1 /* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ 2 /* 3 * Performance events: 4 * 5 * Copyright (C) 2008-2009, Thomas Gleixner <tglx@linutronix.de> 6 * Copyright (C) 2008-2011, Red Hat, Inc., Ingo Molnar 7 * Copyright (C) 2008-2011, Red Hat, Inc., Peter Zijlstra 8 * 9 * Data type definitions, declarations, prototypes. 10 * 11 * Started by: Thomas Gleixner and Ingo Molnar 12 * 13 * For licencing details see kernel-base/COPYING 14 */ 15 #ifndef _UAPI_LINUX_PERF_EVENT_H 16 #define _UAPI_LINUX_PERF_EVENT_H 17 18 #include <linux/types.h> 19 #include <linux/ioctl.h> 20 #include <asm/byteorder.h> 21 22 /* 23 * User-space ABI bits: 24 */ 25 26 /* 27 * attr.type 28 */ 29 enum perf_type_id { 30 PERF_TYPE_HARDWARE = 0, 31 PERF_TYPE_SOFTWARE = 1, 32 PERF_TYPE_TRACEPOINT = 2, 33 PERF_TYPE_HW_CACHE = 3, 34 PERF_TYPE_RAW = 4, 35 PERF_TYPE_BREAKPOINT = 5, 36 37 PERF_TYPE_MAX, /* non-ABI */ 38 }; 39 40 /* 41 * Generalized performance event event_id types, used by the 42 * attr.event_id parameter of the sys_perf_event_open() 43 * syscall: 44 */ 45 enum perf_hw_id { 46 /* 47 * Common hardware events, generalized by the kernel: 48 */ 49 PERF_COUNT_HW_CPU_CYCLES = 0, 50 PERF_COUNT_HW_INSTRUCTIONS = 1, 51 PERF_COUNT_HW_CACHE_REFERENCES = 2, 52 PERF_COUNT_HW_CACHE_MISSES = 3, 53 PERF_COUNT_HW_BRANCH_INSTRUCTIONS = 4, 54 PERF_COUNT_HW_BRANCH_MISSES = 5, 55 PERF_COUNT_HW_BUS_CYCLES = 6, 56 PERF_COUNT_HW_STALLED_CYCLES_FRONTEND = 7, 57 PERF_COUNT_HW_STALLED_CYCLES_BACKEND = 8, 58 PERF_COUNT_HW_REF_CPU_CYCLES = 9, 59 60 PERF_COUNT_HW_MAX, /* non-ABI */ 61 }; 62 63 /* 64 * Generalized hardware cache events: 65 * 66 * { L1-D, L1-I, LLC, ITLB, DTLB, BPU, NODE } x 67 * { read, write, prefetch } x 68 * { accesses, misses } 69 */ 70 enum perf_hw_cache_id { 71 PERF_COUNT_HW_CACHE_L1D = 0, 72 PERF_COUNT_HW_CACHE_L1I = 1, 73 PERF_COUNT_HW_CACHE_LL = 2, 74 PERF_COUNT_HW_CACHE_DTLB = 3, 75 PERF_COUNT_HW_CACHE_ITLB = 4, 76 PERF_COUNT_HW_CACHE_BPU = 5, 77 PERF_COUNT_HW_CACHE_NODE = 6, 78 79 PERF_COUNT_HW_CACHE_MAX, /* non-ABI */ 80 }; 81 82 enum perf_hw_cache_op_id { 83 PERF_COUNT_HW_CACHE_OP_READ = 0, 84 PERF_COUNT_HW_CACHE_OP_WRITE = 1, 85 PERF_COUNT_HW_CACHE_OP_PREFETCH = 2, 86 87 PERF_COUNT_HW_CACHE_OP_MAX, /* non-ABI */ 88 }; 89 90 enum perf_hw_cache_op_result_id { 91 PERF_COUNT_HW_CACHE_RESULT_ACCESS = 0, 92 PERF_COUNT_HW_CACHE_RESULT_MISS = 1, 93 94 PERF_COUNT_HW_CACHE_RESULT_MAX, /* non-ABI */ 95 }; 96 97 /* 98 * Special "software" events provided by the kernel, even if the hardware 99 * does not support performance events. These events measure various 100 * physical and sw events of the kernel (and allow the profiling of them as 101 * well): 102 */ 103 enum perf_sw_ids { 104 PERF_COUNT_SW_CPU_CLOCK = 0, 105 PERF_COUNT_SW_TASK_CLOCK = 1, 106 PERF_COUNT_SW_PAGE_FAULTS = 2, 107 PERF_COUNT_SW_CONTEXT_SWITCHES = 3, 108 PERF_COUNT_SW_CPU_MIGRATIONS = 4, 109 PERF_COUNT_SW_PAGE_FAULTS_MIN = 5, 110 PERF_COUNT_SW_PAGE_FAULTS_MAJ = 6, 111 PERF_COUNT_SW_ALIGNMENT_FAULTS = 7, 112 PERF_COUNT_SW_EMULATION_FAULTS = 8, 113 PERF_COUNT_SW_DUMMY = 9, 114 PERF_COUNT_SW_BPF_OUTPUT = 10, 115 116 PERF_COUNT_SW_MAX, /* non-ABI */ 117 }; 118 119 /* 120 * Bits that can be set in attr.sample_type to request information 121 * in the overflow packets. 122 */ 123 enum perf_event_sample_format { 124 PERF_SAMPLE_IP = 1U << 0, 125 PERF_SAMPLE_TID = 1U << 1, 126 PERF_SAMPLE_TIME = 1U << 2, 127 PERF_SAMPLE_ADDR = 1U << 3, 128 PERF_SAMPLE_READ = 1U << 4, 129 PERF_SAMPLE_CALLCHAIN = 1U << 5, 130 PERF_SAMPLE_ID = 1U << 6, 131 PERF_SAMPLE_CPU = 1U << 7, 132 PERF_SAMPLE_PERIOD = 1U << 8, 133 PERF_SAMPLE_STREAM_ID = 1U << 9, 134 PERF_SAMPLE_RAW = 1U << 10, 135 PERF_SAMPLE_BRANCH_STACK = 1U << 11, 136 PERF_SAMPLE_REGS_USER = 1U << 12, 137 PERF_SAMPLE_STACK_USER = 1U << 13, 138 PERF_SAMPLE_WEIGHT = 1U << 14, 139 PERF_SAMPLE_DATA_SRC = 1U << 15, 140 PERF_SAMPLE_IDENTIFIER = 1U << 16, 141 PERF_SAMPLE_TRANSACTION = 1U << 17, 142 PERF_SAMPLE_REGS_INTR = 1U << 18, 143 PERF_SAMPLE_PHYS_ADDR = 1U << 19, 144 145 PERF_SAMPLE_MAX = 1U << 20, /* non-ABI */ 146 }; 147 148 /* 149 * values to program into branch_sample_type when PERF_SAMPLE_BRANCH is set 150 * 151 * If the user does not pass priv level information via branch_sample_type, 152 * the kernel uses the event's priv level. Branch and event priv levels do 153 * not have to match. Branch priv level is checked for permissions. 