1 /*
2 * Copyright 2007 David Gibson, IBM Corporation.
3 *
4 * Based on earlier code:
5 * Matt Porter <mporter@kernel.crashing.org>
6 * Copyright 2002-2005 MontaVista Software Inc.
7 *
8 * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
9 * Copyright (c) 2003, 2004 Zultys Technologies
10 *
11 * Copyright (C) 2009 Wind River Systems, Inc.
12 * Updated for supporting PPC405EX on Kilauea.
13 * Tiejun Chen <tiejun.chen@windriver.com>
14 *
15 * This program is free software; you can redistribute it and/or
16 * modify it under the terms of the GNU General Public License
17 * as published by the Free Software Foundation; either version
18 * 2 of the License, or (at your option) any later version.
19 */
20 #include <stddef.h>
21 #include "types.h"
22 #include "string.h"
23 #include "stdio.h"
24 #include "ops.h"
25 #include "reg.h"
26 #include "dcr.h"
27
chip_11_errata(unsigned long memsize)28 static unsigned long chip_11_errata(unsigned long memsize)
29 {
30 unsigned long pvr;
31
32 pvr = mfpvr();
33
34 switch (pvr & 0xf0000ff0) {
35 case 0x40000850:
36 case 0x400008d0:
37 case 0x200008d0:
38 memsize -= 4096;
39 break;
40 default:
41 break;
42 }
43
44 return memsize;
45 }
46
47 /* Read the 4xx SDRAM controller to get size of system memory. */
ibm4xx_sdram_fixup_memsize(void)48 void ibm4xx_sdram_fixup_memsize(void)
49 {
50 int i;
51 unsigned long memsize, bank_config;
52
53 memsize = 0;
54 for (i = 0; i < ARRAY_SIZE(sdram_bxcr); i++) {
55 bank_config = SDRAM0_READ(sdram_bxcr[i]);
56 if (bank_config & SDRAM_CONFIG_BANK_ENABLE)
57 memsize += SDRAM_CONFIG_BANK_SIZE(bank_config);
58 }
59
60 memsize = chip_11_errata(memsize);
61 dt_fixup_memory(0, memsize);
62 }
63
64 /* Read the 440SPe MQ controller to get size of system memory. */
65 #define DCRN_MQ0_B0BAS 0x40
66 #define DCRN_MQ0_B1BAS 0x41
67 #define DCRN_MQ0_B2BAS 0x42
68 #define DCRN_MQ0_B3BAS 0x43
69
ibm440spe_decode_bas(u32 bas)70 static u64 ibm440spe_decode_bas(u32 bas)
71 {
72 u64 base = ((u64)(bas & 0xFFE00000u)) << 2;
73
74 /* open coded because I'm paranoid about invalid values */
75 switch ((bas >> 4) & 0xFFF) {
76 case 0:
77 return 0;
78 case 0xffc:
79 return base + 0x000800000ull;
80 case 0xff8:
81 return base + 0x001000000ull;
82 case 0xff0:
83 return base + 0x002000000ull;
84 case 0xfe0:
85 return base + 0x004000000ull;
86 case 0xfc0:
87 return base + 0x008000000ull;
88 case 0xf80:
89 return base + 0x010000000ull;
90 case 0xf00:
91 return base + 0x020000000ull;
92 case 0xe00:
93 return base + 0x040000000ull;
94 case 0xc00:
95 return base + 0x080000000ull;
96 case 0x800:
97 return base + 0x100000000ull;
98 }
99 printf("Memory BAS value 0x%08x unsupported !\n", bas);
100 return 0;
101 }
102
ibm440spe_fixup_memsize(void)103 void ibm440spe_fixup_memsize(void)
104 {
105 u64 banktop, memsize = 0;
106
107 /* Ultimately, we should directly construct the memory node
108 * so we are able to handle holes in the memory address space
109 */
110 banktop = ibm440spe_decode_bas(mfdcr(DCRN_MQ0_B0BAS));
