Lines Matching refs:serial_out
288 serial_out(up, UART_DLL, value & 0xff); in default_serial_dl_write()
289 serial_out(up, UART_DLM, value >> 8 & 0xff); in default_serial_dl_write()
425 p->serial_out = hub6_serial_out; in set_io_from_upio()
430 p->serial_out = mem_serial_out; in set_io_from_upio()
435 p->serial_out = mem32_serial_out; in set_io_from_upio()
440 p->serial_out = mem32be_serial_out; in set_io_from_upio()
446 p->serial_out = au_serial_out; in set_io_from_upio()
454 p->serial_out = io_serial_out; in set_io_from_upio()
470 p->serial_out(p, offset, value); in serial_port_out_sync()
474 p->serial_out(p, offset, value); in serial_port_out_sync()
483 serial_out(up, UART_SCR, offset); in serial_icr_write()
484 serial_out(up, UART_ICR, value); in serial_icr_write()
492 serial_out(up, UART_SCR, offset); in serial_icr_read()
505 serial_out(p, UART_FCR, UART_FCR_ENABLE_FIFO); in serial8250_clear_fifos()
506 serial_out(p, UART_FCR, UART_FCR_ENABLE_FIFO | in serial8250_clear_fifos()
508 serial_out(p, UART_FCR, 0); in serial8250_clear_fifos()
515 serial_out(p, UART_FCR, p->fcr); in serial8250_clear_and_reinit_fifos()
586 serial_out(p, UART_EXAR_SLEEP, sleep ? 0xff : 0); in serial8250_set_sleep()
594 serial_out(p, UART_LCR, UART_LCR_CONF_MODE_B); in serial8250_set_sleep()
595 serial_out(p, UART_EFR, UART_EFR_ECB); in serial8250_set_sleep()
596 serial_out(p, UART_LCR, 0); in serial8250_set_sleep()
598 serial_out(p, UART_IER, sleep ? UART_IERX_SLEEP : 0); in serial8250_set_sleep()
600 serial_out(p, UART_LCR, UART_LCR_CONF_MODE_B); in serial8250_set_sleep()
601 serial_out(p, UART_EFR, efr); in serial8250_set_sleep()
602 serial_out(p, UART_LCR, lcr); in serial8250_set_sleep()
623 serial_out(up, UART_RSA_MSR, mode | UART_RSA_MSR_FIFO); in __enable_rsa()
643 serial_out(up, UART_RSA_FRR, 0); in enable_rsa()
666 serial_out(up, UART_RSA_MSR, mode & ~UART_RSA_MSR_FIFO); in disable_rsa()
689 serial_out(up, UART_LCR, 0); in size_fifo()
692 serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO | in size_fifo()
694 serial_out(up, UART_MCR, UART_MCR_LOOP); in size_fifo()
695 serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A); in size_fifo()
698 serial_out(up, UART_LCR, 0x03); in size_fifo()
700 serial_out(up, UART_TX, count); in size_fifo()
705 serial_out(up, UART_FCR, old_fcr); in size_fifo()
706 serial_out(up, UART_MCR, old_mcr); in size_fifo()
707 serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A); in size_fifo()
709 serial_out(up, UART_LCR, old_lcr); in size_fifo()
725 serial_out(p, UART_LCR, UART_LCR_CONF_MODE_A); in autoconfig_read_divisor_id()
731 serial_out(p, UART_LCR, old_lcr); in autoconfig_read_divisor_id()
773 serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); in autoconfig_has_efr()
774 serial_out(up, UART_EFR, UART_EFR_ECB); in autoconfig_has_efr()
775 serial_out(up, UART_LCR, 0x00); in autoconfig_has_efr()
841 serial_out(up, UART_SCR, 0xa5); in autoconfig_8250()
843 serial_out(up, UART_SCR, 0x5a); in autoconfig_8250()
845 serial_out(up, UART_SCR, scratch); in autoconfig_8250()
903 serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A); in autoconfig_16550a()
905 serial_out(up, UART_EFR, 0xA8); in autoconfig_16550a()
911 serial_out(up, UART_LCR, 0); in autoconfig_16550a()