154 * 155 * The branch types can be combined, however BRANCH_ANY covers all types 156 * of branches and therefore it supersedes all the other types. 157 */ 158 enum perf_branch_sample_type_shift { 159 PERF_SAMPLE_BRANCH_USER_SHIFT = 0, /* user branches */ 160 PERF_SAMPLE_BRANCH_KERNEL_SHIFT = 1, /* kernel branches */ 161 PERF_SAMPLE_BRANCH_HV_SHIFT = 2, /* hypervisor branches */ 162 163 PERF_SAMPLE_BRANCH_ANY_SHIFT = 3, /* any branch types */ 164 PERF_SAMPLE_BRANCH_ANY_CALL_SHIFT = 4, /* any call branch */ 165 PERF_SAMPLE_BRANCH_ANY_RETURN_SHIFT = 5, /* any return branch */ 166 PERF_SAMPLE_BRANCH_IND_CALL_SHIFT = 6, /* indirect calls */ 167 PERF_SAMPLE_BRANCH_ABORT_TX_SHIFT = 7, /* transaction aborts */ 168 PERF_SAMPLE_BRANCH_IN_TX_SHIFT = 8, /* in transaction */ 169 PERF_SAMPLE_BRANCH_NO_TX_SHIFT = 9, /* not in transaction */ 170 PERF_SAMPLE_BRANCH_COND_SHIFT = 10, /* conditional branches */ 171 172 PERF_SAMPLE_BRANCH_CALL_STACK_SHIFT = 11, /* call/ret stack */ 173 PERF_SAMPLE_BRANCH_IND_JUMP_SHIFT = 12, /* indirect jumps */ 174 PERF_SAMPLE_BRANCH_CALL_SHIFT = 13, /* direct call */ 175 176 PERF_SAMPLE_BRANCH_NO_FLAGS_SHIFT = 14, /* no flags */ 177 PERF_SAMPLE_BRANCH_NO_CYCLES_SHIFT = 15, /* no cycles */ 178 179 PERF_SAMPLE_BRANCH_TYPE_SAVE_SHIFT = 16, /* save branch type */ 180 181 PERF_SAMPLE_BRANCH_MAX_SHIFT /* non-ABI */ 182 }; 183 184 enum perf_branch_sample_type { 185 PERF_SAMPLE_BRANCH_USER = 1U << PERF_SAMPLE_BRANCH_USER_SHIFT, 186 PERF_SAMPLE_BRANCH_KERNEL = 1U << PERF_SAMPLE_BRANCH_KERNEL_SHIFT, 187 PERF_SAMPLE_BRANCH_HV = 1U << PERF_SAMPLE_BRANCH_HV_SHIFT, 188 189 PERF_SAMPLE_BRANCH_ANY = 1U << PERF_SAMPLE_BRANCH_ANY_SHIFT, 190 PERF_SAMPLE_BRANCH_ANY_CALL = 1U << PERF_SAMPLE_BRANCH_ANY_CALL_SHIFT, 191 PERF_SAMPLE_BRANCH_ANY_RETURN = 1U << PERF_SAMPLE_BRANCH_ANY_RETURN_SHIFT, 192 PERF_SAMPLE_BRANCH_IND_CALL = 1U << PERF_SAMPLE_BRANCH_IND_CALL_SHIFT, 193 PERF_SAMPLE_BRANCH_ABORT_TX = 1U << PERF_SAMPLE_BRANCH_ABORT_TX_SHIFT, 194 PERF_SAMPLE_BRANCH_IN_TX = 1U << PERF_SAMPLE_BRANCH_IN_TX_SHIFT, 195 PERF_SAMPLE_BRANCH_NO_TX = 1U << PERF_SAMPLE_BRANCH_NO_TX_SHIFT, 196 PERF_SAMPLE_BRANCH_COND = 1U << PERF_SAMPLE_BRANCH_COND_SHIFT, 197 198 PERF_SAMPLE_BRANCH_CALL_STACK = 1U << PERF_SAMPLE_BRANCH_CALL_STACK_SHIFT, 199 PERF_SAMPLE_BRANCH_IND_JUMP = 1U << PERF_SAMPLE_BRANCH_IND_JUMP_SHIFT, 200 PERF_SAMPLE_BRANCH_CALL = 1U << PERF_SAMPLE_BRANCH_CALL_SHIFT, 201 202 PERF_SAMPLE_BRANCH_NO_FLAGS = 1U << PERF_SAMPLE_BRANCH_NO_FLAGS_SHIFT, 203 PERF_SAMPLE_BRANCH_NO_CYCLES = 1U << PERF_SAMPLE_BRANCH_NO_CYCLES_SHIFT, 204 205 PERF_SAMPLE_BRANCH_TYPE_SAVE = 206 1U << PERF_SAMPLE_BRANCH_TYPE_SAVE_SHIFT, 207 208 PERF_SAMPLE_BRANCH_MAX = 1U << PERF_SAMPLE_BRANCH_MAX_SHIFT, 209 }; 210 211 /* 212 * Common flow change classification 213 */ 214 enum { 215 PERF_BR_UNKNOWN = 0, /* unknown */ 216 PERF_BR_COND = 1, /* conditional */ 217 PERF_BR_UNCOND = 2, /* unconditional */ 218 PERF_BR_IND = 3, /* indirect */ 219 PERF_BR_CALL = 4, /* function call */ 220 PERF_BR_IND_CALL = 5, /* indirect function call */ 221 PERF_BR_RET = 6, /* function return */ 222 PERF_BR_SYSCALL = 7, /* syscall */ 223 PERF_BR_SYSRET = 8, /* syscall return */ 224 PERF_BR_COND_CALL = 9, /* conditional function call */ 225 PERF_BR_COND_RET = 10, /* conditional function return */ 226 PERF_BR_MAX, 227 }; 228 229 #define PERF_SAMPLE_BRANCH_PLM_ALL \ 230 (PERF_SAMPLE_BRANCH_USER|\ 231 PERF_SAMPLE_BRANCH_KERNEL|\ 232 PERF_SAMPLE_BRANCH_HV) 233 234 /* 235 * Values to determine ABI of the registers dump. 236 */ 237 enum perf_sample_regs_abi { 238 PERF_SAMPLE_REGS_ABI_NONE = 0, 239 PERF_SAMPLE_REGS_ABI_32 = 1, 240 PERF_SAMPLE_REGS_ABI_64 = 2, 241 }; 242 243 /* 244 * Values for the memory transaction event qualifier, mostly for 245 * abort events. Multiple bits can be set. 246 */ 247 enum { 248 PERF_TXN_ELISION = (1 << 0), /* From elision */ 249 PERF_TXN_TRANSACTION = (1 << 1), /* From