1 #ifndef __SOUND_OPL3_H
2 #define __SOUND_OPL3_H
3
4 /*
5 * Definitions of the OPL-3 registers.
6 *
7 * Copyright (c) by Jaroslav Kysela <perex@perex.cz>,
8 * Hannu Savolainen 1993-1996
9 *
10 *
11 * The OPL-3 mode is switched on by writing 0x01, to the offset 5
12 * of the right side.
13 *
14 * Another special register at the right side is at offset 4. It contains
15 * a bit mask defining which voices are used as 4 OP voices.
16 *
17 * The percussive mode is implemented in the left side only.
18 *
19 * With the above exceptions the both sides can be operated independently.
20 *
21 * A 4 OP voice can be created by setting the corresponding
22 * bit at offset 4 of the right side.
23 *
24 * For example setting the rightmost bit (0x01) changes the
25 * first voice on the right side to the 4 OP mode. The fourth
26 * voice is made inaccessible.
27 *
28 * If a voice is set to the 2 OP mode, it works like 2 OP modes
29 * of the original YM3812 (AdLib). In addition the voice can
30 * be connected the left, right or both stereo channels. It can
31 * even be left unconnected. This works with 4 OP voices also.
32 *
33 * The stereo connection bits are located in the FEEDBACK_CONNECTION
34 * register of the voice (0xC0-0xC8). In 4 OP voices these bits are
35 * in the second half of the voice.
36 *
37 *
38 * This program is free software; you can redistribute it and/or modify
39 * it under the terms of the GNU General Public License as published by
40 * the Free Software Foundation; either version 2 of the License, or
41 * (at your option) any later version.
42 *
43 * This program is distributed in the hope that it will be useful,
44 * but WITHOUT ANY WARRANTY; without even the implied warranty of
45 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
46 * GNU General Public License for more details.
47 *
48 * You should have received a copy of the GNU General Public License
49 * along with this program; if not, write to the Free Software
50 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
51 *
52 */
53
54 #include <sound/core.h>
55 #include <sound/hwdep.h>
56 #include <sound/timer.h>
57 #include <sound/seq_midi_emul.h>
58 #ifdef CONFIG_SND_SEQUENCER_OSS
59 #include <sound/seq_oss.h>
60 #include <sound/seq_oss_legacy.h>
61 #endif
62 #include <sound/seq_device.h>
63 #include <sound/asound_fm.h>
64
65 /*
66 * Register numbers for the global registers
67 */
68
69 #define OPL3_REG_TEST 0x01
70 #define OPL3_ENABLE_WAVE_SELECT 0x20
71
72 #define OPL3_REG_TIMER1 0x02
73 #define OPL3_REG_TIMER2 0x03
74 #define OPL3_REG_TIMER_CONTROL 0x04 /* Left side */
75 #define OPL3_IRQ_RESET 0x80
76 #define OPL3_TIMER1_MASK 0x40
77 #define OPL3_TIMER2_MASK 0x20
78 #define OPL3_TIMER1_START 0x01
79 #define OPL3_TIMER2_START 0x02
80
81 #define OPL3_REG_CONNECTION_SELECT 0x04 /* Right side */
82 #define OPL3_LEFT_4OP_0 0x01
83 #define OPL3_LEFT_4OP_1 0x02
84 #define OPL3_LEFT_4OP_2 0x04
85 #define OPL3_RIGHT_4OP_0 0x08
86 #define OPL3_RIGHT_4OP_1 0x10
87 #define OPL3_RIGHT_4OP_2 0x20
88
89 #define OPL3_REG_MODE 0x05 /* Right side */
