• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1 /*
2  * arch/arm/mach-omap1/pm.h
3  *
4  * Header file for OMAP1 Power Management Routines
5  *
6  * Author: MontaVista Software, Inc.
7  *	   support@mvista.com
8  *
9  * Copyright 2002 MontaVista Software Inc.
10  *
11  * Cleanup 2004 for Linux 2.6 by Dirk Behme <dirk.behme@de.bosch.com>
12  *
13  * This program is free software; you can redistribute it and/or modify it
14  * under the terms of the GNU General Public License as published by the
15  * Free Software Foundation; either version 2 of the License, or (at your
16  * option) any later version.
17  *
18  * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
19  * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
20  * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
21  * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
22  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
23  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
24  * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
25  * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
26  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
27  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
28  *
29  * You should have received a copy of the GNU General Public License along
30  * with this program; if not, write to the Free Software Foundation, Inc.,
31  * 675 Mass Ave, Cambridge, MA 02139, USA.
32  */
33 
34 #ifndef __ARCH_ARM_MACH_OMAP1_PM_H
35 #define __ARCH_ARM_MACH_OMAP1_PM_H
36 
37 /*
38  * ----------------------------------------------------------------------------
39  * Register and offset definitions to be used in PM assembler code
40  * ----------------------------------------------------------------------------
41  */
42 #define CLKGEN_REG_ASM_BASE		OMAP1_IO_ADDRESS(0xfffece00)
43 #define ARM_IDLECT1_ASM_OFFSET		0x04
44 #define ARM_IDLECT2_ASM_OFFSET		0x08
45 
46 #define TCMIF_ASM_BASE			OMAP1_IO_ADDRESS(0xfffecc00)
47 #define EMIFS_CONFIG_ASM_OFFSET		0x0c
48 #define EMIFF_SDRAM_CONFIG_ASM_OFFSET	0x20
49 
50 /*
51  * ----------------------------------------------------------------------------
52  * Power management bitmasks
53  * ----------------------------------------------------------------------------
54  */
55 #define IDLE_WAIT_CYCLES		0x00000fff
56 #define PERIPHERAL_ENABLE		0x2
57 
58 #define SELF_REFRESH_MODE		0x0c000001
59 #define IDLE_EMIFS_REQUEST		0xc
60 #define MODEM_32K_EN			0x1
61 #define PER_EN				0x1
62 
63 #define CPU_SUSPEND_SIZE		200
64 #define ULPD_LOW_PWR_EN			0x0001
65 #define ULPD_DEEP_SLEEP_TRANSITION_EN	0x0010
66 #define ULPD_SETUP_ANALOG_CELL_3_VAL	0
67 #define ULPD_POWER_CTRL_REG_VAL		0x0219
68 
69 #define DSP_IDLE_DELAY			10
70 #define DSP_IDLE			0x0040
71 #define DSP_RST				0x0004
72 #define DSP_ENABLE			0x0002
73 #define SUFFICIENT_DSP_RESET_TIME	1000
74 #define DEFAULT_MPUI_CONFIG		0x05cf
75 #define ENABLE_XORCLK			0x2
76 #define DSP_CLOCK_ENABLE		0x2000
77 #define DSP_IDLE_MODE			0x2
78 #define TC_IDLE_REQUEST			(0x0000000c)
79 
80 #define IRQ_LEVEL2			(1<<0)
81 #define IRQ_KEYBOARD			(1<<1)
82 #define IRQ_UART2			(1<<15)
83 
84 #define PDE_BIT				0x08
85 #define PWD_EN_BIT			0x04
86 #define EN_PERCK_BIT			0x04
87 
88 #define OMAP1510_DEEP_SLEEP_REQUEST	0x0ec7
89 #define OMAP1510_BIG_SLEEP_REQUEST	0x0cc5
90 #define OMAP1510_IDLE_LOOP_REQUEST	0x0c00
91 #define OMAP1510_IDLE_CLOCK_DOMAINS	0x2
92 
93 /* Both big sleep and deep sleep use same values. Difference is in ULPD. */
94 #define OMAP1610_IDLECT1_SLEEP_VAL	0x13c7
95 #define OMAP1610_IDLECT2_SLEEP_VAL	0x09c7