transaction */ 250 PERF_TXN_SYNC = (1 << 2), /* Instruction is related */ 251 PERF_TXN_ASYNC = (1 << 3), /* Instruction not related */ 252 PERF_TXN_RETRY = (1 << 4), /* Retry possible */ 253 PERF_TXN_CONFLICT = (1 << 5), /* Conflict abort */ 254 PERF_TXN_CAPACITY_WRITE = (1 << 6), /* Capacity write abort */ 255 PERF_TXN_CAPACITY_READ = (1 << 7), /* Capacity read abort */ 256 257 PERF_TXN_MAX = (1 << 8), /* non-ABI */ 258 259 /* bits 32..63 are reserved for the abort code */ 260 261 PERF_TXN_ABORT_MASK = (0xffffffffULL << 32), 262 PERF_TXN_ABORT_SHIFT = 32, 263 }; 264 265 /* 266 * The format of the data returned by read() on a perf event fd, 267 * as specified by attr.read_format: 268 * 269 * struct read_format { 270 * { u64 value; 271 * { u64 time_enabled; } && PERF_FORMAT_TOTAL_TIME_ENABLED 272 * { u64 time_running; } && PERF_FORMAT_TOTAL_TIME_RUNNING 273 * { u64 id; } && PERF_FORMAT_ID 274 * } && !PERF_FORMAT_GROUP 275 * 276 * { u64 nr; 277 * { u64 time_enabled; } && PERF_FORMAT_TOTAL_TIME_ENABLED 278 * { u64 time_running; } && PERF_FORMAT_TOTAL_TIME_RUNNING 279 * { u64 value; 280 * { u64 id; } && PERF_FORMAT_ID 281 * } cntr[nr]; 282 * } && PERF_FORMAT_GROUP 283 * }; 284 */ 285 enum perf_event_read_format { 286 PERF_FORMAT_TOTAL_TIME_ENABLED = 1U << 0, 287 PERF_FORMAT_TOTAL_TIME_RUNNING = 1U << 1, 288 PERF_FORMAT_ID = 1U << 2, 289 PERF_FORMAT_GROUP = 1U << 3, 290 291 PERF_FORMAT_MAX = 1U << 4, /* non-ABI */ 292 }; 293 294 #define PERF_ATTR_SIZE_VER0 64 /* sizeof first published struct */ 295 #define PERF_ATTR_SIZE_VER1 72 /* add: config2 */ 296 #define PERF_ATTR_SIZE_VER2 80 /* add: branch_sample_type */ 297 #define PERF_ATTR_SIZE_VER3 96 /* add: sample_regs_user */ 298 /* add: sample_stack_user */ 299 #define PERF_ATTR_SIZE_VER4 104 /* add: sample_regs_intr */ 300 #define PERF_ATTR_SIZE_VER5 112 /* add: aux_watermark */ 301 302 /* 303 * Hardware event_id to monitor via a performance monitoring event: 304 * 305 * @sample_max_stack: Max number of frame pointers in a callchain, 306 * should be < /proc/sys/kernel/perf_event_max_stack 307 */ 308 struct perf_event_attr { 309 310 /* 311 * Major type: hardware/software/tracepoint/etc. 312 */ 313 __u32 type; 314 315 /* 316 * Size of the attr structure, for fwd/bwd compat. 317 */ 318 __u32 size; 319 320 /* 321 * Type specific configuration information. 322 */ 323 __u64 config; 324 325 union { 326 __u64 sample_period; 327 __u64 sample_freq; 328 }; 329 330 __u64 sample_type; 331 __u64 read_format; 332 333 __u64 disabled : 1, /* off by default */ 334 inherit : 1, /* children inherit it */ 335 pinned : 1, /* must always be on PMU */ 336 exclusive : 1, /* only group on PMU */ 337 exclude_user : 1, /* don't count user */ 338 exclude_kernel : 1, /* ditto kernel */ 339 exclude_hv : 1, /* ditto hypervisor */ 340 exclude_idle : 1, /* don't count when idle */ 341 mmap : 1, /* include mmap data */ 342 comm : 1, /* include comm data */ 343 freq : 1, /* use freq, not period */ 344 inherit_stat : 1, /* per task counts */ 345 enable_on_exec : 1, /* next exec enables */ 346 task : 1, /* trace fork/exit */ 347 watermark : 1, /* wakeup_watermark */ 348 /* 349 * precise_ip: 350 * 351 * 0 - SAMPLE_IP can have arbitrary skid 352 * 1 - SAMPLE_IP must have constant skid 353 * 2 - SAMPLE_IP requested to have 0 skid 354 * 3 - SAMPLE_IP must have 0 skid 355 * 356 * See also PERF_RECORD_MISC_EXACT_IP 357 */ 358 precise_ip : 2, /* skid constraint */ 359 mmap_data : 1, /* non-exec mmap data */ 360 sample_id_all : 1, /* sample_type all events */ 361 362 exclude_host : 1, /* don't count in host */ 363 exclude_guest : 1, /* don't count in guest */ 364 365 exclude_callchain_kernel : 1, /* exclude kernel callchains */ 366 exclude_callchain_user : 1, /* exclude user callchains */ 367 mmap2 : 1, /* include mmap with inode data */ 368 comm_exec : 1, /* flag comm events that are due to an exec */ 369 use_clockid : 1, /* use @clockid for time fields */ 370 context_switch : 1, /* context switch data */ 371 write_backward : 1, /* Write ring buffer from end to beginning */ 372 namespaces : 1, /* include namespaces data */ 373 __reserved_1 : 35; 374 375 union { 376 __u32 wakeup_events; /* wakeup every n events */ 377 __u32 wakeup_watermark; /* bytes before wakeup */ 378 }; 379 380 __u32 bp_type; 381 union { 382 __u64 bp_addr; 383 __u64 config1; /* extension of config */ 384 }; 385 union { 386 __u64 bp_len; 387 __u64 config2; /* extension of config1 */ 388 }; 389 __u64 branch_sample_type; /* enum perf_branch_sample_type */ 390 391 /* 392 * Defines set of user regs to dump on samples. 