• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1  // SPDX-License-Identifier: GPL-2.0
2  /*
3   * Copyright IBM Corp. 2016
4   * Author(s): Martin Schwidefsky <schwidefsky@de.ibm.com>
5   *
6   * Adjunct processor bus, queue related code.
7   */
8  
9  #define KMSG_COMPONENT "ap"
10  #define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
11  
12  #include <linux/init.h>
13  #include <linux/slab.h>
14  #include <asm/facility.h>
15  
16  #include "ap_bus.h"
17  #include "ap_asm.h"
18  
19  /**
20   * ap_queue_irq_ctrl(): Control interruption on a AP queue.
21   * @qirqctrl: struct ap_qirq_ctrl (64 bit value)
22   * @ind: The notification indicator byte
23   *
24   * Returns AP queue status.
25   *
26   * Control interruption on the given AP queue.
27   * Just a simple wrapper function for the low level PQAP(AQIC)
28   * instruction available for other kernel modules.
29   */
ap_queue_irq_ctrl(ap_qid_t qid,struct ap_qirq_ctrl qirqctrl,void * ind)30  struct ap_queue_status ap_queue_irq_ctrl(ap_qid_t qid,
31  					 struct ap_qirq_ctrl qirqctrl,
32  					 void *ind)
33  {
34  	return ap_aqic(qid, qirqctrl, ind);
35  }
36  EXPORT_SYMBOL(ap_queue_irq_ctrl);
37  
38  /**
39   * ap_queue_enable_interruption(): Enable interruption on an AP queue.
40   * @qid: The AP queue number
41   * @ind: the notification indicator byte
42   *
43   * Enables interruption on AP queue via ap_aqic(). Based on the return
44   * value it waits a while and tests the AP queue if interrupts
45   * have been switched on using ap_test_queue().
46   */
ap_queue_enable_interruption(struct ap_queue * aq,void * ind)47  static int ap_queue_enable_interruption(struct ap_queue *aq, void *ind)
48  {
49  	struct ap_queue_status status;
50  	struct ap_qirq_ctrl qirqctrl = { 0 };
51  
52  	qirqctrl.ir = 1;
53  	qirqctrl.isc = AP_ISC;
54  	status = ap_aqic(aq->qid, qirqctrl, ind);
55  	switch (status.response_code) {
56  	case AP_RESPONSE_NORMAL:
57  	case AP_RESPONSE_OTHERWISE_CHANGED:
58  		return 0;
59  	case AP_RESPONSE_Q_NOT_AVAIL:
60  	case AP_RESPONSE_DECONFIGURED:
61  	case AP_RESPONSE_CHECKSTOPPED:
62  	case AP_RESPONSE_INVALID_ADDRESS:
63  		pr_err("Registering adapter interrupts for AP device %02x.%04x failed\n",
64  		       AP_QID_CARD(aq->qid),
65  		       AP_QID_QUEUE(aq->qid));
66  		return -EOPNOTSUPP;
67  	case AP_RESPONSE_RESET_IN_PROGRESS:
68  	case AP_RESPONSE_BUSY:
69  	default:
70  		return -EBUSY;
71  	}
72  }
73  
74  /**
75   * __ap_send(): Send message to adjunct processor queue.
76   * @qid: The AP queue number
77   * @psmid: The program supplied message identifier
78   * @msg: The message text
79   * @length: The message length
80   * @special: Special Bit
81   *
82   * Returns AP queue status structure.
83   * Condition code 1 on NQAP can't happen because the L bit is 1.
84   * Condition code 2 on NQAP also means the send is incomplete,
85   * because a segment boundary was reached. The NQAP is repeated.
