Lines Matching refs:radio
11 Say Y here to enable selecting AM/FM radio adapters.
22 source "drivers/media/radio/si470x/Kconfig"
28 source "drivers/media/radio/si4713/Kconfig"
37 Choose Y here if you have this FM radio chip.
39 In order to control your radio card, you will need to use programs
45 module will be called radio-si476x.
48 tristate "AverMedia MR 800 USB FM radio support"
51 Say Y here if you want to connect this type of radio to your
57 module will be called radio-mr800.
60 tristate "D-Link/GemTek USB FM radio support"
63 Say Y here if you want to connect this type of radio to your
72 tristate "Guillemot MAXI Radio FM 2000 radio"
76 Choose Y here if you have this radio card. This card may also be
79 In order to control your radio card, you will need to use programs
85 module will be called radio-maxiradio.
88 tristate "Griffin radioSHARK USB radio receiver"
92 Choose Y here if you have this radio receiver.
97 In order to control your radio card, you will need to use programs
103 module will be called radio-shark.
106 tristate "Griffin radioSHARK2 USB radio receiver"
109 Choose Y here if you have this radio receiver.
114 In order to control your radio card, you will need to use programs
120 module will be called radio-shark2.
130 module will be called radio-keene.
133 tristate "Thanko's Raremono AM/FM/SW radio support"
137 It is one of the very few or perhaps the only consumer USB radio device
144 module will be called radio-raremono.
147 tristate "Masterkit MA901 USB FM radio support"
150 Say Y here if you want to connect this type of radio to your
156 module will be called radio-ma901.
159 tristate "TEA5764 I2C FM radio support"
167 module will be called radio-tea5764.
181 Say Y here if you want to use the SAA7706H Car radio Digital
202 tristate "Enable the Timberdale radio driver"
219 Choose Y here if you have this FM radio chip.
221 In order to control your radio card, you will need to use programs
227 module will be called radio-wl1273.
229 # TI's ST based wl128x FM radio
230 source "drivers/media/radio/wl128x/Kconfig"
237 bool "ISA radio devices"
253 Choose Y here if you have one of these AM/FM radio cards, and then
257 module will be called radio-cadet.
264 Choose Y here if you have one of these FM radio cards, and then fill
271 If you have a GemTeks combined (PnP) sound- and radio card you must
280 module will be called radio-aimslab.
295 Choose Y here if you have this FM radio card, and then fill in the
303 module will be called radio-rtrack2.
318 Choose Y here if you have one of these FM radio cards, and then fill
322 module will be called radio-aztech.
338 Choose Y here if you have this FM radio card, and then fill in the
347 module will be called radio-gemtek.
374 tristate "miroSOUND PCM20 radio"
379 Choose Y here if you have this FM radio card. You also need to enable
382 is required for the radio-miropcm20.
385 module will be called radio-miropcm20.
391 Choose Y here if you have one of these FM radio cards.
394 module will be called radio-sf16fmi.
401 Choose Y here if you have one of these FM radio cards.
404 module will be called radio-sf16fmr2.
411 Choose Y here if you have this FM radio card.
418 module will be called radio-terratec.
421 tristate "Trust FM radio card"
425 This is a driver for the Trust FM radio cards. Say Y if you have
433 module will be called radio-trust.
440 Enter the I/O port of your Trust FM radio card. If unsure, try the
448 Choose Y here if you have one of these FM radio cards, and then fill
456 module will be called radio-typhoon.
463 Enter the I/O port of your Typhoon or EcoRadio radio card.
470 Enter the frequency used for muting the radio. The device is never
473 radio device is set to the frequency you can enter here whenever
474 the device is muted. There should be no local radio station at that
482 Choose Y here if you have one of these FM radio cards, and then fill
490 module will be called radio-zoltrix.
497 Enter the I/O port of your Zoltrix radio card.