1 #ifndef __ASM_SH_RENESAS_SH7785LCR_H 2 #define __ASM_SH_RENESAS_SH7785LCR_H 3 4 /* 5 * This board has 2 physical memory maps. 6 * It can be changed with DIP switch(S2-5). 7 * 8 * phys address | S2-5 = OFF | S2-5 = ON 9 * -----------------------------+---------------+--------------- 10 * 0x00000000 - 0x03ffffff(CS0) | NOR Flash | NOR Flash 11 * 0x04000000 - 0x05ffffff(CS1) | PLD | PLD 12 * 0x06000000 - 0x07ffffff(CS1) | I2C | I2C 13 * 0x08000000 - 0x0bffffff(CS2) | USB | DDR SDRAM 14 * 0x0c000000 - 0x0fffffff(CS3) | SD | DDR SDRAM 15 * 0x10000000 - 0x13ffffff(CS4) | SM107 | SM107 16 * 0x14000000 - 0x17ffffff(CS5) | reserved | USB 17 * 0x18000000 - 0x1bffffff(CS6) | reserved | SD 18 * 0x40000000 - 0x5fffffff | DDR SDRAM | (cannot use) 19 * 20 */ 21 22 #define NOR_FLASH_ADDR 0x00000000 23 #define NOR_FLASH_SIZE 0x04000000 24 25 #define PLD_BASE_ADDR 0x04000000 26 #define PLD_PCICR (PLD_BASE_ADDR + 0x00) 27 #define PLD_LCD_BK_CONTR (PLD_BASE_ADDR + 0x02) 28 #define PLD_LOCALCR (PLD_BASE_ADDR + 0x04) 29 #define PLD_POFCR (PLD_BASE_ADDR + 0x06) 30 #define PLD_LEDCR (PLD_BASE_ADDR + 0x08) 31 #define PLD_SWSR (PLD_BASE_ADDR + 0x0a) 32 #define PLD_VERSR (PLD_BASE_ADDR + 0x0c) 33 #define PLD_MMSR (PLD_BASE_ADDR + 0x0e) 34 35 #define PCA9564_ADDR 0x06000000 /* I2C */ 36 #define PCA9564_SIZE 0x00000100 37 38 #define PCA9564_PROTO_32BIT_ADDR 0x14000000 39 40 #define SM107_MEM_ADDR 0x10000000 41 #define SM107_MEM_SIZE 0x00e00000 42 #define SM107_REG_ADDR 0x13e00000 43 #define SM107_REG_SIZE 0x00200000 44 45 #if defined(CONFIG_SH_SH7785LCR_29BIT_PHYSMAPS) 46 #define R8A66597_ADDR 0x14000000 /* USB */ 47 #define CG200_ADDR 0x18000000 /* SD */ 48 #else 49 #define R8A66597_ADDR 0x08000000 50 #define CG200_ADDR 0x0c000000 51 #endif 52 53 #define R8A66597_SIZE 0x00000100 54 #define CG200_SIZE 0x00010000 55 56 #endif /* __ASM_SH_RENESAS_SH7785LCR_H */ 57 58