86   */
87  static inline struct ap_queue_status
__ap_send(ap_qid_t qid,unsigned long long psmid,void * msg,size_t length,unsigned int special)88  __ap_send(ap_qid_t qid, unsigned long long psmid, void *msg, size_t length,
89  	  unsigned int special)
90  {
91  	if (special == 1)
92  		qid |= 0x400000UL;
93  	return ap_nqap(qid, psmid, msg, length);
94  }
95  
ap_send(ap_qid_t qid,unsigned long long psmid,void * msg,size_t length)96  int ap_send(ap_qid_t qid, unsigned long long psmid, void *msg, size_t length)
97  {
98  	struct ap_queue_status status;
99  
100  	status = __ap_send(qid, psmid, msg, length, 0);
101  	switch (status.response_code) {
102  	case AP_RESPONSE_NORMAL:
103  		return 0;
104  	case AP_RESPONSE_Q_FULL:
105  	case AP_RESPONSE_RESET_IN_PROGRESS:
106  		return -EBUSY;
107  	case AP_RESPONSE_REQ_FAC_NOT_INST:
108  		return -EINVAL;
109  	default:	/* Device is gone. */
110  		return -ENODEV;
111  	}
112  }
113  EXPORT_SYMBOL(ap_send);
114  
ap_recv(ap_qid_t qid,unsigned long long * psmid,void * msg,size_t length)115  int ap_recv(ap_qid_t qid, unsigned long long *psmid, void *msg, size_t length)
116  {
117  	struct ap_queue_status status;
118  
119  	if (msg == NULL)
120  		return -EINVAL;
121  	status = ap_dqap(qid, psmid, msg, length);
122  	switch (status.response_code) {
123  	case AP_RESPONSE_NORMAL:
124  		return 0;
125  	case AP_RESPONSE_NO_PENDING_REPLY:
126  		if (status.queue_empty)
127  			return -ENOENT;
128  		return -EBUSY;
129  	case AP_RESPONSE_RESET_IN_PROGRESS:
130  		return -EBUSY;
131  	default:
132  		return -ENODEV;
133  	}
134  }
135  EXPORT_SYMBOL(ap_recv);
136  
137  /* State machine definitions and helpers */
138  
ap_sm_nop(struct ap_queue * aq)139  static enum ap_wait ap_sm_nop(struct ap_queue *aq)
140  {
141  	return AP_WAIT_NONE;
142  }
143  
144  /**
145   * ap_sm_recv(): Receive pending reply messages from an AP queue but do
146   *	not change the state of the device.
147   * @aq: pointer to the AP queue
148   *
149   * Returns AP_WAIT_NONE, AP_WAIT_AGAIN, or AP_WAIT_INTERRUPT
150   */
ap_sm_recv(struct ap_queue * aq)151  static struct ap_queue_status ap_sm_recv(struct ap_queue *aq)
152  {
153  	struct ap_queue_status status;
154  	struct ap_message *ap_msg;
155  
156  	status = ap_dqap(aq->qid, &aq->reply->psmid,
157  			 aq->reply->message, aq->reply->length);
158  	switch (status.response_code) {
159  	case AP_RESPONSE_NORMAL:
160  		aq->queue_count--;
161  		if (aq->queue_count > 0)
162  			mod_timer(&aq->timeout,
163  				  jiffies + aq->request_timeout);
164  		list_for_each_entry(ap_msg, &aq->pendingq, list) {
165  			if (ap_msg->psmid != aq->reply->psmid)
166  				continue;
167  			list_del_init(&ap_msg->list);
168  			aq->pendingq_count--;
169  			ap_msg->receive(aq, ap_msg, aq->reply);
170  			break;
171  		}
172  	case AP_RESPONSE_NO_PENDING_REPLY:
173  		if (!status.queue_empty || aq->queue_count <= 0)
174  			break;
175  		/* The card shouldn't forget requests but who knows. */
176  		aq->queue_count = 0;
177  		list_splice_init(&aq->pendingq, &aq->requestq);
178  		aq->requestq_count += aq->pendingq_count;
179  		aq->pendingq_count = 0;
180  		break;
181  	default:
182  		break;
183  	}
184  	return status;
185  }
186  
187  /**
188   * ap_sm_read(): Receive pending reply messages from an AP queue.
