1 /*
2 * iop13xx PCI support
3 * Copyright (c) 2005-2006, Intel Corporation.
4 *
5 * This program is free software; you can redistribute it and/or modify it
6 * under the terms and conditions of the GNU General Public License,
7 * version 2, as published by the Free Software Foundation.
8 *
9 * This program is distributed in the hope it will be useful, but WITHOUT
10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
12 * more details.
13 *
14 * You should have received a copy of the GNU General Public License along with
15 * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
16 * Place - Suite 330, Boston, MA 02111-1307 USA.
17 *
18 */
19
20 #include <linux/pci.h>
21 #include <linux/slab.h>
22 #include <linux/delay.h>
23 #include <linux/jiffies.h>
24 #include <linux/export.h>
25 #include <asm/irq.h>
26 #include <mach/hardware.h>
27 #include <asm/sizes.h>
28 #include <asm/signal.h>
29 #include <asm/mach/pci.h>
30 #include "pci.h"
31
32 #define IOP13XX_PCI_DEBUG 0
33 #define PRINTK(x...) ((void)(IOP13XX_PCI_DEBUG && printk(x)))
34
35 u32 iop13xx_atux_pmmr_offset; /* This offset can change based on strapping */
36 u32 iop13xx_atue_pmmr_offset; /* This offset can change based on strapping */
37 static struct pci_bus *pci_bus_atux = 0;
38 static struct pci_bus *pci_bus_atue = 0;
39 void __iomem *iop13xx_atue_mem_base;
40 void __iomem *iop13xx_atux_mem_base;
41 size_t iop13xx_atue_mem_size;
42 size_t iop13xx_atux_mem_size;
43
44 EXPORT_SYMBOL(iop13xx_atue_mem_base);
45 EXPORT_SYMBOL(iop13xx_atux_mem_base);
46 EXPORT_SYMBOL(iop13xx_atue_mem_size);
47 EXPORT_SYMBOL(iop13xx_atux_mem_size);
48
49 int init_atu = 0; /* Flag to select which ATU(s) to initialize / disable */
50 static unsigned long atux_trhfa_timeout = 0; /* Trhfa = RST# high to first
51 access */
52
53 /* Scan the initialized busses and ioremap the requested memory range
54 */
iop13xx_map_pci_memory(void)55 void iop13xx_map_pci_memory(void)
56 {
57 int atu;
58 struct pci_bus *bus;
59 struct pci_dev *dev;
60 resource_size_t end = 0;
61
62 for (atu = 0; atu < 2; atu++) {
63 bus = atu ? pci_bus_atue : pci_bus_atux;
64 if (bus) {
65 list_for_each_entry(dev, &bus->devices, bus_list) {
66 int i;
67 int max = 7;
68
69 if (dev->subordinate)
70 max = DEVICE_COUNT_RESOURCE;
71
72 for (i = 0; i < max; i++) {
73 struct resource *res = &dev->resource[i];
74 if (res->flags & IORESOURCE_MEM)
75 end = max(res->end, end);
76 }
77 }
78
79 switch(atu) {
80 case 0:
81 iop13xx_atux_mem_size =
82 (end - IOP13XX_PCIX_LOWER_MEM_RA) + 1;
83
84 /* 16MB align the request */
85 if (iop13xx_atux_mem_size & (SZ_16M - 1)) {
86 iop13xx_atux_mem_size &= ~(SZ_16M - 1);
87 iop13xx_atux_mem_size += SZ_16M;
88 }
89
90 if (end) {
91 iop13xx_atux_mem_base = __arm_ioremap_pfn(
92 __phys_to_pfn(IOP13XX_PCIX_LOWER_MEM_PA)
93 , 0, iop13xx_atux_mem_size, MT_DEVICE);
94 if (!iop13xx_atux_mem_base) {
95 printk("%s: atux allocation "
96 "failed\n", __func__);
97 BUG();
98 }
99 } else
100 iop13xx_atux_mem_size = 0;
101 PRINTK("%s: atu: %d bus_size: %d mem_base: %p\n",
102 __func__, atu, iop13xx_atux_mem_size,
103 iop13xx_atux_mem_base);
104 break;
105 case 1:
106 iop13xx_atue_mem_size =
107 (end - IOP13XX_PCIE_LOWER_MEM_RA) + 1;
108
109 /* 16MB align the request */
110 if (iop13xx_atue_mem_size & (SZ_16M - 1)) {
111 iop13xx_atue_mem_size &= ~(SZ_16M - 1);
112 iop13xx_atue_mem_size += SZ_16M;
113 }
114
115 if (end) {
116 iop13xx_atue_mem_base = __arm_ioremap_pfn(
117 __phys_to_pfn(IOP13XX_PCIE_LOWER_MEM_PA)
118 , 0, iop13xx_atue_mem_size, MT_DEVICE);
119 if (!iop13xx_atue_mem_base) {
120 printk("%s: atue allocation "
121 "failed\n", __func__);
122 BUG();
123 }
124 } else
125 iop13xx_atue_mem_size = 0;
126 PRINTK("%s: atu: %d bus_size: %d mem_base: %p\n",
127 __func__, atu, iop13xx_atue_mem_size,
128 iop13xx_atue_mem_base);
129 break;
130 }
131
132 printk("%s: Initialized (%uM @ resource/virtual: %08lx/%p)\n",
133 atu ? "ATUE" : "ATUX",
134 (atu ? iop13xx_atue_mem_size : iop13xx_atux_mem_size) /
135 SZ_1M,
136 atu ? IOP13XX_PCIE_LOWER_MEM_RA :
137 IOP13XX_PCIX_LOWER_MEM_RA,
138 atu ? iop13xx_atue_mem_base :
139 iop13xx_atux_mem_base);
140 end = 0;
141 }
142
143 }
144 }
145
iop13xx_atu_function(int atu)146 static int iop13xx_atu_function(int atu)
147 {
148 int func = 0;
149 /* the function number depends on the value of the
150 * IOP13XX_INTERFACE_SEL_PCIX reset strap
151 * see C-Spec section 3.17
152 */
153 switch(atu) {
154 case IOP13XX_INIT_ATU_ATUX:
155 if (__raw_readl(IOP13XX_ESSR0) & IOP13XX_INTERFACE_SEL_PCIX)
156 func = 5;
157 else
158 func = 0;
159 break;
160 case IOP13XX_INIT_ATU_ATUE:
161 if (__raw_readl(IOP13XX_ESSR0) & IOP13XX_INTERFACE_SEL_PCIX)
162 func = 0;
163 else
164 func = 5;
165 break;
166 default:
167 BUG();
168 }
169
170 return func;
171 }
172
173 /* iop13xx_atux_cfg_address - format a configuration address for atux
174 * @bus: Target bus to access
175 * @devfn: Combined device number and function number
176 * @where: Desired register's address offset
177 *
178 * Convert the parameters to a configuration address formatted
179 * according the PCI-X 2.0 specification
180 */
