_port->port_id, FC_TYPE_FCP,
1142 		       FC_FCTL_REQ, 0);
1143 
1144 	seq = lport->tt.exch_seq_send(lport, fp, resp, fc_fcp_pkt_destroy,
1145 				      fsp, 0);
1146 	if (!seq) {
1147 		rc = -1;
1148 		goto unlock;
1149 	}
1150 	fsp->seq_ptr = seq;
1151 	fc_fcp_pkt_hold(fsp);	/* hold for fc_fcp_pkt_destroy */
1152 
1153 	setup_timer(&fsp->timer, fc_fcp_timeout, (unsigned long)fsp);
1154 	if (rpriv->flags & FC_RP_FLAGS_REC_SUPPORTED)
1155 		fc_fcp_timer_set(fsp, get_fsp_rec_tov(fsp));
1156 
1157 unlock:
1158 	fc_fcp_unlock_pkt(fsp);
1159 	return rc;
1160 }
1161 
1162 /**
1163  * fc_fcp_error() - Handler for FCP layer errors
1164  * @fsp: The FCP packet the error is on
1165  * @fp:	 The frame that has errored
1166  */
fc_fcp_error(struct fc_fcp_pkt * fsp,struct fc_frame * fp)1167 static void fc_fcp_error(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
1168 {
1169 	int error = PTR_ERR(fp);
1170 
1171 	if (fc_fcp_lock_pkt(fsp))
1172 		return;
1173 
1174 	if (error == -FC_EX_CLOSED) {
1175 		fc_fcp_retry_cmd(fsp);
1176 		goto unlock;
1177 	}
1178 
1179 	/*
1180 	 * clear abort pending, because the lower layer
1181 	 * decided to force completion.
1182 	 */
1183 	fsp->state &= ~FC_SRB_ABORT_PENDING;
1184 	fsp->status_code = FC_CMD_PLOGO;
1185 	fc_fcp_complete_locked(fsp);
1186 unlock:
1187 	fc_fcp_unlock_pkt(fsp);
1188 }
1189 
1190 /**
1191  * fc_fcp_pkt_abort() - Abort a fcp_pkt
1192  * @fsp:   The FCP packet to abort on
1193  *
1194  * Called to send an abort and then wait for abort completion
1195  */
fc_fcp_pkt_abort(struct fc_fcp_pkt * fsp)1196 static int fc_fcp_pkt_abort(struct fc_fcp_pkt *fsp)
1197 {
1198 	int rc = FAILED;
1199 	unsigned long ticks_left;
1200 
1201 	if (fc_fcp_send_abort(fsp))
1202 		return FAILED;
1203 
1204 	init_completion(&fsp->tm_done);
1205 	fsp->wait_for_comp = 1;
1206 
1207 	spin_unlock_bh(&fsp->scsi_pkt_lock);
1208 	ticks_left = wait_for_completion_timeout(&fsp->tm_done,
1209 							FC_SCSI_TM_TOV);
1210 	spin_lock_bh(&fsp->scsi_pkt_lock);
1211 	fsp->wait_for_comp = 0;
1212 
1213 	if (!ticks_left) {
1214 		FC_FCP_DBG(fsp, "target abort cmd  failed\n");
1215 	} else if (fsp->state & FC_SRB_ABORTED) {
1216 		FC_FCP_DBG(fsp, "target abort cmd  passed\n");
1217 		rc = SUCCESS;
1218 		fc_fcp_complete_locked(fsp);
1219 	}
1220 
1221 	return rc;
1222 }
1223 
1224 /**
1225  * fc_lun_reset_send() - Send LUN reset command
1226  * @data: The FCP packet that identifies the LUN to be reset
1227  */
fc_lun_reset_send(unsigned long data)1228 static void fc_lun_reset_send(unsigned long data)
1229 {
1230 	struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)data;
1231 	struct fc_lport *lport = fsp->lp;
1232 
1233 	if (lport->tt.fcp_cmd_send(lport, fsp, fc_tm_done)) {
1234 		if (fsp->recov_retry++ >= FC_MAX_RECOV_RETRY)
1235 			return;
1236 		if (fc_fcp_lock_pkt(fsp))
1237 			return;
1238 		setup_timer(&fsp->timer, fc_lun_reset_send, (unsigned long)fsp);
1239 		fc_fcp_timer_set(fsp, get_fsp_rec_tov(fsp));
1240 		fc_fcp_unlock_pkt(fsp);
1241 	}
1242 }
1243 
1244 /**
1245  * fc_lun_reset() - Send a LUN RESET command to a device
1246  *		    and wait for the reply
1247  * @lport: The local port to sent the command on
1248  * @fsp:   The FCP packet that identifies the LUN to be reset
1249  * @id:	   The SCSI command ID
1250  * @lun:   The LUN ID to be reset
1251  */
fc_lun_reset(struct fc_lport * lport,struct fc_fcp_pkt * fsp,unsigned int id,unsigned int lun)1252 static int fc_lun_reset(struct fc_lport *lport, struct fc_fcp_pkt *fsp,
1253 			unsigned int id, unsigned int lun)
1254 {
1255 	int rc;
1256 
1257 	fsp->cdb_cmd.fc_dl = htonl(fsp->data_len);
1258 	fsp->cdb_cmd.fc_tm_flags = FCP_TMF_LUN_RESET;
1259 	int_to_scsilun(lun, &fsp->cdb_cmd.fc_lun);
1260 
1261 	fsp->wait_for_comp = 1;
1262 	init_completion(&fsp->tm_done);
1263 
1264 	fc_lun_reset_send((unsigned long)fsp);
1265 
1266 	/*
1267 	 * wait for completion of reset
1268 	 * after that make sure all commands are terminated
1269 	 */
1270 	rc = wait_for_completion_timeout(&fsp->tm_done, FC_SCSI_TM_TOV);
1271 
1272 	spin_lock_bh(&fsp->scsi_pkt_lock);
1273 	fsp->state |= FC_SRB_COMPL;
1274 	spin_unlock_bh(&fsp->scsi_pkt_lock);
1275 
1276 	del_timer_sync(&fsp->timer);
1277 
1278 	spin_lock_bh(&fsp->scsi_pkt_lock);
1279 	if (fsp->seq_ptr) {
1280 		lport->tt.exch_done(fsp->seq_ptr);
1281 		fsp->seq_ptr = NULL;
1282 	}
1283 	fsp->wait_for_comp = 0;
1284 	spin_unlock_bh(&fsp->scsi_pkt_lock);
1285 
1286 	if (!rc) {
1287 		FC_SCSI_DBG(lport, "lun reset failed\n");
1288 		return FAILED;
1289 	}
1290 
1291 	/* cdb_status holds the tmf's rsp code */
1292 	if (fsp->cdb_status != FCP_TMF_CMPL)
1293 		return FAILED;
1294 
1295 	FC_SCSI_DBG(lport, "lun reset to lun %u completed\n", lun);
1296 	fc_fcp_cleanup_each_cmd(lport, id, lun, FC_CMD_ABORTED);
1297 	return SUCCESS;
1298 }
1299 
1300 /**
1301  * fc_tm_done() - Task Management response handler
1302  * @seq: The sequence that the response is on
1303  * @fp:	 The response frame
1304  * @arg: The FCP packet the response is for
1305  */
fc_tm_done(struct fc_seq * seq,struct fc_frame * fp,void * arg)1306 static void fc_tm_done(struct fc_seq *seq, struct fc_frame *fp, void *arg)
1307 {
1308 	struct fc_fcp_pkt *fsp = arg;
1309 	struct fc_frame_header *fh;
1310 
1311 	if (IS_ERR(fp)) {
1312 		/*
1313 		 * If there is an error just let it timeout or wait
1314 		 * for TMF to be aborted if it timedout.