189   * @aq: pointer to the AP queue
190   *
191   * Returns AP_WAIT_NONE, AP_WAIT_AGAIN, or AP_WAIT_INTERRUPT
192   */
ap_sm_read(struct ap_queue * aq)193  static enum ap_wait ap_sm_read(struct ap_queue *aq)
194  {
195  	struct ap_queue_status status;
196  
197  	if (!aq->reply)
198  		return AP_WAIT_NONE;
199  	status = ap_sm_recv(aq);
200  	switch (status.response_code) {
201  	case AP_RESPONSE_NORMAL:
202  		if (aq->queue_count > 0) {
203  			aq->state = AP_STATE_WORKING;
204  			return AP_WAIT_AGAIN;
205  		}
206  		aq->state = AP_STATE_IDLE;
207  		return AP_WAIT_NONE;
208  	case AP_RESPONSE_NO_PENDING_REPLY:
209  		if (aq->queue_count > 0)
210  			return AP_WAIT_INTERRUPT;
211  		aq->state = AP_STATE_IDLE;
212  		return AP_WAIT_NONE;
213  	default:
214  		aq->state = AP_STATE_BORKED;
215  		return AP_WAIT_NONE;
216  	}
217  }
218  
219  /**
220   * ap_sm_suspend_read(): Receive pending reply messages from an AP queue
221   * without changing the device state in between. In suspend mode we don't
222   * allow sending new requests, therefore just fetch pending replies.
223   * @aq: pointer to the AP queue
224   *
225   * Returns AP_WAIT_NONE or AP_WAIT_AGAIN
226   */
ap_sm_suspend_read(struct ap_queue * aq)227  static enum ap_wait ap_sm_suspend_read(struct ap_queue *aq)
228  {
229  	struct ap_queue_status status;
230  
231  	if (!aq->reply)
232  		return AP_WAIT_NONE;
233  	status = ap_sm_recv(aq);
234  	switch (status.response_code) {
235  	case AP_RESPONSE_NORMAL:
236  		if (aq->queue_count > 0)
237  			return AP_WAIT_AGAIN;
238  		/* fall through */
239  	default:
240  		return AP_WAIT_NONE;
241  	}
242  }
243  
244  /**
245   * ap_sm_write(): Send messages from the request queue to an AP queue.
246   * @aq: pointer to the AP queue
247   *
248   * Returns AP_WAIT_NONE, AP_WAIT_AGAIN, or AP_WAIT_INTERRUPT
249   */
ap_sm_write(struct ap_queue * aq)250  static enum ap_wait ap_sm_write(struct ap_queue *aq)
251  {
252  	struct ap_queue_status status;
253  	struct ap_message *ap_msg;
254  
255  	if (aq->requestq_count <= 0)
256  		return AP_WAIT_NONE;
257  	/* Start the next request on the queue. */
258  	ap_msg = list_entry(aq->requestq.next, struct ap_message, list);
259  	status = __ap_send(aq->qid, ap_msg->psmid,
260  			   ap_msg->message, ap_msg->length, ap_msg->special);
261  	switch (status.response_code) {
262  	case AP_RESPONSE_NORMAL:
263  		aq->queue_count++;
264  		if (aq->queue_count == 1)
265  			mod_timer(&aq->timeout, jiffies + aq->request_timeout);
266  		list_move_tail(&ap_msg->list, &aq->pendingq);
267  		aq->requestq_count--;
268  		aq->pendingq_count++;
269  		if (aq->queue_count < aq->card->queue_depth) {
270  			aq->state = AP_STATE_WORKING;
271  			return AP_WAIT_AGAIN;
272  		}
273  		/* fall through */
274  	case AP_RESPONSE_Q_FULL:
275  		aq->state = AP_STATE_QUEUE_FULL;
276  		return AP_WAIT_INTERRUPT;
277  	case AP_RESPONSE_RESET_IN_PROGRESS:
278  		aq->state = AP_STATE_RESET_WAIT;
279  		return AP_WAIT_TIMEOUT;
280  	case AP_RESPONSE_MESSAGE_TOO_BIG:
281  	case AP_RESPONSE_REQ_FAC_NOT_INST:
282  		list_del_init(&ap_msg->list);
283  		aq->requestq_count--;
284  		ap_msg->rc = -EINVAL;
285  		ap_msg->receive(aq, ap_msg, NULL);
286  		return AP_WAIT_AGAIN;
287  	default:
288  		aq->state = AP_STATE_BORKED;
289  		return AP_WAIT_NONE;
290  	}
291  }
292  
293  /**
294   * ap_sm_read_write(): Send and receive messages to/from an AP queue.