iop13xx_atux_cfg_address(struct pci_bus * bus,int devfn,int where)181 static u32 iop13xx_atux_cfg_address(struct pci_bus *bus, int devfn, int where)
182 {
183 struct pci_sys_data *sys = bus->sysdata;
184 u32 addr;
185
186 if (sys->busnr == bus->number)
187 addr = 1 << (PCI_SLOT(devfn) + 16) | (PCI_SLOT(devfn) << 11);
188 else
189 addr = bus->number << 16 | PCI_SLOT(devfn) << 11 | 1;
190
191 addr |= PCI_FUNC(devfn) << 8 | ((where & 0xff) & ~3);
192 addr |= ((where & 0xf00) >> 8) << 24; /* upper register number */
193
194 return addr;
195 }
196
197 /* iop13xx_atue_cfg_address - format a configuration address for atue
198 * @bus: Target bus to access
199 * @devfn: Combined device number and function number
200 * @where: Desired register's address offset
201 *
202 * Convert the parameters to an address usable by the ATUE_OCCAR
203 */
iop13xx_atue_cfg_address(struct pci_bus * bus,int devfn,int where)204 static u32 iop13xx_atue_cfg_address(struct pci_bus *bus, int devfn, int where)
205 {
206 struct pci_sys_data *sys = bus->sysdata;
207 u32 addr;
208
209 PRINTK("iop13xx_atue_cfg_address: bus: %d dev: %d func: %d",
210 bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn));
211 addr = ((u32) bus->number) << IOP13XX_ATUE_OCCAR_BUS_NUM |
212 ((u32) PCI_SLOT(devfn)) << IOP13XX_ATUE_OCCAR_DEV_NUM |
213 ((u32) PCI_FUNC(devfn)) << IOP13XX_ATUE_OCCAR_FUNC_NUM |
214 (where & ~0x3);
215
216 if (sys->busnr != bus->number)
217 addr |= 1; /* type 1 access */
218
219 return addr;
220 }
221
222 /* This routine checks the status of the last configuration cycle. If an error
223 * was detected it returns >0, else it returns a 0. The errors being checked
224 * are parity, master abort, target abort (master and target). These types of
225 * errors occur during a config cycle where there is no device, like during
226 * the discovery stage.
227 */
iop13xx_atux_pci_status(int clear)228 static int iop13xx_atux_pci_status(int clear)
229 {
230 unsigned int status;
231 int err = 0;
232
233 /*
234 * Check the status registers.
235 */
236 status = __raw_readw(IOP13XX_ATUX_ATUSR);
237 if (status & IOP_PCI_STATUS_ERROR)
238 {
239 PRINTK("\t\t\tPCI error: ATUSR %#08x", status);
240 if(clear)
241 __raw_writew(status & IOP_PCI_STATUS_ERROR,
242 IOP13XX_ATUX_ATUSR);
243 err = 1;
244 }
245 status = __raw_readl(IOP13XX_ATUX_ATUISR);
246 if (status & IOP13XX_ATUX_ATUISR_ERROR)
247 {
248 PRINTK("\t\t\tPCI error interrupt: ATUISR %#08x", status);
249 if(clear)
250 __raw_writel(status & IOP13XX_ATUX_ATUISR_ERROR,
251 IOP13XX_ATUX_ATUISR);
252 err = 1;
253 }
254 return err;
255 }
256
257 /* Simply write the address register and read the configuration
258 * data. Note that the data dependency on %0 encourages an abort
259 * to be detected before we return.
260 */
iop13xx_atux_read(unsigned long addr)261 static u32 iop13xx_atux_read(unsigned long addr)
262 {
263 u32 val;
264
265 __asm__ __volatile__(
266 "str %1, [%2]\n\t"
267 "ldr %0, [%3]\n\t"
268 "mov %0, %0\n\t"
269 : "=r" (val)
270 : "r" (addr), "r" (IOP13XX_ATUX_OCCAR), "r" (IOP13XX_ATUX_OCCDR));
271
272 return val;
273 }
274
275 /* The read routines must check the error status of the last configuration
276 * cycle. If there was an error, the routine returns all hex f's.
277 */
278 static int
iop13xx_atux_read_config(struct pci_bus * bus,unsigned int devfn,int where,int size,u32 * value)279 iop13xx_atux_read_config(struct pci_bus *bus, unsigned int devfn, int where,
280 int size, u32 *value)
281 {
282 unsigned long addr = iop13xx_atux_cfg_address(bus, devfn, where);
283 u32 val = iop13xx_atux_read(addr) >> ((where & 3) * 8);
284
285 if (iop13xx_atux_pci_status(1) || is_atux_occdr_error()) {
286 __raw_writel(__raw_readl(IOP13XX_XBG_BECSR) & 3,
287 IOP13XX_XBG_BECSR);
288 val = 0xffffffff;
289 }
290
291 *value = val;
292
293 return PCIBIOS_SUCCESSFUL;
294 }
295
296 static int
iop13xx_atux_write_config(struct pci_bus * bus,unsigned int devfn,int where,int size,u32 value)297 iop13xx_atux_write_config(struct pci_bus *bus, unsigned int devfn, int where,
298 int size, u32 value)
299 {
300 unsigned long addr = iop13xx_atux_cfg_address(bus, devfn, where);
301 u32 val;
302
303 if (size != 4) {
304 val = iop13xx_atux_read(addr);
305 if (!iop13xx_atux_pci_status(1) == 0)
306 return PCIBIOS_SUCCESSFUL;
307
308 where = (where & 3) * 8;
309
310 if (size == 1)
311 val &= ~(0xff << where);
312 else
313 val &= ~(0xffff << where);
314
315 __raw_writel(val | value << where, IOP13XX_ATUX_OCCDR);
316 } else {
317 __raw_writel(addr, IOP13XX_ATUX_OCCAR);
318 __raw_writel(value, IOP13XX_ATUX_OCCDR);
319 }
320
321 return PCIBIOS_SUCCESSFUL;
322 }
323
324 static struct pci_ops iop13xx_atux_ops = {
325 .read = iop13xx_atux_read_config,
326 .write = iop13xx_atux_write_config,
327 };
328
329 /* This routine checks the status of the last configuration cycle. If an error
330 * was detected it returns >0, else it returns a 0. The errors being checked
331 * are parity, master abort, target abort (master and target). These types of
332 * errors occur during a config cycle where there is no device, like during
333 * the discovery stage.