393 * See asm/perf_regs.h for details. 394 */ 395 __u64 sample_regs_user; 396 397 /* 398 * Defines size of the user stack to dump on samples. 399 */ 400 __u32 sample_stack_user; 401 402 __s32 clockid; 403 /* 404 * Defines set of regs to dump for each sample 405 * state captured on: 406 * - precise = 0: PMU interrupt 407 * - precise > 0: sampled instruction 408 * 409 * See asm/perf_regs.h for details. 410 */ 411 __u64 sample_regs_intr; 412 413 /* 414 * Wakeup watermark for AUX area 415 */ 416 __u32 aux_watermark; 417 __u16 sample_max_stack; 418 __u16 __reserved_2; /* align to __u64 */ 419 }; 420 421 #define perf_flags(attr) (*(&(attr)->read_format + 1)) 422 423 /* 424 * Ioctls that can be done on a perf event fd: 425 */ 426 #define PERF_EVENT_IOC_ENABLE _IO ('$', 0) 427 #define PERF_EVENT_IOC_DISABLE _IO ('$', 1) 428 #define PERF_EVENT_IOC_REFRESH _IO ('$', 2) 429 #define PERF_EVENT_IOC_RESET _IO ('$', 3) 430 #define PERF_EVENT_IOC_PERIOD _IOW('$', 4, __u64) 431 #define PERF_EVENT_IOC_SET_OUTPUT _IO ('$', 5) 432 #define PERF_EVENT_IOC_SET_FILTER _IOW('$', 6, char *) 433 #define PERF_EVENT_IOC_ID _IOR('$', 7, __u64 *) 434 #define PERF_EVENT_IOC_SET_BPF _IOW('$', 8, __u32) 435 #define PERF_EVENT_IOC_PAUSE_OUTPUT _IOW('$', 9, __u32) 436 437 enum perf_event_ioc_flags { 438 PERF_IOC_FLAG_GROUP = 1U << 0, 439 }; 440 441 /* 442 * Structure of the page that can be mapped via mmap 443 */ 444 struct perf_event_mmap_page { 445 __u32 version; /* version number of this structure */ 446 __u32 compat_version; /* lowest version this is compat with */ 447 448 /* 449 * Bits needed to read the hw events in user-space. 450 * 451 * u32 seq, time_mult, time_shift, index, width; 452 * u64 count, enabled, running; 453 * u64 cyc, time_offset; 454 * s64 pmc = 0; 455 * 456 * do { 457 * seq = pc->lock; 458 * barrier() 459 * 460 * enabled = pc->time_enabled; 461 * running = pc->time_running; 462 * 463 * if (pc->cap_usr_time && enabled != running) { 464 * cyc = rdtsc(); 465 * time_offset = pc->time_offset; 466 * time_mult = pc->time_mult; 467 * time_shift = pc->time_shift; 468 * } 469 * 470 * index = pc->index; 471 * count = pc->offset; 472 * if (pc->cap_user_rdpmc && index) { 473 * width = pc->pmc_width; 474 * pmc = rdpmc(index - 1); 475 * } 476 * 477 * barrier(); 478 * } while (pc->lock != seq); 479 * 480 * NOTE: for obvious reason this only works on self-monitoring 481 * processes. 482 */ 483 __u32 lock; /* seqlock for synchronization */ 484 __u32 index; /* hardware event identifier */ 485 __s64 offset; /* add to hardware event value */ 486 __u64 time_enabled; /* time event active */ 487 __u64 time_running; /* time event on cpu */ 488 union { 489 __u64 capabilities; 490 struct { 491 __u64 cap_bit0 : 1, /* Always 0, deprecated, see commit 860f085b74e9 */ 492 cap_bit0_is_deprecated : 1, /* Always 1, signals that bit 0 is zero */ 493 494 cap_user_rdpmc : 1, /* The RDPMC instruction can be used to read counts */ 495 cap_user_time : 1, /* The time_* fields are used */ 496 cap_user_time_zero : 1, /* The time_zero field is used */ 497 cap_____res : 59; 498 }; 499 }; 500 501 /* 502 * If cap_user_rdpmc this field provides the bit-width of the value 503 * read using the rdpmc() or equivalent instruction. This can be used 504 * to sign extend the result like: 505 * 506 * pmc <<= 64 - width; 507 * pmc >>= 64 - width; // signed shift right 508 * count += pmc; 509 */ 510 __u16 pmc_width; 511 512 /* 513 * If cap_usr_time the below fields can be used to compute the time 514 * delta since time_enabled (in ns) using rdtsc or similar. 