• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1/*
2 * Common support for CompuLab CM-T3x CoMs
3 */
4
5/ {
6
7	memory {
8		device_type = "memory";
9		reg = <0x80000000 0x10000000>; /* 256 MB */
10	};
11
12	leds {
13		compatible = "gpio-leds";
14		pinctrl-names = "default";
15		pinctrl-0 = <&green_led_pins>;
16		ledb {
17			label = "cm-t3x:green";
18			gpios = <&gpio6 26 GPIO_ACTIVE_HIGH>;  /* gpio186 */
19			linux,default-trigger = "heartbeat";
20		};
21	};
22
23	/* HS USB Port 1 Power */
24	hsusb1_power: hsusb1_power_reg {
25		compatible = "regulator-fixed";
26		regulator-name = "hsusb1_vbus";
27		regulator-min-microvolt = <3300000>;
28		regulator-max-microvolt = <3300000>;
29		startup-delay-us = <70000>;
30	};
31
32	/* HS USB Port 2 Power */
33	hsusb2_power: hsusb2_power_reg {
34		compatible = "regulator-fixed";
35		regulator-name = "hsusb2_vbus";
36		regulator-min-microvolt = <3300000>;
37		regulator-max-microvolt = <3300000>;
38		startup-delay-us = <70000>;
39	};
40
41	/* HS USB Host PHY on PORT 1 */
42	hsusb1_phy: hsusb1_phy {
43		compatible = "usb-nop-xceiv";
44		vcc-supply = <&hsusb1_power>;
45	};
46
47	/* HS USB Host PHY on PORT 2 */
48	hsusb2_phy: hsusb2_phy {
49		compatible = "usb-nop-xceiv";
50		vcc-supply = <&hsusb2_power>;
51	};
52
53	ads7846reg: ads7846-reg {
54		compatible = "regulator-fixed";
55		regulator-name = "ads7846-reg";
56		regulator-min-microvolt = <3300000>;
57		regulator-max-microvolt = <3300000>;
58	};
59
60	tv0: connector@1 {
61		compatible = "svideo-connector";
62		label = "tv";
63
64		port {
65			tv_connector_in: endpoint {
66				remote-endpoint = <&venc_out>;
67			};
68		};
69	};
70};
71
72&omap3_pmx_core {
73
74	uart3_pins: pinmux_uart3_pins {
75		pinctrl-single,pins = <
76			OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT  | MUX_MODE0)	/* uart3_rx_irrx.uart3_rx_irrx */
77			OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)	/* uart3_tx_irtx.uart3_tx_irtx */
78		>;
79	};
80
81	mmc1_pins: pinmux_mmc1_pins {
82		pinctrl-single,pins = <
83			OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
84			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd.sdmmc1_cmd */
85			OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat0.sdmmc1_dat0 */
86			OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat1.sdmmc1_dat1 */
87			OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat2.sdmmc1_dat2 */
88			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat3.sdmmc1_dat3 */
89		>;
90	};
91
92	green_led_pins: pinmux_green_led_pins {
93		pinctrl-single,pins = <
94			OMAP3_CORE1_IOPAD(0x21e2, PIN_OUTPUT | MUX_MODE4)	/* sys_clkout2.gpio_186 */
95		>;
96	};
97
98	dss_dpi_pins_common: pinmux_dss_dpi_pins_common {
99		pinctrl-single,pins = <
100			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)	/* dss_pclk.dss_pclk */
101			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)	/* dss_hsync.dss_hsync */
102			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0)	/* dss_vsync.dss_vsync */
103			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0)	/* dss_acbias.dss_acbias */
104
105			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0)	/* dss_data6.dss_data6 */
106			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0)	/* dss_data7.dss_data7 */
107			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0)	/* dss_data8.dss_data8 */
108			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0)	/* dss_data9.dss_data9 */
109			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0)	/* dss_data10.dss_data10 */
110			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0)	/* dss_data11.dss_data11 */
111			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0)	/* dss_data12.dss_data12 */
112			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0)	/* dss_data13.dss_data13 */
113			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0)	/* dss_data14.dss_data14 */
114			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)	/* dss_data15.dss_data15 */
115			OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0)	/* dss_data16.dss_data16 */
116			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0)	/* dss_data17.dss_data17 */
117			OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0)	/* dss_data18.dss_data18 */
118			OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0)	/* dss_data19.dss_data19 */
119			OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0)	/* dss_data20.dss_data20 */
120			OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0)	/* dss_data21.dss_data21 */
121			OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0)	/* dss_data22.dss_data22 */
122			OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0)	/* dss_data23.dss_data23 */
123		>;
124	};
125
126	dss_dpi_pins_cm_t35x: pinmux_dss_dpi_pins_cm_t35x {
127		pinctrl-single,pins = <