334 */
iop13xx_atue_pci_status(int clear)335 static int iop13xx_atue_pci_status(int clear)
336 {
337 unsigned int status;
338 int err = 0;
339
340 /*
341 * Check the status registers.
342 */
343
344 /* standard pci status register */
345 status = __raw_readw(IOP13XX_ATUE_ATUSR);
346 if (status & IOP_PCI_STATUS_ERROR) {
347 PRINTK("\t\t\tPCI error: ATUSR %#08x", status);
348 if(clear)
349 __raw_writew(status & IOP_PCI_STATUS_ERROR,
350 IOP13XX_ATUE_ATUSR);
351 err++;
352 }
353
354 /* check the normal status bits in the ATUISR */
355 status = __raw_readl(IOP13XX_ATUE_ATUISR);
356 if (status & IOP13XX_ATUE_ATUISR_ERROR) {
357 PRINTK("\t\t\tPCI error: ATUISR %#08x", status);
358 if (clear)
359 __raw_writew(status & IOP13XX_ATUE_ATUISR_ERROR,
360 IOP13XX_ATUE_ATUISR);
361 err++;
362
363 /* check the PCI-E status if the ATUISR reports an interface error */
364 if (status & IOP13XX_ATUE_STAT_PCI_IFACE_ERR) {
365 /* get the unmasked errors */
366 status = __raw_readl(IOP13XX_ATUE_PIE_STS) &
367 ~(__raw_readl(IOP13XX_ATUE_PIE_MSK));
368
369 if (status) {
370 PRINTK("\t\t\tPCI-E error: ATUE_PIE_STS %#08x",
371 __raw_readl(IOP13XX_ATUE_PIE_STS));
372 err++;
373 } else {
374 PRINTK("\t\t\tPCI-E error: ATUE_PIE_STS %#08x",
375 __raw_readl(IOP13XX_ATUE_PIE_STS));
376 PRINTK("\t\t\tPCI-E error: ATUE_PIE_MSK %#08x",
377 __raw_readl(IOP13XX_ATUE_PIE_MSK));
378 BUG();
379 }
380
381 if(clear)
382 __raw_writel(status, IOP13XX_ATUE_PIE_STS);
383 }
384 }
385
386 return err;
387 }
388
389 static int
iop13xx_pcie_map_irq(const struct pci_dev * dev,u8 idsel,u8 pin)390 iop13xx_pcie_map_irq(const struct pci_dev *dev, u8 idsel, u8 pin)
391 {
392 WARN_ON(idsel != 0);
393
394 switch (pin) {
395 case 1: return ATUE_INTA;
396 case 2: return ATUE_INTB;
397 case 3: return ATUE_INTC;
398 case 4: return ATUE_INTD;
399 default: return -1;
400 }
401 }
402
iop13xx_atue_read(unsigned long addr)403 static u32 iop13xx_atue_read(unsigned long addr)
404 {
405 u32 val;
406
407 __raw_writel(addr, IOP13XX_ATUE_OCCAR);
408 val = __raw_readl(IOP13XX_ATUE_OCCDR);
409
410 rmb();
411
412 return val;
413 }
414
415 /* The read routines must check the error status of the last configuration
416 * cycle. If there was an error, the routine returns all hex f's.
417 */
418 static int
iop13xx_atue_read_config(struct pci_bus * bus,unsigned int devfn,int where,int size,u32 * value)419 iop13xx_atue_read_config(struct pci_bus *bus, unsigned int devfn, int where,
420 int size, u32 *value)
421 {
422 u32 val;
423 unsigned long addr = iop13xx_atue_cfg_address(bus, devfn, where);
424
425 /* Hide device numbers > 0 on the local PCI-E bus (Type 0 access) */
426 if (!PCI_SLOT(devfn) || (addr & 1)) {
427 val = iop13xx_atue_read(addr) >> ((where & 3) * 8);
428 if( iop13xx_atue_pci_status(1) || is_atue_occdr_error() ) {
429 __raw_writel(__raw_readl(IOP13XX_XBG_BECSR) & 3,
430 IOP13XX_XBG_BECSR);
431 val = 0xffffffff;
432 }
433
434 PRINTK("addr=%#0lx, val=%#010x", addr, val);
435 } else
436 val = 0xffffffff;
437
438 *value = val;
439
440 return PCIBIOS_SUCCESSFUL;
441 }
442
443 static int
iop13xx_atue_write_config(struct pci_bus * bus,unsigned int devfn,int where,int size,u32 value)444 iop13xx_atue_write_config(struct pci_bus *bus, unsigned int devfn, int where,
445 int size, u32 value)
446 {
447 unsigned long addr = iop13xx_atue_cfg_address(bus, devfn, where);
448 u32 val;
449
450 if (size != 4) {
451 val = iop13xx_atue_read(addr);
452 if (!iop13xx_atue_pci_status(1) == 0)
453 return PCIBIOS_SUCCESSFUL;
454
455 where = (where & 3) * 8;
456
457 if (size == 1)
458 val &= ~(0xff << where);
459 else
460 val &= ~(0xffff << where);
461
462 __raw_writel(val | value << where, IOP13XX_ATUE_OCCDR);
463 } else {
464 __raw_writel(addr, IOP13XX_ATUE_OCCAR);
465 __raw_writel(value, IOP13XX_ATUE_OCCDR);
466 }
467
468 return PCIBIOS_SUCCESSFUL;
469 }
470
471 static struct pci_ops iop13xx_atue_ops = {
472 .read = iop13xx_atue_read_config,
473 .write = iop13xx_atue_write_config,
474 };
475
476 /* When a PCI device does not exist during config cycles, the XScale gets a
477 * bus error instead of returning 0xffffffff. We can't rely on the ATU status
478 * bits to tell us that it was indeed a configuration cycle that caused this
479 * error especially in the case when the ATUE link is down. Instead we rely
480 * on data from the south XSI bridge to validate the abort
481 */
482 int
iop13xx_pci_abort(unsigned long addr,unsigned int fsr,struct pt_regs * regs)483 iop13xx_pci_abort(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
484 {
485 PRINTK("Data abort: address = 0x%08lx "
486 "fsr = 0x%03x PC = 0x%08lx LR = 0x%08lx",
487 addr, fsr, regs->ARM_pc, regs->ARM_lr);
488
489 PRINTK("IOP13XX_XBG_BECSR: %#10x", __raw_readl(IOP13XX_XBG_BECSR));
490 PRINTK("IOP13XX_XBG_BERAR: %#10x", __raw_readl(IOP13XX_XBG_BERAR));
491 PRINTK("IOP13XX_XBG_BERUAR: %#10x", __raw_readl(IOP13XX_XBG_BERUAR));
492
493 /* If it was an imprecise abort, then we need to correct the
494 * return address to be _after_ the instruction.