90 #define OPL3_OPL3_ENABLE 0x01 /* OPL3 mode */
91 #define OPL3_OPL4_ENABLE 0x02 /* OPL4 mode */
92
93 #define OPL3_REG_KBD_SPLIT 0x08 /* Left side */
94 #define OPL3_COMPOSITE_SINE_WAVE_MODE 0x80 /* Don't use with OPL-3? */
95 #define OPL3_KEYBOARD_SPLIT 0x40
96
97 #define OPL3_REG_PERCUSSION 0xbd /* Left side only */
98 #define OPL3_TREMOLO_DEPTH 0x80
99 #define OPL3_VIBRATO_DEPTH 0x40
100 #define OPL3_PERCUSSION_ENABLE 0x20
101 #define OPL3_BASSDRUM_ON 0x10
102 #define OPL3_SNAREDRUM_ON 0x08
103 #define OPL3_TOMTOM_ON 0x04
104 #define OPL3_CYMBAL_ON 0x02
105 #define OPL3_HIHAT_ON 0x01
106
107 /*
108 * Offsets to the register banks for operators. To get the
109 * register number just add the operator offset to the bank offset
110 *
111 * AM/VIB/EG/KSR/Multiple (0x20 to 0x35)
112 */
113 #define OPL3_REG_AM_VIB 0x20
114 #define OPL3_TREMOLO_ON 0x80
115 #define OPL3_VIBRATO_ON 0x40
116 #define OPL3_SUSTAIN_ON 0x20
117 #define OPL3_KSR 0x10 /* Key scaling rate */
118 #define OPL3_MULTIPLE_MASK 0x0f /* Frequency multiplier */
119
120 /*
121 * KSL/Total level (0x40 to 0x55)
122 */
123 #define OPL3_REG_KSL_LEVEL 0x40
124 #define OPL3_KSL_MASK 0xc0 /* Envelope scaling bits */
125 #define OPL3_TOTAL_LEVEL_MASK 0x3f /* Strength (volume) of OP */
126
127 /*
128 * Attack / Decay rate (0x60 to 0x75)
129 */
130 #define OPL3_REG_ATTACK_DECAY 0x60
131 #define OPL3_ATTACK_MASK 0xf0
132 #define OPL3_DECAY_MASK 0x0f
133
134 /*
135 * Sustain level / Release rate (0x80 to 0x95)
136 */
137 #define OPL3_REG_SUSTAIN_RELEASE 0x80
138 #define OPL3_SUSTAIN_MASK 0xf0
139 #define OPL3_RELEASE_MASK 0x0f
140
141 /*
142 * Wave select (0xE0 to 0xF5)
143 */
144 #define OPL3_REG_WAVE_SELECT 0xe0
145 #define OPL3_WAVE_SELECT_MASK 0x07
146
147 /*
148 * Offsets to the register banks for voices. Just add to the
149 * voice number to get the register number.
150 *
151 * F-Number low bits (0xA0 to 0xA8).
152 */
153 #define OPL3_REG_FNUM_LOW 0xa0
154
155 /*
156 * F-number high bits / Key on / Block (octave) (0xB0 to 0xB8)
157 */
158 #define OPL3_REG_KEYON_BLOCK 0xb0
159 #define OPL3_KEYON_BIT 0x20
160 #define OPL3_BLOCKNUM_MASK 0x1c
161 #define OPL3_FNUM_HIGH_MASK 0x03
162
163 /*
164 * Feedback / Connection (0xc0 to 0xc8)
165 *
166 * These registers have two new bits when the OPL-3 mode
167 * is selected. These bits controls connecting the voice
168 * to the stereo channels. For 4 OP voices this bit is
169 * defined in the second half of the voice (add 3 to the
170 * register offset).
171 *
172 * For 4 OP voices the connection bit is used in the
173 * both halves (gives 4 ways to connect the operators).
174 */
175 #define OPL3_REG_FEEDBACK_CONNECTION 0xc0
176 #define OPL3_FEEDBACK_MASK 0x0e /* Valid just for 1st OP of a voice */
177 #define OPL3_CONNECTION_BIT 0x01
178 /*
179 * In the 4 OP mode there is four possible configurations how the
180 * operators can be connected together (in 2 OP modes there is just
181 * AM or FM). The 4 OP connection mode is defined by the rightmost
182 * bit of the FEEDBACK_CONNECTION (0xC0-0xC8) on the both halves.