515 * 516 * u64 quot, rem; 517 * u64 delta; 518 * 519 * quot = (cyc >> time_shift); 520 * rem = cyc & (((u64)1 << time_shift) - 1); 521 * delta = time_offset + quot * time_mult + 522 * ((rem * time_mult) >> time_shift); 523 * 524 * Where time_offset,time_mult,time_shift and cyc are read in the 525 * seqcount loop described above. This delta can then be added to 526 * enabled and possible running (if index), improving the scaling: 527 * 528 * enabled += delta; 529 * if (index) 530 * running += delta; 531 * 532 * quot = count / running; 533 * rem = count % running; 534 * count = quot * enabled + (rem * enabled) / running; 535 */ 536 __u16 time_shift; 537 __u32 time_mult; 538 __u64 time_offset; 539 /* 540 * If cap_usr_time_zero, the hardware clock (e.g. TSC) can be calculated 541 * from sample timestamps. 542 * 543 * time = timestamp - time_zero; 544 * quot = time / time_mult; 545 * rem = time % time_mult; 546 * cyc = (quot << time_shift) + (rem << time_shift) / time_mult; 547 * 548 * And vice versa: 549 * 550 * quot = cyc >> time_shift; 551 * rem = cyc & (((u64)1 << time_shift) - 1); 552 * timestamp = time_zero + quot * time_mult + 553 * ((rem * time_mult) >> time_shift); 554 */ 555 __u64 time_zero; 556 __u32 size; /* Header size up to __reserved[] fields. */ 557 558 /* 559 * Hole for extension of the self monitor capabilities 560 */ 561 562 __u8 __reserved[118*8+4]; /* align to 1k. */ 563 564 /* 565 * Control data for the mmap() data buffer. 566 * 567 * User-space reading the @data_head value should issue an smp_rmb(), 568 * after reading this value. 569 * 570 * When the mapping is PROT_WRITE the @data_tail value should be 571 * written by userspace to reflect the last read data, after issueing 572 * an smp_mb() to separate the data read from the ->data_tail store. 573 * In this case the kernel will not over-write unread data. 574 * 575 * See perf_output_put_handle() for the data ordering. 576 * 577 * data_{offset,size} indicate the location and size of the perf record 578 * buffer within the mmapped area. 579 */ 580 __u64 data_head; /* head in the data section */ 581 __u64 data_tail; /* user-space written tail */ 582 __u64 data_offset; /* where the buffer starts */ 583 __u64 data_size; /* data buffer size */ 584 585 /* 586 * AUX area is defined by aux_{offset,size} fields that should be set 587 * by the userspace, so that 588 * 589 * aux_offset >= data_offset + data_size 590 * 591 * prior to mmap()ing it. Size of the mmap()ed area should be aux_size. 592 * 593 * Ring buffer pointers aux_{head,tail} have the same semantics as 594 * data_{head,tail} and same ordering rules apply. 595 */ 596 __u64 aux_head; 597 __u64 aux_tail; 598 __u64 aux_offset; 599 __u64 aux_size; 600 }; 601 602 #define PERF_RECORD_MISC_CPUMODE_MASK (7 << 0) 603 #define PERF_RECORD_MISC_CPUMODE_UNKNOWN (0 << 0) 604 #define PERF_RECORD_MISC_KERNEL (1 << 0) 605 #define PERF_RECORD_MISC_USER (2 << 0) 606 #define PERF_RECORD_MISC_HYPERVISOR (3 << 0) 607 #define PERF_RECORD_MISC_GUEST_KERNEL (4 << 0) 608 #define PERF_RECORD_MISC_GUEST_USER (5 << 0) 609 610 /* 611 * Indicates that /proc/PID/maps parsing are truncated by time out. 612 */ 613 #define PERF_RECORD_MISC_PROC_MAP_PARSE_TIMEOUT (1 << 12) 614 /* 615 * PERF_RECORD_MISC_MMAP_DATA and PERF_RECORD_MISC_COMM_EXEC are used on 616 * different events so can reuse the same bit position. 617 * Ditto PERF_RECORD_MISC_SWITCH_OUT. 618 */ 619 #define PERF_RECORD_MISC_MMAP_DATA (1 << 13) 620 #define PERF_RECORD_MISC_COMM_EXEC (1 << 13) 621 #define PERF_RECORD_MISC_SWITCH_OUT (1 << 13) 622 /* 623 * Indicates that the content of PERF_SAMPLE_IP points to 624 * the actual instruction that triggered the event. See also 625 * perf_event_attr::precise_ip. 626 */ 627 #define PERF_RECORD_MISC_EXACT_IP (1 << 14) 628 /* 629 * Reserve the last bit to indicate some extended misc field 630 */ 631 #define PERF_RECORD_MISC_EXT_RESERVED (1 << 15) 632 633 struct perf_event_header { 634 __u32 type; 635 __u16 misc; 636 __u16 size; 637 }; 638 639 struct perf_ns_link_info { 640 __u64 dev; 641 __u64 ino; 642 }; 643 644 enum { 645 NET_NS_INDEX = 0, 646 UTS_NS_INDEX = 1, 647 IPC_NS_INDEX = 2, 648 PID_NS_INDEX = 3, 649 USER_NS_INDEX = 4, 650 MNT_NS_INDEX = 5, 651 CGROUP_NS_INDEX = 6, 652 653 NR_NAMESPACES, /* number of available namespaces */ 654 }; 655 656 enum perf_event_type { 657 658 /* 659 * If perf_event_attr.sample_id_all is set then all event types will 660 * have the sample_type selected fields related to where/when 661 * (identity) an event took place (TID, TIME, ID, STREAM_ID, CPU, 662 * IDENTIFIER) described in PERF_RECORD_SAMPLE below, it will be stashed 663 * just after the perf_event_header and the fields already present for 664 * the existing fields, i.e. at the end of the payload. That way a newer 665 * perf.data file will be supported by older perf tools, with these new 666 * optional fields being ignored. 