1 /*
2 * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
3 *
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License version 2 as
6 * published by the Free Software Foundation.
7 *
8 * vineetg: Jan 1011
9 * -sched_clock( ) no longer jiffies based. Uses the same clocksource
10 * as gtod
11 *
12 * Rajeshwarr/Vineetg: Mar 2008
13 * -Implemented CONFIG_GENERIC_TIME (rather deleted arch specific code)
14 * for arch independent gettimeofday()
15 * -Implemented CONFIG_GENERIC_CLOCKEVENTS as base for hrtimers
16 *
17 * Vineetg: Mar 2008: Forked off from time.c which now is time-jiff.c
18 */
19
20 /* ARC700 has two 32bit independent prog Timers: TIMER0 and TIMER1
21 * Each can programmed to go from @count to @limit and optionally
22 * interrupt when that happens.
23 * A write to Control Register clears the Interrupt
24 *
25 * We've designated TIMER0 for events (clockevents)
26 * while TIMER1 for free running (clocksource)
27 *
28 * Newer ARC700 cores have 64bit clk fetching RTSC insn, preferred over TIMER1
29 * which however is currently broken
30 */
31
32 #include <linux/spinlock.h>
33 #include <linux/interrupt.h>
34 #include <linux/module.h>
35 #include <linux/sched.h>
36 #include <linux/kernel.h>
37 #include <linux/time.h>
38 #include <linux/init.h>
39 #include <linux/timex.h>
40 #include <linux/profile.h>
41 #include <linux/clocksource.h>
42 #include <linux/clockchips.h>
43 #include <asm/irq.h>
44 #include <asm/arcregs.h>
45 #include <asm/clk.h>
46 #include <asm/mach_desc.h>
47
48 #include <asm/mcip.h>
49
50 /* Timer related Aux registers */
51 #define ARC_REG_TIMER0_LIMIT 0x23 /* timer 0 limit */
52 #define ARC_REG_TIMER0_CTRL 0x22 /* timer 0 control */
53 #define ARC_REG_TIMER0_CNT 0x21 /* timer 0 count */
54 #define ARC_REG_TIMER1_LIMIT 0x102 /* timer 1 limit */
55 #define ARC_REG_TIMER1_CTRL 0x101 /* timer 1 control */
56 #define ARC_REG_TIMER1_CNT 0x100 /* timer 1 count */
57
58 #define TIMER_CTRL_IE (1 << 0) /* Interupt when Count reachs limit */
59 #define TIMER_CTRL_NH (1 << 1) /* Count only when CPU NOT halted */
60
61 #define ARC_TIMER_MAX 0xFFFFFFFF
62
63 /********** Clock Source Device *********/
64
65 #ifdef CONFIG_ARC_HAS_GRTC
66
arc_counter_setup(void)67 static int arc_counter_setup(void)
68 {
69 return 1;
70 }
71
arc_counter_read(struct clocksource * cs)72 static cycle_t arc_counter_read(struct clocksource *cs)
73 {
74 unsigned long flags;
75 union {
76 #ifdef CONFIG_CPU_BIG_ENDIAN
77 struct { u32 h, l; };
78 #else
79 struct { u32 l, h; };
80 #endif
81 cycle_t full;
82 } stamp;
83
84 local_irq_save(flags);
85
86 __mcip_cmd(CMD_GRTC_READ_LO, 0);
87 stamp.l = read_aux_reg(ARC_REG_MCIP_READBACK);
88
89 __mcip_cmd(CMD_GRTC_READ_HI, 0);
90 stamp.h = read_aux_reg(ARC_REG_MCIP_READBACK);
91
92 local_irq_restore(flags);
93
94 return stamp.full;
95 }
96
97 static struct clocksource arc_counter = {
98 .name = "ARConnect GRTC",
99 .rating = 400,
100 .read = arc_counter_read,
101 .mask = CLOCKSOURCE_MASK(64),
102 .flags = CLOCK_SOURCE_IS_CONTINUOUS,
103 };
104
105 #else
106
107 #ifdef CONFIG_ARC_HAS_RTC
108
109 #define AUX_RTC_CTRL 0x103
110 #define AUX_RTC_LOW 0x104
111 #define AUX_RTC_HIGH 0x105
112
arc_counter_setup(void)113 int arc_counter_setup(void)
114 {
115 write_aux_reg(AUX_RTC_CTRL, 1);
116
117 /* Not usable in SMP */
118 return !IS_ENABLED(CONFIG_SMP);
119 }
120
arc_counter_read(struct clocksource * cs)121 static cycle_t arc_counter_read(struct clocksource *cs)
122 {
123 unsigned long status;
124 union {
125 #ifdef CONFIG_CPU_BIG_ENDIAN
126 struct { u32 high, low; };
127 #else
128 struct { u32 low, high; };
129 #endif
130 cycle_t full;
131 } stamp;
132
133 /*
134 * hardware has an internal state machine which tracks readout of
135 * low/high and updates the CTRL.status if
136 * - interrupt/exception taken between the two reads
137 * - high increments after low has been read
138 */
139 do {
140 stamp.low = read_aux_reg(AUX_RTC_LOW);
141 stamp.high = read_aux_reg(AUX_RTC_HIGH);
142 status = read_aux_reg(AUX_RTC_CTRL);
143 } while (!(status & _BITUL(31)));
144
145 return stamp.full;
146 }
147
148 static struct clocksource arc_counter = {
149 .name = "ARCv2 RTC",
150 .rating = 350,
151 .read = arc_counter_read,
152 .mask = CLOCKSOURCE_MASK(64),
153 .flags = CLOCK_SOURCE_IS_CONTINUOUS,
154 };
155
156 #else /* !CONFIG_ARC_HAS_RTC */
157
