1 /*
2 * ip27-irq.c: Highlevel interrupt handling for IP27 architecture.
3 *
4 * Copyright (C) 1999, 2000 Ralf Baechle (ralf@gnu.org)
5 * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
6 * Copyright (C) 1999 - 2001 Kanoj Sarcar
7 */
8
9 #undef DEBUG
10
11 #include <linux/irq.h>
12 #include <linux/errno.h>
13 #include <linux/signal.h>
14 #include <linux/sched.h>
15 #include <linux/types.h>
16 #include <linux/interrupt.h>
17 #include <linux/ioport.h>
18 #include <linux/timex.h>
19 #include <linux/smp.h>
20 #include <linux/random.h>
21 #include <linux/kernel.h>
22 #include <linux/kernel_stat.h>
23 #include <linux/delay.h>
24 #include <linux/bitops.h>
25
26 #include <asm/bootinfo.h>
27 #include <asm/io.h>
28 #include <asm/mipsregs.h>
29
30 #include <asm/processor.h>
31 #include <asm/pci/bridge.h>
32 #include <asm/sn/addrs.h>
33 #include <asm/sn/agent.h>
34 #include <asm/sn/arch.h>
35 #include <asm/sn/hub.h>
36 #include <asm/sn/intr.h>
37
38 /*
39 * Linux has a controller-independent x86 interrupt architecture.
40 * every controller has a 'controller-template', that is used
41 * by the main code to do the right thing. Each driver-visible
42 * interrupt source is transparently wired to the appropriate
43 * controller. Thus drivers need not be aware of the
44 * interrupt-controller.
45 *
46 * Various interrupt controllers we handle: 8259 PIC, SMP IO-APIC,
47 * PIIX4's internal 8259 PIC and SGI's Visual Workstation Cobalt (IO-)APIC.
48 * (IO-APICs assumed to be messaging to Pentium local-APICs)
49 *
50 * the code is designed to be easily extended with new/different
51 * interrupt controllers, without having to do assembly magic.
52 */
53
54 extern struct bridge_controller *irq_to_bridge[];
55 extern int irq_to_slot[];
56
57 /*
58 * use these macros to get the encoded nasid and widget id
59 * from the irq value
60 */
61 #define IRQ_TO_BRIDGE(i) irq_to_bridge[(i)]
62 #define SLOT_FROM_PCI_IRQ(i) irq_to_slot[i]
63
alloc_level(int cpu,int irq)64 static inline int alloc_level(int cpu, int irq)
65 {
66 struct hub_data *hub = hub_data(cpu_to_node(cpu));
67 struct slice_data *si = cpu_data[cpu].data;
68 int level;
69
70 level = find_first_zero_bit(hub->irq_alloc_mask, LEVELS_PER_SLICE);
71 if (level >= LEVELS_PER_SLICE)
72 panic("Cpu %d flooded with devices", cpu);
73
74 __set_bit(level, hub->irq_alloc_mask);
75 si->level_to_irq[level] = irq;
76
77 return level;
78 }
79
find_level(cpuid_t * cpunum,int irq)80 static inline int find_level(cpuid_t *cpunum, int irq)
81 {
82 int cpu, i;
83
84 for_each_online_cpu(cpu) {
85 struct slice_data *si = cpu_data[cpu].data;
86
87 for (i = BASE_PCI_IRQ; i < LEVELS_PER_SLICE; i++)
88 if (si->level_to_irq[i] == irq) {
89 *cpunum = cpu;
90
91 return i;
92 }
93 }
94
95 panic("Could not identify cpu/level for irq %d", irq);
96 }
97
intr_connect_level(int cpu,int bit)98 static int intr_connect_level(int cpu, int bit)
99 {
100 nasid_t nasid = COMPACT_TO_NASID_NODEID(cpu_to_node(cpu));
101 struct slice_data *si = cpu_data[cpu].data;
102
103 set_bit(bit, si->irq_enable_mask);
104
105 if (!cputoslice(cpu)) {
106 REMOTE_HUB_S(nasid, PI_INT_MASK0_A, si->irq_enable_mask[0]);
107 REMOTE_HUB_S(nasid, PI_INT_MASK1_A, si->irq_enable_mask[1]);
108 } else {
109 REMOTE_HUB_S(nasid, PI_INT_MASK0_B, si->irq_enable_mask[0]);
110 REMOTE_HUB_S(nasid, PI_INT_MASK1_B, si->irq_enable_mask[1]);
111 }
112
113 return 0;
114 }
115
intr_disconnect_level(int cpu,int bit)116 static int intr_disconnect_level(int cpu, int bit)
117 {
118 nasid_t nasid = COMPACT_TO_NASID_NODEID(cpu_to_node(cpu));
119 struct slice_data *si = cpu_data[cpu].data;
120
121 clear_bit(bit, si->irq_enable_mask);
122
123 if (!cputoslice(cpu)) {
124 REMOTE_HUB_S(nasid, PI_INT_MASK0_A, si->irq_enable_mask[0]);
125 REMOTE_HUB_S(nasid, PI_INT_MASK1_A, si->irq_enable_mask[1]);
126 } else {
127 REMOTE_HUB_S(nasid, PI_INT_MASK0_B, si->irq_enable_mask[0]);
128 REMOTE_HUB_S(nasid, PI_INT_MASK1_B, si->irq_enable_mask[1]);
129 }
130
131 return 0;
132 }
133
134 /* Startup one of the (PCI ...) IRQs routes over a bridge. */
startup_bridge_irq(struct irq_data * d)135 static unsigned int startup_bridge_irq(struct irq_data *d)
136 {
137 struct bridge_controller *bc;
138 bridgereg_t device;
139 bridge_t *bridge;
140 int pin, swlevel;
141 cpuid_t cpu;
142
143 pin = SLOT_FROM_PCI_IRQ(d->irq);
144 bc = IRQ_TO_BRIDGE(d->irq);
145 bridge = bc->base;
146
147 pr_debug("bridge_startup(): irq= 0x%x pin=%d\n", d->irq, pin);
148 /*
149 * "map" irq to a swlevel greater than 6 since the first 6 bits
150 * of INT_PEND0 are taken
151 */
152 swlevel = find_level(&cpu, d->irq);
153 bridge->b_int_addr[pin].addr = (0x20000 | swlevel | (bc->nasid << 8));
154 bridge->b_int_enable |= (1 << pin);
155 bridge->b_int_enable |= 0x7ffffe00; /* more stuff in int_enable */
156
157 /*
158 * Enable sending of an interrupt clear packt to the hub on a high to
159 * low transition of the interrupt pin.