667 * 668 * struct sample_id { 669 * { u32 pid, tid; } && PERF_SAMPLE_TID 670 * { u64 time; } && PERF_SAMPLE_TIME 671 * { u64 id; } && PERF_SAMPLE_ID 672 * { u64 stream_id;} && PERF_SAMPLE_STREAM_ID 673 * { u32 cpu, res; } && PERF_SAMPLE_CPU 674 * { u64 id; } && PERF_SAMPLE_IDENTIFIER 675 * } && perf_event_attr::sample_id_all 676 * 677 * Note that PERF_SAMPLE_IDENTIFIER duplicates PERF_SAMPLE_ID. The 678 * advantage of PERF_SAMPLE_IDENTIFIER is that its position is fixed 679 * relative to header.size. 680 */ 681 682 /* 683 * The MMAP events record the PROT_EXEC mappings so that we can 684 * correlate userspace IPs to code. They have the following structure: 685 * 686 * struct { 687 * struct perf_event_header header; 688 * 689 * u32 pid, tid; 690 * u64 addr; 691 * u64 len; 692 * u64 pgoff; 693 * char filename[]; 694 * struct sample_id sample_id; 695 * }; 696 */ 697 PERF_RECORD_MMAP = 1, 698 699 /* 700 * struct { 701 * struct perf_event_header header; 702 * u64 id; 703 * u64 lost; 704 * struct sample_id sample_id; 705 * }; 706 */ 707 PERF_RECORD_LOST = 2, 708 709 /* 710 * struct { 711 * struct perf_event_header header; 712 * 713 * u32 pid, tid; 714 * char comm[]; 715 * struct sample_id sample_id; 716 * }; 717 */ 718 PERF_RECORD_COMM = 3, 719 720 /* 721 * struct { 722 * struct perf_event_header header; 723 * u32 pid, ppid; 724 * u32 tid, ptid; 725 * u64 time; 726 * struct sample_id sample_id; 727 * }; 728 */ 729 PERF_RECORD_EXIT = 4, 730 731 /* 732 * struct { 733 * struct perf_event_header header; 734 * u64 time; 735 * u64 id; 736 * u64 stream_id; 737 * struct sample_id sample_id; 738 * }; 739 */ 740 PERF_RECORD_THROTTLE = 5, 741 PERF_RECORD_UNTHROTTLE = 6, 742 743 /* 744 * struct { 745 * struct perf_event_header header; 746 * u32 pid, ppid; 747 * u32 tid, ptid; 748 * u64 time; 749 * struct sample_id sample_id; 750 * }; 751 */ 752 PERF_RECORD_FORK = 7, 753 754 /* 755 * struct { 756 * struct perf_event_header header; 757 * u32 pid, tid; 758 * 759 * struct read_format values; 760 * struct sample_id sample_id; 761 * }; 762 */ 763 PERF_RECORD_READ = 8, 764 765 /* 766 * struct { 767 * struct perf_event_header header; 768 * 769 * # 770 * # Note that PERF_SAMPLE_IDENTIFIER duplicates PERF_SAMPLE_ID. 771 * # The advantage of PERF_SAMPLE_IDENTIFIER is that its position 772 * # is fixed relative to header. 773 * # 774 * 775 * { u64 id; } && PERF_SAMPLE_IDENTIFIER 776 * { u64 ip; } && PERF_SAMPLE_IP 777 * { u32 pid, tid; } && PERF_SAMPLE_TID 778 * { u64 time; } && PERF_SAMPLE_TIME 779 * { u64 addr; } && PERF_SAMPLE_ADDR 780 * { u64 id; } && PERF_SAMPLE_ID 781 * { u64 stream_id;} && PERF_SAMPLE_STREAM_ID 782 * { u32 cpu, res; } && PERF_SAMPLE_CPU 783 * { u64 period; } && PERF_SAMPLE_PERIOD 784 * 785 * { struct read_format values; } && PERF_SAMPLE_READ 786 * 787 * { u64 nr, 788 * u64 ips[nr]; } && PERF_SAMPLE_CALLCHAIN 789 * 790 * # 791 * # The RAW record below is opaque data wrt the ABI 792 * # 793 * # That is, the ABI doesn't make any promises wrt to 794 * # the stability of its content, it may vary depending 795 * # on event, hardware, kernel version and phase of 796 * # the moon. 797 * # 798 * # In other words, PERF_SAMPLE_RAW contents are not an ABI. 799 * # 800 * 801 * { u32 size; 802 * char data[size];}&& PERF_SAMPLE_RAW 803 * 804 * { u64 nr; 805 * { u64 from, to, flags } lbr[nr];} && PERF_SAMPLE_BRANCH_STACK 806 * 807 * { u64 abi; # enum perf_sample_regs_abi 808 * u64 regs[weight(mask)]; } && PERF_SAMPLE_REGS_USER 809 * 810 * { u64 size; 811 * char data[size]; 812 * u64 dyn_size; } && PERF_SAMPLE_STACK_USER 