295   * @aq: pointer to the AP queue
296   *
297   * Returns AP_WAIT_NONE, AP_WAIT_AGAIN, or AP_WAIT_INTERRUPT
298   */
ap_sm_read_write(struct ap_queue * aq)299  static enum ap_wait ap_sm_read_write(struct ap_queue *aq)
300  {
301  	return min(ap_sm_read(aq), ap_sm_write(aq));
302  }
303  
304  /**
305   * ap_sm_reset(): Reset an AP queue.
306   * @qid: The AP queue number
307   *
308   * Submit the Reset command to an AP queue.
309   */
ap_sm_reset(struct ap_queue * aq)310  static enum ap_wait ap_sm_reset(struct ap_queue *aq)
311  {
312  	struct ap_queue_status status;
313  
314  	status = ap_rapq(aq->qid);
315  	switch (status.response_code) {
316  	case AP_RESPONSE_NORMAL:
317  	case AP_RESPONSE_RESET_IN_PROGRESS:
318  		aq->state = AP_STATE_RESET_WAIT;
319  		aq->interrupt = AP_INTR_DISABLED;
320  		return AP_WAIT_TIMEOUT;
321  	case AP_RESPONSE_BUSY:
322  		return AP_WAIT_TIMEOUT;
323  	case AP_RESPONSE_Q_NOT_AVAIL:
324  	case AP_RESPONSE_DECONFIGURED:
325  	case AP_RESPONSE_CHECKSTOPPED:
326  	default:
327  		aq->state = AP_STATE_BORKED;
328  		return AP_WAIT_NONE;
329  	}
330  }
331  
332  /**
333   * ap_sm_reset_wait(): Test queue for completion of the reset operation
334   * @aq: pointer to the AP queue
335   *
336   * Returns AP_POLL_IMMEDIATELY, AP_POLL_AFTER_TIMEROUT or 0.
337   */
ap_sm_reset_wait(struct ap_queue * aq)338  static enum ap_wait ap_sm_reset_wait(struct ap_queue *aq)
339  {
340  	struct ap_queue_status status;
341  	void *lsi_ptr;
342  
343  	if (aq->queue_count > 0 && aq->reply)
344  		/* Try to read a completed message and get the status */
345  		status = ap_sm_recv(aq);
346  	else
347  		/* Get the status with TAPQ */
348  		status = ap_tapq(aq->qid, NULL);
349  
350  	switch (status.response_code) {
351  	case AP_RESPONSE_NORMAL:
352  		lsi_ptr = ap_airq_ptr();
353  		if (lsi_ptr && ap_queue_enable_interruption(aq, lsi_ptr) == 0)
354  			aq->state = AP_STATE_SETIRQ_WAIT;
355  		else
356  			aq->state = (aq->queue_count > 0) ?
357  				AP_STATE_WORKING : AP_STATE_IDLE;
358  		return AP_WAIT_AGAIN;
359  	case AP_RESPONSE_BUSY:
360  	case AP_RESPONSE_RESET_IN_PROGRESS:
361  		return AP_WAIT_TIMEOUT;
362  	case AP_RESPONSE_Q_NOT_AVAIL:
363  	case AP_RESPONSE_DECONFIGURED:
364  	case AP_RESPONSE_CHECKSTOPPED:
365  	default:
366  		aq->state = AP_STATE_BORKED;
367  		return AP_WAIT_NONE;
368  	}
369  }
370  
371  /**
372   * ap_sm_setirq_wait(): Test queue for completion of the irq enablement
373   * @aq: pointer to the AP queue
374   *
375   * Returns AP_POLL_IMMEDIATELY, AP_POLL_AFTER_TIMEROUT or 0.