111 if (banktop > memsize)
112 memsize = banktop;
113 banktop = ibm440spe_decode_bas(mfdcr(DCRN_MQ0_B1BAS));
114 if (banktop > memsize)
115 memsize = banktop;
116 banktop = ibm440spe_decode_bas(mfdcr(DCRN_MQ0_B2BAS));
117 if (banktop > memsize)
118 memsize = banktop;
119 banktop = ibm440spe_decode_bas(mfdcr(DCRN_MQ0_B3BAS));
120 if (banktop > memsize)
121 memsize = banktop;
122
123 dt_fixup_memory(0, memsize);
124 }
125
126
127 /* 4xx DDR1/2 Denali memory controller support */
128 /* DDR0 registers */
129 #define DDR0_02 2
130 #define DDR0_08 8
131 #define DDR0_10 10
132 #define DDR0_14 14
133 #define DDR0_42 42
134 #define DDR0_43 43
135
136 /* DDR0_02 */
137 #define DDR_START 0x1
138 #define DDR_START_SHIFT 0
139 #define DDR_MAX_CS_REG 0x3
140 #define DDR_MAX_CS_REG_SHIFT 24
141 #define DDR_MAX_COL_REG 0xf
142 #define DDR_MAX_COL_REG_SHIFT 16
143 #define DDR_MAX_ROW_REG 0xf
144 #define DDR_MAX_ROW_REG_SHIFT 8
145 /* DDR0_08 */
146 #define DDR_DDR2_MODE 0x1
147 #define DDR_DDR2_MODE_SHIFT 0
148 /* DDR0_10 */
149 #define DDR_CS_MAP 0x3
150 #define DDR_CS_MAP_SHIFT 8
151 /* DDR0_14 */
152 #define DDR_REDUC 0x1
153 #define DDR_REDUC_SHIFT 16
154 /* DDR0_42 */
155 #define DDR_APIN 0x7
156 #define DDR_APIN_SHIFT 24
157 /* DDR0_43 */
158 #define DDR_COL_SZ 0x7
159 #define DDR_COL_SZ_SHIFT 8
160 #define DDR_BANK8 0x1
161 #define DDR_BANK8_SHIFT 0
162
163 #define DDR_GET_VAL(val, mask, shift) (((val) >> (shift)) & (mask))
164
165 /*
166 * Some U-Boot versions set the number of chipselects to two
167 * for Sequoia/Rainier boards while they only have one chipselect
168 * hardwired. Hardcode the number of chipselects to one
169 * for sequioa/rainer board models or read the actual value
170 * from the memory controller register DDR0_10 otherwise.
171 */
ibm4xx_denali_get_cs(void)172 static inline u32 ibm4xx_denali_get_cs(void)
173 {
174 void *devp;
175 char model[64];
176 u32 val, cs;
177
178 devp = finddevice("/");
179 if (!devp)
180 goto read_cs;
181
182 if (getprop(devp, "model", model, sizeof(model)) <= 0)
183 goto read_cs;
184
185 model[sizeof(model)-1] = 0;
186
187 if (!strcmp(model, "amcc,sequoia") ||
188 !strcmp(model, "amcc,rainier"))
189 return 1;
190
191 read_cs:
192 /* get CS value */
193 val = SDRAM0_READ(DDR0_10);
194
195 val = DDR_GET_VAL(val, DDR_CS_MAP, DDR_CS_MAP_SHIFT);
196 cs = 0;
197 while (val) {
198 if (val & 0x1)
199 cs++;
200 val = val >> 1;
201 }
202 return cs;
203 }
204
ibm4xx_denali_fixup_memsize(void)205 void ibm4xx_denali_fixup_memsize(void)
206 {
207 u32 val, max_cs, max_col, max_row;
208 u32 cs, col, row, bank, dpath;
209 unsigned long memsize;
210
211 val = SDRAM0_READ(DDR0_02);
212 if (!DDR_GET_VAL(val, DDR_START, DDR_START_SHIFT))
213 fatal("DDR controller is not initialized\n");
214
215 /* get maximum cs col and row values */
216 max_cs = DDR_GET_VAL(val, DDR_MAX_CS_REG, DDR_MAX_CS_REG_SHIFT);
217 max_col = DDR_GET_VAL(val, DDR_MAX_COL_REG, DDR_MAX_COL_REG_SHIFT);