495 */
496 if (fsr & (1 << 10))
497 regs->ARM_pc += 4;
498
499 if (is_atue_occdr_error() || is_atux_occdr_error())
500 return 0;
501 else
502 return 1;
503 }
504
505 /* Scan an IOP13XX PCI bus. nr selects which ATU we use.
506 */
iop13xx_scan_bus(int nr,struct pci_host_bridge * bridge)507 int iop13xx_scan_bus(int nr, struct pci_host_bridge *bridge)
508 {
509 int which_atu, ret;
510 struct pci_sys_data *sys = pci_host_bridge_priv(bridge);
511
512 switch (init_atu) {
513 case IOP13XX_INIT_ATU_ATUX:
514 which_atu = nr ? 0 : IOP13XX_INIT_ATU_ATUX;
515 break;
516 case IOP13XX_INIT_ATU_ATUE:
517 which_atu = nr ? 0 : IOP13XX_INIT_ATU_ATUE;
518 break;
519 case (IOP13XX_INIT_ATU_ATUX | IOP13XX_INIT_ATU_ATUE):
520 which_atu = nr ? IOP13XX_INIT_ATU_ATUE : IOP13XX_INIT_ATU_ATUX;
521 break;
522 default:
523 which_atu = 0;
524 }
525
526 if (!which_atu) {
527 BUG();
528 return -ENODEV;
529 }
530
531 list_splice_init(&sys->resources, &bridge->windows);
532 bridge->dev.parent = NULL;
533 bridge->sysdata = sys;
534 bridge->busnr = sys->busnr;
535
536 switch (which_atu) {
537 case IOP13XX_INIT_ATU_ATUX:
538 if (time_after_eq(jiffies + msecs_to_jiffies(1000),
539 atux_trhfa_timeout)) /* ensure not wrap */
540 while(time_before(jiffies, atux_trhfa_timeout))
541 udelay(100);
542
543 bridge->ops = &iop13xx_atux_ops;
544 ret = pci_scan_root_bus_bridge(bridge);
545 if (!ret)
546 pci_bus_atux = bridge->bus;
547 break;
548 case IOP13XX_INIT_ATU_ATUE:
549 bridge->ops = &iop13xx_atue_ops;
550 ret = pci_scan_root_bus_bridge(bridge);
551 if (!ret)
552 pci_bus_atue = bridge->bus;
553 break;
554 default:
555 ret = -EINVAL;
556 }
557
558 return ret;
559 }
560
561 /* This function is called from iop13xx_pci_init() after assigning valid
562 * values to iop13xx_atue_pmmr_offset. This is the location for common
563 * setup of ATUE for all IOP13XX implementations.
564 */
iop13xx_atue_setup(void)565 void __init iop13xx_atue_setup(void)
566 {
567 int func = iop13xx_atu_function(IOP13XX_INIT_ATU_ATUE);
568 u32 reg_val;
569
570 #ifdef CONFIG_PCI_MSI
571 /* BAR 0 (inbound msi window) */
572 __raw_writel(IOP13XX_MU_BASE_PHYS, IOP13XX_MU_MUBAR);
573 __raw_writel(~(IOP13XX_MU_WINDOW_SIZE - 1), IOP13XX_ATUE_IALR0);
574 __raw_writel(IOP13XX_MU_BASE_PHYS, IOP13XX_ATUE_IATVR0);
575 __raw_writel(IOP13XX_MU_BASE_PCI, IOP13XX_ATUE_IABAR0);
576 #endif
577
578 /* BAR 1 (1:1 mapping with Physical RAM) */
579 /* Set limit and enable */
580 __raw_writel(~(IOP13XX_MAX_RAM_SIZE - PHYS_OFFSET - 1) & ~0x1,
581 IOP13XX_ATUE_IALR1);
582 __raw_writel(0x0, IOP13XX_ATUE_IAUBAR1);
583
584 /* Set base at the top of the reserved address space */
585 __raw_writel(PHYS_OFFSET | PCI_BASE_ADDRESS_MEM_TYPE_64 |
586 PCI_BASE_ADDRESS_MEM_PREFETCH, IOP13XX_ATUE_IABAR1);
587
588 /* 1:1 mapping with physical ram
589 * (leave big endian byte swap disabled)
590 */
591 __raw_writel(0x0, IOP13XX_ATUE_IAUTVR1);
592 __raw_writel(PHYS_OFFSET, IOP13XX_ATUE_IATVR1);
593
594 /* Outbound window 1 (PCIX/PCIE memory window) */
595 /* 32 bit Address Space */
596 __raw_writel(0x0, IOP13XX_ATUE_OUMWTVR1);
597 /* PA[35:32] */
598 __raw_writel(IOP13XX_ATUE_OUMBAR_ENABLE |
599 (IOP13XX_PCIE_MEM_PHYS_OFFSET >> 32),
600 IOP13XX_ATUE_OUMBAR1);
601
602 /* Setup the I/O Bar
603 * A[35-16] in 31-12
604 */
605 __raw_writel(((IOP13XX_PCIE_LOWER_IO_PA >> 0x4) & 0xfffff000),
606 IOP13XX_ATUE_OIOBAR);
607 __raw_writel(IOP13XX_PCIE_LOWER_IO_BA, IOP13XX_ATUE_OIOWTVR);
608
609 /* clear startup errors */
610 iop13xx_atue_pci_status(1);
611
612 /* OIOBAR function number
613 */
614 reg_val = __raw_readl(IOP13XX_ATUE_OIOBAR);
615 reg_val &= ~0x7;
616 reg_val |= func;
617 __raw_writel(reg_val, IOP13XX_ATUE_OIOBAR);
618
619 /* OUMBAR function numbers
620 */
621 reg_val = __raw_readl(IOP13XX_ATUE_OUMBAR0);
622 reg_val &= ~(IOP13XX_ATU_OUMBAR_FUNC_NUM_MASK <<
623 IOP13XX_ATU_OUMBAR_FUNC_NUM);