1315 		 *
1316 		 * scsi-eh will escalate for when either happens.
1317 		 */
1318 		return;
1319 	}
1320 
1321 	if (fc_fcp_lock_pkt(fsp))
1322 		goto out;
1323 
1324 	/*
1325 	 * raced with eh timeout handler.
1326 	 */
1327 	if (!fsp->seq_ptr || !fsp->wait_for_comp)
1328 		goto out_unlock;
1329 
1330 	fh = fc_frame_header_get(fp);
1331 	if (fh->fh_type != FC_TYPE_BLS)
1332 		fc_fcp_resp(fsp, fp);
1333 	fsp->seq_ptr = NULL;
1334 	fsp->lp->tt.exch_done(seq);
1335 out_unlock:
1336 	fc_fcp_unlock_pkt(fsp);
1337 out:
1338 	fc_frame_free(fp);
1339 }
1340 
1341 /**
1342  * fc_fcp_cleanup() - Cleanup all FCP exchanges on a local port
1343  * @lport: The local port to be cleaned up
1344  */
fc_fcp_cleanup(struct fc_lport * lport)1345 static void fc_fcp_cleanup(struct fc_lport *lport)
1346 {
1347 	fc_fcp_cleanup_each_cmd(lport, -1, -1, FC_ERROR);
1348 }
1349 
1350 /**
1351  * fc_fcp_timeout() - Handler for fcp_pkt timeouts
1352  * @data: The FCP packet that has timed out
1353  *
1354  * If REC is supported then just issue it and return. The REC exchange will
1355  * complete or time out and recovery can continue at that point. Otherwise,
1356  * if the response has been received without all the data it has been
1357  * ER_TIMEOUT since the response was received. If the response has not been
1358  * received we see if data was received recently. If it has been then we
1359  * continue waiting, otherwise, we abort the command.
1360  */
fc_fcp_timeout(unsigned long data)1361 static void fc_fcp_timeout(unsigned long data)
1362 {
1363 	struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)data;
1364 	struct fc_rport *rport = fsp->rport;
1365 	struct fc_rport_libfc_priv *rpriv = rport->dd_data;
1366 
1367 	if (fc_fcp_lock_pkt(fsp))
1368 		return;
1369 
1370 	if (fsp->cdb_cmd.fc_tm_flags)
1371 		goto unlock;
1372 
1373 	fsp->state |= FC_SRB_FCP_PROCESSING_TMO;
1374 
1375 	if (rpriv->flags & FC_RP_FLAGS_REC_SUPPORTED)
1376 		fc_fcp_rec(fsp);
1377 	else if (fsp->state & FC_SRB_RCV_STATUS)
1378 		fc_fcp_complete_locked(fsp);
1379 	else
1380 		fc_fcp_recovery(fsp, FC_TIMED_OUT);
1381 	fsp->state &= ~FC_SRB_FCP_PROCESSING_TMO;
1382 unlock:
1383 	fc_fcp_unlock_pkt(fsp);
1384 }
1385 
1386 /**
1387  * fc_fcp_rec() - Send a REC ELS request
1388  * @fsp: The FCP packet to send the REC request on
1389  */
fc_fcp_rec(struct fc_fcp_pkt * fsp)1390 static void fc_fcp_rec(struct fc_fcp_pkt *fsp)
1391 {
1392 	struct fc_lport *lport;
1393 	struct fc_frame *fp;
1394 	struct fc_rport *rport;
1395 	struct fc_rport_libfc_priv *rpriv;
1396 
1397 	lport = fsp->lp;
1398 	rport = fsp->rport;
1399 	rpriv = rport->dd_data;
1400 	if (!fsp->seq_ptr || rpriv->rp_state != RPORT_ST_READY) {
1401 		fsp->status_code = FC_HRD_ERROR;
1402 		fsp->io_status = 0;
1403 		fc_fcp_complete_locked(fsp);
1404 		return;
1405 	}
1406 
1407 	fp = fc_fcp_frame_alloc(lport, sizeof(struct fc_els_rec));
1408 	if (!fp)
1409 		goto retry;
1410 
1411 	fr_seq(fp) = fsp->seq_ptr;
1412 	fc_fill_fc_hdr(fp, FC_RCTL_ELS_REQ, rport->port_id,
1413 		       rpriv->local_port->port_id, FC_TYPE_ELS,
1414 		       FC_FCTL_REQ, 0);
1415 	if (lport->tt.elsct_send(lport, rport->port_id, fp, ELS_REC,
1416 				 fc_fcp_rec_resp, fsp,
1417 				 2 * lport->r_a_tov)) {
1418 		fc_fcp_pkt_hold(fsp);		/* hold while REC outstanding */
1419 		return;
1420 	}
1421 retry:
1422 	if (fsp->recov_retry++ < FC_MAX_RECOV_RETRY)
1423 		fc_fcp_timer_set(fsp, get_fsp_rec_tov(fsp));
1424 	else
1425 		fc_fcp_recovery(fsp, FC_TIMED_OUT);
1426 }
1427 
1428 /**
1429  * fc_fcp_rec_resp() - Handler for REC ELS responses
1430  * @seq: The sequence the response is on
1431  * @fp:	 The response frame
1432  * @arg: The FCP packet the response is on
1433  *
1434  * If the response is a reject then the scsi layer will handle
1435  * the timeout. If the response is a LS_ACC then if the I/O was not completed
1436  * set the timeout and return. If the I/O was completed then complete the
1437  * exchange and tell the SCSI layer.