376   */
ap_sm_setirq_wait(struct ap_queue * aq)377  static enum ap_wait ap_sm_setirq_wait(struct ap_queue *aq)
378  {
379  	struct ap_queue_status status;
380  
381  	if (aq->queue_count > 0 && aq->reply)
382  		/* Try to read a completed message and get the status */
383  		status = ap_sm_recv(aq);
384  	else
385  		/* Get the status with TAPQ */
386  		status = ap_tapq(aq->qid, NULL);
387  
388  	if (status.irq_enabled == 1) {
389  		/* Irqs are now enabled */
390  		aq->interrupt = AP_INTR_ENABLED;
391  		aq->state = (aq->queue_count > 0) ?
392  			AP_STATE_WORKING : AP_STATE_IDLE;
393  	}
394  
395  	switch (status.response_code) {
396  	case AP_RESPONSE_NORMAL:
397  		if (aq->queue_count > 0)
398  			return AP_WAIT_AGAIN;
399  		/* fallthrough */
400  	case AP_RESPONSE_NO_PENDING_REPLY:
401  		return AP_WAIT_TIMEOUT;
402  	default:
403  		aq->state = AP_STATE_BORKED;
404  		return AP_WAIT_NONE;
405  	}
406  }
407  
408  /*
409   * AP state machine jump table
410   */
411  static ap_func_t *ap_jumptable[NR_AP_STATES][NR_AP_EVENTS] = {
412  	[AP_STATE_RESET_START] = {
413  		[AP_EVENT_POLL] = ap_sm_reset,
414  		[AP_EVENT_TIMEOUT] = ap_sm_nop,
415  	},
416  	[AP_STATE_RESET_WAIT] = {
417  		[AP_EVENT_POLL] = ap_sm_reset_wait,
418  		[AP_EVENT_TIMEOUT] = ap_sm_nop,
419  	},
420  	[AP_STATE_SETIRQ_WAIT] = {
421  		[AP_EVENT_POLL] = ap_sm_setirq_wait,
422  		[AP_EVENT_TIMEOUT] = ap_sm_nop,
423  	},
424  	[AP_STATE_IDLE] = {
425  		[AP_EVENT_POLL] = ap_sm_write,
426  		[AP_EVENT_TIMEOUT] = ap_sm_nop,
427  	},
428  	[AP_STATE_WORKING] = {
429  		[AP_EVENT_POLL] = ap_sm_read_write,
430  		[AP_EVENT_TIMEOUT] = ap_sm_reset,
431  	},
432  	[AP_STATE_QUEUE_FULL] = {
433  		[AP_EVENT_POLL] = ap_sm_read,
434  		[AP_EVENT_TIMEOUT] = ap_sm_reset,
435  	},
436  	[AP_STATE_SUSPEND_WAIT] = {
437  		[AP_EVENT_POLL] = ap_sm_suspend_read,
438  		[AP_EVENT_TIMEOUT] = ap_sm_nop,
439  	},
440  	[AP_STATE_BORKED] = {
441  		[AP_EVENT_POLL] = ap_sm_nop,
442  		[AP_EVENT_TIMEOUT] = ap_sm_nop,
443  	},
444  };
445  
ap_sm_event(struct ap_queue * aq,enum ap_event event)446  enum ap_wait ap_sm_event(struct ap_queue *aq, enum ap_event event)
447  {
448  	return ap_jumptable[aq->state][event](aq);
449  }
450  
ap_sm_event_loop(struct ap_queue * aq,enum ap_event event)451  enum ap_wait ap_sm_event_loop(struct ap_queue *aq, enum ap_event event)
452  {
453  	enum ap_wait wait;
454  
455  	while ((wait = ap_sm_event(aq, event)) == AP_WAIT_AGAIN)
456  		;
457  	return wait;
458  }
459  
460  /*
461   * Power management for queue devices
462   */
ap_queue_suspend(struct ap_device * ap_dev)463  void ap_queue_suspend(struct ap_device *ap_dev)
464  {
465  	struct ap_queue *aq = to_ap_queue(&ap_dev->device);
466  
467  	/* Poll on the device until all requests are finished. */
468  	spin_lock_bh(&aq->lock);
469  	aq->state = AP_STATE_SUSPEND_WAIT;
470  	while (ap_sm_event(aq, AP_EVENT_POLL) != AP_WAIT_NONE)
471  		;
472  	aq->state = AP_STATE_BORKED;
473  	spin_unlock_bh(&aq->lock);
474  }
475  EXPORT_SYMBOL(ap_queue_suspend);
476  
ap_queue_resume(struct ap_device * ap_dev)477  void ap_queue_resume(struct ap_device *ap_dev)
478  {
479  }
480  EXPORT_SYMBOL(ap_queue_resume);
481  
482  /*
483   * AP queue related attributes.