912 serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO | in autoconfig_16550a()
915 serial_out(up, UART_FCR, 0); in autoconfig_16550a()
916 serial_out(up, UART_LCR, 0); in autoconfig_16550a()
923 serial_out(up, UART_EFR, 0); in autoconfig_16550a()
931 serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); in autoconfig_16550a()
945 serial_out(up, UART_LCR, 0); in autoconfig_16550a()
947 serial_out(up, UART_LCR, 0xE0); in autoconfig_16550a()
951 serial_out(up, UART_LCR, 0); in autoconfig_16550a()
952 serial_out(up, UART_MCR, status1 ^ UART_MCR_LOOP); in autoconfig_16550a()
953 serial_out(up, UART_LCR, 0xE0); in autoconfig_16550a()
955 serial_out(up, UART_LCR, 0); in autoconfig_16550a()
956 serial_out(up, UART_MCR, status1); in autoconfig_16550a()
961 serial_out(up, UART_LCR, 0xE0); in autoconfig_16550a()
969 serial_out(up, UART_LCR, 0); in autoconfig_16550a()
984 serial_out(up, UART_LCR, 0); in autoconfig_16550a()
985 serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE); in autoconfig_16550a()
987 serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO); in autoconfig_16550a()
988 serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A); in autoconfig_16550a()
989 serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE); in autoconfig_16550a()
991 serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO); in autoconfig_16550a()
992 serial_out(up, UART_LCR, 0); in autoconfig_16550a()
1011 serial_out(up, UART_IER, iersave & ~UART_IER_UUE); in autoconfig_16550a()
1017 serial_out(up, UART_IER, iersave | UART_IER_UUE); in autoconfig_16550a()
1035 serial_out(up, UART_IER, iersave); in autoconfig_16550a()
1104 serial_out(up, UART_IER, 0); in autoconfig()
1113 serial_out(up, UART_IER, 0x0F); in autoconfig()
1118 serial_out(up, UART_IER, scratch); in autoconfig()
1143 serial_out(up, UART_MCR, UART_MCR_LOOP | 0x0A); in autoconfig()
1145 serial_out(up, UART_MCR, save_mcr); in autoconfig()
1163 serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); in autoconfig()
1164 serial_out(up, UART_EFR, 0); in autoconfig()
1165 serial_out(up, UART_LCR, 0); in autoconfig()
1167 serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO); in autoconfig()
1196 serial_out(up, UART_LCR, save_lcr); in autoconfig()
1211 serial_out(up, UART_RSA_FRR, 0); in autoconfig()
1213 serial_out(up, UART_MCR, save_mcr); in autoconfig()
1217 serial_out(up, UART_IER, UART_IER_UUE); in autoconfig()
1219 serial_out(up, UART_IER, 0); in autoconfig()
1257 serial_out(up, UART_MCR, UART_MCR_OUT1 | UART_MCR_OUT2); in autoconfig_irq()
1260 serial_out(up, UART_MCR, 0); in autoconfig_irq()
1263 serial_out(up, UART_MCR, in autoconfig_irq()
1266 serial_out(up, UART_MCR, in autoconfig_irq()
1269 serial_out(up, UART_IER, 0x0f); /* enable all intrs */ in autoconfig_irq()
1274 serial_out(up, UART_TX, 0xFF); in autoconfig_irq()
1278 serial_out(up, UART_MCR, save_mcr); in autoconfig_irq()
1279 serial_out(up, UART_IER, save_ier); in autoconfig_irq()
1294 serial_out(p, UART_IER, p->ier); in __stop_tx()
1484 serial_out(up, UART_TX, port->x_char); in serial8250_tx_chars()
1500 serial_out(up, UART_TX, xmit->buf[xmit->tail]); in serial8250_tx_chars()
1897 serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); in serial8250_do_startup()
2625 serial_out(up, UART_FCR, up->fcr); in do_set_rxtrig()