128			OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0)	/* dss_data0.dss_data0 */
129			OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0)	/* dss_data1.dss_data1 */
130			OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0)	/* dss_data2.dss_data2 */
131			OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0)	/* dss_data3.dss_data3 */
132			OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0)	/* dss_data4.dss_data4 */
133			OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0)	/* dss_data5.dss_data5 */
134		>;
135	};
136
137	ads7846_pins: pinmux_ads7846_pins {
138		pinctrl-single,pins = <
139			OMAP3_CORE1_IOPAD(0x20ba, PIN_INPUT_PULLUP | MUX_MODE4)	/* gpmc_ncs6.gpio_57 */
140		>;
141	};
142
143	mcspi1_pins: pinmux_mcspi1_pins {
144		pinctrl-single,pins = <
145			OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0)	/* mcspi1_clk */
146			OMAP3_CORE1_IOPAD(0x21ca, PIN_INPUT | MUX_MODE0)	/* mcspi1_simo */
147			OMAP3_CORE1_IOPAD(0x21cc, PIN_INPUT | MUX_MODE0)	/* mcspi1_somi */
148			OMAP3_CORE1_IOPAD(0x21ce, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcspi1_cs0 */
149		>;
150	};
151
152	i2c1_pins: pinmux_i2c1_pins {
153		pinctrl-single,pins = <
154			OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl */
155			OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda */
156		>;
157	};
158
159	mcbsp2_pins: pinmux_mcbsp2_pins {
160		pinctrl-single,pins = <
161			OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0)	/* mcbsp2_fsx */
162			OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0)	/* mcbsp2_clkx */
163			OMAP3_CORE1_IOPAD(0x2140, PIN_INPUT | MUX_MODE0)	/* mcbsp2_dr */
164			OMAP3_CORE1_IOPAD(0x2142, PIN_OUTPUT | MUX_MODE0)	/* mcbsp2_dx */
165		>;
166	};
167};
168
169&uart3 {
170	pinctrl-names = "default";
171	pinctrl-0 = <&uart3_pins>;
172};
173
174&mmc1 {
175	pinctrl-names = "default";
176	pinctrl-0 = <&mmc1_pins>;
177	bus-width = <4>;
178};
179
180&mmc3 {
181	status = "disabled";
182};
183
184&i2c1 {
185	pinctrl-names = "default";
186	pinctrl-0 = <&i2c1_pins>;
187
188	clock-frequency = <400000>;
189
190	at24@50 {
191		compatible = "at24,24c02";
192		pagesize = <16>;
193		reg = <0x50>;
194	};
195};
196
197&i2c3 {
198	clock-frequency = <400000>;
199};
200
201&usbhshost {
202	port1-mode = "ehci-phy";
203	port2-mode = "ehci-phy";
204};
205
206&usbhsehci {
207	phys = <&hsusb1_phy &hsusb2_phy>;
208};
209
210&mcspi1 {
211	pinctrl-names = "default";
212	pinctrl-0 = <&mcspi1_pins>;
213
214	/* touch controller */
215	ads7846@0 {
216		pinctrl-names = "default";
217		pinctrl-0 = <&ads7846_pins>;
218
219		compatible = "ti,ads7846";
220		vcc-supply = <&ads7846reg>;
221
222		reg = <0>;			/* CS0 */
223		spi-max-frequency = <1500000>;
224
225		interrupt-parent = <&gpio2>;
226		interrupts = <25 0>;		/* gpio_57 */
227		pendown-gpio = <&gpio2 25 GPIO_ACTIVE_HIGH>;
228
229		ti,x-min = /bits/ 16 <0x0>;
230		ti,x-max = /bits/ 16 <0x0fff>;
231		ti,y-min = /bits/ 16 <0x0>;
232		ti,y-max = /bits/ 16 <0x0fff>;
233
234		ti,x-plate-ohms = /bits/ 16 <180>;
235		ti,pressure-max = /bits/ 16 <255>;
236
237		ti,debounce-max = /bits/ 16 <30>;
238		ti,debounce-tol = /bits/ 16 <10>;
239		ti,debounce-rep = /bits/ 16 <1>;
240
241		linux,wakeup;
242	};
243};
244
245&venc {
246	status = "ok";
247
248	port {
249		venc_out: endpoint {
250			remote-endpoint = <&tv_connector_in>;
251			ti,channels = <2>;
252		};
253	};
254};
255
256&mcbsp2 {
257	status = "ok";
258
259	pinctrl-names = "default";
260	pinctrl-0 = <&mcbsp2_pins>;
261};
262
263&gpmc {
264	ranges = <0 0 0x00000000 0x01000000>;
265
266	nand@0,0 {
267		reg = <0 0 4>;	/* CS0, offset 0, IO size 4 */
268		nand-bus-width = <8>;
269		gpmc,device-width = <1>;
270		ti,nand-ecc-opt = "sw";
271
272		gpmc,cs-on-ns = <0>;
273		gpmc,cs-rd-off-ns = <120>;
274		gpmc,cs-wr-off-ns = <120>;
275
276		gpmc,adv-on-ns = <0>;
277		gpmc,adv-rd-off-ns = <120>;
278		gpmc,adv-wr-off-ns = <120>;
279
280		gpmc,we-on-ns = <6>;
281		gpmc,we-off-ns = <90>;
282
283		gpmc,oe-on-ns = <6>;
284		gpmc,oe-off-ns = <90>;
285
286		gpmc,page-burst-access-ns = <6>;
287		gpmc,access-ns = <72>;
288		gpmc,cycle2cycle-delay-ns = <60>;
289
290		gpmc,rd-cycle-ns = <120>;
291		gpmc,wr-cycle-ns = <120>;
292		gpmc,wr-access-ns = <186>;
293		gpmc,wr-data-mux-bus-ns = <90>;
294
295		#address-cells = <1>;
296		#size-cells = <1>;
297
298		partition@0 {
299			label = "xloader";
300			reg = <0 0x80000>;
301		};
302		partition@0x80000 {
303			label = "uboot";
304			reg = <0x80000 0x1e0000>;
305		};
306		partition@0x260000 {
307			label = "uboot environment";
308			reg = <0x260000 0x40000>;
309		};
310		partition@0x2a0000 {
311			label = "linux";
312			reg = <0x2a0000 0x400000>;
313		};
314		partition@0x6a0000 {
315			label = "rootfs";
316			reg = <0x6a0000 0x1f880000>;
317		};
318	};
319};
320