• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1#
2# Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
3#
4# This program is free software; you can redistribute it and/or modify
5# it under the terms of the GNU General Public License version 2 as
6# published by the Free Software Foundation.
7#
8
9config ARC
10	def_bool y
11	select ARCH_SUPPORTS_ATOMIC_RMW if ARC_HAS_LLSC
12	select BUILDTIME_EXTABLE_SORT
13	select COMMON_CLK
14	select CLONE_BACKWARDS
15	# ARC Busybox based initramfs absolutely relies on DEVTMPFS for /dev
16	select DEVTMPFS if !INITRAMFS_SOURCE=""
17	select GENERIC_ATOMIC64
18	select GENERIC_CLOCKEVENTS
19	select GENERIC_FIND_FIRST_BIT
20	# for now, we don't need GENERIC_IRQ_PROBE, CONFIG_GENERIC_IRQ_CHIP
21	select GENERIC_IRQ_SHOW
22	select GENERIC_PENDING_IRQ if SMP
23	select GENERIC_SMP_IDLE_THREAD
24	select HAVE_ARCH_KGDB
25	select HAVE_ARCH_TRACEHOOK
26	select HAVE_FUTEX_CMPXCHG if FUTEX
27	select HAVE_IOREMAP_PROT
28	select HAVE_KPROBES
29	select HAVE_KRETPROBES
30	select HAVE_MEMBLOCK
31	select HAVE_MOD_ARCH_SPECIFIC if ARC_DW2_UNWIND
32	select HAVE_OPROFILE
33	select HAVE_PERF_EVENTS
34	select IRQ_DOMAIN
35	select MODULES_USE_ELF_RELA
36	select NO_BOOTMEM
37	select OF
38	select OF_EARLY_FLATTREE
39	select PERF_USE_VMALLOC
40	select HAVE_DEBUG_STACKOVERFLOW
41
42config TRACE_IRQFLAGS_SUPPORT
43	def_bool y
44
45config LOCKDEP_SUPPORT
46	def_bool y
47
48config SCHED_OMIT_FRAME_POINTER
49	def_bool y
50
51config GENERIC_CSUM
52	def_bool y
53
54config RWSEM_GENERIC_SPINLOCK
55	def_bool y
56
57config ARCH_FLATMEM_ENABLE
58	def_bool y
59
60config MMU
61	def_bool y
62
63config NO_IOPORT_MAP
64	def_bool y
65
66config GENERIC_CALIBRATE_DELAY
67	def_bool y
68
69config GENERIC_HWEIGHT
70	def_bool y
71
72config STACKTRACE_SUPPORT
73	def_bool y
74	select STACKTRACE
75
76config HAVE_LATENCYTOP_SUPPORT
77	def_bool y
78
79config HAVE_ARCH_TRANSPARENT_HUGEPAGE
80	def_bool y
81	depends on ARC_MMU_V4
82
83source "init/Kconfig"
84source "kernel/Kconfig.freezer"
85
86menu "ARC Architecture Configuration"
87
88menu "ARC Platform/SoC/Board"
89
90source "arch/arc/plat-sim/Kconfig"
91source "arch/arc/plat-tb10x/Kconfig"
92source "arch/arc/plat-axs10x/Kconfig"
93#New platform adds here
94
95endmenu
96
97choice
98	prompt "ARC Instruction Set"
99	default ISA_ARCV2
100
101config ISA_ARCOMPACT
102	bool "ARCompact ISA"
103	help
104	  The original ARC ISA of ARC600/700 cores
105
106config ISA_ARCV2
107	bool "ARC ISA v2"
108	help
109	  ISA for the Next Generation ARC-HS cores
110
111endchoice
112
113menu "ARC CPU Configuration"
114
115choice
116	prompt "ARC Core"
117	default ARC_CPU_770 if ISA_ARCOMPACT
118	default ARC_CPU_HS if ISA_ARCV2
119
120if ISA_ARCOMPACT
121
122config ARC_CPU_750D
123	bool "ARC750D"
124	select ARC_CANT_LLSC
125	help
126	  Support for ARC750 core