624 reg_val |= func << IOP13XX_ATU_OUMBAR_FUNC_NUM;
625 __raw_writel(reg_val, IOP13XX_ATUE_OUMBAR0);
626
627 reg_val = __raw_readl(IOP13XX_ATUE_OUMBAR1);
628 reg_val &= ~(IOP13XX_ATU_OUMBAR_FUNC_NUM_MASK <<
629 IOP13XX_ATU_OUMBAR_FUNC_NUM);
630 reg_val |= func << IOP13XX_ATU_OUMBAR_FUNC_NUM;
631 __raw_writel(reg_val, IOP13XX_ATUE_OUMBAR1);
632
633 reg_val = __raw_readl(IOP13XX_ATUE_OUMBAR2);
634 reg_val &= ~(IOP13XX_ATU_OUMBAR_FUNC_NUM_MASK <<
635 IOP13XX_ATU_OUMBAR_FUNC_NUM);
636 reg_val |= func << IOP13XX_ATU_OUMBAR_FUNC_NUM;
637 __raw_writel(reg_val, IOP13XX_ATUE_OUMBAR2);
638
639 reg_val = __raw_readl(IOP13XX_ATUE_OUMBAR3);
640 reg_val &= ~(IOP13XX_ATU_OUMBAR_FUNC_NUM_MASK <<
641 IOP13XX_ATU_OUMBAR_FUNC_NUM);
642 reg_val |= func << IOP13XX_ATU_OUMBAR_FUNC_NUM;
643 __raw_writel(reg_val, IOP13XX_ATUE_OUMBAR3);
644
645 /* Enable inbound and outbound cycles
646 */
647 reg_val = __raw_readw(IOP13XX_ATUE_ATUCMD);
648 reg_val |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER |
649 PCI_COMMAND_PARITY | PCI_COMMAND_SERR;
650 __raw_writew(reg_val, IOP13XX_ATUE_ATUCMD);
651
652 reg_val = __raw_readl(IOP13XX_ATUE_ATUCR);
653 reg_val |= IOP13XX_ATUE_ATUCR_OUT_EN |
654 IOP13XX_ATUE_ATUCR_IVM;
655 __raw_writel(reg_val, IOP13XX_ATUE_ATUCR);
656 }
657
iop13xx_atue_disable(void)658 void __init iop13xx_atue_disable(void)
659 {
660 u32 reg_val;
661
662 __raw_writew(0x0, IOP13XX_ATUE_ATUCMD);
663 __raw_writel(IOP13XX_ATUE_ATUCR_IVM, IOP13XX_ATUE_ATUCR);
664
665 /* wait for cycles to quiesce */
666 while (__raw_readl(IOP13XX_ATUE_PCSR) & (IOP13XX_ATUE_PCSR_OUT_Q_BUSY |
667 IOP13XX_ATUE_PCSR_IN_Q_BUSY |
668 IOP13XX_ATUE_PCSR_LLRB_BUSY))
669 cpu_relax();
670
671 /* BAR 0 ( Disabled ) */
672 __raw_writel(0x0, IOP13XX_ATUE_IAUBAR0);
673 __raw_writel(0x0, IOP13XX_ATUE_IABAR0);
674 __raw_writel(0x0, IOP13XX_ATUE_IAUTVR0);
675 __raw_writel(0x0, IOP13XX_ATUE_IATVR0);
676 __raw_writel(0x0, IOP13XX_ATUE_IALR0);
677 reg_val = __raw_readl(IOP13XX_ATUE_OUMBAR0);
678 reg_val &= ~IOP13XX_ATUE_OUMBAR_ENABLE;
679 __raw_writel(reg_val, IOP13XX_ATUE_OUMBAR0);
680
681 /* BAR 1 ( Disabled ) */
682 __raw_writel(0x0, IOP13XX_ATUE_IAUBAR1);
683 __raw_writel(0x0, IOP13XX_ATUE_IABAR1);
684 __raw_writel(0x0, IOP13XX_ATUE_IAUTVR1);
685 __raw_writel(0x0, IOP13XX_ATUE_IATVR1);
686 __raw_writel(0x0, IOP13XX_ATUE_IALR1);
687 reg_val = __raw_readl(IOP13XX_ATUE_OUMBAR1);
688 reg_val &= ~IOP13XX_ATUE_OUMBAR_ENABLE;
689 __raw_writel(reg_val, IOP13XX_ATUE_OUMBAR1);
690
691 /* BAR 2 ( Disabled ) */
692 __raw_writel(0x0, IOP13XX_ATUE_IAUBAR2);
693 __raw_writel(0x0, IOP13XX_ATUE_IABAR2);
694 __raw_writel(0x0, IOP13XX_ATUE_IAUTVR2);
695 __raw_writel(0x0, IOP13XX_ATUE_IATVR2);
696 __raw_writel(0x0, IOP13XX_ATUE_IALR2);
697 reg_val = __raw_readl(IOP13XX_ATUE_OUMBAR2);
698 reg_val &= ~IOP13XX_ATUE_OUMBAR_ENABLE;
699 __raw_writel(reg_val, IOP13XX_ATUE_OUMBAR2);
700
701 /* BAR 3 ( Disabled ) */
702 reg_val = __raw_readl(IOP13XX_ATUE_OUMBAR3);
703 reg_val &= ~IOP13XX_ATUE_OUMBAR_ENABLE;
704 __raw_writel(reg_val, IOP13XX_ATUE_OUMBAR3);
705
706 /* Setup the I/O Bar
707 * A[35-16] in 31-12
708 */
709 __raw_writel((IOP13XX_PCIE_LOWER_IO_PA >> 0x4) & 0xfffff000,
710 IOP13XX_ATUE_OIOBAR);
711 __raw_writel(IOP13XX_PCIE_LOWER_IO_BA, IOP13XX_ATUE_OIOWTVR);
712 }
713
714 /* This function is called from iop13xx_pci_init() after assigning valid
715 * values to iop13xx_atux_pmmr_offset. This is the location for common
716 * setup of ATUX for all IOP13XX implementations.
717 */
iop13xx_atux_setup(void)718 void __init iop13xx_atux_setup(void)
719 {
720 u32 reg_val;
721 int func = iop13xx_atu_function(IOP13XX_INIT_ATU_ATUX);
722
723 /* Take PCI-X bus out of reset if bootloader hasn't already.
724 * According to spec, we should wait for 2^25 PCI clocks to meet
725 * the PCI timing parameter Trhfa (RST# high to first access).
726 * This is rarely necessary and often ignored.