1438  */
fc_fcp_rec_resp(struct fc_seq * seq,struct fc_frame * fp,void * arg)1439 static void fc_fcp_rec_resp(struct fc_seq *seq, struct fc_frame *fp, void *arg)
1440 {
1441 	struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)arg;
1442 	struct fc_els_rec_acc *recp;
1443 	struct fc_els_ls_rjt *rjt;
1444 	u32 e_stat;
1445 	u8 opcode;
1446 	u32 offset;
1447 	enum dma_data_direction data_dir;
1448 	enum fc_rctl r_ctl;
1449 	struct fc_rport_libfc_priv *rpriv;
1450 
1451 	if (IS_ERR(fp)) {
1452 		fc_fcp_rec_error(fsp, fp);
1453 		return;
1454 	}
1455 
1456 	if (fc_fcp_lock_pkt(fsp))
1457 		goto out;
1458 
1459 	fsp->recov_retry = 0;
1460 	opcode = fc_frame_payload_op(fp);
1461 	if (opcode == ELS_LS_RJT) {
1462 		rjt = fc_frame_payload_get(fp, sizeof(*rjt));
1463 		switch (rjt->er_reason) {
1464 		default:
1465 			FC_FCP_DBG(fsp, "device %x unexpected REC reject "
1466 				   "reason %d expl %d\n",
1467 				   fsp->rport->port_id, rjt->er_reason,
1468 				   rjt->er_explan);
1469 			/* fall through */
1470 		case ELS_RJT_UNSUP:
1471 			FC_FCP_DBG(fsp, "device does not support REC\n");
1472 			rpriv = fsp->rport->dd_data;
1473 			/*
1474 			 * if we do not spport RECs or got some bogus
1475 			 * reason then resetup timer so we check for
1476 			 * making progress.
1477 			 */
1478 			rpriv->flags &= ~FC_RP_FLAGS_REC_SUPPORTED;
1479 			break;
1480 		case ELS_RJT_LOGIC:
1481 		case ELS_RJT_UNAB:
1482 			/*
1483 			 * If no data transfer, the command frame got dropped
1484 			 * so we just retry.  If data was transferred, we
1485 			 * lost the response but the target has no record,
1486 			 * so we abort and retry.
1487 			 */
1488 			if (rjt->er_explan == ELS_EXPL_OXID_RXID &&
1489 			    fsp->xfer_len == 0) {
1490 				fc_fcp_retry_cmd(fsp);
1491 				break;
1492 			}
1493 			fc_fcp_recovery(fsp, FC_ERROR);
1494 			break;
1495 		}
1496 	} else if (opcode == ELS_LS_ACC) {
1497 		if (fsp->state & FC_SRB_ABORTED)
1498 			goto unlock_out;
1499 
1500 		data_dir = fsp->cmd->sc_data_direction;
1501 		recp = fc_frame_payload_get(fp, sizeof(*recp));
1502 		offset = ntohl(recp->reca_fc4value);
1503 		e_stat = ntohl(recp->reca_e_stat);
1504 
1505 		if (e_stat & ESB_ST_COMPLETE) {
1506 
1507 			/*
1508 			 * The exchange is complete.
1509 			 *
1510 			 * For output, we must've lost the response.
1511 			 * For input, all data must've been sent.
1512 			 * We lost may have lost the response
1513 			 * (and a confirmation was requested) and maybe
1514 			 * some data.
1515 			 *
1516 			 * If all data received, send SRR
1517 			 * asking for response.	 If partial data received,
1518 			 * or gaps, SRR requests data at start of gap.
1519 			 * Recovery via SRR relies on in-order-delivery.
1520 			 */
1521 			if (data_dir == DMA_TO_DEVICE) {
1522 				r_ctl = FC_RCTL_DD_CMD_STATUS;
1523 			} else if (fsp->xfer_contig_end == offset) {
1524 				r_ctl = FC_RCTL_DD_CMD_STATUS;
1525 			} else {
1526 				offset = fsp->xfer_contig_end;
1527 				r_ctl = FC_RCTL_DD_SOL_DATA;
1528 			}
1529 			fc_fcp_srr(fsp, r_ctl, offset);
1530 		} else if (e_stat & ESB_ST_SEQ_INIT) {
1531 			/*
1532 			 * The remote port has the initiative, so just
1533 			 * keep waiting for it to complete.
1534 			 */
1535 			fc_fcp_timer_set(fsp,  get_fsp_rec_tov(fsp));
1536 		} else {
1537 
1538 			/*
1539 			 * The exchange is incomplete, we have seq. initiative.
1540 			 * Lost response with requested confirmation,
1541 			 * lost confirmation, lost transfer ready or
1542 			 * lost write data.
1543 			 *
1544 			 * For output, if not all data was received, ask
1545 			 * for transfer ready to be repeated.
1546 			 *
1547 			 * If we received or sent all the data, send SRR to
1548 			 * request response.
1549 			 *
1550 			 * If we lost a response, we may have lost some read
1551 			 * data as well.