127
128config ARC_CPU_770
129	bool "ARC770"
130	select ARC_HAS_SWAPE
131	help
132	  Support for ARC770 core introduced with Rel 4.10 (Summer 2011)
133	  This core has a bunch of cool new features:
134	  -MMU-v3: Variable Page Sz (4k, 8k, 16k), bigger J-TLB (128x4)
135                   Shared Address Spaces (for sharing TLB entires in MMU)
136	  -Caches: New Prog Model, Region Flush
137	  -Insns: endian swap, load-locked/store-conditional, time-stamp-ctr
138
139endif	#ISA_ARCOMPACT
140
141config ARC_CPU_HS
142	bool "ARC-HS"
143	depends on ISA_ARCV2
144	help
145	  Support for ARC HS38x Cores based on ARCv2 ISA
146	  The notable features are:
147	    - SMP configurations of upto 4 core with coherency
148	    - Optional L2 Cache and IO-Coherency
149	    - Revised Interrupt Architecture (multiple priorites, reg banks,
150	        auto stack switch, auto regfile save/restore)
151	    - MMUv4 (PIPT dcache, Huge Pages)
152	    - Instructions for
153		* 64bit load/store: LDD, STD
154		* Hardware assisted divide/remainder: DIV, REM
155		* Function prologue/epilogue: ENTER_S, LEAVE_S
156		* IRQ enable/disable: CLRI, SETI
157		* pop count: FFS, FLS
158		* SETcc, BMSKN, XBFU...
159
160endchoice
161
162config CPU_BIG_ENDIAN
163	bool "Enable Big Endian Mode"
164	default n
165	help
166	  Build kernel for Big Endian Mode of ARC CPU
167
168config SMP
169	bool "Symmetric Multi-Processing"
170	default n
171	select ARC_HAS_COH_CACHES if ISA_ARCV2
172	select ARC_MCIP if ISA_ARCV2
173	help
174	  This enables support for systems with more than one CPU.
175
176if SMP
177
178config ARC_HAS_COH_CACHES
179	def_bool n
180
181config ARC_HAS_REENTRANT_IRQ_LV2
182	def_bool n
183
184config ARC_MCIP
185	bool "ARConnect Multicore IP (MCIP) Support "
186	depends on ISA_ARCV2
187	help
188	  This IP block enables SMP in ARC-HS38 cores.
189	  It provides for cross-core interrupts, multi-core debug
190	  hardware semaphores, shared memory,....
191
192config NR_CPUS
193	int "Maximum number of CPUs (2-4096)"
194	range 2 4096
195	default "4"
196
197config ARC_SMP_HALT_ON_RESET
198	bool "Enable Halt-on-reset boot mode"
199	default y if ARC_UBOOT_SUPPORT
200	help
201	  In SMP configuration cores can be configured as Halt-on-reset
202	  or they could all start at same time. For Halt-on-reset, non
203	  masters are parked until Master kicks them so they can start of
204	  at designated entry point. For other case, all jump to common
205	  entry point and spin wait for Master's signal.
206
207endif	#SMP
208
209menuconfig ARC_CACHE
210	bool "Enable Cache Support"
211	default y
212	# if SMP, cache enabled ONLY if ARC implementation has cache coherency
213	depends on !SMP || ARC_HAS_COH_CACHES
214
215if ARC_CACHE
216
217config ARC_CACHE_LINE_SHIFT
218	int "Cache Line Length (as power of 2)"
219	range 5 7
220	default "6"
