1 #ifndef _UAPI_PARISC_PDC_H 2 #define _UAPI_PARISC_PDC_H 3 4 /* 5 * PDC return values ... 6 * All PDC calls return a subset of these errors. 7 */ 8 9 #define PDC_WARN 3 /* Call completed with a warning */ 10 #define PDC_REQ_ERR_1 2 /* See above */ 11 #define PDC_REQ_ERR_0 1 /* Call would generate a requestor error */ 12 #define PDC_OK 0 /* Call completed successfully */ 13 #define PDC_BAD_PROC -1 /* Called non-existent procedure*/ 14 #define PDC_BAD_OPTION -2 /* Called with non-existent option */ 15 #define PDC_ERROR -3 /* Call could not complete without an error */ 16 #define PDC_NE_MOD -5 /* Module not found */ 17 #define PDC_NE_CELL_MOD -7 /* Cell module not found */ 18 #define PDC_INVALID_ARG -10 /* Called with an invalid argument */ 19 #define PDC_BUS_POW_WARN -12 /* Call could not complete in allowed power budget */ 20 #define PDC_NOT_NARROW -17 /* Narrow mode not supported */ 21 22 /* 23 * PDC entry points... 24 */ 25 26 #define PDC_POW_FAIL 1 /* perform a power-fail */ 27 #define PDC_POW_FAIL_PREPARE 0 /* prepare for powerfail */ 28 29 #define PDC_CHASSIS 2 /* PDC-chassis functions */ 30 #define PDC_CHASSIS_DISP 0 /* update chassis display */ 31 #define PDC_CHASSIS_WARN 1 /* return chassis warnings */ 32 #define PDC_CHASSIS_DISPWARN 2 /* update&return chassis status */ 33 #define PDC_RETURN_CHASSIS_INFO 128 /* HVERSION dependent: return chassis LED/LCD info */ 34 35 #define PDC_PIM 3 /* Get PIM data */ 36 #define PDC_PIM_HPMC 0 /* Transfer HPMC data */ 37 #define PDC_PIM_RETURN_SIZE 1 /* Get Max buffer needed for PIM*/ 38 #define PDC_PIM_LPMC 2 /* Transfer HPMC data */ 39 #define PDC_PIM_SOFT_BOOT 3 /* Transfer Soft Boot data */ 40 #define PDC_PIM_TOC 4 /* Transfer TOC data */ 41 42 #define PDC_MODEL 4 /* PDC model information call */ 43 #define PDC_MODEL_INFO 0 /* returns information */ 44 #define PDC_MODEL_BOOTID 1 /* set the BOOT_ID */ 45 #define PDC_MODEL_VERSIONS 2 /* returns cpu-internal versions*/ 46 #define PDC_MODEL_SYSMODEL 3 /* return system model info */ 47 #define PDC_MODEL_ENSPEC 4 /* enable specific option */ 48 #define PDC_MODEL_DISPEC 5 /* disable specific option */ 49 #define PDC_MODEL_CPU_ID 6 /* returns cpu-id (only newer machines!) */ 50 #define PDC_MODEL_CAPABILITIES 7 /* returns OS32/OS64-flags */ 51 /* Values for PDC_MODEL_CAPABILITIES non-equivalent virtual aliasing support */ 52 #define PDC_MODEL_OS64 (1 << 0) 53 #define PDC_MODEL_OS32 (1 << 1) 54 #define PDC_MODEL_IOPDIR_FDC (1 << 2) 55 #define PDC_MODEL_NVA_MASK (3 << 4) 56 #define PDC_MODEL_NVA_SUPPORTED (0 << 4) 57 #define PDC_MODEL_NVA_SLOW (1 << 4) 58 #define PDC_MODEL_NVA_UNSUPPORTED (3 << 4) 59 #define PDC_MODEL_GET_BOOT__OP 8 /* returns boot