1552 			 */
1553 			r_ctl = FC_RCTL_DD_SOL_DATA;
1554 			if (data_dir == DMA_TO_DEVICE) {
1555 				r_ctl = FC_RCTL_DD_CMD_STATUS;
1556 				if (offset < fsp->data_len)
1557 					r_ctl = FC_RCTL_DD_DATA_DESC;
1558 			} else if (offset == fsp->xfer_contig_end) {
1559 				r_ctl = FC_RCTL_DD_CMD_STATUS;
1560 			} else if (fsp->xfer_contig_end < offset) {
1561 				offset = fsp->xfer_contig_end;
1562 			}
1563 			fc_fcp_srr(fsp, r_ctl, offset);
1564 		}
1565 	}
1566 unlock_out:
1567 	fc_fcp_unlock_pkt(fsp);
1568 out:
1569 	fc_fcp_pkt_release(fsp);	/* drop hold for outstanding REC */
1570 	fc_frame_free(fp);
1571 }
1572 
1573 /**
1574  * fc_fcp_rec_error() - Handler for REC errors
1575  * @fsp: The FCP packet the error is on
1576  * @fp:	 The REC frame
1577  */
fc_fcp_rec_error(struct fc_fcp_pkt * fsp,struct fc_frame * fp)1578 static void fc_fcp_rec_error(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
1579 {
1580 	int error = PTR_ERR(fp);
1581 
1582 	if (fc_fcp_lock_pkt(fsp))
1583 		goto out;
1584 
1585 	switch (error) {
1586 	case -FC_EX_CLOSED:
1587 		fc_fcp_retry_cmd(fsp);
1588 		break;
1589 
1590 	default:
1591 		FC_FCP_DBG(fsp, "REC %p fid %6.6x error unexpected error %d\n",
1592 			   fsp, fsp->rport->port_id, error);
1593 		fsp->status_code = FC_CMD_PLOGO;
1594 		/* fall through */
1595 
1596 	case -FC_EX_TIMEOUT:
1597 		/*
1598 		 * Assume REC or LS_ACC was lost.
1599 		 * The exchange manager will have aborted REC, so retry.
1600 		 */
1601 		FC_FCP_DBG(fsp, "REC fid %6.6x error error %d retry %d/%d\n",
1602 			   fsp->rport->port_id, error, fsp->recov_retry,
1603 			   FC_MAX_RECOV_RETRY);
1604 		if (fsp->recov_retry++ < FC_MAX_RECOV_RETRY)
1605 			fc_fcp_rec(fsp);
1606 		else
1607 			fc_fcp_recovery(fsp, FC_ERROR);
1608 		break;
1609 	}
1610 	fc_fcp_unlock_pkt(fsp);
1611 out:
1612 	fc_fcp_pkt_release(fsp);	/* drop hold for outstanding REC */
1613 }
1614 
1615 /**
1616  * fc_fcp_recovery() - Handler for fcp_pkt recovery
1617  * @fsp: The FCP pkt that needs to be aborted
1618  */
fc_fcp_recovery(struct fc_fcp_pkt * fsp,u8 code)1619 static void fc_fcp_recovery(struct fc_fcp_pkt *fsp, u8 code)
1620 {
1621 	fsp->status_code = code;
1622 	fsp->cdb_status = 0;
1623 	fsp->io_status = 0;
1624 	/*
1625 	 * if this fails then we let the scsi command timer fire and
1626 	 * scsi-ml escalate.
1627 	 */
1628 	fc_fcp_send_abort(fsp);
1629 }
1630 
1631 /**
1632  * fc_fcp_srr() - Send a SRR request (Sequence Retransmission Request)
1633  * @fsp:   The FCP packet the SRR is to be sent on
1634  * @r_ctl: The R_CTL field for the SRR request
1635  * This is called after receiving status but insufficient data, or
1636  * when expecting status but the request has timed out.
1637  */
fc_fcp_srr(struct fc_fcp_pkt * fsp,enum fc_rctl r_ctl,u32 offset)1638 static void fc_fcp_srr(struct fc_fcp_pkt *fsp, enum fc_rctl r_ctl, u32 offset)
1639 {
1640 	struct fc_lport *lport = fsp->lp;
1641 	struct fc_rport *rport;
1642 	struct fc_rport_libfc_priv *rpriv;
1643 	struct fc_exch *ep = fc_seq_exch(fsp->seq_ptr);
1644 	struct fc_seq *seq;
1645 	struct fcp_srr *srr;
1646 	struct fc_frame *fp;
1647 	unsigned int rec_tov;
1648 
1649 	rport = fsp->rport;
1650 	rpriv = rport->dd_data;
1651 
1652 	if (!(rpriv->flags & FC_RP_FLAGS_RETRY) ||
1653 	    rpriv->rp_state != RPORT_ST_READY)
1654 		goto retry;			/* shouldn't happen */
1655 	fp = fc_fcp_frame_alloc(lport, sizeof(*srr));
1656 	if (!fp)
1657 		goto retry;
1658 
1659 	srr = fc_frame_payload_get(fp, sizeof(*srr));
1660 	memset(srr, 0, sizeof(*srr));
1661 	srr->srr_op = ELS_SRR;
1662 	srr->srr_ox_id = htons(ep->oxid);
1663 	srr->srr_rx_id = htons(ep->rxid);
1664 	srr->srr_r_ctl = r_ctl;
1665 	srr->srr_rel_off = htonl(offset);
1666 
1667 	fc_fill_fc_hdr(fp, FC_RCTL_ELS4_REQ, rport->port_id,
1668 		       rpriv->local_port->port_id, FC_TYPE_FCP,
1669 		       FC_FCTL_REQ, 0);
1670 
1671 	rec_tov = get_fsp_rec_tov(fsp);
1672 	seq = lport->tt.exch_seq_send(lport, fp, fc_fcp_srr_resp,
1673 				      fc_fcp_pkt_destroy,
1674 				      fsp, jiffies_to_msecs(rec_tov));
1675 	if (!seq)
1676 		goto retry;
1677 
1678 	fsp->recov_seq = seq;
1679 	fsp->xfer_len = offset;
1680 	fsp->xfer_contig_end = offset;
1681 	fsp->state &= ~FC_SRB_RCV_STATUS;
1682 	fc_fcp_pkt_hold(fsp);		/* hold for outstanding SRR */
1683 	return;
1684 retry:
1685 	fc_fcp_retry_cmd(fsp);
1686 }
1687 
1688 /**
1689  * fc_fcp_srr_resp() - Handler for SRR response
1690  * @seq: The sequence the SRR is on
1691  * @fp:	 The SRR frame
1692  * @arg: The FCP packet the SRR is on
1693  */
fc_fcp_srr_resp(struct fc_seq * seq,struct fc_frame * fp,void * arg)1694 static void fc_fcp_srr_resp(struct fc_seq *seq, struct fc_frame *fp, void *arg)
1695 {
1696 	struct fc_fcp_pkt *fsp = arg;
1697 	struct fc_frame_header *fh;
1698 
1699 	if (IS_ERR(fp)) {
1700 		fc_fcp_srr_error(fsp, fp);
1701 		return;
1702 	}
1703 
1704 	if (fc_fcp_lock_pkt(fsp))
1705 		goto out;
1706 
1707 	fh = fc_frame_header_get(fp);
1708 	/*
1709 	 * BUG? fc_fcp_srr_error calls exch_done which would release
1710 	 * the ep. But if fc_fcp_srr_error had got -FC_EX_TIMEOUT,
1711 	 * then fc_exch_timeout would be sending an abort. The exch_done
1712 	 * call by fc_fcp_srr_error would prevent fc_exch.c from seeing
1713 	 * an abort response though.