221	help
222	  Starting with ARC700 4.9, Cache line length is configurable,
223	  This option specifies "N", with Line-len = 2 power N
224	  So line lengths of 32, 64, 128 are specified by 5,6,7, respectively
225	  Linux only supports same line lengths for I and D caches.
226
227config ARC_HAS_ICACHE
228	bool "Use Instruction Cache"
229	default y
230
231config ARC_HAS_DCACHE
232	bool "Use Data Cache"
233	default y
234
235config ARC_CACHE_PAGES
236	bool "Per Page Cache Control"
237	default y
238	depends on ARC_HAS_ICACHE || ARC_HAS_DCACHE
239	help
240	  This can be used to over-ride the global I/D Cache Enable on a
241	  per-page basis (but only for pages accessed via MMU such as
242	  Kernel Virtual address or User Virtual Address)
243	  TLB entries have a per-page Cache Enable Bit.
244	  Note that Global I/D ENABLE + Per Page DISABLE works but corollary
245	  Global DISABLE + Per Page ENABLE won't work
246
247config ARC_CACHE_VIPT_ALIASING
248	bool "Support VIPT Aliasing D$"
249	depends on ARC_HAS_DCACHE && ISA_ARCOMPACT
250	default n
251
252endif	#ARC_CACHE
253
254config ARC_HAS_ICCM
255	bool "Use ICCM"
256	help
257	  Single Cycle RAMS to store Fast Path Code
258	default n
259
260config ARC_ICCM_SZ
261	int "ICCM Size in KB"
262	default "64"
263	depends on ARC_HAS_ICCM
264
265config ARC_HAS_DCCM
266	bool "Use DCCM"
267	help
268	  Single Cycle RAMS to store Fast Path Data
269	default n
270
271config ARC_DCCM_SZ
272	int "DCCM Size in KB"
273	default "64"
274	depends on ARC_HAS_DCCM
275
276config ARC_DCCM_BASE
277	hex "DCCM map address"
278	default "0xA0000000"
279	depends on ARC_HAS_DCCM
280
281choice
282	prompt "MMU Version"
283	default ARC_MMU_V3 if ARC_CPU_770
284	default ARC_MMU_V2 if ARC_CPU_750D
285	default ARC_MMU_V4 if ARC_CPU_HS
286
287if ISA_ARCOMPACT
288
289config ARC_MMU_V1
290	bool "MMU v1"
291	help
292	  Orig ARC700 MMU
293
294config ARC_MMU_V2
295	bool "MMU v2"
296	help
297	  Fixed the deficiency of v1 - possible thrashing in memcpy sceanrio
298	  when 2 D-TLB and 1 I-TLB entries index into same 2way set.
299
300config ARC_MMU_V3
301	bool "MMU v3"
302	depends on ARC_CPU_770
303	help
304	  Introduced with ARC700 4.10: New Features
305	  Variable Page size (1k-16k), var JTLB size 128 x (2 or 4)
306	  Shared Address Spaces (SASID)
307
308endif
309
310config ARC_MMU_V4
311	bool "MMU v4"
312	depends on ISA_ARCV2
313
314endchoice
315
316
317choice
318	prompt "MMU Page Size"
319	default ARC_PAGE_SIZE_8K
320
321config ARC_PAGE_SIZE_8K
322	bool "8KB"
323	help
324	  Choose between 8k vs 16k
325
326config ARC_PAGE_SIZE_16K
327	bool "16KB"
328	depends on ARC_MMU_V3 || ARC_MMU_V4
329
330config ARC_PAGE_SIZE_4K
331	bool "4KB"
332	depends on ARC_MMU_V3 || ARC_MMU_V4
333
334endchoice
335
336if ISA_ARCOMPACT
337
338config ARC_COMPACT_IRQ_LEVELS
339	bool "ARCompact IRQ Priorities: High(2)/Low(1)"
340	default n
341	# Timer HAS to be high priority, for any other high priority config
342	select ARC_IRQ3_LV2
343	# if SMP, LV2 enabled ONLY if ARC implementation has LV2 re-entrancy
344	depends on !SMP || ARC_HAS_REENTRANT_IRQ_LV2
345
346if ARC_COMPACT_IRQ_LEVELS
347
348config ARC_IRQ3_LV2
349	bool
350
351config ARC_IRQ5_LV2
352	bool
353
354config ARC_IRQ6_LV2
355	bool
356
357endif	#ARC_COMPACT_IRQ_LEVELS
358
359config ARC_FPU_SAVE_RESTORE
360	bool "Enable FPU state persistence across context switch"
361	default n
362	help
363	  Double Precision Floating Point unit had dedictaed regs which
364	  need to be saved/restored across context-switch.