183 *
184 * First half Second half Mode
185 *
186 * +---+
187 * v |
188 * 0 0 >+-1-+--2--3--4-->
189 *
190 *
191 *
192 * +---+
193 * | |
194 * 0 1 >+-1-+--2-+
195 * |->
196 * >--3----4-+
197 *
198 * +---+
199 * | |
200 * 1 0 >+-1-+-----+
201 * |->
202 * >--2--3--4-+
203 *
204 * +---+
205 * | |
206 * 1 1 >+-1-+--+
207 * |
208 * >--2--3-+->
209 * |
210 * >--4----+
211 */
212 #define OPL3_STEREO_BITS 0x30 /* OPL-3 only */
213 #define OPL3_VOICE_TO_LEFT 0x10
214 #define OPL3_VOICE_TO_RIGHT 0x20
215
216 /*
217
218 */
219
220 #define OPL3_LEFT 0x0000
221 #define OPL3_RIGHT 0x0100
222
223 #define OPL3_HW_AUTO 0x0000
224 #define OPL3_HW_OPL2 0x0200
225 #define OPL3_HW_OPL3 0x0300
226 #define OPL3_HW_OPL3_SV 0x0301 /* S3 SonicVibes */
227 #define OPL3_HW_OPL3_CS 0x0302 /* CS4232/CS4236+ */
228 #define OPL3_HW_OPL3_FM801 0x0303 /* FM801 */
229 #define OPL3_HW_OPL3_CS4281 0x0304 /* CS4281 */
230 #define OPL3_HW_OPL4 0x0400 /* YMF278B/YMF295 */
231 #define OPL3_HW_OPL4_ML 0x0401 /* YMF704/YMF721 */
232 #define OPL3_HW_MASK 0xff00
233
234 #define MAX_OPL2_VOICES 9
235 #define MAX_OPL3_VOICES 18
236
237 struct snd_opl3;
238
239 /*
240 * Instrument record, aka "Patch"
241 */
242
243 /* FM operator */
244 struct fm_operator {
245 unsigned char am_vib;
246 unsigned char ksl_level;
247 unsigned char attack_decay;
248 unsigned char sustain_release;
249 unsigned char wave_select;
250 } __attribute__((packed));
251
252 /* Instrument data */
253 struct fm_instrument {
254 struct fm_operator op[4];
255 unsigned char feedback_connection[2];
256 unsigned char echo_delay;
257 unsigned char echo_atten;
258 unsigned char chorus_spread;
259 unsigned char trnsps;
260 unsigned char fix_dur;
261 unsigned char modes;
262 unsigned char fix_key;
263 };
264
265 /* type */
266 #define FM_PATCH_OPL2 0x01 /* OPL2 2 operators FM instrument */
267 #define FM_PATCH_OPL3 0x02 /* OPL3 4 operators FM instrument */
268
269 /* Instrument record */
270 struct fm_patch {
271 unsigned char prog;
272 unsigned char bank;
273 unsigned char type;
274 struct fm_instrument inst;
275 char name[24];
276 struct fm_patch *next;
277 };
278
279
280 /*
281 * A structure to keep track of each hardware voice
282 */
283 struct snd_opl3_voice {
284 int state; /* status */
285 #define SNDRV_OPL3_ST_OFF 0 /* Not playing */
286 #define SNDRV_OPL3_ST_ON_2OP 1 /* 2op voice is allocated */
287 #define SNDRV_OPL3_ST_ON_4OP 2 /* 4op voice is allocated */
288 #define SNDRV_OPL3_ST_NOT_AVAIL -1 /* voice is not available */
289
290 unsigned int time; /* An allocation time */
291 unsigned char note; /* Note currently assigned to this voice */
292
293 unsigned long note_off; /* note-off time */
294 int note_off_check; /* check note-off time */
295
296 unsigned char keyon_reg; /* KON register shadow */
297
298 struct snd_midi_channel *chan; /* Midi channel for this note */
299 };
300
301 struct snd_opl3 {
302 unsigned long l_port;
303 unsigned long r_port;
304 struct resource *res_l_port;
305 struct resource *res_r_port;
306 unsigned short hardware;
307 /* hardware access */
308 void (*command) (struct snd_opl3 * opl3, unsigned short cmd, unsigned char val);
309 unsigned short timer_enable;
310 int seq_dev_num; /* sequencer device number */
311 struct snd_timer *timer1;