1714 	 */
1715 	if (fh->fh_type == FC_TYPE_BLS) {
1716 		fc_fcp_unlock_pkt(fsp);
1717 		return;
1718 	}
1719 
1720 	switch (fc_frame_payload_op(fp)) {
1721 	case ELS_LS_ACC:
1722 		fsp->recov_retry = 0;
1723 		fc_fcp_timer_set(fsp, get_fsp_rec_tov(fsp));
1724 		break;
1725 	case ELS_LS_RJT:
1726 	default:
1727 		fc_fcp_recovery(fsp, FC_ERROR);
1728 		break;
1729 	}
1730 	fc_fcp_unlock_pkt(fsp);
1731 out:
1732 	fsp->lp->tt.exch_done(seq);
1733 	fc_frame_free(fp);
1734 }
1735 
1736 /**
1737  * fc_fcp_srr_error() - Handler for SRR errors
1738  * @fsp: The FCP packet that the SRR error is on
1739  * @fp:	 The SRR frame
1740  */
fc_fcp_srr_error(struct fc_fcp_pkt * fsp,struct fc_frame * fp)1741 static void fc_fcp_srr_error(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
1742 {
1743 	if (fc_fcp_lock_pkt(fsp))
1744 		goto out;
1745 	switch (PTR_ERR(fp)) {
1746 	case -FC_EX_TIMEOUT:
1747 		if (fsp->recov_retry++ < FC_MAX_RECOV_RETRY)
1748 			fc_fcp_rec(fsp);
1749 		else
1750 			fc_fcp_recovery(fsp, FC_TIMED_OUT);
1751 		break;
1752 	case -FC_EX_CLOSED:			/* e.g., link failure */
1753 		/* fall through */
1754 	default:
1755 		fc_fcp_retry_cmd(fsp);
1756 		break;
1757 	}
1758 	fc_fcp_unlock_pkt(fsp);
1759 out:
1760 	fsp->lp->tt.exch_done(fsp->recov_seq);
1761 }
1762 
1763 /**
1764  * fc_fcp_lport_queue_ready() - Determine if the lport and it's queue is ready
1765  * @lport: The local port to be checked
1766  */
fc_fcp_lport_queue_ready(struct fc_lport * lport)1767 static inline int fc_fcp_lport_queue_ready(struct fc_lport *lport)
1768 {
1769 	/* lock ? */
1770 	return (lport->state == LPORT_ST_READY) &&
1771 		lport->link_up && !lport->qfull;
1772 }
1773 
1774 /**
1775  * fc_queuecommand() - The queuecommand function of the SCSI template
1776  * @shost: The Scsi_Host that the command was issued to
1777  * @cmd:   The scsi_cmnd to be executed
1778  *
1779  * This is the i/o strategy routine, called by the SCSI layer.
1780  */
fc_queuecommand(struct Scsi_Host * shost,struct scsi_cmnd * sc_cmd)1781 int fc_queuecommand(struct Scsi_Host *shost, struct scsi_cmnd *sc_cmd)
1782 {
1783 	struct fc_lport *lport = shost_priv(shost);
1784 	struct fc_rport *rport = starget_to_rport(scsi_target(sc_cmd->device));
1785 	struct fc_fcp_pkt *fsp;
1786 	struct fc_rport_libfc_priv *rpriv;
1787 	int rval;
1788 	int rc = 0;
1789 	struct fcoe_dev_stats *stats;
1790 
1791 	rval = fc_remote_port_chkready(rport);
1792 	if (rval) {
1793 		sc_cmd->result = rval;
1794 		sc_cmd->scsi_done(sc_cmd);
1795 		return 0;
1796 	}
1797 
1798 	if (!*(struct fc_remote_port **)rport->dd_data) {
1799 		/*
1800 		 * rport is transitioning from blocked/deleted to
1801 		 * online
1802 		 */
1803 		sc_cmd->result = DID_IMM_RETRY << 16;
1804 		sc_cmd->scsi_done(sc_cmd);
1805 		goto out;
1806 	}
1807 
1808 	rpriv = rport->dd_data;
1809 
1810 	if (!fc_fcp_lport_queue_ready(lport)) {
1811 		if (lport->qfull)
1812 			fc_fcp_can_queue_ramp_down(lport);
1813 		rc = SCSI_MLQUEUE_HOST_BUSY;
1814 		goto out;
1815 	}
1816 
1817 	fsp = fc_fcp_pkt_alloc(lport, GFP_ATOMIC);
1818 	if (fsp == NULL) {
1819 		rc = SCSI_MLQUEUE_HOST_BUSY;
1820 		goto out;
1821 	}
1822 
1823 	/*
1824 	 * build the libfc request pkt
1825 	 */
1826 	fsp->cmd = sc_cmd;	/* save the cmd */
1827 	fsp->rport = rport;	/* set the remote port ptr */
1828 
1829 	/*
1830 	 * set up the transfer length
1831 	 */
1832 	fsp->data_len = scsi_bufflen(sc_cmd);
1833 	fsp->xfer_len = 0;
1834 
1835 	/*
1836 	 * setup the data direction
1837 	 */
1838 	stats = per_cpu_ptr(lport->dev_stats, get_cpu());
1839 	if (sc_cmd->sc_data_direction == DMA_FROM_DEVICE) {
1840 		fsp->req_flags = FC_SRB_READ;
1841 		stats->InputRequests++;
1842 		stats->InputBytes += fsp->data_len;
1843 	} else if (sc_cmd->sc_data_direction == DMA_TO_DEVICE) {
1844 		fsp->req_flags = FC_SRB_WRITE;
1845 		stats->OutputRequests++;
1846 		stats->OutputBytes += fsp->data_len;
1847 	} else {
1848 		fsp->req_flags = 0;
1849 		stats->ControlRequests++;
1850 	}
1851 	put_cpu();
1852 
1853 	/*
1854 	 * send it to the lower layer
1855 	 * if we get -1 return then put the request in the pending
1856 	 * queue.