96 #define OMAP1610_IDLECT3_VAL		0x3f
97 #define OMAP1610_IDLECT3_SLEEP_ORMASK	0x2c
98 #define OMAP1610_IDLECT3		0xfffece24
99 #define OMAP1610_IDLE_LOOP_REQUEST	0x0400
100 
101 #define OMAP7XX_IDLECT1_SLEEP_VAL	0x16c7
102 #define OMAP7XX_IDLECT2_SLEEP_VAL	0x09c7
103 #define OMAP7XX_IDLECT3_VAL		0x3f
104 #define OMAP7XX_IDLECT3		0xfffece24
105 #define OMAP7XX_IDLE_LOOP_REQUEST	0x0C00
106 
107 #if     !defined(CONFIG_ARCH_OMAP730) && \
108 	!defined(CONFIG_ARCH_OMAP850) && \
109 	!defined(CONFIG_ARCH_OMAP15XX) && \
110 	!defined(CONFIG_ARCH_OMAP16XX)
111 #warning "Power management for this processor not implemented yet"
112 #endif
113 
114 #ifndef __ASSEMBLER__
115 
116 #include <linux/clk.h>
117 
118 extern struct kset power_subsys;
119 
120 extern void prevent_idle_sleep(void);
121 extern void allow_idle_sleep(void);
122 
123 extern void omap1_pm_idle(void);
124 extern void omap1_pm_suspend(void);
125 
126 extern void omap7xx_cpu_suspend(unsigned long, unsigned long);
127 extern void omap1510_cpu_suspend(unsigned long, unsigned long);
128 extern void omap1610_cpu_suspend(unsigned long, unsigned long);
129 extern void omap7xx_idle_loop_suspend(void);
130 extern void omap1510_idle_loop_suspend(void);
131 extern void omap1610_idle_loop_suspend(void);
132 
133 extern unsigned int omap7xx_cpu_suspend_sz;
134 extern unsigned int omap1510_cpu_suspend_sz;
135 extern unsigned int omap1610_cpu_suspend_sz;
136 extern unsigned int omap7xx_idle_loop_suspend_sz;
137 extern unsigned int omap1510_idle_loop_suspend_sz;
138 extern unsigned int omap1610_idle_loop_suspend_sz;
139 
140 #ifdef CONFIG_OMAP_SERIAL_WAKE
141 extern void omap_serial_wake_trigger(int enable);
142 #else
143 #define omap_serial_wakeup_init()	{}
144 #define omap_serial_wake_trigger(x)	{}
145 #endif	/* CONFIG_OMAP_SERIAL_WAKE */
146 
147 #define ARM_SAVE(x) arm_sleep_save[ARM_SLEEP_SAVE_##x] = omap_readl(x)
148 #define ARM_RESTORE(x) omap_writel((arm_sleep_save[ARM_SLEEP_SAVE_##x]), (x))
149 #define ARM_SHOW(x) arm_sleep_save[ARM_SLEEP_SAVE_##x]
150 
151 #define DSP_SAVE(x) dsp_sleep_save[DSP_SLEEP_SAVE_##x] = __raw_readw(x)
152 #define DSP_RESTORE(x) __raw_writew((dsp_sleep_save[DSP_SLEEP_SAVE_##x]), (x))
153 #define DSP_SHOW(x) dsp_sleep_save[DSP_SLEEP_SAVE_##x]
154 
155 #define ULPD_SAVE(x) ulpd_sleep_save[ULPD_SLEEP_SAVE_##x] = omap_readw(x)
156 #define ULPD_RESTORE(x) omap_writew((ulpd_sleep_save[ULPD_SLEEP_SAVE_##x]), (x))
157 #define ULPD_SHOW(x) ulpd_sleep_save[ULPD_SLEEP_SAVE_##x]
158 
159 #define MPUI7XX_SAVE(x) mpui7xx_sleep_save[MPUI7XX_SLEEP_SAVE_##x] = omap_readl(x)
160 #define MPUI7XX_RESTORE(x) omap_writel((mpui7xx_sleep_save[MPUI7XX_SLEEP_SAVE_##x]), (x))
161 #define MPUI7XX_SHOW(x) mpui7xx_sleep_save[MPUI7XX_SLEEP_SAVE_##x]
162 
163 #define MPUI1510_SAVE(x) mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x] = omap_readl(x)
164 #define MPUI1510_RESTORE(x) omap_writel((mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x]), (x))
165 #define MPUI1510_SHOW(x) mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x]
166 
167 #define MPUI1610_SAVE(x) mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_##x] = omap_readl(x)
168 #define MPUI1610_RESTORE(x) omap_writel((mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_##x]), (x))
169 #define MPUI1610_SHOW(x) mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_##x]
170 
171 /*
172  * List of global OMAP registers to preserve.
173  * More ones like CP and general purpose register values are preserved
174  * with the stack pointer in sleep.S.