484   */
ap_req_count_show(struct device * dev,struct device_attribute * attr,char * buf)485  static ssize_t ap_req_count_show(struct device *dev,
486  				 struct device_attribute *attr,
487  				 char *buf)
488  {
489  	struct ap_queue *aq = to_ap_queue(dev);
490  	unsigned int req_cnt;
491  
492  	spin_lock_bh(&aq->lock);
493  	req_cnt = aq->total_request_count;
494  	spin_unlock_bh(&aq->lock);
495  	return snprintf(buf, PAGE_SIZE, "%d\n", req_cnt);
496  }
497  
ap_req_count_store(struct device * dev,struct device_attribute * attr,const char * buf,size_t count)498  static ssize_t ap_req_count_store(struct device *dev,
499  				  struct device_attribute *attr,
500  				  const char *buf, size_t count)
501  {
502  	struct ap_queue *aq = to_ap_queue(dev);
503  
504  	spin_lock_bh(&aq->lock);
505  	aq->total_request_count = 0;
506  	spin_unlock_bh(&aq->lock);
507  
508  	return count;
509  }
510  
511  static DEVICE_ATTR(request_count, 0644, ap_req_count_show, ap_req_count_store);
512  
ap_requestq_count_show(struct device * dev,struct device_attribute * attr,char * buf)513  static ssize_t ap_requestq_count_show(struct device *dev,
514  				      struct device_attribute *attr, char *buf)
515  {
516  	struct ap_queue *aq = to_ap_queue(dev);
517  	unsigned int reqq_cnt = 0;
518  
519  	spin_lock_bh(&aq->lock);
520  	reqq_cnt = aq->requestq_count;
521  	spin_unlock_bh(&aq->lock);
522  	return snprintf(buf, PAGE_SIZE, "%d\n", reqq_cnt);
523  }
524  
525  static DEVICE_ATTR(requestq_count, 0444, ap_requestq_count_show, NULL);
526  
ap_pendingq_count_show(struct device * dev,struct device_attribute * attr,char * buf)527  static ssize_t ap_pendingq_count_show(struct device *dev,
528  				      struct device_attribute *attr, char *buf)
529  {
530  	struct ap_queue *aq = to_ap_queue(dev);
531  	unsigned int penq_cnt = 0;
532  
533  	spin_lock_bh(&aq->lock);
534  	penq_cnt = aq->pendingq_count;
535  	spin_unlock_bh(&aq->lock);
536  	return snprintf(buf, PAGE_SIZE, "%d\n", penq_cnt);
537  }
538  
539  static DEVICE_ATTR(pendingq_count, 0444, ap_pendingq_count_show, NULL);
540  
ap_reset_show(struct device * dev,struct device_attribute * attr,char * buf)541  static ssize_t ap_reset_show(struct device *dev,
542  				      struct device_attribute *attr, char *buf)
543  {
544  	struct ap_queue *aq = to_ap_queue(dev);
545  	int rc = 0;
546  
547  	spin_lock_bh(&aq->lock);
548  	switch (aq->state) {
549  	case AP_STATE_RESET_START:
550  	case AP_STATE_RESET_WAIT:
551  		rc = snprintf(buf, PAGE_SIZE, "Reset in progress.\n");
552  		break;
553  	case AP_STATE_WORKING:
554  	case AP_STATE_QUEUE_FULL:
555  		rc = snprintf(buf, PAGE_SIZE, "Reset Timer armed.\n");
556  		break;
557  	default:
558  		rc = snprintf(buf, PAGE_SIZE, "No Reset Timer set.\n");
559  	}
560  	spin_unlock_bh(&aq->lock);
561  	return rc;
562  }
563  
564  static DEVICE_ATTR(reset, 0444, ap_reset_show, NULL);
565  