1857 	 */
1858 	rval = fc_fcp_pkt_send(lport, fsp);
1859 	if (rval != 0) {
1860 		fsp->state = FC_SRB_FREE;
1861 		fc_fcp_pkt_release(fsp);
1862 		rc = SCSI_MLQUEUE_HOST_BUSY;
1863 	}
1864 out:
1865 	return rc;
1866 }
1867 EXPORT_SYMBOL(fc_queuecommand);
1868 
1869 /**
1870  * fc_io_compl() - Handle responses for completed commands
1871  * @fsp: The FCP packet that is complete
1872  *
1873  * Translates fcp_pkt errors to a Linux SCSI errors.
1874  * The fcp packet lock must be held when calling.
1875  */
fc_io_compl(struct fc_fcp_pkt * fsp)1876 static void fc_io_compl(struct fc_fcp_pkt *fsp)
1877 {
1878 	struct fc_fcp_internal *si;
1879 	struct scsi_cmnd *sc_cmd;
1880 	struct fc_lport *lport;
1881 	unsigned long flags;
1882 
1883 	/* release outstanding ddp context */
1884 	fc_fcp_ddp_done(fsp);
1885 
1886 	fsp->state |= FC_SRB_COMPL;
1887 	if (!(fsp->state & FC_SRB_FCP_PROCESSING_TMO)) {
1888 		spin_unlock_bh(&fsp->scsi_pkt_lock);
1889 		del_timer_sync(&fsp->timer);
1890 		spin_lock_bh(&fsp->scsi_pkt_lock);
1891 	}
1892 
1893 	lport = fsp->lp;
1894 	si = fc_get_scsi_internal(lport);
1895 
1896 	/*
1897 	 * if can_queue ramp down is done then try can_queue ramp up
1898 	 * since commands are completing now.
1899 	 */
1900 	if (si->last_can_queue_ramp_down_time)
1901 		fc_fcp_can_queue_ramp_up(lport);
1902 
1903 	sc_cmd = fsp->cmd;
1904 	CMD_SCSI_STATUS(sc_cmd) = fsp->cdb_status;
1905 	switch (fsp->status_code) {
1906 	case FC_COMPLETE:
1907 		if (fsp->cdb_status == 0) {
1908 			/*
1909 			 * good I/O status
1910 			 */
1911 			sc_cmd->result = DID_OK << 16;
1912 			if (fsp->scsi_resid)
1913 				CMD_RESID_LEN(sc_cmd) = fsp->scsi_resid;
1914 		} else {
1915 			/*
1916 			 * transport level I/O was ok but scsi
1917 			 * has non zero status
1918 			 */
1919 			sc_cmd->result = (DID_OK << 16) | fsp->cdb_status;
1920 		}
1921 		break;
1922 	case FC_ERROR:
1923 		FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml "
1924 			   "due to FC_ERROR\n");
1925 		sc_cmd->result = DID_ERROR << 16;
1926 		break;
1927 	case FC_DATA_UNDRUN:
1928 		if ((fsp->cdb_status == 0) && !(fsp->req_flags & FC_SRB_READ)) {
1929 			/*
1930 			 * scsi status is good but transport level
1931 			 * underrun.
1932 			 */
1933 			if (fsp->state & FC_SRB_RCV_STATUS) {
1934 				sc_cmd->result = DID_OK << 16;
1935 			} else {
1936 				FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml"
1937 					   " due to FC_DATA_UNDRUN (trans)\n");
1938 				sc_cmd->result = DID_ERROR << 16;
1939 			}
1940 		} else {
1941 			/*
1942 			 * scsi got underrun, this is an error
1943 			 */
1944 			FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml "
1945 				   "due to FC_DATA_UNDRUN (scsi)\n");
1946 			CMD_RESID_LEN(sc_cmd) = fsp->scsi_resid;
1947 			sc_cmd->result = (DID_ERROR << 16) | fsp->cdb_status;
1948 		}
1949 		break;
1950 	case FC_DATA_OVRRUN:
1951 		/*
1952 		 * overrun is an error
1953 		 */
1954 		FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml "
1955 			   "due to FC_DATA_OVRRUN\n");
1956 		sc_cmd->result = (DID_ERROR << 16) | fsp->cdb_status;
1957 		break;
1958 	case FC_CMD_ABORTED:
1959 		FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml "
1960 			  "due to FC_CMD_ABORTED\n");
1961 		sc_cmd->result = (DID_ERROR << 16) | fsp->io_status;
1962 		break;
1963 	case FC_CMD_RESET:
1964 		FC_FCP_DBG(fsp, "Returning DID_RESET to scsi-ml "
1965 			   "due to FC_CMD_RESET\n");
1966 		sc_cmd->result = (DID_RESET << 16);
1967 		break;
1968 	case FC_HRD_ERROR:
1969 		FC_FCP_DBG(fsp, "Returning DID_NO_CONNECT to scsi-ml "
1970 			   "due to FC_HRD_ERROR\n");
1971 		sc_cmd->result = (DID_NO_CONNECT << 16);
1972 		break;
1973 	case FC_CRC_ERROR:
1974 		FC_FCP_DBG(fsp, "Returning DID_PARITY to scsi-ml "
1975 			   "due to FC_CRC_ERROR\n");
1976 		sc_cmd->result = (DID_PARITY << 16);
1977 		break;
1978 	case FC_TIMED_OUT:
1979 		FC_FCP_DBG(fsp, "Returning DID_BUS_BUSY to scsi-ml "
1980 			   "due to FC_TIMED_OUT\n");
1981 		sc_cmd->result = (DID_BUS_BUSY << 16) | fsp->io_status;
1982 		break;
1983 	default:
1984 		FC_FCP_DBG(fsp, "Returning DID_ERROR to scsi-ml "
1985 			   "due to unknown error\n");
1986 		sc_cmd->result = (DID_ERROR << 16);
1987 		break;
1988 	}
1989 
1990 	if (lport->state != LPORT_ST_READY && fsp->status_code != FC_COMPLETE)
1991 		sc_cmd->result = (DID_TRANSPORT_DISRUPTED << 16);
1992 
1993 	spin_lock_irqsave(&si->scsi_queue_lock, flags);
1994 	list_del(&fsp->list);
1995 	sc_cmd->SCp.ptr = NULL;
1996 	spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
1997 	sc_cmd->scsi_done(sc_cmd);
1998 
1999 	/* release ref from initial allocation in queue command */
2000 	fc_fcp_pkt_release(fsp);
2001 }
2002 
2003 /**
2004  * fc_eh_abort() - Abort a command
2005  * @sc_cmd: The SCSI command to abort
2006  *
2007  * From SCSI host template.
