Lines Matching refs:is

31 The main webpage for the Philips driver is at the address above. It contains
37 is completely optional.
41 microphone is supported through the USB Audio class.
59    the cam is a bit slow or momentarily busy. However, on slow machines it
60    only introduces lag, so choose carefully. The default is 3, which is
64    This is an integer between 1 and 10. It will tell the module the number of
66    The default is 2, which is adequate for most applications (double
72    slack when your program is behind. But you need a multi-threaded or
75    The absolute maximum is 10, but don't set it too high!  Every buffer takes
77    something more than 4 is an absolute waste.  This memory is only
78    allocated during open(), so nothing is wasted when the camera is not in
82    When power_save is enabled (set to 1), the module will try to shut down
87    default this option is disabled.
93      0 = prefer uncompressed images; if the requested mode is not available
101    introduce some unwanted artefacts. The default is 2, medium compression.
112    this is let the LED blink while the camera is in use. This:
122    By default the camera's LED is on solid while in use, and turned off
123    when the camera is not used anymore.
126    750) and OEMs. For other cameras this command is silently ignored, and
133    A long standing problem with USB devices is their dynamic nature: you
138    should use with a specific camera. This is also handy if you have two
141    A camera is specified by its type (the number from the camera model,
150    would be rather pointless). The serialnumber is separated from the type
153    This somewhat cryptic syntax is best explained by a few examples:
175    - If a device node is already occupied, registration will fail and
176      the webcam is not available.
184    In order to better detect problems, it is now possible to turn on a
188    The trace variable is a bitmask; each bit represents a certain feature.
215    The default value for trace is 35 (0x23).
226 size and fps only specify defaults when you open() the device; this is to
229 defaults is QCIF size at 10 fps.
231 The compression parameter is semiglobal; it sets the initial compression