365	  Note that ARC FPU is overly simplistic, unlike say x86, which has
366	  hardware pieces to allow software to conditionally save/restore,
367	  based on actual usage of FPU by a task. Thus our implemn does
368	  this for all tasks in system.
369
370endif	#ISA_ARCOMPACT
371
372config ARC_CANT_LLSC
373	def_bool n
374
375config ARC_HAS_LLSC
376	bool "Insn: LLOCK/SCOND (efficient atomic ops)"
377	default y
378	depends on !ARC_CANT_LLSC
379
380config ARC_STAR_9000923308
381	bool "Workaround for llock/scond livelock"
382	default n
383	depends on ISA_ARCV2 && SMP && ARC_HAS_LLSC
384
385config ARC_HAS_SWAPE
386	bool "Insn: SWAPE (endian-swap)"
387	default y
388
389if ISA_ARCV2
390
391config ARC_HAS_LL64
392	bool "Insn: 64bit LDD/STD"
393	help
394	  Enable gcc to generate 64-bit load/store instructions
395	  ISA mandates even/odd registers to allow encoding of two
396	  dest operands with 2 possible source operands.
397	default y
398
399config ARC_HAS_DIV_REM
400	bool "Insn: div, divu, rem, remu"
401	default y
402
403config ARC_HAS_RTC
404	bool "Local 64-bit r/o cycle counter"
405	default n
406	depends on !SMP
407
408config ARC_HAS_GRTC
409	bool "SMP synchronized 64-bit cycle counter"
410	default y
411	depends on SMP
412
413config ARC_NUMBER_OF_INTERRUPTS
414	int "Number of interrupts"
415	range 8 240
416	default 32
417	help
418	  This defines the number of interrupts on the ARCv2HS core.
419	  It affects the size of vector table.
420	  The initial 8 IRQs are fixed (Timer, ICI etc) and although configurable
421	  in hardware, it keep things simple for Linux to assume they are always
422	  present.
423
424endif	# ISA_ARCV2
425
426endmenu   # "ARC CPU Configuration"
427
428config LINUX_LINK_BASE
429	hex "Linux Link Address"
430	default "0x80000000"
431	help
432	  ARC700 divides the 32 bit phy address space into two equal halves
433	  -Lower 2G (0 - 0x7FFF_FFFF ) is user virtual, translated by MMU
434	  -Upper 2G (0x8000_0000 onwards) is untranslated, for kernel
435	  Typically Linux kernel is linked at the start of untransalted addr,
436	  hence the default value of 0x8zs.