813 * 814 * { u64 weight; } && PERF_SAMPLE_WEIGHT 815 * { u64 data_src; } && PERF_SAMPLE_DATA_SRC 816 * { u64 transaction; } && PERF_SAMPLE_TRANSACTION 817 * { u64 abi; # enum perf_sample_regs_abi 818 * u64 regs[weight(mask)]; } && PERF_SAMPLE_REGS_INTR 819 * { u64 phys_addr;} && PERF_SAMPLE_PHYS_ADDR 820 * }; 821 */ 822 PERF_RECORD_SAMPLE = 9, 823 824 /* 825 * The MMAP2 records are an augmented version of MMAP, they add 826 * maj, min, ino numbers to be used to uniquely identify each mapping 827 * 828 * struct { 829 * struct perf_event_header header; 830 * 831 * u32 pid, tid; 832 * u64 addr; 833 * u64 len; 834 * u64 pgoff; 835 * u32 maj; 836 * u32 min; 837 * u64 ino; 838 * u64 ino_generation; 839 * u32 prot, flags; 840 * char filename[]; 841 * struct sample_id sample_id; 842 * }; 843 */ 844 PERF_RECORD_MMAP2 = 10, 845 846 /* 847 * Records that new data landed in the AUX buffer part. 848 * 849 * struct { 850 * struct perf_event_header header; 851 * 852 * u64 aux_offset; 853 * u64 aux_size; 854 * u64 flags; 855 * struct sample_id sample_id; 856 * }; 857 */ 858 PERF_RECORD_AUX = 11, 859 860 /* 861 * Indicates that instruction trace has started 862 * 863 * struct { 864 * struct perf_event_header header; 865 * u32 pid; 866 * u32 tid; 867 * }; 868 */ 869 PERF_RECORD_ITRACE_START = 12, 870 871 /* 872 * Records the dropped/lost sample number. 873 * 874 * struct { 875 * struct perf_event_header header; 876 * 877 * u64 lost; 878 * struct sample_id sample_id; 879 * }; 880 */ 881 PERF_RECORD_LOST_SAMPLES = 13, 882 883 /* 884 * Records a context switch in or out (flagged by 885 * PERF_RECORD_MISC_SWITCH_OUT). See also 886 * PERF_RECORD_SWITCH_CPU_WIDE. 887 * 888 * struct { 889 * struct perf_event_header header; 890 * struct sample_id sample_id; 891 * }; 892 */ 893 PERF_RECORD_SWITCH = 14, 894 895 /* 896 * CPU-wide version of PERF_RECORD_SWITCH with next_prev_pid and 897 * next_prev_tid that are the next (switching out) or previous 898 * (switching in) pid/tid. 899 * 900 * struct { 901 * struct perf_event_header header; 902 * u32 next_prev_pid; 903 * u32 next_prev_tid; 904 * struct sample_id sample_id; 905 * }; 906 */ 907 PERF_RECORD_SWITCH_CPU_WIDE = 15, 908 909 /* 910 * struct { 911 * struct perf_event_header header; 912 * u32 pid; 913 * u32 tid; 914 * u64 nr_namespaces; 915 * { u64 dev, inode; } [nr_namespaces]; 916 * struct sample_id sample_id; 917 * }; 918 */ 919 PERF_RECORD_NAMESPACES = 16, 920 921 PERF_RECORD_MAX, /* non-ABI */ 922 }; 923 924 #define PERF_MAX_STACK_DEPTH 127 925 #define PERF_MAX_CONTEXTS_PER_STACK 8 926 927 enum perf_callchain_context { 928 PERF_CONTEXT_HV = (__u64)-32, 929 PERF_CONTEXT_KERNEL = (__u64)-128, 930 PERF_CONTEXT_USER = (__u64)-512, 931 932 PERF_CONTEXT_GUEST = (__u64)-2048, 933 PERF_CONTEXT_GUEST_KERNEL = (__u64)-2176, 934 PERF_CONTEXT_GUEST_USER = (__u64)-2560, 935 936 PERF_CONTEXT_MAX = (__u64)-4095, 937 }; 938 939 /** 940 * PERF_RECORD_AUX::flags bits 941 */ 942 #define PERF_AUX_FLAG_TRUNCATED 0x01 /* record was truncated to fit */ 943 #define PERF_AUX_FLAG_OVERWRITE 0x02 /* snapshot from overwrite mode */ 944 #define PERF_AUX_FLAG_PARTIAL 0x04 /* record contains gaps */ 945 946 #define PERF_FLAG_FD_NO_GROUP (1UL << 0) 947 #define PERF_FLAG_FD_OUTPUT (1UL << 1) 948 #define PERF_FLAG_PID_CGROUP (1UL << 2) /* pid=cgroup id, per-cpu mode only */ 949 #define PERF_FLAG_FD_CLOEXEC (1UL << 3) /* O_CLOEXEC */ 950 951 #if defined(__LITTLE_ENDIAN_BITFIELD) 952 union perf_mem_data_src { 953 __u64 val; 954 struct { 955 __u64 mem_op:5, /* type of opcode */ 956 mem_lvl:14, /* memory hierarchy level */ 957 mem_snoop:5, /* snoop mode */ 958 mem_lock:2, /* lock instr */ 959 mem_dtlb:7, /* tlb access */ 960 mem_lvl_num:4, /* memory hierarchy level number */ 961 mem_remote:1, /* remote */ 962 mem_snoopx:2, /* snoop mode, ext */ 963 mem_rsvd:24; 964 }; 965 }; 966 #elif defined(__BIG_ENDIAN_BITFIELD) 967 union perf_mem_data_src { 968 __u64 val; 969 struct { 970 __u64 mem_rsvd:24, 971 mem_snoopx:2, /* snoop mode, ext */ 972 mem_remote:1, /* remote */ 973 mem_lvl_num:4, /* memory hierarchy level number */ 974 mem_dtlb:7, /* tlb access */ 975 mem_lock:2, /* lock