Lines Matching refs:until

224 	 * wait until any select-out activity has halted, and
368 	 * new commands from the host until the MK_MESSAGE
381 	 * Defer this SCB and stop fetching new SCBs until
502 	 * until we return to our idle loop), use a
624 		 * the point of selection until our idle
628 		 * idle loop until the busfree at the end of
677 		 * the point of re-selection until our idle
681 		 * idle loop until the busfree at the end of
1421  * An ACK is not sent on input from the target until SCSIDATL is read from.
1422  * So we wait until SCSIDATL is latched (the usual way), then read the data
1426  * data byte on the bus until we send our ACK.
1555 	 * first segment in the S/G FIFO.  Wait until it is
1650 	 * Turn on `Bit Bucket' mode, wait until the target takes
1784  * call our idle loop until it is able to load
1867 		 * disabling SCSIEN until we see the first REQ from the
1983  * ack bytes until data are provided.  So, if the target begins
2004 	 * Defer handling of this NONPACKREQ until we
2008 	 * shadow is not valid, keep running this FIFO until we
2046 	 * Keep a handler around for this FIFO until it drains
2107  * Must wait until CDB xfer is over before issuing the
2163 	 * context, we must defer NONPACKREQ processing until all data
2176 	 * processing, cannot be set until the handler is finished.