2008  * Send an ABTS to the target device and wait for the response.
2009  */
fc_eh_abort(struct scsi_cmnd * sc_cmd)2010 int fc_eh_abort(struct scsi_cmnd *sc_cmd)
2011 {
2012 	struct fc_fcp_pkt *fsp;
2013 	struct fc_lport *lport;
2014 	struct fc_fcp_internal *si;
2015 	int rc = FAILED;
2016 	unsigned long flags;
2017 	int rval;
2018 
2019 	rval = fc_block_scsi_eh(sc_cmd);
2020 	if (rval)
2021 		return rval;
2022 
2023 	lport = shost_priv(sc_cmd->device->host);
2024 	if (lport->state != LPORT_ST_READY)
2025 		return rc;
2026 	else if (!lport->link_up)
2027 		return rc;
2028 
2029 	si = fc_get_scsi_internal(lport);
2030 	spin_lock_irqsave(&si->scsi_queue_lock, flags);
2031 	fsp = CMD_SP(sc_cmd);
2032 	if (!fsp) {
2033 		/* command completed while scsi eh was setting up */
2034 		spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
2035 		return SUCCESS;
2036 	}
2037 	/* grab a ref so the fsp and sc_cmd cannot be relased from under us */
2038 	fc_fcp_pkt_hold(fsp);
2039 	spin_unlock_irqrestore(&si->scsi_queue_lock, flags);
2040 
2041 	if (fc_fcp_lock_pkt(fsp)) {
2042 		/* completed while we were waiting for timer to be deleted */
2043 		rc = SUCCESS;
2044 		goto release_pkt;
2045 	}
2046 
2047 	rc = fc_fcp_pkt_abort(fsp);
2048 	fc_fcp_unlock_pkt(fsp);
2049 
2050 release_pkt:
2051 	fc_fcp_pkt_release(fsp);
2052 	return rc;
2053 }
2054 EXPORT_SYMBOL(fc_eh_abort);
2055 
2056 /**
2057  * fc_eh_device_reset() - Reset a single LUN
2058  * @sc_cmd: The SCSI command which identifies the device whose
2059  *	    LUN is to be reset
2060  *
2061  * Set from SCSI host template.
2062  */
fc_eh_device_reset(struct scsi_cmnd * sc_cmd)2063 int fc_eh_device_reset(struct scsi_cmnd *sc_cmd)
2064 {
2065 	struct fc_lport *lport;
2066 	struct fc_fcp_pkt *fsp;
2067 	struct fc_rport *rport = starget_to_rport(scsi_target(sc_cmd->device));
2068 	int rc = FAILED;
2069 	int rval;
2070 
2071 	rval = fc_block_scsi_eh(sc_cmd);
2072 	if (rval)
2073 		return rval;
2074 
2075 	lport = shost_priv(sc_cmd->device->host);
2076 
2077 	if (lport->state != LPORT_ST_READY)
2078 		return rc;
2079 
2080 	FC_SCSI_DBG(lport, "Resetting rport (%6.6x)\n", rport->port_id);
2081 
2082 	fsp = fc_fcp_pkt_alloc(lport, GFP_NOIO);
2083 	if (fsp == NULL) {
2084 		printk(KERN_WARNING "libfc: could not allocate scsi_pkt\n");
2085 		goto out;
2086 	}
2087 
2088 	/*
2089 	 * Build the libfc request pkt. Do not set the scsi cmnd, because
2090 	 * the sc passed in is not setup for execution like when sent
2091 	 * through the queuecommand callout.
2092 	 */
2093 	fsp->rport = rport;	/* set the remote port ptr */
2094 
2095 	/*
2096 	 * flush outstanding commands
2097 	 */
2098 	rc = fc_lun_reset(lport, fsp, scmd_id(sc_cmd), sc_cmd->device->lun);
2099 	fsp->state = FC_SRB_FREE;
2100 	fc_fcp_pkt_release(fsp);
2101 
2102 out:
2103 	return rc;
2104 }
2105 EXPORT_SYMBOL(fc_eh_device_reset);
2106 
2107 /**
2108  * fc_eh_host_reset() - Reset a Scsi_Host.
2109  * @sc_cmd: The SCSI command that identifies the SCSI host to be reset
2110  */
fc_eh_host_reset(struct scsi_cmnd * sc_cmd)2111 int fc_eh_host_reset(struct scsi_cmnd *sc_cmd)
2112 {
2113 	struct Scsi_Host *shost = sc_cmd->device->host;
2114 	struct fc_lport *lport = shost_priv(shost);
2115 	unsigned long wait_tmo;
2116 
2117 	FC_SCSI_DBG(lport, "Resetting host\n");
2118 
2119 	fc_block_scsi_eh(sc_cmd);
2120 
2121 	lport->tt.lport_reset(lport);
2122 	wait_tmo = jiffies + FC_HOST_RESET_TIMEOUT;
2123 	while (!fc_fcp_lport_queue_ready(lport) && time_before(jiffies,
2124 							       wait_tmo))
2125 		msleep(1000);
2126 
2127 	if (fc_fcp_lport_queue_ready(lport)) {
2128 		shost_printk(KERN_INFO, shost, "libfc: Host reset succeeded "
2129 			     "on port (%6.6x)\n", lport->port_id);
2130 		return SUCCESS;
2131 	} else {
2132 		shost_printk(KERN_INFO, shost, "libfc: Host reset failed, "
2133 			     "port (%6.6x) is not ready.\n",
2134 			     lport->port_id);
2135 		return FAILED;
2136 	}
2137 }
2138 EXPORT_SYMBOL(fc_eh_host_reset);
2139 
2140 /**
2141  * fc_slave_alloc() - Configure the queue depth of a Scsi_Host
2142  * @sdev: The SCSI device that identifies the SCSI host
2143  *
2144  * Configures queue depth based on host's cmd_per_len. If not set
2145  * then we use the libfc default.