158 /*
159 * set 32bit TIMER1 to keep counting monotonically and wraparound
160 */
arc_counter_setup(void)161 int arc_counter_setup(void)
162 {
163 write_aux_reg(ARC_REG_TIMER1_LIMIT, ARC_TIMER_MAX);
164 write_aux_reg(ARC_REG_TIMER1_CNT, 0);
165 write_aux_reg(ARC_REG_TIMER1_CTRL, TIMER_CTRL_NH);
166
167 /* Not usable in SMP */
168 return !IS_ENABLED(CONFIG_SMP);
169 }
170
arc_counter_read(struct clocksource * cs)171 static cycle_t arc_counter_read(struct clocksource *cs)
172 {
173 return (cycle_t) read_aux_reg(ARC_REG_TIMER1_CNT);
174 }
175
176 static struct clocksource arc_counter = {
177 .name = "ARC Timer1",
178 .rating = 300,
179 .read = arc_counter_read,
180 .mask = CLOCKSOURCE_MASK(32),
181 .flags = CLOCK_SOURCE_IS_CONTINUOUS,
182 };
183
184 #endif
185 #endif
186
187 /********** Clock Event Device *********/
188
189 /*
190 * Arm the timer to interrupt after @cycles
191 * The distinction for oneshot/periodic is done in arc_event_timer_ack() below
192 */
arc_timer_event_setup(unsigned int cycles)193 static void arc_timer_event_setup(unsigned int cycles)
194 {
195 write_aux_reg(ARC_REG_TIMER0_LIMIT, cycles);
196 write_aux_reg(ARC_REG_TIMER0_CNT, 0); /* start from 0 */
197
198 write_aux_reg(ARC_REG_TIMER0_CTRL, TIMER_CTRL_IE | TIMER_CTRL_NH);
199 }
200
201
arc_clkevent_set_next_event(unsigned long delta,struct clock_event_device * dev)202 static int arc_clkevent_set_next_event(unsigned long delta,
203 struct clock_event_device *dev)
204 {
205 arc_timer_event_setup(delta);
206 return 0;
207 }
208
arc_clkevent_set_periodic(struct clock_event_device * dev)209 static int arc_clkevent_set_periodic(struct clock_event_device *dev)
210 {
211 /*
212 * At X Hz, 1 sec = 1000ms -> X cycles;
213 * 10ms -> X / 100 cycles
214 */
215 arc_timer_event_setup(arc_get_core_freq() / HZ);
216 return 0;
217 }
218
219 static DEFINE_PER_CPU(struct clock_event_device, arc_clockevent_device) = {
220 .name = "ARC Timer0",
221 .features = CLOCK_EVT_FEAT_ONESHOT |
222 CLOCK_EVT_FEAT_PERIODIC,
223 .rating = 300,
224 .irq = TIMER0_IRQ, /* hardwired, no need for resources */
225 .set_next_event = arc_clkevent_set_next_event,
226 .set_state_periodic = arc_clkevent_set_periodic,
227 };
228
timer_irq_handler(int irq,void * dev_id)229 static irqreturn_t timer_irq_handler(int irq, void *dev_id)
230 {
231 /*
232 * Note that generic IRQ core could have passed @evt for @dev_id if
233 * irq_set_chip_and_handler() asked for handle_percpu_devid_irq()
234 */
235 struct clock_event_device *evt = this_cpu_ptr(&arc_clockevent_device);
236 int irq_reenable = clockevent_state_periodic(evt);
237
238 /*
239 * Any write to CTRL reg ACks the interrupt, we rewrite the
240 * Count when [N]ot [H]alted bit.
241 * And re-arm it if perioid by [I]nterrupt [E]nable bit
242 */
243 write_aux_reg(ARC_REG_TIMER0_CTRL, irq_reenable | TIMER_CTRL_NH);
244
245 evt->event_handler(evt);
246
247 return IRQ_HANDLED;
248 }
249
250 /*
251 * Setup the local event timer for @cpu
252 */
arc_local_timer_setup()253 void arc_local_timer_setup()
254 {
255 struct clock_event_device *evt = this_cpu_ptr(&arc_clockevent_device);
256 int cpu = smp_processor_id();
257
258 evt->cpumask = cpumask_of(cpu);
259 clockevents_config_and_register(evt, arc_get_core_freq(),
260 0, ARC_TIMER_MAX);
261
262 /* setup the per-cpu timer IRQ handler - for all cpus */
263 arc_request_percpu_irq(TIMER0_IRQ, cpu, timer_irq_handler,
264 "Timer0 (per-cpu-tick)", evt);
265 }
266
267 /*
268 * Called from start_kernel() - boot CPU only
269 *
270 * -Sets up h/w timers as applicable on boot cpu
271 * -Also sets up any global state needed for timer subsystem:
272 * - for "counting" timer, registers a clocksource, usable across CPUs
273 * (provided that underlying counter h/w is synchronized across cores)
274 * - for "event" timer, sets up TIMER0 IRQ (as that is platform agnostic)
275 */
time_init(void)276 void __init time_init(void)
277 {
278 /*
279 * sets up the timekeeping free-flowing counter which also returns
280 * whether the counter is usable as clocksource
281 */
282 if (arc_counter_setup())
283 /*
284 * CLK upto 4.29 GHz can be safely represented in 32 bits
285 * because Max 32 bit number is 4,294,967,295
286 */
287 clocksource_register_hz(&arc_counter, arc_get_core_freq());
288
289 /* sets up the periodic event timer */
290 arc_local_timer_setup();
291 }
292