218 max_row = DDR_GET_VAL(val, DDR_MAX_ROW_REG, DDR_MAX_ROW_REG_SHIFT);
219
220 cs = ibm4xx_denali_get_cs();
221 if (!cs)
222 fatal("No memory installed\n");
223 if (cs > max_cs)
224 fatal("DDR wrong CS configuration\n");
225
226 /* get data path bytes */
227 val = SDRAM0_READ(DDR0_14);
228
229 if (DDR_GET_VAL(val, DDR_REDUC, DDR_REDUC_SHIFT))
230 dpath = 4; /* 32 bits */
231 else
232 dpath = 8; /* 64 bits */
233
234 /* get address pins (rows) */
235 val = SDRAM0_READ(DDR0_42);
236
237 row = DDR_GET_VAL(val, DDR_APIN, DDR_APIN_SHIFT);
238 if (row > max_row)
239 fatal("DDR wrong APIN configuration\n");
240 row = max_row - row;
241
242 /* get collomn size and banks */
243 val = SDRAM0_READ(DDR0_43);
244
245 col = DDR_GET_VAL(val, DDR_COL_SZ, DDR_COL_SZ_SHIFT);
246 if (col > max_col)
247 fatal("DDR wrong COL configuration\n");
248 col = max_col - col;
249
250 if (DDR_GET_VAL(val, DDR_BANK8, DDR_BANK8_SHIFT))
251 bank = 8; /* 8 banks */
252 else
253 bank = 4; /* 4 banks */
254
255 memsize = cs * (1 << (col+row)) * bank * dpath;
256 memsize = chip_11_errata(memsize);
257 dt_fixup_memory(0, memsize);
258 }
259
260 #define SPRN_DBCR0_40X 0x3F2
261 #define SPRN_DBCR0_44X 0x134
262 #define DBCR0_RST_SYSTEM 0x30000000
263
ibm44x_dbcr_reset(void)264 void ibm44x_dbcr_reset(void)
265 {
266 unsigned long tmp;
267
268 asm volatile (
269 "mfspr %0,%1\n"
270 "oris %0,%0,%2@h\n"
271 "mtspr %1,%0"
272 : "=&r"(tmp) : "i"(SPRN_DBCR0_44X), "i"(DBCR0_RST_SYSTEM)
273 );
274
275 }
276
ibm40x_dbcr_reset(void)277 void ibm40x_dbcr_reset(void)
278 {
279 unsigned long tmp;
280
281 asm volatile (
282 "mfspr %0,%1\n"
283 "oris %0,%0,%2@h\n"
284 "mtspr %1,%0"
285 : "=&r"(tmp) : "i"(SPRN_DBCR0_40X), "i"(DBCR0_RST_SYSTEM)
286 );
287 }
288
289 #define EMAC_RESET 0x20000000
ibm4xx_quiesce_eth(u32 * emac0,u32 * emac1)290 void ibm4xx_quiesce_eth(u32 *emac0, u32 *emac1)
291 {
292 /* Quiesce the MAL and EMAC(s) since PIBS/OpenBIOS don't
293 * do this for us
294 */
295 if (emac0)
296 *emac0 = EMAC_RESET;
297 if (emac1)
298 *emac1 = EMAC_RESET;
299
300 mtdcr(DCRN_MAL0_CFG, MAL_RESET);
301 while (mfdcr(DCRN_MAL0_CFG) & MAL_RESET)
302 ; /* loop until reset takes effect */
303 }
304
305 /* Read 4xx EBC bus bridge registers to get mappings of the peripheral
306 * banks into the OPB address space */
ibm4xx_fixup_ebc_ranges(const char * ebc)307 void ibm4xx_fixup_ebc_ranges(const char *ebc)
308 {
309 void *devp;
310 u32 bxcr;
311 u32 ranges[EBC_NUM_BANKS*4];
312 u32 *p = ranges;
313 int i;
314
315 for (i = 0; i < EBC_NUM_BANKS; i++) {
316 mtdcr(DCRN_EBC0_CFGADDR, EBC_BXCR(i));
317 bxcr = mfdcr(DCRN_EBC0_CFGDATA);
318
319 if ((bxcr & EBC_BXCR_BU) != EBC_BXCR_BU_OFF) {
320 *p++ = i;
321 *p++ = 0;
322 *p++ = bxcr & EBC_BXCR_BAS;
323 *p++ = EBC_BXCR_BANK_SIZE(bxcr);
324 }
325 }
326
327 devp = finddevice(ebc);
328 if (! devp)
329 fatal("Couldn't locate EBC node %s\n\r", ebc);
330
331 setprop(devp, "ranges", ranges, (p - ranges) * sizeof(u32));
332 }
333
334 /* Calculate 440GP clocks */