2146  */
fc_slave_alloc(struct scsi_device * sdev)2147 int fc_slave_alloc(struct scsi_device *sdev)
2148 {
2149 	struct fc_rport *rport = starget_to_rport(scsi_target(sdev));
2150 
2151 	if (!rport || fc_remote_port_chkready(rport))
2152 		return -ENXIO;
2153 
2154 	if (sdev->tagged_supported)
2155 		scsi_activate_tcq(sdev, FC_FCP_DFLT_QUEUE_DEPTH);
2156 	else
2157 		scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev),
2158 					FC_FCP_DFLT_QUEUE_DEPTH);
2159 
2160 	return 0;
2161 }
2162 EXPORT_SYMBOL(fc_slave_alloc);
2163 
2164 /**
2165  * fc_change_queue_depth() - Change a device's queue depth
2166  * @sdev:   The SCSI device whose queue depth is to change
2167  * @qdepth: The new queue depth
2168  * @reason: The resason for the change
2169  */
fc_change_queue_depth(struct scsi_device * sdev,int qdepth,int reason)2170 int fc_change_queue_depth(struct scsi_device *sdev, int qdepth, int reason)
2171 {
2172 	switch (reason) {
2173 	case SCSI_QDEPTH_DEFAULT:
2174 		scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), qdepth);
2175 		break;
2176 	case SCSI_QDEPTH_QFULL:
2177 		scsi_track_queue_full(sdev, qdepth);
2178 		break;
2179 	case SCSI_QDEPTH_RAMP_UP:
2180 		scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), qdepth);
2181 		break;
2182 	default:
2183 		return -EOPNOTSUPP;
2184 	}
2185 	return sdev->queue_depth;
2186 }
2187 EXPORT_SYMBOL(fc_change_queue_depth);
2188 
2189 /**
2190  * fc_change_queue_type() - Change a device's queue type
2191  * @sdev:     The SCSI device whose queue depth is to change
2192  * @tag_type: Identifier for queue type
2193  */
fc_change_queue_type(struct scsi_device * sdev,int tag_type)2194 int fc_change_queue_type(struct scsi_device *sdev, int tag_type)
2195 {
2196 	if (sdev->tagged_supported) {
2197 		scsi_set_tag_type(sdev, tag_type);
2198 		if (tag_type)
2199 			scsi_activate_tcq(sdev, sdev->queue_depth);
2200 		else
2201 			scsi_deactivate_tcq(sdev, sdev->queue_depth);
2202 	} else
2203 		tag_type = 0;
2204 
2205 	return tag_type;
2206 }
2207 EXPORT_SYMBOL(fc_change_queue_type);
2208 
2209 /**
2210  * fc_fcp_destory() - Tear down the FCP layer for a given local port
2211  * @lport: The local port that no longer needs the FCP layer
2212  */
fc_fcp_destroy(struct fc_lport * lport)2213 void fc_fcp_destroy(struct fc_lport *lport)
2214 {
2215 	struct fc_fcp_internal *si = fc_get_scsi_internal(lport);
2216 
2217 	if (!list_empty(&si->scsi_pkt_queue))
2218 		printk(KERN_ERR "libfc: Leaked SCSI packets when destroying "
2219 		       "port (%6.6x)\n", lport->port_id);
2220 
2221 	mempool_destroy(si->scsi_pkt_pool);
2222 	kfree(si);
2223 	lport->scsi_priv = NULL;
2224 }
2225 EXPORT_SYMBOL(fc_fcp_destroy);
2226 
fc_setup_fcp(void)2227 int fc_setup_fcp(void)
2228 {
2229 	int rc = 0;
2230 
2231 	scsi_pkt_cachep = kmem_cache_create("libfc_fcp_pkt",
2232 					    sizeof(struct fc_fcp_pkt),
2233 					    0, SLAB_HWCACHE_ALIGN, NULL);
2234 	if (!scsi_pkt_cachep) {
2235 		printk(KERN_ERR "libfc: Unable to allocate SRB cache, "
2236 		       "module load failed!");
2237 		rc = -ENOMEM;
2238 	}
2239 
2240 	return rc;
2241 }
2242 
fc_destroy_fcp(void)2243 void fc_destroy_fcp(void)
2244 {
2245 	if (scsi_pkt_cachep)
2246 		kmem_cache_destroy(scsi_pkt_cachep);
2247 }
2248 
2249 /**
2250  * fc_fcp_init() - Initialize the FCP layer for a local port
2251  * @lport: The local port to initialize the exchange layer for
2252  */
fc_fcp_init(struct fc_lport * lport)2253 int fc_fcp_init(struct fc_lport *lport)
2254 {
2255 	int rc;
2256 	struct fc_fcp_internal *si;
2257 
2258 	if (!lport->tt.fcp_cmd_send)
2259 		lport->tt.fcp_cmd_send = fc_fcp_cmd_send;
2260 
2261 	if (!lport->tt.fcp_cleanup)
2262 		lport->tt.fcp_cleanup = fc_fcp_cleanup;
2263 
2264 	if (!lport->tt.fcp_abort_io)
2265 		lport->tt.fcp_abort_io = fc_fcp_abort_io;
2266 
2267 	si = kzalloc(sizeof(struct fc_fcp_internal), GFP_KERNEL);
2268 	if (!si)
2269 		return -ENOMEM;
2270 	lport->scsi_priv = si;
2271 	si->max_can_queue = lport->host->can_queue;
2272 	INIT_LIST_HEAD(&si->scsi_pkt_queue);
2273 	spin_lock_init(&si->scsi_queue_lock);
2274 
2275 	si->scsi_pkt_pool = mempool_create_slab_pool(2, scsi_pkt_cachep);
2276 	if (!si->scsi_pkt_pool) {
2277 		rc = -ENOMEM;
2278 		goto free_internal;
2279 	}
2280 	return 0;
2281 
2282 free_internal:
2283 	kfree(si);
2284 	return rc;
2285 }
2286 EXPORT_SYMBOL(fc_fcp_init);
2287