ap_interrupt_show(struct device * dev,struct device_attribute * attr,char * buf)566  static ssize_t ap_interrupt_show(struct device *dev,
567  				 struct device_attribute *attr, char *buf)
568  {
569  	struct ap_queue *aq = to_ap_queue(dev);
570  	int rc = 0;
571  
572  	spin_lock_bh(&aq->lock);
573  	if (aq->state == AP_STATE_SETIRQ_WAIT)
574  		rc = snprintf(buf, PAGE_SIZE, "Enable Interrupt pending.\n");
575  	else if (aq->interrupt == AP_INTR_ENABLED)
576  		rc = snprintf(buf, PAGE_SIZE, "Interrupts enabled.\n");
577  	else
578  		rc = snprintf(buf, PAGE_SIZE, "Interrupts disabled.\n");
579  	spin_unlock_bh(&aq->lock);
580  	return rc;
581  }
582  
583  static DEVICE_ATTR(interrupt, 0444, ap_interrupt_show, NULL);
584  
585  static struct attribute *ap_queue_dev_attrs[] = {
586  	&dev_attr_request_count.attr,
587  	&dev_attr_requestq_count.attr,
588  	&dev_attr_pendingq_count.attr,
589  	&dev_attr_reset.attr,
590  	&dev_attr_interrupt.attr,
591  	NULL
592  };
593  
594  static struct attribute_group ap_queue_dev_attr_group = {
595  	.attrs = ap_queue_dev_attrs
596  };
597  
598  static const struct attribute_group *ap_queue_dev_attr_groups[] = {
599  	&ap_queue_dev_attr_group,
600  	NULL
601  };
602  
603  static struct device_type ap_queue_type = {
604  	.name = "ap_queue",
605  	.groups = ap_queue_dev_attr_groups,
606  };
607  
ap_queue_device_release(struct device * dev)608  static void ap_queue_device_release(struct device *dev)
609  {
610  	struct ap_queue *aq = to_ap_queue(dev);
611  
612  	if (!list_empty(&aq->list)) {
613  		spin_lock_bh(&ap_list_lock);
614  		list_del_init(&aq->list);
615  		spin_unlock_bh(&ap_list_lock);
616  	}
617  	kfree(aq);
618  }
619  
ap_queue_create(ap_qid_t qid,int device_type)620  struct ap_queue *ap_queue_create(ap_qid_t qid, int device_type)
621  {
622  	struct ap_queue *aq;
623  
624  	aq = kzalloc(sizeof(*aq), GFP_KERNEL);
625  	if (!aq)
626  		return NULL;
627  	aq->ap_dev.device.release = ap_queue_device_release;
628  	aq->ap_dev.device.type = &ap_queue_type;
629  	aq->ap_dev.device_type = device_type;
630  	/* CEX6 toleration: map to CEX5 */
631  	if (device_type == AP_DEVICE_TYPE_CEX6)
632  		aq->ap_dev.device_type = AP_DEVICE_TYPE_CEX5;
633  	aq->qid = qid;
634  	aq->state = AP_STATE_RESET_START;
635  	aq->interrupt = AP_INTR_DISABLED;
636  	spin_lock_init(&aq->lock);
637  	INIT_LIST_HEAD(&aq->pendingq);
638  	INIT_LIST_HEAD(&aq->requestq);
639  	setup_timer(&aq->timeout, ap_request_timeout, (unsigned long) aq);
640  
641  	return aq;
642  }
643  
ap_queue_init_reply(struct ap_queue * aq,struct ap_message * reply)644  void ap_queue_init_reply(struct ap_queue *aq, struct ap_message *reply)
645  {
646  	aq->reply = reply;
647  
648  	spin_lock_bh(&aq->lock);
649  	ap_wait(ap_sm_event(aq, AP_EVENT_POLL));
650  	spin_unlock_bh(&aq->lock);
651  }
652  EXPORT_SYMBOL(ap_queue_init_reply);
653  
654  /**
655   * ap_queue_message(): Queue a request to an AP device.