437	  However some customers have peripherals mapped at this addr, so
438	  Linux needs to be scooted a bit.
439	  If you don't know what the above means, leave this setting alone.
440	  This needs to match memory start address specified in Device Tree
441
442config HIGHMEM
443	bool "High Memory Support"
444	help
445	  With ARC 2G:2G address split, only upper 2G is directly addressable by
446	  kernel. Enable this to potentially allow access to rest of 2G and PAE
447	  in future
448
449config ARC_HAS_PAE40
450	bool "Support for the 40-bit Physical Address Extension"
451	default n
452	depends on ISA_ARCV2
453	select HIGHMEM
454	help
455	  Enable access to physical memory beyond 4G, only supported on
456	  ARC cores with 40 bit Physical Addressing support
457
458config ARCH_PHYS_ADDR_T_64BIT
459	def_bool ARC_HAS_PAE40
460
461config ARCH_DMA_ADDR_T_64BIT
462	bool
463
464config ARC_CURR_IN_REG
465	bool "Dedicate Register r25 for current_task pointer"
466	default y
467	help
468	  This reserved Register R25 to point to Current Task in
469	  kernel mode. This saves memory access for each such access
470
471
472config ARC_EMUL_UNALIGNED
473	bool "Emulate unaligned memory access (userspace only)"
474	select SYSCTL_ARCH_UNALIGN_NO_WARN
475	select SYSCTL_ARCH_UNALIGN_ALLOW
476	depends on ISA_ARCOMPACT
477	help
478	  This enables misaligned 16 & 32 bit memory access from user space.
479	  Use ONLY-IF-ABS-NECESSARY as it will be very slow and also can hide
480	  potential bugs in code
481
482config HZ
483	int "Timer Frequency"
484	default 100
485
486config ARC_METAWARE_HLINK
487	bool "Support for Metaware debugger assisted Host access"
488	default n
489	help
490	  This options allows a Linux userland apps to directly access
491	  host file system (open/creat/read/write etc) with help from
492	  Metaware Debugger. This can come in handy for Linux-host communication
493	  when there is no real usable peripheral such as EMAC.
494
495menuconfig ARC_DBG
496	bool "ARC debugging"
497	default y
498
499if ARC_DBG
500
501config ARC_DW2_UNWIND
502	bool "Enable DWARF specific kernel stack unwind"
503	default y
504	select KALLSYMS
505	help
506	  Compiles the kernel with DWARF unwind information and can be used
507	  to get stack backtraces.
508
509	  If you say Y here the resulting kernel image will be slightly larger
510	  but not slower, and it will give very useful debugging information.
511	  If you don't debug the kernel, you can say N, but we may not be able
512	  to solve problems without frame unwind information
513
514config ARC_DBG_TLB_PARANOIA
515	bool "Paranoia Checks in Low Level TLB Handlers"
516	default n
517
518config ARC_DBG_TLB_MISS_COUNT
519	bool "Profile TLB Misses"
520	default n
521	select DEBUG_FS
522	help
523	  Counts number of I and D TLB Misses and exports them via Debugfs
524	  The counters can be cleared via Debugfs as well
525
526if SMP
527
528config ARC_IPI_DBG
529	bool "Debug Inter Core interrupts"
530	default n
531
532endif
533
534endif
535
536config ARC_UBOOT_SUPPORT
537	bool "Support uboot arg Handling"
538	default n
539	help
540	  ARC Linux by default checks for uboot provided args as pointers to
541	  external cmdline or DTB. This however breaks in absence of uboot,
542	  when booting from Metaware debugger directly, as the registers are
543	  not zeroed out on reset by mdb and/or ARCv2 based cores. The bogus
544	  registers look like uboot args to kernel which then chokes.
545	  So only enable the uboot arg checking/processing if users are sure
546	  of uboot being in play.
547
548config ARC_BUILTIN_DTB_NAME
549	string "Built in DTB"
550	help
551	  Set the name of the DTB to embed in the vmlinux binary
552	  Leaving it blank selects the minimal "skeleton" dtb
553
554source "kernel/Kconfig.preempt"
555
556menu "Executable file formats"
557source "fs/Kconfig.binfmt"
558endmenu
559
560endmenu	 # "ARC Architecture Configuration"
561
562source "mm/Kconfig"
563source "net/Kconfig"
564source "drivers/Kconfig"
565source "fs/Kconfig"
566source "arch/arc/Kconfig.debug"
567source "security/Kconfig"
568source "crypto/Kconfig"
569source "lib/Kconfig"
570source "kernel/power/Kconfig"
571