175  */
176 
177 enum arm_save_state {
178 	ARM_SLEEP_SAVE_START = 0,
179 	/*
180 	 * MPU control registers 32 bits
181 	 */
182 	ARM_SLEEP_SAVE_ARM_CKCTL,
183 	ARM_SLEEP_SAVE_ARM_IDLECT1,
184 	ARM_SLEEP_SAVE_ARM_IDLECT2,
185 	ARM_SLEEP_SAVE_ARM_IDLECT3,
186 	ARM_SLEEP_SAVE_ARM_EWUPCT,
187 	ARM_SLEEP_SAVE_ARM_RSTCT1,
188 	ARM_SLEEP_SAVE_ARM_RSTCT2,
189 	ARM_SLEEP_SAVE_ARM_SYSST,
190 	ARM_SLEEP_SAVE_SIZE
191 };
192 
193 enum dsp_save_state {
194 	DSP_SLEEP_SAVE_START = 0,
195 	/*
196 	 * DSP registers 16 bits
197 	 */
198 	DSP_SLEEP_SAVE_DSP_IDLECT2,
199 	DSP_SLEEP_SAVE_SIZE
200 };
201 
202 enum ulpd_save_state {
203 	ULPD_SLEEP_SAVE_START = 0,
204 	/*
205 	 * ULPD registers 16 bits
206 	 */
207 	ULPD_SLEEP_SAVE_ULPD_IT_STATUS,
208 	ULPD_SLEEP_SAVE_ULPD_CLOCK_CTRL,
209 	ULPD_SLEEP_SAVE_ULPD_SOFT_REQ,
210 	ULPD_SLEEP_SAVE_ULPD_STATUS_REQ,
211 	ULPD_SLEEP_SAVE_ULPD_DPLL_CTRL,
212 	ULPD_SLEEP_SAVE_ULPD_POWER_CTRL,
213 	ULPD_SLEEP_SAVE_SIZE
214 };
215 
216 enum mpui1510_save_state {
217 	MPUI1510_SLEEP_SAVE_START = 0,
218 	/*
219 	 * MPUI registers 32 bits
220 	 */
221 	MPUI1510_SLEEP_SAVE_MPUI_CTRL,
222 	MPUI1510_SLEEP_SAVE_MPUI_DSP_BOOT_CONFIG,
223 	MPUI1510_SLEEP_SAVE_MPUI_DSP_API_CONFIG,
224 	MPUI1510_SLEEP_SAVE_MPUI_DSP_STATUS,
225 	MPUI1510_SLEEP_SAVE_EMIFF_SDRAM_CONFIG,
226 	MPUI1510_SLEEP_SAVE_EMIFS_CONFIG,
227 	MPUI1510_SLEEP_SAVE_OMAP_IH1_MIR,
228 	MPUI1510_SLEEP_SAVE_OMAP_IH2_MIR,
229 #if defined(CONFIG_ARCH_OMAP15XX)
230 	MPUI1510_SLEEP_SAVE_SIZE
231 #else
232 	MPUI1510_SLEEP_SAVE_SIZE = 0
233 #endif
234 };
235 
236 enum mpui7xx_save_state {
237 	MPUI7XX_SLEEP_SAVE_START = 0,
238 	/*
239 	 * MPUI registers 32 bits
240 	 */
241 	MPUI7XX_SLEEP_SAVE_MPUI_CTRL,
242 	MPUI7XX_SLEEP_SAVE_MPUI_DSP_BOOT_CONFIG,
243 	MPUI7XX_SLEEP_SAVE_MPUI_DSP_API_CONFIG,
244 	MPUI7XX_SLEEP_SAVE_MPUI_DSP_STATUS,
245 	MPUI7XX_SLEEP_SAVE_EMIFF_SDRAM_CONFIG,
246 	MPUI7XX_SLEEP_SAVE_EMIFS_CONFIG,
247 	MPUI7XX_SLEEP_SAVE_OMAP_IH1_MIR,
248 	MPUI7XX_SLEEP_SAVE_OMAP_IH2_0_MIR,
249 	MPUI7XX_SLEEP_SAVE_OMAP_IH2_1_MIR,
250 #if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
251 	MPUI7XX_SLEEP_SAVE_SIZE
252 #else
253 	MPUI7XX_SLEEP_SAVE_SIZE = 0
254 #endif
255 };
256 
257 enum mpui1610_save_state {
258 	MPUI1610_SLEEP_SAVE_START = 0,
259 	/*
260 	 * MPUI registers 32 bits
261 	 */
262 	MPUI1610_SLEEP_SAVE_MPUI_CTRL,
263 	MPUI1610_SLEEP_SAVE_MPUI_DSP_BOOT_CONFIG,
264 	MPUI1610_SLEEP_SAVE_MPUI_DSP_API_CONFIG,
265 	MPUI1610_SLEEP_SAVE_MPUI_DSP_STATUS,
266 	MPUI1610_SLEEP_SAVE_EMIFF_SDRAM_CONFIG,
267 	MPUI1610_SLEEP_SAVE_EMIFS_CONFIG,
268 	MPUI1610_SLEEP_SAVE_OMAP_IH1_MIR,
269 	MPUI1610_SLEEP_SAVE_OMAP_IH2_0_MIR,
270 	MPUI1610_SLEEP_SAVE_OMAP_IH2_1_MIR,
271 	MPUI1610_SLEEP_SAVE_OMAP_IH2_2_MIR,
272 	MPUI1610_SLEEP_SAVE_OMAP_IH2_3_MIR,
273 #if defined(CONFIG_ARCH_OMAP16XX)
274 	MPUI1610_SLEEP_SAVE_SIZE
275 #else
276 	MPUI1610_SLEEP_SAVE_SIZE = 0
277 #endif
278 };
279 
280 #endif /* ASSEMBLER */
281 #endif /* __ASM_ARCH_OMAP_PM_H */
282