312 struct snd_timer *timer2;
313 spinlock_t timer_lock;
314
315 void *private_data;
316 void (*private_free)(struct snd_opl3 *);
317
318 struct snd_hwdep *hwdep;
319 spinlock_t reg_lock;
320 struct snd_card *card; /* The card that this belongs to */
321 unsigned char fm_mode; /* OPL mode, see SNDRV_DM_FM_MODE_XXX */
322 unsigned char rhythm; /* percussion mode flag */
323 unsigned char max_voices; /* max number of voices */
324 #if defined(CONFIG_SND_SEQUENCER) || defined(CONFIG_SND_SEQUENCER_MODULE)
325 #define SNDRV_OPL3_MODE_SYNTH 0 /* OSS - voices allocated by application */
326 #define SNDRV_OPL3_MODE_SEQ 1 /* ALSA - driver handles voice allocation */
327 int synth_mode; /* synth mode */
328 int seq_client;
329
330 struct snd_seq_device *seq_dev; /* sequencer device */
331 struct snd_midi_channel_set * chset;
332
333 #ifdef CONFIG_SND_SEQUENCER_OSS
334 struct snd_seq_device *oss_seq_dev; /* OSS sequencer device */
335 struct snd_midi_channel_set * oss_chset;
336 #endif
337
338 #define OPL3_PATCH_HASH_SIZE 32
339 struct fm_patch *patch_table[OPL3_PATCH_HASH_SIZE];
340
341 struct snd_opl3_voice voices[MAX_OPL3_VOICES]; /* Voices (OPL3 'channel') */
342 int use_time; /* allocation counter */
343
344 unsigned short connection_reg; /* connection reg shadow */
345 unsigned char drum_reg; /* percussion reg shadow */
346
347 spinlock_t voice_lock; /* Lock for voice access */
348
349 struct timer_list tlist; /* timer for note-offs and effects */
350 int sys_timer_status; /* system timer run status */
351 spinlock_t sys_timer_lock; /* Lock for system timer access */
352 #endif
353 };
354
355 /* opl3.c */
356 void snd_opl3_interrupt(struct snd_hwdep * hw);
357 int snd_opl3_new(struct snd_card *card, unsigned short hardware,
358 struct snd_opl3 **ropl3);
359 int snd_opl3_init(struct snd_opl3 *opl3);
360 int snd_opl3_create(struct snd_card *card,
361 unsigned long l_port, unsigned long r_port,
362 unsigned short hardware,
363 int integrated,
364 struct snd_opl3 ** opl3);
365 int snd_opl3_timer_new(struct snd_opl3 * opl3, int timer1_dev, int timer2_dev);
366 int snd_opl3_hwdep_new(struct snd_opl3 * opl3, int device, int seq_device,
367 struct snd_hwdep ** rhwdep);
368
369 /* opl3_synth */
370 int snd_opl3_open(struct snd_hwdep * hw, struct file *file);
371 int snd_opl3_ioctl(struct snd_hwdep * hw, struct file *file,
372 unsigned int cmd, unsigned long arg);
373 int snd_opl3_release(struct snd_hwdep * hw, struct file *file);
374
375 void snd_opl3_reset(struct snd_opl3 * opl3);
376
377 #if defined(CONFIG_SND_SEQUENCER) || defined(CONFIG_SND_SEQUENCER_MODULE)
378 long snd_opl3_write(struct snd_hwdep *hw, const char __user *buf, long count,
379 loff_t *offset);
380 int snd_opl3_load_patch(struct snd_opl3 *opl3,
381 int prog, int bank, int type,
382 const char *name,
383 const unsigned char *ext,
384 const unsigned char *data);
385 struct fm_patch *snd_opl3_find_patch(struct snd_opl3 *opl3, int prog, int bank,
386 int create_patch);
387 void snd_opl3_clear_patches(struct snd_opl3 *opl3);
388 #else
389 #define snd_opl3_write NULL
snd_opl3_clear_patches(struct snd_opl3 * opl3)390 static inline void snd_opl3_clear_patches(struct snd_opl3 *opl3) {}
391 #endif
392
393 #endif /* __SOUND_OPL3_H */
394