test options */ 60 #define PDC_MODEL_SET_BOOT__OP 9 /* set boot test options */ 61 62 #define PA89_INSTRUCTION_SET 0x4 /* capatibilies returned */ 63 #define PA90_INSTRUCTION_SET 0x8 64 65 #define PDC_CACHE 5 /* return/set cache (& TLB) info*/ 66 #define PDC_CACHE_INFO 0 /* returns information */ 67 #define PDC_CACHE_SET_COH 1 /* set coherence state */ 68 #define PDC_CACHE_RET_SPID 2 /* returns space-ID bits */ 69 70 #define PDC_HPA 6 /* return HPA of processor */ 71 #define PDC_HPA_PROCESSOR 0 72 #define PDC_HPA_MODULES 1 73 74 #define PDC_COPROC 7 /* Co-Processor (usually FP unit(s)) */ 75 #define PDC_COPROC_CFG 0 /* Co-Processor Cfg (FP unit(s) enabled?) */ 76 77 #define PDC_IODC 8 /* talk to IODC */ 78 #define PDC_IODC_READ 0 /* read IODC entry point */ 79 /* PDC_IODC_RI_ * INDEX parameter of PDC_IODC_READ */ 80 #define PDC_IODC_RI_DATA_BYTES 0 /* IODC Data Bytes */ 81 /* 1, 2 obsolete - HVERSION dependent*/ 82 #define PDC_IODC_RI_INIT 3 /* Initialize module */ 83 #define PDC_IODC_RI_IO 4 /* Module input/output */ 84 #define PDC_IODC_RI_SPA 5 /* Module input/output */ 85 #define PDC_IODC_RI_CONFIG 6 /* Module input/output */ 86 /* 7 obsolete - HVERSION dependent */ 87 #define PDC_IODC_RI_TEST 8 /* Module input/output */ 88 #define PDC_IODC_RI_TLB 9 /* Module input/output */ 89 #define PDC_IODC_NINIT 2 /* non-destructive init */ 90 #define PDC_IODC_DINIT 3 /* destructive init */ 91 #define PDC_IODC_MEMERR 4 /* check for memory errors */ 92 #define PDC_IODC_INDEX_DATA 0 /* get first 16 bytes from mod IODC */ 93 #define PDC_IODC_BUS_ERROR -4 /* bus error return value */ 94 #define PDC_IODC_INVALID_INDEX -5 /* invalid index return value */ 95 #define PDC_IODC_COUNT -6 /* count is too small */ 96 97 #define PDC_TOD 9 /* time-of-day clock (TOD) */ 98 #define PDC_TOD_READ 0 /* read TOD */ 99 #define PDC_TOD_WRITE 1 /* write TOD */ 100 101 102 #define PDC_STABLE 10 /* stable storage (sprockets) */ 103 #define PDC_STABLE_READ 0 104 #define PDC_STABLE_WRITE 1 105 #define PDC_STABLE_RETURN_SIZE 2 106 #define PDC_STABLE_VERIFY_CONTENTS 3 107 #define PDC_STABLE_INITIALIZE 4 108 109 #define PDC_NVOLATILE 11 /* often not implemented */ 110 111 #define PDC_ADD_VALID 12 /* Memory validation PDC call */ 112 #define PDC_ADD_VALID_VERIFY 0 /* Make PDC_ADD_VALID verify region */ 113 114 #define PDC_INSTR 15 /* get instr to invoke PDCE_CHECK() */ 115 116 #define PDC_PROC 16 /* (sprockets) */ 117 118 #define PDC_CONFIG 16 /* (sprockets) */ 119 #define PDC_CONFIG_DECONFIG 0 120 #define PDC_CONFIG_DRECONFIG 1 121 #define PDC_CONFIG_DRETURN_CONFIG 2 122 123 #define PDC_BLOCK_TLB 18 /* manage hardware block-TLB */ 124 #define PDC_BTLB_INFO 0 /* returns parameter */ 125 #define PDC_BTLB_INSERT 1 /* insert BTLB entry */ 126 #define PDC_BTLB_PURGE 2 /* purge BTLB entries */ 127 #define PDC_BTLB_PURGE_ALL 3 /* purge all BTLB entries */ 128 129 #define PDC_TLB 19 /* manage hardware TLB miss handling */ 130 #define PDC_TLB_INFO 0 /* returns parameter */ 131 #define PDC_TLB_SETUP 1 /* set up miss handling */ 132 133 #define PDC_MEM 20 /* Manage memory */ 134 #define PDC_MEM_MEMINFO 0 135 #define PDC_MEM_ADD_PAGE 1 136 #define PDC_MEM_CLEAR_PDT 2 137 #define PDC_MEM_READ_PDT 3 138 #define PDC_MEM_RESET_CLEAR 4 139 #define PDC_MEM_GOODMEM 5 140 #define PDC_MEM_TABLE 128 /* Non contig mem map (sprockets) */ 141 #define PDC_MEM_RETURN_ADDRESS_TABLE PDC_MEM_TABLE 142 #define PDC_MEM_GET_MEMORY_SYSTEM_TABLES_SIZE 131 143 #define PDC_MEM_GET_MEMORY_SYSTEM_TABLES 132 144 #define PDC_MEM_GET_PHYSICAL_LOCATION_FROM_MEMORY_ADDRESS 133 145 146 #define PDC_MEM_RET_SBE_REPLACED 5 /* PDC_MEM return values */ 147 #define PDC_MEM_RET_DUPLICATE_ENTRY 4 148 #define PDC_MEM_RET_BUF_SIZE_SMALL 1 149 #define PDC_MEM_RET_PDT_FULL -11 150 #define PDC_MEM_RET_INVALID_PHYSICAL_LOCATION ~0ULL 151 152 #define PDC_PSW 21 /* Get/Set default System Mask */ 153 #define PDC_PSW_MASK 0 /* Return mask */ 154 #define PDC_PSW_GET_DEFAULTS 1 /* Return defaults */ 155 #define PDC_PSW_SET_DEFAULTS 2 /* Set default */ 156 #define PDC_PSW_ENDIAN_BIT 1 /* set for big endian */ 157 #define PDC_PSW_WIDE_BIT 2 /* set for wide mode */ 158 159 #define PDC_SYSTEM_MAP 22 /* find system modules */ 160 #define PDC_FIND_MODULE 0 161 #define PDC_FIND_ADDRESS 1 162 #define PDC_TRANSLATE_PATH 2 163 164 #define PDC_SOFT_POWER 23 /* soft power switch */ 165 #define PDC_SOFT_POWER_INFO 0 /* return info about the soft power switch */ 166 #define PDC_SOFT_POWER_ENABLE 1 /* enable/disable soft power switch */ 167 168 169 /* HVERSION dependent */ 170 171 /* The PDC_MEM_MAP calls */ 172 #define PDC_MEM_MAP 128 /* on s700: return page info */ 173 #define PDC_MEM_MAP_HPA 0 /* returns hpa of a module */ 174 175 #define PDC_EEPROM 129 /* EEPROM access */ 176 #define PDC_EEPROM_READ_WORD 0 177 #define PDC_EEPROM_WRITE_WORD 1 178 #define PDC_EEPROM_READ_BYTE 2 179 #define PDC_EEPROM_WRITE_BYTE 3 180 #define PDC_EEPROM_EEPROM_PASSWORD -1000 181 182 #define PDC_NVM 130 /* NVM (non-volatile memory) access */ 183 #define PDC_NVM_READ_WORD 0 184 #define PDC_NVM_WRITE_WORD 1 185 #define PDC_NVM_READ_BYTE 2 186 #define PDC_NVM_WRITE_BYTE 3 187 188 #define PDC_SEED_ERROR 132 /* (sprockets) */ 189 190 #define PDC_IO 135 /* log error info, reset IO system */ 191 #define PDC_IO_READ_AND_CLEAR_ERRORS 0 192 #define PDC_IO_RESET 1 193 #define PDC_IO_RESET_DEVICES 2 194 /* sets