ibm440gp_fixup_clocks(unsigned int sys_clk,unsigned int ser_clk)335 void ibm440gp_fixup_clocks(unsigned int sys_clk, unsigned int ser_clk)
336 {
337 u32 sys0 = mfdcr(DCRN_CPC0_SYS0);
338 u32 cr0 = mfdcr(DCRN_CPC0_CR0);
339 u32 cpu, plb, opb, ebc, tb, uart0, uart1, m;
340 u32 opdv = CPC0_SYS0_OPDV(sys0);
341 u32 epdv = CPC0_SYS0_EPDV(sys0);
342
343 if (sys0 & CPC0_SYS0_BYPASS) {
344 /* Bypass system PLL */
345 cpu = plb = sys_clk;
346 } else {
347 if (sys0 & CPC0_SYS0_EXTSL)
348 /* PerClk */
349 m = CPC0_SYS0_FWDVB(sys0) * opdv * epdv;
350 else
351 /* CPU clock */
352 m = CPC0_SYS0_FBDV(sys0) * CPC0_SYS0_FWDVA(sys0);
353 cpu = sys_clk * m / CPC0_SYS0_FWDVA(sys0);
354 plb = sys_clk * m / CPC0_SYS0_FWDVB(sys0);
355 }
356
357 opb = plb / opdv;
358 ebc = opb / epdv;
359
360 /* FIXME: Check if this is for all 440GP, or just Ebony */
361 if ((mfpvr() & 0xf0000fff) == 0x40000440)
362 /* Rev. B 440GP, use external system clock */
363 tb = sys_clk;
364 else
365 /* Rev. C 440GP, errata force us to use internal clock */
366 tb = cpu;
367
368 if (cr0 & CPC0_CR0_U0EC)
369 /* External UART clock */
370 uart0 = ser_clk;
371 else
372 /* Internal UART clock */
373 uart0 = plb / CPC0_CR0_UDIV(cr0);
374
375 if (cr0 & CPC0_CR0_U1EC)
376 /* External UART clock */
377 uart1 = ser_clk;
378 else
379 /* Internal UART clock */
380 uart1 = plb / CPC0_CR0_UDIV(cr0);
381
382 printf("PPC440GP: SysClk = %dMHz (%x)\n\r",
383 (sys_clk + 500000) / 1000000, sys_clk);
384
385 dt_fixup_cpu_clocks(cpu, tb, 0);
386
387 dt_fixup_clock("/plb", plb);
388 dt_fixup_clock("/plb/opb", opb);
389 dt_fixup_clock("/plb/opb/ebc", ebc);
390 dt_fixup_clock("/plb/opb/serial@40000200", uart0);
391 dt_fixup_clock("/plb/opb/serial@40000300", uart1);
392 }
393
394 #define SPRN_CCR1 0x378
395
__fix_zero(u32 v,u32 def)396 static inline u32 __fix_zero(u32 v, u32 def)
397 {
398 return v ? v : def;
399 }
400
__ibm440eplike_fixup_clocks(unsigned int sys_clk,unsigned int tmr_clk,int per_clk_from_opb)401 static unsigned int __ibm440eplike_fixup_clocks(unsigned int sys_clk,
402 unsigned int tmr_clk,
403 int per_clk_from_opb)
404 {
405 /* PLL config */
406 u32 pllc = CPR0_READ(DCRN_CPR0_PLLC);
407 u32 plld = CPR0_READ(DCRN_CPR0_PLLD);
408
409 /* Dividers */
410 u32 fbdv = __fix_zero((plld >> 24) & 0x1f, 32);
411 u32 fwdva = __fix_zero((plld >> 16) & 0xf, 16);
412 u32 fwdvb = __fix_zero((plld >> 8) & 7, 8);
413 u32 lfbdv = __fix_zero(plld & 0x3f, 64);
414 u32 pradv0 = __fix_zero((CPR0_READ(DCRN_CPR0_PRIMAD) >> 24) & 7, 8);
415 u32 prbdv0 = __fix_zero((CPR0_READ(DCRN_CPR0_PRIMBD) >> 24) & 7, 8);
416 u32 opbdv0 = __fix_zero((CPR0_READ(DCRN_CPR0_OPBD) >> 24) & 3, 4);
417 u32 perdv0 = __fix_zero((CPR0_READ(DCRN_CPR0_PERD) >> 24) & 3, 4);
418
419 /* Input clocks for primary dividers */
420 u32 clk_a, clk_b;
421
422 /* Resulting clocks */
423 u32 cpu, plb, opb, ebc, vco;
424
425 /* Timebase */
426 u32 ccr1, tb = tmr_clk;
427
428 if (pllc & 0x40000000) {
429 u32 m;
430
431 /* Feedback path */