727 */
728 reg_val = __raw_readl(IOP13XX_ATUX_PCSR);
729 if (reg_val & IOP13XX_ATUX_PCSR_P_RSTOUT) {
730 int msec = (reg_val >> IOP13XX_ATUX_PCSR_FREQ_OFFSET) & 0x7;
731 msec = 1000 / (8-msec); /* bits 100=133MHz, 111=>33MHz */
732 __raw_writel(reg_val & ~IOP13XX_ATUX_PCSR_P_RSTOUT,
733 IOP13XX_ATUX_PCSR);
734 atux_trhfa_timeout = jiffies + msecs_to_jiffies(msec);
735 }
736 else
737 atux_trhfa_timeout = jiffies;
738
739 #ifdef CONFIG_PCI_MSI
740 /* BAR 0 (inbound msi window) */
741 __raw_writel(IOP13XX_MU_BASE_PHYS, IOP13XX_MU_MUBAR);
742 __raw_writel(~(IOP13XX_MU_WINDOW_SIZE - 1), IOP13XX_ATUX_IALR0);
743 __raw_writel(IOP13XX_MU_BASE_PHYS, IOP13XX_ATUX_IATVR0);
744 __raw_writel(IOP13XX_MU_BASE_PCI, IOP13XX_ATUX_IABAR0);
745 #endif
746
747 /* BAR 1 (1:1 mapping with Physical RAM) */
748 /* Set limit and enable */
749 __raw_writel(~(IOP13XX_MAX_RAM_SIZE - PHYS_OFFSET - 1) & ~0x1,
750 IOP13XX_ATUX_IALR1);
751 __raw_writel(0x0, IOP13XX_ATUX_IAUBAR1);
752
753 /* Set base at the top of the reserved address space */
754 __raw_writel(PHYS_OFFSET | PCI_BASE_ADDRESS_MEM_TYPE_64 |
755 PCI_BASE_ADDRESS_MEM_PREFETCH, IOP13XX_ATUX_IABAR1);
756
757 /* 1:1 mapping with physical ram
758 * (leave big endian byte swap disabled)
759 */
760 __raw_writel(0x0, IOP13XX_ATUX_IAUTVR1);
761 __raw_writel(PHYS_OFFSET, IOP13XX_ATUX_IATVR1);
762
763 /* Outbound window 1 (PCIX/PCIE memory window) */
764 /* 32 bit Address Space */
765 __raw_writel(0x0, IOP13XX_ATUX_OUMWTVR1);
766 /* PA[35:32] */
767 __raw_writel(IOP13XX_ATUX_OUMBAR_ENABLE |
768 IOP13XX_PCIX_MEM_PHYS_OFFSET >> 32,
769 IOP13XX_ATUX_OUMBAR1);
770
771 /* Setup the I/O Bar
772 * A[35-16] in 31-12
773 */
774 __raw_writel((IOP13XX_PCIX_LOWER_IO_PA >> 0x4) & 0xfffff000,
775 IOP13XX_ATUX_OIOBAR);
776 __raw_writel(IOP13XX_PCIX_LOWER_IO_BA, IOP13XX_ATUX_OIOWTVR);
777
778 /* clear startup errors */
779 iop13xx_atux_pci_status(1);
780
781 /* OIOBAR function number
782 */
783 reg_val = __raw_readl(IOP13XX_ATUX_OIOBAR);
784 reg_val &= ~0x7;
785 reg_val |= func;
786 __raw_writel(reg_val, IOP13XX_ATUX_OIOBAR);
787
788 /* OUMBAR function numbers
789 */
790 reg_val = __raw_readl(IOP13XX_ATUX_OUMBAR0);
791 reg_val &= ~(IOP13XX_ATU_OUMBAR_FUNC_NUM_MASK <<
792 IOP13XX_ATU_OUMBAR_FUNC_NUM);
793 reg_val |= func << IOP13XX_ATU_OUMBAR_FUNC_NUM;
794 __raw_writel(reg_val, IOP13XX_ATUX_OUMBAR0);
795
796 reg_val = __raw_readl(IOP13XX_ATUX_OUMBAR1);
797 reg_val &= ~(IOP13XX_ATU_OUMBAR_FUNC_NUM_MASK <<
798 IOP13XX_ATU_OUMBAR_FUNC_NUM);
799 reg_val |= func << IOP13XX_ATU_OUMBAR_FUNC_NUM;
800 __raw_writel(reg_val, IOP13XX_ATUX_OUMBAR1);
801
802 reg_val = __raw_readl(IOP13XX_ATUX_OUMBAR2);
803 reg_val &= ~(IOP13XX_ATU_OUMBAR_FUNC_NUM_MASK <<
804 IOP13XX_ATU_OUMBAR_FUNC_NUM);
805 reg_val |= func << IOP13XX_ATU_OUMBAR_FUNC_NUM;
806 __raw_writel(reg_val, IOP13XX_ATUX_OUMBAR2);
807
808 reg_val = __raw_readl(IOP13XX_ATUX_OUMBAR3);
809 reg_val &= ~(IOP13XX_ATU_OUMBAR_FUNC_NUM_MASK <<
810 IOP13XX_ATU_OUMBAR_FUNC_NUM);
811 reg_val |= func << IOP13XX_ATU_OUMBAR_FUNC_NUM;
812 __raw_writel(reg_val, IOP13XX_ATUX_OUMBAR3);
813
814 /* Enable inbound and outbound cycles
815 */
816 reg_val = __raw_readw(IOP13XX_ATUX_ATUCMD);
817 reg_val |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER |
818 PCI_COMMAND_PARITY | PCI_COMMAND_SERR;
819 __raw_writew(reg_val, IOP13XX_ATUX_ATUCMD);
820
821 reg_val = __raw_readl(IOP13XX_ATUX_ATUCR);
822 reg_val |= IOP13XX_ATUX_ATUCR_OUT_EN;
823 __raw_writel(reg_val, IOP13XX_ATUX_ATUCR);
824 }
825
iop13xx_atux_disable(void)826 void __init iop13xx_atux_disable(void)
827 {
828 u32 reg_val;
829
830 __raw_writew(0x0, IOP13XX_ATUX_ATUCMD);
831 __raw_writel(0x0, IOP13XX_ATUX_ATUCR);
832
833 /* wait for cycles to quiesce */
834 while (__raw_readl(IOP13XX_ATUX_PCSR) & (IOP13XX_ATUX_PCSR_OUT_Q_BUSY |
835 IOP13XX_ATUX_PCSR_IN_Q_BUSY))