bits 6&7 (little endian) of the HcControl Register */ 195 #define PDC_IO_USB_SUSPEND 0xC000000000000000 196 #define PDC_IO_EEPROM_IO_ERR_TABLE_FULL -5 /* return value */ 197 #define PDC_IO_NO_SUSPEND -6 /* return value */ 198 199 #define PDC_BROADCAST_RESET 136 /* reset all processors */ 200 #define PDC_DO_RESET 0 /* option: perform a broadcast reset */ 201 #define PDC_DO_FIRM_TEST_RESET 1 /* Do broadcast reset with bitmap */ 202 #define PDC_BR_RECONFIGURATION 2 /* reset w/reconfiguration */ 203 #define PDC_FIRM_TEST_MAGIC 0xab9ec36fUL /* for this reboot only */ 204 205 #define PDC_LAN_STATION_ID 138 /* Hversion dependent mechanism for */ 206 #define PDC_LAN_STATION_ID_READ 0 /* getting the lan station address */ 207 208 #define PDC_LAN_STATION_ID_SIZE 6 209 210 #define PDC_CHECK_RANGES 139 /* (sprockets) */ 211 212 #define PDC_NV_SECTIONS 141 /* (sprockets) */ 213 214 #define PDC_PERFORMANCE 142 /* performance monitoring */ 215 216 #define PDC_SYSTEM_INFO 143 /* system information */ 217 #define PDC_SYSINFO_RETURN_INFO_SIZE 0 218 #define PDC_SYSINFO_RRETURN_SYS_INFO 1 219 #define PDC_SYSINFO_RRETURN_ERRORS 2 220 #define PDC_SYSINFO_RRETURN_WARNINGS 3 221 #define PDC_SYSINFO_RETURN_REVISIONS 4 222 #define PDC_SYSINFO_RRETURN_DIAGNOSE 5 223 #define PDC_SYSINFO_RRETURN_HV_DIAGNOSE 1005 224 225 #define PDC_RDR 144 /* (sprockets) */ 226 #define PDC_RDR_READ_BUFFER 0 227 #define PDC_RDR_READ_SINGLE 1 228 #define PDC_RDR_WRITE_SINGLE 2 229 230 #define PDC_INTRIGUE 145 /* (sprockets) */ 231 #define PDC_INTRIGUE_WRITE_BUFFER 0 232 #define PDC_INTRIGUE_GET_SCRATCH_BUFSIZE 1 233 #define PDC_INTRIGUE_START_CPU_COUNTERS 2 234 #define PDC_INTRIGUE_STOP_CPU_COUNTERS 3 235 236 #define PDC_STI 146 /* STI access */ 237 /* same as PDC_PCI_XXX values (see below) */ 238 239 /* Legacy PDC definitions for same stuff */ 240 #define PDC_PCI_INDEX 147 241 #define PDC_PCI_INTERFACE_INFO 0 242 #define PDC_PCI_SLOT_INFO 1 243 #define PDC_PCI_INFLIGHT_BYTES 2 244 #define PDC_PCI_READ_CONFIG 3 245 #define PDC_PCI_WRITE_CONFIG 4 246 #define PDC_PCI_READ_PCI_IO 5 247 #define PDC_PCI_WRITE_PCI_IO 6 248 #define PDC_PCI_READ_CONFIG_DELAY 7 249 #define PDC_PCI_UPDATE_CONFIG_DELAY 8 250 #define PDC_PCI_PCI_PATH_TO_PCI_HPA 9 251 #define PDC_PCI_PCI_HPA_TO_PCI_PATH 10 252 #define PDC_PCI_PCI_PATH_TO_PCI_BUS 11 253 #define PDC_PCI_PCI_RESERVED 12 254 #define PDC_PCI_PCI_INT_ROUTE_SIZE 13 255 #define PDC_PCI_GET_INT_TBL_SIZE PDC_PCI_PCI_INT_ROUTE_SIZE 256 #define PDC_PCI_PCI_INT_ROUTE 14 257 #define PDC_PCI_GET_INT_TBL PDC_PCI_PCI_INT_ROUTE 258 #define PDC_PCI_READ_MON_TYPE 15 259 #define PDC_PCI_WRITE_MON_TYPE 16 260 261 262 /* Get SCSI Interface Card info: SDTR, SCSI ID, mode (SE vs LVD) */ 263 #define PDC_INITIATOR 163 264 #define PDC_GET_INITIATOR 0 265 #define PDC_SET_INITIATOR 1 266 #define PDC_DELETE_INITIATOR 2 267 #define PDC_RETURN_TABLE_SIZE 3 268 #define PDC_RETURN_TABLE 4 269 270 #define PDC_LINK 165 /* (sprockets) */ 271 #define PDC_LINK_PCI_ENTRY_POINTS 0 /* list (Arg1) = 0 */ 272 #define PDC_LINK_USB_ENTRY_POINTS 1 /* list (Arg1) = 1 */ 273 274 /* cl_class 275 * page 3-33 of IO-Firmware ARS 276 * IODC ENTRY_INIT(Search first) RET[1] 277 */ 278 #define CL_NULL 0 /* invalid */ 279 #define CL_RANDOM 1 /* random access (as disk) */ 280 #define CL_SEQU 2 /* sequential access (as tape) */ 281 #define CL_DUPLEX 7 /* full-duplex point-to-point (RS-232, Net) */ 282 #define CL_KEYBD 8 /* half-duplex console (HIL Keyboard) */ 283 #define CL_DISPL 9 /* half-duplex console (display) */ 284 #define CL_FC 10 /* FiberChannel access media */ 285 286 /* IODC ENTRY_INIT() */ 287 #define ENTRY_INIT_SRCH_FRST 2 288 #define ENTRY_INIT_SRCH_NEXT 3 289 #define ENTRY_INIT_MOD_DEV 4 290 #define ENTRY_INIT_DEV 5 291 #define ENTRY_INIT_MOD 6 292 #define ENTRY_INIT_MSG 9 293 294 /* IODC ENTRY_IO() */ 295 #define ENTRY_IO_BOOTIN 0 296 #define ENTRY_IO_BOOTOUT 1 297 #define ENTRY_IO_CIN 2 298 #define ENTRY_IO_COUT 3 299 #define ENTRY_IO_CLOSE 4 300 #define ENTRY_IO_GETMSG 9 301 #define ENTRY_IO_BBLOCK_IN 16 302 #define ENTRY_IO_BBLOCK_OUT 17 303 304 /* IODC ENTRY_SPA() */ 305 306 /* IODC ENTRY_CONFIG() */ 307 308 /* IODC ENTRY_TEST() */ 309 310 /* IODC ENTRY_TLB() */ 311 312 /* constants for OS (NVM...) */ 313 #define OS_ID_NONE 0 /* Undefined OS ID */ 314 #define OS_ID_HPUX 1 /* HP-UX OS */ 315 #define OS_ID_MPEXL 2 /* MPE XL OS */ 316 #define OS_ID_OSF 3 /* OSF OS */ 317 #define OS_ID_HPRT 4 /* HP-RT OS */ 318 #define OS_ID_NOVEL 5 /* NOVELL OS */ 319 #define OS_ID_LINUX 6 /* Linux */ 320 321 322 /* constants for PDC_CHASSIS */ 323 #define OSTAT_OFF 0 324 #define OSTAT_FLT 1 325 #define OSTAT_TEST 2 326 #define OSTAT_INIT 3 327 #define OSTAT_SHUT 4 328 #define OSTAT_WARN 5 329 #define OSTAT_RUN 6 330 #define OSTAT_ON 7 331 332 /* Page Zero constant offsets used by the HPMC handler */ 333 #define BOOT_CONSOLE_HPA_OFFSET 0x3c0 334 #define BOOT_CONSOLE_SPA_OFFSET 0x3c4 335 #define BOOT_CONSOLE_PATH_OFFSET 0x3a8 336 337 /* size of the pdc_result buffer for firmware.c */ 338 #define NUM_PDC_RESULT 32 339 340 #if !defined(__ASSEMBLY__) 341 342 #include <linux/types.h> 343 344 345 /* flags of the device_path */ 346 #define PF_AUTOBOOT 0x80 347 #define PF_AUTOSEARCH 0x40 348 #define PF_TIMER 0x0F 349 350 struct device_path { /* page 1-69 */ 351 unsigned char flags; /* flags see above! */ 352 unsigned char bc[6]; /* bus converter