432 switch ((pllc >> 24) & 7) {
433 case 0:
434 /* PLLOUTx */
435 m = ((pllc & 0x20000000) ? fwdvb : fwdva) * lfbdv;
436 break;
437 case 1:
438 /* CPU */
439 m = fwdva * pradv0;
440 break;
441 case 5:
442 /* PERClk */
443 m = fwdvb * prbdv0 * opbdv0 * perdv0;
444 break;
445 default:
446 printf("WARNING ! Invalid PLL feedback source !\n");
447 goto bypass;
448 }
449 m *= fbdv;
450 vco = sys_clk * m;
451 clk_a = vco / fwdva;
452 clk_b = vco / fwdvb;
453 } else {
454 bypass:
455 /* Bypass system PLL */
456 vco = 0;
457 clk_a = clk_b = sys_clk;
458 }
459
460 cpu = clk_a / pradv0;
461 plb = clk_b / prbdv0;
462 opb = plb / opbdv0;
463 ebc = (per_clk_from_opb ? opb : plb) / perdv0;
464
465 /* Figure out timebase. Either CPU or default TmrClk */
466 ccr1 = mfspr(SPRN_CCR1);
467
468 /* If passed a 0 tmr_clk, force CPU clock */
469 if (tb == 0) {
470 ccr1 &= ~0x80u;
471 mtspr(SPRN_CCR1, ccr1);
472 }
473 if ((ccr1 & 0x0080) == 0)
474 tb = cpu;
475
476 dt_fixup_cpu_clocks(cpu, tb, 0);
477 dt_fixup_clock("/plb", plb);
478 dt_fixup_clock("/plb/opb", opb);
479 dt_fixup_clock("/plb/opb/ebc", ebc);
480
481 return plb;
482 }
483
eplike_fixup_uart_clk(int index,const char * path,unsigned int ser_clk,unsigned int plb_clk)484 static void eplike_fixup_uart_clk(int index, const char *path,
485 unsigned int ser_clk,
486 unsigned int plb_clk)
487 {
488 unsigned int sdr;
489 unsigned int clock;
490
491 switch (index) {
492 case 0:
493 sdr = SDR0_READ(DCRN_SDR0_UART0);
494 break;
495 case 1:
496 sdr = SDR0_READ(DCRN_SDR0_UART1);
497 break;
498 case 2:
499 sdr = SDR0_READ(DCRN_SDR0_UART2);
500 break;
501 case 3:
502 sdr = SDR0_READ(DCRN_SDR0_UART3);
503 break;
504 default:
505 return;
506 }
507
508 if (sdr & 0x00800000u)
509 clock = ser_clk;
510 else
511 clock = plb_clk / __fix_zero(sdr & 0xff, 256);
512
513 dt_fixup_clock(path, clock);
514 }
515
ibm440ep_fixup_clocks(unsigned int sys_clk,unsigned int ser_clk,unsigned int tmr_clk)516 void ibm440ep_fixup_clocks(unsigned int sys_clk,
517 unsigned int ser_clk,
518 unsigned int tmr_clk)
519 {
520 unsigned int plb_clk = __ibm440eplike_fixup_clocks(sys_clk, tmr_clk, 0);
521
522 /* serial clocks need fixup based on int/ext */
523 eplike_fixup_uart_clk(0, "/plb/opb/serial@ef600300", ser_clk, plb_clk);
524 eplike_fixup_uart_clk(1, "/plb/opb/serial@ef600400", ser_clk, plb_clk);
525 eplike_fixup_uart_clk(2, "/plb/opb/serial@ef600500", ser_clk, plb_clk);
526 eplike_fixup_uart_clk(3, "/plb/opb/serial@ef600600", ser_clk, plb_clk);
527 }
528
ibm440gx_fixup_clocks(unsigned int sys_clk,unsigned int ser_clk,unsigned int tmr_clk)529 void ibm440gx_fixup_clocks(unsigned int sys_clk,
530 unsigned int ser_clk,
531 unsigned int tmr_clk)
532 {
533 unsigned int plb_clk = __ibm440eplike_fixup_clocks(sys_clk, tmr_clk, 1);
534
535 /* serial clocks need fixup based on int/ext */
536 eplike_fixup_uart_clk(0, "/plb/opb/serial@40000200", ser_clk, plb_clk);
537 eplike_fixup_uart_clk(1, "/plb/opb/serial@40000300", ser_clk, plb_clk);