656   * @aq: The AP device to queue the message to
657   * @ap_msg: The message that is to be added
658   */
ap_queue_message(struct ap_queue * aq,struct ap_message * ap_msg)659  void ap_queue_message(struct ap_queue *aq, struct ap_message *ap_msg)
660  {
661  	/* For asynchronous message handling a valid receive-callback
662  	 * is required.
663  	 */
664  	BUG_ON(!ap_msg->receive);
665  
666  	spin_lock_bh(&aq->lock);
667  	/* Queue the message. */
668  	list_add_tail(&ap_msg->list, &aq->requestq);
669  	aq->requestq_count++;
670  	aq->total_request_count++;
671  	atomic_inc(&aq->card->total_request_count);
672  	/* Send/receive as many request from the queue as possible. */
673  	ap_wait(ap_sm_event_loop(aq, AP_EVENT_POLL));
674  	spin_unlock_bh(&aq->lock);
675  }
676  EXPORT_SYMBOL(ap_queue_message);
677  
678  /**
679   * ap_cancel_message(): Cancel a crypto request.
680   * @aq: The AP device that has the message queued
681   * @ap_msg: The message that is to be removed
682   *
683   * Cancel a crypto request. This is done by removing the request
684   * from the device pending or request queue. Note that the
685   * request stays on the AP queue. When it finishes the message
686   * reply will be discarded because the psmid can't be found.
687   */
ap_cancel_message(struct ap_queue * aq,struct ap_message * ap_msg)688  void ap_cancel_message(struct ap_queue *aq, struct ap_message *ap_msg)
689  {
690  	struct ap_message *tmp;
691  
692  	spin_lock_bh(&aq->lock);
693  	if (!list_empty(&ap_msg->list)) {
694  		list_for_each_entry(tmp, &aq->pendingq, list)
695  			if (tmp->psmid == ap_msg->psmid) {
696  				aq->pendingq_count--;
697  				goto found;
698  			}
699  		aq->requestq_count--;
700  found:
701  		list_del_init(&ap_msg->list);
702  	}
703  	spin_unlock_bh(&aq->lock);
704  }
705  EXPORT_SYMBOL(ap_cancel_message);
706  
707  /**
708   * __ap_flush_queue(): Flush requests.
709   * @aq: Pointer to the AP queue
710   *
711   * Flush all requests from the request/pending queue of an AP device.
712   */
__ap_flush_queue(struct ap_queue * aq)713  static void __ap_flush_queue(struct ap_queue *aq)
714  {
715  	struct ap_message *ap_msg, *next;
716  
717  	list_for_each_entry_safe(ap_msg, next, &aq->pendingq, list) {
718  		list_del_init(&ap_msg->list);
719  		aq->pendingq_count--;
720  		ap_msg->rc = -EAGAIN;
721  		ap_msg->receive(aq, ap_msg, NULL);
722  	}
723  	list_for_each_entry_safe(ap_msg, next, &aq->requestq, list) {
724  		list_del_init(&ap_msg->list);
725  		aq->requestq_count--;
726  		ap_msg->rc = -EAGAIN;
727  		ap_msg->receive(aq, ap_msg, NULL);
728  	}
729  }
730  
ap_flush_queue(struct ap_queue * aq)731  void ap_flush_queue(struct ap_queue *aq)
732  {
733  	spin_lock_bh(&aq->lock);
734  	__ap_flush_queue(aq);
735  	spin_unlock_bh(&aq->lock);
736  }
737  EXPORT_SYMBOL(ap_flush_queue);
738  
ap_queue_remove(struct ap_queue * aq)739  void ap_queue_remove(struct ap_queue *aq)
740  {
741  	ap_flush_queue(aq);
742  	del_timer_sync(&aq->timeout);
743  }
744  EXPORT_SYMBOL(ap_queue_remove);
745