routing info */ 353 unsigned char mod; 354 unsigned int layers[6];/* device-specific layer-info */ 355 } __attribute__((aligned(8))) ; 356 357 struct pz_device { 358 struct device_path dp; /* see above */ 359 /* struct iomod *hpa; */ 360 unsigned int hpa; /* HPA base address */ 361 /* char *spa; */ 362 unsigned int spa; /* SPA base address */ 363 /* int (*iodc_io)(struct iomod*, ...); */ 364 unsigned int iodc_io; /* device entry point */ 365 short pad; /* reserved */ 366 unsigned short cl_class;/* see below */ 367 } __attribute__((aligned(8))) ; 368 369 struct zeropage { 370 /* [0x000] initialize vectors (VEC) */ 371 unsigned int vec_special; /* must be zero */ 372 /* int (*vec_pow_fail)(void);*/ 373 unsigned int vec_pow_fail; /* power failure handler */ 374 /* int (*vec_toc)(void); */ 375 unsigned int vec_toc; 376 unsigned int vec_toclen; 377 /* int (*vec_rendz)(void); */ 378 unsigned int vec_rendz; 379 int vec_pow_fail_flen; 380 int vec_pad[10]; 381 382 /* [0x040] reserved processor dependent */ 383 int pad0[112]; 384 385 /* [0x200] reserved */ 386 int pad1[84]; 387 388 /* [0x350] memory configuration (MC) */ 389 int memc_cont; /* contiguous mem size (bytes) */ 390 int memc_phsize; /* physical memory size */ 391 int memc_adsize; /* additional mem size, bytes of SPA space used by PDC */ 392 unsigned int mem_pdc_hi; /* used for 64-bit */ 393 394 /* [0x360] various parameters for the boot-CPU */ 395 /* unsigned int *mem_booterr[8]; */ 396 unsigned int mem_booterr[8]; /* ptr to boot errors */ 397 unsigned int mem_free; /* first location, where OS can be loaded */ 398 /* struct iomod *mem_hpa; */ 399 unsigned int mem_hpa; /* HPA of the boot-CPU */ 400 /* int (*mem_pdc)(int, ...); */ 401 unsigned int mem_pdc; /* PDC entry point */ 402 unsigned int mem_10msec; /* number of clock ticks in 10msec */ 403 404 /* [0x390] initial memory module (IMM) */ 405 /* struct iomod *imm_hpa; */ 406 unsigned int imm_hpa; /* HPA of the IMM */ 407 int imm_soft_boot; /* 0 = was hard boot, 1 = was soft boot */ 408 unsigned int imm_spa_size; /* SPA size of the IMM in bytes */ 409 unsigned int imm_max_mem; /* bytes of mem in IMM */ 410 411 /* [0x3A0] boot console, display device and keyboard */ 412 struct pz_device mem_cons; /* description of console device */ 413 struct pz_device mem_boot; /* description of boot device */ 414 struct pz_device mem_kbd; /* description of keyboard device */ 415 416 /* [0x430] reserved */ 417 int pad430[116]; 418 419 /* [0x600] processor dependent */ 420 __u32 pad600[1]; 421 __u32 proc_sti; /* pointer to STI ROM */ 422 __u32 pad608[126]; 423 }; 424 425 #endif /* !defined(__ASSEMBLY__) */ 426 427 #endif /* _UAPI_PARISC_PDC_H */ 428