538 }
539
ibm440spe_fixup_clocks(unsigned int sys_clk,unsigned int ser_clk,unsigned int tmr_clk)540 void ibm440spe_fixup_clocks(unsigned int sys_clk,
541 unsigned int ser_clk,
542 unsigned int tmr_clk)
543 {
544 unsigned int plb_clk = __ibm440eplike_fixup_clocks(sys_clk, tmr_clk, 1);
545
546 /* serial clocks need fixup based on int/ext */
547 eplike_fixup_uart_clk(0, "/plb/opb/serial@f0000200", ser_clk, plb_clk);
548 eplike_fixup_uart_clk(1, "/plb/opb/serial@f0000300", ser_clk, plb_clk);
549 eplike_fixup_uart_clk(2, "/plb/opb/serial@f0000600", ser_clk, plb_clk);
550 }
551
ibm405gp_fixup_clocks(unsigned int sys_clk,unsigned int ser_clk)552 void ibm405gp_fixup_clocks(unsigned int sys_clk, unsigned int ser_clk)
553 {
554 u32 pllmr = mfdcr(DCRN_CPC0_PLLMR);
555 u32 cpc0_cr0 = mfdcr(DCRN_405_CPC0_CR0);
556 u32 cpc0_cr1 = mfdcr(DCRN_405_CPC0_CR1);
557 u32 psr = mfdcr(DCRN_405_CPC0_PSR);
558 u32 cpu, plb, opb, ebc, tb, uart0, uart1, m;
559 u32 fwdv, fwdvb, fbdv, cbdv, opdv, epdv, ppdv, udiv;
560
561 fwdv = (8 - ((pllmr & 0xe0000000) >> 29));
562 fbdv = (pllmr & 0x1e000000) >> 25;
563 if (fbdv == 0)
564 fbdv = 16;
565 cbdv = ((pllmr & 0x00060000) >> 17) + 1; /* CPU:PLB */
566 opdv = ((pllmr & 0x00018000) >> 15) + 1; /* PLB:OPB */
567 ppdv = ((pllmr & 0x00001800) >> 13) + 1; /* PLB:PCI */
568 epdv = ((pllmr & 0x00001800) >> 11) + 2; /* PLB:EBC */
569 udiv = ((cpc0_cr0 & 0x3e) >> 1) + 1;
570
571 /* check for 405GPr */
572 if ((mfpvr() & 0xfffffff0) == (0x50910951 & 0xfffffff0)) {
573 fwdvb = 8 - (pllmr & 0x00000007);
574 if (!(psr & 0x00001000)) /* PCI async mode enable == 0 */
575 if (psr & 0x00000020) /* New mode enable */
576 m = fwdvb * 2 * ppdv;
577 else
578 m = fwdvb * cbdv * ppdv;
579 else if (psr & 0x00000020) /* New mode enable */
580 if (psr & 0x00000800) /* PerClk synch mode */
581 m = fwdvb * 2 * epdv;
582 else
583 m = fbdv * fwdv;
584 else if (epdv == fbdv)
585 m = fbdv * cbdv * epdv;
586 else
587 m = fbdv * fwdvb * cbdv;
588
589 cpu = sys_clk * m / fwdv;
590 plb = sys_clk * m / (fwdvb * cbdv);
591 } else {
592 m = fwdv * fbdv * cbdv;
593 cpu = sys_clk * m / fwdv;
594 plb = cpu / cbdv;
595 }
596 opb = plb / opdv;
597 ebc = plb / epdv;
598
599 if (cpc0_cr0 & 0x80)
600 /* uart0 uses the external clock */
601 uart0 = ser_clk;
602 else
603 uart0 = cpu / udiv;
604
605 if (cpc0_cr0 & 0x40)
606 /* uart1 uses the external clock */
607 uart1 = ser_clk;
608 else
609 uart1 = cpu / udiv;
610
611 /* setup the timebase clock to tick at the cpu frequency */
612 cpc0_cr1 = cpc0_cr1 & ~0x00800000;
613 mtdcr(DCRN_405_CPC0_CR1, cpc0_cr1);
614 tb = cpu;
615
616 dt_fixup_cpu_clocks(cpu, tb, 0);
617 dt_fixup_clock("/plb", plb);
618 dt_fixup_clock("/plb/opb", opb);
619 dt_fixup_clock("/plb/ebc", ebc);
620 dt_fixup_clock("/plb/opb/serial@ef600300", uart0);
621 dt_fixup_clock("/plb/opb/serial@ef600400", uart1);
622 }
623
624
ibm405ep_fixup_clocks(unsigned int sys_clk)625 void ibm405ep_fixup_clocks(unsigned int sys_clk)
626 {