instr */ 976 mem_snoop:5, /* snoop mode */ 977 mem_lvl:14, /* memory hierarchy level */ 978 mem_op:5; /* type of opcode */ 979 }; 980 }; 981 #else 982 #error "Unknown endianness" 983 #endif 984 985 /* type of opcode (load/store/prefetch,code) */ 986 #define PERF_MEM_OP_NA 0x01 /* not available */ 987 #define PERF_MEM_OP_LOAD 0x02 /* load instruction */ 988 #define PERF_MEM_OP_STORE 0x04 /* store instruction */ 989 #define PERF_MEM_OP_PFETCH 0x08 /* prefetch */ 990 #define PERF_MEM_OP_EXEC 0x10 /* code (execution) */ 991 #define PERF_MEM_OP_SHIFT 0 992 993 /* memory hierarchy (memory level, hit or miss) */ 994 #define PERF_MEM_LVL_NA 0x01 /* not available */ 995 #define PERF_MEM_LVL_HIT 0x02 /* hit level */ 996 #define PERF_MEM_LVL_MISS 0x04 /* miss level */ 997 #define PERF_MEM_LVL_L1 0x08 /* L1 */ 998 #define PERF_MEM_LVL_LFB 0x10 /* Line Fill Buffer */ 999 #define PERF_MEM_LVL_L2 0x20 /* L2 */ 1000 #define PERF_MEM_LVL_L3 0x40 /* L3 */ 1001 #define PERF_MEM_LVL_LOC_RAM 0x80 /* Local DRAM */ 1002 #define PERF_MEM_LVL_REM_RAM1 0x100 /* Remote DRAM (1 hop) */ 1003 #define PERF_MEM_LVL_REM_RAM2 0x200 /* Remote DRAM (2 hops) */ 1004 #define PERF_MEM_LVL_REM_CCE1 0x400 /* Remote Cache (1 hop) */ 1005 #define PERF_MEM_LVL_REM_CCE2 0x800 /* Remote Cache (2 hops) */ 1006 #define PERF_MEM_LVL_IO 0x1000 /* I/O memory */ 1007 #define PERF_MEM_LVL_UNC 0x2000 /* Uncached memory */ 1008 #define PERF_MEM_LVL_SHIFT 5 1009 1010 #define PERF_MEM_REMOTE_REMOTE 0x01 /* Remote */ 1011 #define PERF_MEM_REMOTE_SHIFT 37 1012 1013 #define PERF_MEM_LVLNUM_L1 0x01 /* L1 */ 1014 #define PERF_MEM_LVLNUM_L2 0x02 /* L2 */ 1015 #define PERF_MEM_LVLNUM_L3 0x03 /* L3 */ 1016 #define PERF_MEM_LVLNUM_L4 0x04 /* L4 */ 1017 /* 5-0xa available */ 1018 #define PERF_MEM_LVLNUM_ANY_CACHE 0x0b /* Any cache */ 1019 #define PERF_MEM_LVLNUM_LFB 0x0c /* LFB */ 1020 #define PERF_MEM_LVLNUM_RAM 0x0d /* RAM */ 1021 #define PERF_MEM_LVLNUM_PMEM 0x0e /* PMEM */ 1022 #define PERF_MEM_LVLNUM_NA 0x0f /* N/A */ 1023 1024 #define PERF_MEM_LVLNUM_SHIFT 33 1025 1026 /* snoop mode */ 1027 #define PERF_MEM_SNOOP_NA 0x01 /* not available */ 1028 #define PERF_MEM_SNOOP_NONE 0x02 /* no snoop */ 1029 #define PERF_MEM_SNOOP_HIT 0x04 /* snoop hit */ 1030 #define PERF_MEM_SNOOP_MISS 0x08 /* snoop miss */ 1031 #define PERF_MEM_SNOOP_HITM 0x10 /* snoop hit modified */ 1032 #define PERF_MEM_SNOOP_SHIFT 19 1033 1034 #define PERF_MEM_SNOOPX_FWD 0x01 /* forward */ 1035 /* 1 free */ 1036 #define PERF_MEM_SNOOPX_SHIFT 37 1037 1038 /* locked instruction */ 1039 #define PERF_MEM_LOCK_NA 0x01 /* not available */ 1040 #define PERF_MEM_LOCK_LOCKED 0x02 /* locked transaction */ 1041 #define PERF_MEM_LOCK_SHIFT 24 1042 1043 /* TLB access */ 1044 #define PERF_MEM_TLB_NA 0x01 /* not available */ 1045 #define PERF_MEM_TLB_HIT 0x02 /* hit level */ 1046 #define PERF_MEM_TLB_MISS 0x04 /* miss level */ 1047 #define PERF_MEM_TLB_L1 0x08 /* L1 */ 1048 #define PERF_MEM_TLB_L2 0x10 /* L2 */ 1049 #define PERF_MEM_TLB_WK 0x20 /* Hardware Walker*/ 1050 #define PERF_MEM_TLB_OS 0x40 /* OS fault handler */ 1051 #define PERF_MEM_TLB_SHIFT 26 1052 1053 #define PERF_MEM_S(a, s) \ 1054 (((__u64)PERF_MEM_##a##_##s) << PERF_MEM_##a##_SHIFT) 1055 1056 /* 1057 * single taken branch record layout: 1058 * 1059 * from: source instruction (may not always be a branch insn) 1060 * to: branch target 1061 * mispred: branch target was mispredicted 1062 * predicted: branch target was predicted 1063 * 1064 * support for mispred, predicted is optional. In case it 1065 * is not supported mispred = predicted = 0. 1066 * 1067 * in_tx: running in a hardware transaction 1068 * abort: aborting a hardware transaction 1069 * cycles: cycles from last branch (or 0 if not supported) 1070 * type: branch type 1071 */ 1072 struct perf_branch_entry { 1073 __u64 from; 1074 __u64 to; 1075 __u64 mispred:1, /* target mispredicted */ 1076 predicted:1,/* target predicted */ 1077 in_tx:1, /* in transaction */ 1078 abort:1, /* transaction abort */ 1079 cycles:16, /* cycle count to last branch */ 1080 type:4, /* branch type */ 1081 reserved:40; 1082 }; 1083 1084 #endif /* _UAPI_LINUX_PERF_EVENT_H */ 1085