160 *
161 * IRIX sets additional bits in the address which are documented as
162 * reserved in the bridge docs.
163 */
164 bridge->b_int_mode |= (1UL << pin);
165
166 /*
167 * We assume the bridge to have a 1:1 mapping between devices
168 * (slots) and intr pins.
169 */
170 device = bridge->b_int_device;
171 device &= ~(7 << (pin*3));
172 device |= (pin << (pin*3));
173 bridge->b_int_device = device;
174
175 bridge->b_wid_tflush;
176
177 intr_connect_level(cpu, swlevel);
178
179 return 0; /* Never anything pending. */
180 }
181
182 /* Shutdown one of the (PCI ...) IRQs routes over a bridge. */
shutdown_bridge_irq(struct irq_data * d)183 static void shutdown_bridge_irq(struct irq_data *d)
184 {
185 struct bridge_controller *bc = IRQ_TO_BRIDGE(d->irq);
186 bridge_t *bridge = bc->base;
187 int pin, swlevel;
188 cpuid_t cpu;
189
190 pr_debug("bridge_shutdown: irq 0x%x\n", d->irq);
191 pin = SLOT_FROM_PCI_IRQ(d->irq);
192
193 /*
194 * map irq to a swlevel greater than 6 since the first 6 bits
195 * of INT_PEND0 are taken
196 */
197 swlevel = find_level(&cpu, d->irq);
198 intr_disconnect_level(cpu, swlevel);
199
200 bridge->b_int_enable &= ~(1 << pin);
201 bridge->b_wid_tflush;
202 }
203
enable_bridge_irq(struct irq_data * d)204 static inline void enable_bridge_irq(struct irq_data *d)
205 {
206 cpuid_t cpu;
207 int swlevel;
208
209 swlevel = find_level(&cpu, d->irq); /* Criminal offence */
210 intr_connect_level(cpu, swlevel);
211 }
212
disable_bridge_irq(struct irq_data * d)213 static inline void disable_bridge_irq(struct irq_data *d)
214 {
215 cpuid_t cpu;
216 int swlevel;
217
218 swlevel = find_level(&cpu, d->irq); /* Criminal offence */
219 intr_disconnect_level(cpu, swlevel);
220 }
221
222 static struct irq_chip bridge_irq_type = {
223 .name = "bridge",
224 .irq_startup = startup_bridge_irq,
225 .irq_shutdown = shutdown_bridge_irq,
226 .irq_mask = disable_bridge_irq,
227 .irq_unmask = enable_bridge_irq,
228 };
229
register_bridge_irq(unsigned int irq)230 void register_bridge_irq(unsigned int irq)
231 {
232 irq_set_chip_and_handler(irq, &bridge_irq_type, handle_level_irq);
233 }
234
request_bridge_irq(struct bridge_controller * bc)235 int request_bridge_irq(struct bridge_controller *bc)
236 {
237 int irq = allocate_irqno();
238 int swlevel, cpu;
239 nasid_t nasid;
240
241 if (irq < 0)
242 return irq;
243
244 /*
245 * "map" irq to a swlevel greater than 6 since the first 6 bits
246 * of INT_PEND0 are taken
247 */
248 cpu = bc->irq_cpu;
249 swlevel = alloc_level(cpu, irq);
250 if (unlikely(swlevel < 0)) {
251 free_irqno(irq);
252
253 return -EAGAIN;
254 }
255
256 /* Make sure it's not already pending when we connect it. */
257 nasid = COMPACT_TO_NASID_NODEID(cpu_to_node(cpu));
258 REMOTE_HUB_CLR_INTR(nasid, swlevel);
259
260 intr_connect_level(cpu, swlevel);
261
262 register_bridge_irq(irq);
263
264 return irq;
265 }
266