627 u32 pllmr0 = mfdcr(DCRN_CPC0_PLLMR0);
628 u32 pllmr1 = mfdcr(DCRN_CPC0_PLLMR1);
629 u32 cpc0_ucr = mfdcr(DCRN_CPC0_UCR);
630 u32 cpu, plb, opb, ebc, uart0, uart1;
631 u32 fwdva, fwdvb, fbdv, cbdv, opdv, epdv;
632 u32 pllmr0_ccdv, tb, m;
633
634 fwdva = 8 - ((pllmr1 & 0x00070000) >> 16);
635 fwdvb = 8 - ((pllmr1 & 0x00007000) >> 12);
636 fbdv = (pllmr1 & 0x00f00000) >> 20;
637 if (fbdv == 0)
638 fbdv = 16;
639
640 cbdv = ((pllmr0 & 0x00030000) >> 16) + 1; /* CPU:PLB */
641 epdv = ((pllmr0 & 0x00000300) >> 8) + 2; /* PLB:EBC */
642 opdv = ((pllmr0 & 0x00003000) >> 12) + 1; /* PLB:OPB */
643
644 m = fbdv * fwdvb;
645
646 pllmr0_ccdv = ((pllmr0 & 0x00300000) >> 20) + 1;
647 if (pllmr1 & 0x80000000)
648 cpu = sys_clk * m / (fwdva * pllmr0_ccdv);
649 else
650 cpu = sys_clk / pllmr0_ccdv;
651
652 plb = cpu / cbdv;
653 opb = plb / opdv;
654 ebc = plb / epdv;
655 tb = cpu;
656 uart0 = cpu / (cpc0_ucr & 0x0000007f);
657 uart1 = cpu / ((cpc0_ucr & 0x00007f00) >> 8);
658
659 dt_fixup_cpu_clocks(cpu, tb, 0);
660 dt_fixup_clock("/plb", plb);
661 dt_fixup_clock("/plb/opb", opb);
662 dt_fixup_clock("/plb/ebc", ebc);
663 dt_fixup_clock("/plb/opb/serial@ef600300", uart0);
664 dt_fixup_clock("/plb/opb/serial@ef600400", uart1);
665 }
666
667 static u8 ibm405ex_fwdv_multi_bits[] = {
668 /* values for: 1 - 16 */
669 0x01, 0x02, 0x0e, 0x09, 0x04, 0x0b, 0x10, 0x0d, 0x0c, 0x05,
670 0x06, 0x0f, 0x0a, 0x07, 0x08, 0x03
671 };
672
ibm405ex_get_fwdva(unsigned long cpr_fwdv)673 u32 ibm405ex_get_fwdva(unsigned long cpr_fwdv)
674 {
675 u32 index;
676
677 for (index = 0; index < ARRAY_SIZE(ibm405ex_fwdv_multi_bits); index++)
678 if (cpr_fwdv == (u32)ibm405ex_fwdv_multi_bits[index])
679 return index + 1;
680
681 return 0;
682 }
683
684 static u8 ibm405ex_fbdv_multi_bits[] = {
685 /* values for: 1 - 100 */
686 0x00, 0xff, 0x7e, 0xfd, 0x7a, 0xf5, 0x6a, 0xd5, 0x2a, 0xd4,
687 0x29, 0xd3, 0x26, 0xcc, 0x19, 0xb3, 0x67, 0xce, 0x1d, 0xbb,
688 0x77, 0xee, 0x5d, 0xba, 0x74, 0xe9, 0x52, 0xa5, 0x4b, 0x96,
689 0x2c, 0xd8, 0x31, 0xe3, 0x46, 0x8d, 0x1b, 0xb7, 0x6f, 0xde,
690 0x3d, 0xfb, 0x76, 0xed, 0x5a, 0xb5, 0x6b, 0xd6, 0x2d, 0xdb,
691 0x36, 0xec, 0x59, 0xb2, 0x64, 0xc9, 0x12, 0xa4, 0x48, 0x91,
692 0x23, 0xc7, 0x0e, 0x9c, 0x38, 0xf0, 0x61, 0xc2, 0x05, 0x8b,
693 0x17, 0xaf, 0x5f, 0xbe, 0x7c, 0xf9, 0x72, 0xe5, 0x4a, 0x95,
694 0x2b, 0xd7, 0x2e, 0xdc, 0x39, 0xf3, 0x66, 0xcd, 0x1a, 0xb4,
695 0x68, 0xd1, 0x22, 0xc4, 0x09, 0x93, 0x27, 0xcf, 0x1e, 0xbc,
696 /* values for: 101 - 200 */
697 0x78, 0xf1, 0x62, 0xc5, 0x0a, 0x94, 0x28, 0xd0, 0x21, 0xc3,
698 0x06, 0x8c, 0x18, 0xb0, 0x60, 0xc1, 0x02, 0x84, 0x08, 0x90,
699 0x20, 0xc0, 0x01, 0x83, 0x07, 0x8f, 0x1f, 0xbf, 0x7f, 0xfe,
700 0x7d, 0xfa, 0x75, 0xea, 0x55, 0xaa, 0x54, 0xa9, 0x53, 0xa6,
701 0x4c, 0x99, 0x33, 0xe7, 0x4e, 0x9d, 0x3b, 0xf7, 0x6e, 0xdd,
702 0x3a, 0xf4, 0x69, 0xd2, 0x25, 0xcb, 0x16, 0xac, 0x58, 0xb1,
703 0x63, 0xc6, 0x0d, 0x9b, 0x37, 0xef, 0x5e, 0xbd, 0x7b, 0xf6,
704 0x6d, 0xda, 0x35, 0xeb, 0x56, 0xad, 0x5b, 0xb6, 0x6c, 0xd9,