836 cpu_relax();
837
838 /* BAR 0 ( Disabled ) */
839 __raw_writel(0x0, IOP13XX_ATUX_IAUBAR0);
840 __raw_writel(0x0, IOP13XX_ATUX_IABAR0);
841 __raw_writel(0x0, IOP13XX_ATUX_IAUTVR0);
842 __raw_writel(0x0, IOP13XX_ATUX_IATVR0);
843 __raw_writel(0x0, IOP13XX_ATUX_IALR0);
844 reg_val = __raw_readl(IOP13XX_ATUX_OUMBAR0);
845 reg_val &= ~IOP13XX_ATUX_OUMBAR_ENABLE;
846 __raw_writel(reg_val, IOP13XX_ATUX_OUMBAR0);
847
848 /* BAR 1 ( Disabled ) */
849 __raw_writel(0x0, IOP13XX_ATUX_IAUBAR1);
850 __raw_writel(0x0, IOP13XX_ATUX_IABAR1);
851 __raw_writel(0x0, IOP13XX_ATUX_IAUTVR1);
852 __raw_writel(0x0, IOP13XX_ATUX_IATVR1);
853 __raw_writel(0x0, IOP13XX_ATUX_IALR1);
854 reg_val = __raw_readl(IOP13XX_ATUX_OUMBAR1);
855 reg_val &= ~IOP13XX_ATUX_OUMBAR_ENABLE;
856 __raw_writel(reg_val, IOP13XX_ATUX_OUMBAR1);
857
858 /* BAR 2 ( Disabled ) */
859 __raw_writel(0x0, IOP13XX_ATUX_IAUBAR2);
860 __raw_writel(0x0, IOP13XX_ATUX_IABAR2);
861 __raw_writel(0x0, IOP13XX_ATUX_IAUTVR2);
862 __raw_writel(0x0, IOP13XX_ATUX_IATVR2);
863 __raw_writel(0x0, IOP13XX_ATUX_IALR2);
864 reg_val = __raw_readl(IOP13XX_ATUX_OUMBAR2);
865 reg_val &= ~IOP13XX_ATUX_OUMBAR_ENABLE;
866 __raw_writel(reg_val, IOP13XX_ATUX_OUMBAR2);
867
868 /* BAR 3 ( Disabled ) */
869 __raw_writel(0x0, IOP13XX_ATUX_IAUBAR3);
870 __raw_writel(0x0, IOP13XX_ATUX_IABAR3);
871 __raw_writel(0x0, IOP13XX_ATUX_IAUTVR3);
872 __raw_writel(0x0, IOP13XX_ATUX_IATVR3);
873 __raw_writel(0x0, IOP13XX_ATUX_IALR3);
874 reg_val = __raw_readl(IOP13XX_ATUX_OUMBAR3);
875 reg_val &= ~IOP13XX_ATUX_OUMBAR_ENABLE;
876 __raw_writel(reg_val, IOP13XX_ATUX_OUMBAR3);
877
878 /* Setup the I/O Bar
879 * A[35-16] in 31-12
880 */
881 __raw_writel((IOP13XX_PCIX_LOWER_IO_PA >> 0x4) & 0xfffff000,
882 IOP13XX_ATUX_OIOBAR);
883 __raw_writel(IOP13XX_PCIX_LOWER_IO_BA, IOP13XX_ATUX_OIOWTVR);
884 }
885
iop13xx_set_atu_mmr_bases(void)886 void __init iop13xx_set_atu_mmr_bases(void)
887 {
888 /* Based on ESSR0, determine the ATU X/E offsets */
889 switch(__raw_readl(IOP13XX_ESSR0) &
890 (IOP13XX_CONTROLLER_ONLY | IOP13XX_INTERFACE_SEL_PCIX)) {
891 /* both asserted */
892 case 0:
893 iop13xx_atux_pmmr_offset = IOP13XX_ATU1_PMMR_OFFSET;
894 iop13xx_atue_pmmr_offset = IOP13XX_ATU2_PMMR_OFFSET;
895 break;
896 /* IOP13XX_CONTROLLER_ONLY = deasserted
897 * IOP13XX_INTERFACE_SEL_PCIX = asserted
898 */
899 case IOP13XX_CONTROLLER_ONLY:
900 iop13xx_atux_pmmr_offset = IOP13XX_ATU0_PMMR_OFFSET;
901 iop13xx_atue_pmmr_offset = IOP13XX_ATU2_PMMR_OFFSET;
902 break;
903 /* IOP13XX_CONTROLLER_ONLY = asserted
904 * IOP13XX_INTERFACE_SEL_PCIX = deasserted
905 */
906 case IOP13XX_INTERFACE_SEL_PCIX:
907 iop13xx_atux_pmmr_offset = IOP13XX_ATU1_PMMR_OFFSET;
908 iop13xx_atue_pmmr_offset = IOP13XX_ATU2_PMMR_OFFSET;
909 break;
910 /* both deasserted */
911 case IOP13XX_CONTROLLER_ONLY | IOP13XX_INTERFACE_SEL_PCIX:
912 iop13xx_atux_pmmr_offset = IOP13XX_ATU2_PMMR_OFFSET;
913 iop13xx_atue_pmmr_offset = IOP13XX_ATU0_PMMR_OFFSET;
914 break;
915 default:
916 BUG();
917 }
918 }
919
iop13xx_atu_select(struct hw_pci * plat_pci)920 void __init iop13xx_atu_select(struct hw_pci *plat_pci)
921 {
922 int i;
923
924 /* set system defaults
925 * note: if "iop13xx_init_atu=" is specified this autodetect
926 * sequence will be bypassed
927 */
928 if (init_atu == IOP13XX_INIT_ATU_DEFAULT) {
929 /* check for single/dual interface */
930 if (__raw_readl(IOP13XX_ESSR0) & IOP13XX_INTERFACE_SEL_PCIX) {
931 /* ATUE must be present check the device id
932 * to see if ATUX is present.
933 */
934 init_atu |= IOP13XX_INIT_ATU_ATUE;
935 switch (__raw_readw(IOP13XX_ATUE_DID) & 0xf0) {
936 case 0x70:
937 case 0x80:
938 case 0xc0:
939 init_atu |= IOP13XX_INIT_ATU_ATUX;
940 break;
941 }
942 } else {
943 /* ATUX must be present check the device id
944 * to see if ATUE is present.