705 0x32, 0xe4, 0x49, 0x92, 0x24, 0xc8, 0x11, 0xa3, 0x47, 0x8e,
706 0x1c, 0xb8, 0x70, 0xe1, 0x42, 0x85, 0x0b, 0x97, 0x2f, 0xdf,
707 /* values for: 201 - 255 */
708 0x3e, 0xfc, 0x79, 0xf2, 0x65, 0xca, 0x15, 0xab, 0x57, 0xae,
709 0x5c, 0xb9, 0x73, 0xe6, 0x4d, 0x9a, 0x34, 0xe8, 0x51, 0xa2,
710 0x44, 0x89, 0x13, 0xa7, 0x4f, 0x9e, 0x3c, 0xf8, 0x71, 0xe2,
711 0x45, 0x8a, 0x14, 0xa8, 0x50, 0xa1, 0x43, 0x86, 0x0c, 0x98,
712 0x30, 0xe0, 0x41, 0x82, 0x04, 0x88, 0x10, 0xa0, 0x40, 0x81,
713 0x03, 0x87, 0x0f, 0x9f, 0x3f /* END */
714 };
715
ibm405ex_get_fbdv(unsigned long cpr_fbdv)716 u32 ibm405ex_get_fbdv(unsigned long cpr_fbdv)
717 {
718 u32 index;
719
720 for (index = 0; index < ARRAY_SIZE(ibm405ex_fbdv_multi_bits); index++)
721 if (cpr_fbdv == (u32)ibm405ex_fbdv_multi_bits[index])
722 return index + 1;
723
724 return 0;
725 }
726
ibm405ex_fixup_clocks(unsigned int sys_clk,unsigned int uart_clk)727 void ibm405ex_fixup_clocks(unsigned int sys_clk, unsigned int uart_clk)
728 {
729 /* PLL config */
730 u32 pllc = CPR0_READ(DCRN_CPR0_PLLC);
731 u32 plld = CPR0_READ(DCRN_CPR0_PLLD);
732 u32 cpud = CPR0_READ(DCRN_CPR0_PRIMAD);
733 u32 plbd = CPR0_READ(DCRN_CPR0_PRIMBD);
734 u32 opbd = CPR0_READ(DCRN_CPR0_OPBD);
735 u32 perd = CPR0_READ(DCRN_CPR0_PERD);
736
737 /* Dividers */
738 u32 fbdv = ibm405ex_get_fbdv(__fix_zero((plld >> 24) & 0xff, 1));
739
740 u32 fwdva = ibm405ex_get_fwdva(__fix_zero((plld >> 16) & 0x0f, 1));
741
742 u32 cpudv0 = __fix_zero((cpud >> 24) & 7, 8);
743
744 /* PLBDV0 is hardwared to 010. */
745 u32 plbdv0 = 2;
746 u32 plb2xdv0 = __fix_zero((plbd >> 16) & 7, 8);
747
748 u32 opbdv0 = __fix_zero((opbd >> 24) & 3, 4);
749
750 u32 perdv0 = __fix_zero((perd >> 24) & 3, 4);
751
752 /* Resulting clocks */
753 u32 cpu, plb, opb, ebc, vco, tb, uart0, uart1;
754
755 /* PLL's VCO is the source for primary forward ? */
756 if (pllc & 0x40000000) {
757 u32 m;
758
759 /* Feedback path */
760 switch ((pllc >> 24) & 7) {
761 case 0:
762 /* PLLOUTx */
763 m = fbdv;
764 break;
765 case 1:
766 /* CPU */
767 m = fbdv * fwdva * cpudv0;
768 break;
769 case 5:
770 /* PERClk */
771 m = fbdv * fwdva * plb2xdv0 * plbdv0 * opbdv0 * perdv0;
772 break;
773 default:
774 printf("WARNING ! Invalid PLL feedback source !\n");
775 goto bypass;
776 }
777
778 vco = (unsigned int)(sys_clk * m);
779 } else {
780 bypass:
781 /* Bypass system PLL */
782 vco = 0;
783 }
784
785 /* CPU = VCO / ( FWDVA x CPUDV0) */
786 cpu = vco / (fwdva * cpudv0);
787 /* PLB = VCO / ( FWDVA x PLB2XDV0 x PLBDV0) */
788 plb = vco / (fwdva * plb2xdv0 * plbdv0);
789 /* OPB = PLB / OPBDV0 */
790 opb = plb / opbdv0;
791 /* EBC = OPB / PERDV0 */
792 ebc = opb / perdv0;
793
794 tb = cpu;
795 uart0 = uart1 = uart_clk;
796
797 dt_fixup_cpu_clocks(cpu, tb, 0);
798 dt_fixup_clock("/plb", plb);
799 dt_fixup_clock("/plb/opb", opb);
800 dt_fixup_clock("/plb/opb/ebc", ebc);
801 dt_fixup_clock("/plb/opb/serial@ef600200", uart0);
802 dt_fixup_clock("/plb/opb/serial@ef600300", uart1);
803 }
804