945 */
946 init_atu |= IOP13XX_INIT_ATU_ATUX;
947 switch (__raw_readw(IOP13XX_ATUX_DID) & 0xf0) {
948 case 0x70:
949 case 0x80:
950 case 0xc0:
951 init_atu |= IOP13XX_INIT_ATU_ATUE;
952 break;
953 }
954 }
955
956 /* check central resource and root complex capability */
957 if (init_atu & IOP13XX_INIT_ATU_ATUX)
958 if (!(__raw_readl(IOP13XX_ATUX_PCSR) &
959 IOP13XX_ATUX_PCSR_CENTRAL_RES))
960 init_atu &= ~IOP13XX_INIT_ATU_ATUX;
961
962 if (init_atu & IOP13XX_INIT_ATU_ATUE)
963 if (__raw_readl(IOP13XX_ATUE_PCSR) &
964 IOP13XX_ATUE_PCSR_END_POINT)
965 init_atu &= ~IOP13XX_INIT_ATU_ATUE;
966 }
967
968 for (i = 0; i < 2; i++) {
969 if((init_atu & (1 << i)) == (1 << i))
970 plat_pci->nr_controllers++;
971 }
972 }
973
iop13xx_pci_init(void)974 void __init iop13xx_pci_init(void)
975 {
976 /* clear pre-existing south bridge errors */
977 __raw_writel(__raw_readl(IOP13XX_XBG_BECSR) & 3, IOP13XX_XBG_BECSR);
978
979 /* Setup the Min Address for PCI memory... */
980 pcibios_min_mem = IOP13XX_PCIX_LOWER_MEM_BA;
981
982 /* if Linux is given control of an ATU
983 * clear out its prior configuration,
984 * otherwise do not touch the registers
985 */
986 if (init_atu & IOP13XX_INIT_ATU_ATUE) {
987 iop13xx_atue_disable();
988 iop13xx_atue_setup();
989 }
990
991 if (init_atu & IOP13XX_INIT_ATU_ATUX) {
992 iop13xx_atux_disable();
993 iop13xx_atux_setup();
994 }
995
996 hook_fault_code(16+6, iop13xx_pci_abort, SIGBUS, 0,
997 "imprecise external abort");
998 }
999
1000 /* initialize the pci memory space. handle any combination of
1001 * atue and atux enabled/disabled
1002 */
iop13xx_pci_setup(int nr,struct pci_sys_data * sys)1003 int iop13xx_pci_setup(int nr, struct pci_sys_data *sys)
1004 {
1005 struct resource *res;
1006 int which_atu;
1007 u32 pcixsr, pcsr;
1008
1009 if (nr > 1)
1010 return 0;
1011
1012 res = kzalloc(sizeof(struct resource), GFP_KERNEL);
1013 if (!res)
1014 panic("PCI: unable to alloc resources");
1015
1016
1017 /* 'nr' assumptions:
1018 * ATUX is always 0
1019 * ATUE is 1 when ATUX is also enabled
1020 * ATUE is 0 when ATUX is disabled
1021 */
1022 switch(init_atu) {
1023 case IOP13XX_INIT_ATU_ATUX:
1024 which_atu = nr ? 0 : IOP13XX_INIT_ATU_ATUX;
1025 break;
1026 case IOP13XX_INIT_ATU_ATUE:
1027 which_atu = nr ? 0 : IOP13XX_INIT_ATU_ATUE;
1028 break;
1029 case (IOP13XX_INIT_ATU_ATUX | IOP13XX_INIT_ATU_ATUE):
1030 which_atu = nr ? IOP13XX_INIT_ATU_ATUE : IOP13XX_INIT_ATU_ATUX;
1031 break;
1032 default:
1033 which_atu = 0;
1034 }
1035
1036 if (!which_atu) {
1037 kfree(res);
1038 return 0;
1039 }
1040
1041 switch(which_atu) {
1042 case IOP13XX_INIT_ATU_ATUX:
1043 pcixsr = __raw_readl(IOP13XX_ATUX_PCIXSR);
1044 pcixsr &= ~0xffff;
1045 pcixsr |= sys->busnr << IOP13XX_ATUX_PCIXSR_BUS_NUM |
1046 0 << IOP13XX_ATUX_PCIXSR_DEV_NUM |
1047 iop13xx_atu_function(IOP13XX_INIT_ATU_ATUX)
1048 << IOP13XX_ATUX_PCIXSR_FUNC_NUM;
1049 __raw_writel(pcixsr, IOP13XX_ATUX_PCIXSR);
1050
1051 pci_ioremap_io(0, IOP13XX_PCIX_LOWER_IO_PA);
1052
1053 res->start = IOP13XX_PCIX_LOWER_MEM_RA;
1054 res->end = IOP13XX_PCIX_UPPER_MEM_RA;
1055 res->name = "IQ81340 ATUX PCI Memory Space";
1056 res->flags = IORESOURCE_MEM;
1057 sys->mem_offset = IOP13XX_PCIX_MEM_OFFSET;
1058 break;
1059 case IOP13XX_INIT_ATU_ATUE:
1060 /* Note: the function number field in the PCSR is ro */
1061 pcsr = __raw_readl(IOP13XX_ATUE_PCSR);
1062 pcsr &= ~(0xfff8 << 16);
1063 pcsr |= sys->busnr << IOP13XX_ATUE_PCSR_BUS_NUM |
1064 0 << IOP13XX_ATUE_PCSR_DEV_NUM;
1065
1066 __raw_writel(pcsr, IOP13XX_ATUE_PCSR);
1067
1068 pci_ioremap_io(SZ_64K, IOP13XX_PCIE_LOWER_IO_PA);
1069
1070 res->start = IOP13XX_PCIE_LOWER_MEM_RA;
1071 res->end = IOP13XX_PCIE_UPPER_MEM_RA;
1072 res->name = "IQ81340 ATUE PCI Memory Space";
1073 res->flags = IORESOURCE_MEM;
1074 sys->mem_offset = IOP13XX_PCIE_MEM_OFFSET;
1075 sys->map_irq = iop13xx_pcie_map_irq;
1076 break;
1077 default:
1078 kfree(res);
1079 return 0;
1080 }
1081
1082 request_resource(&iomem_resource, res);
1083
1084 pci_add_resource_offset(&sys->resources, res, sys->mem_offset);
1085
1086 return 1;
1087 }
1088
iop13xx_dev_id(void)1089 u16 iop13xx_dev_id(void)
1090 {
1091 if (__raw_readl(IOP13XX_ESSR0) & IOP13XX_INTERFACE_SEL_PCIX)
1092 return __raw_readw(IOP13XX_ATUE_DID);
1093 else
1094 return __raw_readw(IOP13XX_ATUX_DID);
1095 }
1096
iop13xx_init_atu_setup(char * str)1097 static int __init iop13xx_init_atu_setup(char *str)
1098 {
1099 init_atu = IOP13XX_INIT_ATU_NONE;
1100 if (str) {
1101 while (*str != '\0') {
1102 switch (*str) {
1103 case 'x':
1104 case 'X':
1105 init_atu |= IOP13XX_INIT_ATU_ATUX;
1106 init_atu &= ~IOP13XX_INIT_ATU_NONE;
1107 break;
1108 case 'e':
1109 case 'E':
1110 init_atu |= IOP13XX_INIT_ATU_ATUE;
1111 init_atu &= ~IOP13XX_INIT_ATU_NONE;
1112 break;
1113 case ',':
1114 case '=':
1115 break;
1116 default:
1117 PRINTK("\"iop13xx_init_atu\" malformed at "
1118 "character: \'%c\'", *str);
1119 *(str + 1) = '\0';
1120 init_atu = IOP13XX_INIT_ATU_DEFAULT;
1121 }
1122 str++;
1123 }
1124 }
1125 return 1;
1126 }
1127
1128 __setup("iop13xx_init_atu", iop13xx_init_atu_setup);
1129